EVTC Exhaust - PrestonCycle

Transcription

Section 5
Baffles ..................... 5, 7, 10, 14, 15, 31
Brackets....................... 2, 3, 7, 8, 13
Clamps .................................. 14-16, 21
Drag Pipes ....................................... 12
Exhaust Wrap ..................................... 9
Hardware ....................................... 13, 34
Mufflers ...........4,6,8,10,16-22,24,27-28
Heat Shields .................2,11,12, 23,30-33
Cycle Shack
Fat Boy ............................................7
FLT, FLHS .........................20,22,24-26
FXDB, FXDC .................................. 8
FXR .................................................6
FXST,FLST ...................................2-5
Sportster, Evo 1986-ON ...........10-11
Paughco ....................................4,26-29
Samson ...............................................9
www.prestoncycle.com
5-1
FXST-FLST
95258 PHD-114TA, 1-3/4” Tapered Muffler Pipes
95233 PHD-140SS, 1-3/4 Slash muffler pipes
Cycle Shack Muffler Pipes- PHD-114 Series
Cycle Shack’s PHD-114 Series 1-3/4” and 2” pipes fit FXST,
FLST 1984-on and 1985-86 4-speed FXE. Features include
true one-piece construction, accepts the original factory heat
shield and has 1-3/4” head pipes and 2-1/2” diameter mufflers. Uses stock flange rings, gaskets, and hardware and will
mount to the factory bracket. 1984-94 fits bracket 65459-84A
and 1995 versions fit bracket 65459-95.
2000-06 1984-99 Muffler Style
9523195258 Tapered
-
95264
As above 2”
-95260
Turn-out
95233
-
Super slash
Muffler/Drag Pipe Heat Shields
Designed to fit with either Drag or Muffler type pipes. Covers
do not have cut out for cross-over tube. Sold in sets.
94020 Smooth BT Evo
94021 Perforated BT Evo
94024 Ribbed BT Evo
94025 Smooth XL 1986-03
Stainless Steel Exhaust Taper Valves
27501 Evo (pair)
FXST, FLST Exhaust Support
Support mounts stock or custom drag pipes to frame. Stock
on FXST but can be used on Fat Boy to mount lower drag
pipes. PCP 82010 can be used on 1995-on models to mount
early style Porkster or Cycle Shack drag pipes.
PCP
Application
82010 FX, FLST 1984-94, black (65459-84A)
82011 As above, chrome
82012 FX, FLST 1995-99, chrome (65459-95)
82013 FXSTF-N 1995-99, chrome (65515-95)
24043 Chrome bolt kit
5-2
FXST-FLST
Drag Pipes-Cycle Shack
These 38” long straight-through drag pipes fit the 1984-on
FXST-FLST Softail®. Available in traditional 1-3/4” diameter
or beefier 2” O.D. tubing. Front pipe mounts to factory support
tube or use our BK-8 mount kit #27008 (not included) and
rear pipe mounts to chrome fender strut. To be used with factory flange rings and gaskets.
95234 1-3/4” FXST Drag pipes 1984-06
95235 2” as above for 1984-06
6444
PHD-114GF, 1 3/4” Mini-Tail Muffler Pipes 1984-99
Shotgun Muffler Pipes-Cycle Shack
This is the look the 1984-99 Harley-Davidson FXST-FLST
Softail was made for. This traditional rigid look is available
with 1-3/4” O.D. head pipes with Mini-Tails mufflers. All feature our exclusive 16-gauge tubing, true one-piece construction, and show-chrome. Fits 1984-99 FXST-FLST Softails.
(will not fit 1985-86 FX 4 speed models). Use our 1164 heat
shield to keep boots and pants from melting all over the beautiful show-chrome. Front pipe mounts to factory support tube
or to our BK-8 Mounting kit (not included, see below).
6444 Mini-Tail Mufflers 1984-99
Mounting Bracket
Down Draft 2-1/4” Pipe Set
Fits 1986-06 FXST and 1999-06 TC-88. Looks great with
#21813 turbo fan velocity stack, sold separately.
95311
This BK-8 mount bracket kit can be used in place of the factory muffler support tube (OEM#65459-84A or #65459-95) for a
cleaner installation with our part numbers PHD-114GT/PHD114GTA, PHD-114GS/PHD-114GSA, PHD-114G/PHD-114GA,
PHD-114GF/PHD-114GFA, PHD-214GT/PHD-214GTA,
PHD101G/PHD101GA, PHD-201/PHD201GA
27008 (Cycle Shack BK-8)
Maxx-Shot FXST Exhaust Set
Stainless Steel Taper Valve Exhaust Kit
This valve fits into the header at the flange area to compensate for exhaust velocity when large diameter pipes are
installed. Fits Evo and XL models 1986-on with large O.D.
aftermarket pipes. Kit includes 2 valves with gaskets.
27502 Kit
Features 1-3/4” headers with full cover 2-1/4” form fit cover
set. Brackets included for 1986-06 FXST models EV and
TC-88.
95984
5-3
FXST
Chrome Up Sweep Header Sets by Paughco
Pipes include brackets and will accept straight fishtail extensions or mufflers which must be purchased and mounted
separately.
PCP
Application
95988 1984-94 FXST
95989 1995-06 FXST
Pirate 2” Curved Pipe Set FXST 1986-06
95948
Evo Exhaust Flanges - Chromed
Fits 1983-on 1340 BT and replaces 65328-83.
27202 Kit as shown
753
Kit (2 clamps, 2 retainers)
11105 Snap rings (65325-83) (10 Pack)
25172 Stainless woven gaskets (pr)
10807 Exhaust stud (5 pack)
Cycle Shack Replacement Mufflers 1995-99
Light weight, 2 1/2” O.D. slip-fit replacement mufflers for
1995-99 FXST, FLST, FLSTF, and FLSTN “Fatboy” models;
feature an all-steel core that will not burn out. 1995-99 models
bolt to OEM bracket #65459-95.
Sold in pairs
PCP Style
Description
94750 Tapered FXST-FLST 1995-99
94754 Tapered FLSTF/N “Fatboy” 1995-99
94755 Baloney FLSTF/N “Fatboy” 1995-99
94756 Turn-outs FLSTF/N “Fatboy” 1995-99
Chrome Radii Pipe Set
Features full curve with 2” OD for 1984-on FXST models with
Rigid or Softail frame. Bracket included.
PCP
Years
95955 1984-06
5-4
FXST
MCM FXST Drag Pipe Sets
FXST Short Stuff Pipe Set
Features 1-3/4” headers with full coverage 2-1/4” heat shield
set.
95959
Pipes are 1-3/4” slash cut style 38” length and mount by stock
brackets. Heat shields are included with PCP #95957 only.
95957 1984-99, with formed heat shields
95964 2000-06
95965 1984-99
95966 2” pipes 1984-99
Radii Monster Drag Pipes
Feature 2-1/4” O.D. and include mount brackets for 1986-06
FXST models. Order baffles separately. Black end caps fit
straight cut pipes by drilling 1/4” mount hole
PCP
Style
95981 Down slash
95985* Straight cut (short)
95968 Down slash (short)
95969 Straight cut
