TAKEOFF CATALOg

Transcription

TAKEOFF CATALOg

“Customer Service is Our Goal”
E-Zee Milking Equipment, LLC
Here to serve the dairy industry
2012 TAKEOFF CATALOg
~neW ~ uSed ~ rebuilt~ and PartS
3910 E. Newport Road • Gordonville, PA 17529
Phone: 800-768-6166 • Fax: 717-768-7586
Email: [email protected]
“Customer Service is Our Goal”
E-Zee Milking Equipment, LLC
Here to serve the dairy industry
TAKEOFF CATALOg
~neW ~ uSed ~ rebuilt~ and PartS
INDEX
bouMatic ........................................................................ Page 3-15
delaVal®.......................................................................... Page 16-21
WeStfalia®....................................................................... Page 22-29
SurGe®............................................................................. Page 30-36
nuPulSe®..........................................................................Page 36
Waikato®.......................................................................... Page 37
uniVerSal®........................................................................ Page 38-41
kleen-flo®....................................................................... Page 42-43
MiScellaneouS takeoff PartS.......................................... Page 44-46
coPy rePlaceMent labelS................................................ Page 47
order forM......................................................................Page 48
®
This catalog consists of used and rebuilt takeoffs, however, we cannot guarantee stock and availability
on any items. Some takeoffs are almost always available while others are rarely available.
The ones that are rarely available are usually labeled (RA).
ALL REBUILT TAKEOFFS COME WITH A 90 DAY WARRANTY - AFTER INSTALLATION
OR 6 MONTH MAXIMUM, FROM INvOICE dATE.
PLEASE NOTE: A lot of our new items are replacement copy parts, and are not oRiginal.
These NEW items have not been purchased from their original manufacturers
and the manufacturers names are being used as a reference, ONLY.
For further information please read our product disclaimer below.
PROdUCT dISCLAIMER - JANUARY 2012
Our products are sold with a thirty (30) Day Satisfaction Guarantee. If you receive any used equiment in non-working condition,
we will credit you 100% for it, if you notify us within thirty (30) days, except for special orders.
Unless otherwise specified, all electronic items are warranted for the shorter of ninety (90) days from the date of installation, or
six (6) months from the date of purchase. (Example: If the item you purchased is not installed for four (4) months after the invoice
date, then only two (2) months would remain under warranty.
Unless otherwise stated, items listed as “NEW” have not been purchased from the original manufacturers. Where an item is a
copy or reproduction of a brand name item it will usually be identified, but not in all cases, with the word “copy”, “aftermarket” or
“replacement”. Some rebuilt items are rebuilt with “copy” aftermarket parts. Such copies are not original to the manufacturer and
have not been licensed by, recommended or endorsed by the manufacturer. All trademarks and service marks are the property of
their respective owners.
E-Zee Milking Equipment LLC is not an authorized dealer or representitive for DeLaval®, Universal®, Westfalia®, Surge®, IBA®
and Bou-Matic®.
DeLaval™ and Universal™ are registered trademarks of DeLaval
Surge™ and Westfalia™ are registered trademarks of Westfalia-Surge Inc.
Bou-Matic™ is a registered Trademark of Bou Matic LLC.
2
1-800-768-6166
E-ZEE Milking EquipMEnt, llC ~ takEoff Division
fax: 717-768-7586
REBUILT BOUMATIC®
PERFECTION
3000M
 Software Upgradeable
1000 V
COMPANION
FOR STALL BARN
 Lightweight
durable design
 High Durabilty
 Adjustable milk
 Low Maintenance
letdown delay
 Full-Flow sensing
 Optional Ai
Airr Operation
 Non-restrictive
Detaching & Shutoff
shutoff
123390
123530
-3000M
All Vacuum
Operated
OPTIONAL vACUUM
SHUTOFFS
PLEASE SPECIFY WHEN
ORdERINg
78490
ALSO AvAILABLE
WITH MILK YIELd
INdICATOR
99150
plEasE spECifY CuRB Mount
oR linE Mount BRaCkEt
123410
- 3200M Vacuum Takeoff /Air Shutoff
123430
- 3400M - All Air Operated
1-800-768-6166
123535 Milk Yield
Indicator,
use this part
number in
addition to the
Takeoff Part #
Above
fax: 717-768-7586
3
REBUILT BOUMATIC® ALL AIR
both of theSe unitS are rebuilt With
NEW coPy air cylinderS and SolenoidS
2100D
2101D
 Heavy Duty Stainless
 Heavy Duty Stainless
Steel construction with
chain detaching
Steel construction with
chain detaching
 Comes standard
 Comes standard
with 5/8” sensor/shutoff
combo, and black chassis
circuit board
with 5/8” sensor/shutoff
combo, and black chassis
circuit board
 1/4” air line tubing
 Speed controller
123060*
123180*
see below
see below
OPTIONAL INTERCHANgEABLE BOARdS
also availaBlE
with USED OR NEW REPLACEMENT silver chassis
circuit board (as shown) for an additional cost
Use part 123375 - in addition with
Takeoff Part # above
*
plEasE spECifY usED oR nEW CopY WHEn oRDERing
tHEsE BoaRDs aRE also solD sEpaRatElY as nuMBERED BEloW.
85430 - New
Replacement
Circuit
Original silver board
board
with
stainless
with chassis
chassis ONLY
ONLY
123603 - Used
4
1-800-768-6166
fax: 717-768-7586
REBUILT BOUMATIC®
2000V
3000D
 Heavy Duty stainless
 Heavy Duty Stainless steel
steel construction
 Vacuum operated
cylinder
 Comes with a speed
control and a black
chassis circuit board
construction
 Box features the quick open
latches for quick and easy access
to the circuit board
 Humphrey 420 solenoid
 Comes with a speed control and
a silver chassis circuit board
123000*
see botttom of
page 4
123395
Vacuum Takeoff
Vacuum Shutoff
99777 - Solenoid
MUST BE USEd IF YOU
SELECT ONE
OF THE UPgRAdES
123420 - 3200D Vacuum Takeoff /Air Shutoff
123440 - 3400D - Air Takeoff /Air Shutoff
OPTIONAL INTERCHANgEABLE SENSOR/SHUTOFFS ANd SHUTOFFS ONLY
Curb Mount
Air Sensor/
shutoff
Curb Mount
Vacuum Sensor/
shutoff
99160 - 3/4”
plastic air operated
shutoff assembly
MOUNTING BRACKET NOT INCLUDED
91810 - 3” milk line
clamp with gasket
SUBJECT TO AvAILABLILITY
PLEASE SPECIFY WHEN ORdERINg
Line Mount Air
Sensor/shutoff
78490 - Vacuum
operated milk line shutoff
for 5/8” or 3/4” hose
~NORMALLY CLOSED~
99150 - 3/4”
plastic shutoff
assembly, vacuum
operated
MOUNTING BRACKET NOT INCLUDED
