engineered products group - Machine Accessories Corporation

Transcription

engineered products group - Machine Accessories Corporation
C-Rail, I-Beam and Diamond Rail Festoon Systems
Festoons are the ideal solution for supplying power to moving equipment when there is sufficient vertical space to allow for looping
of the cables and hoses. Models to handle wide range of loads and speeds. Typical trolleys pictured below.
ENGINEERED
PRODUCTS GROUP
Diamond Rail
Festoon Systems
Track • Master
Festoon Systems
Available in three sizes with either
clips for round cables/hoses, cable
clamps for flat cables, or specially
designed clamps for holding a mixed
load of hoses, round cables and flat
cables. Maximum loads to 125 lbs
per trolley.
Beam • Master
Festoon Systems
Wide variety of trolley sizes and configurations
designed for speeds to 650 fpm with loads to 1300
lbs. per trolley. Widely used on container cranes,
machine tools, material handling equipment,
steel mill cranes, etc.
Unique heavy duty festoon system
follows your machinery or conveyor
line, even around curves. Supplies
electric power or compressed air
where needed, when needed. Curved
rail sections available with 36" to 340"
radii. Straight sections also available.
Maximum load 50 lbs. per trolley.
• Spring & Motor Powered Cable and Hose Reels
• C-Rail and I-Beam Festoon Systems
• Steel and Nylon Cable Carriers
• Slip Rings
Gleason Reel Corp.
600 South Clark St. • P.O. Box 26
Mayville, WI 53050
Phone: 920-387-4120 • Fax: 920-387-4189
www.gleasonreel.com
02/25/08
For more information go to www.gleasonreel.com or Gleason Product CD
Eng4pg1203.d
Properly Manage Cables and Hoses in Your Workplace.
Gleason Reel Engineered Products Group Has What You Need.
There are three methods of managing cables and hoses in the workplace…spooling on reels, hanging from festoons or encasing in
carriers. The Gleason Engineered Products Group features all three types; custom assembled spring and motor reels, cable carriers
and festoon systems in an astounding range of sizes and capacities. Whether you are protecting low-voltage leads and ink tubes in
a wide format printer or trying to control hundreds of feet of 3" cable on an off-shore drilling rig, the Engineered Products Group
can design and manufacture the very best solution to your needs. With experience dating back to 1911, the name Gleason Reel is
synonymous with Effective, Efficient Cable and Hose Management.
PowerTrak™ Cable Carriers
Cable carriers organize and protect cords, cables, tubes and hoses on reciprocating machines. Available in four styles in an extremely
wide range of sizes, Gleason cable carriers are custom assembled with steel or molded nylon side chains. One piece molded nylon
links are also available.
Series L, E and EF
Steel PowerTrak
Cable Carriers
Hose & Cable Reels
Whether your application calls for the heavy-duty
Series E or the mill-duty and super duty Series
EF capable of handling “oversized” cables and
hoses on off-shore drilling rigs, there is a Gleason
steel cable carrier for you. Roller supports and
guide trays are also available for extended travel.
Cable-Master Cable Reels
Versatility makes this one of the most widely
used cable reels in the world. Automatic spring
rewind for hand pull or machine mounting. May
be mounted base up, down or to wall for vertical
or horizontal hose travel. Spool diameters of 14",
16" or 19", handles up to 70' of cable with as many
as 12 conductors. (As with all cable reels, actual
maximum capacity varies with cable type and size
and type of application.)
Hose Reels
Hand pull or machine mount connecting machines
to air/water supply. Gleason can supply hose reels
in several duty ranges. There is also one series
specifically designed for dual hydraulic hose control.
Series GRP PowerTrak
Non-metallic
Cable Carriers
Series G PowerTrak
Cable Carriers
Featuring molded fiberglass reinforced
side chains separated by steel rods,
extruded aluminum bars or custom
milled aluminum bars, the series G
PowerTrak cable carrier offers the
utmost in versatility. Can be installed
to operate vertically or horizontally
and will also operate “on edge”.
One piece molded fiberglass reinforced
links are lightweight and corrosion
resistant. Links easily snap together
to customize length. Some models flip
open to allow easy cable installation.
Also available in fully enclosed version.
Series S Reels
Designed primarily for machine mounting,
Series S is slightly heavier and available in
larger sizes than the Cable-Master (above).
Spool diameters to 32" will handle up to 200'
cable with 2 to 36 conductors.
