it`s not the stove, it`s

Transcription

NO MORE SMOKE FILLED ROOMS!
Tired of explaining that “it’s not
the stove, it’s the chimney”?
The Draw Collar™ solves your
biggest wood stove problem...
SMOKE FILLED ROOMS!
The Draw Collar™
installs easily in line
with the flue pipe,
comes in stove pipe
black, and plugs into
any 110v AC outlet.
1. Primes the flue before starting
the fire
2. Prevents down drafts through
the night
3. Maintains chimney draw, keeping out cold air when the fire is
out
4. Silent (no fan)
5. No obstruction in the flue.
DCU-0600
DCU-0700
DCU-0800
DCWI
Tested in labs of industry leaders, the Draw
Collar™ heats safely to
450° in no time at all.
New inserts with secondary combustion struggle
to get enough heat up
the flue to create draw.
The DCWI is compact
enough to fit almost all
applications.
6” Draw Collar
7” Draw Collar
8” Draw Collar
6” Insert
The DCWI will generate
more than 600 degrees
of heat in the flue. It’s
built with high grade 304
stainless steel for safety
and durability and comes
with a built-in thermostat control that will shut
the heater off once the fire
is going and will turn
back on when the fire dies
down.
Simply replace a twelve-inch section of stove pipe with the Draw
Collar. Sometimes this will require cutting a twelve-inch section
out of existing flue.
139
DCC DOUBLE WALL STOVE PIPE
PIPE SECTION
ADJUSTABLE LENGTHS - TWO-PIECE
TELESCOPING SECTION
Ameri-Tec® double wall pipe sections feature stainless steel inner liners with easy-toinstall and disassemble screw joint assembly.
Cat No.
6DCC-12BK
8DCC-12BK
6DCC-18BK
8DCC-18BK
6DCC-24BK
8DCC-24BK
6DCC-36BK
8DCC-36BK
6DCC-48BK
8DCC-48BK
Size
6”
8”
6”
8”
6”
8”
6”
8”
6”
8”
ID
6”
8”
6”
8”
6”
8”
6”
8”
6”
8”
OD
7”
9”
7”
9”
7”
9”
7”
9”
7”
9”
90° ELBOW
Size
6”
8”
DCC-18A
Adjjustable Length 18” section telescopes into pipe section for adjustments from 3” to 15”.
A
Fixed 90° elbow is used for connecting
pipe sections to the chimney system.
Cat No.
6DCC-90-BK
8DCC-90-BK
DCC-6A
Adjustable Length
6-inch secion. Telescopes
into pipe section for
adjusments from 2-1/2”
to 5”.
DCC-TS5
The two-piece telescoping section 5-foot length Telescopes
between stove to supports for adjustments from 3-1/2 feet to
5-1/2 feet.
B
B
10”
12”
A
9-1/4”
11-1/4”
Cat No.
6DCC-A-BK
8DCC-A-BK
6DCC-TS5-BK
8DCC-TS5-BK
6DCC-18A-BK
8DCC-18A-BK
STOVE ADAPTER
Six inch high adaptor fits over
tall stove collars.
Cat No.
6DCC-SA-BK
8DCC-SA-BK
6”
Size
6”
8”
Fixed 45° elbow is used for connecting
pipe sections to the chimney system.
A
A
4-1/2”
4-3/4”
B
5”
6”
INCREASERS/Oval to Round
Increasers may be used at either the top
or bottom of DCC connector systems to
7”
increase a 6” DCC to an 8” DCC.
Cat No.
6XDCC-8 -BK
8DCC-ORA-BK
OD
7”
9”
7”
9”
7”
9”
The kit includes two 24” pipe sections, one
18” adjustable length and one stove
adaptor. Kits are available in 6” and 8”
sizes to accomodate vertical
installations up to 66”.
45° ELBOW
Size
6”
8”
ID
6”
8”
6”
8”
6”
8”
DOUBLE WALL CONNECTOR KIT
B
Cat No.
6DCC-45-BK
8DCC-45-BK
Size
6”
8”
6”
8”
6”
8”
Size
6” to 8”
8” Oval
Call 1-800-522-8216 for Double Wall Black Pipe Catalog
Cat No.
6DCC-K-BK
8DCC-K-BK
TEE
Tee is used where stovepipe connection
is made at the rear of the appliance.
Cat No.
6DCC-T-BK
8DCC-T-BK
Size
6”
8”
A
13”
15”
B
3”
3”
A
B
140
BLACK PIPE & FITTINGS
Stk. #
Size
#600
4-24-600
5-24-600
6-24-600
7-24-600
8-24-600
#600A
4-24-600A
5-24-600A
6-24-600A
7-24-600A
8-24-600A
Pk.
24 GAUGE 24” PIPE
4”
5”
6”
7”
8”
24 GAUGE 12” PIPE
4”
5”
6”
7”
8”
10
10
10
10
10
#616
10
10
10
10
10
5”
6”
7”
8”
5x4”
6x4”
6x5”
7x4”
7x5”
7x6”
8x5”
8x6”
8x7”
120mmx6”
125mmx6”
175mmx6”
175mmx8”
10
12
12
12
12
12
12
10
12
EA
EA
EA
EA
24 GA. BL. INCREASER - LARGE END CRIMPED
4x5-612
4x6-612
4x7-612
5x6-612
5x7-612
5x8-612
6x7-612
6x8-612
7x8-612
#610
6
6
6
6
24 GA. BL. REDUCER - SMALL END CRIMPED
5x4-611
6x4-611
6x5-611
7x4-611
7x5-611
7x6-611
8x5-611
8x6-611
8x7-611
LM6
05-124817
175R62B
175R82B
#612
6
6
6
6
24 GA. BL. DRAW CONNECTOR
5-616
6-616
7-616
8-616
#611
5X4”
6X4”
7X4”
8X4”
4x5”
4x6”
4x7”
5x6”
5x7”
5x8”
6x7”
6x8”
7x8”
10
6
12
12
12
12
12
10
12
24 GA. BL. ROUND/OVAL BOOT - 1 PIECE
6X6-610
7X6-610
7X7-610
8X8-610
6x6”
7x6”
7x7”
8x8”
