Model VSB-100 - Campbell

Model
VSB-100
Variable Speed Burnisher
The VSB burnishing machine is designed for polishing the edges of
small products made in leather or synthetic material. The machine
a variety of accessories for edge finishing such as milling wheels,
abrasive wheels, brushes, etc. to be chosen as per material to be
worked.
• Powerful variable motor speed
• Great for belt tips, bags, holsters,
saddle parts, raw edges, etc.
• Dust hood with port for exhaust
• Uses type AP wheels
• Wax sticks available in black,
brown & natural
• Made In USA
Specifications
Motor
Work Space
Weight
110v 1ph
9 x 10 x 20 in. (23 x 25 x 51 cm)
36 lbs. (16 kgs)
Type AP Burnishing & Abrasive Wheels
TAMP2111:
2 sheets cloth &
2 sheets split leather
TAMP21111: ... with
Wax
TAMP2100:
Cloth Wheel
TAMP2104: ... with Wax
TAMP2101:
Cloth &
2 sheets of leather
TAMP21101: ... with Wax
TAMP2112:
Dense Cloth Wheel
TAMP2102:
Full Leather Wheel
TAMM2000:
Blue grindstone
TAMP2103:
Felt Wheel
TAMP2105: ... with Wax
Burnishing Wax
STIK2120: Natural
STIK2121: Black
STIK2122: Brown
Abrasive Wheel
TAMM2046: 40 Grit
TAMM2080: 80 Grit
TAMM0120: 120 Grit
Bakelite Wheels
TAMP2108:
Wood Burnishing Wheel
TAMP2200: “V” grooves
TAMP275325: Dia. 2.75 & 3.25 mm
TAMP350400: Dia. 3.5 & 4 mm
TAMP450500: Dia. 4.5 & 5 mm
Diamond Chip Wheels
TAMP2109:
Split Leather
GF2200: Dia. 1 & 1.5 mm
GF275325: Dia. 2.75 & 3.25mm
GF350400: Dia. 3.5 & 4 mm
GF450500: Dia. 4.5 & 5 mm
Carbide Beveling Wheels
TAMP2110:
TAMF2007: 2.5mm Dia.
Cloth & 4 sheet of leather TAMF2009: 3 mm Dia.
TAMF2011: 3.5mm Dia.
Burnish / Paint
TAMF2013: 4 mm Dia
TAMF2012: 4.5mm Dia.
TAMF2010: 5 mm Dia.
1-800-327-9420
TAMF2015: 5.5mm Dia.
TAMF2017: 6 mm Dia.
TAMF2021: 6.5mm Dia.
TAMF2018: 7 mm Dia.
www.Campbell-Randall.com
Brushing Machines
Model
SP-915
Surface Brushing
Machine
The SP-915 is designed to brush the surface of strapped
goods to polish the finished product or to remove defects that
occurred during the previous working phases. This machine
can also brush with special abrasive and/or polishing waxes
for belts in order to create a special effects (ageing).
Standard Features:
Specifications
Standard
Voltage
Dimensions
Weight
220/60/1ph
39” x 25” x 51” inches
(100 x 63 x 130 cm)
287 lbs.
(130 kgs)
• Two speed motor for brushing operation
• Belt transport
• Independent pedals to adjust pressure on straps
• Wax supports for direct application to brushes
• Adjustable rollers height to compensate wear on brushes
• Front guards
• MADE IN ITALY
SM3-XL
Model
Three Station
Polisher
This machine is designed to finish the edges of unevenly shaped parts made
of leather or synthetic material both plaints ( watch straps, wallets, etc ) and
already assembled (bags, seats for chairs, etc). It features variable speed
motor, adjustment of the center horizontal wheel position, vacuum dust
collector on all three stations. MADE IN ITALY
Optional Equipment:
Can be equipped with the edge inker RC150. Allows the worker to paint and
polish without changing stations
Specifications
Standard Voltage
Dimensions
Weight
220/60/1ph
0.8 Kw
45” x 59” x 54” inches
(115 x 150 x 138 cm)
375 lbs.