Series MMD and SM Mill Duty Reels
The heavy duty Series MMD and even more rugged SM are
spring powered and specially designed for continuous steel
mill and magnet service. Everything about these reels says
“long life, even under the most adverse conditions”.
Typical Cable Carrier Application
Slip Rings for Rotational Movement
Series SHO and TMR Reels
Spring powered SHO reels (right) and motor
powered TMR reels are designed for extraheavy duty service. Monospiral (shown), level
wind and random wrap spools are available.
Special Application Reels
Over the years, Gleason Reel has developed a variety
of reels to fit niche applications. These include, among
others, a Pendant Control Reel (left), Welding Reels for
both Arc and Gas Welding and Combination Reels that
are both spring and motor powered.
Gleason slip rings solve a common problem in today’s world; transfer of electric current from a stationary member to one that
rotates. There is a Gleason slip ring solution for virtually anything that rotates on a fixed axis and requires a flow of electricity.
The four basic series are:
• Compact…30–75 Amps, 2–20 poles, rated at 600 volts nominal 40 rpm, reversing.
• Rota-PowerTM…35–200 Amps, 2–36 poles, rated at 600 volts, 125 rpm, reversing.
Employs unitized, bearing-mounted design for ease of installation and long life.
• High Amperage…Custom designed for heavy duty applications to 700 Amps.
Air-gap design meets demands of damp or particle-laden atmospheres.
• High Voltage…Designed for heavy duty, high voltage applications.
Rated for 5,000, 8,000 or 15,000 volts. Maximum 300 Amps, 300 rpm.
Properly Manage Cables and Hoses in Your Workplace.
Gleason Reel Engineered Products Group Has What You Need.
There are three methods of managing cables and hoses in the workplace…spooling on reels, hanging from festoons or encasing in
carriers. The Gleason Engineered Products Group features all three types; custom assembled spring and motor reels, cable carriers
and festoon systems in an astounding range of sizes and capacities. Whether you are protecting low-voltage leads and ink tubes in
a wide format printer or trying to control hundreds of feet of 3" cable on an off-shore drilling rig, the Engineered Products Group
can design and manufacture the very best solution to your needs. With experience dating back to 1911, the name Gleason Reel is
synonymous with Effective, Efficient Cable and Hose Management.
PowerTrak™ Cable Carriers
Cable carriers organize and protect cords, cables, tubes and hoses on reciprocating machines. Available in four styles in an extremely
wide range of sizes, Gleason cable carriers are custom assembled with steel or molded nylon side chains. One piece molded nylon
links are also available.
Series L, E and EF
Steel PowerTrak
Cable Carriers
Hose & Cable Reels
Whether your application calls for the heavy-duty
Series E or the mill-duty and super duty Series
EF capable of handling “oversized” cables and
hoses on off-shore drilling rigs, there is a Gleason
steel cable carrier for you. Roller supports and
guide trays are also available for extended travel.
Cable-Master Cable Reels
Versatility makes this one of the most widely
used cable reels in the world. Automatic spring
rewind for hand pull or machine mounting. May
be mounted base up, down or to wall for vertical
or horizontal hose travel. Spool diameters of 14",
16" or 19", handles up to 70' of cable with as many
as 12 conductors. (As with all cable reels, actual
maximum capacity varies with cable type and size
and type of application.)
Hose Reels
Hand pull or machine mount connecting machines
to air/water supply. Gleason can supply hose reels
in several duty ranges. There is also one series
specifically designed for dual hydraulic hose control.
Series GRP PowerTrak
Non-metallic
Cable Carriers
Series G PowerTrak
Cable Carriers
Featuring molded fiberglass reinforced
side chains separated by steel rods,
extruded aluminum bars or custom
milled aluminum bars, the series G
PowerTrak cable carrier offers the
utmost in versatility. Can be installed
to operate vertically or horizontally
and will also operate “on edge”.
One piece molded fiberglass reinforced
links are lightweight and corrosion
resistant. Links easily snap together
to customize length. Some models flip
open to allow easy cable installation.
Also available in fully enclosed version.
Series S Reels
Designed primarily for machine mounting,
Series S is slightly heavier and available in
larger sizes than the Cable-Master (above).
Spool diameters to 32" will handle up to 200'
cable with 2 to 36 conductors.
Series MMD and SM Mill Duty Reels
The heavy duty Series MMD and even more rugged SM are
spring powered and specially designed for continuous steel
mill and magnet service. Everything about these reels says
“long life, even under the most adverse conditions”.