82016 Mount bracket
* No mounting hardware
Exhaust Gasket for
Harley Evolutions
A woven wire mesh crush
gasket for use with all Evolution motors when installing
OEM or aftermarket exhaust
systems. (OEM 65324-83A).
25172 Pair
2-1/4” Torque Tube Set
Will quiet loudness.
73564
5-5
FXR-FXRT-FXLR Models
Cycle Shack Mufflers for FXR-FXRS-FXLR
Replacement mufflers for the 1982-86 FXR-FXRS-FXLR and
the 1987-94 FXR-FXRS-FXLR models. Choice of classic tapered, bold “SS”, or stylish turn-out designs to give your FXR
a new look. These low restriction show-chrome beauties also
offer improved performance. Includes hidden channel mounts
and T-bolts for mounting to factory support tube. Uses stock
clamps. Sold as a set of 2.
1982-86 FXR-FXRS
3534 Turn-Out Mufflers
3536 Tapered Mufflers
3538 Baloney-Slice “SS” Mufflers
6432 PHD-123T, 1-3/4” Tapered Muffler Pipes
1-3/4” Muffler Pipes-Cycle Shack
Cycle Shack’s PHD-123 series 1-3/4” muffler pipes fit the
1984-94 Evolution rubber mount FXR, FXRS, FXRT, &
FXLR models (including the 1986-on Low Rider and Super
Glide). Feature an exclusive 16-guage tubing, true one-piece
construction, and show-chrome. 2-1/2” diameter with all steel
mufflers are designed to use stock flange rings, gaskets,
clamps, and hardware. Mounts to factory bracket with concealed mounts for great ground clearance.
Cycle Shack Staggered Duals
for 1984-94 and 1999-00 FXR Series
6432 1-3/4” Tapered style (shown)
95228 2” Tapered Muffler pipes (PHD-223T)
1987-94 FXR-FXRS
NOTE: Factory clamps must be installed with these
pipes or the Warranty is Void!
Preston’s 2” Side Sweeper Exhaust Pipes
Fits 2000-on FXST models without floorboards. Pipes have
oxygen sensor ports with plugs which can be removed for
2007-on models to install sensors.
95962
Drag Pipes-Cycle Shack
Your choice of 1-3/4” O.D. or 2” O.D. 40” long straight-through
pipes for drag racing. Fits 1984-94 Evolution engine rubber
mount FXR, FXRS, FXRT, and FXLR models (including the
1986-on Low Rider® and Super Glide®). Includes channel mounts and hardware for mounting to factory brackets.
Designed to be used with factory clamps, flange rings, and
gaskets.
6436 1-3/4” Drag Pipes
6437 2” Drag Pipes
FXR Exhaust Bracket Mounting Block
Fits all FXR 1982-86 models. Replaces 65780-82. Each.
27242
5-6
FLSTF “Fat Boy”
95104
95105
Cycle Shack 1-3/4” Muffler Pipes
These tapered, “SS”, and Mini-Tails muffler pipes are designed as a direct bolt-on replacement for the factory’s original exhaust system on the new FLSTF “Fat Boy” and Nostalgia models 1991-06. They accept the original factory heat
shields and feature 1-3/4” head pipes, an exclusive 1-piece
construction and show-chrome. Offers improved looks and
performance. These pipes eliminate the cross-over tube used
on OEM factory pipes and bolt directly to the factory muffler
support bars (except 1995-later models) by reusing stock
flange rings and mounting hardware. Order bracket BK-11
(Preston 27009) to mount 1995-later models.
95105 Baloney-Slice “SS” Muffler Pipes (PHD-128SS)
95104 Tapered Muffler Pipes (shown) (PHD-128T)
95106 Mini-Tails Muffler Pipes (PHD-128F)
95106
Mounting Bracket Kit
The BK-11 bracket kit is used for mounting the front pipe to
1995-later FLSTF/FLSTN models.
27009 BK-11
FXST Turnout Pipes 1984-94
6442
PHD114TO
Heat Shield
This beautiful chrome 7” long leg protector will keep your passenger’s boots and pants from melting on your exhaust pipes.
Fits 1-1/2” to 2” O.D. pipes.
1164
Slash Cut 12” Muffler Pipe Baffle
3315 All steel construction
5-7
FXD-FXDC-FXDWG
1-3/4” Drag Pipes-Cycle Shack
These 40”-long, 1-3/4” straight-through drag pipes are designed to fit the 1991-on FXDB “Sturgis” and FXDC “DynaGlide” models. These pipes accept factory heat shields and
re-use the original factory flange rings, gaskets, and clamps,
Use bracket BK-9 (PC#27006) to mount 1991-on models.
95195 1-3/4” Drag pipes (PHD-149)
These muffler pipes fit the 1991-on FXD, FXDB FXDC,
FXDWG “Sturgis” and “Dyna-Glide” models. 1991-94 models
require the use of bracket BK-9 (PC27006 replacing OEM
65674-95). They feature 1-3/4” or 2” head pipes; tapered,
“SS”, turn-out, or Mini-TailsTM styling; our exclusive 16-gauge
tubing, one-piece construction; and show-chrome finish.
These pipes accept the OEM factory heat shields and re-use
the original factory flange rings, gaskets, and clamps.
95192 Turnout (PHD-129TO)
95193 Mini-Tails (PHD-129F)
Preston’s Sweeper Exhaust
Cycle Shack ”Slip Fit” Mufflers
Replacement mufflers for the 1991-on* FXDB “Sturgis” and
FXDC “Dyna-Glide” models. Your choice of classic tapered,
bold “SS”, or stylish turn-out styles to give your bike a new
look and improved performance with these low restriction
show-chrome beauties. Includes hidden channel mounts
and T-bolts for mounting to factory support tube. Uses stock
clamps. Sold as a set of 2.
95710 Baloney Slice mufflers (MS-129)
95711 Tapered mufflers (MT-129)
*For 1991-94 models you must use 1995-on OEM bracket or
our #27006
Fits 1991-on FXD models including 2006-on models with oxygen sensors. Bracket included. Order baffle separately.
95961
Mounting Bracket
This bracket is the equivalent of OEM# 65674-95 and is available in black. Replaces 65674-90 & 65674-90A when installing Cycle Shack pipes on 1991-on Dyna models
27006 (BK-9)
5-8
Samson
Dyna 1991-04 (except 2003-04 FXDWG)
PCP
Mfg#
Style
95975
D-206 Classic
Samson Big Guns II Pipes FXST, FLST 1986-06
Features 1-3/4” head pipes with 2-3/4” full coverage heat
shields. Includes mounting bracket and hardware. Performance baffle ring is not included.
PCP
Type
95947 Long Cannons
High Temperature Exhaust Wrap Kits
Applying this premium wrap will increase power and reduce
radiated exhaust heat. This wrap can handle 1200ºF continuous; 2000ºF intermittent. Kits are available in black or tan and
include 4 extra-long stainless steel tie wraps for that finishing
touch.
PCP
Width Length Colour
28575
2”
25’ Black
28576
2”
25’ Tan
28581
2”
25’ Tan