(170 kgs)
Model
AGATA
Glazing Jack
The finest, quietest, fastest motor operated machine for polishing
hides. It enhances crocodile, reptile, wild boar, veal, mutton,
leather, etc. The AGATA has the advantage of operating with a
rigid, semi-rigid, and spring movement. A maximum run of 6-5/8”
(220mm) and about 220 turns per minute (cycles). Equipped with
safety equipment in compliance with current regulations.
Specifications
1-800-327-9420
Motor
Dimensions
Weight
1 HP
220/60/1ph
53” x 32” x 24” inches
(135 x 80 x 60 cm)
397 lbs.
(180 kgs)
www.Campbell-Randall.com
Brush / Polish
Model
B4
Line Finishing Machine
Great for cleaning and polishing shoes, leather
goods, plastics and metal !
Standard Features:
•
•
•
•
•
Use up to 4 standard Landis type (LF) wheels
Accepts brushes up to 12” diameter
The bench model can be wall-mounted
The floor model has storage shelves
MADE IN USA
Model B4F
(Floor Model on Stand)
Standard Voltage
Dimensions
Weight
1/3 HP, 115/60/1ph
24” x 20” x 51” inches
(61 x 51 x 130 cm)
150 lbs.
(68 kgs)
Model B4B
(Bench Model)
Standard Voltage
Dimensions
Weight
1/3 HP, 115/60/1ph
24” x 20” x 17” inches
(61 x 51 x 43 cm)
70 lbs.
(32 kgs)
Type
LF Brushes & Wheels
Horse Hair Brushes
LF-1673B
Sanding
Item No.
Description
LFS-1385
LFS-1385C
LB-1385
LB-1385C
LFS-1386
LFS-1386C
LFS-2125
LFS-2125C
LHSC
LF-Y1010
LF-Y1011
LF-Y233
LF-Y1140
YBSC
Wood & Felt Flat Sanding Wheel Refill
Flat Sanding Wheel Complete w/ Cams
Wood & Felt Curved “B” Wheel Refill
Curved “B” Wheel Complete w/ Cams
Wood & Felt Flat Sanding Wheel Refill
Flat Sanding Wheel Complete w/ Cams
Wood & Felt Flat Sanding Wheel Refill
Flat Sanding Wheel Complete w/ Cams
Set of Cams Only
Bottom Sander - uses 4-1/2” x 11” sheets
Bottom Sander with Cams
Bottom Sander - uses 9” x 11” sheets
Bottom Sander with Cams
Set of Cams
OD x Width x Bore
5 x 1-1/2 x 1-5/16
5 x 1-1/2 x 1-5/16
5 x 1-1/2 x 1-5/16
5 x 1-1/2 x 1-5/16
6 x 1-1/2 x 1-5/16
6 x 1-1/2 x 1-5/16
5 x 2-1/2 x 1-5/16
5 x 2-1/2 x 1-5/16
1-5/16
3 x 4-1/2 x 1-5/16
3 x 4-1/2 x 1-5/16
3 x 9 x 1-5/16
3 x 9 x 1-5/16
1-5/16
LF-8CF
LF-104
LF-2438
Description
OD x Width x Bore
LF-125
LF-1034
LF-1672B
LF-1673B
LF-1675B
LF-304
LF-312
LF-312G
LF-40-1/2BL
LF-40-1/2BR
LF-512BL
LF-512BR
LF-741
LF-80
LF-94
LF-95
LF-WSH
Black
Stiff (2” Chisel)
Brown
Black
White
Black
White
Brown
Black
Brown
Black
Brown
Mane Brush
White
Brown
Black
Ultra Fine Hair
10 x 2 x 1-5/16
9-1/2 x 1-1/2 x 1-5/16
8 x 2 x 1-5/16
8 x 2 x 1-5/16
8 x 2 x 1-5/16
9 x 1-1/2 x 1-5/16
9 x 1-1/2 x 1-5/16
9 x 1-1/2 x 1-5/16
7 x 1-1/2 x 1-5/16
7 x 1-1/2 x 1-5/16
5 x 1-1/2 x 1/2
5 x 1-1/2 x 1/2
11 x 1 x 1-5/16
12 x 4 x 1-5/16
12 x 4 x 1-5/16
12 x 4 x 1-5/16
12 x 4 x 1-5/16
LF-802
LF-803
Burnishers
Item No.