99173 - 3/4” curb
mount bracket
99172 - 5/8” curb
1-800-768-6166
mount bracket
Line Mount
Vacuum Sensor/
shutoff
OPTIONS FOR NORMALLY OPEN
FOR
3000 SERIES TAKEOFFS
78491 - Solenoid adaptor nipple for plastic
shutoff
78492 - 3/16” x 12”
hose for plastic shutoff to
solenoid adaptor nipple
99751 - Clear
shutoff diaphragm
fax: 717-768-7586
5
REBUILT BOUMATIC® - ALL vACUUM
4200D
4400D
123480
 Keypad style
controls
 Cylinder mount
solenoid
 3/4” line mount
123490
 Touch Sensitive Controls
 External indicator lamps
 Cylinder mount solenoid
 3/4” curb mount
sensor/shutoff
OPTIONAL:
3/4” curb mount
sensor/shutoff
6
1-800-768-6166
sensor/shutoff
OPTIONAL:
3/4” Line mount
sensor/shutoff
fax: 717-768-7586
REBUILT BOUMATIC®
4600D
4000D
 Air cylinder detaching
 Vacuum cylinder detaching
 Touch Sensitive Controls
 Keypad style controls
 External indicator lamps
 5/8” curb mount sensor
 Economical Unit
 3/4” curb mount
sensor/shutoff
123510
123450
OPTIONAL:
- 3/4” Line mount
sensor/shutoff
- Hose support arm
suBJECt to
availaBlilitY
Hose
Support
123660
This hose support is
available as an option for
BM Air Takeoffs
1-800-768-6166
fax: 717-768-7586
7
BOUMATIC® USEd PARTS
123795 - Used
keypad for
metering style
takeoff
123750
- Used Heavy
duty motor and
gearbox
123600
- Used black
style board
for 2000/2100
takeoff, 1½
minute
123635 - Used 2000V sensor
123605
- Used 5/8”
2100/2101
sensor
123630 Rebuilt 2000V
shutoff
8
1-800-768-6166
fax: 717-768-7586
TAKEOFFS FOR BOUMATIC
®
BouMatic® Used Parts
~ 2000 Series
123000 - Rebuilt 2000V w/ speed control, blue label, black board
123030 - Rebuilt 2000V w/o speed control, blue label, black board
123060 - Rebuilt 2100D w/NEW air cylinder & NEW solenoid, black board
123180 - Rebuilt 2101D w/NEW air cylinder & NEW solenoid, black board
123375 - Add per unit f/silver chassis board on 2000 series 123160 - Rebuilt 2100M w/Perfection meter 123335 - Rebuilt 2101M w/Perfection meter 123365 - Rebuilt 2000VM w/Perfection meter 123330 - Rebuilt 2101M w/Precision meter 123360 - Rebuilt 2000VM w/Precision meter NOTE: Precision is older style and Perfection is newer style
~ 3000 Series
123390 - Rebuilt 3000M w/Perfection meter, all vacuum 123395 - Rebuilt 3000D w/silver board, all vacuum 123410 - Rebuilt 3200M w/Perfection meter, vacuum takeoff, air shutoff 123420 - Rebuilt 3200D w/silver board, vacuum takeoff, air shutoff 123430 - Rebuilt 3400M w/Perfection meter all air 123440 - Rebuilt 3400D w/silver board all air ~ 4000 Series
123450 - Rebuilt 4000D 123480 - Rebuilt 4200D w/keypad control
123490 - Rebuilt 4400D w/touch sensitive control
123510 - Rebuilt 4600D
~ Portable Stall Barn Takeoff
123530 - Rebuilt 1000V Companion
123525 - Used 2” blue One Touch inlet for Companion
123526 - Used 2½” blue One Touch inlet for Companion
123527 - Used 3” blue One Touch inlet for Companion
123905 - 1000V Companion board
(IA)
(IA)
(IA)
(IA)
MISC. TAKEOFF PARTS
123600 - Used black style board for 2000/2100 takeoff, 1½ minute
123602 - Used black style board for 2000/2100 takeoff, 3 minute
123603 - Used silver style board for 2000/2100 takeoff
123910 - Used 4200/4400/4600 series circuit board
123610 - Used curb mount air sensor 123615 - Used line mount air sensor 123620 - Used curb mount vacuum sensor 123625 - Used line mount vacuum sensor 123605 - Used 5/8” 2100/2101 sensor
123630 - Rebuilt 2000V shutoff
123635 - Used 2000V sensor 123660 - Rebuilt 2100 hose support 123855 - Used 12 unit power supply for BM 123857 - Used 16 unit power supply for BM ~ Perfection Meter Parts
123800 - Used board 123805 - Rebuilt left hand meter 123810 - Rebuilt right hand meter 123815 - Rebuilt Perfection meter with circuit board 123835 - Used outlet assembly 123848 - Used butterfat sampler 123795 - Used keypad 123797 - Used white air shutoff 123799 - Used black air shutoff (IA)
(IA) (IA) (IA) (IA) (IA) (IA) (IA) (IA) (RA) ~ Precision Meter Parts
123720 - Used silver style board 123750 - Used heavy duty motor and gearbox 123758 - Used gearbox ONLY 123760 - Used heavy duty motor ONLY 123765 - Used rotor (IA) 123770 - Used reed switch assembly 123776 - Used jar for round style 123778 - Used jar for square style 123781 - Used lid for jar for round style 123783 - Used lid for jar for square style 123790 - Used clear 5/8” air shutoff 123793 - Used blue 9/16” air shutoff NOTE: older style is with round motor cover and newer style is with square motor cover
1-800-768-6166
E-Zee Milking Equipment, LLC ~ Takeoff Division
Fax: 717-768-7586
9
NEW REPLACEMENT PARTS THAT FIT BOUMATIC® TAKEOFFS
85335 - POWER SUPPLY FOR 16 TAKEOFF UNITS,
ALL STAINLESS BOX
REPLACEMENT PARTS FOR POWER SUPPLY
43112 - Rectifier, 35 amp
85306 - Capacitor with holder
85309 - 120 volt M.O.V.
85312 - Lightning arrestor
85314 - Line filter
85317 - Fuse holder
85323 - 5 AMP fuse
85321 - On/off toggle switch
91836 - Toggle switch cover
85325 - 120 volt AC input/11/24 volt AC
output transformer
99771 - 18” cylinder for 2100
99773 - 15” cylinder for 2700
99767
99766
- 3/4” x 1 7/8” stainless
flat washer for top
99768
- 3/4” x 16” stainless
hex jam nut for top
- 7/16” x 20” stainless
hex jam nut for rod
99804 - Stainless chain cut in 50” lengths for BM air takeoff
96030 - Stainless chain per foot
99387
- Amber LED
bulb only for
2000/2100
99385
- Clear
bulb for
2000/2100
10
1-800-768-6166
99388
- Red LED bulb
only for
2000/2100
99389
99390
- Replacement Amber
LED bulb, with 18” wire
- Replacement Red
LED bulb, with 18” wire
fax: 717-768-7586
85430 - New Style Kleen-Flo replacement Circuit Board
with stainless chassis for 2000 and 3000 Series
 Regulated valve and lamp outputs
 100 to 4,600 OHM sensitivity range
 1½ or 3 minute letdown time
 Features milk sweep function
 Incandescent/LED lamp capability
 Press either button when unit is in “sleep” mode, and it
goes into “wash” mode
2 YEAR WARRANTY
85437 Wiring harness for
85430 circuit board,
less board connector
97825 - 5” x 24” Tie rod air cylinder for BM crowd gate, 1 3/8” rod, copy
(includes clevis bracket)
MISCELLANEOUS PARTS
92241
92241 - Cylinder bottom (for 2000, 3000, 4200 and 4400)
98789 - ¼” Nylon rope (sold per foot)
99689 - Sealing washer (for 2000/3000 and 4200/4400 piston)
99703
99703 - Palm push button
99890 - 2½” x 5/8” stainless nipples (for 2000/3000 milk hose) ~ CUSTOM SIZES AVAILABLE ~