Typical Cable Carrier Application
Slip Rings for Rotational Movement
Series SHO and TMR Reels
Spring powered SHO reels (right) and motor
powered TMR reels are designed for extraheavy duty service. Monospiral (shown), level
wind and random wrap spools are available.
Special Application Reels
Over the years, Gleason Reel has developed a variety
of reels to fit niche applications. These include, among
others, a Pendant Control Reel (left), Welding Reels for
both Arc and Gas Welding and Combination Reels that
are both spring and motor powered.
Gleason slip rings solve a common problem in today’s world; transfer of electric current from a stationary member to one that
rotates. There is a Gleason slip ring solution for virtually anything that rotates on a fixed axis and requires a flow of electricity.
The four basic series are:
• Compact…30–75 Amps, 2–20 poles, rated at 600 volts nominal 40 rpm, reversing.
• Rota-PowerTM…35–200 Amps, 2–36 poles, rated at 600 volts, 125 rpm, reversing.
Employs unitized, bearing-mounted design for ease of installation and long life.
• High Amperage…Custom designed for heavy duty applications to 700 Amps.
Air-gap design meets demands of damp or particle-laden atmospheres.
• High Voltage…Designed for heavy duty, high voltage applications.
Rated for 5,000, 8,000 or 15,000 volts. Maximum 300 Amps, 300 rpm.
C-Rail, I-Beam and Diamond Rail Festoon Systems
Festoons are the ideal solution for supplying power to moving equipment when there is sufficient vertical space to allow for looping
of the cables and hoses. Models to handle wide range of loads and speeds. Typical trolleys pictured below.
ENGINEERED
PRODUCTS GROUP
Diamond Rail
Festoon Systems
Track • Master
Festoon Systems
Available in three sizes with either
clips for round cables/hoses, cable
clamps for flat cables, or specially
designed clamps for holding a mixed
load of hoses, round cables and flat
cables. Maximum loads to 125 lbs
per trolley.
Beam • Master
Festoon Systems
Wide variety of trolley sizes and configurations
designed for speeds to 650 fpm with loads to 1300
lbs. per trolley. Widely used on container cranes,
machine tools, material handling equipment,
steel mill cranes, etc.
Unique heavy duty festoon system
follows your machinery or conveyor
line, even around curves. Supplies
electric power or compressed air
where needed, when needed. Curved
rail sections available with 36" to 340"
radii. Straight sections also available.
Maximum load 50 lbs. per trolley.
• Spring & Motor Powered Cable and Hose Reels
• C-Rail and I-Beam Festoon Systems
• Steel and Nylon Cable Carriers
• Slip Rings
Gleason Reel Corp.
600 South Clark St. • P.O. Box 26
Mayville, WI 53050
Phone: 920-387-4120 • Fax: 920-387-4189
www.gleasonreel.com
02/25/08
For more information go to www.gleasonreel.com or Gleason Product CD
Eng4pg1203.d
PRE-ENGINEERED
PRODUCTS GROUP
• Spring Powered Cord, Cable, and Hose Reels
• C-Rail and Wire Rope Festoon Kits
• Nylon Cable Carrier Kits • Limit Switches
• Static Discharge Reels
• Tool Balancer Reels
For more information go to www.hubbell-gleason.com or Hubbell Workplace Solutions CD
Minimize Damage, Reduce Danger and Improve Productivity by
Properly Managing Cords, Cables and Hoses in Your Workplace
Effective management reduces cuts and abrasion to cords, cables and hoses, eliminates dangerous and time consuming tangles,
and helps keep machinery operating at peak efficiency. The Gleason Pre-engineered Products Group includes standard reels,
cable carriers and festoon systems designed to solve most situations.
Hose & Cable Reels
Heavy Duty Single Hose Reels
Hand pull or machine mount connecting machines to
air/water supply. May be mounted base up, down or to
wall for vertical or horizontal hose travel. 1/4", 3/8" or
1/2" hose, 25', 35' or 50' long. 340° pivot available.
Industrial Hose Reels
Open spool hose reels with automatic spring rewind.
Ideal for mounting under work bench. May also be
hung from wall or ceiling. 1/4", 3/8" or 1/2" hose, in
lengths to 50'. Durable baked polyester finish.
Compact Cord Reels
Closed spool design may be mounted to ceiling or
wall. Available with incandescent or fluorescent lamp,
single or triple outlet. Heavy gauge steel housing. 26"
pig tail plugs into standard outlet. Also available with
bare cord or with plug on cord and outlet on pigtail for
cart mounting.
