RegO® Regulators 2011

Transcription

®
RegO Regulators
n First Stage
n Compact Twin Stage
n Compact Second Stage
n Second Stage
n High Pressure Industrial
Industrial valves and regulators
with 10 years warranty
The expected service life
of a ECII/REGO® regulator (excluding single stage)
manufactured after 1995 is 25 years on condition
that all of our recommendations are followed.
2011
Instructions
www.rego-europe.de
Do You Care About
What’s In Your
Propane
Regulator?
WE DO.
And we know how
important it is to
select the highest
quality components
from suppliers you
know and trust.
Suppliers who are not
always the cheapest
but are always
the best.
Together with our
own high-end
production facilities
we are able to keep
supplying you the
best-built
LPG regulators.
We will provide
10 years warranty
on all REGO Products
(terms and conditions apply)
Page 2
Page 3
www.rego-europe.de
www.rego-europe.de
Instructions
Page 4
Instructions
Page 5
www.rego-europe.de
www.rego-europe.de
Instructions
Page 6
Instructions
Page 7
www.rego-europe.de
www.rego-europe.de
Instructions
Page 8
Instructions
Page 9
www.rego-europe.de
www.rego-europe.de
LV3403TR
www.rego-europe.de
RegO® Compact First Stage Regulators LV3403TR
www.rego-europe.de
LV3403VR
www.rego-europe.de
RegO® Compact First Stage Regulators LV3403VR
LV3403TR
LV3403VR
Application
Application
Ideal for use as a first stage regulator on any domestic
LPG installations requiring up to 32 kg/h per hour. The
regulator is factory set to reduce container pressure to
an intermediate pressure of approximately 0,7 bar.
LPG installations requiring up to 45 kg/h per hour.
The regulator is factory set to reduce container pressure
to an intermediate pressure of approximately 1,5 bar.
Features
Features
¢ Compact design can be connected to a service
valve using either a POL adapter or a RegO Products
pigtail.
¢ Large threaded 3/8” F.NPT bonnet vent can be easily piped-away underground installations without
the need of glue kits or extra adapters.
¢ Non adjustable.
¢ Large flow orifice resists freeze-ups due to water
concentration in LPG vapour
¢ Design provides for good flow regulation at both
high and low container pressures.
¢ Built in relief valve and travel stop comply with
NFPA 58 over pressure requirements.
¢ Incorporates 1/8” F.NPT downstream pressure tap
for an easy inline check of the regulator’s delivery
pressure.
¢ Moulded diaphragm provides an o-ring type seal
between the body and bonnet.
¢ Body and bonnet are assembled in the USA using
the unique, patented RegUlok seal system.
¢ Fully painted in brilliant red for complete corrosion
protection.
¢ Mounting bracket available as an accessory: part
number 2302-31.
pigtail.
¢ Non adjustable.
pressure.
protection.
¢ Mounting bracket available as an accessory: part
number 2302-31.
tor
NonEfrW
regula
g
n
i
z
ee
ns
N
io
condit
in all
Materials
Body
Zinc
Bonnet
Zinc
Spring
Steel
Seat Disc
Resilient Rubber
Diaphragm
Integrated Fabric and Synthetic Rubber
tor
NonEfrW
regula
g
n
i
z
e
e
ns
N
io
condit
in all
Materials
Body
Zinc
Bonnet
Zinc
Spring
Steel
Seat Disc
Resilient Rubber
Diaphragm
Ordering Information
Part Number
Inlet
Connection
Outlet
Orifice Size
Connection
Factory Delivery
Pressure
Bonnet Vent Position
Approximate
Vapour Capacity
LV3403TR
¼” F.NPT
½” F.NPT
6,3 mm
0,7 bar
Over Outlet
32 kg/h
LV3403TRV9
¼” F.NPT
½” F.NPT
6,3 mm
0,7 bar
Opposite Gauge port
LV3403UR
¼” F.NPT
½” F.NPT
6,3 mm
1 bar
Over Outlet
Part Number
Inlet
Connection
Outlet
Orifice Size
Connection
32 kg/h
LV3403VR
¼” F.NPT
½” F.NPT
40 kg/h
LV3403VR9
¼” F.NPT
½” F.NPT
Factory Delivery
Pressure
Approximate
Vapour Capacity
6,3 mm
1,5 bar
Over Outlet
45 kg/h
6,3 mm
1,5 bar
Opposite Gauge port
45 kg/h
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. But being
pressure equipment equal or below the limits in section 1.1, 1.2 and 1.3 of Article 3 are stated to be
designed and manufactured with the sound engineering practice of a Member State in order to ensure
safe use. LV3403TR series are UL approved.
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. But being
pressure equipment equal or below the limits in section 1.1, 1.2 and 1.3 of Article 3 are stated to be
designed and manufactured with the sound engineering practice of a Member State in order to ensure
safe use. LV3403VR series are UL approved.
