led recessed soffit light specification sheet

led recessed soffit light specification sheet

BetaLED® Recessed Soffit Luminaires – Non-IC Rated
SFT-227-3M-RM-09
BetaLED Catalog #: SFT - 227 -
- RM - 09 - D -
-
-
-
Reset
1.7"
[ 42mm ]
Ceiling
Cutout
13.6"
[ 346mm ]
9.5"
[ 241mm ]
13.2"
[ 335mm ]
Fixture
Clearance
2.2"
[ 56mm ]
Notes:
Rev. Date: 2/13/12
24"
[ 603mm ]
1.2"
[ 31mm ]
1.2"
[ 31mm ]
2.0" Max
[ 51mm ]
6.3"
[ 159mm ]
1.0" Min
[ 25mm ]
Product
Family
Optic
Mounting
SFT
227
3M1
3MB2
# of LEDs
( x 10 )
LED
Voltage
Series
09
RM3
D
12
120V
20
208V
24
240V
27
277V
34
347V
48
480V
Color
Options
WH
White
(Standard)
SV
Silver
BK
Black
BZ
Bronze
PB
Platinum
Bronze
Drive
Current
525
525mA
(Standard)
350
350mA
26.2"
[ 665mm ]
Factory-Installed Options
Please type additional options in manually on the lines provided above.
40K 4000K Color Temperature4
F Fuse5
Footnotes
1. IESNA Type III Medium distribution
2. IESNA Type III Medium distribution with backlight control
3. Recessed soffit mount for new construction
4. Color temperature per fixture; 5700K standard; minimum 70 CRI
5. When code dictates fusing use time delay fuse
6. Not available when 34 or 48 voltages are selected
LED PERFORMANCE SPECS
Initial Delivered
Initial Delivered
#
Initial Delivered B U G Lumens – Type B U G Initial Delivered B U G Lumens – Type B U G
of Lumens – Type III
III Medium w/
Lumens – Type III
III Medium w/
LEDs Medium @ 5700K
backlight control
Medium @ 4000K
backlight control
**
**
**
Rating
Rating
Rating
Rating**
@ 5700K
@ 4000K
90
8,024 (09)
2 0 2
5,936 (09)
1 0 2
90
11,234 (09)
3 0 3
8,310 (09)
1 0 2
* For recommended lumen maintenance factor data see TD-13
System
Watts
120–277V
Total
Current
@ 120V
350mA Fixture Operating at 25º C (77º F)
2 0 2
5,471 (09)
1 0 2
101
0.85
525mA (Standard) Fixture Operating at 25º C (77º F)
10,354 (09)
3 0 3
7,659 (09)
1 0 2
173
1.46
7,395 (09)
Total
Current
@ 208V
Total
Current
@ 240V
Total
Current
@ 277V
L70 Hours*
@ 25º C
(77º F)
50K Hours
Lumen
Maintenance
Factor*
@ 15º C (59º F)
0.50
0.44
0.39
> 150,000
90%
0.84
0.77
0.66
124,000
88%
** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit www.iesna.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
© 2012 Ruud Lighting Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice.
9201 Washington Ave • Racine, WI 53406-3772 • 800-236-6800 • www.BetaLED.com
Made in the U.S.A. of U.S. and imported parts.
Meets Buy American requirements within the ARRA.
SFT-227-3M-RM-09 BetaLED® Recessed Soffit Luminaires – Non-IC Rated
General Description
Testing & Compliance
High performance energy efficient LED down light, designed for use in drop ceilings
or new construction applications with 16" (406mm) to 24" (610mm) on center building
construction. Heavy gauge steel recessed mounting frame features 1-1/2" (38mm) deep
aperture throat to accommodate most standard ceiling thicknesses, and a universal
mounting brackets that accept 1/2" (13mm) EMT conduit, C-channel mounting bars or flat
bar hangers with 5" (127mm) vertical adjustment from either above or below the ceiling. An
oversized junction box is listed for eight #12 AWG feed through wires.
UL listed in the U.S. and Canada for wet locations under covered ceilings. Consult
factory for CE certified product. RoHS compliant. International Dark-Sky Association
approved.
Finish
Luminaire sides are rugged cast aluminum with high performance extruded aluminum
heat sink specifically designed for high power LED. It is factory assembled to the trim
plate and wired to the driver.
Exclusive Colorfast DeltaGuard® finish on all cast aluminum components features an
E-Coat epoxy primer with an ultra-durable white powder topcoat, providing excellent
resistance to corrosion, ultraviolet degradation and abrasion. Bronze, black, silver and
platinum bronze powder topcoats are also available. Clear anodized finish on extruded
aluminum heat sink. The finish is covered by our 10 year limited warranty.
