Compost Turner

Living and
working with
Nature
Achieve High-Quality Compost with
Gujer Compost Turning Machines
TG 301
Hydraulic or mechanic drive, for
tractors over 70 hp
Compost Turner
TG 301
Our completely redesigned compost turners are lightweight and compact with an
independent hydraulic drumdrive. Various models are available: tractor-pulled,
bucket loader-driven or self-propelled units.
The technology
Easy to operate, mechanically propelled model (TG 301 mechanical)
Hydraulically propelled models (TG 301 und TG 201)
Fully hydrostatic model SGF 3100 (SF 3400 and 4000 in separate brochure)
Built with heavy duty components such as:
Saurer Danfoss
Perkins engines etc.
The core of each
compost turner is
the heavy duty
and state-of-the-art
drum.
Why turn compost?
Our turners, your advantage:
Low maintenance cost because of our high quality manufacturing
sturdy construction and optimized design! Contact us and we will be pleased to explain the advantages to you.
easy operation and handling
gentle drum action preserves the crumb structure
No odor! Our equipment, in combination with the proper composting method ensures optimized
material condition, thus guaranteeing an aerobic composting process, which produes no
offensive odors.
Minimized wear on (gravel) roads due to our side-swivel counterweight (TG 301)
Many options for customization
Optimal control of windrow position through lateral shifting appliance;
your windrow always stays where it should (option)
Krümelstruktur 1 : 50
The oxygen content of compost windrow must be observed on a daily basis. The Lübke-Hildebrandt composting
method uses a substitution test via CO²-monitoring. If
the CO² content of a windrow rises above 12%, the oxygen level drops under 5%. An aerobic rotting process requires at least 5% oxygen. Therefore the windrow must
be turned as soons as the CO²-content rises above 12%.
Even during long term storage of mature compost, the
CO²-production of the final product must not exceed 1%.
Temperature and CO2 in the compost windrow
TG 301
Lightweight, compact compost turner
For tractors with overal width until 2.35m
Solid, agile compost turner with an optimal
weight distribution.
Capacity up to 700 m³ /h.
For the standard model 2 double valves
are required on the tractor. (1 without and 1 with flating position)
•
PTO without shear bolt
PTO with a clutch
•
Axle with hydraulic brake, (Swiss) 30 km/h •
Tires 19.00-45/17 AW
•
Lighting system according to
traffic regulations •
Support wheel, mechanical swivelling
for transport (reduces transport height) •
The working pressure from the tractor
must achieve min. 190-200 bar
•
hydraulic
Basic equipment
mechanic
Ideal for road-side composting, small composting facilities and organic farms.
Fleece underpassing with rollers
•
•
Swivelled back
Working position
For transportation, the supporting wheel can be
swivelled backward, no dismantling required.
•
•
•
•
•
The Top-Tex cover is gathered over the middle of the
tunnel allowing for CO² to escape from the windrow. No
more exhausting manual handling of wet Top-Tex covers.
Capacity up to
700 m³/h
Required tractor
70 - 120 PS
Tunnel width
3,0 m
Tunnel height 1,6 m
Hydraulic pressure
320 Bar
working speed at full throttle 300-400 m/h
Weight with wide base tires 3650 kg
(incl. rotatable counterweight)
Total width
2 m
(transport position) Total height
3,8 m
(support wheel swivelled backward) 3.80 m
Technical Data
Tractor-pulled
compost turner
model TG 301
(windrow size
3,0 x 1,5 m)
3.83 m
TG 301 mechanical
nur Obenanhängung
Mechanical drumdrive - the low-cost option
The direct mechanical drive provides optimal transmission of forces. The clutch PTO
prevents impacts on the drive. This efficient drive is a cost-effective alternative to
hydraulic drive.
TG 301 hydraulic
nur Untenanhängung
Hydraulic drumdrive – Advancement through Technology
No overload safety device required
No impact on the towing vehicle or the turner
Fine tuned start up and continuously adjustable acceleration thanks to the hydraulic drum drive
Optimal rpm regulation through the variable delivery pump
The engine rpm‘s of the tractor can be
maintained in an optimal range (approx.
700 turns/min.), resulting in low fuel consumption, while the drum rpm‘s can still be
adjusted individually
The reversible drum eliminates the need
for manual work to clean up windrow ends
Low total weight 3650 kg
Maximal mobility because of an optimized
drawbar
Easy refitting of irrigation systems, fleece
underapssing, drawbar, hydr. shield, lateral
shifting and/or pusher axle
Excellent price-performance ratio
Compl. irrigationsystem incl. 1‘000lt tank
Control desk mechanical version 2 valves
with control board Potentiometer for an optimized turning pace
Pusher axle with continuously
adjustable drive and AS tires
Height adjustment via hydraulic drawbar
40 km/h model (option Switzerland)
Lateral shifting
Hydr. grooming shield (right side)
Hydraulically retractable counterweight;
reduces the weight on the inner wheel by
approx. 250kg, causing less wear on (gravel)
roads.
Double water tank
Hydr. grooming shield
(right side)
Lateral shifting
Watering manifold
tow coupling at rear
hydr.
Options
mech.
TG 301
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
Your
Dealer
Consulting:
Daniel Büchi
tractor-pulled machines mech. and hydr.
Marcel Stähli
SGF 3100 self-propelled
Sales:
René Gujer
TG, general
Administration:
Sandra Wuethrich
Gujer Innotec AG
Horbenerstrasse 7
CH-8308 Mesikon
Tel. + 41 52 346 21 94
Fax + 41 52 346 21 93
[email protected]
www.gujerinnotec.ch
Technical details can be subject to change, Pictures do not necessarily display the basic
model.
Version 20131231