28579 14” Replacement stainless steel ties (4 pack)
5-9
Sportster 1986-03
Cycle Shack XL Replacement Mufflers
Replacement mufflers for the 1980-03 Sportster models
supplied with slip-fit staggered duals from the factory. Three
styles of these low-restriction, show-chrome beauties to give
your Sportster a new look and improved performance. Rear
muffler mounts to factory support tube. Order brake pedal
stop #2067. Uses stock clamps. Sold as a set of 2.
3528 Tapered Mufflers
3530 Baloney-Slice “SS” Mufflers
Cycle Shack’s PHD-116A series muffler pipes for 1986-03
883cc, 1100cc, and 1200cc Evolution Sportsters. Your choice
of 4 muffler styles, each featuring 1-3/4” head pipes, 2-1/2”
mufflers, show chrome, all steel baffles, and an exclusive 16
gauge one-piece construction. Brake pedal stop is incorporated into the front pipe mount.
Uses stock flange rings, gaskets, and hardware and mounts
to the factory bracket.
6218 Turn-out style
6219 Tapered style
6220 Slash-cut style
6221 Mini-tail style
2” Muffler Pipes
Same great styling and fit as our PHD-116T 1-3/4” pipes
(above), but made with beefier 2” O.D. tubing. Fits 1986-03
883cc, 1100cc, and 1200cc Sportsters.
95224
6213
Drag Pipes-Cycle Shack-Sportster 1986-03
Preston’s Sportster Slip-On Mufflers
Mufflers include removable baffle set. One bolt for quick
removal.
94772 1980-03
94773 2004-on
Cycle Shack’s 1-3/4” drag pipes for 1986-03 883cc, 1100cc,
and 1200cc Evolution engine Sportsters feature a true 40”
length with show-chrome, hidden channel mounts, and slashcut ends. Brake pedal stop incorporated into front pipe mount.
Bolts to stock mount bracket and uses stock flange rings,
gaskets, and hardware.
6213 1-3/4” Drag Pipes (PHD-102A)
Torque Tube Set
Features improved baffling and back pressure for XL slash
type mufflers with removable baffles. Use with slip-on mufflers
with 3” inner diameter.
27362 V-Slots
5-10
Sportster
XL Radii Curved Exhaust Headers
2” Diameter pipes for XL models 1986-06.
PCP
Application
95996 1986-06 (no sensors)
95998 2004-on bracket
Cycle Shack XL Pipe Sets 2004-13
Fits all 883 and 1200 models. Available in muffler or drag
pipe style. 1-3/4” Header set accepts factory heatshields. 2”
Headers are supplied with heatshield. Both 1-3/4” and 2” type
mount to factory support bracket. Muffler pipe sets feature
one piece construction and high flow rate baffles for outstanding performance.
1-3/4” Muffler Pipe Set
PCP
Style
95265 Taper (PHD-130T)
95266 SS (PHD-130SS)
Drag Pipe Set
95267 1-3/4” Slash cut end (PHD-131)
95268 2” Slash cut end (PHD-231)
95269 1-3/4” Straight cut end (PHD-131-S)
Wyatt XL Side by Side Pipes 2004-on
Fits XL and XLC models with forward controls. Pipes are
1-3/4” at head and 2-1/4” at end and includes baffle set and
bracket.
PCP
Type
Years
95995 Straight 2004-06
95999 Slash
2004-06
95971 Slash
2007-on
Preston XL 1986-03 Chrome Covers
For Cycle Shack drag or muffler style pipes
94027 Set
Down Slash Slip-on XL Muffler Set
Chrome mufflers for 2004-13 Sportster with down slash ends.
Features 13” baffles cross tube nipples to connect to OEM
bracket and installs to stock header pipe. Set of two.
95742
5-11
Drag Pipes
All Cycle Shack Drag Pipes have slotted mounts
on rear of pipe. Must use mount brackets on page
5-18. (Not supplied with Cycle Shack Drag Pipes)
Cycle Shack Pipes for Evolution Engines
1-3/4”
2”
Fitment
Length
6213
-
1986-03 EV XL Drags
35”
643664371984-* FXR’s ONLY
38” 95234952351984-86 FX, 4-speed FXST 38”
1984-06 FXST, FLST
95195
-
1991-FXDB Sturgis
36”
Muffler/Drag Pipe Heat Shields
94020 Smooth BT Evo
94021 Perforated BT Evo
94024 Ribbed BT Evo
94025 Smooth XL 1986-03
Billet End Tips
Fits 1-¾” straight cut drags.
PCP
Finish
27137 Chrome
27138 Black
Preston Cycle’s Own 1-3/4” FXST Shot Guns
These pipes require “P” clamps (included) for mounting.
Chrome Drag Pipes
PCP
Model
Mounting
Length
95310 1984-99
Stock Tab
40”
Kreem Blue Shield
Evo Stainless Exhaust Taper Valve
27501 Pair
5-12
Blue Shield is an internal exhaust pipe sealant that is designed to prevent ‘pipe blueing’ on properly tuned motors.
Since blueing is caused by excessive heat, it may still occur if
an engine is not in proper tune or if the carburetor is jetted too
lean. Slight blueing may occur on pipes with extremely sharp
bends coming from heads. Install on new, clean pipes only.
78008 Each
Mounting Hardware
FXST, FLST Exhaust Support
Support mounts stock or custom drag pipes to frame. Stock
on FXST but can be used on Fat Boy to mount lower drag
pipes. PCP #82010 can be used on 1995-on models to mount
early style Porkster or Cycle Shack drag pipes.
PCP
Application
82010 FXST, FLST 1984-94, black (65459-84A)
82011 As above, chrome
82012 FXST, FLST 1995-99, chrome (65459-95)
82013 FXSTF-N 1995-on, chrome (65515-95)
24043 Chrome bolt kit
Cycle Shack Mounting Brackets
1999-05 Dyna Chrome Exhaust Support
Replaces 65548-99
27364
Exhaust Cross Over Bracket 1995-08
27468 Touring 1995-08
Supports are available to fit Cycle Shack’s muffler and drag
pipes. A universal strap bracket is also available to fit most
other pipes. Black finish.
PCP
Application
6650 FXE PHD-115/PHD-215 series muffler and PHD-
108 and PHD-208 drag pipes (BK-2)
6651 FLH electric start only PHD-118 series (BK-3)
6652 XL PHD-112 and PHD-117 series mufflers and PHD-110 and PHD-210 drag pipes (BK-4)
6653 Late FLH’s with kick and electric start PHD-103 and PHD-120 drag pipes (BK-5)
27007 12” Strap bracket for rear pipe on PHD-121 series muffler and PHD-111 and PHD-113 series Shotgun pipes (BK-6)
6654 Early FLH PHD-125 series pipes (BK-7)
27008 For use with front pipes from these FXST Shotgun pipes and headers: PHD-114GT, PHD-114GF, PHD-
214GT, PHD-201G, PHD-101G and PHD-222 (BK-8)
27006 Dyna 1991-on PHD-129 and PHD-149 pipes (BK-9)
27009 FLST 1995-04 PHD-128 and PHD-147 (BK-11)
732
Pair of 12” long universal strap brackets to fit other pipes for the H-D 74” engine produced with mounting studs. Not for use with adjustable channel mount. (BK-74)
Exhaust Port Stud and Nut Kit