LF-812
Item No.
LF-5CF
LF-5CFA
LF-8CF
LF-802
LF-802A
LF-802B
LF-803
LF-803A
LF-804
Description
Felt Burnishing Wheel
Felt Burnishing Wheel
Felt Burnishing Wheel
Leather Heel Pad Burnisher (straight)
Linen Heel Pad Burnisher (straight)
Linen & Leather Heel Pad (straight)
Leather Heel Pad Burnisher (curved)
Linen Heel Pad Burnisher (curved)
Leather Heel Pad Burnisher (straight)
OD x Width x Bore
5 x 2 x 1-5/16
5x2x1
8 x 1-1/2 x 1-5/16
8 x 1-1/2 x 1-5/16
8 x 1-1/2 x 1-5/16
8 x 1-1/2 x 1-5/16
8 x 1-1/2 x 1-5/16
8 x 1-1/2 x 1-5/16
8 x 4 x 1-5/16
Yarn & Cloth Brushes
Item No.
Description
LF-45A
LF-812
LF-102
LF-104
LF-2438
Yarn Brush
Yarn Brush
Duck Cloth Friction Mop
Duck Cloth Friction Mop
Stitched Friction Mop
Brushes & Wheels
OD x Width x Bore
10 x 4 x 1-5/16
8 x 2 x 1-5/16
8 x 2 x 1-5/16
10 x 2 x 1-5/16
8 x 1-1/2 x 1-5/16
1-800-327-9420
LAN-YWBK : Yankee Wax - 100g - Black
LAN-YWBR : Yankee Wax - 100g - Brown
LAN-YWDB : Yankee Wax - 100g - Dark Brown
LAN-YWNT : Yankee Wax - 100g - Natural
www.Campbell-Randall.com
Model
FCE/AP
Automatic Dual Head
Burnishing Machine
Burnishes, and polishes both strap edges in one operation. Designed for processing belt edges
and sides of shoulder-straps for handbags in leather and synthetics. The FCE is equipped with one
set of burnishing wheels adjustable in all positions. Adjustable belt transport speed. Working station
equipped with dust vacuum. Mounted on the front, the AP unit is designed to grind/polish tips, or
other curved shapes. The operator prepares the tip on AP unit and then introduces the belt into the guides. While he is waiting for the first belt to process he can immediately prepare tip of second belt and so on. Estimated daily output of over 3000
straps from 40” to 47” (1000-1200mm) long. MADE IN ITALY
Optional Equipment:
Model RC-105 edge painter or RC-150 tip painter for a completely finished strap. The painters can be
easily removed for cleaning without any wrenches. A variety of inking wheels are available.
AP
Model
Model LCS2
The LCS2 is available with Specifications
many of the same features, Strap Widths
Variable Speed
but utilizes a heated wheel
5/16” to 4”
100 to 4000 rpm
(up to 220°C or 428°F) for
(8-100 mm)
Hot Glazing applications.
FC2E/AP
Power Source
Dimensions
Weight
220v/60/3ph
37” x 33” x 50”
(95 x 85 x 127cm)
276 lbs.
