160215 checklist

HIGH PRESSURE TRUE AEROPONICS PARTS LIST
By aeroponicsDIY.com
Below is a list of parts and items you need to build a reliable true high pressure
aeroponics system. You can locate most of these things at your local hardware store.
1
Yellow Standard Wire Nuts 25pk
2
Burial sprinkler wire 18/5 50’
3
Xtreme 120-quart Cooler
4
Large plastic tub
5
3-gallon black bucket
6
Pipe Schedule 40 2.5 in and 2 in
7
Food Grade FDA Chaulking
8
John Guest Quick Connect
90° Degree Elbow 1/4"
9
30' High Pressure Poly 1/4"
NSF Tubing
10
10 Mesh Pot Net Basket
+ Clone Cloning Collar Foam Insert
11
100% Cotton Cheesecloth
12
John Guest Quick Connect Union
Tee 1/4" Connector
13
1/4" 24VAC Electric Solenoid Valve
with Push-In Connectors
14
12V 2A Power Supply AC with
DC Female Connector
15
The Pump assembly includes:
- Pump: Aquatec 8800 series pump
- Reducer fitting: two reducer fitting 3/8" to
1/4", the pump has input/output of 3/8"
- Transformer: Aquatec brand transformer,
115VAC to 24VAC, 2 Amp.
- Pressure switch: 100psi to make the pump
and RO system function automatically.
- Solenoid valve: turn it off, and turn on
water when it is making water.
- Pressure gauge: to indicate pump output
pressure
16
Pressure Tank 2 Gallon
17
Inline Ball Valve
18
High Pressure Aeroponic Filter 1/4″
19
1/4″ Quick Connect Bioplastic
Y-Adapters NSF
20
1/4" Quick Connect Bulkhead
Unions
21
Angled Aeroponic Misting Nozzles
22
Interval Timer
23
APC Back-UPS ES 8 Outlet
550VA 120V
24
Drip 1/2" Barbed Elbows
25
Drip Irrigation 1/2" Barbed Tee
for Poly Tubing
26
1/2" tubing pre-cut
27
1/16" Hex Key L-Wrench Allen
for pump
28
1/2” Pipe insulation
29
Ball Valve to 1/4 OD tubing,
for use with pressure storage tank
Patent Pending
Please note: This parts list will be updated and revised as system improvements are
made. A complete parts description and parts source is also available at
aeroponicsDIY.com