72188 For Evo and Twin Cam
T-Bolt Set
Offset Bracket
For exhaust systems.
730
For use with muffler pipes that have channel type mounting.
Includes nut.
797
5-16 x 18 bolt set (pair)
807
FXR T-bolt set (4 pack)
5-13
Baffles & Clamps
Pipe Baffles (Pair)
Fits inside straight pipes, sold in pairs. Note: Baffle size denotes size of pipe into which it fits.
PCP
Size Length
27360 1-3/4” 8”
27361 2”
8”
27537 2-1/4” 6”
Frame Mounting Clamp
1” Frame clamp for mounting exhaust pipes or foot pegs. Sold
in pairs with hardware. Chrome plated.
16203
Chrome Plated Pipe and Muffler Clamps
Chrome Plated Muffler Hanger Clamps
Feature 4-1/2” long strap to mount muffler body to frame. Sold
in pairs unless noted.
3075 1-7/8”
3076 2-1/2”
3077 2-3/4”
3066 2-7/8”
3078 3”
3080 3-1/2”
3081 3-7/8”
Short Strap as OEM Bracket
2549 2-7/8” Chrome (each)
3079 3-1/4” Chrome (pair)
3095 3-1/4” Stainless Steel (each)
94201 3-1/4” Chrome (each)
Sold each except where noted.
PCP
Size
PCP
774
1-1/4” 629
775
1-3/8 3768
627
1-1/2”
776
1-5/8”
628
1-3/4”
Size
1-7/8” (pair)
2”
Chrome 1-7/8” ID Muffler End Clamps
Smooth clamps are extra thick for clamping mufflers to
1-3/4” O.D. exhaust pipes. Sold in pairs.
16336
Steel Pipe Baffle Set
for 2” Diameter Pipes
Chrome Smooth Clamps
Use these clamps to connect 1-7/8” O.D. mufflers to 1-3/4”
head pipes. The edges are radiused and blend into pipes.
Pinch clamp design with allen bolt for tight fit. Pairs.
16337
5-14
Pipe baffles fit inside straight
pipes. Baffles are 4” long and
fit pipes with 2” diameter.
27344
Baffles & Clamps
Cycle Shack “SS” Muffler Pipe Baffle
Mini Pipe Baffles 4”
Short length, full performance, all steel baffles, sold each.
3317 1-3/4”
831
2”
Fits all “SS” style muffler pipes with 2-3/8” I.D.
3315 Sold Each
12” Drag Pipe Baffles
Chrome “P” Clamps
Clamps are made of cold rolled steel and are 1/8” thick and
7/8” wide. The adjustable flat bar of the clamps measures approximately 6-1/2”. Sold each.
PCP
Size I.D.
787
1-1/2”
788
1-3/4”
778
2”
59369 2-1/4” (pair)
These replacement drag pipe baffles are extra long, sold
each.
3556 1-3/4”
3557 2”
Chrome Universal Flat
Straps
PCP
580
632
581
Size
3” (each)
6” (each)
8” (pair)
Power Spiral Baffles
Feature tha latest designs in exhaust baffles. The minimum
restrictive properties of the inverted cone allow for more
power and yet still reduce decibel number to acceptable level.
8”
12”
Size of Pipes
73634736781-3/4”
73635736792”
73636736802-1/4”
Chrome Centre Hangar Clamps for Mufflers
Clamps fit muffler OD sizes as noted. Sold in pairs.
Mounting tabs must be drilled.
PCP
OD Size
94202 3”
94203 3 1/4”
94204 3 1/2”
5-15
Mufflers
Custom Black Slip-On Muffler Set
Black 16-½” long tapered muffler set with an inner diameter of 1-3/4”.Features channel mounts, removable baffles,
chrome end clamp set and chrome undrilled mount strap. Inlet
clamps must be purchased separately.
95725
95740
Chrome Slip-on Muffler Sets XL 2007-on
PCP
End Caps
95740 Chrome tapered ends
95738 Black gun barrel
Chrome Billet Scalloped Pipe Ends
For 2-1/4” straight pipes. Sold in pairs.
59251
Chrome Clamps for Late 1985-94
Chrome steel muffler clamp is an updated version replacing
65722-85. Fits all late 1985-94 FLT/C, FLHT/C.
16261 Each
Chrome Frame Clamp
Fits frame for exhaust bracket
mounting. Each.
PCP
Size
73569 1”
73570 1-1/8”
FLT Muffler Clamps
Choose body or inlet clamps for 1980-up when installing custom mufflers, sold in pairs.
PCP
Item
Finish
Year
16233 Inlet Clamp
Stainless 1985-94 (65722-85)
3487 Wide type
Chrome 1985-94
16229 3” I.D. Body clamp Chrome 1985-on
23018 Rubber mount
Black
1985-on (65724-85)
5-16
Fishtails & Tips
Fishtail Mufflers - Chrome
Fishtail Tips
Chrome exhaust tips slip over the outlet of the muffler or
straight pipe. Available in 1-3/4” inlet diameter, these classic
fishtail tips measure 7” long and 5-5/8” high. (Sold each).
3774 Fishtail 1-3/4” dia. x 7” Length - Fits 1-3/4” Pipe
2-3/4” diameter with inlet to fit 1-3/4” O.D. pipes. Steel baffle
core. Clamps sold seperately.
6351 30” long (each)
6352 36” long (each)
95751 31” 1985-94 FLT (pair)
3077 Body clamps (pair)
629
End clamps (pair)
16261 FLT End clamps (pair)
Chrome Tapered 27” Fishtail Muffler
Features 1-3/4” inlet. Uses 2-1/2” body clamps, sold separately, for mounting.
95752 Pair
Unbaffled Fishtail Straight Pipes
94005 30” FLT 1985-94 w. welded brackets (pair)
94006 30” FLT 1995-on (pair)
94022 30” FLT 1995-on with channel brackets (pair)
Chrome 30” Straight Pipe Extension
Has 1-7/8” I.D. to fit over 1-3/4” pipes. Allows extension to
slide over to desired length. Pair.
94007
Classic Fishtail Muffler
Show-chrome muffler with an antique style tip. This clean,
bracketless muffler allows left or right side mounting and has
a 1-3/4” inlet. 34” long with 2-1/2” body O.D.
6507 www.prestoncycle.com
5-17
Mufflers
Chrome Universal Turnout Mufflers (19.5”)
Mufflers have a 1-3/4” I.D. inlet and feature a channel type
mount track on the rear of the pipe.
PCP
Length Outside Diameter
94770 20”
2-1/2” (each)
94768 20”
2-1/2” (pair)
1-3/4” Slip-on Muffler (20”)
Chrome muffler features megaphone styling with universal
mount bracket included.
94769 Each
Slash Down Muffler
Features removable baffles which can be modified for alternate tuning characteristics. Mufflers bolt to original bracket on
1995-on FLT touring models. 32”L with 3.5” O.D.
PCP
Fits
95771 1995-08
95772 2009-on
XL Slip-On Muffler Sets with Removable Baffle
RMB Style mufflers include removable baffle set. One bolt for
quick removal. OAL 18”, ID 1-3/4”, OD 2-1/2”.
94772 1980-03
94773 2004-on
16283 RMB style clamps for above
Scalloped Fishtails
2:1 Collector Muffler
Muffler has a 1-3/4” inlet, 3” body diameter and is 29” long.
Fits to most parallel exit pipes. Turnout end may be rotated to
desirable position.
94771
5-18
Chrome mufflers have a 1-¾” inlet and offered with 2 body
sizes. Includes end clamp. (sold each)
PCP
Length Muffler O.D.
94775
30”
2-7/8”
94776
22”
2-1/2”
Mufflers
Cycle Shack Replacement Mufflers 1995-99
