price list 2016/2017 - Finn Enterprise Ltd

Transcription

price list 2016/2017 - Finn Enterprise Ltd
PRICE LIST
20 16/ 20 17
Finland
Valid from 01.01.2016
P L E A SE NO T E
Customer price list for new guns and accessories. Prices
are in Euro including 24 % VAT.
Valid from 01.01.2016
As we continuously work to improve our product line, we
ask for your understanding that features and technical information may vary slightly on the final product. Goods
remain property of Krieghoff until full payment has been
received. We reserve the right to make any changes to
price, design, technical aspects, color and/or accessories
supplied with any of the products described in this price
list.
Purchaser must possess a valid firearm permit.
Our general terms and conditions apply to all orders
(www.krieghoff.de/agb/agb-en.pdf).
The place of jurisdiction for both parties is Ulm.
All information supplied is without guarantee.
All rights reserved.
H. Krieghoff GmbH
Hunting and Sporting Arms
Boschstrasse 22 · 89079 Ulm
Germany
Phone: +49 (0) 7 31 / 4 01 82-0
Fax: +49 (0) 7 31 / 4 01 82-800
[email protected]
www.krieghoff.de
K R IEGHOF F IMP OR T ER
William Wadstein
Helsinki Finland
Pohjoisranta 22
Tel.(09) 135 4455, 135 1358
Fax (09) 135 1671
[email protected]
Aseliike & Metsästysmatkat
Vapenaffär & Jaktresor
Gunshop & Huntingstrips
Relvaäri & Jahireisid
Oхотничий магазин и
охотничьи путешествия
Version: 01/2016
CONTENTS
I.
II.
III.
IV.
V.
VI.
VII.
VIII.
IX.
X.
XI.
Krieghoff Optima
Drilling, double rifle drilling and “Big Five” double rifle drilling
2
Krieghoff Ultra
Over & under rifle/shotgun combination, over & under double rifle
and “Bergstutzen”
8
Krieghoff Classic
Side-by-side double rifle and“Big Five” side-by-side double rifle,
side-by-side rifle/shotgun combination and side-by-side shotgun
13
Krieghoff Hubertus
Single shot rifle
18
Krieghoff Semprio
In-Line repeater
22
Krieghoff Trumpf
Drilling and double rifle drilling
25
Competition shotguns
K-80 over & under shotgun
K-20 over & under shotgun
KX-6 single barrel shotgun
K-80 Matrix barrel set combinations
K-80 Matrix barrel set weights and options
K-80, K-20 Stock dimensions
30
33
33
38
39
40
Krieghoff Essencia
Side-by-side sidelock shotgun
Single shot sidelock rifle
“Big Five” side-by-side sidelock double rifle
41
42
43
Engravings
Hunting guns
Semprio
Competition shotguns
Custom engravings
44
47
48
56
Various
Service and options
Appendix
57
60
Memo
64
1
OP T IM A
K R IEGHOF F OP T IM A
Krieghoff Optima
Drilling shown with additional options
Engraving: “Large game scene with leaf arabesques”
Optima standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount 1
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Quick detachable sling swivels
▶ Steel base plate
▶ Nickel plated receiver finish
▶ Ornamental line engraved around receiver
border
▶ Hinge screws, top latch, screws and pins
are blued
▶ Standard wood
▶ Right-handed stock with Bavarian-style
1
cheekpiece and “Schnabel” forearm
▶ Supplied in Krieghoff GunPack
Optima 12 and 20 drilling thermo stable
7.149,00 €
Action available in steel or duraluminium; standard barrel length: 55 cm (22“),
or 60 cm (24“) optionally; standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“)
rubber recoil pad in black.
Weight (Optima 12) ca. 3.600 – 4.000 g. Weight (Optima 20) ca. 3.400 – 3.800 g.
7.455,00 €
Optima 12 and 20 Drilling traditionally soldered
Action available in steel or duraluminium; standard barrel length: 60 cm (24“),
or 55 cm (22”) optionally; standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“)
rubber recoil pad in black.
Weight (Optima 12) ca. 3.500 – 3.900 g. Weight (Optima 20) ca. 3.300 – 3.700 g.
8.469,00 €
Optima 20 drilling with 1-2 special trigger system
Features same action as Optima drilling, without the need for a barrel selector.
Further information on this exceptional version can be found in the Krieghoff
Hunting Gun Catalog. Weight ca. 3.400 – 3.800 g.
8.434,00 €
Optima 20 double rifle drilling
Steel receiver; standard barrel length: 55 cm (22“), or 60 cm (24“) optionally;
standard stock length: 37 cm (14,5“), incl. 15 mm (0,6“) rubber recoil pad in black.
Weight ca. 4.000 g.
Optima 20 double rifle drilling with 1-2 special trigger system
Features same action as Optima double rifle drilling, without the need for a barrel
selector. Further information on this exceptional version can be found in the
Krieghoff Hunting Gun Catalog.
1
Except for Optima “Big Five”.
2
9.751,00 €
Steel receiver; standard barrel length: 60 cm (24“); traditionally soldered; standard
stock length: 38 cm (15“), incl. 15 mm (0,6“) rubber recoil pad in black; steel trigger
base plate and heavy stock bolt for weight and balance optimization; open sight
featuring wide V-shape middle sight, ball shaped front bead and “Big Five” stock
contour.
C ALIBRES AND GAUGES
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Optima 12 and 20 drilling thermo stable
▶▶ Rifle calibres: 6,5x57R, 6,5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9,3x74R
▶▶ Optima 12 duraluminium receiver, standard gauge 12/70
▶▶ Optima 12 steel receiver, standard gauge 12/76
▶▶ Optima 20, standard gauge 20/76
▶▶ Choke: 1/2–3/4
Optima 20 double rifle drilling
▶▶ Calibre: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS, 9,3x74R
▶▶ Gauge: 20/76
▶▶ Choke: 3/4
Optima 20 „Big Five“ Doppelbüchsdrilling
▶▶ Calibre: .375 H&H Mag., .450/.400 N.E., .500/.416 N.E. (3 1/4”), .470 N.E.
▶▶ Gauge: 20/76
▶▶ Choke: 3/4
ab
Custom calibres and gauges
1.215,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
168,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
122,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger or Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
544,00 €
Krieghoff 1-2 trigger
705,00 €
(Double trigger, front trigger works as set trigger)
Different barrel length
▶▶ 60 cm (24") for thermostable model Optima drilling
▶▶ 55 cm (22") for traditionally soldered Optima drilling
544,00 €
544,00 €
Single combination trigger featuring set trigger device, non selective
544,00 €
Fixed firing sequence: right barrel – left barrel or bottom barrel – top barrel. Because
of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g. drillings with insert barrels. Single triggers are generally available
up to calibre .375, but not in combination with the automatic set trigger release.
1
Custom made.
3
OP T IM A
14.541,00 €
Optima 20 “Big Five” double rifle drilling 1
OP T IM A
342,00 €
Cosmetic sideribs for models thermo stable
For technical and aesthetic reasons, the side rib is best fitted after scope mounting
and sighting-in and we strongly recommend that this process is carried out at the
factory. Not available for Optima 12 featuring 60 cm (24") barrel length.
301,00 €
Krieghoff see through sight
For Optima 12 and 20 drilling thermo stable and Optima 20 double rifle drilling
97,00 €
2-way flip sight
For Optima double rifle drilling. Wide U-shaped middle sight for shotshell and slug
use. Fine U-shaped sight for rifle use.
215,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Folding and express sights
▶▶ Express sights with two folding leaves for Optima “Big Five” double rifle
drilling
▶▶ Express sights with two folding leaves for Optima “Big Five” double rifle
drilling; Sighting-in distances and vertical gold lines inlaid into both fixed
and folding leaves.
642,00 €
1.076,00 €
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of
less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms
with two shotgun barrels, the group has to be less than 15 cm.
▶▶ Models thermo stable:
One barrel on Optima 12 and 20 thermo stable
Both barrels on Optima 12 and 20 thermo stable
▶▶ Traditional soldered models:
One barrel on drilling and double rifle drilling model Optima
Both barrels on Optima drilling
164,00 €
381,00 €
324,00 €
648,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Optima 12 and 20 drilling thermo stable
▶▶ Pivot bridge mount
815,00 €
Optima 20 – Doppelbüchsdrilling
▶▶ Pivot bridge mount
▶▶ Tip-off mount for red dot sight
1.124,00 €
748,00 €
Optima 20 “Big Five” double rifle drilling
▶▶ Pivot bridge mount
1.452,00 €
Fitting a base plate for Optima “Big Five”
▶▶ For pivot bridge mount
1
no extra charge
Not available in conjunction with screw-in chokes.
Please pay attention to the instructions about “scope mounts” on page 64.
4
OP T IM A
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶▶ Interchangeable drilling barrel, thermo stable 1
▶▶ Interchangeable drilling barrel, traditionally soldered 1
▶▶ Interchangeable double rifle drilling barrel, traditionally soldered
(only Optima 20)
▶▶ Interchangeable double rifle drilling barrel “Big Five”, traditionally soldered
(only Optima 20)
3.854,00 €
4.180,00 €
5.220,00 €
11.314,00 €
F L USH F I T T ING B R IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
Fitting of chokes, per barrel 2
Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 2
Briley Choke wrench 2
“Speed” wrench for quick choke changes (12 and 20 gauge)2
Briley Special grease for choke2
Krieghoff Container for three chokes2
Briley Container for five chokes2
141,00 €
96,00 €
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
S T O C K S & W O OD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
2.916,00 €
3.789,00 €
4.625,00 €
Right-handed stock (hand-crafted) 2
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Left-handed stock (hand-crafted) 2
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
1
The gauge of the interchangeable barrel has to be the same shotgun gauge as the original barrel.
2
Position is not discountable.
5
737,00 €
1.072,00 €
OP T IM A
Forearm (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
194,00 €
447,00 €
Rubber recoil pad
322,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.050,00 €
Stock magazine with hinged cover plate
Ornamental line engraving to match receiver border included.
Other engravings upon request.
E XCL USI V E OP T IONS
3.038,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
949,00 €
Fine checkering instead of standard checkering 2
139,00 €
Skip checkering instead of standard checkering 2
94,00 €
3.515,00 €
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
3.515,00 €
Checkering with carved border on grip and forearm 2
1.416,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
557,00 €
Ebony or rosewood cap on grip and forearm 2
SUR FAC E FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or nitrated.
▶▶
▶▶
▶▶
▶▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
483,00 €
199,00 €
729,00 €
MONO GR A M S & L O CK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering, see page 62 3
122,00 €
407,00 €
1
2
Only available in conjunction with custom made stock and forearm.
Position is not discountable.
3
Only available in conjunction with custom made stock.
6
OP T IM A
Monograms
▶▶
▶▶
▶▶
▶▶
224,00 €
324,00 €
533,00 €
732,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶▶
▶▶
▶▶
▶▶
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
365,00 €
833,00 €
149,00 €
207,00 €
K R IEGHOF F INSER T B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is
done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in.
Drillings featuring light weight receivers, made from Duraluminium can only be equipped with
.22 Hornet calibres and only if the lock up of the gun is in good condition.
The exception here is our Optima 20 drilling dural which features a specially designed lock up system,
which is also suitable for larger calibres such as .222 Rem, 5.6x50R Mag. and 5.6x52R. The Optima
drilling 12/76 (3") and 20/76 (3") in steel version accepts all insert barrel calibres up to 9.3x74R.
Gauge 12
▶▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6.5x57R,
7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
▶▶ .308 Win., .30–06, 9.3x74R
1.550,00 €
1.876,00 €
Gauge 20
▶▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage,
▶▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
▶▶ .308 Win., .30–06, 9.3x74R
price on request
EL 22 and EL 44
1
1.550,00 €
1.769,00 €
1.876,00 €
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
7
K R IEGHOF F ULT R A
ULT R A
Krieghoff Ultra
Over & under double rifle shown with additional options
Engraving: “Large game scene with oak leaves”
Ultra standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Quick detachable sling swivels
▶ Steel base plate
▶ Nickel plated receiver finish
▶ Ornamental line engraved around receiver
border
▶ Hinge screws, top latch, screws and pins
are blued
▶ Standard wood
▶ Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
▶ Supplied in Krieghoff GunPack
Ultra 20 over & under rifle/shotgun combination thermo stable
4.512,00 €
Action available in steel or duraluminium; standard barrel length: 55 cm (22“),
or 60 cm (24“) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6")
rubber recoil pad in black. Weight ca. 2.700 – 3.400 g.