Industrial Cord Reels
Ideal for wide variety of industrial applications mounted
to wall, ceiling or under work bench. Available with
single outlet, duplex box, incandescent or fluorescent
lamp, or bare cord. Open spool design. Rugged steel
construction with non-conductive, hi-impact polyester
collector cover. Cords to 70' long.
Heavy Duty Electric Cable Reels
Fully automatic rewind. Machine mountable. Smaller
models may also be hand pull. 14" to 28" spool
diameters. 6 AWG to 16 AWG cable, three to twelve
conductors, lengths to 100 feet. All welded steel
construction. Many options available
Festoon Systems
Wire Rope Festoon Kits
Pre-engineered kits take mystery out of festooning. Each kit
includes everything you need. Just add cable or hose. Kits for flat
cable or round cable/hose. Travel distances to 60'. Available with
exclusive nylon Lock ‘n Roll trolleys or steel trolleys
™
C-Rail Festoon Kits
Specially Designed for Overhead Cranes
Install a high speed, smooth operating festoon system on an overhead
crane or similar application. Kits include all required parts
including mounting arms and brackets.
Non-metallic Cable/Hose Carriers
Cable Carriers protect cables and hoses on reciprocating machinery. Safety and reliability are increased when cables and hoses are
kept together, away from moving components. Durable links are molded from fiber-reinforced virgin nylon which is highly wearresistant, self lubricating and not damaged by salt or hard water, lubricating oils or hydrocarbons such as fuels. Large variety of
sizes for cable or hose up to 1.676" dia. Flip top and totally enclosed designs also available.
Available in Bulk or Easily Assembled Kits
Links easily snap together to customize length to exactly meet your requirements. There are “Basic Kits” and “Extender Kits”. Each
basic kit contains enough trak for 3' of machine travel (6' when center mounted) plus mounting brackets. Extender kits each have
12" of trak for increasing system length.
Bulk trak is sold by full carton only, in 3' lengths with the total amount in each carton determined by trak size. Mounting brackets
are available separately.
Rotary Limit Switches
Control Machines & Provide Overtravel Protection
Limit the travel of electrically operated doors, conveyors, hoists, machine tool work tables
and similar devices. Equipment having rotating mechanisms, or linear motion which
can be translated into rotational motion, can be controlled by these versatile switches.
Switches feature rugged die-cast enclosures, two or four circuits, choice of four gear
ratios and standard, long dwell or fine adjustment cams. NEMA 1, NEMA 4, or NEMA 12.
Tool Balancers
Make Tools Virtually Weightless
Three types of balancers...handle tools from 0.5 lbs. to 187 lbs.
All feature rugged housings, easy adjustment and steel cables.
Complete range of accessories also available including safety
cables, hanger clevises, etc. Retractors and torque reels also
available for specialized applications.
Static Discharge
Open or Closed Spool Reels, Bonding Cables
Ground portable equipment or prevent sparks from static electricity
generated by movement and flow of flammable liquids. Reels are
rugged steel construction. Open spool reel and bonding cables offered
with wide variety of grounding clamps and plugs. Closed spool reel
also available with “Y” cable for dual grounding. Bonding cables up
to 20' in length...reels up to 100' long cable. Various connectors and
a grounding well also available separately.
Gleason Reel Corp.
P.O. Box 26 · 600 South Clark St.
Mayville, WI 53050
PH: 920-387-4120 • FAX: 920-387-4189
www.hubbell-gleason.com
P-E4pg0807
GLEASON
INDUSTRIAL
HOSE REELS
®
A HUBBELL COMPANY
SERIES GH HOSE REELS
SINGLE HOSE GENERAL PURPOSE REEL
STANDARD FEATURES:
• Six frame sizes, six spool widths
• 1/4”, 3/8”, 1/2" and 3/4" low, medium or high pressure hose
• High quality swivel joints designed with
seals for each specific fluid application
• Rugged steel construction
• Full flow shaft and swivel
• Hand pull, fully automatic rewind
• Mount from ceiling, wall or under bench
• Spring motors are safety banded and
lubricated for long, trouble free performance
• Positive ratchet lock
• Multi-position four roller hose guide
• Adjustable hose stop
• Orange polyester baked-on finish
SERIES UH HOSE REELS
SINGLE HOSE GENERAL PURPOSE REEL
STANDARD FEATURES:
• Five frame sizes, five spool widths
• 3/4", 1", 1-1/4" and 1-1/2" hose fittings
Hose must be ordered separately
• High quality swivel joints designed with
seals for each specific fluid application
• 300 PSI standard rating
(ratings to 10,000 PSI available).