Light weight, 2 1/2” O.D. slip-fit replacement mufflers for
1995-99 FXST, FLST, FLSTF, and FLSTN “Fatboy” models;
feature an all-steel core that will not burn out. 1995-99 models
bolt to OEM bracket #65459-95.
Sold in pairs
PCP Style
Description
94750 Tapered FXST-FLST 1995-99
94754 Tapered FLSTF/N “Fatboy” 1995-99
94755 Baloney FLSTF/N “Fatboy” 1995-99
94756 Turn-outs FLSTF/N “Fatboy” 1995-99
Cycle Shack Mufflers for FXE and FXST-FLST
Replacement mufflers for the 1980-85 FX-FXE-FXS-FXEFFXB-FXWG and 1984-94 FXST-FLST Softail® models and
the new FLSTF Fat Boy® with staggered dual muffler pipes.
Features include lighter weight, 2-1/2” O.D. muffler with an
all-steel core that will not burn out. Mount tabs bolt directly to
the factory pipe bracket. Uses stock clamps.
Sold as a set of 2.
3520 Turn-Out Mufflers (MHD-134TO) 1984-94
3522 Tapered Mufflers (MHD-134T) 1984-94
3524 Baloney-Slice “SS” Mufflers (MHD-134SA) 1984-94
94765
94763
Replacement Slip On Mufflers
Low restriction mufflers are available in Tapered, ‘SS’ or Turnout styles and feature easy installation to factory support and
head pipes. Pairs. 2000-06 FXST shown.
FXST, FLST FLSTF
1984-94
FX, FXE, FXS, FXWG
1980-85
94764
FXR, FXRS, FXLR
1982-86
3536
3538
3534
Tapered
SS
Turnout
FXR, FXRS, FXLR,
FXRT 1987-94
95715 Turnout
FXDB, FXDC 1991-05
95711 Tapered
95710 SS
ALL XL 1980-03
3528
3530
3526
Tapered
SS
Turnout
FLSTF, N 1995-99
94754 Tapered
94755 SS
94756 Turnout
3522
3524
3520
Tapered
SS
Turnout
FXST, FLST 1995-99
94750 Tapered
FXST, FLST 2000-06
FLSTF, FXSTD 2000-06 94763 Tapered
94766 Tapered
94767 SS
94764 SS
94765 Turnout
5-19
FLT-FLHR 1985-later
95102 PHD-126SS, Slash Muffler Pipes
1-3/4” Muffler Pipes-Cycle Shack 1985-94
These staggered duals for 1985-94 FLT-FLHS-FLHTC,
and FLHR models with rubber mount Evolution® engines
are available in 2 muffler styles, “SS”, and turn-down. Each
features Cycle Shack’s all-steel baffle that will not burn out
and get louder. Rear pipe mounts to original factory hanger
located under luggage. Frame mounting hardware for front
pipe is included.
95102 Baloney-Slice “SS” muffler pipes (PHD-126SS)
95103 Turn-Down muffler pipes (PHD-126TD)
Note*** These pipes do not fit models with oil tank under the
transmission.
Wide Oval Mufflers FLT 1995-on
Oval shape mufflers measure 2.5” by 5”Bafflers are included.
End clamps must be purchased separately.
95758
FLT Muffler Gasket 1985-on
25226 65721-92
5-20
S&S SPO Touring Mufflers 1995-13
These sculpted alloy, double-walled mufflers are mellow when
you want them to be but offer a throaty big-block rumble when
you get on the throttle. Offers significant torque gains in the
mid range and are a great choice for long-distance and twoup riding. Fits 1995-2013 Touring models with non-catalyst
mufflers. (Except 2010 Road Glide Custom, Street Glide and
all Tri Glide models) Features visible machined-in S&S logo.
PCP
Style
5500246 Chrome with black Xylan coated end caps
5500001 Chrome with chrome end caps
5500146 Jet-Hot black ceramic finish with chrome end caps
Touring Mufflers
95757
Touring Muffler Sets for 1995-on FLT
Features 3.5” body diameter.
PCP
End Caps
95703 Black short slash tips
95705 Black long slash tips
95712 Shooter style end types
95713 Cone end
95757 Shark end cap
Radii Chrome Muffler Set for 1995-on FLT
4” O.D. pipes feature removable gun barrel style end caps.
PCP
End Caps
95717 Black tips
95718 Ball milled
95719 Black barrel
Chrome 4” Cone End Muffler for 1995-on FLT
Touring Bullet Muffler Set for 1995-on FLT
Chrome 28-5/8” one piece bullet muffler features a nonremovable baffle with 2-3/4” diameter.
95714
4” O.D. chrome mufflers feature a tapered con end and are
sold each.
95713
17305
Chrome Muffler Set for 1995-on FLT
4” O.D. pipes feature removable cone style end caps.
95720
Namz Oxygen Enrichment Device
Muffler Bracket
Cover Set
Fits 4” outside
diameter muffler on
Touring models.
44030
Recommended for bikes with high flow air cleaners and
performance exhaust systems. Reduce engine operating
temperature between 20-30°. Just simply plug this in between
oxygen sensor and wiring harness. Pair.
PCP
Application
17305 2007-08 FLT, 2007-11 FLST, FXST models with Stage 1 kit installed. Works with stock ECM.
17306 2010-on FLT, 2012-on FLST, FXST models with Stage 1 or Stage 2 kit installed. Works with stock ECM.
17307 2007-on XL
5-21
Mufflers
FLT 2 3/8” Dumper Straight Pipe Sets 1985-on
Fits FLT models and includes baffles. End clamps are sold
separately.
PCP
Description
95728 Pipe set 1985-94
95727 Pipe set 1995-on
27365 Baffle set 1985-on
16261 End clamp 1985-94
628
End clamp 1995-on
Samson Big Guns II- Touring
Features 1-3/4” head pipes with 2-3/4” full coverage heatshields. All Big Guns II comes complete with mounting
bracket and hardware.
95982 Fits Long Shots Slip-Ons
Cycle Shack Fishtail Rocket Tip Muffler
29” Chrome muffler with fishtail rocket tip.Each.
95716 Touring 1985-94 (MHD-290-R)
RMB Slip-On Muffler Sets for FXD-FXDWG
RMB styles include removable baffle set with one bolt for a
quick 30 second removal. Install with stock header pipes.
Mufflers a fit 1995-on FXD-FXDWG models.
PCP
Years
95708 1995-06
16283 Clamp set
5-22
Touring Black Muffler Set for 1995-on FLT
Black muffler set with removable end caps has a 4” outer
diameter.
95756
FLT-FLHR
FLT Touring Dual Exhaust L1985-08 (USA)
Note specific year fitment
# PCP
OEM
1162819955
2 16282 65276-62
16283 65296-95A
3 79467 65324-83A
79468 65324-83-A
4 11105 65325-83A
4a 753
5 16284 65328-83
6 16286 65502-89
16283 65283-94
7 16287 65519-52C
16342 65654-97
8 N/A
65538-95
N/A
65539-95
9 N/A
65621-83
95753 65621-99A
95759 65621-07
10 45147 65630-83B
11 N/A
65626-85A
12 95762 65627-95A
95755 65627-99A
95761 65627-07
Description
Clamp, shield 1984-on (ea)
Muffler clamp 1984-94 (ea)
Muffler clamp 1995-on (ea)
Gasket, exhaust port 84-91 (10 pk)
Gasket, exhaust 1992-08 (5 pk)
Snap ring, exh/gask. 84-on (10 pk)
Exhaust flange kit (4 pcs)
Clamp, exh/manifold 1984-on (ea)