Ultra 20 over & under rifle/shotgun combination traditionally soldered
4.818,00 €
Action available in steel or duraluminium; standard barrel length: 63,5 cm (25”),
or 60 cm (24”) optionally; standard stock length: 37 cm (14,5”) incl. 15 mm (0,6”)
rubber recoil pad in black. Weight ca. 2.600 – 3.300 g.
5.239,00 €
Ultra 20 over & under double rifle thermo stable
Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally;
standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black.
Weight ca. 3.200 – 3.900 g.
6.435,00 €
Ultra 20 “Bergstutzen” thermo stable 1
Steel receiver; standard barrel length: 60 cm (24"), or 55 cm (22") optionally;
standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black.
Weight ca. 3.100 – 3.800 g.
C A L IB R E S A ND G AUGE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Ultra 20 over & under rifle/shotgun combination (thermo stable and soldered)
▶▶ Rifle calibres: 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9.3x74R
▶▶ Shotgun gauges: 20/76
1
Available on request.
8
Ultra 20 over & under double rifle thermo stable
▶▶ Same calibres in both barrels.
▶▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
ULT R A
Ultra 20 “Bergstutzen” thermo stable
▶▶ Rifle calibre bottom barrel: .22 Ho., .222 Rem., .243 Win., 5.6x50R Mag,
5.6x52R, 6.5x57R, 6.5x65R
▶▶ Rifle calibre top barrel: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS,
8x75RS, 9.3x74R
ab
Custom calibres and gauges
1.215,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
168,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
122,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger or Krieghoff 1-2 trigger
Second set trigger installed in the rear trigger
544,00 €
Krieghoff 1-2 trigger
705,00 €
(Double trigger, front trigger works as set trigger)
Different barrel length
▶▶ 55 cm (22") for thermostable model Ultra over & under double rifle and
“Bergstutzen”
▶▶ 60 cm (24") for thermostable model Ultra over & under rifle/shotgun
combination
Single combination trigger featuring set trigger device, non selective
no extra charge
544,00 €
544,00 €
Fixed firing sequence: bottom barrel – top barrel. Because of the fixed firing sequence, this feature is not recommended for models with selective barrels, e. g.
over & under rifles and “Bergstutzen”. Not available in combination with the
automatic set trigger release.
301,00 €
Krieghoff see through sight
For Ultra 20 over & under double rifle thermo stable
97,00 €
2-way flip sight
For Ultra over & under rifle/shotgun combination. Wide U-shaped middle sight for
shotshell and slug use. Fine U-shaped sight for rifle use.
342,00 €
Cosmetic sideribs for models thermo stable
For technical and aesthetic reasons, the side rib is best fitted after scope mounting
and sighting-in and we strongly recommend that this process is carried out at the
factory.
215,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of
less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms
with two shotgun barrels, the group has to be less than 15 cm.
▶▶ Models thermo stable:
One barrel on Ultra 20 over & under rifle/shotgun combination
▶▶ Traditional soldered models:
1
Please pay attention to the instructions about “scope mounts” on page 64.
9
164,00 €
One barrel on Ultra 20 over & under rifle/shotgun combination
324,00 €
ENGR AV INGS
ULT R A
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Ultra 20 over & under rifle/shotgun combination thermo stable and
over & under rifle/shotgun combination traditionally soldered
▶▶ Pivot bridge mount
815,00 €
Ultra 20 over & under double rifle thermo stable
▶▶ Pivot bridge mount
▶▶ Pivot bridge ring mount for driven hunt scopes 1
▶▶ Tip-off mount for red dot sight
962,00 €
1.100,00 €
748,00 €
Ultra 20 “Bergstutzen” thermo stable
▶▶ Pivot bridge mount
962,00 €
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶▶ Interchangeable over & under rifle/shotgun combination barrel, thermo stable
▶▶ Interchangeable over & under rifle/shotgun combination barrel, traditionally
soldered 2
▶▶ Interchangeable over & under double rifle, thermo stable
▶▶ Interchangeable “Bergstutzen” barrel, thermo stable
2.156,00 €
2.508,00 €
2.987,00 €
4.358,00 €
F L USH F I T T ING B R IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
1
Fitting of chokes, per barrel 3
Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 4
Briley Choke wrench 4
“Speed” wrench for quick choke changes (12 and 20 gauge) 4
Briley Special grease for choke 4
Krieghoff Container for three chokes 4
Briley Container for five chokes 4
Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.
This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.
Available on request.
2
3
Position is not discountable.
10
141,00 €
96,00 €
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
2.916,00 €
3.789,00 €
4.625,00 €
Right-handed stock (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Forearm (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
194,00 €
447,00 €
Rubber recoil pad
322,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.050,00 €
Stock magazine with hinged cover plate
Ornamental line engraving to match receiver border included.
E XCL USI V E OP T IONS
3.038,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
949,00 €
Fine checkering instead of standard checkering 2
139,00 €
Skip checkering instead of standard checkering 2
94,00 €
3.515,00 €
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
1
Position is not discountable.
2
Only available in conjunction with custom made stock.
11
3.515,00 €
ULT R A
S T O C K S & W O OD W OR K
1.416,00 €
Checkering with carved border on grip and forearm 2
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
ULT R A
557,00 €
Ebony or rosewood cap on grip and forearm 1
SUR FAC E FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶▶
▶▶
▶▶
▶▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
483,00 €
199,00 €
729,00 €
MONO GR A M S & L O CK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering 1, see page 62
122,00 €
407,00 €
Monograms
▶▶
▶▶
▶▶
▶▶
224,00 €
324,00 €
533,00 €
732,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶▶
▶▶
▶▶
▶▶
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
365,00 €
833,00 €
149,00 €
207,00 €
K R IEGHOF F INSER T B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in, without deinstalling it from the carrier barrel. All adjustment is
done at the muzzle of the insert barrel. The listed prices already include fitting, state certified proof and
sighting-in. Over & under rifle/shotgun combination featuring light weight receivers, made from Duraluminium can only be equipped with 5,6x52R Mag calibres and only, if the lock up of the gun is in good
condition.
Gauge 20
▶▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage
▶▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
▶▶ .308 Win., .30–06, 9.3x74R
EL 22 and EL 44
1
1.550,00 €
1.769,00 €
1.876,00 €
price on request
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
12
K R IEGHOF F CL A SSIC CL A SSIC
Krieghoff Classic
Double Rifle “Big Five” shown with additional options;
custom engraving and Big Five stock
Classic standard configuration:
▶ Set trigger integrated in the front trigger 1
▶ Steel receiver
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger plate and Steel trigger guard
▶ Front plate for pivot bridge mount 1
▶ Quick detachable sling swivels
▶ Nickel plated receiver finish
▶ Ornamental line engraved around receiver
border
▶ Hinge screws, top latch, screws and pins
are blued
▶ Standard wood
▶ Right-handed stock with Bavarian-style
1
and “Schnabel” forearm
cheekpiece ▶ Supplied in Krieghoff GunPack
6.603,00 €
Classic double rifle
Standard barrel length: 60 cm (24"), or 55 cm (22”) optionally; standard stock length:
37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight ca. 3.300 – 3.700 g.
9.125,00 €
Classic “Big Five” double rifle
Standard barrel length: 60 cm (24"); standard stock length: 38 cm (15"); articulated
front trigger without set trigger device; special weighted stock-bolt for optimum
weight and balance; V-Shaped rear sight with bead front sight; right-handed “Big
Five” stock incl. “Old English” rubber recoil pad in black. Weight ca. 4.200 – 4.800 g.
6.509,00 €
Classic side-by-side shotgun
Standard barrel length: 71 cm (28"); standard stock length: 37 cm (14,5") incl.
15 mm (0,6") rubber recoil pad in black; Steel shot proofed depending on choke size.
Weight ca. 2.900 – 3.100 g.
8.654,00 €
Classic side-by-side rifle/shotgun combination 2
Standard barrel length: 60 cm (24"); standard stock length: 37 cm (14,5") incl.
15 mm (0,6") rubber recoil pad in black. Steel shot proofed depending on choke size.
Weight ca. 2.900 – 3.100 g.
C A L IB R E S A ND G AUGE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Classic Double rifle
▶▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS, 9.3x74R
Except for Classic “Big Five”.
Custom made.
1
2
13
Classic “Big Five” double rifle
▶▶ Rifle calibres: .375 Flanged Mag. N.E., .375 H&H Mag., .450/.400 N.E.,
.500/.416 N.E. (3 ¼"), .470 N.E., .500 N.E. (3")
Classic side-by-side shotgun
▶▶ Shotgun gauges: 20/76
Classic side-by-side rifle/shotgun combination
▶▶ Shotgun gauges: 20/76
▶▶ Rifle calibres: on request
ab
Custom calibres and gauges
1.215,00 €
CL A SSIC
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
1.623,00 €
Intelligent Ejector System (IES)
Fitting only possible for new guns, retro-fitting to existing guns is not offered.
168,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
122,00 €
Automatic set trigger release, per set trigger
Not in combination with single trigger or Krieghoff 1-2 trigger
544,00 €
Second set trigger installed in the rear trigger
Krieghoff 1-2 trigger
705,00 €
(Double trigger, front trigger works as set trigger)
Different barrel length
▶▶ 55 cm (22") for Classic double rifle (barrel length not available for Classic
“Big Five” double rifle)
544,00 €
Single combination trigger featuring set trigger device, non selective
544,00 €
Fixed firing sequence: right barrel – left barrel. Because of the fixed firing sequence,
this feature is not recommended for models with selective barrels, e. g. side-by-side
rifle/shotgun combination. Single triggers are generally available up to calibre .375,
but not in combination with the automatic set trigger release.
301,00 €
Krieghoff see through sight
For Classic double rifle and Classic “Big Five” double rifle
Folding and express sights
▶▶ Express sights with two folding leaves for Classic “Big Five” double rifle
▶▶ Express sights with two folding leaves for Classic “Big Five” double rifle;
Sighting-in distances and vertical gold lines inlaid into both fixed and
folding leaves.
642,00 €
1.076,00 €
215,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12.3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of
less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms
with two shotgun barrels, the group has to be less than 15 cm.
▶▶ Traditional soldered models:
One barrel on Classic side-by-side shotgun or rifle/shotgun combination
Both barrels on Classic side-by-side shotgun
1
Please pay attention to the instructions about “scope mounts” on page 64.
14
324,00 €
648,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
Classic Double rifle
▶▶ Pivot bridge mount
▶▶ Pivot bridge ring mount for driven hunt scopes 1
▶▶ Tip-off mount for red dot sight
1.124,00 €
1.265,00 €
748,00 €
Classic “Big Five” double rifle
▶▶ Pivot bridge mount
▶▶ Pivot bridge ring mount for driven hunt scopes 1
1.452,00 €
1.594,00 €
Fitting a base plate for pivot bridge mount
▶▶ For Classic side-by-side double rifle
▶▶ For Classic side-by-side shotgun and “Big Five” side-by-side double rifle
no extra charge
233,00 €
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶▶
▶▶
▶▶
▶▶
Interchangeable double rifle barrel
Interchangeable “Big Five” double rifle barrel
Interchangeable side-by-side shotgun barrel (gauge 20/76 only)
Interchangeable side-by-side rifle/shotgun combination barrel
(gauge 20/76 only)
▶▶ Additional charge for interchangeable barrel with ejectors 2
3.812,00 €
6.023,00 €
3.716,00 €
5.864,00 €
575,00 €
F L USH F I T T ING B R IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
1
2
3
Fitting of chokes, per barrel 3
Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 3
Briley Choke wrench 3
“Speed” wrench for quick choke changes (12 and 20 gauge) 3
Briely Special grease for choke 3
Krieghoff Container for three chokes 3
Briley Container for five chokes 3
Designated “driven hunt scopes” are scopes on which the objective diameter is the same as the middle tube diameter.
This kind of scopes can be mounted with the same distance in between the two mount bases as the regular pivot rail mount.
Only in conjunction with a receiver prepared for ejectors.
Position is not discountable.
15
141,00 €
96,00 €
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
CL A SSIC
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
S T O C K S & W O OD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
CL A SSIC
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a hand
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
2.916,00 €
3.789,00 €
4.625,00 €
Right-handed stock (hand-crafted) 1 ▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Forearm (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
194,00 €
447,00 €
Rubber recoil pad
322,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.050,00 €
Stock magazine with hinged cover plate
Ornamental line engraving to match receiver border included.