12
6
12
12
Size
Pk.
#602 24 GAUGE ADJUSTABLE ELBOW
4-24-602
5-24-602
6-24-602
7-24-602
8-24-602
4”
5”
6”
7”
8”
4
4
4
4
4
4#602C 24 GA. BL. CORR. ELBOW 90°
#606 24 GA. STARTER CRIMP BOTH ENDS - SEAMED
5X5-606
6X6-606
7X7-606
8X8-606
Stk. #
4 1/2” x 7 3/4”
4 1/2” x 9”
4 3/4” x 8 3/4”
5 1/2” x 11 1/4”
BM0022
6-24-602C
BM0024
8-24-602C
5”
6”
7”
8”
4
4
4
4
#603
24 GAUGE BL. ANGLE 45°
#604
24 GAUGE BLACK TEE
5-24-603
6-24-603
7-24-603
8-24-603
4-604
5-604
6-604
7-604
8-604
5”
6”
7”
8”
4
4
4
4
4”
5”
6”
7”
8”
ea
ea
ea
ea
ea
#603SE
24 GA. BL. PLUG - CRIMPED
#603LE
24 GAUGE BLACK TEE CAP
#605
24 GAUGE TRIM COLLAR
4-603SE
5-603SE
6-603SE
7-603SE
8-603SE
4-603LE
5-603LE
6-603LE
7-603LE
8-603LE
4-605
5-605
6-605
7-605
8-605
4”
5”
6”
7”
8”
4”
5”
6”
7”
8”
4”
5”
6”
7”
8”
FLUESTOP-BK
BM0026
BM0227
BM0353
CID
3-CID
4-CID
5-CID
6-CID
7-CID
8-CID
10-CID
141
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
BLACK FLUESTOP
Black
Brass
Almond
12
12
12
CAST IRON DAMPERS
3”
4”
5”
6”
7”
8”
10”
12
12
12
12
12
12
Slip Connector
- 24 ga.
Stock #
BM0042
BM0043
BM0044
HEARTH ACCESSORIES
Botanical Pipe-Sham
Pipe-Shams from Minuteman
International are designed to fit a
standard 6” - 6 5/8” stove pipe
and come in four lengths
plus an elbow.
Finish: Graphite Powdercoat
Size
6” x 12” BM Connector
Telescopic Stove
Pipe - 24 ga.
30” to 56”
Stock #
BM0123
BM0125
Size
6” BM Telescopic Stove Pipe
8” BM Telescopic Stove Pipe
Oval to Round
Tapper
QA Atlantic Adapter
9” x 3/4” Oval Base
7-3/8” x 4-1/2” Oval Top
16” High
Stove Top Drip Free
Connector - 24 ga.
Stock #
BM0314
Stock #
SP-10-6
SP-10-9
SP-10-12
SP-10-24
SP-10E
Size
6” x 4” BM Adapter
Size
6” Section
9” Section
12” Section
24” Section
Elbow
INSUL-FLUE
Wall Unit & Thimble
Item
Wall Unit
Wall Unit
Wall Unit
Thimble
Thimble
Thimble
Thimble
Thimble
Thimble
Size (DxL) inches
6
7
8
6x8
7x8
8x8
6x12
7x12
8x12
Order #
80010600
80010700*
80010800
80100608
80100708*
80100808
80100612
80100712
80100812
Note: SDV wall unit fits Simpson Dura-Vent™ double wall pipe. Order 2 wall units and one thimble for through
inside wall application. Illustration shows typical Thru-the-Wall installation. Insulating sleeves protect wall and any
adjacent combustibles on both sides. Insulating thimble isolates wall itself - helps prevent overheating of wood bracing drywall, wallpaper, paint.
*Special Order
142
IMPERIAL PIPE &
ELBOW SHIELDS
INSUL-PLUG
Insulated
Chimney
Plug
Size (DxL)
inches
6
7
8
The adjustable telescopic feature of
the Imperial Stove Pipe Heat Shield
allows you to extend the length
from 22-1/2” to 42”.
Minimum
Maximum
Order #
6
6.75
7.75
6.375
7.125
8.125
810106
810107
810108
Note: Used to seal up an old thimble home. Insert plug in old thimble
hole and tighten expansion bolt on face. Insulation expands causing a
tight fit. Constructed of ceramic fiber insulation material.
GALVANIZED FITTINGS
S #335
4-335
5-335
6-335
7-335
8-335
STORM COLLAR
4”
5”
6”
7”
8”
6
12
12
12
12
Both Imperial
UL/ULC listed
Stove Pipe and 90°
Elbow Heat Shields
are adaptable to 5”,
6”, 7” and 8” stove
pipe.
They protect walls and ceilings
where clearances between flue pipe
and walls have been reduced by the
use of stove boards.
Part #
BM0234
BM0133
MANTLE PROTECTOR
Recommended to protect existing fireplace mantels from heat generated by
fireplace-insert stoves. Kit includes 47”
long mantel protector, all mounting
hardware, and instructions
#1200 ADJUST. ROOF FLASHING 0/12-6/12
4-1200
5-1200
6-1200
7-1200
8-1200
#327
4”
5”
6”
7”
8”
3”
4”
5”
6”
7”
8”
#315
THIMBLES
#315
GV0926-C
Part #
MNTL
6X12
8X12
Finish
Black oxide
Qty.
1
DRAFT CONTROL
SHANTY CAP
3-327
4-327
5-327
6-327
7-327
8-327
6X12 - 315
8X12 - 315
6
6
6
6
6
Description
90° Stove Pipe Elbow Heat Shield
Black Pebble Finish
Adj. Stove Pipe Heat Shield
Black Pebble Finish
12
12
12
12
12
12
A draft control is a simple
solution to a complex
problem. The draft control provides for a consistent, stable air supply
for efficient burn in wood
stoves, oil fired furnaces,
boilers, space heaters and
camp stoves. The most
popular draft control on
the consumer market is
the B-34TJ.
12
12
B34TJ05B
B34TJ06B
B34TJ07B
B34TJ08B
ADJUSTABLE THIMBLE
6” - 7” - 8”
143
5”
6”
7”
8”