Clamp, left exhaust pipe 89-94 ea
Clamp, pipe to bracket 86-06 (ea)
Clamp, exhaust pipe 2007-08
Muffler, left 1995-03
Muffler, right 1995-03
Exhaust pipe, right front 1984-97
Shield, front exh/pipe 1984-08
Exhaust pipe, right rear 1985-94
Exhaust pipe, left 1995-98
# PCP
OEM
13 45937 65632-83B
45567 65951-98A
14 94010 65634-81C
15 45149 65634-92A
45568 65634-98A
15A45936 65611-92
45211 65611-95
45569 65952-98A
1645216 65636-85
45158 65636-95
45570 65636-99
17 16289 65645-89
18 45159 65647-83
45575 65636-07
19 16290 65678-85D
16338 65619-98
16343 65678-07
16344
65988-07A
2079469 65721-85
21 16233 65722-85
16283 65296-95A
22 16291 65723-85
23 23018 65724-85
- 14602 27714-06
- 29145 27719-07
Description
Shield, rear exh/pipe 1984-97
Shield, rear exh/pipe 1998-08
Shield, right exh/pipe 1981-91
Shield, right exhaust (rear) 92-94
Shield, L/S rear exh/pipe 1985-94
Bracket, left rear exh/pipe 1989-94
Shield, left top exhaust pipe 83-98
Shield, left rear exh. pipe 2007-08
Bracket, right rear exh/pipe 85-06
Brkt tab, exh. mnt. at starter 07-08
Bracket, rear exh. mount 2007-08
Brkt, exh. mnt. at starter 2007-08
Gask., muffler clamp L85-94 (10)
2-pc Muffler clamp L1985-94 (pr)
Mounting bracket L1985-on (ea)
Mount (rubber) L1985-on (pr)
Seal ring 2007-09 (10 pack)
Oxygen sensor 2007-09 (ea)
Muffler Joint Gasket
Fits FLT 1985-94 and replaces 65721-85.
25226 5 pack
5-23
Mufflers
Cycle Shack 4” O.D. Touring Mufflers
Cycle Shack 4” O.D. Touring Mufflers
Get a performance increase on FL, FLH, FLHR, FLHX, FLTR,
FLHT Touring models from 1995-11 and will work with OE
factory Y-pipe head pipes or Cycle Shack’s Dresser Duallies
(PHD-120, Preston #95860). Feature performance baffles and
offer a deep throaty note that is mellow while cruising.
PCP
Type for 1 3/4” head pipes
95721 Slash up (MHD 482 SU)
95722 SS (MHD 482 SS)
95723 Slash down (MHD 482 SD)
95724 Straight (MHD 482 ST)
95773 Oval (MOV-492)
Get a performance increase on FL, FLH, FLHR, FLHX,
FLHT Touring models from 1995-10 and will work with Cycle
Shack’s 2” head pipes (PHD-221, Preston #95863 and PHD259, Preston #95862). Feature performance baffles and offer
a deep throaty note that is mellow while cruising.
PCP
Type for 2” head pipes
95798 SS (MHD 484SS)
95797 Slash down (MHD 484SD)
95799 Straight (MHD 484ST)
Cycle Shack 3”O.D. Touring Mufflers 1985-on
2 Piece endcap replacement mufflers are designed to fit the
1985-on FLT, FLHT, FLHT/C, FLHR Dresser models with
Evo and Twin Cam motors. MHD-290 and MHD-291 Series feature an all steel performance baffle. MHD-289 and
MHD-292 Series feature a woven stainless steel wool sound
blanket around the baffle that cancels the sharp crackle in the
exhaust note. The tone is till deep and throaty, but the baffle
allows you to hear your stereo and works better with EFI TC88 motors. Fits OE crossover “Y” pipe and bolts directly to OE
saddlebag frame hangers. MHD-289/290 series mufflers are
designed to fit 1985-94 models with OE flared end head pipes
and OE coupler clamps. Sold in pairs. Clamps not included.
PCP
Fits
All Steel Performance Baffle
95776 1985-94 SS (MHD-290SSA)
95778 1985-94 Slash down (MHD-290SD)
95783 1995-on SS (MHD-291SSA)
95785 1995-on Slash down (MHD-291SD)
PCP
95775
95777
95784
95786
5-24
Fits
1985-94
1985-94
1995-on
1995-on
Woven Stainless Wool Baffle
SS (MHD-289SSA)
Slash down (MHD-289SD)
SS (MHD-292SSA)
Cycle Shack 3”O.D. Touring Mufflers 1985-on
2 Piece end cap mufflers. MHD-289 and MHD-292 Series
feature a woven stainless steel wool sound blanket around
the baffle that cancels the sharp crackle in the exhaust note.
The tone is till deep and throaty, but the baffle allows you to
hear your stereo and works better with EFI TC-88 motors.
Fits OE crossover “Y” pipe and bolts directly to OE saddlebag
frame hangers. MHD-289/290 series mufflers are designed
to fit 1985-94 models with OE flared end head pipes and OE
coupler clamps. Sold in pairs. Clamps not included.
PCP
Fits
All Steel Performance Baffle
95780 1985-94 Rocket tip fishtail (MHD-290RA)
95782 1985-94 Turn out/down (MHD-290TOA)
95787 1995-on Rocket tip fishtail(MHD-291RA)
95789 1995-on Turn out/down (MHD-291TOA)
PCP
95779
95781
95788
95790
Fits
1985-94
1985-94
1995-on
1995-on
Rocket tip fishtail (MHD-289RA)
Turn out/down (MHD-289TOA)
Rocket tip fishtail(MHD-292RA)
Turn out/down (MHD-292TOA)
Duallies
Cycle Shack FLT 2”OD Dresser Duals
Feature a stepped header pipe that exists on each side of the
bike. Offers increased flow and performance for large displacement motors. Eliminates OEM rear cylinder Y-pipe. Fits
2007-on models. Order muffler separately.
PCP
Description
95849 Header set
95775 “SS” style muffler
95776 Straight cut muffler
Cycle Shack 1¾” Dresser Duallies with Slip-Fit
Mufflers for Touring Models 1985-2008
These Dresser Duallies feature individual (PHD-120) hea
pipes with O2 sensor bungs and eliminate the Y-pipe on the
rear cylinder (OE crossover pipe) and are designed to fit
1985-on FLT, FLHT/C, FLHS and FLHR Road King models.
Order head pipes and mufflers separately. Mufflers are
available with SS (slash cut) and SD (slash down) style ends.
These 3” O.D. touring mufflers attach to the OE saddlebag
frame hangers. PHD-291 series features Cycle Shack’s all
steel performance baffle. PHD-292 series are a quieter muffler with less crackle due to their s/s wool sound blanket that
lets you hear your stereo.
Duallies
95860 1985-08 PHD-120 Head pipes only (no flare end)
One Piece Mufflers
PCP
All Steel Performance Baffle (Pairs)
95783 SS (MHD-291SSA)
95785 Slash down (MHD-291SD)
PCP
95784 SS (MHD-292SSA)
95786 Slash down (MHD-292SD)
Two Piece End Cap Mufflers
PCP
All Steel Performance Baffle (Pairs)
95787 Rocket tip fishtail (MHD-291RA)
95789 Turn out/down (MHD-291TOA)
PCP
95788 Rocket tip fishtail (MHD-292RA)
95790 Turn out/down (MHD-292TOA)
Tech Note: #95860 When used with 1995-on mufflers will
update the 1985-94 flared pipe style.
Cycle Shack 2” O.D. Dresser Duallies for
Touring Models 1995-08