Other engravings upon request.
E XCL USI V E OP T IONS
3.038,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
2.307,00 €
“Imperial design”
Extended top tang, extended steel trigger guard, steel pistol grip cap, engraved serial
number into the trigger guard extension and Rigby-style cheekpiece 1.
Hand-polished stock-finish
949,00 €
Fine checkering instead of standard checkering 2
139,00 €
Skip checkering instead of standard checkering 2
94,00 €
1
2
Position is not discountable
Only available in conjunction with custom made stock
16
3.515,00 €
Full carving on grip and forearm 1
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 1
3.515,00 €
Checkering with carved border on grip and forearm 1
1.416,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
CL A SSIC
557,00 €
Ebony or rosewood cap on grip and forearm 1
S UR FAC E F INISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶▶
▶▶
▶▶
▶▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
483,00 €
199,00 €
729,00 €
MONO GR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering 2, see page 62
122,00 €
407,00 €
▶▶ Monograms
▶▶
▶▶
▶▶
▶▶
224,00 €
324,00 €
533,00 €
732,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶▶
▶▶
▶▶
▶▶
1
2
Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included
Trigger gold plated (for guns with only one trigger or single trigger option)
Double triggers gold plated
Only available in conjunction with custom made stock and forearm.
Only available in conjunction with custom made stock.
17
365,00 €
833,00 €
149,00 €
207,00 €
K R IEGHOF F HUB ER T US
Krieghoff Hubertus
Single shot rifle shown with additional options
Engraving: “Fine English with roses & bouquet”
HUBERT US
Hubertus standard configuration:
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Quick detachable sling swivels
▶ Nickel plated receiver finish
▶ Steel base plate
▶ Ornamental line engraved around receiver
border
▶ Hinge screws, top latch, screws and pins
are blued
▶ Standard wood
▶ Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
▶ Supplied in Krieghoff GunPack
Hubertus single shot rifle
Standard barrel length: 60 cm (24") or 55 cm (22") optionally; standard stock length:
37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black.
▶▶ Standard calibre
Action available in steel or duraluminium. Weight ca. 2.500 – 3.200 g.
▶▶ Magnum calibre
Action available in steel only. Weight ca. 2.900 – 3.200 g.
4.228,00 €
5.702,00 €
5.239,00 €
Hubertus single shot rifle with octagonal barrel
Action available in steel or duraluminium; sling swivel base is milled directly onto
the barrel. Weight ca. 2.600 – 3.300 g.
C A L IB R E S A ND G AUGE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Hubertus single shot rifle
▶▶ Standard calibre:
.222 Rem., .22–250 Rem., 5.6x50R Mag., 5.6x52R, .243 Win.1,
6x62R Frères 1, .270 Win., 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1,
.30R Blaser 1, 8x57IRS, 8x75RS, 9.3x74R
▶▶ Magnum calibre: 1
7mm Rem. Mag., 300 Win. Mag.
Hubertus single shot rifle with octagonal barrel
▶▶ 6.5x57R, 6.5x65R, 7x57R, 7x65R, .308 Win.1, .30–06 1, .30R Blaser 1
ab
Custom calibres and gauges
Further calibres and gauges on request.
1
For those calibres only steel action available.
18
1.215,00 €
A DDI T ION A L EQUIP MEN T
168,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
122,00 €
Automatic set trigger release
Different barrel length
▶▶ 55 cm (22") for Krieghoff Hubertus single shot rifle
no extra charge
Krieghoff see through sight
301,00 €
BreaKO recoil reducer
215,00 €
Fitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
HUBERT US
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared
for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this type of gun.
▶▶ Pivot bridge mount
768,00 €
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶▶
▶▶
▶▶
▶▶
Interchangeable barrel in standard calibre
Interchangeable barrel in magnum calibre (steel action only)
Interchangeable octagonal barrel in standard calibre
Interchangeable shotgun barrel gauge 28/76
1.972,00 €
3.446,00 €
2.987,00 €
1.972,00 €
S T O C K S & W O OD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
19
2.916,00 €
3.789,00 €
4.625,00 €
Right-handed stock (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Left-handed stock (hand-crafted) 1
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Forearm (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
194,00 €
447,00 €
Rubber recoil pad
322,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.050,00 €
Stock magazine with hinged cover plate
HUBERT US
Ornamental line engraving to match receiver border included.
Other engravings upon request.
E XCL USI V E OP T IONS
3.038,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
949,00 €
Fine checkering instead of standard checkering 2
139,00 €
Skip checkering instead of standard checkering 2
94,00 €
3.515,00 €
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
3.515,00 €
Checkering with carved border on grip and forearm 2
1.416,00 €
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
557,00 €
Ebony or rosewood cap on grip and forearm 2
SUR FAC E FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶▶
▶▶
▶▶
▶▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
1
Position is not discountable.
2
Only available in conjunction with custom made stock.
20
no extra charge
483,00 €
199,00 €
729,00 €
MONO GR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering 1, see page 62 122,00 €
407,00 €
Monograms
▶▶
▶▶
▶▶
▶▶
224,00 €
324,00 €
533,00 €
732,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
1
365,00 €
833,00 €
149,00 €
Only available in conjunction with custom made stock.
21
HUBERT US
Locks
▶▶ Internal lock parts nickel plated
▶▶ Internal lock parts gold plated, triggers not included
▶▶ Trigger gold plated
K R IEGHOF F SEMP R IO
Semprio standard configuration:
▶ Krieghoff In-Line action
▶ Set trigger integrated
▶ Universal Trigger System
▶ Combi-Cocking Device
▶ “Click-and-Go” sling swivels
▶ Take down (No tools required)
▶
▶
▶
▶
Prepared for Tip-off mount
(Krieghoff Pro Mount)
Black anodized action finish
Standard wood in oil finish
Supplied in Semprio GunPack
SEMPR IO
Krieghoff Semprio
In-Line repeater
Models: black anodized finish
Camouflage stock finish “Blaze Orange” (Fig. Top)
Thumb hole stock with Camouflage stock finish “Forest Green” (Fig. Bottom)
3.279,00 €
Semprio In-Line repeater in standard calibres
Standard barrel length: 55 cm (22"); magazine capacity: 4+1; standard stock length
37 cm (14,5"), incl. 15 mm (0,6") black rubber recoil pad in black; right-handed stock
with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads.
Weight ca. 3.400 g.
3.541,00 €
Semprio In-Line repeater in magnum calibres
Standard barrel length: 63 cm (25"); magazine capacity: 3+1; standard stock length
37 cm (14,5") incl. 15 mm (0,6") black rubber recoil pad in black; right-handed stock
with Semprio cheekpiece; Krieghoff see through sight with fluorescent beads.
Weight ca. 3.400 g.
C A L IB R E S A ND G AUGE S
Semprio In-Line repeater in standard calibres
▶▶ Rifle calibres: .223 Rem., .243 Win., 6.5x55 SE, .270 Win., 7x64, .308 Win.,
.30–06, 8x57IS, 9.3x62
Semprio In-Line repeater in magnum calibres
▶▶ Rifle calibres: 7 mm Rem. Mag., .300 Win. Mag., .375 Ruger 1
ab
Custom calibres and gauges
Further calibres and gauges on request.
1
Only available in standard barrel length 55 cm (22").
22
1.215,00 €
A DDI T ION A L EQUIP MEN T
Semprio In-Line Repeater
▶▶ Nickel plated action frame
▶▶ “Compact” version with additional sling swivels on the side of forend and
buttstock
▶▶ BreaKO recoil reducer
▶▶ Barrel porting (recoil and muzzle jump is reduced up to 35 %) ▶▶ Muzzle threading, depends on calibre (M14x1 or M15x1) ▶▶ “PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
▶▶ Fluted barrel – improves the temperature management of the barrel,
incl. “PH-ProCoating”
no extra charge
488,00 €
215,00 €
395,00 €
288,00 €
318,00 €
995,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
Fitting and sighting-in is already included.
664,00 €
711,00 €
748,00 €
IN T ERC H A NGE A B L E B A R R EL S & ACCE SS OR IE S
Interchangeable barrels
As a complete assembly, including wood forearm, magazine frame, but without
magazine and bolt head.
▶▶ Interchangeable barrel for standard calibre
▶▶ Interchangeable barrel for magnum calibre
1.434,00 €
1.695,00 €
Extra magazines 1
▶▶
▶▶
▶▶
▶▶
▶▶
Calibre group 1: .270 Win., .30–06, 7x64, 8x57JS, 6.5x55 SE
Calibre group 2: .308 Win., .243 Win.
Calibre group 3: 9.3x62
Calibre group 4: .300 Win. Mag., 7mm Rem. Mag., .375 Ruger,
Calibre group 5: .223 Rem.
89,00 €
89,00 €
89,00 €
89,00 €
89,00 €
Bolt heads 1
▶▶ Standard calibre, for calibre groups 1, 2 and 3
▶▶ Magnum calibre, for calibre group 4
▶▶ Small calibre, for calibre group 5
1
203,00 €
203,00 €
203,00 €
Position is not discountable.
23
SEMPR IO
Krieghoff Semprio ProMount
▶▶ Tip-off mounts for scopes with rail
▶▶ Tip-off mounts for scopes without rail (ring mount)
▶▶ Tip-off mounts for red dot sight
S T O C K S & W O OD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Stock
Oil finish; straight comb; stock length 37 cm (14,5") which already includes the
standard 15 mm (0,6") black rubber recoil pad. Standard wood grade or T-Wood
optionally, alternative camouflage finish in “Blaze Orange” or “Forest Green”.
▶▶ Stock without cheekpiece
▶▶ Right-handed stock with Semprio cheekpiece
▶▶ Left-handed stock with Semprio cheekpiece
no extra charge
no extra charge
237,00 €
Thumb hole stock Oil finish; straight comb; stock length 37 cm (14,5") which already includes the
standard 15 mm (0,6") black rubber recoil pad; wood category 001 1; alternative
camouflage finish in “Blaze Orange” or “Forest Green”.
▶▶ Thumb hole stock with Semprio cheekpiece, right-handed
▶▶ Thumb hole stock with Semprio cheekpiece, left-handed
471,00 €
708,00 €
Handmade stocks 1
▶▶ Stock hand-crafted
▶▶ Forearm hand-crafted
1.072,00 €
447,00 €
Alternative stock finish SEMPR IO
▶▶ T-Wood (walnut wood optically improved) 2
▶▶ Camouflage finish in “Blaze Orange” or “Forest Green”
no extra charge
no extra charge
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks 5
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
2.916,00 €
3.789,00 €
4.625,00 €
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering 3, see page 62 122,00 €
407,00 €
Interchangeable Stocks
See description above
▶▶ Right-handed stock with Semprio cheekpiece
▶▶ Left-handed stock with Semprio cheekpiece
▶▶ Right-handed thumb hole stock with Semprio cheekpiece
▶▶ Left-handed thumb hole stock with Semprio cheekpiece
1
2
Not available for hand-crafted stock.
Only wood category 001 available – other categories on request.
3
Only available in conjunction with custom made stock.
24
642,00 €
885,00 €
1.113,00 €
1.349,00 €
K R IEGHOF F T RUMP F
Krieghoff Trumpf
Double rifle drilling shown with additional options
and Ornamental line engraving borders receiver
Trumpf standard configuration:
▶ Classic three lock drilling
▶ Separate manual cocking device for rifle barrel
▶ Set trigger integrated in the front trigger
▶ Universal Trigger System
▶ Steel trigger guard
▶ Front plate for pivot bridge mount
▶ Steel shot proofed depending on choke size and
material of the receiver
▶ Steel base plate
▶ Quick detachable sling swivels
▶ Nickel plated receiver finish
▶ Ornamental line engraved around receiver
border
▶ Hinge screws, top latch, screws and pins
are blued
▶ Standard wood
▶ Right-handed stock with Bavarian-style
cheekpiece and “Schnabel” forearm
▶ Supplied in Krieghoff GunPack
8.171,00 €
Trumpf 12 and 20 drilling thermo stable
8.477,00 €
Trumpf 12 and 20 drilling traditionally soldered
Action available in steel or duraluminium; standard barrel length: 60 cm (24”),
or 55 cm (22“) optionally; standard stock length: 37 cm (14,5”) incl. 15 mm (0,6”)
rubber recoil pad in black.
Weight (Trumpf 12) ca. 3.500 – 3.900 g. Weight (Trumpf 20) ca. 3.300 – 3.700 g.