(125 kgs)
Automatic Four Head
Burnishing Machine
This all-in-one machine has been specially designed for finishing the edges of belts
and straps. Operator places the leather into the machine which is automatically fed
into the first set of wheels to round the edges. The next set polishs the edge clean and
smooth. These milling and/or brushing units are electronically controlled with optional
waxing units. The wheels are interchangeable to meet the demands of the product
and material. Working stations are equipped with a dust vacuum. The AP brushing
unit located on the front of the machine can be used for the finishing of the toes, tips
or similar parts prior to running the strap through the machine. The FC2E-AP easily
pays for itself with an estimated output of 3500 to 8000 belts per day. MADE IN ITALY
RC-105
Optional Equipment:
Model RC-105 edge painter or RC-150 tip painter for a completely finished strap. The painters can be easily removed for
cleaning without any wrenches. A variety of inking wheels are available.
Specifications
Model LCS4 : available with many of the
same features, but utilizes a heated wheel (up to
220°C or 428°F) for Hot Glazing applications.
Model
Strap Widths
Variable Speed
Power Source
Dimensions
Weight
5/16” to 4”
(8-100 mm)
100 to 4000 rpm
220v/60/3ph
39” x 39” x 50”
(100x100x128cm)
441 lbs.
(200 kgs)
LCS2+2
Automatic Four Head
Burnishing & Glazing Machine
Designed for the edges of belts or straps, the LCS2+2 incorporates the time proven method of traditional burnishing machines, with the process of the hot glazing.
Hot glazing uses heated profiled tools (fitted to the product). Hot glazing has been proven to produce a quality product and reducing working times. Electronically adjustable transport speed.
Front wheels provide the glazing application, and the rear wheels polish the final edge. The same
double application can be manually applied with independent units mounted on the front.
MADE IN ITALY
Optional Equipment:
Model RC-105 edge painter or RC-150 tip painter for a completely finished strap. The painters can
be easily removed for cleaning without any wrenches. A variety of inking wheels are available.
Specifications
Strap Widths
5/16” to 4”
(8-100 mm)
1-800-327-9420
Power Source
Dimensions
Weight
220v/60/3ph
41” x 37” x 51”
(105x95x130cm)
441 lbs.
(220 kgs)
www.Campbell-Randall.com
Burnishing
Hot Glazing Machines
Model
LS04
Specifications
Power Supply
Machine Weight
220V 1ph
25 lbs (11 kg)
1.1 A (0.25 Kw)
Dimensions
11” x 26” x 10” (27 x 65 x 26 cm)
The model LS04 is used to burnish with heated tools the edges of leather or
similar materials which have already been dyed or painted. By simply rubbing the
edge vertically across the surface of the universal tool, edges can be smoothed of
imperfections. The glazing tools can be supplied with grooved channels to suit the
application. With the aid of a probe inside the tool, the temperature can be accurately
controlled with a thermostat up to 480°F (250°C). Made In Italy
Model
LS04A
The LS04-A, in addition to the standard
features of the LS04, includes an exhaust
system to absorb any fumes that may cause
irritation to the operator.
Specifications
Power Supply
Machine Weight
220V 1ph
29 lbs (13 kg)
1.1 A (0.25 Kw)
Dimensions
11” x 26” x 12” (27 x 65 x 30 cm)
Model
LS02-S
The model LS02-S is used to burnish with heated
tools the edges of leather or similar materials which
have already been dyed or painted. A very simple
machine in use, the LS02-S is equipped with 3 work
stations; two vertical and one horizontal work table.
The glazing tools can be supplied with grooved
channels to suit the application. With the aid of
a probe inside the tool, the temperature can be
accurately controlled with a thermostat up to 480°F
(250°C). The tool can be disconnected when not in
use. Made In Italy
Hot Glazing Machines
Specifications
Power Supply
Machine Weight
220V 1ph
110 lbs (50 kg)
3.5 A (0.75 Kw)
Dimensions
20” x 28” x 47” (50x72x120cm)
1-800-327-9420
www.Campbell-Randall.com
Model
LC50
Hot Glazing Machines
The LC50 is a practical unit
that can be placed on any work
bench. Produces a clean finished
edge with a heated wheel.