99712 - 2 AMP fuse (for 2000 and 3000 Series Boards)
99782 - Shuttle valve (for 2100)
99726 - 1/4” O.D x 1/8” I.D. air tubing....specify color (for 2100)
99782
99830 - Rubber shutoff hose .62” x 3.25” (for 2100 or 2101 clear air sensors)
99802 - Cable for Precision meter, 10’ long
99715 - O-ring for old style meter lid (style of lid with 2 ears)
99791
99791 - Bushing for 2100 hose support (uses 2)
99875 - One
Piece Plunger
assembly for
new style BM
sensor
1-800-768-6166
99885 - Plunger assembly for
new style sensor
99886 - Plunger only, for new
style sensor
99751 - Diaphragm only, for
new style sensor
99830
fax: 717-768-7586
11
COPY KITS ANd PARTS FOR BM PERFECTION METER
99851 - 6 piece ~ parts kit ONLY
INCLUdES:
99753 - White diaphragm
99840 - Large seal, (uses 2)
99842 - Red silicone seal
99844 - Plug
99847 - Small thin black o-ring
99850 - Complete service kit
INCLUdES:
99753 - White diaphragm
99840 - Large seal, (uses 2)
99842 - Red silicone seal
99844 - Plug
99847 - Small thin black o-ring
99852 - Stainless plate
99856 - Stainless insert
99858 - Stainless spring
99861 - Plastic threaded nut
99863 - Stainless bolt
99865 - Diaphragm assembly
99753
- White
diaphragm
99865 Diaphragm
assembly
NEW ITEM
99575 - Keypad for BM
99695 - Replacement
metering takeoff
Touch Switch
99756 - Diaphragm
99675 - Piston seal
for 2000V shutoff
for 2000/3000 and
4200/4400 series
cylinder
12
1-800-768-6166
99720 - Grey nylon filter/
muffler for 2000/3000 series
speed control head
99780
- Solenoid valve for
Perfection meter
99719 - Metal
filter/muffler for
2000/3000
series solenoid
fax: 717-768-7586
99475
- U shaped shutoff hose for
Companion
99460 - 3.125 piston seal for
Companion or 4000D takeoff
99420 Companion
flex switch
99425 Handle with
flex switch
99455 - Molded shutoff diaphragm
99423 - Handle, ONLY
for Companion or 4000D takeoff
NOT SHOWN
TERMINALS FOR BM CIRCUIT BOARdS
NEW ITEMS
92418 - 6 pin terminal
24
volt
DC
24
volt
DC
99775
99779 - 3 way Solenoid
- Solenoid for 2100 or 2101
for 2000V and 2000VM
1-800-768-6166
24
volt
DC
99777 - 4 way
Solenoid for 3000 series
fax: 717-768-7586
13
REPLACEMENT SENSOR ASSEMBLIES FOR TAKEOFFS
99881 - Kleen Flo Vacuum
99882 - Kleen Flo Air
Sensor Assembly, ¾”
Sensor Assembly, ¾”
99880 - Kleen Flo
Sensor Body ONLY
REPLACEMENT BRACKETS ANd MOUNTINg HARdWARE
10060 - Stainless bottom bracket with chain bushings
10070 - Stainless chain shield
99742 - Stainless top mounting bracket for 2100
99729 - Stainless retaining ring (for white chain bushing)
99807 - White chain bushing (for bottom bracket)
99749 - Stainless U-bolt (for #99740 and #10060 bracket)
99817 - Stainless mounting bracket with 2 clamps
10060
10070
(for new style BM curb mount sensor)
99817-1 - Side clip for 99817 bracket
99819 - Stainless bracket for 2100 sensor
91767 - Stainless curb mount hose support bracket
99746 - Stainless hose clamp (for #99740 bracket)
99740 - Stainless mounting bracket (for the 2000, 2101, 3000, 4200, 4400, 4600)
99825 - Stainless wall mounting bracket (for Perfection 3000 meter)
99340 - Handle bracket (for Companion)
99462 - Washer plate (for Companion)
99825
99817
91767
99740
14
1-800-768-6166
fax: 717-768-7586
REPLACEMENT SHUTOFF ASSEMBLIES FOR TAKEOFFS
 Available with air or vacuum operated top
 Plastic breakaway kit included
 Mounting brackets not included
99150
99160
99146 - Plastic body only for 99160
99150 - 3/4” plastic vacuum operated shutoff assembly, mounting bracket not included
99160 - 3/4” plastic air operated shutoff assembly, mounting bracket not included
99180 - Breakaway clamp kit
99148
99185 - Silicone gasket
99177 - Breakaway spring clamp
99175 - Breakaway clamp half only, 2 needed
99148 - Vacuum top assembly, with nut
99172 - 5/8” stainless curb mount bracket
99173 - 3/4” stainless curb mount bracket
91810 - 3” stainless milk line clamp
91811 - Gasket for 3” stainless milk line clamp
99885 - Plunger assembly
99886 - Plunger, only
99875 - NEW One Piece Plunger assembly
99889 - Blue nut
99155
99180
PARTS FOR AIR ASSEMBLY ONLY
99155 - Top assembly, with nut
99162 - Shut off top, only
99163 - Insert for top
99164 - Snap ring for top
99165 - Flat washer for top
99166 - Screw for top
99167 - Spring for top
99168 - O-ring for top
99169 - U-cup for top
99170 - Sealing washer
99889
99173
91810
1-800-768-6166
fax: 717-768-7586
15
REBUILT dELAvAL® - ALL vACUUM
MILK MASTER
PORTABLE
SST#2
 Float style 5/8” sensor
 Variable Pulsation
 12 volt AC operation
 End of milk indicator
 Milk Metering
 With Dellatron 200B
 End of Milk Indicator
pulsator
 Available in 60/40, 65/35,
or 70/30 pulsation
 Rotary style Detaching
 Optional Multi Grip
Connector
plEasE spECifY Ratio
nEEDED upon oRDERing
115390
115150
PORTABLE
vACTROL
PARLOR
vACTROL
 Economical unit
 Economical unit
 No Electricity is required
 No Electricity is required
 Optional Vacuum or
electronic pulsator
available upon request
115240
16
1-800-768-6166
115210
fax: 717-768-7586
REBUILT dELAvAL® - ALL vACUUM
ALPRO
 VAC/ATM bayonett control valve
WITH
FLO MASTER
PRO METER
 Network compatible with AlPro
Processor
 On board pulsation controller
 Optional ATM/ATM or VAC/VAC
control valve.
115420
 Stainless steel cylinder
PARLOR SST#2
and box
and box
 End of milk indicator
Float
Sensor
 Vertical sensor inlet
 Comes with a NEW copy
silicone keypad and
adaptor board for the
following circuit boards:
5.2, 5.3, or 6.1
 Bayonett mount control
valve
HFC
Sensor


 Line mount control valve
 Comes with a NEW
copy silicone keypad
and version 2038
button board
 Optional Part Available:
Plastic cylinder
(please specify which version
needed upon ordering)
 Optional Parts Available:
• Plastic cylinder
115000
• Horizontal sensor inlet
115035
Also Available:
115030 - Same Unit but with
Bayonett control valve
1-800-768-6166
fax: 717-768-7586
17
dELAvAL® MISC. USEd PARTS
115930 - Used 5.2
version SST#2 board
115960 - Used 4.2 version board
for plastic SST #2
115915 - Used 5.3
version SST#2 board
ALL
BOARdS ARE TESTEd
ANd WORKINg BEFORE
SENdINg ANd COME WITH A
90 dAY WARRANTY
115900 - Used 6.1
version SST#2 board
115897 - Used 2038 version board for
SST#2, MP370 or MP 380
115780 - Rebuilt
galvanized ARM
linkages, w/stainless
bars
PLEASE SPECIFY RIgHT
116020
- Rebuilt
plastic
cylinder
HANd OR LEFT HANd STYLE
UPON ORdERINg.
PICTURES SHOWN ARE
RIgHT HANd.