9.456,00 €
Trumpf 20 double rifle drilling
Steel receiver; standard barrel length: 55 cm (22"), or 60 cm (24“) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6") rubber recoil pad in black. Weight
ca. 4.000 g.
C A L IB R E S A ND G AUGE S
Rimless cartridges require the installation of a spring-loaded extractor claw. Extra cost regarding this
feature can be found under category “additional equipment”.
Trumpf 12 and 20 drilling thermo stable and drilling traditionally soldered
▶▶ Rifle calibres: 6,5x57R, 6,5x65R, 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser,
8x57IRS, 8x75RS, 9,3x74R
▶▶ Trumpf 12 duraluminium receiver, standard gauge 12/70
▶▶ Trumpf 12 steel receiver, standard gauge 12/76
▶▶ Trumpf 20, standard gauge 20/76
▶▶ Choke: 1/2–3/4
Trumpf 20 double rifle drilling
▶▶ Rifle calibres: 7x57R, 7x65R, .308 Win., .30–06, .30R Blaser, 8x57IRS, 8x75RS,
9.3x74R
▶▶ Shotgun gauge: 20/76
▶▶ Choke: 3/4
25
T RUMPF
Action available in steel or duraluminium; standard barrel length: 55 cm (22"),
or 60 cm (24“) optionally; standard stock length: 37 cm (14,5") incl. 15 mm (0,6")
rubber recoil pad in black. Weight ca. 3.400 – 3.800 g.
ab
Custom calibres and gauges
1.215,00 €
Further calibres and gauges on request.
A DDI T ION A L EQUIP MEN T
168,00 €
Spring loaded extractor claws, per barrel
For rimless cartridges
544,00 €
Second set trigger installed in the rear trigger
Different barrel length
▶▶ 60 cm (24") for thermo stable model Trumpf drilling
▶▶ 55 cm (22") for traditionally soldered model Trumpf drilling
544,00 €
544,00 €
Cosmetic sideribs for models thermo stable
342,00 €
The cosmetic siderib (available in different heights) is generally fitted after the rifle
is sighted-in. For technical and aesthetic reasons, we strongly recommend that the
scope mounting and sighting-in process is carried out at the factory. Not available
for Trumpf 12 featuring 60 cm (24") barrel length.
301,00 €
Krieghoff see through sight
For Trumpf double rifle drilling
97,00 €
2-way flip sight
For Trumpf drilling. Wide U-shaped middle sight for shotshell and slug use.
Fine U-shaped sight for rifle use.
215,00 €
BreaKO recoil reducer
Fitting included (weight: 350 g/12,3 oz, diameter: 22,5 mm, length: 100 mm)
Shotgun barrels sighted-in with slugs according to “Langenhagener Norm”: 1
T RUMPF
Shotgun barrels sighted-in according to “Langenhagener Norm” require a group of
less than 10 cm with 5 slugs fired at a distance of 50 meters. In cases of fire arms
with two shotgun barrels, the group has to be less than 15 cm.
▶▶ Models thermo stable:
One barrel on Trumpf 12 and 20 thermo stable
Both barrels on Trumpf 12 and 20 thermo stable
▶▶ Traditional soldered models:
One barrel on Trumpf drilling, double rifle drilling
Both barrels on Trumpf drilling
164,00 €
381,00 €
324,00 €
648,00 €
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
S COP E MOUN T S
All models are equipped with a compact short rib for maximum strength and durability, and are prepared for the pivot bridge mount – In our view the best and most aesthetically pleasing mount for this
type of gun.
Trumpf 12 and 20 drilling thermo stable
▶▶ Pivot bridge mount
815,00 €
Trumpf 20 double rifle drilling
▶▶ Pivot bridge mount
▶▶ Tip-off mount for red dot sight
1
1.124,00 €
748,00 €
Please pay attention to the instructions about “scope mounts” on page 64.
26
IN T ERCH A NGE A B L E B A R R EL SE T S
Interchangeable barrel sets together with the complete forend wood assembly in standard grade wood.
Barrel fitting, proof testing and sighting-in are included.
▶▶ Interchangeable drilling barrel, thermo stable 1
▶▶ Interchangeable drilling barrel, traditionally soldered
▶▶ Interchangeable double rifle barrel, traditionally soldered
(only Trumpf 20)
3.854,00 €
4.180,00 €
5.220,00 €
F L USH F I T T ING B R IL E Y CHOK E INS TA L L AT ION
Flush at the barrel muzzle. Available in 12 and 20 gauge in the following constrictions:
Cylinder (Cyl), Skeet (Sk), 1/4 (IC), 1/4–1/2 (LM), 1/2 (M), 3/4 (IM), 3/4–1/1 (LF), 1/1 (F), Super-1/1 (XF)
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
Fitting of chokes, per barrel 2
Briley screw-in choke, suitable for lead or steel shot (12 and 20 gauge) 2
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Briley Special grease for choke
Krieghoff Container for three chokes
Briley Container for five chokes
141,00 €
96,00 €
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
S T O C K S & W O OD W OR K
Wood upgrade
▶▶
▶▶
▶▶
▶▶
339,00 €
812,00 €
1.189,00 €
1.599,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
2.916,00 €
3.789,00 €
4.625,00 €
Right-handed stock (hand-crafted) 2
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
737,00 €
1.072,00 €
Left-handed stock (hand-crafted) 2
Left-handed stocks are always hand-crafted, to be able to offer all stock configurations also to left-handed shooters.
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
1
The gauge of the interchangeable barrel has to be the same as the gauge of the original barrel.
2
Position is not discountable.
27
737,00 €
1.072,00 €
T RUMPF
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Forearm (hand-crafted) 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications, beavertail or
semi-beavertail forearm
194,00 €
447,00 €
Rubber recoil pad
322,00 €
With leather cover; black or brown; 15, 20 or 25 mm; fitting included
1.050,00 €
Stock magazine with hinged cover plate
Ornamental line to match receiver border included.
Other engravings upon request.
E XCL USI V E OP T IONS
3.038,00 €
“Façon Exclusive”
The final shape and finish of the action body and furniture is individually created
by the use of hand tools.
Hand-polished stock-finish
949,00 €
Fine checkering instead of standard checkering 2
139,00 €
Skip checkering instead of standard checkering 2
94,00 €
3.515,00 €
Full carving on grip and forearm 2
Full carving with leaf arabesques, English arabesques, enhanced English arabesques
or oak leaves.
Fish scale checkering instead of standard checkering on grip and forearm 2
3.515,00 €
Checkering with carved border on grip and forearm 2
1.416,00 €
T RUMPF
Checkering surrounded by leaf arabesques, English arabesques, enhanced English
arabesques or oak leaves.
557,00 €
Ebony or rosewood cap on grip and forearm 2
SUR FAC E FINISH
Models featuring steel receivers in combination with steel base plates, can optionally be blued or
nitrated.
▶▶
▶▶
▶▶
▶▶
Blued surface finish
Nitrated surface finish
Complete nickel finish of all external parts
“PH-ProCoating” (corrosion resistant Ilaflon-Coating for barrel and receiver)
no extra charge
483,00 €
199,00 €
729,00 €
MONO GR A M S & L O CK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the trigger guard.
Monogram plate, finished the same as the receiver
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap fully covering 2, see page 62
1
Position is not discountable.
2
Only available in conjunction with custom made stock.
122,00 €
407,00 €
28
Monograms
▶▶
▶▶
▶▶
▶▶
224,00 €
324,00 €
533,00 €
732,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶▶ Internal lock parts nickel plated
▶▶ Internal lock parts gold plated, triggers not included
▶▶ Double triggers gold plated
365,00 €
833,00 €
207,00 €
K R IEGHOF F INSER T B A R R EL “K S” 1
The insert barrel “KS” can be sighted-in without removing it from the carrier barrel as adjustment is
done at the muzzle of the insert barrel. The listed prices include fitting, proof testing and sighting-in.
Drillings featuring light weight receivers, made from Duraluminium can only be equipped with
.22 Hornet calibres and only if the lock up of the gun is in good condition.
Gauge 12
▶▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage, 6.5x57R, 7x57R, 7x65R,
.30R Blaser, 8x57IRS, 8x75RS
▶▶ .308 Win., .30–06, 9.3x74R
1.550,00 €
1.876,00 €
Gauge 20
▶▶ .22 Hornet, .222 Rem., 5.6x50R Mag., 5.6x52R Savage
▶▶ 6.5x57R, 7x57R, 7x65R, .30R Blaser, 8x57IRS, 8x75RS
▶▶ .308 Win., .30–06, 9.3x74R
price on request
T RUMPF
EL 22 and EL 44
1.550,00 €
1.769,00 €
1.876,00 €
1
The Krieghoff Insert Barrel “KS” is not suitable for barrels equipped with Briley chokes.
29
K R IEGHOF F K- 80, K-20 A ND K X- 6
K R IEGHOF F K- 80 W I T H FI X ED CHOK E S
K-80 standard configuration with fixed chokes:
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶ Selectable, mechanical single trigger
▶ Length adjustable trigger blade
▶
▶
▶
▶
▶
Light scroll engraving pattern
Adjustable comb
Standard wood
Stock finish: epoxy
Supplied in a gun case
You can find the available gauges of the different K-80 variations in the K-80 Matrix on page 38.
Please find optional Briley screw-in chokes can be found under category “Service” on page 55.
K-80 Sporting shown with additional options and custom engraving
11.334,00 €
K-80 Sporting – Trap – Skeet
Barrel length: 76 cm (30") or 81 cm (32"); free-floated barrel set; various stocks­for
Sporting/International Skeet or Trap, featuring Monte Carlo or straight style; forearm
styles can be individually selected.
K-80 Sporting/Skeet, Weight ca. 3.950 g 1. Trap, Weight ca. 4.070 g 1.
SP ORT
K-80 Parcours shown with additional options and custom engraving
11.852,00 €
K-80 Parcours
Barrel length: 71 2 (28"), 76 (30") or 81 cm (32"); full length soldered barrel set;
“Parcours” stock, right-handed; fixed comb; “Parcours” forearm.
Optionally available with non-adjustable comb and oil finish.
Weight with adjustable comb ca. 3.620 g 1.
Weight with non-adjustable comb ca. 3.610 g 1.
1
Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood. 2
Only available with Briley chokes.
30
K R IEGHOF F K- 80 W I T H S CR E W- IN CHOK E S
K-80 standard configuration with screw-in chokes:
▶ Free-floated barrel set
▶ Extended factory screw-in chokes, incl. five
steel choke tubes and choke wrench
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶ Selectable, mechanical single trigger
▶
▶
▶
▶
▶
▶
Length adjustable trigger blade
Light scroll engraving pattern
Adjustable comb
Standard wood
Stock finish: epoxy
Supplied in a gun case
You can find the available gauges of the different K-80 variations in the K-80 Matrix on page 38.
K-80 Sporting shown with additional options and custom engraving
11.860,00 €
K-80 Sporting
SP ORT
Barrel length: 71 (28”), 76 (30”) or 81 cm (32”); soldered rib: 10 mm taper flat;
“Sporting” stock with “Schnabel” forearm. Weight ca. 3.980 g 1.
K-80 ProSporter shown with additional options and engraving option “Renaissance”
12.437,00 €
K-80 ProSporter
Barrel length: 76 (30”) or 81 cm (32”); adjustable rib: 10 mm tapered (12 mm with
chamfer); “Pro­­Sporter” stock with “Schnabel” forearm stock. Weight ca. 4.120 g 1.
Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
1
31
K-80 Trap shown with additional options and engraving option “Super Scroll”
11.860,00 €
K-80 Trap
Barrel length: 76 (30") or 81 cm (32"); soldered rib: 12 mm taper step; Monte Carlo
style “Trap” right-handed stock with “Trap” forearm. Weight ca. 4.120 g 1.
K-80 ProTrap shown with additional options and engraving option “Heritage Game I”
12.437,00 €
K-80 ProTrap
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: 10 mm tapered (12 mm with
chamfer); highest selectable shot pattern: 70/30; “ProTrap” right-handed stock with
“Trap” forearm. Weight ca. 4.070 g 1.
K-80 Trap Special shown with additional options and adjustable butt plate
as well as engraving option “Vintage Scroll”
12.612,00 €
K-80 Trap Special
SP ORT
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: “Trap Special” 10 mm tapered
(12 mm with chamfer); highest selectable shot pattern: 100 % (optionally “Pro”
rib featuring 120 % high pattern); “Trap Special Rollover” right-handed stock with
“Trap” forearm. Weight ca. 4.310 g 1.