REGO GmbH - Distribution Center Europe
Industriestrasse 9, D-35075 Gladenbach, Germany
Phone +49 (0)6462-9147-0, Fax -9147-29
[email protected] · www.rego-europe.de Page 10
Phone +49 (0)6462-9147-0, Fax -9147-29
[email protected] · www.rego-europe.de
Page 11
www.rego-europe.de
LV3403TRH (L) Series
www.rego-europe.de
RegO® Compact First Stage Regulators
LV3403TRH (L) Series with BSP Threads
www.rego-europe.de
PU/200
www.rego-europe.de
RegO® New 7525B34 Twin Stage
Automatic Changeover Regulator for LP-Gas
LV3403TRH (L) Series
Materials
7525B34
Body First Stage
Die Cast Zinc
Bonnet First Stage
Die Cast Zinc
Bonnet First Stage
Die Cast Zinc
Body Second Stage
Die Cast Zinc
Bonnet Second Stage
Die Cast Zinc
Application
Application
LPG installations requiring up to 45 kg/h per hour. The
regulator is factory set to reduce container pressure to
an intermediate pressure of approximately 0,45 or 1,5
bar.
This combination automatic change-over /two stage
regulator is suitable for homes, mobile homes, cottages, construction and other portable installations
utilizing two or more cylinders. Empty containers may
be replaced without interrupting customer’s gas service.
Features
Features
Diaphragms
Int. Fabric & Synthetic Rubber
pigtail.
¢ Non adjustable.
pressure.
protection.
¢ Automatic changeover switches from “service” to
“reserve” cylinder automatically without interrupting gas service.
¢ With 1 bar inlet pressure, the regulator is designed
to not pass more than 137 mbar downstream with
the seat disc removed.
¢ Incorporates a integral relief valve on second stage.
¢ Unique bonnet vent profile on second stage minimizes vent freeze over when properly installed.
¢ Compact design saves space allows for easy
installation.
¢ Allows “reserve” cylinder to supplement the flow of
gas from the “service” cylinder during extreme load
or severe cold conditions.
¢ Indicator gauge and changeover knob are integral
to the first stage.
¢ Second stage pressure tap plug can be removed
with a 3/16” hex Allen wrench.
Springs
Steel & Stainless Steel
Valve Discs
Resilient Rubber
tor
NonEfrW
regula
eezing ns
N
io
condit
in all
¢ Mounting bracket
available as an accessory: part number 2302-31.
Materials
Body
Zinc
Bonnet
Zinc
Spring
Steel
Seat Disc
Resilient Rubber
Diaphragm
Part Number
Inlet
Connection
Outlet
Orifice Size
Connection
Factory Delivery
Pressure
Approximate
Vapour Capacity
LV3403TRH
¼” F-BSP
½” F-BSP
6,3 mm
1,5 bar
Over Outlet
45 kg/h
LV3403TRHV9
¼” F-BSP
½” F-BSP
6,3 mm
1,5 bar
Opposite Gauge port
45 kg/h
LV3403TRL
¼” F-BSP
½” F-BSP
6,3 mm
0,45 bar
Over Outlet
45 kg/h
LV3403TRLV9
¼” F-BSP
½” F-BSP
6,3 mm
0,45 bar
Opposite Gauge port
45 kg/h
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. But being pressure equipment equal or
below the limits in section 1.1, 1.2 and 1.3 of Article 3 are stated to be designed and manufactured with the sound engineering
practice of a Member State in order to ensure safe use.
Phone +49 (0)6462-9147-0, Fax -9147-29
Part Number
Inlet
Connection
Outlet
Connection
Factory
Delivery
Pressure
Adjustment
Range 2nd
Stage
¼“ Inverted
28 mbar @ 6,8
½“ F.NPT
23-33 mbar
Flare
bar Inlet
* Maximum flow based on 0,7 bar Inlet 23 mbar delivery pressure
7525B34
Kit Number
Automatic Changeover Regulator
5726B34
7525B34
5727B34
7525B34
Inlet
Outlet
¼“ Inverted
Flare
½“ F.NPT
Pigtails
Included-2
912FA20
912FS20
Bonnet Vent
Position 2nd
Stage**
Approximate Vapour
Capacity*
Outlet
8,4 kg/h*
Bracket Included
Approximate
Vapour Capacity
Propane
2302-31
8,4 kg/h
Page 13
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
LV404B Series
www.rego-europe.de
RegO® LV404B Series Special Purpose
LP-Gas Compact Twin-Stage Regulators
www.rego-europe.de
PU/194
www.rego-europe.de
RegO® New Compact Twin Stage Regulators for
LP-Gas LV404B34 & LV404B39 Series
LV404B Series
Features
LV404B34 & LV404B39 Series
LV404B4
Application
Compact two-stage regulator is designed to reduce
container pressure up to 17.2 bar down to a pressure
between 28-87 millibar; the actual adjustable pressure
range is specified in the table below. Ideal for use on
smaller LPG installations.