CHIM-A-LATOR DELUXE
The Stainless Steel Adjustable, Top-Sealing
Fireplace Damper
The Chim-A-Lator Deluxe easily mounts on top od a masonry fireplace flue and is operated by a convenient, adjustable regulator installed on the side wall of the fireplace. It is
far more efficient than conventional cast iron dampers and the ideal replacement for old
defective dampers. Proven for over 30 years to be the most trouble-free top sealing damper.
Flue
Size
8x8
8 x 13
8 x 18
8 x 20
10 x 18
12 x 12
13 x 13
12 x 16
13 x 18
13 x 21
16 x 16
16 x 20
18 x 18
18 x 21
20 x 20
20 x 24
24 x 24
Use Outside Dimensions of Flue Tile
Width
(from-to)
7 - 9.25
7 - 9.25
7 - 9.25
7 - 9.25
8 - 10.25
10 - 12.25
11 - 13.5
10 - 12.5
11 - 13.5
11 - 13.5
14 - 16.25
14 - 16.25
16 - 18.25
16 - 18.25
18 - 20.25
18 - 20.25
22 - 24.25
Length
(from-to)
9 - 9.25
11 - 13.5
16 - 18.25
18 - 20.25
16 - 18.25
10 - 12.25
11 - 13.5
14 - 16.25
16 - 18.25
19.5 - 22
14 - 16.25
18 - 20.25
16 - 18.25
19.5 - 22
18 - 20.25
22 - 24.25
22 - 24.25
AIR SUPPLY VENTILATOR
An intelligent solution for make-up
air. Filtered. Adjustable. Draft-free.
The solution your customers will
love to live with.
Draft failure. Poor Performance. Moisture
or odor problems. Dangerous build-up of
carbon monoxide. All this can result from
inadequate ventilation.
Order
No.
50808
50813
50818 *
50820 *
51018 *
51212
51313
51216
51318
51321 *
51616 *
51620 *
51818 *
51821 *
52020 *
52024 *
52424 *
INSERT
ADAPTOR
Today’s homes are tighter. Even the best
equipment, properly installed, will fail to
operate as intended in an air-starved environment.
Wood or gas... vented or vent-free...
EVERY combustion appliance needs fresh
air and balanced pressure.
• Tough molded ABS Polymer
• UV and temperature stable
• Condensate resistant
• Sound dampening
• Three year warranty
• Complete with 2 tubes, dust filter and
hardware pack
ASV Dimensions
Interior Cover size
Exterior Grille size
Tube dimension (2)
ASV-90
If you’re installing any equipment or
appliance that uses oxygen or removes air
from the home, you need to plan ventilation into the job. You need the ASV-90.
Insert Adaptors are made from
type 316L Stainless Steel.
Adjustable a full 6” from front to
back
Low profile (only 3” box height)
6” x 6” x 2”
5 1/2” x 5 1/2”
4” dia. x 6” long
List
5350906
5350908
Air Supply Ventilator
*Special Order
Stainless Steel Insert Offset
Adaptor
144
6”
8”
CHIMNEY CAPS
Quality Stainless Steel and Black Galvanized Chimney Caps
Black Galvanized Steel Chimney Caps - Square
Note: Leg Kits #390004
Use Outside Dimensions (in)
Flue
Width
Size
(from-to)
8x8
7 - 9.25
8 x 13
7 - 9.25
8 x 18
7 - 9.25
12 x 12
10 - 12.25
13 x 13
11 - 13.50
12 x 16
10 - 12.50
13 x 18
11 - 13.50
16 x 16
14 - 16.25
16 x 20
14 - 16.25
18 x 18
16 - 18.25
20 x 20
18 - 20.25
20 x 24
18 - 20.25
24 x 24
22 - 24.25
3/4” Mesh Chimney Caps
Length
Order
(from-to)
No.
9 - 9.25
330808
11 - 13.5
330813
16 - 18.25
330818
10 - 12.25
331212
11 - 13.50
331313
14 - 16.25
331216
16 - 18.25
331318
14 - 16.25
331616
18 - 20.25
331620 *
16 - 18.25
331818
18 - 20.25
332020 *
22 - 24.25
332024 *
22 - 24.25
332424 *
Stainless Steel Chimney Caps - Square
Note: Leg Kits #390004
Use Outside Dimensions (in)
Flue
Width
Size
(from-to)
5x8
4 - 6.25
8x8
7 - 9.25
8 x 13
7 - 9.25
8 x 18
7 - 9.25
12 x 12
10 - 12.25
13 x 13
11 - 13.50
12 x 16
10 - 12.50
13 x 18
11 - 13.50
16 x 16
14 - 16.25
16 x 20
14 - 16.25
18 x 18
16 - 18.25
20 x 20
18 - 20.25
20 x 24
18 - 20.25
24 x 24
22 - 24.25
3/4” Mesh Chimney Caps
Length
Order
(from-to)
No.
7 - 9.25
430508
9 - 9.25
430808
11 - 13.5
430813
16 - 18.25
430818
10 - 12.25
431212
11 - 13.50
431313
14 - 16.25
431216
16 - 18.25
431318
14 - 16.25
431616 *
18 - 20.25
431620
16 - 18.25
431818
18 - 20.25
432020 *
22 - 24.25
432024 *
22 - 24.25
432424 *
Stainless Steel Crown Mounted Caps
Screen Size
Order #
One-Piece Assembled Caps
491414
491717
Knocked Down Caps
491419
491421
491423
491425
491427
491429
491431
491433
491435
491437
491439
491441
491725
491727
491729
491731
491733
491735
491737
491739
491741
14 x 14
17 x 17
Note: Order by Screen Dimensions
Lips with Holes are 1.25” Wide
Note: Bolt together corners on knocked
down caps for aded strength
