760C STAND ALONE COPY BOX P/N: 13337 - MA

Transcription

760C STAND ALONE COPY BOX P/N: 13337 - MA
760C STAND ALONE COPY BOX
P/N: 13337
Installation & User’s Guide
Q-TEC 760C STAND ALONE COPY BOX
Please read this manual before operating the device
WARNING!
CD-BACKUP IS ONLY USED FOR BACKUP
AND EDITING PERSONAL DATA. THE BACKUP
DISK MADE FROM CD-BACKUP THAT LICENCE
IS BELONGED TO THE AUTHOR OR COMPANY
LICENCED. ANY UNAUTHORIZED COPYING,
EDITING OR SALING IS STRICTLY PROHIBITED.
WE DISCOURAGE OUR CUSTOMERS TO DO SO
AND ANY SUCH ACTION GIVE RISE TO
CRIMINAL PROSECUTION.
WE WOULD NOT BE RESPONSIBLE FOR
THE ILLEGAL ACTION OF THE USER.
Catalogue
1. Parts of the package
2. Installation
3. Exterior layout
4. Main features
5. Operating instruction
5.1 Copy Disc
5.2 Test Copy Disc
5.3 Raw Copy Disc
5.4 Quick Erase Disc
5.5 Full Erase Disc
5.6 Update BIOS
1
2
8
9
12
13
13
13
14
14
14
1 Parts of the package
Visually check the package before open. If there is any physical damage,
please contact your local dealer.
A complete unit contains as following items:
No.
1
2
3
4
5
6
Description
External Box
User Manual
IDE flat cable
CD-Backup Controller
Power cord
Screws
1
Quantity
1
1
1
1
1
1
2
3
4
5
6
1
2 Installation
2.1 To loose the three screws from the back panel and remove the top cover of
external case.
Screw
2.2 Remove the label of pad.
label
2
2.3 Set CD-ROM and CD-R/RW to “Master” position.
(Please refer to your CD-ROM/R/RW drive’s user manual)
Master
2.4 Place CD-R/RW drive into lower drive bay of external case and Screw up
the device.
3
2.5 Connect IDE flat cable and 4-pin DC power wire to CD-R/RW.
IDE cable
4-pin DC
power wire
2.6 Place CD-ROM drive into upper drive bay of external case and Screw up
the device.
4
2.7 Connect 4-pin DC power wire and install the CD-Backup Controller to
CD-ROM.
CD-Backup
Controller
4-pin DC
power wire
2.8 Connect IDE flat cable of CD-R/RW drive to CD-Backup Controller.
Connect 4-pin DC power wire to CD-Backup Controller.
4-pin DC
power wire
IDE cable
5
2.9 Connect switch wire and 3 LED wires to “JP4” connector of CD-Backup
Controller.
Black
Red
Black
Brown
Black
Green
switch
wire
6
2.10 Fix the top cover back with screws.
Plug power cord into backside’s
power connector.
Power cord
7
3 Exterior layout
1
2
3
5
4
6
7
1. CD-ROM
2. CD-R/RW
3. State LED
4. Power LED
8
5. Function Switch
6. Power Switch
7. AC INLET
4 Main features
CD-Backup specifications are as following:
4.1 Easy to Operate
You can start to backup your CD by applying household power.
4.2 Support RAW Mode Copy
CD-Backup provides a flawless function for backup all format of compact
disks, even than protected ones, with excellent accuracy.
4.3 Disk Format
Support all kinds of disk format, including CD-ROM (Model & Mode2),
CD-ROM/XA (Mode2 form1 & form2), CD-DA, Mixed-Mode, Video CD,
CD-I, Karaoke CD, Photo CD (Single & Multi-session), CD-Extra, HFS,
CD-Bridge, ISO9660, CD-R, and CD-RW.
4.4 Power Design
AC 110V/220V auto switching.
4.5 Intelligent Detect
The CD-Backup will detect the format of source CD and automatically
choose the best way to duplicate CD. You don ’ t need any further
computer knowledge.
4.6 CD-ROM Spec.
Support any IDE CD-ROM drive.
4.7 CD-R/RW Spec.
Support any IDE CD-RW drive.