Application
The compact twin-stage regulator is designed to reduce
container pressure down to 28 mbar. delivery pressure.
It is ideal for “on site” container applications such as
homes, mobile homes and cottages for average domestic service; including small ASME tanks and 100-420
pound DOT cylinders.
Materials
Materials
Body First Stage
Die Cast Zinc
Body First Stage
Die Cast Zinc
Body Second Stage Die Cast Zinc
Bonnet First Stage (LV404B34) Die Cast Zinc
Bonnets
Die Cast Zinc
Bonnet First Stage (LV404B39) Brass
Diaphragms
Int. Fabric & Synthetic Rubber
Body Second Stage
Die Cast Zinc
Springs
Steel
Bonnet Second Stage
Die Cast Zinc
Valve Discs
Resilient Rubber
Diaphragms
Int. Fabric & Synth. Rubber
Springs
Steel & Stainless Steel
Valve Discs
Resilient Rubber
¢ Large vent helps prevent vent blockage, the second
stage regulator bonnet is tapped for 3/8”F.NPT for
vent piping, the high pressure regulator is tapped
with 1/8” F.NPT for vent piping.
¢ With 1bar inlet pressure, the regulator is
designed to not pass more than 137 mbar downstream with the seat disc removed.
¢ Incorporates a integral relief valve on second stage.
¢ Unique bonnet vent profile minimizes vent freeze
over when properly installed.
¢ Compact design saves space allows for easy
installation – especially under container hoods with
collars
¢ Built in pressure taps 1/8” F.NPT on both high
pressure regulator inlet and downstream side of the
second stage regulator
¢ Plugs can be removed with a 3/16” hex
Allen wrench
¢ Select brown finish.
Part Number
LV404B4
LV404B46
LV404B9
LV404B96
LV404B4H20
LV404B46H20
Inlet
Outlet
Delivery
Connection Connection Pressure@
Inches
Inches
7 bar Inlet
¼” F-NPT
F.POL
¼“ F-NPT
½” F-NPT
¾” F-NPT
½” F-NPT
¾” F-NPT
½” F-NPT
¾” F-NPT
28 mbar
LV404B34
Adj. Range
mbar
28 - 33 mbar
1st Stage
2nd Stage
Down
Outlet
LV404B39
Approximate Vapour
Capacity
11 kg/h
28 mbar
28 - 33 mbar
Down
Outlet
11 kg/h
50 mbar
37 - 87 mbar
Down
Outlet
11 kg/h
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. But being pressure equipment
equal or below the limits in section 1.1, 1.2 and 1.3 of Article 3 are stated to be designed and manufactured with the
sound engineering practice of a Member State in order to ensure safe use. LV404B series are UL approved.
Phone +49 (0)6462-9147-0, Fax -9147-29
Part
Number
Inlet
Connection
LV404B34
¼“ F.NPT
LV404B39
F.POL
LV404B34V9
¼“ F.NPT
LV40439V9
F.POL
Outlet
Orifice
Connection Size
½“ F.NPT
6,3
mm
Factory Adjustment Bonnet Vent Bonnet Vent
Delivery Range 2nd Position 1st Position 2nd
Pressure
Stage
Stage**
Stage**
28 mbar
@ 6,8
bar Inlet
23 - 33
mbar
Rear
Approximate
Vapour
Capacity*
Outlet
9,4 kg/h
Left
9:00
* Maximum flow based on 0,7 bar Inlet 23 mbar delivery pressure | ** Other vent positions available upon request
Page 15
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
LV3403B4
www.rego-europe.de
RegO® Compact Second Stage Regulators
LV3403B4
RegO® Low Pressure Second Stage Regulators
LV4403B
NEW
Application
The LV3403B4 is designed to reduce first stage pressure
of 0.35 to 1.5 bar down to burner pressure normally 28
mbar. Designed as a second stage regulator for smaller
applications with flow requirements up to 9.6 kg/h,
they are ideal for homes, mobile homes, and cottages.
LV4403B Series
Application
Designed to reduce first stage pressure of 0,35 to 1,4
bar down to burner pressure, normally 28 mbar. Ideal
for medium commercial installations, multiple cylinder
installations and normal domestic loads.
Features
Backmount Design
¢ Large vent helps prevent vent blockage, it is tapped
for 3/8”F.NPT for vent piping.
¢ With 1.03 bar inlet pressure, the regulator is designed to not pass more than .14 bar downstream
with the seat disc removed.
¢ Incorporates a integral relief valve
¢ Compact design saves space.
¢ Built in pressure taps 1/8” F.NPT on both regulator
inlet and downstream side of the regulator. Plugs
can be removed with a 3/16” hex Allen wrench.
Mounts directly to house line piping. Eliminates need
for union joints, elbows, and mounting brackets. Quick
and easy to install.