K-80 Double Trap Special shown with additional options and blued
engraving option “Gold Standard”
12.962,00 €
K-80 Double Trap Special
Barrel length: 76 (30") or 81 cm (32"); adjustable rib: “Double Trap Special” 10 mm
tapered (12 mm with chamfer); highest selectable shot pattern: 100 %; “Trap Special”
right-handed stock, including an additional higher comb in black (see picture above);
“Trap” forearm. Weight ca. 4.410 g 1.
Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
1
32
K R IEGHOF F K-20
K-20 standard configuration:
▶ Free-floated barrel set
▶ Extended factory screw-in chokes, incl. five
steel choke tubes and choke wrench
▶ Nickel plated steel action
▶ Hinge screws, top latch, screws and pins
are blued
▶
▶
▶
▶
▶
▶
Selectable, mechanical single trigger
Length adjustable trigger blade
Light scroll engraving pattern
Standard wood
Stock finish: epoxy
Supplied in a gun case
For available gauges of the K-20 variants, see page 34.
K-20 Sporting and Hunting Gun shown with additional options
and engraving option “Parcours Special”
11.860,00 €
K-20 Sporting and Hunting Gun
Barrel length: 76 (30") or 81 cm (32"); soldered rib: 10 mm taper flat, soldered;
non-adjustable “Sporting” stock with “Schnabel” forearm. Weight ca. 3.500 g 1.
K-20 ProSporter shown with additional options and custom engraving
12.437,00 €
K-20 ProSporter
Barrel length: 76 (30") and 81 cm (32"); 10 mm tapered (12 mm with chamfer);
adjustable “ProSporter” right-handed stock with “Schnabel” forearm.
Weight ca. 3.690 g 1.
KX-6 standard configuration:
▶ Nickeled action finish
▶ Extended factory screw-in chokes, incl. three
choke tubes and choke wrench;
SP ORT
K R IEGHOF F K X- 6 SP ECI A L
▶ Length adjustable trigger blade
▶ Supplied in a gun case
KX-6 Single Barrel Shotgun in standard configuration
5.265,00 €
KX-6 – Single barrel shotgun
Barrel length: 86 cm (34"); adjustable rib 12 mm taper flat; right-handed Monte Carlo
“Trap” stock with adjustable comb and “Trap” forearm. Weight ca. 3.890 g 1.
Sample weight, barrel length 76 cm (30”), cal. 12/76. Declarations of weight can differ up to 10% due to the natural material of wood.
1
33
S TA ND A R D G AUGE S
K-80
▶▶ 12/76 (3"), 20/76 (3"), 28/76 (3"), chambers are chrome plated
▶▶ .410/76 (3"), chambers are not chrome plated
K-20
▶▶ 20/76 (3"), 28/76 (3"), chambers are chrome plated
▶▶ .410/76 (3"), chambers are not chrome plated
KX-6
▶▶ 12/76 (3"), chambers are chrome plated
A list of all available barrel set combinations is shown on page 38.
A DDI T ION A L EQUIP MEN T
Krieghoff Balance System 1
▶▶ Barrel weight for K-80, gauge 12, per item
The barrel can be provided with up to three additional 40 g weights underneath
the forend, thus making an increase of 120 g at the front end possible.
▶▶ Stock weight for K-80
The buttstock can be equipped with a special stock bolt, which is 40 g heavier
than a standard stock bolt, and can accept up to three additional 30 g weights.
Thus, making buttstock up to 130 g heavier.
Price for stock screw including on extra weight
Price for further extra weights, per item
89,00 €
110,00 €
47,00 €
Adjustable butt plate
389,00 €
575,00 €
For K-80 Trap variants and KX-6 (Does not include pad)
For all other K-80s (Includes recoil pad)
26,00 €
Length of pull adjustment option
For K-80 and KX-6 – Length of pull can be easily adjusted with the addition of
optional pre-fitted 6,4 mm (1/4") spacers. Only in conjunction with adjustable butt
plate. Price per item.
279,00 €
Barrel porting
For gauge 12 – recoil and muzzle jump is reduced. Price per barrel.
SP ORT
+10%
“Matched Pairs”
Upcharge of 10% with any order of a matching pair. This includes consecutive
numbers and Stocks matching in colour, figure and weight. Both guns are identically
balanced.
47,00 €
Krieghoff HiViz Pro Shotgun Sight
ENGR AV INGS
A display of our engraving motifs as well as custom engravings can be found on page 44.
SUR FAC E FINISH
▶▶ Blued action and forend iron, including all external metal parts
▶▶ Complete nickel finish of all external metal parts
▶▶ Nitrate surface treatment of action and forend iron, including all
external metal parts
1
Position is not discountable.
34
no extra charge
131,00 €
475,00 €
IN T ERCH A NGE A B L E B A R R EL S
Please find a table of the interchangeable barrel options on page 38. Barrels do not include a forearm.
Interchangeable barrel K-80 with fixed chokes
▶▶ K-80 Sporting/Skeet
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32")
▶▶ K-80 Trap
Free-floated barrel set; barrel length: 76 (30") or 81 cm (32")
▶▶ K-80 Parcours
Full length soldered barrel set; barrel length: 71 1 (28"), 76 (30") or 81 cm (32")
Forend hanger for adapting free-floated barrel sets optional available
▶▶ K-80 Trap Special/ProSporter/ProTrap
3.770,00 €
3.770,00 €
4.201,00 €
price on request
Interchangeable barrel K-80 with screw-in chokes
Free-floated barrel set; extended factory screw-in chokes, including two choke tubes
and choke wrench
▶▶ K-80 Trap
Rib: 12 mm taper step, soldered; barrel length: 76 (30") or 81 cm (32")
▶▶ K-80 ProTrap/K-80 ProSporter
Gauge: 12/76, 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable;
barrel length: 76 (30”) or 81 cm (32”)
▶▶ K-80 Trap Special
Rib: “Trap Special” 10 mm taper flat, adjustable; highest selectable shot
pattern: 100 % (alternative “Pro” rib with 120 % high pattern);
barrel length: 76 (30") or 81 cm (32")
▶▶ K-80 Double Trap Special 2
Rib: “Double Trap Special” 10 mm taper flat, adjustable; barrel length:
76 (30") or 81 cm (32")
▶▶ K-80 Sporting/Skeet
Gauge: 12/76, 20/76 3, 28/76 3, .410/76 3; Rib: 10 mm taper flat, soldered;
barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶▶ K-80 Unsingle/Topsingle
Rib: 12 mm taper step, adjustable; barrel length: 86 cm (34")
4.303,00 €
4.878,00 €
4.878,00 €
5.007,00 €
4.303,00 €
5.868,00 €
Interchangeable barrel K-20 with screw-in chokes
4.303,00 €
4.878,00 €
CHOK E T UB E S
97,00 €
Factory screw-in chokes, 12, 20, 28 and .410 gauge
It is not possible to retrofit factory choke tubes to fixed choke barrels. See Briley
option below.
Available in the following constrictions:
Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2 (1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4),
Super-1/1 (5). Super full choke tubes only available for 12 gauge.
3
1
2
Only available with Briley chokes.
When using this barrel you may need a higher comb. Price on request.
71 cm (28") barrel length on request.
35
SP ORT
Free-floated barrel set; extended factory screw-in chokes, including two choke tubes
and choke wrench
▶▶ K-20 Sporting
Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, soldered;
barrel length: 71 (28"), 76 (30") or 81 cm (32")
▶▶ K-20 ProSporter
Gauge: 20/76 , 28/76, .410/76; Rib: 10 mm taper flat, adjustable;
barrel length: 76 (30") or 81 cm (32")
141,00 €
Flush fitted screw-in chokes by Briley, 12 and 20 gauge 1
Subsequent fitting of Briley chokes possible for shotgun barrels with fixed chokes,
also for barrels from other brands. Technical requirements will be checked carefully
by our master gunsmiths before fitting. Price per barrel.
96,00 €
Briley screw-in chokes 1
Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2
(1+), 1/2 (2), 3/4 (3), 3/4–1/1 (LF), 1/1 (4), Super-1/1 (XF)
One inch extended, non-ported Briley choke tubes are available on request.
Titanium screw-in chokes, 12 and 20 gauge
For all guns featuring factory screw-in chokes.
Available in the following constrictions: Cylinder (00), Skeet (0), 1/4 (1), 1/4–1/2
(1+), 1/2 (2), 1/2–3/4 (2+), 3/4 (3), 1/1 (4), Super-1/1 (5)
▶▶ Titanium screw-in chokes (color: silver)
▶▶ Titanium screw-in chokes in gold
159,00 €
211,00 €
Accessories
▶▶
▶▶
▶▶
▶▶
▶▶
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Special grease for chokes
Container for three chokes
Container for five chokes
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
T I TA NIUM OP T IONS
Upcharge for titanium option instead of the standard configuration made of steel.
Titanium options
▶▶ Titanium trigger (including trigger group)
▶▶ Titanium front hanger
▶▶ Five titanium screw-in chokes of the standard configuration
110,00 €
52,00 €
306,00 €
Titanium options in gold
▶▶ Titanium trigger (including trigger group), in gold
▶▶ Titanium front hanger, in gold
▶▶ Five titanium screw-in chokes of the standard configuration, in gold
279,00 €
156,00 €
567,00 €
SP ORT
S T O C K S & W O OD W OR K
A custom fit stock is almost entirely hand made with only minimal pre-machining.
Atypical stock dimensions and longer stock lengths generally require a custom fit stock.
Further information on request.
Wood Upgrade
▶▶
▶▶
▶▶
▶▶
452,00 €
1.022,00 €
1.508,00 €
2.025,00 €
Category 001
Category 002
Category 003
Category 004
Exclusive wood categories as stock blanks (hand-crafted)
Due to the high cost of raw materials, wood grades higher than 004 require a custom
made stock.
▶▶ Category C1
▶▶ Category C2
▶▶ Category C3
1
Position is not discountable.
36
2.916,00 €
3.789,00 €
4.625,00 €
Stock in oil or epoxy finish 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
▶▶ Special dimensions, custom made stock with ergonomic grip and finger grooves
737,00 €
1.072,00 €
1.601,00 €
Stock with adjustable comb and oil or epoxy finish 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
▶▶ Special dimensions, custom made stock with ergonomic grip and finger grooves
30 minutes test shooting for custom made stocks on clay shooting range 1
1.160,00 €
1.494,00 €
2.033,00 €
150,00 €
Forearm in oil or epoxy finish 1
▶▶ Standard dimensions
▶▶ Special dimensions, made to customer’s specifications
194,00 €
447,00 €
Additional charge for left-handed stocks (in standard dimensions)
340,00 €
(Not for K-20 Sporting)
Interchangeable stocks with adjustable comb and epoxy finish
▶▶ “Trap” Monte Carlo, ProTrap or “International Skeet/Sporting” stock,
model K-80
▶▶ “ProSporter” stock, model K-80 or K-20
▶▶ “Trap Special Rollover” stock, model K-80
1.139,00 €
1.139,00 €
1.312,00 €
Interchangeable stocks with non-adjustable comb and epoxy finish
▶▶ “Sporting and Hunting Gun”, model K-80 or K-20
1.139,00 €
Interchangeable forearm (forend iron not included) in oil or epoxy finish
▶▶ “Trap” or “Skeet”, model K-80
▶▶ Schnabel forearm, model K-80 or K-20
▶▶ “Parcours” forearm, model K-80
201,00 €
201,00 €
201,00 €
MONO GR A MS & L OCK S
Monograms can be engraved into a separate steel plate, which is fitted into the pistol grip of the rear
stock. Optionally, the monogram can be integrated into the top latch or the trigger guard.
138,00 €
403,00 €
Monograms
▶▶
▶▶
▶▶
▶▶
254,00 €
368,00 €
601,00 €
821,00 €
Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold
Locks
▶▶
▶▶
▶▶
▶▶
Position is not discountable.
Only available in conjunction with custom made stock.
