and view our Acoustic Products

Transcription

AP1
Acoustic Wall Panel
These are highly effective acoustic treatment
solutions for rooms where 'full' cover treatments are
not desirable or affordable. They offer a high
performance solution to the control of room
reverberation and monitoring reflections using tried
and tested panel designs that we use in our studio
projects.
Standard stock size is 1200mm by 600mm (pictured) but
they can be manufactured to any size to fit individual
room requirements. Please ask for quotation.
Available in three standard models. AP1H High Band,
AP1W Wide band and the AP1L Low Band.
The AP1L model includes an additional internal membrane,
providing additional absorption at a specific low-frequency
(to be specified upon ordering - usually taken to be the
resonant frequency of the room).
Frame can be made from painted MDF, in a colour to be
specified, or can be made with a wood veneer finish in one
of the available species.
Front surface is finished with a fabric layer from the Cara
range.
Wall fixing kit supplied for flat walls. Uneven wall option or
ceiling option available on request.
Environmental Specifications
Weight (AP1H)= 9kg
Weight (AP1W) = 12kg
Weight (AP1L) = 15kg
Height = 1200mm
Width = 600mm
Depth (AP1H) = 63mm
Depth (AP1W) = 88mm
Depth (AP1L) = 113mm
Fabric detail available in any of these standard options
Timber finishes available in any of these standard species
ash
beech
cherry
maple
oak
walnut
The Studio People Ltd
Unit 5, Offas Dyke Lane, Four Crosses Business Park, Llanymynech, Powys, SY22 6ST, United Kingdom
www.studiopeople.com / [email protected] / +44 (0) 1691 830061
AS
Acoustic Standing Panel
AS is the next step up again from the ASP, this
standing panel is essentially just a movable
section of acoustic wall. Several of these can be
used together to provide massive control over
the acoustics of a room.
Standard design has hardwood veneered surface on
one side and a soft fabric finish on the other, allowing
for maximum acoustic flexibility – soft sides can be
used to create a dead-zone within a large live space,
or vice versa.
AS feet are sturdy but unattached – panel can be
lifted straight out for ease of storage.
AS1 is full height, AS2 is full height with vision
(pictured) and AS3 is half height. AS can also be
manufactured to individual specifications.
Exterior frame and feet are available either painted
or with a Hardwood Veneered finish in one of the
available species.
Soft side is finished with a fabric layer from the Cara
range
AS Absorption Coefficients
AS1 & AS2 Height = 2000mm
AS3 Height = 1000mm
Width = 1000mm
Panel Depth = 62mm
Foot Depth = 600mm - Foot Height 96mm
AS2 Glass Vision Panel = 926mm x 794mm (hxw)
AS1 Weight = 40kg
AS2 Weight = 45kg
AS3 Weight = 20kg
ash
beech
cherry
maple
oak
walnut
ASP1
Acoustic Swing Panel
The next step up from the AP1 Panel, our ASP1
Swing Panel Set is two full acoustic panels hinged
together along one long edge, allowing the set to
open like a book. Allows on-the-fly choice between
soft and hard wall surfaces. Several swing panels in
a room can provide a huge range of available
sounds.
When fitted, one leaf of the ‘book’ will be fixed to the wall,
leaving the second leaf free to swing into
the room. The front cover of the ‘book’ is a hard panel,
facing into the room when closed. Standard stock size is
1200mm x600mm (each leaf) but just like AP1, these can
be constructed to any requirement.
Hard surface on back of free swinging leaf (i.e. facing into
room when ‘book’ is closed) is available as painted or
veneered finish.
As per the standard acoustic panel, the Swing Panel set is
available in high, wide and low band variants, (note that
the thickness of the panel set will be twice that of the AP1
values when the set is closed). The ASP1L model includes
an internal membrane, providing additional absorption at a
specific low-frequency (to be specified upon ordering usually taken to be the resonant frequency of the room).
As with the AP1, frame can either be painted MDF in a
colour to be specified, or can be made with a wood veneer
finish in one of the available species.
Inside faces of both panels to be finished with a fabric
layer from the Cara range
ASP1 Panel Absorption Coefficients
ASP1H
ASP1W
ASP1L
Weight (AP1H)= 18kg
Weight (AP1W) = 24kg
Weight (AP1L) = 30kg
Height = 1200mm
Width = 600mm
Closed Depth (ASP1H) = 126mm
Closed Depth (ASP1W) = 176mm
Closed Depth (ASP1L) = 226mm
ash
beech
cherry
maple
oak
walnut
CD1
Ceiling Diffuser
CD1 is a simple yet effective curved panel for
ceiling mounting, above your mix position, or
anywhere that needs that extra touch of
diffusion.
CD1 was designed to diffuse coherent echoes from
large flat surfaces. CD1 is effective at reducing
standing waves often found in parallel floor to ceiling