Materials
101.35 mm
Die Cast Zinc
Bonnet
Die Cast Zinc
Nozzle Orifice
Brass
Spring
Steel
Diaphragm
Body & Bonnet Die Cast Zinc
Brass
Spring
Steel
Integrated Fabric & Synthetic Rubber
103.12 mm
Valve Seat Disc Resilient Rubber
Diaphragm
Body
Materials
Nozzle Orifice
www.rego-europe.de
LV4403B Series
www.rego-europe.de
101.47 mm
 Downstream Pressure Tap
 Inlet Pressure Tap 1/8“ F.NPT
Straight Through Design
Inlet
Outlet
Factory Delivery
Part Number
Orifice Size
Connection Connection
Pressure
Adjustment Bonnet Vent
Approximate
Range
Position
Vapour Capacity
LV3403B4
½” F.NPT
½” F.NPT
6,3 mm
28 mbar
23 - 33 mbar
Inlet
9,6 kg/h
LV3403B4V3
½” F.NPT
½” F.NPT
6,3 mm
28 mbar
23 - 33 mbar
3 o‘clock
9,6 kg/h
LV3403B4V0
½” F.NPT
½” F.NPT
6,3 mm
28 mbar
23 - 33 mbar
Outlet
9,6 kg/h
LV3403B4V9
½” F.NPT
½” F.NPT
6,3 mm
28 mbar
23 - 33 mbar
9 o‘clock
9,6 kg/h
sound engineering practice of a Member State in order to ensure safe use. LV3403B series are UL approved.
Phone +49 (0)6462-9147-0, Fax -9147-29
Part Number
Inlet
Connection
Outlet
Connection
Orifice
Size
Factory Delivery
Pressure
Adjustment
Range
Bonnet Vent
Position
Approximate
Capacity**
LV4403B4
½“ F. NPT
½“ F. NPT
3,5 mm
28 mbar
23 – 33 mbar
Over Inlet
20 kg/h
LV4403B46
½” F. NPT
¾“ F. NPT
3,5 mm
28 mbar
23 – 33 mbar
Over Inlet
20 kg/h
LV4403B46R*
½“ F. NPT
¾“ F. NPT
3,5 mm
28 mbar
23 – 33 mbar
Over Inlet
20 kg/h
LV4403B66
¾“ F. NPT
¾“ F. NPT
3,5mm
28 mbar
23 – 33 mbar
Over Inlet
20 kg/h
LV4403B66R*
¾“ F. NPT
¾“ F. NPT
3,5 mm
28 mbar
23 – 33 mbar
Over Inlet
20 kg/h
* Backmount design.
** Maximum flow based on 0,7 bar inlet and 23 mbar delivery pressure.
sound engineering practice of a Member State in order to ensure safe use. LV4403B Series are UL approved.
Page 17
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
LV4403H Series
www.rego-europe.de
LV4403H Series
www.rego-europe.de
LV4403K46 Series
www.rego-europe.de
LV4403K46 Series
Application
Application
Designed to reduce first stage pressure of 0.35 to 1.5
bar down to burner pressure, normally 36 mbar.
Ideal for medium commercial installations, multiple
cylinder installations and normal domestic loads.
Designed to reduce first stage pressure 0.35 to 1.5
bar down to appliance pressure nominal 29 mbar, the
adjustment range is specified in the table below. Ideal
for medium commercial installations, multiple cylinder
installations and normal domestic loads.
Features
¢ Large vent helps prevent blockage and has ¾”
F.NPT for vent piping.
¢ With 1 bar inlet pressure, regulator is designed to
not pass more then 138 mbar with the seat disc
removed.
¢ Incorporates integral relief valve
¢ Replaceable valve orifice and valve seat disc.
¢ Large moulded diaphragm is extra sensitive to pressure changes.
¢ Built in pressure tap has plugged 1/8’’ F.NPT outlet. Plug can be removed with a 3/16” hex allen
wrench.