Temperature is adjustable by
a digital controller up to 425°F
(220°C). Various tools available
to form the shape of edge to be
worked up to (shaped tools by
request). Made In Italy
Specifications
Power Supply
Machine Weight
220V 1ph
15lbs (7 kg)
Dimensions
8” x 11” x 10” (20 x 27 x 24 cm)
BF series
BF110
BF24
Made In Italy
BF24 Specifications
Power Supply
Machine Weight
220V 1ph
5lbs (2.1 kg)
Dimensions
8” x 8” x 9” (20 x 20 x 22 cm)
Accessories
Part
BF-59981-60W
BF-61204
BF-68905
BF-68906
BF-68908
BF-68909
Machine Weight
Hot Glazing Handle - 60W (220V)
Brass Support for Glazing Tools
Edge Glazing Tool
Edge Creasing Tool (1, 1.5, 2 mm)
Curved Edge Tool (3, 4, 5, 6 mm)
Thread Burning Tool
Accessories for 110V ONLY
Part
Machine Weight
PHC-PTT
Hot Glazing Handle - 110V
PHC-PTC
Hot Creasing Roller for PTT Handle
BF-61110
Brass Adaptor for Galzing Tools
AC-HC-110/15ST Heat Control - 110V
1-800-327-9420
The model BF series tools are
designed for hot glazing and creasing
leather edges. The unit is equipped
with a single tool heated with a
thermostat on the control box. The
tool can be used to burn thread,
trace edges, create crease lines,
hot glaze difficult to reach painted
edges, and small scale hot stamping
or embossing. Special attachments
can be ordered as needed and
easily interchanged with only a few
minutes required to reach working
temperature.
www.Campbell-Randall.com
PHC-PTC
Hot Glazing Machines
Model
SERVER
Automatic Belt
Loading Machine
The SERVER automatically loads straps in a working line. It is supplied with two lateral loaders that can
carry straps up to a maximum load height of 500mm (about 170 straps), and one swinging bar with six
pneumatic cylinders (with adjustable position) that picks up the strap from the loader and feeds it into the
next station. Fully automatic loading cycle. The operator chooses from which side the machine will begin
to work. As the straps from the first side run out, the swinging bar moves automatically to the opposite
side and the first support returns at the loading position. The SERVER is equipped with four rotating
wheels, two of which are equipped with brakes. MADE IN ITALY
Optional Equipment
• Remote control for operation at a distance.
Other Models
Server-XL: Set up to collect
wider straps of material prepared
for “multiple system” working.
(model SERVER-XL pictured)
Model
R120
Transport Speed
Belt Collecting
Machine
13 to 26 ft/min
(4 to 8 m/min)
Standard Voltage
Dimensions
Weight
220/60/3
65” x 27” x 46”
(165x68x117cm)
397 lbs.
(180kg)
Model
R5L
Belt Collecting Machine
This machine has been
designed to unload belts at
the end of an operating line
or single work station. It is
equipped with a conveyor
belt, adjustable speed with
an inverter, a photocell and
three cylinders to eject the
belt along the collecting area.
Features seperate mobile
case.
MADE IN ITALY
Max. Belt Width
Max. Transport Speed
2-3/8”
(60mm)
49 ft/min
(15 m/min)
Standard Voltage
Dimensions
Weight
220/60/1
59” x 24” x 41”
(150x60x105 cm)
97 lbs.
(44 kg)
Model
R5S
Belt Collecting Machine
w/ Tip Inking & Drying Unit
The R5S automatically collect belts and straps at the end of the
edge finishing line. A conveyor moves the belt down the line, as it
passes a sensor, the belt is moved aside to travel perpendicular
to the line. The tip is dyed and sequentially dried. While the rest
of the line keeps sending belts, the belt remains on the machine
to allow the paint to set before stacking. Inking unit is easily
removed for cleaning. MADE IN ITALY
Max. Belt
Width
Max. Belt
Length
Max. Transport Speed
2-3/8”
(60mm)
61”
(155cm)
59 ft/min
(18 m/min)
Work Handling
Standard
Voltage
Dimensions
Weight
220/60/1
75” x 34” x 47”
(190x85x120 cm)
380 lbs.