9
☆
10
Actuality Tested CD-RW List
Brand
Model
Speed
(R/RW/Read)
AOpen
AOpen
AOpen
AOpen
AOpen
ASUS
ASUS
CyberDrive
IMATION
LG
LITEON
LITEON
LITEON
LITEON
LITEON
LITEON
MITSUMI
NEC
NEC
Nichimen
Plextor
Plextor
Plextor
Philips
CRW1232A
CRW1632
CRW2440
CRW3248
CRW4048
CRW-1610A
CRW-3212A
CW-038D
CRD-BP1400PT
GCE-8320B
LTR-12101B
LTR-1610B
LTR-24102B
LTR-32123S
LTR-40125S
LTR-48125W
CR-48XATE
NR-7700A
NR-7800A
CRD-BP1500PIT
PX-W8432Ti
PX-W1210TA
PX-W1610TA
CDD4401
12/10/32
16/10/32
24/10/40
32/12/48
40/12/48
16/10/40
32/12/40
16/12/40
16/10/40
32/10/40
12/10/32
16/10/40
24/10/40
32/12/40
40/12/48
48/12/48
32/10/40
12/10/32
16/10/40
24/10/40
8/4/32
12/10/32
16/10/40
4/4/24
☆
Support Support
RAW
Max
mode
Speed
Yes
12x
Yes
16x
Yes
24x
Yes
32x
Yes
40x
Yes
16x
Yes
32x
Yes
16x
Yes
16x
Yes
32x
Yes
12x
Yes
16x
Yes
24x
Yes
32x
Yes
40x
Yes
48x
Yes
32x
Yes
12x
Yes
16x
Yes
24x
Yes
8x
Yes
12x
Yes
16x
Yes
4x
☆
Actuality Tested CD-RW List
Brand
Model
Speed
(R/RW/Read)
Philips
Philips
Panasonic
Panasonic
RICOH
RICOH
SONY
SONY
SONY
TDK
TDK
TEAC
TEAC
TEAC
TEAC
Traxdata
Traxdata
Traxdata
YAMAHA
YAMAHA
YAMAHA
CDD4801
CDD4851
CW-7585-B
CW-7586
MP7080A
MP7125A
CRX140E
CRX145E
CRX160E
CRD-BP1300PT
CRD-BP1400PT
CD-W512EB
CD-W516E
CD-W524E
CD-W540E
CDRW-1610E
CDRW-2410E
CDRW-3212E
CRW8424E
CRW2100E
CRW2200
8/4/32
12/8/32
8/4/32
8/4/32
8/4/32
12/10/32
8/4/32
10/4/32
12/8/32
12/10/32
16/10/40
12/10/32
16/10/40
24/10/40
40/12/48
16/10/40
24/10/40
32/12/48
8/4/24
16/10/40
20/10/40
☆
Support Support
RAW
Max
mode
Speed
Yes
8x
Yes
12x
No
8x
No
8x
Yes
8x
Yes
12x
Yes
8x
Yes
10x
Yes
12x
No
12x
Yes
16x
Yes
12x
Yes
16x
Yes
24x
Yes
40x
Yes
16x
Yes
24x
Yes
32x
No
8x
No
16x
No
20x
11
5 Operating instruction
LED display for selection function:
LED display
Function
Green
Power On & Duplication Error Code
Amber
Copy Disc & Quick Erase Disc
Red
Amber & Red
Test Copy Disc
Raw Copy Disc & Full Erase Disc
The users can push ʺFunction Switchʺ on the front panel to change each
function.
Duplication Error Code List:
Flashing Times
2
3
12
Massage
Not an empty disc in the CD-RW writer.
Source disc capacity is larger than target
disc.
4
Source disc quality is bad.
5
Target disc quality is bad.
8
Old BIOS disc or wrong disc.
All main functions are described as followed:
5.1 Copy Disc
We strongly recommend you to choose this function to make a CD-to-CD
duplication. With this function, it can backup exactly the same CD as the
source disk, with excellent accuracy.
5.2 Test Copy Disc
To simulate the copying process of CD-Backup, you may execute this [Test
Copy Disc] function. This function is almost the same as [Copy Disc].
However, data will not be actually written to an empty disk; its primary
function is to estimate the feasibility of writing data to the empty disk. In
fact, CD-Backup can duplicate any CD except those have serious scratches
on it.
5.3 Raw Copy Disc
With this function, it can duplicate exactly the same CD as the source disk,
even the protected ones, with excellent accuracy. In order to use this
function, you must use CR-852E/854E/856E CD-ROM drive. Maximum
copy speed is 4X.
The trays of CD-ROM and CD-R/RW writer should be pushed out
manually. Put the master CD into CD-ROM and the blank CD-R/RW disc into
CD-R/RW writer. Close the trays. When both devices detect the master CD and
CD-R/RW disc, the duplication will start automatically.
While the duplication, the LEDs of users selected mode keep flashing. If
users would like to stop the duplication, just power off the external case.
When duplication is completed, the LEDs of users selected mode will stop
flashing. The CD-R/RW disc will be ejected automatically. The users should
take out the CDs and put in new CD-R/RW disc. The duplication will start
again.
If duplication fails, the LEDs of users selected mode will stop flashing and
the power LED will be flashing several times continuously. The master CD or
CD-R/RW disc will be ejected automatically. The users should take out the CDs
and put in new master CD or CD-R/RW disc. The duplication will start again.
13
5.4 Quick Erase Disc
It’s a kind of method to quick erase file head. It just likes Blank, but not
real. Relative to Full Erase, it can reduce half process time. The function is
used for CD-RW discs only.
5.5 Full Erase Disc
Complete Erase. It will erase all data on the CD. The function is used for
CD-RW discs only.
When the CD-ROM drive is empty. The users can put used CD-RW disc
into CD-R/RW writer, then CD-R/RW writer will automatically erase CD-RW
disc.
While the erase CD-RW disc, the LEDs of users selected mode keep
flashing. When erase CD-RW disc is completed, the LEDs of users selected
mode will stop flashing. The CD-RW disc will be ejected automatically. The
users should take out the CDs and put in used CD-RW disc. The erase CD-RW
disc will start again.
5.6 Update BIOS
We can support NEW UPDATE DISC for update CD-Backup’s F/W. It can
add new function or fix bug.
The users can put NEW UPDATE DISC into CD-ROM drive, then hold
ʺFunction Switchʺ for three seconds. When CD-Backup detects the latest BIOS
version in the BIOS disc, it will automatically update the old BIOS to a new
one.
DO NOT press
power button, otherwise CD-Backup will not boot up again.
While the update BIOS, all LEDs keep flashing.
After updating new BIOS, system will reboot.
14
DECLARATION OF CONFORMITY
We, the manufacturer / importer
Q-TEC
Daltonstraat 65
3316 GD Dordrecht
The Netherlands
Declare that the product
Kind of product : Accessory
Type designation : Q-TEC 760C STAND ALONE COPYBOX
Is herewith confirmed to comply with the requirements set in the Council
Directive on the Approximation of the Laws of the Member States relating to
Electro Magnetic Compatibility Directive (89/336/EEC)
Low Voltage Directive
(73/23/EEC)
Manufacturer/Authorized representative
Q-TEC
Ing. E.M.J. van Zomeren
Dordrecht, August 19, 2002