• Wide or Narrow spool.
• Direct or Chain Drive.
• Rugged U-shaped frame.
• Safetychange® Spring Motor.
• Optional 340º Pivot Base.
• Optional Roller Guide accommodates
a variety of mounting configurations.
• Positive ratchet lock.
SERIES K HOSE REELS
DUAL HOSE HYDRAULIC REEL
STANDARD FEATURES:
• Five frame sizes, four spool widths
• 1/4", 3/8", 1/2" and 3/4" hose fittings
Hose must be ordered separately
• 3000 PSI standard swivel joint rating.
• Dual port swivel joint with replaceable seals.
• Hose connections readily accessible.
• Welded, all steel frame for maximum strength.
• Safetychange® Spring Motor.
• Optional Ratchet Lock.
• Pre-lubricated, sealed ball bearings.
SERIES H and E-Z HOSE REELS
HEAVY DUTY FOR MACHINE PULL or
E-Z™ PULL FOR GENTLE HAND PULL
SERIES “H” APPLICATION:
• Connect machines to air/water supply.
• Hand pull, with or without ratchet stop.
• Ideal for fluids, compressed air.
• Mount base up, down or to wall for vertical or
horizontal hose travel.
• Add optional 340º pivot base. Reel turns to
follow hose pay-out.
E-Z™ PULL APPLICATION:
• Mount under workbench or low on wall.
• Supply air to tools, compressed air for inflating or
cleaning.
• Inrease safety…hose does not “fly back” to reel.
SERIES MH HOSE REELS
COMMERCIAL / INDUSTRIAL APPLICATIONS
FOR MOBILE OUTDOOR ENVIRONMENT USE
STANDARD FEATURES:
• Two frame sizes, three spool widths
• 1/4”, 3/8”, 1/2", 1" or 1-1/2” hose
• Air, water, oil, grease or oxy/acetylene duty
• Rugged steel construction
• High quality swivel joints designed with
seals for each specific fluid application
• Hand pull, fully automatic rewind
• Heavy duty mounting brackets
• Spring motors are safety banded, totally
enclosed and lubricated for long, trouble
free performance
• Positive ratchet lock
• Multi-position adjustable full width hose
guides to prevent hose from "stacking"
• Orange polyester baked-on finish
• Adjustable hose stops
SERIES HH HOSE REELS
SINGLE HOSE GENERAL PURPOSE REEL
MANUAL PULL-OFF, HANDCRANK REWIND
STANDARD FEATURES:
• Four frame sizes, four spool widths
• 1/2", 3/4" and 1" hose fittings
Hose must be ordered separately
• Air, water, oil or grease duty
• Rugged steel construction
• High quality swivel joints designed with
seals for each specific fluid application
• Manual pull off, handcrank rewind
• Spool locking pin acts as a holding
brake to prevent spool from unwinding
when not in use
• Locking pin also acts as an adjustable
drag brake to control spool rotational
speed during manual hose pull off.
• Heavy duty mounting brackets
• Orange polyester baked-on finish
Cable and Hose Management
Since 1911, Gleason Reel Corp. has been in the business of cable and hose management. Our products are designed
to convey and protect valuable cables and hoses that power and control moving machines of all types. They improve
productivity and safety on the job by moving cables and hoses away from hazardous locations on machinery or the shop
floor into a controlled environment. Whether you choose Reels for efficient storage and payout from virtually any angle,
Festoon Systems for overhead applications or PowerTrak® for protection on machinery in motion, your cables and/or
hoses will last longer and provide better service with a cable management system from Gleason Reel Corp…
…The Cable & Hose Management Company!
In addition to the hose reels shown in this bulletin be sure to look for Gleason cable and cord reels, festoon systems,
Gleason Powertrak cable and hose carriers, slip ring assemblies, Hubbell Workplace Solutions workstation kits and
components, tool balancers and rotary limit switches.
In your area contact:
Gleason Reel Corp.
600 South Clark St. • P.O. Box 26
Mayville, WI 53050
Phone: 920-387-4120 • Fax: 920-387-4189
www.hubbell-gleason.com
March 2007
IHR4pg0707
Organize Your Work Site
TM
Qualtech Information, Documentation & Inspection Stands
INFORMATION STANDS feature 3-ring
binder mechanisms to hold routing sheets,
assembly details, etc. Available in several
sizes and configurations. Standard models
include steel pedestals with glides. Deluxe units
include adjustable height stand with casters, locking storage compartment, and side tray. Panels
are yellow high impact polystyrene.