¢ Length of the Regulator 18 cm
¢ Height of the Regulator 11,8 cm
¢ Length between the bracket screws 11,4 cm
Materials
Materials
Body
Die Cast Zinc
Bonnet
Die Cast Zinc
Nozzle Orifice
Brass
Spring
Steel
Body
Die Cast Zinc
Bonnet
Die Cast Zinc
Diaphragm
Nozzle Orifice
Brass
Spring
Steel
Diaphragm
Part Number
Inlet
Outlet
Orifice
Size
Factory Delivery
Pressure
@ 0.7 bar inlet
Adjustment
Range
Bonnet Vent
Position
Approximat
Capacity
LV4403H222
¼“ F.NPT
½” F.NPT
3,5 mm
50mbar
37 – 87 mbar
Over inlet
14 kg/h
LV4403H414
½” F.NPT
½“ F.NPT
3,5 mm
36mbar
31 – 47 mbar
Over inlet
14 kg/h
LV4403H420
½“ F.NPT
½” F.NPT
3,5 mm
50mbar
37 – 87 mbar
Over inlet
14 kg/h
LV4403H4614
½” F.NPT
¾“ F.NPT
3,5 mm
36mbar
31 – 47 mbar
Over inlet
14 kg/h
LV4403H4620
½” F.NPT
¾“ F.NPT
3,5 mm
50mbar
37 – 87 mbar
Over inlet
14 kg/h
LV4403H6614
¾” F.NPT
¾“ F.NPT
3,5 mm
36mbar
31 – 47 mbar
Over inlet
14 kg/h
Part Number
Inlet
Connection
Outlet
Connection
Orifice
Size
Factory Delivery
Pressure
Adjustment
Range
Bonnet Vent
Position
Approximate
Capacity
LV4403K46
½“ F. BSP
¾“ F-BSP
3,5 mm
30 mbar
27 – 37 mbar
Outlet
17 kg/h
LV4403K46V9
½” F. BSP
¾“ F-BSP
3,5 mm
30 mbar
27 – 37 mbar
9 o‘clock
17 kg/h
sound engineering practice of a Member State in order to ensure safe use. LV4403H Series are UL approved.
Phone +49 (0)6462-9147-0, Fax -9147-29
Page 19
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
LV5503B Series
www.rego-europe.de
LV5503B Series
www.rego-europe.de
LV5503H Series
www.rego-europe.de
LV5503H Series
Application
Application
Ideal for larger commercial and industrial applications.
Designed to reduce first stage pressure 5-20 PSIG
(.035- 1.4 bar) down to a pressure higher than 11”
W.C (28 mbar), the actual pressure setting is specified in the table below. Ideal for medium commercial
installations, multiple cylinder installations and normal
domestic loads.
Materials
Materials
Body
Die Cast Zinc
Bonnet
Die Cast Zinc
Nozzle Orifice
Brass
Spring
Steel
Die Cast Zinc
Bonnet
Die Cast Zinc
Nozzle Orifice
Brass
Spring
Steel
Diaphragm
Diaphragm
Body
Part Number
Inlet
Outlet
Part Number
Inlet
connection
Outtlet
Connection
Orifice
Size
Factory Delivery
Pressure
@ 0,7 bar Inlet
Adjustment
Range
Bonnet Vent
Position
Approximate
Capacity
LV5503H414
½“ F. NPT
¾“ F. NPT
6,3 mm
35 mbar
18 – 40 mbar
Over Inlet
35 kg/h
LV5503H614
¾“ F. NPT
¾“ F. NPT
6,3 mm
40 mbar
18 – 40 mbar
Over Inlet
35 kg/h
LV5503H620
¾“ F. NPT
¾“ F. NPT
6,3 mm
50 mbar
28 – 70 mbar
Over Inlet
35 kg/h
LV5503H620V
¾“ F. NPT
¾“ F. NPT
6,3 mm
50 mbar
28 – 70 mbar
Over Outlet
35 kg/h
Orifice
Size
Factory Delivery
Pressure
Adjustment
Range
Bonnet Vent
Position
Approximate
Capacity
LV5503H640
¾“ F. NPT
¾“ F. NPT
6,3 mm
100 mbar
70 – 210 mbar
Over Inlet
35 kg/h
LV5503H640V
¾“ F. NPT
¾“ F. NPT
6,3 mm
100 mbar
70 – 210 mbar
Over Outlet
35 kg/h
LV5503B4
½“ F. NPT
¾ “ F. NPT
6,3 mm
28 mbar
23 – 33 mbar
Over Inlet
35 kg/h
LV5503H814
¾“ F. NPT
1“ F. NPT
7 mm
35 mbar
18 – 40 mbar
Over Inlet
50 kg/h
LV5503B6
¾“ F. NPT
¾“ F. NPT
6,3 mm
28 mbar
23 – 33 mbar
Over Inlet
35 kg/h
LV5503H820
¾“ F. NPT
1“ F. NPT
7 mm
50 mbar
28 – 70 mbar
Over Inlet
50 kg/h
LV5503B8
¾“ F. NPT
1“ F. NPT
7 mm
28 mbar
23 – 33 mbar
Over Inlet
50 kg/h
LV5503H840
¾“ F. NPT
1“ F. NPT
7 mm
100 mbar
70 – 210 mbar
Over Inlet
50 kg/h
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. LV5503 series being pressure
equipment equal or below the limits in section 1.1, 1.2 and 1.3 of Article 3 are stated to be designed and manufactured
with the sound engineering practice of a Member State in order to ensure safe use, and are therefore not marked CE.
LV5503B Series are UL approved.
Phone +49 (0)6462-9147-0, Fax -9147-29
sound engineering practice of a Member State in order to ensure safe use. LV5503H Series are UL approved.