1
2
416,00 €
941,00 €
168,00 €
279,00 €
Internal lock parts nickel plated
Internal lock parts gold plated, trigger not included
Trigger gold plated (including trigger group)
Titanium trigger (including trigger group), in gold
37
SP ORT
Monogram plate, finished the same as the receiver 2
▶▶ Inlet into pistol grip cap
▶▶ Steel pistol grip cap ●
●
—
Skeet
86 cm | 34”
—
—
—
—
●
●
—
—
—
—
—
—
71 cm | 28"
—
—
—
●
—
●
●
●
76 cm | 30"
●
81 cm | 32"
Standard version (no extra charge)
Optional
Not available
●
●
—
Trap
●
○
—
●
●
○ 4
Sporting
—
Parcours
—
Topsingle
—
●
—
Unsingle
●
●
●
—
Double Trap Special
●
●
—
—
Trap Special
●
●
—
—
ProTrap
●
●
—
—
Trap
●
●
●
81 cm | 32"
●
●
71 cm | 28"
—
76 cm | 30"
ProSporter
Sporting/Skeet
71 cm | 28"
4
3
2
1
—
—
76 cm | 30"
81 cm | 32"
●
●
71 cm | 28"
—
—
●
●
76 cm | 30"
Only available in calibre 12 and 20
Tapered step rib
12–8 mm tapered rib with chamfer
Only available with Briley chokes
●
●
●
●
81 cm | 32"
Width in mm
—
—
●
—
—
—
—
—
—
—
8–6
Barrel length
●
—
—
●
● 3
● 3
● 3
—
● 3
●
10–6
Barrel length
1/2–3/4
—
—
●
—
MOD-IMOD
Fixed chokes
—
●
●
●
●
○
○
○
○
○
○
○
Screw-in chokes
CHOKE-TYPE
—
—
—
—
●
●
●
●
●
●
Other barrel and rib models on request.
—
● 2
—
—
—
—
—
● 2
—
—
12–8
Barrel length
3/4–4/4
Barrel length
IMOD-FULL
RIB
Skeet
CALIBRE .410
Sk–Sk
CALIBRE 28
opening
CALIBRE 20
Krieghoff
Steel
CALIBRE 12
—
—
—
—
●
●
●
●
●
●
Krieghoff
Titanium 1
K- 80 M AT R I X B A R R E L S E T C O M B I N AT I O N S
SCREW-IN CHOKES
FIXED CHOKES
○
○
○
○
—
—
—
—
—
—
Briley
ThinWall 1
SP ORT
38
76 cm | 30"
1.583 g
1.607 g
1.350 g
1.583 g
—
—
1.700g
1.690g
1.682g
1.633g
1.682g
1.618g
1.626 g
1.634 g
1.378 g
1.626 g
—
—
1.756 g
1.776 g
1.726 g
1.675 g
1.726 g
1.669 g
81 cm | 32"
Deviations possible
—
Skeet
—
Sporting
—
—
Topsingle
Trap
—
Unsingle
1.280 g
—
Double Trap Special
Parcours
—
Trap Special
—
Trap
—
—
ProSporter
ProTrap
1.540 g
71 cm | 28"
Sporting/Skeet
86 cm | 34”
—
—
—
—
—
—
—
71 cm | 28"
SP ORT
1.732 g
1.733 g
—
—
—
—
—
—
—
1.715 g
1.680 g
76 cm | 30"
1.378 g
1.768 g
1.730 g
Barrel length
—
—
71 cm | 28"
Barrel length
1.719 g
1.666 g
76 cm | 30"
Barrel length
81 cm | 32"
CALIBRE 28
1.767 g
1.713 g
81 cm | 32"
CALIBRE 20
Barrel length
CALIBRE .410
—
—
71 cm | 28"
CALIBRE 12
1.741 g
1.705 g
76 cm | 30"
Gewicht Wechselläufe K-80
1.789 g
1.769 g
81 cm | 32"
K- 80 M AT R I X B A R R E L S E T W E I G H T S A N D O P T I O N S
WECHSELCHOKE
FESTCHOKE
39
Weight of choke tubes exemplary for 1/2 choke, cal. 12
Weight exemplary for front hanger No. 4
2
1
K-80 case complete— 1.060 g
Weight of case
Titanium front hanger — 8 g 2
Steel front hanger — 12 g 2
Titanium trigger, short — 5 g
Steel trigger, short — 10 g
Titanium trigger, long — 5 g
Steel trigger, long — 10 g
Titan options
Factroy screw-in chokes — 24 g1
Briley screw-in chokes — 14 g1
Titan screw-in chokes — 18 g1
Choke Tubes
Adjustable butplate
(Assembly group incl. pad) — 273 g
Spacer — 24 g
Additional equipment
K - 80 , K -20 S T O C K D I M E N S I O N S
u
x
x
x
v
w
u Aiming line (Height of rib)
v Length of pull
w Length of grip
xDrop
yPitch
zCast
z
z
u
Length of grip
Sporting/Skeet
365 mm
14,37“
91 mm
3,58”
40 mm
1,57”
55 mm
2,16”
68 mm
2,68”
4 mm
0,16”
11 mm
0,43”
7°
ProSporter
365 mm
14,37“
89 mm
3,50”
40 mm
1,57”
55 mm
2,16”
68 mm
2,68”
3 mm
0,12”
11 mm
0,43”
7°
365 mm
96 mm
40 mm
—
52 mm
6 mm
9 mm
14,37“
3,78“
1,57”
—2
2,05”
0,24”
0,35”
365 mm
91 mm
45 mm
45 mm
53 mm
3 mm
9 mm
K-80
Parcours
Trap
ProTrap
Trap Special
Doppeltrap Special
K-20
SP ORT
Length of pull
Sporting 1
ProSporter
Drop
2
Cast
Pitch
14,37“
3,58”
1,77”
1,77”
2,09”
0,12”
0,35”
365 mm
89 mm
45 mm
45 mm
54 mm
3 mm
9 mm
14,37“
3,50”
1,77”
1,77”
2,13“
0,12”
0,35”
365 mm
93 mm
41 mm
41 mm
67 mm
3 mm
13 mm
14,37“
3,66“
1,61”
1,61”
2,24”
0,12”
0,51”
365 mm
93 mm
41 mm
41 mm
82 mm
3 mm
13 mm
14,37“
3,66“
1,61”
1,61”
3,23”
0,12”
0,51”
365 mm
97 mm
38 mm
56 mm
68 mm
5 mm
6 mm
14,37“
3,82“
1,50”
2,20”
2,68”
0,20”
0,24”
365 mm
97 mm
38 mm
54 mm
67 mm
3 mm
8 mm
14,37“
3,82“
1,50”
2,13”
2,64”
0,12”
0,31”
5°
0°
0°
0°
0°
7°
7°
Adjustable combs can be adjusted 14 mm upwards and respectively 5 mm left and right of the cast.
1 All stocks, except for the K-20 Sporting, are available as right- and left-handed stock.
2 Straight comb (without Monte-Carlo)
40
K R IEGHOF F E SSENCI A
Essencia side-by-side shotgun standard configuration:
▶ Round-bodied steel receiver
▶
▶Sidelocks
▶
▶ Purdey-style third bite
▶ Double barrel-hook lock-up
▶
▶Ejectors
▶
▶ Fine English scroll engraving with gold
▶
accented inlays
Color case-hardened finish
Choice of straight-grip or Prince-of-Wales
pistol grip stock
Wood category 003
Traditional Tru-Oil finish
Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock side-by-side shotgun
Essencia 12 side-by-side shotgun
▶▶ Gauge: 12/70; Barrel length: 71 cm (28"), 76 cm (30")
32.023,00 €
Essencia 20 side-by-side shotgun
▶▶
▶▶
▶▶
▶▶
Gauge: 20/76; barrel length: 68 cm (27"), 71 cm (28"), 76 cm (30")
Gauge: 16/70; barrel length: 71 cm (28")
Gauge: 16/70; barrel length: 76 cm (30")
Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30")
31.663,00 €
31.663,00 €
32.091,00 €
32.649,00 €
Essencia 28 side-by-side shotgun
▶▶ Gauge: 28/76; barrel length: 71 cm (28"), 76 cm (30")
▶▶ Gauge: .410/76; barrel length: 71 cm (28")
35.715,00 €
36.994,00 €
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
Optional single trigger
1.283,00 €
20 gauge barrel; without forearm
16 gauge barrel; barrel length: 71 cm (28") including forearm
16 gauge barrel; barrel length: 76 cm (30") including forearm
28 gauge barrel; with forearm
9.791,00 €
12.370,00 €
12.816,00 €
13.363,00 €
Interchangeable barrels for 28 gauge frame
▶▶ 28 gauge barrel; without forearm
▶▶ .410/76 gauge barrel; barrel length: 71 cm (28") including forearm
10.903,00 €
14.207,00 €
+10%
“Matched Pairs”
Upcharge of 10% with any order of a matching pair. This includes consecutive
numbers and Stocks matching in colour, figure and weight. Both guns are identically
balanced.
41
ESSENCI A
Interchangeable barrels for 20 gauge frame
▶▶
▶▶
▶▶
▶▶
Essencia single shot rifle standard configuration:
▶
Round-bodied steel receiver
▶Sidelocks
▶
Double barrel-hook lock-up
▶
Barrel length: 60 cm (24")
▶
Octagonal barrel
▶
Color case-hardened finish
▶
▶
▶
▶
▶
Fine English scroll engraving with gold
accented inlays
Stock with cheeckpiece
Wood category 003
Traditional Tru-Oil finish
Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock single shot rifle
35.885,00 €
Essencia single shot rifle
AVA IL A B L E C A L IB R E S
Available in the following constrictions:
.243 Win., 6.5x57R, 6.5x65R, .270 Win., 7x57R, 7x65R, .308 Win., .30–06,
.30R Blaser, 8x57IRS, 8x75RS, 9.3x74R
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
Ejector
4.784,00 €
Fluted octagonal barrel
1.367,00 €
Full length stock (“Stutzen”)
2.223,00 €
10.319,00 €
Interchangeable barrel without forearm
ESSENCI A
“Matched Pairs”
+10%
Upcharge of 10% with any order of a matching pair. This includes consecutive
numbers and Stocks matching in colour, figure and weight. Both guns are identically
balanced.
42
Essencia side-by-side “Big Five” double rifle standard configuration:
▶ Round-bodied steel receiver
▶ Fine English scroll engraving with gold
▶Sidelocks
accented inlays
▶ Color case-hardened finish
▶ Double barrel-hook lock-up
▶ Barrel length: 63.5 cm (25")
▶ Traditional style “Express” stock with
▶ Purdey-style third bite
cheekpiece and pistol grip
▶ Double trigger
▶ Wood category 003
▶ Traditional Tru-Oil finish
▶ Manual safety
▶ Automatic Holland & Holland style ejector
▶ Supplied in an exclusive leather hard case
Krieghoff Essencia
Sidelock “Big Five” double rifle
50.625,00 €
Essencia “Big Five” double rifle
AVA IL A B L E C A L IB R E S
Available in the following constrictions:
.450/.400 N.E., .500/.416 N.E., .470 N.E., .500 N.E.
A DDI T ION A L EQUIP MEN T
Nitrated surface finish
no extra charge
21.478,00 €
Interchangeable barrel with forearm
“Matched Pairs”
+10%
ESSENCI A
Upcharge of 10% with any order of a matching pair. This includes consecutive
numbers and Stocks matching in colour, figure and weight. Both guns are identically
balanced.
43
ENGR AV ING OP T IONS
The engraving patterns listed below are just a small sampling of the wood categories and engraving
combinations most frequently requested. In line with our philosophy of quality, all our engravings are
worked into the material of the action itself and never on attached plates.
The wood grade and surface finish of the metal parts can be chosen freely. Together with the engraving
patterns listed below, we just give you a recommendation of a certain wood grade in combination with a
specific metal part surface treatment, which compliments the appearance of the gun. The corresponding
extra cost for wood upgrades and metal part treatments, you will find under category “stocks & woodwork” and “surface finish”.
HUN T ING GUNS – ENGR AV ING OP T IONS
“Standard”
“Small arabesques”
Ornamental line engraving borders receiver.
Receiver nickel plated. Top lever, trigger guard, hinge
pin and forearm latch blued.
Hand engraved arabesque pattern on both sides.
Receiver nickel plated. Top lever, trigger guard, hinge
pin and forearm latch blued.
583,00 €
no extra charge
ENGR AV INGS
“Safari Scroll”
“Small game scene with leaf arabesques”
Full covering ornamental engraving.
Receiver nickel plated.
We recommend wood category 001.
Detailed game scene surrounded by leaf arabesque engraving. Motif for the game engraving each side can be
chosen freely. Receiver nickel plated. Top lever, trigger
guard, hinge pin and forearm latch blued.
We recommend wood category 001.