DOCUMENT STANDS are available in in a
wide range of sizes and configurations. All
models have a writing surface with two clips
and hinged, clear document protector. Wall
mounted unit also available.
WORKPLACE SOLUTIONS
PRODUCT GROUP
Kaizen Event Display Stand
INSPECTION STANDS include a cushioned work surface and back display panel
with two clips for drawings. Deluxe version
includes four locking casters, utility drawer,
and clear hinged acrylic panels on display
panel. Standard model has four glides.
Compu-KeepTM NOTEBOOK VAULT stops theft of notebook computers or confidential data. Ideal for clinics and hospitals, dorm or hotel rooms, general offices. May be mounted to
desk/credenza top, wall, or to
movable office dividers using
optional partition mounting
plate. Constructed of rugged 16
gauge steel, unit features heavy
duty hinges, key lock and gas
spring to support cover while
inserting computer.
Designed for Kaizen
Planning Events, this “D”
sized display will find multiple uses around the shop
and office, wherever small
group communication is
necessary. It comes supplied with one laminated
“D” size planning chart (for
wipe-off markers) and five
pre-printed paper charts.
Three clips hold charts
securely in place and a
handy tray keeps markers
within reach.
COMPUTER SYSTEM ENCLOSURES offer maximum
protection for monitor, tower or desk top CPU and keyboard.
Also protects valuable data. Fan and
filter assembly, locking keyboard
and CPU doors and surge suppressing outlet strip included on most
models. Industrial duty and office
styled versions available as are
keyboard and printer enclosures.
Shipping/Packaging Workstation
Speed your shipments out the door. Shipping station kit was designed with
utility and flexibility in mind. Features strong extruded aluminum frame,
laminate wood work surface, light with four 48" fluorescent tubes, packaging foam dispenser with cutting bar, adjustable shelf with room for label printers,
power strip, swing arm mounted monitor and printer trays. May be assembled in
a variety of configurations to fit your space and job requirements.
• Workstation Kits, Accessories and Components
• Jibs and Booms • Tool Balancers
• Mobile Kits • Packaging Station Kits
• Work Stands • Computer Enclosures
Gleason Reel Corp.
600 South Clark St. • P.O. Box 26
Mayville, WI 53050
Phone: 920-387-4120 • Fax: 920-387-4189
www.gleasonreel.com
For more information go to www.gleasonreel.com or Hubbell Workplace Solutions CD
HWS4pg1103
Improve Productivity and Safety in the Workplace.
Tool Balancers
Ergonomics Pays Dividends.
Make Tools Virtually Weightless
If your company assembles, ships, or has an office, paying attention to workplace ergonomics increases productivity, reduces
comp claims and costs, and improves employee morale. Few tasks in the average workplace are the same and no two workers are
identical. Hubbell Workplace Solutions workstation systems are fully adjustable to fit any task and any worker. We do not make
workbenches. We specialize in workstation kits, components and accessories that can be affixed to or used with new or existing
benches, conveyors or other work areas.
Three types of balancers...handle tools from 0.5 lbs.
to 187 lbs. All feature rugged housings, easy adjustment and steel cables. Complete range of accessories including safety cables, hanger clevises, etc.
Retractors and torque reels also available for
specialized applications.
Don’t throw away those old but sturdy work benches
just because they’re not fully equipped. You don’t
need to buy new benches to make your workplace
safe and efficient.
Torq-ArmsTM and
Tool Positioners
Neutralize Torque…Eliminate Tool Lifting
Retrofit your old
work benches.
Available in a variety of styles and sizes, with several
mounting options, Hubbell Workplace Solutions
workstation kits will fit virtually any existing bench,
at a cost so low it will surprise you.
Available for either air or electric tools, torque neutralizing
arms and tool positioners support the weight of the tool and
allow easy tool positioning while preventing transmission of
rotational forces to workers hands or wrists. May be mounted
to bench tops or added to single or dual column workstations.
From this
to this
• Minimum down time.
• Minimum expense.
Other Productivity Improvement Tools
The unparalleled flexibility of the workstation construction system has led to unique kits that have found extreme usefulness in
many situations. More information on these and additional kits is available on our web site: www.gleasonreel.com.