Driver compartment is constructed of anodized extruded aluminum with stainless
steel end panels for exceptional thermal performance. Driver is factory wired to the
luminaire optical housing and features a quick connect power harness.
Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt
fog conditions as defined in ASTM Standard B 117.
Five year limited warranty on luminaire.
Patents
Electrical
U.S. and international patents granted and pending. BetaLED is a division of Ruud
Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit www.uspto.gov.
Modular design accommodates varied lighting output from high power, white, 5700K
(+/- 500K per full fixture), minimum 70 CRI, long life LED sources. Optional 4000K
(+/- 300K per full fixture) also available. 120V or 277V 50/60Hz, Class 1 LED drivers. LED
drivers have power factor >90% and THD <20% at full load. Units provided with intergral
10kV surge suppression protection is standard. Surge protection tested in accordance with
IEEE/ANSI C62.41.2.
Luminaire is thermally protected Type NON-IC in accordance with Article 410 of the NEC
and UL 1598.
Luminaire is listed for eight #12 AWG, 90C rated through branch circuit conductors.
Meets FCC Title 47 CFR Part 18, Non-Consumer EMI and RFI emission levels.
Photometrics
150º
Rev. Date: 2/13/12
Field-Installed Accessories
4772
150º
100' 80'
60'
3579
120º
120º
2386
60' 40'
20'
0'
20'
40' 60' 80' 100'
18.9
55º
12.2
40'
6.1
20'
.1 .2 .5 1 2
0'
1193
3
0m
CURB LINE
90º
90º
20'
6.1
40'
12.2
60'
30.5 24.4 18.9 12.2 6.1 0m
60º
Mounting C Channel - 30" (726mm) Long
XA-MC30
18.9
6.1 12.2 18.9 24.4 30.5
Mounting C Channel - 14" (356mm) Long
XA-MC14
Mounting C Channel - 22" (559) Long
XA-MC22
60º
30º
Candlepower Trace: Vertical plane through
horizontal angle of maximum
30º candlepower.
Candlepower trace of 6000K, 90 LED recessed
soffit luminaire with Type III Medium optic.
Luminaire with 7,544 initial delivered lumens
operating at 700mA. Scaled from ITL64365, STRLWY-3M-**-04-D-UL. All published luminaire
photometric testing performed to IESNA LM-7908 standards.
150º
5517
Isofootcandle plot of 5700K, 60 LED recessed
soffit luminaire with Type III Medium optic
mounted at 15' A.F.G. Luminaire with 11,234
initial delivered lumens operating at 525mA.
Initial FC at grade.
100' 80'
60'
120º
2758
60' 40'
20'
0'
20' 40'
55º
60' 80' 100'
18.9
12.2
40'
6.1
20'
.1 .2 .5 1 2
0'
1379
90º
Mounting Brackets
XA-MB4
150º
4137
120º
Position of vertical plane
of maximum candlepower.
90º
20'
3
0m
CURB LINE
Remote Motion Sensor Kit
Used to control a single or series of fixtures as On/Off
controller or Hi/Low controller with HL option (rated
for up to 800 watts @ 120V or 1200 watts @ 277V)
XA-OMS108-UWL
Up to 8' (2.4m) mounting height
XA-OMS120-UWL
Up to 20' (6.1m) mounting height
XA-OMS140-UWL
Up to 40' (12.2m) mounting height
6.1
40'
12.2
30.5 24.4 18.9 12.2 6.1 0m 6.1 12.2 18.9 24.4 30.5
60º
60º
30º
Candlepower Trace: Vertical plane through
horizontal angle of maximum
30º candlepower.
Candlepower trace of 6000K, 90 LED recessed
soffit luminaire with Type III Medium optic with
backlight control. Luminaire with 5,581 initial
delivered lumens operating at 700mA. Scaled
from ITL68359, STR-LWY-3MB-**-04-D-UL-700.
All published luminaire photometric testing
performed to IESNA LM-79-08 standards.
Position of vertical plane
of maximum candlepower.
Isofootcandle plot of 5700K, 60 LED recessed
soffit luminaire with Type III Medium optic with
backlight control mounted at 15' A.F.G. Luminaire
with 8,310 initial delivered lumens operating at
525mA. Initial FC at grade.
© 2012 Ruud Lighting Inc. – A Cree Company. All rights reserved. The information in this document is subject to change without notice.
9201 Washington Ave • Racine, WI 53406-3772 • 800-236-6800 • www.BetaLED.com
Made in the U.S.A. of U.S. and imported parts.
Meets Buy American requirements within the ARRA.