These 2” O.D. Dresser Duallies stepped crossover head
pipes offer increased flow and performance for large displacement motors (95c.i.+). They feature individual 2” O.D. stepped
head pipes that exit on each side of the bike for a traditional
Touring bike look and O2 sensor bungs. They eliminate the
OE rear cylinder Y-pipe. The MHD-320/MHD-324 series mufflers are matched with these 2” O.D. head pipes and feature a
high-flow2” O.D. baffle. The MHD-324 series mufflers feature
a stanless steel sound blanket baffle so you can hear your
stereo. Head pipes and mufflers sold separately.
PCP
Type
95863 Head pipes (PHD-221)
PCP
95791
95793
95795
2” Mufflers with Steel Baffle
SS (MHD-320SS)
Straight (MHD-320ST)
PCP
95792
95794
95796
2” Mufflers with Stainless Steel Blanket Baffle
SS (MHD-324SS)
Straight (MHD-324ST)
5-25
True Dual Exhaust
Cycle Shack 1¾” Dresser Duallies for Touring
Models 2009-on
True dual, 2-into-1 separate headpipes replace the OE 2-1
header on 2009-on FLH, FLHR, FLT, FLHX models to help
relieve excess heat under the riders right leg. They reuse the
OE factory heatshields. Full 1¾” O.D. headpipes including
the crossover pipe on the front cylinder for improved flow and
performance.
95861 (PHD-159)
Cycle Shack 2” Dresser Duallies for Touring
Models 2009-on
True dual, 2-into-1 separate head pipes replace the OE 2-1
header on 2009-on FLH, FLHR, FLT, FLHX models to help
relieve excess heat under the riders right leg. Full 2” O.D.
stepped head pipes provide increased flow and performance
on mototrs over 100 c.i. Reuses OE heat shields on head
pipes and is supplied with lower heat shield and left side
crossover heat shield. Should be used with MHD-484, MHD320 or MHD-324 series Cycle Shack mufflers with 2” O.D.
baffles.
95862 (PHD-259)
Paughco 1-¾” 2007 Touring Exhaust Systems
Head pipe sets fit 2007 FLT, FLHT and Road King models.
Heat shields are recommended.
PCP
Item
95819 2-into-1 head pipes only
95820 Independent dual head pipes only with a crossover bracket
95821 Crossover dual head pipes only with a crossover bracket
Heat Shields
94052 Front heat shield
94029 Low front shield with notch for #95819 and #95821
94053 Low front shield without notch for #95820
94054 Rear shield for #95819
94056 Crossover shield for #95820, #95821
94057 Snail shield for right side rear cylinder on #95820
Oxygen Sensor Plug
Fits exhaust F/R fitting on 2007-on
XL and front 2007-09 FLT.
PCP
Item
73734 Plug (pair)
29145 Sensor (ea)
5-26
Touring
Paughco Touring Mufflers 1995-07
Extensions and mufflers are intended for use on 1995-07
Touring models. All measurements listed are overall length.
Sold each.
1-7/8” Diameter Straight Fishtails
PCP
Length Type
95767
31”
Fishtail
16346 Hanger clamp
3” Diameter Mufflers
Require no additional brackets for installation.
PCP
Length Type
95768
31”
Rocket
95769
31”
Fishtail
95770
30”
Tapered
Paughco 1-¾” 2-into-1 Header Pipe Set
Paughco 1-3/4” Touring Exhaust 1995-2006
Head pipe sets fit 1995-2006 FLT, FLHT, FLHS and Road
King models. Heat shields are recommended.
PCP
Item
95808 2-into-1 head pipes only
95841 1995-98 Independent dual head pipes only with a crossover bracket
95856 1999-06 Independent dual head pipes only with a crossover bracket
95817 Crossover dual head pipes only with crossover
bracket
Heat Shields
94029 Low front shield with notch for #95808 and #95817
94053 Low front shield without notch for #95841 and #95856
94056 Crossover shield for #95841, #95856 and #95817
94057 Snail shield for right side rear cylinder on #95841 and #95856
Chrome header pipe set only. Includes angle bracket for
mounting front pipe. Fits TC Softails 2000-06. (733C8)
95813
Hanger bracket for tail pipe extension must be manufactured.
Oxygen Sensor Reducer Plug Set
Allow the use of late type 12mm oxygen sensors in earlier
exhaust pipes with 18mm sensor bungs.
17319
5-27
Touring
Paughco Rocket Mufflers Touring L1985-94
No additional brackets required for installation. 3” Diameter
rocket muffler measures 31” long.
95763
Rocket muffler (each)
16345
V-clamp for late 1985-94
Paughco Touring Mufflers 1985-94
Paughco 1-3/4” Touring Exhaust L1985-94
Head pipe sets will fit all L1985-94 Evolution FLT, FLHT and
FLHS and Road King models. Heat shields are highly recommended.
PCP
Item
95805 2-into-1 headpipes only
95807 Independent dual headpipes with crossover bracket
95816 Crossover dual headpipes with crossover bracket
Heat Shields
94056 Crossover shield for #95807 and #95816
94057 Snail shield for right side rear cylinder on #95807
3” Diameter mufflers are intended for use on late 1985-94
Touring models and bolt right on with no additional brackets
required. All measurements listed are overall length. Sold
each.
PCP
Length Type
95764 29”
Fishtail
95765 29”
Tapered
95766 31” Fishtail
16345 V-Clamp
NEW ITEM
COMING SOON
FLT Exhaust Header Pipes
Dual Cross Over FLT Exhaust Systems
Touring exhaust system includes headers heat shields, brackets and slash down mufflers with removable baffles.
PCP
Year
95864 1995-06
95865 2007-08
95866 2009
95867 2010-on
5-28
PCP
95736
95734
PCP
95726
Front Header Pipes
2010-on FLT, FLHT, accepts 12mm O2 sensors
1995-06, will require oxygen sensor plugs (chrome)
Rear Header Pipes
2009-on FLT (chrome)
True Dual Exhaust
Radii True Dual Kit for Touring Models
Includes chrome true dual crossover kit with clamps and wide
oval muffler set.
PCP
Item
95858 1995-06
95859 2007-08
95850 2009
True Dual Chrome Exhaust Systems-Paughco
These systems feature a single pipe for each side. Each pipe
is independent, rear pipe for the left and front pipe for the right
without intersection. 1-3/4” O.D. Order 2 piece heat shield set
separately.
PCP
Application
Heat Shield
95841 1985-98 FLT
94044
95856 1999-06 FLT
94044
95842 1986-94 FXST-FLST
94045
95843 1995-99 FXST-FLST
94045
95844 2000-06 FXST-FLST
Stock Type 2 into 1 - Chrome Pipes
1984 Evolution type fits FXST 1985-99 and FLST 1986-99
when early FL look is desired.
95802 1984-99 FXST-FLST
45562 Chrome rear heat shield for #95802