P u s h ‘ n P l a c e TM
Mobile Workstation
Dual Column Workstation Kits
Available with two straight or one curved tool rail, a choice of
three mounting bases and a range of sizes. Easily accessorized
with work lights, air manifolds, swing arms, bars to hold bin
boxes, etc. Kits are shipped fully or partially assembled and
include all hardware.
Here’s a way to maintain flexibility on the plant floor without sacrificing
safety and productivity. Rolls easily to work benches, tables,
conveyors, anywhere you need overhead support for tools.
Includes air manifold which, when fitted with quick disconnect,
can be hooked to air supply at the site.
Single Column
Workstation Kits
P l a c e ‘ n P i c k TM Shelf Cart
The efficient and economical way to
meet ergonomic requirements. Each kit
includes fixed or swing boom, trolley,
tool balancer and sturdy mounting base.
A variety of swing arms, two shown at
right, may be added to make workstation
even more functional.
Whether the shelves are used for holding bins, as shown, work
in process, or are put to some other use, this versatile cart is
handy to have around. Available in four widths (30"–60"), the
shelves may be mounted sloped or level and heights are fully
adjustable. Includes four locking casters.
Jibs...Bench, Floor or Ceiling Mounted
Assembly lines or floor based maintenance areas may be better served by swinging or fixed jibs rather than traditional work benches. If jibs are the answer to
your workstation problem, Hubbell Workplace Solutions has a full range of sizes
and styles with capacities from 30 to 300 lbs. The ceiling mounted style is especially suited to situations where the entire floor area must be kept clear. Overhead
tool cranes are also available. Most booms are available without columns for wall
or building column mounting.
S u p p l y ‘ n R e t u r n Feed Cart
Gravity Feed Rack
• Bring parts bins to
work station
• Return bins to aisle
• Roll where needed
• Heavy-duty construction
for large parts bins
• Available in several widths
• Fully adjustable
Feature three levels of conveyors; two for supplying full
bins to assembly area and
one for returning empty bins
to aisle for easy pick-up. May
also be assembled with all three
conveyors sloping toward work area. Sturdy
extruded aluminum frame with heavy steel
brackets and four locking casters.
Economical way to place parts
bins within easy reach of assemblers. Position rack, adjust height and
slope of conveyors and you are ready for
production. Variety of widths…there is a
rack available for any standard-size
work bench. Extruded aluminum
and steel frame includes four
adjustable glides.
Improve Productivity and Safety in the Workplace.
Tool Balancers
Ergonomics Pays Dividends.
Make Tools Virtually Weightless
If your company assembles, ships, or has an office, paying attention to workplace ergonomics increases productivity, reduces
comp claims and costs, and improves employee morale. Few tasks in the average workplace are the same and no two workers are
identical. Hubbell Workplace Solutions workstation systems are fully adjustable to fit any task and any worker. We do not make
workbenches. We specialize in workstation kits, components and accessories that can be affixed to or used with new or existing
benches, conveyors or other work areas.
Three types of balancers...handle tools from 0.5 lbs.
to 187 lbs. All feature rugged housings, easy adjustment and steel cables. Complete range of accessories including safety cables, hanger clevises, etc.
Retractors and torque reels also available for
specialized applications.
Don’t throw away those old but sturdy work benches
just because they’re not fully equipped. You don’t
need to buy new benches to make your workplace
safe and efficient.
Torq-ArmsTM and
Tool Positioners
Neutralize Torque…Eliminate Tool Lifting
Retrofit your old
work benches.
Available in a variety of styles and sizes, with several
mounting options, Hubbell Workplace Solutions
workstation kits will fit virtually any existing bench,
at a cost so low it will surprise you.
Available for either air or electric tools, torque neutralizing
arms and tool positioners support the weight of the tool and
allow easy tool positioning while preventing transmission of
rotational forces to workers hands or wrists. May be mounted
to bench tops or added to single or dual column workstations.
From this
to this
• Minimum down time.
• Minimum expense.
Other Productivity Improvement Tools
The unparalleled flexibility of the workstation construction system has led to unique kits that have found extreme usefulness in
many situations. More information on these and additional kits is available on our web site: www.gleasonreel.com.
P u s h ‘ n P l a c e TM
Mobile Workstation
Dual Column Workstation Kits
Available with two straight or one curved tool rail, a choice of
three mounting bases and a range of sizes. Easily accessorized
with work lights, air manifolds, swing arms, bars to hold bin
boxes, etc. Kits are shipped fully or partially assembled and
include all hardware.
