Sutorbilt Vacuum Pumps

“Customer Service is Our Goal”
E-Zee Milking Equipment, LLC
Pump Division
Toll free: 1-888-304-6276
Email: [email protected]
Distributor for:
DSL Sutorbilt
Lobe Vacuum Pumps
P Oil Splash Lubrication on Both Ends
P New and Improved Design
P Interchangeable with the Original Sutorbilt Models
Stand Foot Print Size
21” x 28”
Stand Foot Print Size
20” x 40”
Complete Units Include:
Pump, Stand, Silencer and Drive Kit
Pump Packages are shipped fully assembled.
Horizontal Stands - Complete Unit Less Motor
65410 - 4-H, with 5 HP drive kit 65420 - 4-H, with 7½ HP drive kit 65431 - 4-M, with 7½ HP drive kit 65430 - 4-M, with 7½ HP drive kit 65440 - 4-M, with 10 HP drive kit 65450 - 5-H, with 7½ HP drive kit 65452 - 5-H, with 9 HP drive kit 65456 - 5-H, with 10 HP drive kit 65472 - 5-M, with 15 HP drive kit 65474 - 5-M, with 20 HP drive kit 65490 - 6-M, with 25 HP drive kit 65491 - 6-M, with 30 HP drive kit 67115 - Horizontal Stand, ONLY
for Highline
for Highline
for Lowline
for Highline
for Lowline
for Highline
for Highline
for Lowline
for Lowline
for Lowline
for Lowline
Stand Foot Print Size
20” x 40”
for Lowline
Vertical Stands - Complete Unit Less Motor
65412 - 4-H, with 5 HP drive kit 65421 - 4-H, with 7½ HP drive kit 65433 - 4-M, with 7½ HP drive kit 65432 - 4-M, with 7½ HP drive kit 65441 - 4-M, with 10 HP drive kit 65451 - 5-H, with 7½ HP drive kit 65453 - 5-H, with 9 HP drive kit 65457 - 5-H, with 10 HP drive kit 65473 - 5-M, with 15 HP drive kit 65475 - 5-M, with 20 HP drive kit 67120 - Vertical Stand, ONLY
for Highline
for Highline
for Lowline
for Highline
for Lowline
for Highline
for Highline
for Lowline
for Lowline
for Lowline
Stand Foot Print Size
21” x 28”
Replacement Pump Heads
65405 - 3-M Pump Head ONLY, 2” ports
65425 - 4-H Pump Head ONLY, 1½” ports
65445 - 4-M Pump Head ONLY, 2½” ports
65465 - 5-H Pump Head ONLY, 2½” ports 65485 - 5-M Pump Head ONLY, 4” ports
65492 - 6-M Pump Head ONLY, 5” ports
2 YEAR
WARRANTY!
Performance and Sizing Chart
Model HP RPM Ports Shaft CFM/13” CFM/14” CFM/15” Pump Pulley Motor Pulley Belts
3-M 5
2550 2”
3/4”
60
53
42
46-2B = 4.95” 66-2B = 6.95” B-59
4-H
5
2175 1½”
7/8”
55
46
40
48-2B = 5.15” 60-2B = 6.35” B-62
4-M 7½ 1920 2½”
7/8”
82 73 66 58-2B = 6.15” 64-2B = 6.75” B-65
4-M 7½H/L1825 2½”
7/8”
78 70 62 58-2B = 6.15” 62-2B = 6.55” B-65
4-M 10
2400 2½”
7/8”
102 88 80 58-2B = 6.15” 80-2B = 8.35” B-67
5-H 7½ 1520 2½” 1 1/8”
82 73 65 60-2B = 6.35” 52-2B = 5.55” B-62
5-H 9 1915 2½” 1 1/8”
102 89 80 60-2B = 6.35” 66-2B = 6.95” B-65
5-H 10 1975 2½” 1 1/8”
108 95 85
60-2B = 6.35” 70-2B = 7.35” B-65
5-M 15 1875 4”
1 1/8”
156
142 132 80-3B = 8.35” 86-3B = 8.95” B-72
5-M 20 2400 4”
1 1/8”
200
190 170 80-3B = 8.35” 110-3B =11.35” B-75
6-M 25
1825 5”
1 3/8”
265
250
235
68-4B = 7.15” 70-4B = 7.35” B-67
6-M 30
2130 5”
1 3/8”
315
300
285
70-4B = 7.25” 86-4B = 8.95” B-72
NOTE: Actual CFM readings may vary depending on atmospheric conditions, altitude, temperature, etc.
Vacuum Pump Motor
~ Extra High Torque
Farm Duty Motor ~
Replacement for the Old Style Dayton Motor
• 1.15 service factor
• TEFC
• Single phase
• 1800 RPM
Part#
HP
Frame
Shaft
Full Load Amps
6718010 215-T1 3/841
671797½215-TZ
1 1/830
67178
5215-TZ
1 1/829
671775184-T1 1/824
671763184-T1 1/817
REFLEX
Variable Speed Drive Unit
• Large, illuminated digital vacuum gauge for easy viewing
• Motor soft-start brings vacuum pump up to speed gradually until vacuum level in the system reaches the set point. This eliminates over torque situations during start-up.
• Separate milking vacuum and washing vacuum to achieve better
solution circulation. Switching is done automatically through the
washer control switch.
• Built-in hour meter
• Sensing is done as close to teat end as possible which controls
vacuum level more precisely at the most important place.
29530NP - 5 29505NP - 7½
29535NP - 7½
29510NP - 10
29540NP - 10
29515NP - 15
29550NP - 15
29545NP - 15
29520NP - 20
Reflex VSD Units
HP
HP HP
HP
HP
HP
HP
HP
HP
1 phase
3 phase
1 phase
3 phase
1 phase
3 phase
3 phase
1 phase
3 phase
29555NP - 20 HP 3 phase
29560NP - 25 HP 3 phase
29525NP - 25 HP 3 phase
29528NP - 30 HP 3 phase
29575NP - 30 HP 3 phase
29529NP - 40 HP 3 phase
29550NP - 40 HP 3 phase
29495NP - Reflex controller only
P29040NP - Reflex circuit board
220 volt
220 volt
220 volt
220 volt
220 volt
220 volt
440 volt
220 volt
220 volt
440 volt
440 volt
220 volt
220 volt
440 volt
220 volt
440 volt
Vacuum Pump Motor
Premium Efficiency 3 Phase Motors
• Inverter duty • 1800 RPM • 208-230/460 • TEFC enclosure
• Ideal for Electric Company Rebate Programs • 1.15 Service Factor
• Metal clad V-type sealing ring on drive-end
• SKF bearings with SKF extreme pressure high temperature grease
All motors have passed and received all U.S.
certification requirements and meet or exceed
the NEMA Premium Efficiency Standards.
Part#
HP
67160
5
67161
7½
67162 10
67163 15
67164 20
67165 25
67166 30
Frame
Shaft
184-T
213-T
215-T
254-T
256-T
284-T
286-T
1 1/8
1 3/8
1 3/8
1 5/8
1 5/8
1 7/8
1 7/8