14 x 19
14 x 21
14 x 23
14 x 25
14 x 27
14 x 29
14 x 31
14 x 33
14 x 35
14 x 37
14 x 39
14 x 41
17 x 25
17 x 27
17 x 29
17 x 31
17 x 33
17 x 35
17 x 37
17 x 39
17 x 41
145
Cover Size
12 x 23
23 x 23
20 x 29
20 x 29
20 x 29
20 x 35
20 x 35
20 x 35
20 x 41
20 x 41
20 x 41
20 x 47
20 x 47
20 x 47
23 x 35
23 x 35
23 x 35
23 x 41
23 x 41
23 x 41
23 x 47
23 x 47
23 x 47
*Special Order
CUSTOM MADE CHIMNEY COVERS
How to order a custom chimney cover:
Band-Around Brick:
(BAB)
1. Determine what style of chimney cover
that you would like to order:
Aluminum or
Stainless Steel
Band-Around Brick: (BAB) Aluminum or Stainless Steel
Skirt Type:
(SKIRT)
Aluminum only
Clamp - to-Tile:
(CTT)
Skirt Type: (SKIRT) Aluminum only
• Measure the outside dimension of the top row of bricks on all four
sides of the chimney, (exact measurements are very important), (see
illustration #1).
• Measure the tile height from the top of the first row of brick to the top
of the tallest tile, (see illustration #2).
Clamp - to-Tile: (CTT) & Cement-on: (CMNT) Aluminum Only
Aluminum Only
• Call HY-C Company (Customer Service Department), 1-800-325-7076, for
specific instructions for these style of cover.
Cement-on:
(CMNT)
Aluminum Only
Illustrations 1-3
#1
36 1/2”
TILE
TILE
23 1/2”
23”
• Measure the outside dimension of the top row of bricks on all four
sides of the chimney, (see illustration #1).
• Measure the tile height from the top of the first row of brick to the top
of the tallest tile, (see illustration #2).
TILE
2. Calculate your cost on the cover by
using the formula and guidelines below:
Add the width and the length of the cover together to determine the
sum, multiply the sum by the appropriate factor on the chart below
(round the length and width up to the nearest whole number for pricing).
Width (W) + Length (L) = Sum (S) or W + L = S
Sum (S) x Factor (F) or S x F = Cost
Standard 8” or 9” Braces12” Braces15” Braces18” Braces-
Examples: Aluminum Cover - W = 18”, L = 32”, with std. Braces
18 + 32 = 50 then 50 x 3.10 = $155.00
Stainless Steel Cover - W = 27”, L = 61”, with std. Braces
27 + 61 = 88 then 88 x 6.00 = $528.00
36”
#2
9” Braces
3 1/2”
2” Braces
3 1/2”
5” Braces
6”
6”
9”
Aluminum Cover - W = 22”, L = 54”, with 15” Braces
22 + 54 = 76 then 76 x 2.91 = $221.16 then
$221.164 x 1.20 = $265.39
8” Braces
CHIMNEY
WIDTH
CHIMNEY
LENGTH
Less than 48”
15” to 24”
48” to 70”
70” to 89”
Less than 48”
24” to 32”
48” to 70”
70” to 89”
Less than 48”
32” to 39”
48” to 70”
70” to 89”
MINIMUM CHARGE
9” 12”
#3
8” Braces
6 1/2”
2” Braces
6 1/2”
HY-C
Use Regular Formula to Determine Cost
Add 18% to Formula Cost, (multiply by 1.18)
9”
5” Braces
9” 12”
Company, Inc.
ALL CUSTOM COVERS SHIPPED KNOCKED-DOWN
For pricing information on cover szes not shown on the
chart or any other questions, please call: 1-800-522-8216
146
CHIMNEY KITS
Round Kit
- Flat Ceilings
The Round Kit contains stainless steel
round cap, round flashing, round storm
collar, ceiling support, and single-wall
adapter.
6HS-RKS
8HS-RKS
Ceiling Support
Round Cap
12.3 lbs.
13.3 lbs.
Round Flashing
Single-wall
Adapter
Round Storm Collar
Open Beam Kit
- Cathedral Ceilings
The Open Beam Kit contains stainless
steel round cap, round flashing, round
storm collar, roof support, and singlewall adapter.
6HS-RKRS
8HS-RKRS
18” Standard
Roof Support
Round Cap
18.5 lbs.
19.5 lbs.
Round Flashing
Single-wall
Adapter
Round Storm Collar
Through-the-Wall Kit
Through-the-Wall Kit contains stainless
steel cap, tee assembly, round flashing,
round storm collar, wall support, painted
wall thimble, and three support bracket
assemblies.
6HS-TWK
8HS-TWK
38.5 lbs.
46.8 lbs.
Round Storm Collar
Round Flashing
Round Cap
Tee Assembly
Three Support
Bracket Assemblies
Round Storm Collar
147
Wall
Thimble
Call 1-800-522-8216 for All Fuel Catalog
ALL FUEL CHIMNEYS
148
AmeriVent All Fuel Chimney AmeriVent All Fuel Chimney
Model HS
Model HS
6”
Description
Chimney Sections - 6” Length
- 12” Length
8”
Part
No.
Pcs/
Ctn.
Lbs/
Ctn.
6HS-6
1
5.0
6HS-12
1
5.0
- 12” Length
Description
Chimney Sections - 6” Length
Part
No.
Pcs/
Ctn.
Lbs/
Ctn.
8HS-6
1
7.0
8HS-12
1
7.0
- 18” Length
6HS-18
1
7.0
- 18” Length
8HS-18
1
9.0
