10.2-inches tft lcd touch creen

USER’S MANUAL
10.2-INCHES TFT LCD
TOUCH CREEN
USER’S MANUAL
VL1
VL1.1
1
INDEX
NO
CONTENT
PAGE
1
Features
3
2
Specification
4
3
Installation
4
Video Control Keys
5
Video Remote Controller Function
12~13
6
Content of OSD Function
14~15
7
Content of VGA Function
16~18
8
Replacing Batteries Of Remote Controller
19
9
Standard Package
20
Precaution
21
10
5~10
11
2
1.Features:
. Touch Screen, No need mouse for use
. LED Backlight
. Compatible Language with English, Traditional Chinese,
. Simplified Chinese, Japanese, Spanish, French, German,
Korean
. Three Video Inputs,
. Auto Reversing for Video#3
. One VGA Input
. Dual Audio inputs(L/R)
. Built in speaker
. USB Interface
. NTSC/PAL/SECAM Auto Switching
. OSD Function
. With IR Remote Controller
. DC12-24V Power Input
. Auto dimmer function
. Built-In Web Cam (Optional)
3
2.Specification
10.2-INCH TFT LCD COLOR VIDEO MONITOR
Resolution
800(V) x 3(RGB) x 480(H)
Display Size
10.2 Inch TFT LCD
Brightness
400cd/m2 (Option 800 cd/m2)
Contrast Ratio
300:1
Drive System
Active Matrix
Back Light
LED
Video Input
Composite Video Signal 1 Vpp 75Ω
Video Input System
NTSC/PAL/SECAM Auto Switching
Dot Pitch
0.0925(H) x 0.276(V)
Viewing Angle
L/R: 65 T: 45 D: 65
Power Source
DC 12V - 24V
Power Consumption
650mA/DC12V (max)
Operation Temperature
-30℃ to +85℃
Storage Temperature
-30℃ to +85℃
Monitor Dimensions
251.5(L) x176 (H) x 27.5(W) mm
4
3. Installation
Step 1: Wire Connection
1. Yellow RCA Jack: Video 1
2. Black RCA Jack: Video 2
3. Blue RCA Jack: Video 3(For Reversing Camera, when you
shift the reverse gear, the camera image will be shown on the
screen automatically)
4. White RCA Jack: Audio L1
5. Red RCA Jack: Audio R1
6. USB: Wire to PC for touching function
7. 15 Pin D-SUB: Wire to PC
8. DC Jack: Power DC12-24V
5
Step 2:
a) Install the CD Disk of the software into your PC first
b) Select the “TouchKit” function from your PC
c) Select the Interface to be USB mode
d) Select the Language what you want: English, Traditional
Chinese, Simplified Chinese, Japanese, Spanish, French,
German, Korean
e) Select the “4 PTS CAL” to correct the sensitivity touch panel
f) 4 Touch points are shown on the screen, please touch the
left point on the bottomÆright point on the bottomÆright
point on the topÆleft point on the top to correct touch
function.
6
g) Draw test: when you finish the 4 Pts Cal correction, you can
select the draw test and drawing on the screen for testing
that if your screen can feel you touch.
h) Advance: if you feel the 4 Pts Cal is not good enough for you,
you can select the advance function for 25 Pts Cal correction.
The step is the same as above.
Step 3: Web Cam Driver(for WC model only):
a) Put the CD driver of web cam into your PC
b) Install the driver of web camera accordingly.
7
***** NOTICE *****
1) Please calibrate the Touchscreen with the Touchkit-utility
after the Touchscreen drivers have been installed.
If you do not calibrate the Touchscreen, it might not work
properly and can be inaccurate. (Please Refer To The Step 2
Of the User Manual)
***** Hinweis *****
1) Bitte kalibrieren Sie den Touchscreen im
Touchkit-Programm nachdem die Touchscreen Treiber
installiert sind.
Wenn Sie den Touchscreen nicht kalibrieren, dann wird er
möglicherweise nicht richtig funktionieren und sehr
ungenau sein. (siehe auch Handbuch, Schritt 2)
8
Step 4: VESA Stand Assembly Instruction:
Rear Enclosure
Steps:
1) Screw 4 screws with the
VESA hole of rear
enclosure together.
Adjust the
screen angle
(up/down)
2) Screw this part into the
plate.(for adjust the
screen angle, L/R)
3) 3M adhesive sticker for
fix on the dashboard or
suitable place.
(Also can screw on the
wall)
9
Finished
10
4. Video Control Keys:
7
6
5
4
3
2
1
1. IR receiver: For Remote Controller Receiving.
2.POWER: power ON/OFF & Video 1,2, VGA Mode selection.
3.Dimmer: Adjust the Dimmer range(by manual), Dark, Normal,
Bright.
4.MENU: Show function mean list and select the function on
the menu.
5.
: Increase +) the rating of the function that you
selected or hot key for volume rating increase.
6.
: Decrease -) the rating of the function that you selected
or hot key for volume rating decrease.
7.Auto Dimmer Sensitive LED
11
5. VIDEO Remote Controller Function:
Remote Control 1:
POWER:
Power On or Off the LCD.
MODE SELECT: Select the screen aspect ratio to be 16:9 or zoom
1,2,3 mode
MENU: Show Function Menu List and Select the function on
the Menu.