115810 - Rebuilt
stainless ARM linkages
with galvanized base
115570 - Used line
mount SST#2 control
valve-rebuilt
18
1-800-768-6166
115510 - Used SST#2
Deluxe or Plato keypad
115720 - Used
FloMaster 2000 load
cell with board
fax: 717-768-7586
DeLaval® Used Parts
TAKEOFFS FOR DELAVAL®
~ SST #2 Takeoffs
115000 - Rebuilt all stainless SST#2, float sensor, with line mount valve
115030 - Rebuilt all stainless SST#2, float sensor, with bayonnet valve
115035 - Rebuilt all stainless SST#2, bayonnet valve, used HFC 16mm sensor
115036 - Rebuilt all stainless SST#2, bayonnet valve, used HFC 19mm sensor
115045 - Rebuilt all stainless SST#2, bayonnet valve, NEW HFC 16mm sensor
115046 - Rebuilt all stainless SST#2, bayonnet valve, NEW HFC 19mm sensor
115060 - Rebuilt SST#2 Deluxe, with Flomaster 2000 meter
115089 - Rebuilt SST#2 S/S box - plastic cylinder, float sensor, bayonett valve
115090 - Rebuilt SST#2 S/S box - plastic cylinder, float sensor, line mount valve
115120 - Rebuilt all plastic SST#2, float sensor, line mount valve
~ Portable Stallbarn Takeoffs
115390 - Rebuilt Milkmaster
115150 - Rebuilt portable SST#2, with Dellatron pulsator
115240 - Rebuilt portable Vac-trol, without pulsator
115300 - Rebuilt portable Autocord
~ Miscellaneous Takeoffs
115420 - Rebuilt Alpro, with FloMaster Pro meter
115180 - Rebuilt Plato, with float sensor and s/s arm
115210 - Rebuilt Parlor Vac-trol
115270 - Rebuilt Parlor Autocord
115330 - Rebuilt ARM I, with galvanized arm
115360 - Rebuilt ARM II, with galvanized arm
TAKEOFF PARTS FOR DELAVAL®
~ SST#2 Takeoff Parts
115480 - Used keypad for stainless SST#2
115510 - Used SST#2 Deluxe or Plato keypad
115515 - Used Plato solenoid valve
115540 - Used plastic keypad for SST#2 or ACR 5000
(IA)
115568 - Rebuilt bayonett SST#2 control valve
115570 - Rebuilt line mount SST#2 control valve
115897 - Used 2038 version board for SST#2, MP370 or MP 380
115900 - Used 6.1 version SST#2 board
116020 - Rebuilt plastic cylinder
116050 - Used 12 volt AC transformer (IA)
117388 - Used white base plate for SST#2 control valve
117390 - Used coil for SST#2 control valve
~ SST#2 Sensor Parts
115590 - Used complete vertical SST#2 sensor assembly - float style
115595 - Used complete horizontal SST#2 sensor assembly - float style
115600 - Used SST#2 jar, 5/8”
115630 - Used vertical SST#2 inlet 5/8” (IA)
115637 - Used horizontal SST#2 inlet 5/8” (IA)
115660 - Used SST#2 float
115690 - Used SST#2 black sensor jar holder
~ Milkmaster Takeoff Parts
116100 - Used Milkmaster Powerhouse
(IA)
116110 - Used 2” multi coupler
(IA)
116112 - Used 2½” multi coupler (IA)
116114 - Used 3” multi coupler
(IA)
116125 - Used Milkmaster board
(RA)
~ ARM Takeoff Parts
115780 - Rebuilt galvanized ARM linkages, w/stainless bars
115810 - Rebuilt stainless ARM linkages, w/galvanized base
115840 - Used galvanized A link
115870 - Used galvanized B link, w/new nylon bushings
115885 - Rebuilt ARM I pinch off w/new copy pinch cylinder
115990 - Used ARM I Board
115995 - Used ARM I solenoid
115997 - Used ARM II solenoid
~ Alpro and FloMaster 2000 Takeoff and Meter Parts
115450 - Used Alpro MPC 1
115453 - Used Alpro MPC 2 (IA)
115455 - Complete rebuilt Alpro meter
115458 - Used Alpro load cell, w/board
115465 - Used FloMaster 2000 or Alpro, meter lid
115467 - Used FloMaster 2000 or Alpro, meter body
115469 - Used FloMaster 2000 or Alpro, meter cup
115720 - Used FloMaster 2000 load cell, w/board
115750 - Used FloMaster 2000 meter board, pound
115755 - Used FloMaster 2000 meter board, kilo
116080 - Used old style FloMaster meter lid (style w/4 lid screws)
1-800-768-6166
Fax: 717-768-7586
19
NEW REPLACEMENT PARTS THAT FIT dELAvAL® TAKEOFFS
PARTS FOR SST#2
Standard length is 39½”
Custom Sizes Available
98721 - Stainless
cylinder for SST# 2,
with rope
98731 - Stainless
cylinder for SST# 2,
with stainless chain
98723 - Stainless
horizontal cylinder for
SST# 2,
with rope and pulley
85035 - Silicone keypad, with
stainless cover and
connector board to adapt to
SST#2® 5.2, 5.3 or 6.1 boards
98769 - Stainless box with cover for
SST#2, Deeper for HFC sensor
98771 - Stainless box with cover for
SST#2 and silicone style keypad
(as shown)
85020 - Keypad with
connector board,
91805 - Stainless L
shaped bracket for SST#2
LESS stainless cover
92241 - Cylinder
bottom for stainless
SST#2 (rope style)
85070 - Silicone keypad, only
85076 - Connector board only,
92239 - Cylinder
bottom for stainless
SST#2 (chain style)
for E-Zee keypad
85040 - Replacement keypad
kit with rebuilt circuit board
(Specify what version board needed
5.2, 5.3 or 6.1)
98738 -Clamp
for 2” stainless
cylinder with ½”
thread
98741
92473 - Cylinder
bottom w/pulley assembly for stainless SST#2
(for chain or rope)
- Clamp for 3”
plastic cylinder
with ½” thread
98575 - HFC sensor
board for DL
(These 3” copy
clamps can be used
on:
Plastic VSO,
Little Champ
and Plastic SST#2)
AIR CYLINdERS
98745 - Pinch cylinder for ARM I
98747 - 12” Retract cylinder for ARM I or II
98749 - 14” Retract cylinder for Plato
98751 - 16” Counter balance cylinder for Plato
98706 - Chain for ARM I or II, 88”
98707 - Chain for Plato, 63”
98795
- Bushing for
Plato arm
98754 - 12 volt DC Mac
valve for ARM II or Plato
takeoffs
20
1-800-768-6166
fax: 717-768-7586
NEW REPLACEMENT PARTS THAT FIT dELAvAL® TAKEOFFS
PARTS FOR MILKMASTER
99760
- Label
NEW
ITEM
98470 Bulb
98625 - Rubber rebuild kit for
Amplifier
NEW
ITEMS
REPLACEMENT
HANgERS FOR
MILKMASTER
TAKEOFF
98660 - Rubber
rebuild kit for sensor
PICTUREd ON PAgE 45
98653 98647
- Outer
seal for
motor
Filter,
Includes clip
98648 Inner seal
for motor
98628
- Easyline hanger
98629
- 2” hanger
98630
98655
- 3” hanger
- Ball for rope
PARTS FOR SST#2
98950 - Cover kit, for control valve
98951 - Blue cover gasket
20164
98952 - Fresh air nipple only
98953 - Fresh air screen only
98702
98954 - Blank plug (replaces screen)
98949 - Grommet, for wiring harness
98703 - Flag terminal, for SST#2 or Milkmaster