- 24” Length
6HS-24
1
10.0
- 24” Length
8HS-24
1
13.0
- 36” Length
6HS-36
1
13.5
- 36” Length
8HS-36
1
17.0
- 48” Length
6HS-48
1
20.0
- 48” Length
8HS-48
1
26.0
Chimney Tee Assembly w/Cap
6HS-TA
1
14.0
Chimney Tee Assembly w/Cap
8HS-TA
1
19.0
Tee Cap
6HS-TCAP
1
0.3
Tee Cap
8HS-TCAP
1
0.3
Wall Thimble (painted)
6HS-WTP
1
5.5
Wall Thimble (painted)
8HS-WTP
1
5.5
15° Offset (use in pairs/2/ctn.)
6HS-015
pr.
6.3 pr.
8HS-015
pr.
7.5 pr.
6HS-030
pr.
8.3 pr.
8HS-030
pr.
10.0 pr.
Firestop Assembly
6HS-FSA
6
12.0
Firestop Assembly
8HS-FSA
6
12.0
Support Bracket Assembly
6HS-SBA
1
2.0
Support Bracket Assembly
8HS-SBA
1
2.5
Wall Support w/Clean-out
6HS-WS
1
5.0
Ceiling Support Assembly
6HS-CSA
1
5.3
Wall Support w/Clean-out
8HS-WS
1
6.0
Pipe End Plate
6HS-EP
1
1.0
Ceiling Support Assembly
8HS-CSA
1
5.3
Pipe End Plate
8HS-EP
1
1.0
Flat to 12/12 Pitch
6HS-RSA12
1
10.0
13/12 to 24/12 Pitch
6HS-RSA24
1
17.0
Flat to 12/12 Pitch
8HS-RSA12
1
8.5
6PL-WFP-BK
1
3.0
13/12 to 24/12 Pitch
8HS-RSA24
1
17.0
Roof Support Assemblies
Wall Face Plate
Anchor Plate
6HS-AP
1
3.0
Adjustable Roof Support Assem.
6PL-ARSA
1
3.5
Flat to 2/12 Pitch
6PL-R2FP-BK
1
6.8
3/12 to 4/12 Pitch
6PL-R4FP-BK
1
6.8
5/12 to 6/12
6PL-R6FP-BK
1
6.8
7/12 to 8/12
6PL-R8FP-BK
1
6.8
11/12 to 24/12
6PL-R12FP-BK
1
6.8
Ceiling Support Face Plate
6HS-CSFP
1
1.5
Roof Support Face Plate
6HS-RSFP
1
1.0
Square Adjustable Face Plate
6PL-SAFP-BK
1
6.8
Cap - Multi-purpose
6PL-MPC
1
3.0
Storm Collar - Galvanized Adjust
PL-ASCWG
1
0.5
Round Adjustable Face Plates
Roof Support Assemblies
Anchor Plate
8HS-AP
Adjustable Roof Support Assem.
8PL-ARSA
1
3.5
Flat to 2/12 Pitch
8PL-R2FP-BK
1
6.8
11/12 to 24/12
8PL-R12FP-BK
1
6.8
Round Adjustable Face Plates
Wall Face Plate
8PL-WFP-BK
1
3.0
Ceiling Support Face Plate
HS-CSFP
1
1.5
Joist Sheild
8HS-JS
1
6.0
Roof Support Face Plate
HS-RSFP
1
1.0
Square Adjustable Face Plate
PL-SAFP-BK
1
6.8
Cap - Multi-purpose
8PL-MPC
1
3.0
Storm Collar - Galvanized Adjust
PL-ASCWG
1
0.5
Round Flashings
Std. Flat to 6/12 pitch - 4” Skirt
Round Flashings
Std. Flat to 6/12 pitch - 4” Skirt
6F
4
2.3
Flat to 6/12 pitch - 6” Skirt
6FFU
6
3.3
7/12 to 12/12 Pitch 6” Skirt
6FFU12
1
7.5
6FFU18
1
8.5
6FFU24
1
10.0
Tall Cone Flashing
6FT
4
4.0
Attic Insulation Shield
6HS-AIS
1
12.0
Single-Wall Adapter
6SWA
1
0.5
Roof Brace Kit
6HS-RBK
1
8.0
8F
4
3.5
Flat to 6/12 pitch - 6” Skirt
8FFU
6
4.5
8FFU12
1
8.0
8FFU18
1
9.5
8FFU24
1
12.0
Tall Cone Flashing
8FT
4
5.0
Attic Insulation Shield
8HS-AIS
1
13.3
Single-Wall Adapter
8SWA
1
0.5
Anchor Plate
8HS-AP
1
4.5
Roof Brace Kit
8HS-RBK
1
8.0
149
STAINLESS STEEL FLEXIBLE LINER KIT
Stainless Steel Two-Piece Flex Tee Kit (Type 316L)
Size
Order #
3 inch diameter x 25 ft
98510325
98510525*
98510425
98510625
98510635
98510725*
98510825
Note: Kit includes: 25' S.S. Flexible Liner, Termination Cap, 13x13 Top Plate. 2-piece Flex Tee, Flex Tee Cap
304SS Flex Adapter
Size
4”
5”
6”
7”
8”
Nose/Pull Cones
Order #
4454SS
4555SS
4656SS
4757SS
4858SS
Size
4” to 4.25 Flex
5” to 5.25 Flex
6” to 6.25 Flex
7” to 7.25 Flex
8” to 8.25 Flex
15° 304SS Standard to Flex Elbow
Size
6”
8”
*Special Order
Order #
4511 FLEX
4611 FLEX
4711 FLEX
4811 FLEX
Order #
3AFL-NC
4AFL-NC
5AFL-NC
6AFL-NC
7AFL-NC
8AFL-NC
Order #
4609 FLEX
4809 FLEX
Size
5”
6”
7”
8”
Size
3”
4”
5”
6”
7”
8”
Size
6”
7”
8”
Order #
4610 FLEX
4710 FLEX
4810 FLEX
Size
6”
7”
8”
150
Order #
4614 FLEX
4714 FLEX
4814 FLEX
STAINLESS STEEL LINERS
Pellet Coupling/Increaser
This fitting will connect round flex
pipe to round flex pipe. Double
wall construction eliminates air
leakage at seams.
Available in 3” or 4” diameter.
5305
3” diameter
5405
4” diameter
Also available as a 3” to 4” increaser.
5407
Pellet Tee
Used to connect a pellet
stove to flex pipe. Double
wall construction eliminates
air leakage at seams. Available in 3” or 4” diameter.
5302
3”
5402
4”
24 Ga. Two-Piece Flex
Tee (Type 316L)
Size
5
5.5
6
7
8
Order #
98630105*
986301055*
98630106
98630107*
98630108
Pellet Increaser Tee
Used to connect a 3” pellet stove to 4” flex pipe.
Double wall construction
eliminates air leakage at
seams.
5432
3” x 4”
24 Ga. Universal Connector (Type 316L)
Size
5
5.5
6
7
8
Order #
98531005*
985310055*
