Large pneumatic ship unloaders

Kovako Large Shipunload#Final
01/04/03
12:02
Side 1
Large pneumatic ship unloaders
• Ship sizes from 9,000
to 40,000 DWT
• Unloading capacity up
to 600 tph
• Pneumatic unloading direct
to storage
• Stationary or mobile units
• Diesel or electrically driven
Kovako Large Shipunload#Final
01/04/03
12:02
Side 2
Pneumatic unloading: Total flexibility
The pneumatic ship unloader only requires a pipeline
connection to handle the entire conveying process from
ship to store. This enables it to work in practically any
type of dock environment. The pipeline may run below,
at or above ground level. The unloader also functions
with removable pipeline sections.
The large pneumatic unloader can reach the entire ship’s
hold without repositioning. This unique feature allows
dock-mobile, barge-mounted and rail-mounted configurations, all offering a very high average through-the-ship
capacity. The easily manoeuvrable vacuum suction arm
combines high efficiency with superior environmental
characteristics.
Vacuum unloading provides
excellent cleaning capability.
2
Kovako Large Shipunload#Final
01/04/03
12:02
Side 3
3
Kovako Large Shipunload#Final
01/04/03
12:02
Side 4
Sized to fit
180 TPH
Pneumatic unloaders are available in
various capacity ranges depending on
the size of the terminal in question. The
180 tph Kovako Road-Mobile Unloader
is an excellent solution for small vessels.
300 TPH
For medium sized terminals the 300 tph
pneumatic unloader offers a competitive
solution for rail-mounted, dock-mobile
or barge-mounted configurations.
425 TPH
Terminals with a high throughput require
a high capacity shipunloader. The 425
tph pneumatic unloader caters for this
need and various configurations are
available.
600 TPH
The top of the line pneumatic unloader
has a throughput of 600 tph. To make
optimum use of this large unloader,
the railmounted version is the preferred
solution.
4
Kovako Large Shipunload#Final
01/04/03
12:02
Side 5
The unloading process
The highly manoeuvrable vacuum arm can access
any part of the hold without repositioning the
unloader. The cargo can be unloaded in a level way
without creating dust emission.
1
Using a remote control unit, the operator directs
the movements of the suction arm.
2
The material is mixed with air at the suction
nozzle and vacuumed into the suction pipeline.
3
The 360 degrees rotation of the 3rd arm section
enables it to reach into all corners of the hold.
4
The mixture of material and air is vacuumed
through the suction air pipeline to the filter tank.
5
Air and material are separated inside the filter
tank. The material then drops down into one of
the two transfer tanks.
6
The transfer tanks alternate between being filled
with material and being blown empty.
7
The air used for the vacuum conveying process is
cleaned by high efficiency filters in the filter tank.
8
The vacuum pumps that provide the air for the
vacuum conveying process are located in a
machine room on the unloader.
9
The compressors for the conveying process are
located in a machine room on the unloader or
on the quay as shown.
10
The compressed air passes via a pipeline and a
rubber hose connection to the ship unloader.
11
The compressed air is mixed with the material in
the transfer tank.
12
The material is conveyed to the storage through
the rubber hose connection and the pipeline on
shore.
13
The whole unloading process is fully automatic
and interfaced with the control system of the
storage facility.
3
2
1
A lightweight
radio or cableconnected remote
control enables
the operator to
choose a position
that provides an
ideal view of the
suction nozzle.
Kovako Large Shipunload#Final
01/04/03
12:03
4
Side 6
7
5
11
13
6
9
8
12
10
The stinger section
rotates 360
degrees, enabling
the unloader to
reach into all
corners, behind
web frames, etc.
The rotary
nozzle fluidises
the cement
to facilitate
unloading.
Kovako Large Shipunload#Final
01/04/03
12:03
Side 7
Made to match
Rail-mounted unloaders
Large pneumatic unloaders come in various configurations
to match specific unloading situations. A rail-mounted
unloader moves easily and quickly alongside the ship,
allowing a high through-the-ship unloading rate.
Dock-mobile unloaders
In cases where there are no rails available or the
unloader cannot be located permanently on the
quay, a dock-mobile unloader is an excellent
solution. Dock-mobile unloaders are either selfpropelled or pulled by a front-end loader.
Barge-mounted unloaders
In cases where no suitable dock facilities are
available or the unloader is to be used at several
terminals, a barge-mounted pneumatic unloader
is the ideal solution. Complete accessibility of the
entire hold without repositioning the barge and
an easy rubber hose onshore connection are
significant advantages offered by this type of
unloader.
Kovako Large Shipunload#Final
01/04/03
12:03
Side 8
Designed for your application
Ship to barge transfer
Direct ship to truck loading
8
Kovako Large Shipunload#Final
01/04/03
12:03
Side 9
Floating terminals
Dock-mobile support system for large
pneumatic unloader:
– hydraulic stabilisers distribute the
equipment load directly onto the quay.
– hydraulic propulsion and steering allow
easy movement of the unloader.
The versatile concept of the
pneumatic ship unloader
coupled with the experience
and capability of Kovako
Materials Handling offers the
end user a wide range of
applications and solutions.
9
Kovako Large Shipunload#Final
01/04/03
12:01
Side 10
www.flsmh.com
Up-to-date addresses of F.L.Smidth Materials Handling
Group companies and sales offices are available from
our website. Our brochures can also be downloaded as
pdf-files from the website.
P.O.Box 2 • 2396 ZG Koudekerk aan den Rijn
The Netherlands
Tel: +31 (0)71 341 73 33
Fax: +31 (0)71 341 58 51
E-mail: [email protected]
Website: www.kovako.com