Here’s a way to maintain flexibility on the plant floor without sacrificing
safety and productivity. Rolls easily to work benches, tables,
conveyors, anywhere you need overhead support for tools.
Includes air manifold which, when fitted with quick disconnect,
can be hooked to air supply at the site.
Single Column
Workstation Kits
P l a c e ‘ n P i c k TM Shelf Cart
The efficient and economical way to
meet ergonomic requirements. Each kit
includes fixed or swing boom, trolley,
tool balancer and sturdy mounting base.
A variety of swing arms, two shown at
right, may be added to make workstation
even more functional.
Whether the shelves are used for holding bins, as shown, work
in process, or are put to some other use, this versatile cart is
handy to have around. Available in four widths (30"–60"), the
shelves may be mounted sloped or level and heights are fully
adjustable. Includes four locking casters.
Jibs...Bench, Floor or Ceiling Mounted
Assembly lines or floor based maintenance areas may be better served by swinging or fixed jibs rather than traditional work benches. If jibs are the answer to
your workstation problem, Hubbell Workplace Solutions has a full range of sizes
and styles with capacities from 30 to 300 lbs. The ceiling mounted style is especially suited to situations where the entire floor area must be kept clear. Overhead
tool cranes are also available. Most booms are available without columns for wall
or building column mounting.
S u p p l y ‘ n R e t u r n Feed Cart
Gravity Feed Rack
• Bring parts bins to
work station
• Return bins to aisle
• Roll where needed
• Heavy-duty construction
for large parts bins
• Available in several widths
• Fully adjustable
Feature three levels of conveyors; two for supplying full
bins to assembly area and
one for returning empty bins
to aisle for easy pick-up. May
also be assembled with all three
conveyors sloping toward work area. Sturdy
extruded aluminum frame with heavy steel
brackets and four locking casters.
Economical way to place parts
bins within easy reach of assemblers. Position rack, adjust height and
slope of conveyors and you are ready for
production. Variety of widths…there is a
rack available for any standard-size
work bench. Extruded aluminum
and steel frame includes four
adjustable glides.
Organize Your Work Site
TM
Qualtech Information, Documentation & Inspection Stands
INFORMATION STANDS feature 3-ring
binder mechanisms to hold routing sheets,
assembly details, etc. Available in several
sizes and configurations. Standard models
include steel pedestals with glides. Deluxe units
include adjustable height stand with casters, locking storage compartment, and side tray. Panels
are yellow high impact polystyrene.
WORKPLACE SOLUTIONS
PRODUCT GROUP
DOCUMENT STANDS are available in in a
wide range of sizes and configurations. All
models have a writing surface with two clips
and hinged, clear document protector. Wall
mounted unit also available.
Kaizen Event Display Stand
INSPECTION STANDS include a cushioned work surface and back display panel
with two clips for drawings. Deluxe version
includes four locking casters, utility drawer,
and clear hinged acrylic panels on display
panel. Standard model has four glides.
COMPUTER SYSTEM ENCLOSURES offer maximum
protection for monitor, tower or desk top CPU and keyboard.
Also protects valuable data. Fan and
filter assembly, locking keyboard
and CPU doors and surge suppressing outlet strip included on most
models. Industrial duty and office
styled versions available as are
keyboard and printer enclosures.
Designed for Kaizen
Planning Events, this “D”
sized display will find multiple uses around the shop
and office, wherever small
group communication is
necessary. It comes supplied with one laminated
“D” size planning chart (for
wipe-off markers) and five
pre-printed paper charts.
Three clips hold charts
securely in place and a
handy tray keeps markers
within reach.
Shipping/Packaging Workstation
Speed your shipments out the door. Shipping station kit was designed with
utility and flexibility in mind. Features strong extruded aluminum frame,
laminate wood work surface, light with four 48" fluorescent tubes, packaging foam dispenser with cutting bar, adjustable shelf with room for label printers,
power strip, swing arm mounted monitor and printer trays. May be assembled in
a variety of configurations to fit your space and job requirements.
• Workstation Kits, Accessories and Components
• Jibs and Booms • Tool Balancers
• Mobile Kits • Packaging Station Kits
• Work Stands • Computer Enclosures
Gleason Reel Corp.
600 South Clark St. • P.O. Box 26
Mayville, WI 53050
Phone: 920-387-4120 • Fax: 920-387-4189
www.gleasonreel.com
For more information go to www.gleasonreel.com or Hubbell Workplace Solutions CD
HWS4pg0804