98531006
98531007*
98531008
Pellet Clamp
This 304 stainless steel clamp is
used to provide an airtight seal
between a tee (or coupling) and
the exhaust outlet on a pellet
stove.
4307
4407
Flexible to Flexible
Stainless Steel Adapter
Size
6
8
Stainless Steel Chimney Cap – Round
Use Outside Dim.
Flue
Size
6”
7”
8”
9”
10”
11”
12”
13”
14”
15”
16”
17”
18”
Tile OD
(From - to)
6.125” - 7”
7.125” - 8”
8.125” - 9”
9.125” - 10”
10.125” - 11”
11.125” - 12”
12.125” - 13”
13.125” - 14”
14.125” - 15”
15.125” - 16”
16.125” - 17”
17.125” - 18”
18.125” - 19”
3” diameter
4” diameter
Stainless Steel Support
Plate - 18 Gauge 6” Collar
Size
9”x9”
9”x13”
13”x13”
13”x18”
18”x18”
24”x24”
Order #
535006
535008
Order #
681006
681206
681406
681706
681906
682406
Black Galvanized Chimney Cap – Round
Use Outside Dim.
3/4”
Mesh
Order #
Flue
Size
6”
7”
8”
9”
10”
11”
12”
13”
14”
15”
16”
17”
18”
440006
440007
440008
440009
440010
440011
440012
440013
440014
440015
440016
440017
440018
151
Tile OD
(From - to)
6.125” - 7”
7.125” - 8”
8.125” - 9”
9.125” - 10”
10.125” - 11”
11.125” - 12”
12.125” - 13”
13.125” - 14”
14.125” - 15”
15.125” - 16”
16.125” - 17”
17.125” - 18”
18.125” - 19”
3/4”
Mesh
Order #
340006
340007
340008
340009
340010
340011
340012
340013
340014
340015
340016
340017
340018
*Special Order
Stainless Wire Mesh - 25’ Rolls
Order #
519007
519011
Fits Liner Sizes
4” - 7”
8” - 9”
Foil Tape
Description
2” x 50 Yard
8 lb. Ceramic Wool Insulation
Blanket Foil Faced 25’ Rolls
Order #
517022
517025
517029
518022
518025
518029
Order #
517001
CHIMNEY CRICKET
Size - Inches
.25 x 22
.25 x 25.5
.25 x 29
.5 x 22
.5 x 25.5
.5 x 29
Fits Liner Sizes
5, 6 inch
7 inch
8 inch
5, 6 inch
7 inch
8 inch
Made of Heavy Gauge Galvanized Steel. Place
up the roof from your chimney or vent pipe
to help protect it from sliding snow and ice. 2"
turned edge for fastening to roof.
CC1
CC2
CC3
12"
24"
36"
MATCH HOLDERS
MH-01
MH-30
X800204
FIREPLACE
CLOSURE HOOD
X304160
Reduces Smoke Roll Out
Wrought Iron Match Holders
Finish: Graphite Powdercoat
MH-01
Maple Leaf; 14-1/2”H
MH-30
Twisted Rope; 3”W x 3”D x 9”H
Stock #
FSG-BLK
FSG-BLK-6
FSG-BLK-8
FSG-BRS
Polished Solid Brass Match Holders
X800204
X304160
13”H
8-1/2”H; Oak Base
152
Color
Black
Black
Black
Brass
Height
4.5”
6”
8”
4”
Weight
5
6
7
5
FIREPLACE CONNECTOR SYSTEMS
WOOD
FlexLine™ fireplace connector system provides a
safe and reliable connection between a woodburning stove and a masonry fireplace. Each system
has been carefully tested and listed by UL to assure
proper design and consistent construction. All of
the parts needed for one complete installation are
included in each FlexLine™ system. The connector systems accomodate oval, round or rectangular
stove outlets and usually install without any alteration of the fireplace. The fireplace connector easily
passes through the damper frame and extends into
the first clay liner as required by N.F.P.A. 211. When
a total reline is desired, reline pipe and fittings can
be added to the system.
All components in the FlexLine™ system are manufactured out of 304 stainless steel* for guaranteed
long life and durability.
Model 4876 Fireplace Connector
with Reline
Model 4808 Fireplace Connector
with Clay Liner Plate
* Block-off plate is 22 ga. aluminized steel.
Flexboot
Oval-to-round
fitting
used to connect a FlexLine™ to rigid reline
pipe. Smallest transition
part on the market.
4096
small
4138A large
Each connector kit contains 4’ of oval flex pipe, a 48” block-off plate, Owens-Corning™ hi-temp gasket, stove fitting,
support poles and hardware.
Model 4803
has a 3” round inlet (9.4
sq. in. area). Flex pipe is
3”x6’.
Model 4804
has a 4” round inlet
(12.6 sq. in. area). Flex
pipe is 4 “ x 6’.
Model 4866
Has a 6” oval inlet (26
sq. in. area). Oval flex
pipe is
4-1/4” x 7-3/4” x 4’.
Model 4875
Has a 6” round inlet (28
pipe is
4-1/4” x 9-1/2” x 4’.
Model 4886
Has a 8” oval inlet (41
pipe is
4-1/2” x 11” x 4’.
Model 4885
Has a 8” round inlet (50
pipe is
4-1/2” x 11-1/4” x 4’.
153
Model 4876
Model 4706
Model 4877
Model 4880A
Has a 6” round inlet (28 sq.
in. area). Oval flex pipe is
4-1/4” x 9-1/2” x 4’.
4-1/4” x 11” x 4’.
Model 4888
4-1/4” x 14-1/4” x 4’.