Page 21
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
LV6503B Series
www.rego-europe.de
RegO® Large Capacity Second Stage Regulators
LV6503B Series
LV6503B Series
www.rego-europe.de
597 Series
www.rego-europe.de
RegO® High Pressure Industrial Regulators
597 Series
597 Series
Application
Application
Ideal for larger commercial and industrial applications.
Designed to reduce LP-Gas container pressure down to
between 0.1 bar and 7,0 bar. Ideal for liquid or vapour
service, they can be used in a variety of applications
including salamander heaters, weed burning torches,
fish cookers, tar pot heaters, and other industrial type
services.
Features
¢ Tee style inlet and outlet connections - made from
ductile iron
¢ Incorporate integral large 2“ F.NPT relief vents
¢ Built in pressure taps for both inlet and outlet
pressure
¢ Full capacity relief at 10 psig inlet will keep the
down stream preessure at less than 2 PSIG
per NFPA 58
Are in accordance with the requirements of
Directive 97/23/EC for pressure equipment.
But being pressure equipment equal or below
the limits in section 1.1, 1.2 and 1.3 of Article 3 are
stated to be designed and manufactured with the sound
engineering practice of a Member State in order to
ensure safe use. 597 series are UL approved
Materials
Inlet Body
Ductile Iron
Body
Bonnet
Materials
Body
Zinc
Cast Aluminium
Bonnet
Zinc
Cast Aluminium
Springs
Steel
Valve Seat Discs Resilient Rubber
Diaphragm
Adjusting Screw Brass
Part Number
Inlet
Connection
Outlet
Connection
Orifice
Size
Factory Delivery Pressure
Adjustment
Range
Bonnet Vent
Position
Approximate
Capacity
LV6503B14
1 ½ “ F. NPT
1 ½ “ F. NPT
16 mm
28 mbar
21 – 35 mbar
-
170 kg/h
LV6503B16
2“ F. NPT
2“ F. NPT
16 mm
28 mbar
21 – 35 mbar
-
205 kg/h
Part Number
Adjustment
Method
Inlet
Connection
Outlet
Connection
Recommended
Delivery Pressure
range in bar
Capacity Determined at Set
pressure of bar *
Approximate
Capacity
Propane **
597FA
Tee Handle
¼“ F.NPT
¼“ F.NPT
0,1 – 1,0
0,7
37 kg/h
597FB
Tee Handle
¼“ F.NPT
¼“ F.NPT
0,7 – 2,0
1,4
63 kg/h
597FC
Tee Handle
¼“ F.NPT
¼“ F.NPT
1,4 – 3,0
2,0
73 kg/h
597FD
Tee Handle
¼“ F.NPT
¼“ F.NPT
2,8 – 7,0
2,8
94 kg/h
Are in accordance with the requirements of Directive 97/23/EC for pressure equipment. LV6503B Series are CE marked.
LV6503B Series are UL approved.
Different springs for different settings available.
Phone +49 (0)6462-9147-0, Fax -9147-29
*
**
Set pressure established at 7,0 bar inlet and a flow of 5,0 kg/h
Capacity determined at actual delivery pressure 20% less than set pressure with inlet pressure 1,4 bar higher than the set pressure
Page 23
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
1580 Series
www.rego-europe.de
High Pressure Industrial / Commercial Regulators
1580 Series
Application
www.rego-europe.de
X1584V, X1586V,
X1588V Series
www.rego-europe.de
RegO® High Pressure/High Temperature
Industrial/Commercial Regulators
X1584V, X1586V, X1588V Series
Designed to reduce LP-Gas and anhydrous ammonia
container pressure to between 0,2 and 8,6 bar. Precision-built with capacities of several hundreds kilogram
LP-Gas per hour. The 1580V series is perfect for such
big, tough jobs as crop dryers, asphalt batch mixing
plants, road building „tar wagons“, heat treating and
other large industrial and commercial loads. It’s also
ideal as first stage regulator in large multiple operations. The AA1580 series is ideal for use in anhydrous
ammonia applications. such as blue print machines and
heat treating.
Application
Designed to reduce LP-Gas container pressures between
0,2 and 8,6 bar. Ideal for crop drying, heat treating,
asphalt batch mixing and other large industrial and
commercial load applications such as vaporizers that
utilize high temperature LP-Gas or high temperature
atmosphere under conditions up to 148,8°C. Also ideal
as a first stage regulator in large multiple operations.