95803 1984-94 FXR-FXRS
95805 1985-94 Evo FLT
95842 left side view
NEW ITEM
COMING SOON
Chrome Crossover Exhaust Header System
Features removable brackets. Accepts oxygen sensor. Fits
FLT 2010-on.
95830
VT True Dual Cross Over Header
Oxygen Sensor Harness
For 2009 FLH models with header set. Complete with front
extension harness and a pair of reducing bungs. Bungs have
an 18mm O.D. and a 12mm I.D.
28799
Fits FLT, FLHT, FLHR, FLTR. Heat shields, clamps, and hardware are included. Order 1995-06 type muffler separately.
PCP
Item
95852 1995-06 Header pipes
95857 2007-08 Header pipes
95851 2009 Header pipes
95848 2010 Header pipes
5-29
Dual Exhaust
Chrome Dual Pipe Cross Over Systems-EVO
Less Mufflers and Shields
95814 FXST-FLST 1984-99
95818 FXST-FLST 2000-06
95816 FLT 1985-94 95817 FLT 1995-06 Heat Shield
94037
Chrome Dual Crossover Headers by Run Roader for 1984-99 FXST-FLST
94039
94040
1-3/4” Pipes come with 2 chrome heat shields, 2 aircraft style
clamps for pipe junctions, 2 heavy duty muffler mounting
brackets and a replacement, chrome shifter linkage rod. Uses
stock exhaust port rings and retainers and can install any 13/4” muffler pipe on the system. Note: Installation of left side
muffler mounting bracket requires drilling and tapping of lower
frame boss.
95814 1984-99
Chrome Universal Heat Shields
Stylish shield feature a groove or flame design.
Groove Flame Size
59695
-
4”
-
59699
6”
FLT Extended Front Exhaust Heat Shield
Covers the exposed exhaust pipe adjacent to rider footboard.
Mounts with existing hardware. 65694-05A.
59702 1983-99 FLT models
82108 2000-on T/L
Maltese Chrome Heat Shield
45157 9” Long
Chrome Skulls Heat Shield
45162 9” Long
5-30
Exhaust
Billet Pipe Ends for 2.25” Straight Pipes
PCP
Finish
21682 Chrome
Chrome Universal Straight Heat Shields
Heat shields include mounting clamps and are available for 1
3/4” or 2 1/4” pipes. Sold each.
For 2 1/4” Pipes
45206 4” heat shield
For 1 3/4” Pipes
Six Gun Pipe End Set
Tips fit pipes with full coverage heat shields over 1-3/4” pipes.
PCP
Fits O.D.
59877
2-¼”
27243
1-¾”
2 Stage Torque Baffle Set
4 Piece set allows variation of air flow for 2-1/4” pipes.
59597
Chrome Billet Aluminum Custom End Caps
Fits all 2.25” pipes.
73562
2-3/8” Torque Tube Set
Features improved baffling and back pressure for FX, XL and
FXD Screamin’ Eagle muffler sets.
27538
5-31
Heat Shields
Chrome FLT Stock Heat Shields for 1983-on
PCP
45147
45148
45159
45216
94010
45149
45936
16281
Application
(A) 1983-on Front head pipe (65630-83C)
(B) 1984-97 Rear head pipe (65632-83C)
(C) 1983-on Left top (65647-83)
(D) 1985-94 Left rear (65636-85)
(E) 1981-91 Lower (22 1/2”) (65634-81C)
(F) 1992-97 Low right (65634-92)
(G) 1992-94 Low right rear (65611-92)
(H) 1984-99 Clamp, (shield) (9955) (ea)
Sportster Exhaust Pipe Heat Shields 1986-03
Chrome covers for Stock or Drag pipes.
94025 Set
Drag/Custom pipes
94027 Set
Cycle Shack drag/muffler
45160 Front Cycle Shack shot gun pipe 1990-99
Evo FXST Muffler/Drag Pipe Heat Shields
94020 Smooth
94021 Perforated
94024 Ribbed
94004
3171
Chrome Heat Shields
3171 Front FLT 1981-91
94004 FXR equalizer 1983-on, FXST 1986-99
5-32
Universal Heat Shields
Fits 1-1/2” to 2-5/16” Pipes and includes clamps for installation. Sold each.
PCP Length Type
3760
9”
Perforated
45153
8” Flame
45244
9”
Flame
45154
11-½” Flame
Heat Shields
BT Exhaust Gasket Set BT 1985-on
Includes 2 snap rings.
25607
Chrome Rear Heat Shield
Shield is contoured to fit 1990-94 FLSTF with stock exhaust.
82087 65464-89
Mesh Exhaust Port Gasket 1999-on
25608 5 Pack
XL Heat Shields 1986-03
94025 Set for staggered duals
Chrome 2:1 Shield Set
Fits PCP #95802 1986-99 FLST exhaust.
45562
Heat Shield
Fits the lower part of the front pipe on FL crossover dual or
2-into-1 exhaust systems for Softail® models.
94011 10” Long with notch
1164
7” long
Chrome Front Muffler Pipe Junction Shield
PCP
Application
45556 1984-on FX , XL 1986-03
5-33
Exhaust Hardware
Exhaust Port Fasteners
The bolt holds the pipe secure, not merely by thread tension,
but clamps the pipe to the head by wedging the patterned
washers against the pipe while the washers are, in turn,
wedged between the pipe and the “E” clip locks fitted to the
bolt heads.
2017 Evolution Big Twin motors 1984-99
Evo Exhaust Flange Kit
Each kit includes: 2 chrome exhaust flanges, retaining rings,
exhaust gaskets and chrome acorn nuts and washers.
27202 BT 1984-on, XL 1986-03
Genuine James Exhaust Gaskets.
PCP 79467
79468
79469
79470
79472
Description
Pipe to head 1984-91 BT & XL Evo (65324-83) (10)
Pipe to head 1992-on BT & XL (65324-83-A) (5)
Muffler clamp 1985-94 all FLT (65721-85) (10 pk)
Inter connect 1982-94 XL, FXR (65781-82) (ea)
Inter connect 1991-02 Dyna (65826-90) (ea)
Stainless Steel Taper Valve Kit
Includes 2 stainless steel extruded sleeves to fit between pipe
and exhaust port. Aids in back pressure when range O.D.
or drag pipes are used. Kit includes solid copper machined
exhaust seals which will not restrict gas flow.
59370
James Evo Exhaust Nut Kit
Includes 4 chrome acorn nuts, 4 washers, and 2 mesh gaskets, for 1984-03 BT models.
79833
EVO Exhaust Port Gasket
Colony Exhaust Stud and Nut Kit
Fits Evo, Twin Cam models.
72188
Stainless outer body and “Crush”
fibre inner body
25225 Sold in 10 packs.
Exhaust Stud Kit
Includes 4 studs and 4 stainless
flanged nuts. Fits XL 1986-on and
BT 1984-96.
24071
5-34
Jims Exhaust Stud
Drill Fixture
Fits BT and XL 1984-on
exhaust ports to align for
the drilling of a broken
exhaust stud.
31524

EVTC Exhaust - PrestonCycle

Transcription

Similar documents

Q 0908 PE.indd - Waldron`s Exhaust

exhaust - Custom Chrome Europe

GV650 Exhaust Mod - Alternative Cruisers

The idea with modifying stock down pipes is to gut the pre

Installation Manual: PN- 316609 Single Sweptside Exhaust System

Exhaust

Vernalift Install Guidelines

Tailgunner Exhaust - Rob`s Dyno Service

Magnaflow `MagnaPack` (99-04 GT / Mach 1

Installation Instructions for the VMAX (2009-11)