43317 - Magnetic plate, for SST#2 or Milkmaster 20165
20164 - Gasket, for inlet
20165 - Shutoff diaphragm, for inlet
98703
98695 - Sensor jar
43317
98702 - Reed switch, for SST#2 or ARM takeoffs
98695
MISCELLANEOUS REPLACEMENT PARTS
98805 - Wear plate for ARM I or II takeoff linkage
98802 - Start/Remove switch for ARM I
98810 - SRK - SQE1 exhaust repair kit for ARM I or II
98811 - SQE1 exhaust for ARM I or II
98805
98717 - Strap to mount stainless SST#2 cylinder to stainless box
98719 - Strap to mount plastic SST#2 cylinder to stainless box
98720 - Adaptor plate to mount stainless SST#2 box to plastic cylinder
98713
98713 - Bracket for HFC sensor
98710 - HFC Sensor Diaphragm
98704 - 3 strand wire harness for SST#2 control valve, 7’ long
98705 - 4 strand wire harness for SST#2 control valve, 7’ long
98790 - 3/16” Nylon rope (sold per foot)
91819 - Bulb for ARM I
NEW ITEM
98756 - Bulb for SST#2 or ARM II
98460 - MM25 gasket
98710
98460
98960 - Repair kit for Milkmaster pulsator
1-800-768-6166
fax: 717-768-7586
21
REBUILT WESTFALIA® - ALL vACUUM
METATRON 12
METATRON 12 APEX
 Solenoid valve is mounted inside control
box
 Compatible with Farm Plan software
 Can also be used as a stand alone unit
 Heavy duty stainless steel control box
 Compatible with Farm Plan software
 Can also be used as a stand alone unit
143000*
143040
w/040 circuit board
*also availaBlE:
143030 - w/030 circuit board
22
1-800-768-6166
fax: 717-768-7586
REBUILT WESTFALIA® - ALL vACUUM
ACR-SS
 Push button starter
 Stainless steel
construction
 5/8” Canister
 Touch sensitive
starter
 Stainless steel
construction
style sensor
 3/4” Visoflow sensor
143300
143270
ACR# 3
 3/4” Visoflow sensor
STIMOPULS MA PORTABLE
 On-board pulsation with
stimulation
 Solenoid valve is mounted
inside the control box
 On-board pulsation
with stimulation
 Optional Remote
attach/detach
button
 Lightweight durable
design
143210
143120
also availaBlE:
143245 - With a 5/8” canister style sensor
1-800-768-6166
fax: 717-768-7586
23
WESTFALIA® MISC. USEd PARTS
143490
- Used 040
Metatron
board
143480
- Used 030
Metatron
board
143494
- Used 050
Metatron
board
143512 - Used 070
Metatron board
143492 - Used connector
board for 020 or 030
version boards
144650
- Used
ribbon style
board for
ACR 3 or
Stimopuls
MA
143450
- Rebuilt
ACR
Sensor
24
1-800-768-6166
144280 - Used solenoid coil
for Metatron 12, ACR 3 or
Stimopuls MA
(IF AVAILABLE)
fax: 717-768-7586
Westfalia® Used Parts
TAKEOFFS FOR WESTFALIA®
~ Metatron Takeoffs
143030 - Rebuilt Metatron 12, with 030 board
143012 - Rebuilt Metatron 12, with 070 board 143040 - Rebuilt Metatron APEX
143060 - Rebuilt Metatron 12, with Arm
143095 - Add per unit for new meter body
(IA)
(IA)
(IA)
(RA)
~ ACR Style Takeoffs
143270 - Rebuilt ACR SS, with 5/8” sensor
143300 - Rebuilt ACR SS, with used Visoflow sensor
143330 - Rebuilt ACR SS, with NEW Visoflow sensor
143360 - ACR SS Style, with s/s copy box & copy # 85350 curcuit board & 5/8” sensor
143390 - ACR SS Style, with s/s copy box, copy # 85350 curcuit board & USED Visoflow sensor
143420 - ACR SS Style, with s/s copy box, copy # 85350 curcuit board & NEW Visoflow sensor
143495 - Rebuilt ACR 1, all plastic
143180 - Rebuilt ACR 2, with 5/8” sensor
143210 - Rebuilt ACR 3, with USED Visoflow sensor
143240 - Rebuilt ACR 3, with NEW Visoflow sensor
143245 - Rebuilt ACR 3, with 5/8” sensor
~ Portable Stallbarn Takeoffs
143120 - Used Stimopuls MA takeoff with ribbon style board
143125 - Used Stimopuls MA takeoff w/new style potted board
143130 - Rebuilt Dematron 50T
(RA)
TAKEOFF PARTS FOR WESTFALIA®
~ Metatron Takeoff Parts
143482 - Used 020 Metatron board, only
143492 - Used small connector board for 020 or 030 version boards
143505 - Used Metatron box cover
143510 - Rebuilt Metatron 12 solenoid
144280 - Used solenoid coil
143520 - Used Radel probe style Metatron meter body
143550 - Used probe style Metatron meter body
143554 - Used Metatron meter lid cover 143557 - Used Metatron 12 defoaming chamber
143560 - Used Metatron 12 power supply
~ACR Takeoff Parts
143450 - Rebuilt 5/8” ACR sensor, with new sight glass & diaphragm
143569 - Rebuilt ACR 2 solenoid
143575 - Rebuilt ACR 3 solenoid
143595 - Rebuilt ACR SS reversing valve
143600 - Used #7053-9047-080 ACR SS board
143650 - Used #4017-2678-000 ACR SS board
143700 - Used ACR 1 board, older style
143705 - Used ACR 2 board
143709 - Used connector board for old style ACR 3
143710 - Used 24 volt AC transformers
144650 - Used ribbon style board for ACR 3 or Stimopuls MA
144655 - Used newer style potted board for ACR 3 or Stimopuls MA
1-800-768-6166
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
Fax: 717-768-7586
25
NEW REPLACEMENT PARTS THAT FIT WESTFALIA® TAKEOFFS
{
10310 - Box with side holes, ONLY
91871 - Box with switch, button and red lens assembly, ONLY
91851 - Box COMPLETE, (with replacement board)
91808 - Mounting clamp for side switch box, copy (2 required)
STAINLESS BOXES FOR ACR#1
10480 - Box with front holes, ONLY
91870 - Box with switch, button and red lens assembly, ONLY
91850 - Box COMPLETE, (with replacement board)
91806 - Mounting clamp for front switch box, copy (1 required)
}
NEW
ITEM
91835
91838
91833 -
Replacement Touch Switch
for W/F
- Water tight toggle
switch cover
91830 Push button
91836
- Toggle
switch for
ACR
- Toggle
switch cover
91831
91922
- Push button
cover
- Wire connector for reversing valve & sensor
24 volt DC
91785
- Complete replacement solenoid valve
with stainless steel
box for ACR 1
91795
- Stainless box with
lid, ONLY
91800
- Replacement solenoid
valve less box
26
1-800-768-6166
99777 Replacement solenoid
(ONLY) for ACR #1
fax: 717-768-7586
85350 - Replacement Circuit board for
ACR1® takeoff, with board heater
85353 - Board heater ONLY
MISCELLANEOUS COPY PARTS
98790 - 3/16” Nylon rope (sold per foot - roll size is 1000 ft.)
91887 - 90° conduit elbow for ACR ss takeoff box
91816 - Stainless L bracket for old style sensor mounting
91245 - End cap for Stimopuls® MA cylinder.