Has a 8” x 16” x 1-1/2” insert
fitting. Oval flex pipe is 4-1/4” x
9-1/2” x 4’. (33 sq. in. area).
Has a 8” x 16” x 1-1/2” insert
fitting. Oval flex pipe is 4-1/2” x
11” x 4’. (41 sq. in. area).
Model 4808
Has a 10-1/2” x 18” x 1-1/2” insert fitting. Oval flex pipe: 4-1/2”
x 14-1/4” x 4’. (55 sq. in. area).
BIOVENT CORN/PELLET VENTING
Making Eco-Friendly Fuels
Friendlier To Use
Gasket-sealed connections save time:
Bio VentTM from Bernard Dalsin Manufacturing
has been specifically designed to seal without
caulking during installation. Using an exclusive
pre-installed gasket, Bio VentTM pellet stove
venting products install in a fraction of the time
of other conventional venting products.
Super-corrosion-resistant metal
reduces callbacks:
Now you can sell corn-fueled pellet stoves with
confidence. All Bio VentTM products are constructed with AL29-4C 26-gauge Super-Ferrite
Stainless Steel – a premium blend of metal that
can withstand exhaust that turns other metal to
powder! Put simply, that means you won’t be
called back next year to replace stove venting
when your customer burns corn or corn-wood
mix fuel pellets.
3” Clearance (USA and Canada)
Bio VentTM Product Line is available in galvanized and powder coated (black) finishes. Kits
Available. Call for details.
Rigid Pipe
Adjustable Length Pipe
45° and 90° Elbows
Tee and End Cap
Appliance Adaptor
Cathedral Ceiling Kit
Telescoping Wall Thimble
Flat Ceiling Firestop Support
Adaptor Increaser
Inside Decorator Collar
Outside Wall Flashing
Adjustable Wall Straps
Deluxe Terminator
Diameter / Take Off
3” /2”
4”/2”
3”/3”
4”/3”
Note:
Length = 24”
Fresh air brought in between
inner and outer tube.
Includes 2.5’ of aluminum flex
Packaged 6 per carton
Order #
71440203
71440204
71440303
71440304
Wall Vent Kit
Flat Ceiling Vent Kit
Order #
711403KT
711404KT
Order #
713003KT
713004KT
Size
3”
4”
Size
3”
4”
Kit Includes: Vertical Vent Cap, Flat Ceiling Firestop Support
Inside Decorator Collar, Support Clamp, Vent Tee
Kit Includes: Horizontal Jet Cap, Telescoping Wall Thimble
Outside Wall Flashing, Inside Decorator Collar, Appliance Adaptor
Call 1-800-522-8216 for BioVent Literature
Vent Caps
Wall Vent Kit
Flat Ceiling Vent Kit
Fresh Air Intake Kit
154
3”
Description
Pipe - 3” Dia. x 6”
Pipe - 3” Dia. x 6” Black
Pipe - 3” Dia. x 18” SS
Pipe Adjustable 3” x 12”
Pipe Adjustable 3” x 12” Blk
45° Elbow 3” Dia
45° Elbow 3” Dia Black
90° Elbow 3” Dia
Adj. Flashing & Collar
Vertical Cap
Horizontal Jet Cap
Horizontal Cap
Appliance Adapter
Appliance Adapter Black
Harman Adapter
Harman Adapter Black
3” ECOTECK Adapter Black
3” x 3” Flex Adapter
Increaser 3” to 4”
Increaser 3” to 4” Black
Ceiling Support/Firestop
Vertical Support Clamp
Cathedral Ceiling Support
Wall Thimble
Inside Decorator Plate
Outside Wall Flashing SS
3” x 3” Tee w/Cap
3” x 3” Tee w/Cap Black
3” Starter Tee w/Cap
3” Starter Tee w/Cap Black
3” x 4” Starter Tee w/Cap
3” x 4” Starter Tee w/Cap Blk
3” End Cap
3” Wall Strap/Support
3” to 6” Class-A Adap
3” to 8” Class-A Adap
Tee Support Bracket
3” Replacement Gasket
CORN/PELLET VENTING
Part #
71010603
71010603B
71011203
71011203B
71011803
71011803B
71011803SS
71012403
71012403B
71013603
71013603B
71011103
71011103B
71024503
71024503B
71029003
71029003B
71410104
71040103
71030203
71030103
71080003
71080003B
71080003HS
71080003BHS
71080003ETB
71094303
71094304
71090304
71090304B
71201203
71210003
712603KY
71101203
71111203
71121203
71050303
71050303B
71050304
71050304B
71050303ST
71050303STB
71050304ST
71050304STB
71060003
71220103
71092603
71092803
71230103
71400104
Cnt
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
ea.
6
6
6
6
6
6
6
6
6
6
6
ea.
6
ea.
3
6
6
3
3
3
3
3
3
3
3
6
6
1
1
4”
Description
Pipe - 4” Dia. x 18” SS
Pipe Adjustable 4” x 12”
Pipe Adjustable 4” x 12” Blk
45° Elbow 4” Dia
90° Elbow 4” Dia
Adj. Flashing & Collar
Vertical Cap
Horizontal Jet Cap
Horizontal Cap
Appliance Adapter
Appliance Adapter Black
4”Travis Adapter Black
4”Travis Adapter Galvanized
Ceiling Support/Firestop
Vertical Support Clamp
Cathedral Ceiling Support
Wall Thimble
Wall Thimble Ext.
Inside Decorator Plate
Outside Wall Flashing SS
4” Starter Tee w/Cap
4” Starter Tee w/Cap Black
