SheetLeader™ Stacker Upgrade Packages

SHEETING UPGRADES
SheetLeader™ Stacker Upgrade Packages
The SheetLeader upgrades were developed to extend the life and enhance
productivity of existing SheetLeader Sheeters. Replaced with modern stateof-the-art technologies, bringing the equipment up to today’s capabilities and
standards.
Shingling and Accumulation Conveyor Upgrades From Tape Belts to Full
Width Heavy Duty Flat Belt
■■ Benefits:
- Reduced Maintenance Time and Material Cost
- Improved Shingling and Transporting of Light Weight Sheets
- Reduced Jam at Shingler and Stacker
Snubber Wheel Upgrade to Zero Crush Wheels With SoftNip Covering
■■ Benefits:
- Reduced Surface Marking at Higher Speeds
Removable Shingling Tape Belt Control Roller
■■ Benefits:
- For Improved Runnability of Light Weight, Long Sheets
“Smooth Roller” Stacker Infeed Drop-off with Continuous Sheet Front Stop
Design
■■ Benefits:
- Easy Placement of Kick-off Wheels at Stacker
- Infeed Reliable Non-Creasing Shingle Delivery
- Better Stack Quality on Light Weight Products
- Multi-Out, Narrow Width Sheet Set-up Capability
Hex Shaft Tamper Carriage Upgrade
■■ Benefits:
- Keeps Tamper Square for Reduced Set-up
- Time and Easier Tamper Blade Length Changes
- Allows Easy Tamper Positioning
Off-Set Skid Piling Capability
■■ Benefits:
- Allows Stack to be Centered on Plastic Pallets for Feeding Cross-Grain
Sheets Into Printing Press Note: May Limit Maximum Sheet Length Capacity
High Strength Cable, New Sheaves/Drums, and Heavy Duty Lift Table
Attachment Points
■■ Benefits:
- For Increasing Lift Capacity to 5,500 lbs. (2,500 kg)
1300 North Airport Rd. | Phillips, WI 54555 USA | +1 (715) 339-2191 | www.marquipwardunited.com | [email protected]
05/09 S LR