91235 - Seal for Stimopuls MA cylinder
91237 - Sealing ring for Stimopuls MA
91909 - Bottom mounting plate for Metatron® Apex box
91910 - Swivel bracket for Metatron® Apex box
91991 - Tube sealing cap for Metatron® or ACR
91231 - Front cover assembly replacement for Stimopuls
91230 - Front cover, ONLY
91231
91245
91235
91237
NEW ITEM
91991
91196
91819
- Fuse for ACR board, 1.6 AMP,
5mm x 20mm
1-800-768-6166
- Bulb for Metatron® 12,
ACR 2 & 3® or Stimopuls® MA
91199
- Bulb for
ACR 1 board
fax: 717-768-7586
27
91860 99747 Leather sleeve
for cylinder
91820 Bottom for
cylinder
Complete
stainless cylinder,
37” long
91863 Top disc
for piston
91865 - Piston
91862 - Top cap
for cylinder
for cylinder
91867 - Piston spring
99172- 5/8” stainless
curb mount bracket
99173 - 3/4” stainless
curb mount bracket
91805 Stainless L
shaped cylinder
bracket
99180 - Breakaway clamp kit
99185 - Silicone line gasket
99177 - Spring clamp
99175 - Clamp half, only
91807 - Mounting
bracket for Metatron box
28
1-800-768-6166
fax: 717-768-7586
91980 - Service kit for Metatron® meter
Includes:
1 - 99252 - lid gasket
1 - 99185 - silicone line gasket
3 - 91991 - sealing caps
2 - 99751 - diaphragms
1 - 91970 - plunger assembly with diaphragm
91945
- Plunger
assembly for
Visoflow
sensor
91946
- Plunger only
for Visoflow
sensor
91970 - Plunger
99751 - Sensor or meter
diaphragm
NEW ITEM
assembly for
Metatron® meter
91971 - Plunger
only for Metatron®
meter
91810 - 3” stainless milk line clamp for
Visoflow® or Metatron®, (Includes gasket)
91811 - Gasket for 3” stainless milk line
clamp
1-800-768-6166
91239 - Replacement hanger for
Stimopuls MA
for 2” line
fax: 717-768-7586
29
REBUILT SURgE® - ALL vACUUM
ONE TOUCH
all suRgE onE touCH paRts aRE suBJECt to availaBlilitY
PORTABLE
UNIT
 Lightweight Plastic
Design
 Milk Yield Indicator
 In Unit Alternating
Pulsator
133170
MILK INLETS
Picture as shown
with a One Touch Unit
attached to a Milk Inlet
133175
133185
- with
milk yield
indicator
- without
milk yield
indicator
PORTABLE
BATTERY
UNIT
 Lightweight plastic design
133800 - 2”
 Rechargeable Battery
operation
133806 - 2½”
133803 - 3”
 Economical unit
 Metering for a smaller
operation
 No electricity required
133060
30
1-800-768-6166
fax: 717-768-7586
REBUILT SURgE® - ALL vACUUM
SURgE METER
VSO
 Stand alone meter
 Can be used with
or without
takeoffs
 Interchanges with
 Stainless cylinder
detaching
 Economical unit
 No electricity
required
most parlor
style takeoffs
133480
133120
Also available with a
plastic cylinder
133150
OMNI
OMNI
detaching
detaching
 5/8” Optic sensor
 ¾” Visoflow sensor
 Touch pad controls
 Touch pad controls
 Plastic control box
 Plastic control box
 24 volt DC operation
133000
OPTIONAL BOARDS
3.2, 3.3 or 4.06 board
133015
Please specify upon ordering
1-800-768-6166
fax: 717-768-7586
31
SURgE® MISC. USEd PARTS
133225 - Used Omni 3.2 board
133210 - Used Omni Green
4.06 board
133230
- Used Surge
Omni keypad
133295 - Rebuilt
Omni solenoid assembly
133277
133273 - Used Optic sensor body
(IF AVAILABLE)
32
1-800-768-6166
- Rebuilt air
shutoff for
Optic sensor
133510 - Used
Surge meter head
(with new bellows)
fax: 717-768-7586
Surge® Used Parts
TAKEOFFS FOR SURGE®
133000 - Rebuilt Omni vacuum, with Optic sensor
133015 - Rebuilt Omni vacuum, with Visoflow sensor
133030 - Rebuilt Omni Elite air
133060 - Rebuilt portable battery
133090 - Rebuilt Optic 500, with Optic sensor
133120 - Rebuilt VSO, with stainless cylinder
133150 - Rebuilt VSO, with plastic cylinder
133175 - Rebuilt One Touch, with milk yield, no takeoff
133185 - Rebuilt One Touch, without milk yield, no takeoff
133170 - Rebuilt One Touch, with milk yield and takeoff
(IA)
(IA)
(IA)
TAKEOFF PARTS FOR SURGE ®
~Omni Takeoff Parts
133210 - Used Omni 4.06 board, green version
133215 - Used Omni 4.06 board, black version for Visoflow
133230 - Used Omni keypad
133240 - Used complete Optic vacuum sensor
133270 - Used complete Optic air sensor
133273 - Used Optic sensor body only
133277 - Rebuilt air shutoff for Optic sensor
133295 - Rebuilt Omni solenoid assembly
133300 - Rebuilt Omni cylinder
133310 - Used Omni power supply
133330 - Used Optic 500 board
133360 - Used Optic 500 power supply
133375 - Used Optic 500 solenoid assembly
~VSO Takeoff Parts
133390 - Rebuilt stainless VSO cylinder
133420 - Rebuilt plastic VSO cylinder
133425 - Used VSO sensor base
133427 - Used VSO sensor float
133440 - Used VSO sensor assembly
(IA)
(IA)
(IA)
(IA)
(IA)
(IA)
~One Touch
133800 - 2” milk inlet
133806 - 2½” milk inlet
133803 - 3” milk inlet
METERS FOR SURGE®
133480 - Used complete electronic meter
133510 - Used meter head only
133518 - Used glass for meter
133540 - Used butterfat sampler for meter #47213
133570 - Used yellow power cord for meter
133630 - Used power supply for meter
133660 - Used feed identifcation module
133720 - Used meter control module
133750 - Used multi function module
1-800-768-6166
(IA)
Fax: 717-768-7586
33
NEW REPLACEMENT PARTS FOR SURgE® TAKEOFFS
vSO PARTS
99733 Plunger for
VSO float
99736 Radel VSO
top, with
brass
inserts
99730
- cap & stem
for VSO float
99738 Radel base for
VSO
64512 - Screws (Pkg. of 12)
99732 - Large O-ring for mounting bracket
99731 - Rubber rebuild kit......
99737 - Small O-rings for top (Pkg. of 10)
Includes:
99739 - White teflon washer
99737 - Small O-ring
99732 - Large O-ring
64589 - Replacement gasket
64589 - Gasket
64610 - Insert nuts (Pkg. of 12)
99739 - Teflon washer
05251 - VSO sensor float (7750-0021-568 WF/S)
MISCELLANEOUS REPLACEMENT PARTS
92243 - Bushing only for plastic VSO® cylinder bottom
98789 - 1/4” Nylon rope (sold per foot)
92183 - Push button cover for meter reset switch
92107 - Stainless hose clamp for One Touch milk valve
92209 - Mac valve solenoid, for Optic® 850 takeoff - 12 VDC
92232 - Chain stop
92232
92241 -
92242 -
Cylinder
bottom
for Omni®
vacuum
and
stainless
VSO®
Cylinder
bottom
with
bushings
for plastic
VSO®
92264 - Stainless
L shaped bracket
for plastic VSO®
cylinder
34
1-800-768-6166
92209
92282
- Piston
seal for
Omni® and
stainless
VSO®
cylinder
91805 - Stainless
L shaped bracket for
Omni® and stainless VSO®
cylinders
fax: 717-768-7586
NEW REPLACEMENT PARTS FOR SURgE® TAKEOFFS
PARTS FOR OMNI ELITE
92205 - Air cylinder
92210 - Mac valve
92227 - Air
electric switch
solenoid - 24 VDC
92222 - Manual/Auto switch
92221 - Milk valve button
92220 - Detach valve button
MISCELLANEOUS OMNI® REPLACEMENT PARTS
92000 - Bushing kit for Surge Omni Elite arm
92010 - Bushing and ring for Surge Omni Elite arm
92230 - Chain pad for Omni Elite®
92260 - Stainless chain for Omni Elite®, 60”
92252 - Bulb for Omni Power supply
92287 - 10 - 32” nylon screw for Omni® solenoid cover
92294 - Small cord grip for Omni® box
92208 - Mac valve solenoid for
®
Omni air takeoff - 24 VDC
92325 - Replacement keypad
43105 - Rebuild kit for
Omni® vacuum solenoid
92275
- Rebuild
kit for Optic
sensor
1-800-768-6166
cover for Omni®
92245
- Stainless
sensor holder
for Optic
sensor
fax: 717-768-7586
35
SENSOR INTERFACE
BOARd
FOR OMNI® TAKEOFF
 Adapts Visoflow style sensor to older
Omni® boards
 Sensing range (30-ohms to 5030-ohms)
NUPULSE® TAKEOFF
FLOCHEK
PARLOR
TAKEOFF/METER
 Meter has 3/4” inlet
 Keep your existing Omni takeoffs
®
and outlet
and upgrade them to a new sensor
at an affordable cost
 Flow through
(as seen in the picture below)
electronic meter with
no moving parts
 This board adapts to most ring style sensors
 420 Line mount
92279 - Complete sensor Interface
solenoid valve
assembly with board, box & bracket
 Inline shutoff
 This meter can be
interfaced with existing
takeoffs
M15700NP
92280 - Sensor Interface board, ONLY
for Omni® takeoff
36
1-800-768-6166
The FloChek
parlor milk meter
provides a digital
readout along with
an End-of-milk
signal. The meter
can be calibrated
and shows the
accumlated milk
weight. The meter
also has a milking
total selection key,
and can show the
flow rate per
minute. Weight
can be shown in
either kilograms or
pounds.