Part
Number
Service
Adjustment
Method
Inlet &
Recommended
Capacity
Width Height
Outlet
Delivery Pressure
Determined at
(A)
(B,max)
Connection
Range
Set Pressure*
AA1582MW
NH³
T-Handle
¼" F.NPT
0,2 - 1,7 bar
56 mm
105 mm
1,4 bar
60 m³/h NH³
AA1582MK
NH³
Hex Head
¼" F.NPT
0,2 - 1,7 bar
56 mm
105 mm
1,4 bar
60 m³/h NH³
AA1582ML
NH³
T-Handle
¼" F.NPT
1,4 - 3,5 bar
56 mm
105mm
2,1 bar
68 m³/h NH³
AA1582MH
NH³
T-Handle
¼" F.NPT
3,1 - 8,6 bar
56 mm
105 mm
4,1 bar
74 m³/h NH³
1584VN
LP-Gas
T-Handle
½" F.NPT
0,2 - 2,1 bar
75 mm
124 mm
1,4 bar
1584VL
LP-Gas
T-Handle
½" F.NPT
1,7 - 3,5 bar
75mm
124 mm
1584VH
LP-Gas
T-Handle
½" F.NPT
3,1 - 8,6 bar
75 mm
AA1584VW
NH³
T-Handle
½" F.NPT
0,2 - 1,7 bar
AA1584VL
NH³
T-Handle
½" F.NPT
AA1584VH
NH³
T-Handle
1586VN
LP-Gas
1586VL
Capacity**
Are in accordance with the requirements of
Directive 97/23/EC for pressure equipment.
But being pressure equipment equal or below
the limits in section 1.1, 1.2 and 1.3 of Article 3 are
stated to be designed and manufactured with the sound
engineering practice of a Member State in order to
ensure safe use. 1580V series are UL approved.
Materials
Body
Zinc
147 kg/h Propane
Bonnet
Zinc
2,1 bar
158 kg/h Propane
Springs
Steel
124 mm
4,1 bar
168 kg/h Propane
Valve Seat Discs Resilient Rubber
75 mm
124 mm
1,4 bar
127 m³/h NH³
1,4 - 3,5 bar
75 mm
124 mm
2,1 bar
136 m³/h NH³
½" F.NPT
3,1 - 8,6 bar
75 mm
124 mm
4,1 bar
144 m³/h NH³
T-Handle
¾" F.NPT
0,2 - 2,1 bar
89 mm
178 mm
1,4 bar
230 kg/h Propane
LP-Gas
T-Handle
¾" F.NPT
1,7 - 3,5 bar
89 mm
178 mm
2,1 bar
250 kg/h Propane
1586VH
LP-Gas
T-Handle
¾" F.NPT
3,1 - 8,6 bar
89 mm
178 mm
4,1 bar
295 kg/h Propane
AA1586VW
NH³
T-Handle
¾" F.NPT
0,2 - 1,7 bar
89 mm
178 mm
1,4 bar
198 m³/h NH³
AA1586VL
NH³
T-Handle
¾" F.NPT
1,4 - 3,5 bar
89 mm
178 mm
2,1 bar
218 m³/h NH³
AA1586VH
NH³
T-Handle
¾" F.NPT
3,1 - 8,6 bar
89 mm
178 mm
4,1 bar
252 m³/h NH³
1588VN
LP-Gas
T-Handle
1 " F.NPT
0,2 - 2,1 bar
89 mm
178 mm
1,4 bar
230 kg/h Propane
1588VL
LP-Gas
T-Handle
1 " F.NPT
1,7 - 3,5 bar
89 mm
178 mm
2,1 bar
250 kg/h Propane
1588VH
LP-Gas
T-Handle
1 " F.NPT
3,1 - 8,6 bar
89 mm
178 mm
4,1 bar
295 kg/h Propane
*
Set pressure is established with 7 bar inlet pressure and a flow of 10,5 kg propane / hour for 1580V series, 2,5 m³/h for AA1582M Series and 5 m³/h for AA1584V and
AA1586V Series
** Capacities determined at actual delivery pressure 20% less than set pressure with inlet pressure 1,4 bar higher then set pressure.
NOTE: Care must be taken to prevent re-liquification of propane at normal temperatures by heat tracing or other effective means.
Use a relief valve upstream or down stream of these regulators is recommended in accordance with NFPA 58
sound engineering practice of a Member State in order to ensure safe use. 1580M series are UL approved.
Phone +49 (0)6462-9147-0, Fax -9147-29
Inlet screen
protects seal
from foreign
material.
It is easily
removed for
cleaning.
Diaphragm
or
egulat
R
®
O
g
ser
The Re
vapori
r
o
f
y
all
especi
ations
install
Adjusting Screw Brass
Part
Number
Service
Adjustment
Method
Inlet &
Outlet
Connection
Recommended
Delivery Pressure
range in bar
X1584VN
LP-Gas
T-Handle
½“ F.NPT
0,2 – 2,1
X1584VL
LP-Gas
T-Handle
½“ F.NPT
1,7 – 3,5
X1586VN
LP-Gas
T-Handle
¾“ F.NPT
0,2 – 2,1
X1586VL
LP-Gas
T-Handle
¾“ F.NPT
1,7 – 3,5
X1588VN
LP-Gas
T-Handle
1“ F.NPT
0,2 – 2,1
X1588VL
LP-Gas
T-Handle
1“ F.NPT
1,7 – 3,5
Width
(A)
75 mm
89 mm
89 mm
Height
(B, max)
124 mm
178 mm
178 mm
Capacity Determined at Set
pressure in bar *
Capacity
kg/h
Propane**
1,4
147
2,1
158
1,4
230
2,1
250
1,4
230
2,1
250
*
Set pressure is established with 7 bar inlet pressure and a flow of 10,5 kg propane / hour for X1580V series.