4” End Cap
4” Wall Strap/Support
4” to 6” Class-A Adap / Thimble
4” to 8” Class-A / Thimble
4” Replacement Gasket
Part #
71010604
71010604B
71011204
71011204B
71011804
71011804B
71011804SS
71012404
71012404B
71013604
71013604B
71011104
71011104B
71024504
71024504B
71029004
71029004B
71410105
71040104
71030204
71030104
71080004
71080004B
71094404
71080004TRVB
71080004TRV
71201204
71210004
712604KY
71101204
71101201
71111204
71121204
71050404
71050404B
71050404ST
71050404STB
71060004
71220104
71092604
7109284
71400104
Cnt
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
ea.
6
6
6
6
6
6
ea.
6
ea.
3
6
6
3
3
3
3
6
6
1
1
Fresh Air Intake Kit
Order #
71450002
71450003
952702255
Size
2”
3”
2”x25’ Air Intake
Kit Includes: 5’ of Alum Flex Liner, Vent Hood, Flex Decorator
Collar
155
Call 1-800-522-8216 for BioVent Literature
Outside Air Intake Regulator for Masonry Fireplaces
Fire burns warmer, cleaner, and safer because regulated
outside air is used for combustion. Air follows built-in
passage under your fireplace
Air-A-Lator® for New Construction
Type
Dimensions
Order #
NH
13.5”x4.5”x2.75”
200414
1B
9”x4.5”x2.75”
210409
Note:
Type “NH” & “1B” for New
Construction
Type “1B” is the size of one brick and has
the same advanced qualities as type “NH”.
18 gauge galvanized powder coated – black
10 per case
The “Mason’s Choice” Stainless Steel
Side Wall Outside Air Kit
Inner Dimensions
Order #
3”
230330
4”
230430
Note:
Telescopes 14” to 28”
Elbow adjusts 90° to 180°
26 gauge stainless steel (type 304)
Wall vent hood includes screen.
“Mason’s Choice”
(on side wall)
For optimum efficiency Air-A-Lator ® should be installed
in the front row of brick in center of fireplace with opening
facing fire or grate.
Features
Exclusive Dual Damper System gives you complete control of
combustion air. Other outside air intakes just let you control
the volume of air. The Air-A-Lator® Dual Damper System
gives you control not only of volume of air, but it also lets you
control the direction of air. Both are necessary to produce the
proper flames and control the rate of burning.
Slip In Air-A-Lator® for New
Construction or Retrofit
Type
Dimensions
Order #
NH
13.5”x4.5”x2.75”
220414
1B
9”x4.5”x2.75”
220409
Note:
Type “NH” & “1B” for New Construction or
Retrofit
Type “1B” is the size of one brick and has
the same advanced qualities as type “NH”
10 per case
Helps stop backdraft smoking caused by negative pressure
in the home.
Provides safety from dangerous carbon monoxide fumes.
The use of an Air-A-Lator® in your fireplace helps prevent
great amounts of air from being drawn out of your home. This
reduces oreliminates the chance of drawing carbon monoxide
fumes from household heating appliances — a growing problem as homes become more air-tight.
Less heat loss for more energy savings. Instead of drawing
heated air from inside your home, Air-A-Lator® takes outside
air and directs it right where it’s needed.
Reduces pollution, ashes and customer complaints. When
your fire burns more completely you’ll have much less ash and
smoke both in the air and in your home.
Aluminum Closable Louver and
Optional Round Adapter
Dimensions (WxH)
Order #
8”x8”Louver
260808
6” Round Adapter
270806
Note: Specify if you want adapter riveted
to louver. Includes Screen; 10 per case
Aluminum Brick Louver – Fixed
Dimensions (WxH)
Order #
2.25”x8”
260802
Type “AD” Air-A-Lator® for Existing
Fireplaces
Dimensions
Order #
18”x13.5”x2.75”
221418
Note:
Type “AD” is designed for any fireplace
with an ash dump and a clean-out door.
It simply slides into your fireplace over your
open ash pit doors and your ash dump provides passage for outside air.
156
Note: Includes Screen
Ash Dump Cover
Dimensions (WxH) Order #
4.5”x9”
9”x9”
6.5”x8”
244509
240909
246508

it`s not the stove, it`s

Transcription

Similar documents

CIRCULATING HEAD

cpr for the dead of night.

Fernco Flexible Coupling Installation - Fernco

Hymax Couplings 1.5

Data Sheet - Carlton

HEA TER TEMPLA TE PROP END

STRAINERS - Magnatrol Valve Corporation

ES-225 for Sewerage Assets™ A4

Pipemaster Flyer Front (no contact) 9_3_08

lfucg follows kytc lead and approves ads and hancor hdpe pipe for