18500NP - Constant voltage
transformer. This CVT can handles
up to 10 units at a time.
fax: 717-768-7586
REBUILT WAIKATO® - ALL vACUUM
PORTABLE
PARLOR
 Economical Unit
 Economical Unit
 Light weight
 No Electricity Required
plastic design
 Float style sensor
 No Electricity
Required
 Float style sensor
197000
197020
WAIKATO® TAKEOFF PARTS
94200 - Sensor body
94204 - Cover for valve head
94205 - Valve head
94220 - Float
94222 - Sensor Bracket for Waikato Takeoff
94221 - Bridle Clip for Waikato Sensor
94207 - Timer lever with bung
94208 - Float lever with bung
94212 - Bung only
94218 - Piston washer
94216 - Bayonett with pulley for cylinder
99708 - Cylinder seal
94225 - Reset timer
94235 - Milk Line filter
94237 - Screen for milk line filter
94240 - Complete sensor assembly
94241 - Waikato takeoff Cylinder , complete
94250 - Complete parlor takeoff with sensor
1-800-768-6166
94204
94205
94220
94200
94221
94221
99708
94222
98790
99708
fax: 717-768-7586
37
REBUILT UNIvERSAL® - STALLBARN
PORTABLE
ECO LITE
PORTABLE
ATO
 Plastic vacuum
 Plastic vacuum
cylinder detaching
cylinder detaching
 Milk flow indicator
 Pulsator is included
 In Unit Alternating
Pulsator
 Please specify ratio
173300
173100
PORTABLE AdvISOR
 Plastic vacuum cylinder detaching
 On board pulsation
173025
 Displays milk yield
 Elapsed time
suBJECt to
availaBlilitY
38
1-800-768-6166
fax: 717-768-7586
REBUILT UNIvERSAL® - ALL vACUUM
RETRAC
RETRAC PLUS
 Plastic cylinder
 5/8” elbow type
 5/8” elbow type
sensor
sensor
 “Disable” feature
Optional:
Plastic cylinder
Optional:
Stainless steel cylinder
173150
PARLOR ECO
173200
PARLOR AdvISOR
WITH MILK METERINg
 Plastic cylinder
 Economical unit
 Economical milk
metering unit
 On board pulsation
 Displays milk yield,
elapsed time
 “Disable feature”
173050
173125
Optional:
Stainless steel cylinder
1-800-768-6166
Optional:
Plastic cylinder
fax: 717-768-7586
39
UNIvERSAL® MISC. USEd PARTS
173345 - Used
Retrac board
173400 - Used ATO board
173350
- Used Retrac
Plus board
173500
- Used white
sensor for
ATO, Retrac
and Retrac
Plus
173650 - Used parlor
Advisor sensor
173600 - Used Parlor ECO sensor
(Please specify right hand or left hand upon
ordering)
40
1-800-768-6166
fax: 717-768-7586
U
NIvERSAL® USEd PARTS
TAKEOFFS FOR UNIVERSAL
®
173125 - Rebuilt parlor Advisor
173025 - Rebuilt portable Advisor
173050 - Rebuilt parlor ECO
173100 - Rebuilt portable ECO lite
173150 - Rebuilt Retrac
173200 - Rebuilt Retrac Plus
173250 - Rebuilt parlor ATO
173300 - Rebuilt portable ATO
(RA)
(IA)
TAKEOFF PARTS FOR UNIVERSAL®
173315 - Rebuilt stainless cylinder
173325 - Rebuilt plastic cylinder
173345 - Used Retrac board
173350 - Used Retrac plus board
173360 - Used Retrac solenoid
173400 - Used ATO board
173450 - Used complete ATO solenoid
173500 - Used white sensor for ATO, Retrac and Retrac Plus
173600 - Used parlor ECO sensor
173610 - Used parlor ECO solenoid
173650 - Used parlor Advisor sensor
173660 - Used parlor Advisor solenoid
173675 - Used portable/parlor Advisor board
173695 - Used 24 volt transformer #313574
(IA)
(IA)
(IA)
(IA)
NEW REPLACEMENT PARTS FOR UNIvERSAL®
92400 - Sensor/shutoff
diaphragm, with pin
92406 - Parlor Advisor &
Eco sensor bracket
98669
- Seal for
ECO and
Advisor
sensors
NEW ITEM
99708 - Seal for
plastic style cylinder
NEW ITEM
92402 Elbow hose
for UN
takeoff
92411 - Rope
guide for 3” stainless
cylinder
not ShoWn
1-800-768-6166
92395 - Replacment Hanger
for Portable Ecolite, Advisor
and Kleen Flo takeoffs for 2” line
92404 - Manuel/ Auto switch for PATO®
92407 - Attach/Detach switch for PATO®
fax: 717-768-7586
41
KLEEN-FLO® TAKEOFF
HEAVY-DUTY STAINLESS STEEL
DESIGNED FOR YEARS OF USE
 Built in heater to reduce condensation
 Optional Accumulative vs Standard strip time
via an “on board shunt”
Accumulative: In 10 second strip mode, accumulates total of 10
seconds of no milk flow before detaching.
Standard: In 10 second strip mode, requires 10 consecutive
seconds of no milk flow before detaching.
 Power requirements: 24VAC, 25 WATTS
We recommend our 61554 transformer (on page 46), it is ideal for
areas with “AC Brownout” when voltage may be higher or
lower than normal.
Kleen-Flo #91710 Dip Switch Style Takeoff Board Sensitivity Settings
Dip Switch #1
SW1-1
ON
ON
ON
ON
ON
OFF
OFF
OFF
Dip Switch #2
SW1-2
ON
ON
OFF
OFF
OFF
ON
ON
ON
SW2-1
OFF
ON
ON
OFF
ON
ON
OFF
ON
SW2-2
ON
ON
OFF
ON
ON
OFF
ON
ON
** Suggested Starting
Range for Different
ype Sensors
Sensitivity Range OEM Type
30 TO 500 OHMS
50 TO 550 OHMS
isiFlo
150 TO 650 OHMS
Westfalia VisiFlo
350 TO 850 OHMS
400 TO 900 OHMS
1250 TO 1750 OHMS Delaval HFC
1450 TO
O 1950 OHMS Interpuls Swirl T
Type
1500 TO 2000 OHMS
** The starting points mentioned above are are only suggested. Other
ranges may be used at the customer’s discretion. If you experience
difficulties, please contact Joe @ 800-768-6166 for assistance.