arrangements. Not to say it has to be ceiling
mounted though!
CD1 operates primarily at mid to high band
frequencies.
Can be painted in any colour specified, or finished
with a hardwood veneer in one of our standard
species.
Weight = 18kg
Height = 2400mm
Width = 1200mm
Depth = 280mm
ash
beech
cherry
maple
oak
walnut
HCT
Hard Corner Trap
HCT is a heavy free standing unit designed to
neutralise low-frequency standing wave nodes,
often particularly problematic in room corners.
Consists of a front facing grid of holes, acting as a
Helmholtz Resonance trap, leading to a large cavity
filled with acoustically absorbent insulation.
Provides significant absorption of low-band sound,
centred around a particular frequency, defined by the
front grid spacing and to be specified upon ordering
– usually made to counteract the acoustic resonance
of the room.
Available in two models, HCT1 full-height or HCT2
half height. The HCT2 version comes with an
overhanging top plate, providing a small additional
shelf/surface. Both models available at 30 or 45
degree angles.
Can have painted or Hardwood Veneered finish, in
one of the available species.
HCT1 Height = 2000mm - HCT2 Height = 1000mm
Width = 750mm
HCT1 Weight = 65kg - HCT2 Weight = 32kg
ash
beech
cherry
maple
oak
walnut
PD1
Polycylindrical Diffuser
PD1 is a Wall mounted acoustic treatment unit
– large cylindrically curved wooden surface
filled with acoustic treatment foam.
Provides significant absorption and diffusion of a wide
range of frequencies, primarily mid- to high-band.
Very useful for preserving the reverberation time in a
room without introducing slap.
Available in half- or full-height versions. Half height
versions are ideal for mounting high on a wall,
allowing space underneath for furniture.
Heavy, sturdy construction – these will need solid
timbers within the wall to which they are to be
attached, or can be attached anywhere on a masonry
wall.
PPD1 has a perforated curved front panel, allowing
diffusion characteristics to remain while removing the
low end absorption properties of PD1.
Available as a painted finish or in any of the available
wood species.
Weight = 55kg
Height = 2000mm
Width = 1156mm
Depth = 285mm (at deepest point)
ash
beech
cherry
maple
oak
walnut
SWD1
Small Wall Diffuser
SWD1 is a smaller version of CD1, helping
diffuse sound around the room, and helping to
minimize standing waves.
SWD1 can be mounted anywhere. Ceiling or wall,
wherever you want it.
Provides excellent diffusion of primarily high band
frequencies. Very light and very versatile. Provides
a quick, cheap and flexible method of acoustically
treating a room.
SWD1's front panel features a grid of holes to aid
diffusion, and to reduce resonance of the panel to the
wall.
As SWD1 is supplied with button fixings, and due to
it's lightweight nature, SWD1 is simple to fix and
even remove. This allows more creative flexibility on
a session by session basis as it incredibly quick to
manipulate your room by
adding/removing/repositioning multiple SWD1's.
Weight = 2 kg
Height = 600mm
Width = 400mm
Depth = 63mm
Available in painted finish only.
Supply us with a paint code to have your exact desired finish.
VS1
Vocal Screen
VS1 is a mobile vocal screen, allowing almost
anywhere to be used for that impromptu vocal
take or voiceover.
VS1 will stand sturdy on a table top, could be hung
on a wall, or mounted at any height desired by using
three straight microphone stands. Adjust to your
preferred angle by adjusting the leaf panels and
you're set!
VS1 gives the 'dry' vocal sound people want,
minimizes off axis reflections and helps with rejecting
room noise.
VS1 when closed features hardwood veneered
panels, rubber feet and a sturdy yet comfortable
carrying handle on top.
When opened, VS1 offers a soft acoustic fabric
finished panel, in a choice of colours, to give VS1 a
professional feel, look and most importantly,
specification.
Exterior frame and feet are available either painted
or with a Hardwood Veneered finish in one of the
available species.
Closed
Height = 700mm
Width = 600mm
Depth = 102mm
Weight = 10kg
Soft side is finished with a fabric layer from the Cara
range.
Leaf Panels
Height = 700mm
Width = 300mm
Depth = 51mm
ash
beech
cherry
maple
oak
walnut

and view our Acoustic Products

Transcription

Similar documents

Building Code Training – August 30th at Burgundy Basin Inn

Hertco Express 20-DoorStyles_062013-A.indd

SoQi Bed Infrared Sauna Bed

Christmas Card order form15.pub - Little Sisters of the Poor Pittsburgh

GlASS FibER REiNFORcEd CONcREtE

TABLE TOP POP UP DISPLAY—QUICK START INSTRUCTIONS

European Network for Conflict Research (ENCoRe)

The Strongest Pole Buildings Anywhere!

MA6900

Hovrn onconarons - Home Decorators Collection

Vacancy Bulletin Powys LA