GOLDENHORN 12S
Transcription
GOLDENHORN 12S
GOLDENHORN 12S SHOTBLAST HOSE SUPER 12BAR 02.11.2016 MATERIAL HANDLING GOLDENHORN 12S Shotblast hose super 12bar APPLICATION / USE Application specially designed hose for professional use in all shotblast applications and suitable for all commonly used blasting media Temperature -30°C to +85°C Features ultra wear resistant and thick tube, designed for high kink resistance and perfect flow, suitable for international standard fittings CONSTRUCTION Type mandrel built Tube blend of synthetic and natural elastomers, black, smooth, antistatic, high abrasion resistant according to DIN 53516: ~50mm³ Reinforcement high tensile textile cord Cover blend of synthetic and natural elastomers, black, smooth with cloth impression, antistatic, abrasion, weather and ozone resistant Standard/Notice EN ISO 3861 in mm mm psi psi mm lb / ft ft SBD036-13x7 1/2 27 7 174 522 104 0,37 131 SBD036-13x8.5 1/2 30 8,5 174 522 104 0,48 131 SBD036-16x7 5/8 30 7 174 522 128 0,42 200 SBD036-19x7 3/4 33 7 174 522 152 0,48 200 SBD036-19x9.5 3/4 38 9,5 174 522 152 0,71 200 SBD036-25x7 1 39 7 174 522 200 0,57 200 SBD036-25x11.5 1 48 11,5 174 522 200 1,04 200 1-1/4 48 8 174 522 256 0,80 200 SBD036-32x8 The Superlas Group cannot be held responsible or liable for the incorrect use or application of its products. Before using a Superlas product for an application that is not covered in the product information, written approval must be obtained from Superlas technical department or office. All hose products must be stored, used and maintained according to the “Rubber Manufacturers Association” (RMA) guidelines and must be inspected regularly and replaced immediately in the event of damage for safety reasons. Due to our policy of continuous improvement all technical data is subject to change without notice. All transactions are agreed according to our general terms and conditions of sale. © 2016 superlas 1 GOLDENHORN 12S SHOTBLAST HOSE SUPER 12BAR 02.11.2016 in mm mm psi psi mm lb / ft ft SBD036-32x10.5 1-1/4 53 10,5 174 522 256 1,24 200 SBD036-32x11 1-1/4 54 11 174 522 256 1,31 200 SBD036-38x8.5 1-1/2 55 8,5 174 522 304 0,99 200 SBD036-38x11 1-1/2 60 11 174 522 304 1,32 200 SBD036-42x9 1-5/8 60 9 174 522 336 1,12 200 SBD036-50x10 2 70 10 174 522 400 1,51 200 SBD036-51x11 2 73 11 174 522 408 1,68 200 SBD036-60x11 2-3/8 82 11 174 522 480 1,97 200 SBD036-63x11 2-1/2 85 11 174 522 504 2,05 200 SBD036-76x12 3 100 12 174 522 608 2,55 200 SBD036-80x12 3-3/16 104 12 174 522 640 2,58 131 SBD036-90x12 3-1/2 114 12 174 522 720 2,86 131 SBD036-102x12 4 126 12 174 522 816 3,59 200 Other bore sizes and dimensions are available on request. The Superlas Group cannot be held responsible or liable for the incorrect use or application of its products. Before using a Superlas product for an application that is not covered in the product information, written approval must be obtained from Superlas technical department or office. All hose products must be stored, used and maintained according to the “Rubber Manufacturers Association” (RMA) guidelines and must be inspected regularly and replaced immediately in the event of damage for safety reasons. Due to our policy of continuous improvement all technical data is subject to change without notice. All transactions are agreed according to our general terms and conditions of sale. © 2016 superlas Powered by TCPDF (www.tcpdf.org) 2