(172 kg)
1-800-327-9420
www.Campbell-Randall.com
Drying Tunnels
Model
TGV-20
TGV-20.5
Model
Drying Tunnel
Wide Drying Tunnel
Designed to dry painted edges
of leather or synthetic materials.
Adaptable to belts, straps, hand
bags,
watch straps, and other small
leather goods.
The TGV20 is equipped with
an adjustable speed transport
conveyor, four heated fans and a
digital electronic thermoregulator
to adjust the internal temperature.
This machine can be equiped
with painting units or added to
any of the TECNO SYSTEM
automatic edge finishing lines.
Optional Equipment
RC-200
•
•
•
•
•
•
Tunnel
Width
Max.
Standard
Temperature Voltage
TGV-20
49 ft/min
(15 m/min)
4-3/8”
(110 mm)
300° F
(150° C)
TGV-20.5
49 ft/min
(15 m/min)
20”
(510 mm)
300° F
(150° C)
RC-500
TGV-20 Painting Station
Features
Max. Transport
Speed
Dimensions
Weight
220/60/3
3.5 Kw
93” x 20” x 45”
(235x50x115 cm)
287 lbs.
(130 kg)
220/60/3
4.5 Kw
105” x 36” x 47”
(265x90x120 cm)
550 lbs.
(250 kg)
TGV-20.5
Painting Station
• Adaptable for large parts or two independent paint stations
Two independent painting units
Painters are adjustable in height,
distance and tension
Work surface adjustable in height
Painting wheels interchangeable in
size and shape
Variable transport feed control
Easy replacement of painting unit &
tank.
Options
•
•
•
•
Kit for painting small and narrow parts
Kit for open or closed belt loops
Front support table
Special painting wheels
R1000
Rolled Goods
Conveyor
1-800-327-9420
www.Campbell-Randall.com
TARC500
Work Guide
Roller
Drying Ovens
Drying Tunnels
Model JUMBO
Large Drying Tunnel
Designed to dry the dyed edge of bags, belts, straps,
shoulder straps, and leather goods in general. Equipped
with a transport belt driven by a variable speed control
motor, a digital electronic thermoregulator to adjust
the internal temperature. The JUMBO features a
large ventilation system that recycles the air inside
the cabinet, thus allowing the machine to reach the
desired temperature quickly and maintain it without high
electrical consumption. As the product is transported
through the machine, the drying cabinet opens and
closes automatically, thus preventing unnecessary heat
dispersion.
Optional Equipment
• Conveyor Band R1000
• Collecting unit at the end of the line
Max. Transport
Speed
Max. Temperature
Standard
Voltage
Dimensions
Weight
49 ft/min
(15 m/min)
300° F
(150° C)
220/60/3
122” x 43” x 67”
(310x110x170cm)
772 lbs.
(350 kg)
Model VULCAN
Vortex Drying Oven
The VULCAN oven serves a) to reactivate
the glue after application to chairs, car
dashboards etc.; b) or to dry at low
temperatures with forced ventilation, all
kinds of leather products that have been
painted or glued.
Also used to warm hand bags so that they
can be turned inside-out after sewing. By
maintaining a temperature of about 60°C
(140°F), the bag leathers will soften for
easier working.
The unit is equipped with 3 individual
slide-out trays, which can be used
together or independently according
to the circumstance. The trays can be
completely removed from the oven for
repairs or cleaning. The oven was built to
maintain a maximum inside temperature
of 100°C (212°F). A sliding door from
the top completely encloses the opening.
A vertical jet of air along the width of
the opening protects the operator from
exposure to heat when the door is lifted.
Work Opening
72-1/2” (184cm.) wide
27-1/2” (70 cm) high
Drying Ovens
1-800-327-9420
Power Usage
Dimensions
Weight
15 Kw
77” x 63” x 75”
(196 x 160 x 190 cm)
992 lbs.