: Decrease -) the rating of the function that you selected.
: Increase +) the rating of the function that you selected.
Video Select: Select Video 1, Video 2 or VGA mode when you
push this button
DIMMER: Dark, Normal, Bright for adjustment Brightness
12
Remote Control 2:
POWER: Power On or Off the LCD.
: MUTE
MENU: Show Function Menu List and Select the function on
the Menu.
－ : Decrease the rating of the function that you selected.
＋ : Increase the rating of the function that you selected.
S: Select the screen aspect ratio to be 16:9 or 4:3 mode.
MIR: Mirror Function
AV: Video Selection.
Select Video 1 or Video 2 & VGA Mode.
RST: Restore to the origin setting.
AUTO: Auto adjustment VGA rate.
＊(DIMMER): Dark, Normal, Bright for adjustment brightness
13
6. Content of OSD Function
OSD MENU LIST
BRIGHTNESS:
Adjust the brightness of screen.
VIDEO
BRIGHTNESS
Adjust area: 0~100
100
CONTRAST:
VIDEO
Adjust the contrast of screen.
CONTRAST
Adjust area: 0~100
100
COLOR:
VIDEO
Adjust the color of screen.
COLOR
Adjust area: 0~100
HUE:
100
VIDEO
Adjust HUE function.
HUE
Adjustment area: 0~100
H-POSITION:
Adjust Horizontal Position
V-POSITION:
Adjust Vertical Position
Adjust area: 1~100
ZOOM:
Adjust Ratio Position
Adjust Type: 16:9 /4:3
14
100
RESET:
Yes: Reset the Value
No: Don’t reset the Value
EXIT:
Exit to menu mode
OPTION: For setting more functions as below:
Volume: Adjust volume from 0-100
Mute: on/off
Dimmer: Select Auto Dimmer/Bright/Dark/Normal
CCD_Mirror: Set Mirror on/off for V3
Mirror: On/Off (For V1/V2)
Language: English, Spanish, French, German, Italian.
Default: Return all controls back to factory setting
Exit: Exit to menu mode
15
. Content of VGA Function
VGA MENU LIST
AUTO ADJUST
Yes: The Value Auto Set
No: The Value by Manual Control
BRIGHTNESS:
Adjust the brightness of screen. Adjust area: 0~100
CONTRAST:
Adjust the contrast of screen. Adjust area: 0~100
CLOCK:
Adjust the full screen by manual when auto adjust function is
not
Working
PHASE:
Adjust the phase of screen. Adjust area: 0~100
16
H-POSITION:
Adjust Vertical Position
Adjust area: 1~100
V-POSITION:
Adjust Vertical Position
Adjust area: 1~100
ZOOM:
Adjust Ratio Position
Adjust Type: 16:9 /4:3
RESET
Yes: Reset the Value
No: Don’t reset the Value
EXIT: Exit to menu mode
OPTION: Setting more functions in VGA mode(please refer to
next page)
17
Option Menu List of VGA mode:
Volume: Adjust volume from 0-100
Mute: on/off
Dimmer: Select Auto Dimmer/Bright/Dark/Normal
R_TEMP: Adjust RED Color Range from 0-100
G_TEMP: Adjust Green Color Range from 0-100
B_TEMP: Adjust Blue Color Range from 0-100
CCD_Mirror: Set Mirror on/off for V3
Mirror: On/Off (For V1/V2)
LANGUAGE: English, Spanish, French, German, Italian.
DEFAULT: Return all controls back to factory setting
Exit: Exit to menu mode
18
8. Replacing Batteries Of Remote Controller
(1) Always use new batteries when replacing the old set.
(2) Do not attempt to charge, short-circuit, disassemble,
hurt or burn used batteries.
(3) Battery replacement is necessary when remote
controller acts sporadically or stops on the remote
controller
(4) Do not drop, apply shock or stop on the remote
controller
(5) Do not spill water on the remote controller
(6) Do not place objects between the remote controller
and remote control receiver.
(7) Do not use remote controller for other equipment at
the same time.
(8) If the monitor does not operate even when operating
the remote controller from a close range, it is time to
replace the batteries (products number: RC2025),
Refer to the lab
19
9. STANDARD PACKAGE:
. All-in-One Extension cable(Power x1, Video x3, Audio x2, VGA
x1,
USB x1)
. CD-Disk for TouchKit driver x 1
. CD-Disk for Web Camera driver x 1(Web Cam Model)
. Touch Stylus Pen x 1
. VESA Stand with Screw Sets x 1
. 3M Sticker x 1
. Remote Controller With Battery x 1
. AC Switching Power Supply x 1
. Car Cigarette Lighter Adapter x 1
. User’s Manual x 1
20
10. Precaution
1. To prevent the traffic accident, do not operate the monitor
while driving.
2. Do not add pressure to the screen.
3. Do not sprinkle any liquid to clean LCD.
If you need to clean
it, please use LCD Clean cloth.
4. Please do not add any parts or use any accessory which is not
provided from the manufacturer.
5. Please do not use and store in the high temperature. (Storage
-30~+85℃, Operating -30~+85℃)
6. When you connect cable, please make sure Anode (Positive)
and Cathode (Negative) is correct.
If incorrect, it might
damage your LCD.
7. Please be careful when moving the monitor, avoid to damage
the LCD.
21