every family has its

E V E RY FA M I LY H A S I TS
WHEN IT COMES TO ARIENS ZERO-TURN MOWERS, THAT’S THE ALL-NEW IKON-X.
ST E P U P TO A
SUPERIOR MOWING
EXPERIENCE
The IKON-X is packed with commercial quality—a tougher, longer-lasting zero-turn, built to perform way above
its pay grade. You’ll get more quality, more comfort and pro features you won’t find on anything else in its class.
All with the same American-built quality that’s made Ariens the homeowner’s go-to for generations.
A TO U G H E R , LO N G E R- L A ST I N G Z E R O T U R N
The all-new IKON-X brings more commercial-inspired toughness to the residential lineup. Plain and simple, it’s more mower for the money.
FULLY
FABRICATED DECK
The IKON-X comes with a hard-working, commercial-quality
mower deck. It’s fully fabricated from 10-gauge steel, giving it
the durability of pro-grade equipment.
• Engineered for optimal airflow and an exceptional cut
• Wide discharge chute for even clipping distribution
• Integrated wear bars for added durability
• Commercial-style 4-point deck hanging system for superior
cut quality
ONE-PIECE
WELDED FRAME
The IKON-X gets extra strength and stability thanks to a fully
fabricated steel frame. It’s welded into a single piece for the
kind of rigidity you can’t get from a bolted, multi-section frame.
• Fabricated 3” by 1.5” frame rails
• Receiver hitch mount for bagger attachment and
tow-behind accessories
• Limited 5-year frame and deck shell warranty
A M O R E C O M F O RTA B L E C U T
We built the IKON-X as much for comfort and ease of use as for performance. That’s why you’ll get premium features that make the
IKON-X a better ride with easier operation.
DIAL-OPERATED
CUT TING HEIGHT
SELECTION
With the IKON-X, there’s no
need to fumble with pins and
levers to set your cutting height.
No bending. No straining. All it
takes is a quick turn of a dial.
• 13 cutting positions in
¼” increments
• Cutting height ranges from
1.5”–4.5”
VIBRATION
ISOLATION
A contoured rubber foot mat
and padded control arms isolate
vibration while you’re operating
the mower.
HIGH-BACK
COMFORT SEAT
Most of the time you spend with
your IKON-X happens in the seat.
So we outfitted it with a plush,
high-back seat. It’s adjustable
right from the operator location,
so you can find your perfect
sitting position. And armrests
come standard.
ARIENS IKON-X
IKON-X 42
915175
915177
Kohler 7000 Series™ Twin
Kohler 7000 Series™ Twin
MODEL NUMBER
ENGINE
IKON-X 52
®
®
HORESPOWER
22 hp
24 hp
DISPLACEMENT (CC)
725 cc
725 cc
Hydro-Gear® EZT Transaxles
Hydro-Gear® EZT Transaxles
2.8 Gallons (10.5L)
2.8 Gallons (10.5L)
7 mph/3 mph
7 mph/3 mph
Electric
Electric
DECK MATERIAL
10 ga. Steel
10 ga. Steel
DECK CONSTRUCTION
Fabricated
Fabricated
NUMBER OF SPINDLES
3
3
BLADE TIP SPEED (FPM)
17,000
17,000
Steel
Steel
1" Dia. Steel
1" Dia. Steel
1" Sealed
1" Sealed
DRIVE SYSTEM
FUEL CAPACITY GALLON (L)
GROUND SPEED (APPROX. MPH) (FWD/REV)
STARTER
DECK
SPINDLE MATERIAL
SPINDLE SHAFT
SPINDLE BEARINGS
DECK DRIVE
DECK ENGAGEMENT
DECK LIFT SYSTEM
CUTTING WIDTH
CUTTING HEIGHTS
CUTTING POSITIONS
Belt
Belt
Electric Warner®
Electric Warner®
Foot Operated, Dial Selection
Foot Operated, Dial Selection
42"
52"
1.5"-4.5"
1.5"-4.5"
13
13
WHEELS
Fixed
Fixed
11" x 4"
11" x 4"
18" x 8.5"
18" x 8.5"
Optional
Optional
Plush High Back w/Seat Springs, Lever Adjust, Arm Rests
Plush High Back w/Seat Springs, Lever Adjust, Arm Rests
Standard
Standard
605
635
LENGTH
77.5"
77.5"
WIDTH
54.2"
63.4"
HEIGHT
40.9"
40.9"
3 Year Limited Consumer
3 Year Limited Consumer
5 Year Limited
5 Year Limited
Mulching Kit, 2-Bucket Powered Bagger Kit, Poly Roller,
48" Aerator, 48" Dethatcher, 15-Gallon Sprayer, Spreader, Dump
Cart, Wheel Covers, Headlight Kit, FlexTend™ Shoulder Support
System, Seat Cover, Mower Cover
Mulching Kit, 2-Bucket Powered Bagger Kit, Poly Roller,
48” Aerator, 48” Dethatcher, 15-Gallon Sprayer, Spreader, Dump
Cart, Wheel Covers, Headlight Kit, FlexTend™ Shoulder Support
System, Seat Cover, Mower Cover
FRONT AXLE
FRONT WHEELS
REAR WHEELS
FEATURES
HEADLIGHTS
SEAT
HOUR METER
DIMENSIONS
WEIGHT (LBS)
WARRANTY
MACHINE
DECK SHELL & FRAME
ATTACHMENTS & ACCESSORIES
OPTIONAL
LEARN MORE ABOUT THE ALL-NEW IKON-X AT ARIENS.COM.
© 2015 Ariens Company. All rights reserved. ® Registered trademark and ™ trademark of Ariens Company. Briggs & Stratton®, Kohler®,
Kawasaki® and Subaru® are registered trademarks of their respective companies. The engine horsepower information is provided by the
engine manufacturer to be used for comparison purposes only. Actual operating horsepower will be less. Visit www.ariens.com for a
complete listing of engine manufacturer power rating information. Product features and specifications subject to change without notice.
Photos are a representation of the product; actual product may vary.