(450 kg)
www.Campbell-Randall.com
Model EOLO
Rotary Drying Oven
The EOLO is designed for drying by means of cyclical rotation with low temperature and forced ventilation.
This machine is used specifically for drying dyed or glued parts created in leather or similar materials which
need a reduced drying times without compromising the quality and characteristics of the products. The
machine can be loaded and unloaded from the same opening. EOLO is equipped with a timer and can be set
by the operator. This setting depends on the produce and application.
The operational cycle can be set either by setting rotation timer on automatic or by setting operation on
manual position after loading. Forced ventilation produced inside the machine enables fast and thorough
drying at an average temperature of 40°C with posing time which can vary from a minimum of 2 minutes,
depending on the size of the articles to be dried and the loading speed. This oven does not suffer heat
dispersion and only consumes 6Kwatt electric current to bring itself to the set temperature, after which the
consumption is reduced by 60% in order to maintain set values constant. EOLO is an advanced version of
STAR-6 as it is equipped with a air-jet at the front opening to avoid hot-air emission, therefore improving the air
re-cycle and avoiding disturbance to the operator. This oven is also equipped with extractable trays on which
to rest shoes on moulds.
Tray Capacity
(x6 trays)
Power Usage
Max. Temperature
31.5” x 15.75 ” x 15.75”
(80 x 40x 40 cm)
6.0 Kw Start
2.2 kW Run
300° F
(150° C)
Standard
Voltage
Dimensions
Weight
220/60/1
63” x 39” x75”
(160x98x190 cm)
790 lbs.
(358 kg)
Model STAR 7
Vortex Drying Oven
Control Panel
• Cyclical rotation oven
• Forced ventilation, low temperature
• Blade-like, jet ventilation
This machine model STAR-7 is a low temperature
drier with forced ventilation for working leather
products or similar materials to which dye has been
applied. Tests have proved that for best results it
is necessary to allow drying for approx. 2/3 min
at about 40°C. The machine can be loaded and
unloaded from the same side as a main work
station or it can be used as a tunnel—loading
from the front and unloading from the back. It is
very simple to use and an automatic cycle can be
selected by setting the loading time, after which the
wheel which rotates the 6 trays will shift by one position
or a manual cycle can be selected while a led will flash to
indicate when the set time has expired. The operator will
then decide whether to press the button in order to shift
the trays manually or wait in order to complete the work
in process. In other words the manual cycle can shift the
trays on operators’ request.The incoming blade-like air jet
limits and prevents heat emission therefore protecting the
operator.
Optional Equipment
• Photoelectric barrier
Power Usage
Dimensions
Weight
6 Kw
71” x 38-1/2” x 75”
(180 x 98 x 190cm)
798 lbs.
(362 kg)
Model MISTRAL
Vortex Drying Oven
• Vortex drying oven with back & front access
• Forced ventilation, low temperature
• Blade-like, jet ventilation
This machine is created to dry all dyed leather products or similar materials at
low temperatures and through forced ventilation. It is also used to turn bags
in-side-out after stitching, bringing the temperature to 60°C in order to facilitate
this operation. Testing has proved that the necessary time for optimal drying is
approx. 2/3 min. at a temperature of approx 40°C. The drier can be loaded and
unloaded from the same position, or unloaded from the opposite side (as another
optional work station). The possibility of shutting the panel doors will limit heat
consumption thanks to thermal insulation. The possibility of height regulation
offers the option of a shelf at 70cm and another one at over 1mt in height. Extra
trays can be ordered and added, so as to offer various height possibilities.
1-800-327-9420
Dimensions
Weight
27-1/2” x 35 x 63”
(70 x 90 x 160cm)
400 lbs.
(180 kg)
www.Campbell-Randall.com
Drying Ovens
Belt Working Lines
Techno 20, 30, 40, 50, 55, 60, 70, 80...
The TECNO Systems automatically works the edge of belts and leather straps (or synthetic material). This system can obtain a good finish, without varying the width of the inserted straps and considerably saves time and
material. The line is easy to operate and can be reduced or combined with other units.