654,00 €
763,00 €
44
“Big Game”
“Small game scene with oak leaves”
Detailed game scene “African Game”. Motif for the
game engraving each side can be chosen freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Detailed game scene surrounded by oak leaf engraving.
Motif for the game engraving each side can be chosen
freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal part
1.196,00 €
1.267,00 €
“Large game scene with leaf arabesques”
“Large game scene with oak leaves”
Elaborate engraving featuring two animals surrounded by leaf arabesques, as well as an engraved trigger
guard. Scenes for the game engravings can be chosen
freely.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Elaborate engraving featuring two animals surrounded
by oak leaves, as well as an engraved trigger guard.
Scenes for the game engravings can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
3.057,00 €
“Full oak leaves”
“Fine English with roses & bouquet”
Luxurious, overall covering featuring deep engraved
oak leaves each side, as well as an engraved trigger
guard.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
Comprehensive overall covering featuring fine English
arabesques with rose & bouquet, as well as an engraved
trigger guard.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
3.057,00 €
4.562,00 €
45
ENGR AV INGS
1.680,00 €
HUN T ING GUNS – ENGR AV ING OP T IONS W I T H SIDE P L AT E S
The necessary side plates 1 for “S”-style engraving patterns are included in the price shown.
“Small English scroll”
“Small game scene with leaf arabesques”
Modest arabesque engraving per side, as well as on the
trigger guard.
We recommend wood category 002 combined with a
nickeled finish of all external metal parts.
Medallion of one deep engraved animal per side, surrounded by distinctive leaf arabesques in combination
with an engraved trigger guard. Scenes for the game
engravings each side can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
2.124,00 €
4.295,00 €
“Large game scene with leaf arabesques”
“Large game scene with English arabesques”
Elaborate engraving featuring three animals surrounded
by leaf arabesques each side, in combination with an
engraved trigger guard. Scenes for the game engravings
can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
Elaborate engraving featuring three animals surrounded
by English arabesques each side, in combination with an
engraved trigger guard. Scenes for the game engravings
can be chosen freely.
We recommend wood category 003 combined with a
nickeled finish of all external metal parts.
4.183,00 €
5.027,00 €
“Imperial”
“Large game scene with oak leaves”
ENGR AV INGS
Fine English arabesques in medallion-style, featuring
Krieghoff lettering as a banderole. We recommend wood
category 004 combined with nitrate receiver finish.
Elaborate engraving featuring three animals surrounded by oak leaves each side, in combination with an
engraved trigger guard. Scenes for the game engravings
5.390,00 € can be chosen freely.
We recommend wood category 004 combined with a
“Gold Imperial”
nickeled finish of all external metal parts.
Same design including golden Krieghoff lettering as a
6.465,00 €
banderole.
5.782,00 €
1
Steel receiver only
46
SEMP R IO – ENGR AV ING OP T IONS
Standard – black
Standard – nickel finish
Black anodized action finish without engraving.
We recommend standard wood category.
Nickel plated action finish without engraving.
We recommend standard wood category.
no extra charge
no extra charge
“Small arabesques”
“Large game scene with leaf arabesques”
Finely engraved arabesques on both sides combined
with a nickel finish.
We recommend wood category 001.
Elaborate engraving featuring two animals each side
surrounded by leaf arabesques, as well as an engraved
trigger guard. Motifs: red deer and wild boars.
224,00 € Nickel plated action finish.
We recommend wood category 002.
565,00 €
Interchangeable action frame
217,00 €
454,00 €
808,00 €
ENGR AV INGS
▶▶ Action frame in standard, featuring nickel plated or
black anodized action finish
▶▶ Action frame with “small arabesque” engraving,
combined with a nickel finish
▶▶ Action frame with “large game scene with leaf arabesques” engraving,
combined with a nickel finish
47
COMP E T I T ION SHO T GUNS – ENGR AV ING OP T IONS
Standard
“Vintage Scroll”
Light scroll engraving pattern. Nickel finish – top latch,
screws and pins are blued.
Modest ornamental engraving with nickel finish.
Optional finishes include nitride or blued.
131,00 €
no extra charge
„K-80 Logo“
“Vintage Game I”
K-80 logo along with border line on both sides, as well
as Krieghoff emblem and lettering on the underside of
the receiver.
We recommend wood category 001 combined with nickel finish.
Modest ornamental engraving featuring wildfowl scenes
with two motifs per side.
We recommend wood category 001 combined with nitrate receiver finish.
449,00 €
230,00 €
ENGR AV INGS
„Parcours“
“Celtic”
Completely covering curled ornaments.
We recommend wood category 001 combined with nickel finish.
Spacious Celtic ornament.
We recommend wood category 001 combined with
nickel finish.
812,00 €
48
873,00 €
„Vienna“
“Sovereign Scroll”
Completely covering, rich in contrast leaf ornaments.
We recommend wood category 002 combined with nickel finish.
Completely covering acanthus leaves.
We recommend wood category 002 combined with
nitrate receiver finish.
990,00 €
1.490,00 €
“Rausch Scroll”
“Gold Standard”
Wide curled leaf ornaments.
We recommend wood category 002 combined with
nickel finish.
Standard engraving with gold border line. Krieghoff
emblem and lettering on the underside of the receiver
inlaid in gold.
We recommend wood category 002 combined with blued
surface finish.
1.602,00 €
“K-80 Logo Silver”
“Parcours Special”
K-80 logo along with border line on both sides, as well as
Krieghoff emblem and lettering on the underside of the
receiver all inlaid in silver.
We recommend wood category 003 combined with blued
surface finish.
Relief engraving featuring wildfowl scenes. Three different styles of engraving patterns are available.
We recommend wood category 003 combined with nickel finish.
2.752,00 €
49
2.986,00 €
ENGR AV INGS
2.338,00 €
“Super Scroll”
“K-80 Logo Gold”
K-80 logo along with border line on both sides, as well
as Krieghoff emblem and lettering on the underside of
the receiver all inlaid in gold.
3.337,00 € We recommend wood category 003 combined with blued
surface finish.
Completely covering ornamental engraving.
We recommend wood category 003 combined with nickel finish.
3.653,00 €
“Uplander”
“Plantation”
Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock.
We recommend wood category 003 combined with
nitrate receiver finish.
Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon.
We recommend wood category 003 combined with
nitrate receiver finish.
3.758,00 €
3.758,00 €
“Plantation Scroll”
“Suhl Scroll”
ENGR AV INGS
Completely covering fine English arabesques.
We recommend wood category 003 combined with nickel finish.
Diamond-shaped ornamental engraving featuring leaf
arabesques.
We recommend wood category 003 combined with nick4.034,00 € el finish.
4.641,00 €
50
“Bavaria Royale”
“Gold Celtic”
Game scene with two motifs per side engraved in medallion-style, bordered by leaf arabesques.
We recommend wood category 004 combined with nickel finish.
Spacious Celtic ornamental engraving inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
5.406,00 €
5.435,00 €
“Gold Super Scroll”
“Victorian Scroll”
Completely covering ornamental engraving. Border line
as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold. Broken target in gold
on top latch.
We recommend wood category 004 combined with
nitrate receiver finish.
Fine English arabesques in shape of large scrolls.
We recommend wood category 004 combined with
nitrate receiver finish.
5.756,00 €
7.598,00 €
“Gold Uplander”
Completely covering engraving with fine English arabesques. Border line as well as Krieghoff emblem and
lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Completely covering fine English arabesques. Medallion-style game scene. Motifs: ruffed grouse and woodcock inlaid in gold. Border line as well as Krieghoff
emblem and lettering on the underside of the receiver
inlaid in gold.
5.929,00 € We recommend wood category 004 combined with nitrate receiver finish.
6.851,00 €
51
ENGR AV INGS
“Gold Plantation Scroll”
“Gold Plantation”
“Vintage Game II”
Completely covering fine English arabesques. Medallion-style game scene. Motifs: partridge and pigeon inlaid in gold. Border line as well as Krieghoff emblem and
lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Modest ornamental engraving featuring wildfowl
scenes. Two motifs per side inlaid in gold. Border line as
well as Krieghoff emblem and lettering on the underside
of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
6.851,00 €
7.697,00 €
“Heritage Scroll”
“Asprey Scroll”
Fine English arabesques with a modest banderole and a
gold border line. Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Completely covering large acanthus leaves.
We recommend wood category 004 combined with
nitrate receiver finish.
8.845,00 €
8.349,00 €
ENGR AV INGS
“Gold Victorian Scroll”
“Bavaria Suhl”
Fine English arabesques in shape of large scrolls. Border
line as well as Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Ornamental engraving with mystical faces. Medallion-style hunting scenes with three motifs per side.
We recommend wood category 004 combined with nitrate receiver finish.
10.198,00 €
8.993,00 €
52
“Bavaria Suhl Mystic”
“Gold Bavaria Royale”
Ornamental engraving with mystical faces.
We recommend wood category 004 combined with nitrate receiver finish.
Game scene with two animals inlaid in gold, engraved
in medallion-style and surrounded by leaf arabesques.
Border line as well as Krieghoff emblem and lettering on
10.198,00 € the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
11.259,00 €
“Highland Game I”
“Highland Game II”
Flowing thistle leaf ornamentals featuring wildfowl
scenes. Three motifs per side.
We recommend wood category 003 combined with
nitrate receiver finish.
Flowing floral ornamentals featuring wildfowl scenes.
Three motifs per side.
We recommend wood category 003 combined with
nitrate receiver finish.
10.130,00 €
“Waterfowl Medallion”
Full covering leaf arabesques with gold border line.
We recommend wood category 004 combined with nitrate receiver finish.
Completely covering acanthus leaves. Waterscape with
mallards and northern pintails engraved in medallion-style and surrounded by leaf arabesques.
10.247,00 € We recommend wood category 004 combined with nitrate receiver finish.
10.543,00 €
53
ENGR AV INGS
“Monarch”
10.130,00 €
“Renaissance”
“Gold Highland Game I”
Completely covering floral ornamentation, accented by
gold details. Gold inlaid lettering on the underside of the
receiver.
We recommend wood category 004 combined with nitrate receiver finish.
Flowing thistle leaf ornamentals featuring wildfowl
scenes, accented by gold details. Three motifs per side.
Border line as well as Krieghoff emblem and lettering on
the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
11.071,00 € nitrate receiver finish.
12.952,00 €
“Gold Highland Game II”
“San Remo”
Flowing floral ornamentals featuring wildfowl scenes,
accented by gold details. Three motifs per side. Border
line as well as Krieghoff emblem and lettering on the
underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
Wildfowl in flight or hunting scene featuring leaf arabesques.
We recommend wood category 004 combined with
nitrate receiver finish.
11.988,00 €
12.952,00 €
“Vintage Game III”
ENGR AV INGS
“Heritage Game I”
Modest ornamental engraving with gold accents and
wildfowl scenes. Three animals in gold per side.
Krieghoff emblem and lettering on the underside of the
receiver inlaid in gold.
We recommend wood category 004 combined with nitrate receiver finish.
Wildfowl surrounded by fine English Arabesques. Three
motifs per side. Border line as well as Krieghoff emblem
and lettering on the underside of the receiver inlaid in
gold.
We recommend wood category 003 combined with nitrate receiver finish.
12.827,00 €
12.344,00 €
54
“Crown Grade”
“Heritage Game II”
Wildfowl or hunting scenes, expressed in gold relief.
The medallion-style engraving is completely framed by
leaf arabesques. Two motifs per side. Border line as well
as Krieghoff emblem and lettering on the underside of
the receiver inlaid in gold. Golden crown on top lever.
We recommend wood category 004 combined with nitrate receiver finish.
Gold inlaid medallion of wildfowl scene, framed by fine
English arabesques. Three motifs per side. Border line
as well as Krieghoff emblem and lettering on the underside of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
18.630,00 €
19.424,00 €
“Gold Heritage Game”
Medallion of wildfowl scene, framed by fine English
arabesques. Three motifs per side in gold. Border line as
well as Krieghoff emblem and lettering on the underside
of the receiver inlaid in gold.
We recommend wood category 004 combined with
nitrate receiver finish.
A display of pictures, regarding further custom engravings, you will find under:
www.krieghoff.de/en/engravings.
55
ENGR AV INGS
22.680,00 €
C US T OM ENGR AV INGS
For years, engravers have artfully applied the finishing touch to guns, lending them a unique character
and an expression of their worth. Initial sketches, stemming from a dialogue with the gun owner, are
used to produce a harmonious design encompassing motif, style and material.