** Capacities determined at actual delivery pressure 20% less than set pressure with inlet pressure 1,4 bar higher then set pressure.
NOTE: Care must be taken to prevent re-liquification of propane at normal temperatures by heat tracing or other effective means. Use a relief valve upstream
or down stream of these regulators is recommended in accordance with NFPA 58
Page 25
Phone +49 (0)6462-9147-0, Fax -9147-29
www.rego-europe.de
www.rego-europe.de
LV4403F66RA Series
www.rego-europe.de
RegO® Low Pressure Service Regulators for Natural Gas
High performance
and security
in extreme
conditions
LV4403F66RA Series
Application
Designed to reduce inlet pressure of from 1-3 bar to a
delivery pressure of 17.4 mbar.
Features
19.0
3.0 bar
2.5 bar
2.0 bar
1.5 bar
1 bar
17.0
Set point 1.5 bar
inlet
@ 17.4 mbar
delivery pressure
16.0
15.0
Materials
Body
Die Cast Zinc
14.0
Bonnet
Die Cast Zinc
13.0
Nozzle Orifice
Brass
Spring
Steel
This is what USA made
RegO® regulators
give their users
LV4403F66RA Series
18.0
mbar
¢ 90 degree right angle inlet to outlet connection for
standard meter installations
¢ Large vent helps prevent blockage and has a ¾”
F.NPT for vent piping.
¢ Straight-line valve closure reduces wear on seat
disc.
¢ Large molded diaphragm is extra sensitive to pressure changes.
¢ Built in pressure tap has plugged 1/8” outlet. Plug
can be removed with a 3/16” Allen wrench.
¢ Select Brown Finish
1.5
2.9
4.7
8.8
14.6
21.2
39.5
Cubic Meters/Hr
55.5 Natural Gas
Valve Seat Disc Integrated Fabric & Synthetic Rubber
Part Number
Inlet
Outlet
Orifice
Size
Factory Delivery
Pressure mbar
Adjustment
Range mbar
Bonnet Vent
Position
Vapour Capacity
m³/h
Natural Gas
LV4403F66RA
¾“ F.NPT
¾” F.NPT
3/16“
17.4
15 – 22.4
Over inlet
30.5
LV4403F66RAB
¾” F.NPT
¾“ F.NPT
3/16“
17.4
15 – 22.4
Over inlet
30.5
LV4403F66RA9
¾“ F.NPT
¾” F.NPT
3/16“
17.4
15 – 22.4
9:00
30.5
25 years of expected
service life of a ECII/
RegO® regulator
(excluding single stage)
on condition that all of our
recommendations are followed
10 years warranty
on all RegO® products
(terms and conditions apply)
RegO® products are
PED approved
Phone +49 (0)6462-9147-0, Fax -9147-29
Page 27
RegO® Compact
First Stage
Regulators
LV3403 Series
For any domestic
LPG installations
requiring up to
32/45 kg/h.
RegO® High Pressure Industrial/
Commercial
Regulators
1580 Series
Designed to reduce LP-Gas and anhydrous ammonia
container pressure
to between 0,2
and 8,6 bar.
Non freezing
regulator in all
conditions
Pressure gauge
available as an
accessory
RegO® Special
Purpose LP-Gas
Compact TwinStage Regulator
LV404 Series
Designed to
reduce container
pressure up to
17,2 bar down to
burner pressure
RegO® Low Pressure
Second Stage
Regulator
LV4403/LV5503
Series
Designed to reduce
first stage pressure
of 0,35 to 1,5 bar
down to burner
pressure
www.rego-europe.de
LPGas Products of excellence
from the world‘s
leading manufacturer
B
Our products are
CE or B marked
as conforming to:
¢ PED Pressure Equipment
Directive 97/23/EC
¢ TPED Transportable Pressure
Equipment Directive 1999/36/EC
ISO 9001 Certified
REGO GmbH is certified
according to ISO 9001 by
TÜV Germany.
Phone +49 (0)6462-9147-0, Fax -9147-29
Page 28
05-2011
All made
with pride in USA

RegO® Regulators 2011

Transcription

Similar documents

SHUTTLE VALVE “SHV”

E Series Heatless Regenerative Air Dryer

Pneumatic Isolation Valves

10 Series - United Electric Controls

Differential Pressure Transmitter Model DPT-10

SERIES - Marsal Pizza Ovens