Tecno 20
Burnish, Paint, Dry & Stack
Insert the strap to be rounded off and brushed into the model
FC2E+AP by means of easily interchangeable tools that are diversified according to the material to be worked; then it passes into painting unit model RC105 and into the drying oven TGV20. The band is
then recovered in the collector model R1. It is possible to choose the
most suitable collector between the model R1, version R5L (with a
further side conveyor), and version R5S (as pictured) with the extra
advantage of automatic tip painting and drying.
Tecno 30
Double Burnish - Double Paint
Dry & Stack
The operator only has to insert the strap to be rounded off, brushed and dyed in the first machine model
FC2E+AP+RC105; then it passes in the first drying oven TGV20+C and is directly conveyed into the
brushing machine where it receives a double brushing and a second finishing dyeing FC2E+RC105;
afterwards, it is introduced in the oven TGV20 for the final drying and then collected in the model R1. It is
possible to choose the most suitable collector between the model R1 (as pictured), version R5L (with a further side conveyor), and version R5S with the extra advantage of automatic tip painting and drying.
Tecno 40
BEVEL, PAINT, Dry & Stack
The first station on this line is the machine model RCA COLOR, similar to the PK95 combining and
bevelling unit. Both sides of the introduced straps are rounded off by means of specially shaped
knives. Waste is collected by the an internal suction device and the edges are thus ready to be
dyed in device model RC105. Then, the strap is fed into the drying oven model TGV20 and then
recovered in the collection unit R1. Choose the most suitable collector for your needs; either the
model R1 (as pictured), version R5L (with a further side conveyor), and version R5S with the extra
advantage of automatic tip painting and drying.
Automatic Lines
1-800-327-9420
www.Campbell-Randall.com
Tecno 50
Fully Automatic
Burnish, Paint, Dry & Stack
Tecno 55 -
The TECNO 50 is the automatic version of TECNO 20. Besides having the
same features in terms of finishing edges of belts and straps made of leather
and synthetic materials, it is equipped with an automatic loader as a first
station where straps are placed and
automatically fed into the machine
model FC2E+AP. Upon loading the
two sides of the SERVER, which work
independently, the operator can then
attend to the immediate control of
adjustments and quality inspection.
Once the machines are set into
motion, the system is essential self
automated. The loader model
SERVER can also be used as a feeder for other
machines, and is easy to move with the provided wheels.
Remember it is possible to choose the most suitable collector for the production
needs. With the model R1, the belt follows a conveyor and is piled for collection. The R5L is similar to the R1, but features an additional side conveyor, and
version R5S (as pictured) with the extra advantage of automatic tip painting and
drying for a completed belt edge.
Same as TECNO 50, but includes the TMA 300 fully automatic printing machine.
Tecno 60
Automatic PRINTING Line
The TECNO 60 is a line fully automatic to print line to foil stamp belts
or straps with the TMA 300 stamping machine. The operator loads
both sides of the automatic loader SERVER and engages the line. The
SERVER automatically feeds the belts into the TMA 300, and after
printing straps are collected into unit R1. The loader model SERVER
can also be independently used as a feeder for other machines.
Tecno 70
Fully Automatic
Burnish, Paint,
Double Dry & Stack
The TECNO 70 similar to the TECNO 40 but incorporates a “double” drying operation with
two TGV-20 tunnels. With this line it is possible to get same quality as per regular version
TECNO 20 but with higher production capacity and increased working speed.
Tecno 80
BEVEL, PAINT, Dry, Polish & Stack
The TECNO 70 is like version TECNO 40 with a further polishing operation. The RCA COLOR
rounds off the edges by using shaped knives (also applicable to two piece belts) and then paints the
edges on exit. Next the strap goes through the TGV 20 tunnel to be dried and then passes through
the FCE+AP polishing unit to smooth out any imperfections. The system can use the R1 collector
(pictured) or the version R5S with tip painter.
1-800-327-9420
www.Campbell-Randall.com
Automatic Lines