Krieghoff engravers have a comprehensive repertoire: from deep relief to the very finest Bulino style and
from classic hunting scenes to the multifaceted ornamentations of various eras. From precious metal inlays to surface finishing – there are no limits to their creative imagination.
Using their experience, finesse and talent, our engravers create fine works of art that reflect both the
passion and personality of the owner and the value and quality of an exquisite gun.
Our master engravers are able to realize virtually any special engraving requirement including the most
intricate custom engravings. For a proposal send us your request!
637,00 €
Price for plain, unengraved side plates 1
Engraving and wood upgrades are not included.
ENGR AV INGS
Custom Engraving I
Custom Engraving II
Deep engraved, full covering leaf arabesques with
ornamentic barrel base.
Relief-style engraved hunting scene, covered in oak and
thistle leaf with fine detailed elegant gold surrounding
line.
Custom Engraving III
Custom Engraving IV
Deep relief-style engraved wild boar scene with oak
leaves, surrounded by fine English arabesques.
Four different golds – yellow, white, green and red –
create the background for the Bulino style horses.
Accents applied in enamel.
A display of pictures, regarding further custom engravings, you will find under:
www.krieghoff.de/en/engravings.
1
Steel receiver only
56
VA R IOUS
SERV ICE
Fitting of choke tubes, altering fixed chokes into screw-in chokes for all brands:
We offer the installation of thin-walled Briley choke tubes into shotgun barrels, also for other brands.
Technical requirements will be checked carefully by our master gunsmiths before fitting. After the
fitting the gun has to be re-proofed by the Proofhouse.
▶▶ Fitting of chokes per barrel for over & unders or drillings 1
141,00 €
▶▶ Fitting of one choke into a single barrel shotgun 1
220,00 €
▶▶ Service charge for C. I. P. barrel proof
55,00 €
▶▶ Service charge for C. I. P. barrel proof (steel shot)
62,00 €
Flush mount Briley choke tubes for gauges 12, 16 and 20 1
96,00 €
Available in the following constrictions:
Cylinder (CYL), Skeet (SK), 1/4 (IC), 1/4–1/2 (LM), 1/2 (MOD), 3/4 (IMOD),
3/4–1/1 (LF), 1/1 (F) and Super-1/1 (XF)
Chokes accessories
▶▶
▶▶
▶▶
▶▶
▶▶
▶▶
Choke wrench
“Speed” wrench for quick choke changes (12 and 20 gauge)
Briley Special grease for chokes
Krieghoff Container for three chokes
Briley Container for five chokes
One inch extended, non-ported Briley choke tubes
36,00 €
120,00 €
31,00 €
19,00 €
21,00 €
price on request
575,00 €
Adjustable butt plate
for K-80 and KX-6, including fitting of the aluminium base plate
Periodical maintenance of your Krieghoff quality products ensures the
reliability and safety of your weapon to 100%, even after years of use.
505,00 €
Krieghoff Annual-Service K-80/-K-20
This service includes checking the gun for headspace, overcock, proper tolerances of
sears, ejectors and hammers and complete disassembly and replacement of springs
as needed throughout the receiver and forend iron. All parts are inspected for wear
and minor trigger and timing adjustments are made if needed. The gun is cleaned
and lubed. The barrel is tightened to the actions when possible. Replacement of broken or badly worn parts is available, at additional cost.
Position is not discountable.
57
VA R IOUS
1
GUN C A SE S
A display of pictures, regarding gun cases, can be found on page 60.
Exclusive leather case line in “Alba” leather-style
High-quality, brown leather gun case, made of precious “Alba” leather. The case
comes with a leather handle, and two securing leather straps. Additionally the corners of the case are reinforced with hand-stiched “Alba” leather patches for maximum durability. Two combination locks. The case interior is made of blue felt.
An individual custom-fit for the particular gun will be accomplished at the Krieghoff
factory. Price including modification services.
▶▶ F
or hunting guns, up to a barrel length of 63,5 cm (25"), including scope
Weight: ca. 4,7 kg
▶▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes
and one extra barrel
Weight: ca. 5,5 kg
▶▶ For over & under shotguns, up to a barrel length of 81 cm (32")
Weight: ca. 3,9 kg
1.418,00 €
1.594,00 €
1.418,00 €
Aluminum gun case
High quality aluminum gun case, with stylish panels bearing the Krieghoff logo on
the exterior, and bordeaux red interior lining with the Krieghoff logo embroidered.
Especially safe due to two key and one combination lock. With separate compartments
for scope, ammunition and accessories. An individual custom-fit for the particular gun
will be accomplished at the Krieghoff factory. Price including modification services.
▶▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including scope
Weight: ca. 6,7 kg
▶▶ For hunting guns, up to a barrel length of 63,5 cm (25"), including two scopes
and one extra barrel
Weight: ca. 7,4 kg
▶▶ For over & under shotguns, up to a barrel length of 86 cm (34")
Weight: ca. 6,4 kg
▶▶ For over & under shotguns, up to a barrel length of 81 cm, with adjustable rib
(K-80 ProSporter, K-80 ProTrap, K-80 Trap Special) Gewicht: ca. 6,2 kg
▶▶ For over & under shotguns, up to a barrel length of 86 cm (34"), including one
extra barrel
Weight: ca. 8,0 kg
919,00 €
1.056,00 €
919,00 €
1.239,00 €
1.056,00 €
Krieghoff GunPack
This hard-top gun case is made out of black, shock resistant “ABS” plastic material
assembled by ultrasonic welding and the addition of “ABS” at the fluid state.
A Krieghoff lettering in gold is on the upper left of the outer front and inner top part.
The inside is made out of velvet-like, blue cloth. It is pre-formed to exactly fit your
hunting gun, a scope, and accessories or ammunition. Four hook-and-loop fasteners
additionally secure the content. Four “push” catches avoid unwanted opening.
Krieghoff GunPack for Hunting Guns
▶▶ Barrel length: max. 74 cm (29")
▶▶ Weight: ca. 2,6 kg
52,00 €
Krieghoff GunPack for Semprio ▶▶ Barrel length: max. 79 cm (31")
▶▶ Weight: ca. 2,6 kg
52,00 €
Krieghoff gun case – premium edition
VA R IOUS
A high class hard-top gun case is made out of shock resistant “ABS” plastic material
assembled by ultrasonic welding and the addition of “ABS” at the fluid state. Brown
leather application trims the edges and Krieghoff is printed in gold on the front.
The inner is made of velvet-like cloth. The bottom part is pre-formed and offers
space for the receiver-stock-unit, securable by hook-and-loop fastener, as well as
accessories. The upper part is pre-formed for two barrels. The divider pad can be
attached to the upper part with two hook-and-loop fasteners securing barrels and extras. Your gun is safe from unauthorised access with three - independently settable
- combination locks.
58
Krieghoff gun case for hunting guns – premium edition
Suitable for all Krieghoff huntings guns (except for the Krieghoff Ultra)
including one scope.
▶▶ Color: green/blue
▶▶ Barrel length: max. 87 cm (34")
▶▶ Weight: ca. 2,8 kg
292,00 €
Krieghoff gun case for Semprio – premium edition
Including two scopes and one extra barrel
▶▶ Color: green/blue
▶▶ Barrel length: max. 87 cm (34")
▶▶ Weight: ca. 4,2 kg
329,00 €
Krieghoff gun case for K-80 – premium edition
▶▶ Color: blue/red
▶▶ Barrel length: max. 87 cm (34")
▶▶ Weight: ca. 3,4 kg
305,00 €
Krieghoff gun case for K-80 Combo– premium edition
Including one extra barrel and accessories
▶▶ Colour: blue/red
▶▶ Barrel length: max 87 cm (34”)
▶▶ Weight: ca. 4,6 kg
342,00 €
Krieghoff barrel case
▶▶ For one barrel set max length 91 cm
105,00 €
SHO O T ING V E S T S
A display of pictures, regarding shooting vests, can be found on page 58.
Krieghoff “London” shooting vest – left and right-handed
180,00 €
Krieghoff “Performence” shooting vest – left and right-handed
180,00 €
VA R IOUS
Krieghoff neoprene gun strap
The elastic neoprene material allows for highest wearing comfort and offers optimal
protection against the strap sliding off the shoulder. With Krieghoff emblem embossed.
▶▶ Standard version
▶▶ Exclusive version – with leather top
50,00 €
66,00 €
Gun care
▶▶ “Gun Glide”, gun grease, 50 g tube
▶▶ Special grease for chokes
16,00 €
31,00 €
59
VA R IOUS
Additional accessories like hats, shirts, books, DVDs etc.
you will find under: www.krieghoff.de/shop
A P P ENDI X
Alba leather case
Aluminium gun case
Krieghoff Gun Case for K-80 – Premium Edition
Krieghoff gun case – premium edition
Krieghoff barrel case
Krieghoff see through sight for hunting guns
Barrel porting for Semprio
Fluted barrel for Semprio
VA R IOUS
60
Krieghoff see through sight for Semprio
Muzzle threading with and without individually
adapted thread cover bushing
Semprio Pro Mount
Factory chokes (black) ,optional titanium chokes
(polished) and optional titanium chokes in gold
Barrel porting for K-80
Krieghoff Balance System – barrel weights
Krieghoff Balance System – stock weights
61
VA R IOUS
“Compact” version with additional sling swivels
on the side of forend and buttstock
Krieghoff HiViz Pro Shotgun Sight
Custom made stock with ergonomic grip and finger
grooves as well as an adjustable butt plate
Length of pull adjustment
Monogram in gold on the trigger guard
Inlet into pistol grip cap with custom engraving
Steel pistol grip cap with custom engraving
Broken target in gold on top latch.
“Imperial design” – extended steel trigger guard
VA R IOUS
62
Shooting Vest Trap “London” leather, navy
Shooting Vest Sporting “London” navy
Shooting Vest Sporting “London” gold
63
MEMO
Shooting Vest Skeet “Performance” royal blue
MEMO
I.
Scope mounts
Scope mounts, carried out at the Krieghoff factory, will include sighting-in. On guns with more than one
barrel we guarantee a certain grouping of the barrels will be obtained. If scope mounts are fitted elsewhere
an extra charge will be applied for sighting-in of the gun. Further, we cannot give any warranty for common
point of impact accuracy on guns with multiple barrels. If the installation of the scope mount was not carried out by us we are not able to take any responsibility for the performance of grouping.
Because of physical reasons, the point of impact (grouping of the barrels) on guns featuring multiple barrels
can only be adjusted for one type of sight (rather open sight or scope). If nothing else was requested by the
customer and the scope mount was done at the Krieghoff factory, we always sight-in guns featuring multiple
barrels over the scope. If several scopes are being mounted, explicit information is required for which scope
the grouping performance need to be obtained. If no information is being supplied, we will use the largest
scope to ensure grouping accuracy.The points mentioned above are also valid for insert barrels.
II.
Model thermo stable
If thermo stable models are ordered with cosmetic side ribs, we strongly recommended, for technical and
aesthetic reasons, that the scope mounting and sighting-in process is carried out at the Krieghoff factory.
III.
Guarantee
If scope installation is carried out by anyone other than Krieghoff and the barrels require subsequent reblueing, all warranty regarding blueing and shooting accuracy will be void.
IV.
Shooting accuracy
The accuracy of the gun can only be guaranteed if the same type of ammunition is used as the gun was
sighted-in with. Therefore we recommend to acquire a sufficient stock of ammunition of the same loading
used to sight-in your gun, especially if the gun has multiple rifled barrels. This applies to rifle cartridges as
to shot gun slugs.
In big bore double rifles semi jacketed bullets and full metal jacketed bullets are often being used side by
side. Although this might be very useful, accuracy can only be guaranteed with one type of ammunition
load. Test shots with a second load or even finding two loads that work together are only done on special
request and have an additional time and ammunition charge.
V.
Weight
All specified weights, especially the total weights of weapons are to be understood as approximate information. Due to manufacturing and construction-related factors, as well as varying weights stem from the
natural material of wood, there may be deviations. The weight data therefore only serves as a benchmark
for better differentiation.
VA R IOUS
64
65
VA R IOUS
NOTES
H. Krieghoff GmbH ∙ Hunting and Sporting Arms
Boschstrasse 22 ∙ 89079 Ulm ∙ Germany
Phone: +49 (0) 7 31 / 4 01 82-0 ∙ Fax: +49 (0) 7 31 / 4 01 82-800
[email protected] ∙ www.krieghoff.de