COMPLETE TAKEOFF UNITS
91725 - Complete takeoff unit, with DL style stainless cylinder and Interpuls swirl sensor
91720 - Complete takeoff unit, with DL style stainless cylinder and Kleen Flo sensor assembly
®
91737 - Complete takeoff unit, with WF style stainless cylinder and Interpuls swirl sensor
91730 - Complete takeoff unit, with WF style stainless cylinder and Kleen Flo sensor assembly
®
FOR CUSTOM PACKAGES CALL JOE @ 1-800-768-6166
42
1-800-768-6166
fax: 717-768-7586
KLEEN-FLO® TAKEOFF PARTS
REPLACEMENT INTERPULS SENSOR PARTS®
This Swirl Design Sensor/Shutoff is patented by
Interpuls®. The milk enters sensor and is swirled
around shutoff plunger to the outlet side resulting
in faster passage and less milk restriction. Sensor
accepts either 5/8” or 3/4” hose.
91750
91750 - Complete, Interpuls® sensor assembly
91763 - Sensor mounting bracket
91755 - Top cap
91756 - Nut
91757 - Sensor/shutoff diaphragm
REPLACEMENT KLEEN FLO® SENSOR PARTS®
99881 - Kleen Flo Vacuum Sensor Assembly, ¾”
99880 - Plastic sensor body, ONLY
99889 - Blue nut
99883 - Vacuum top, ONLY
99148 - Vacuum top assembly, complete
99885 - Plunger assembly
99875 - One piece plunger
99817 - Sensor mounting bracket assembly
99885
99881
99875
91785 420 solenoid
valve
91805 Stainless
cylinder
brackets
91710 - Dip switch style takeoff board
FOR CUSTOM PACKAGES CALL JOE @ 1-800-768-6166
1-800-768-6166
fax: 717-768-7586
43
99881 - Kleen Flo Vacuum SenSor aSSembly, ¾”
MISCELLANEOUS TAKEOFF PARTS
99881 - Vacuum plastic sensor assembly , 3/4”
99882 - Kleen Flo air SenSor aSSembly, ¾”
Top 2 Rings for Boumatic
OHM Range 1000-2000
Middle 2 Rings for Delaval
OHM Range 1250-1750
Bottom 2 Rings for Westfalia
OHM Range 150-650
Top 2 Rings for Boumatic
OHM Range 1000-2000
Middle 2 Rings for Delaval
OHM Range 1250-1750
99882 - Air plastic sensor assembly , 3/4”
Bottom 2 Rings for Westfalia
OHM Range 150-650
99880 - Plastic sensor body, only
dECAdE BOXES
44
99711
99722
- Single dial decade box, 0 to 1,000 OHMS
- Dual dial decade box, 0 to 11,000 OHMS
1-800-768-6166
fax: 717-768-7586
REPLACEMENT TAKEOFF HANgERS
91239
- Hanger for
Stimopuls MA
NEW
ITEMS
for 2” line
92395 - Hanger
for Portable Ecolite,
Advisor and Kleen Flo
takeoffs
98628
- Easyline hanger
for milkmaster
takeoff
for 2” line
98629
99435
- Hanger for
Companion
takeoff
- Hanger for
MilkMaster
takeoff
for 2” line
98630
- Hanger for
MilkMaster
takeoff
for 3” line
for 2” line
1-800-768-6166
fax: 717-768-7586
45
MISCELLANEOUS TAKEOFF PARTS
96012
- Standard
stainless
snap, 1/4”
96088
- Heavy
duty stainless snap,
9/32”
96087
98782
96014
- Small stainless
repair link
QUANTITY dISCOUNTS AvAILABLE
ACME® TRANSFORMERS
These 500 Watt - .500 KVA transformers come
with a breaker switch installed but are
available without if requested.
99718 - 12 volt -
- Breakaway
stainless clip
- Large stainless
repair link
96030 - Stainless chain. This is a top quality, heavy duty,
stainless steel chain as each link is welded all the way around.
This chain is sold per foot but available at any length.
KLEEN FLO TRANSFORMERS
THESE 500 WATT - .500 KVA TRANSFORMERS ARE IDEAL FOR
AC “BROWNOUT” AREAS WHERE VOLTAGE MAY BE LOWER OR
HIGHER THAN NORMAL. MULTIPLE PRIMARY TAPS ACCEPT 95VAC,
105VAC, 115VAC OR 125VAC. CAN ALSO BE USED IN CASES
WHERE THERE IS A GREATER THAN NORMAL SECONDARY WIRE
LENGTH BETWEEN TRANSFORMER AND APPLICATION.
30 AMP Breaker
AC or DC
99716 - 24 volt 20 AMP breaker
AC or DC
On/Off toggle switch
PARTS FOR
TRANSFORMERS
99717 - Toggle
switch for 24 volt
transformer, (on/off)
92592 - 20 AMP
breaker switch
92590 - 30 AMP
breaker switch
TERMINALS
FOR
CIRCUIT BOARdS
61554 - 24-28 VAC Output
(One of these supplies enough power for up to 20 Kleen Flo takeoff units)
61594 - 24-28 VDC Output
(This transformer is suited for the #92280 Sensor Interface board)
vACUUM OPERATEd MILK LINE SHUTOFF
78490 - Normally Closed ~ Vacuum operated milk line shutoff.
Can be used with 5/8” or 3/4” milk hose
To convert to normally closed on the
Boumatic® 3000 series takeoffs, take
the plug out of the solenoid and replace
it with #78491 solenoid adaptor nipple
and order whatever length of #78492
hose that you will need.
78491 - Solenoid adaptor nipple
78492 - 3/16” x 12” Hose
78493 - Cover
99751 - Replacement clear diaphragm for shutoff
46
1-800-768-6166
78475 - Vacuum operated
stainless steel pinch valve
78476 - Diaphragm only
for pinch valve
fax: 717-768-7586
REPLACEMENT TAKEOFF LABELS
91824
- Label for
Stimopuls®
MA
91828
- Label for
ACR® #3
91826 - Label for
Metatron® #12
plastic style cover
99625
99646
- Label for
3000D
-Label for
3000M and
2101M
99812
- Label
for
2000V
91822
- Label for ACR SS
99643
- Label for
2101D
99811
91821
- Label for ACR SS
- Label
for
2100D
99640
- Label
for
2000VM
99760
91745
- Label for
MilkMaster
- Label for
Kleen-Flo®
92375
99640
- Label
for
4600 D
- Label for
Advisor
1-800-768-6166
fax: 717-768-7586
47
ORDER FORM
After completing this order form please Fax or Email.
An order confimation will be sent if you provide us with a return fax number or email address.
Fax: 717-768-7586
E-Mail: [email protected]
P.O. Number___________________ Date_______________________
Company Name:_______________________________
Address:_____________________________________
City:________________________________________
State/Province:___________ZIP/Postal Code:_______
Contact Person________________________________
Phone___________________Fax:_________________
Email:_______________________________________
Ship Via:_____________________________________
(Check here if shipping is same as billing  )
Ship To:_____________________________________
Address:_____________________________________
City:________________________________________
State/Province____________ZIP/Postal Code_______
Phone___________________Fax:________________
Orders under $35.00 are subject to a $5.00 handling charge
quantitY
paRt nuMBER
DEsCRiption
NOTE: Shipping charges will be applied when order is processed.
pRiCE
total
oRDER total
MilkinG eQuiPMent llc
~ TAKEOFF DIVISION ~
48
1-800-768-6166
3910 East Newport Road * Gordonville, PA 17529
Toll Free: 1-800-768-6166 * Phone 717-768-0157 * Fax 717-768-7586
E-Mail: [email protected]
fax: 717-768-7586

TAKEOFF CATALOg

Transcription

Similar documents

Milchwelt 07/2016 als pdf herunterladen

Sutorbilt Vacuum Pumps