February 2015 - Marcon International, Inc.
Transcription
February 2015 - Marcon International, Inc.
Marcon International, Inc. P.O. Box 1170, 9 NW Front Street, Suite 201 Coupeville, WA 98239 U.S.A. Telephone (360) 678 8880 Fax (360) 678-8890 E Mail: [email protected] http://www.marcon.com Vessels and Barges for Sale or Charter Worldwide February 2015 Inland Pushboat Market Report Following is a breakdown of pushboats Marcon has available for sale worldwide. Most of these are typical U.S. inland river units, although there are a few foreign pushboats listed from Europe, Latin America and Southeast Asia. Horsepower Ranges Jun 1996 Apr 1997 Jan 1998 Jan 1999 Jan 2000 Jan 2001 Feb 2002 Feb 2003 Feb 2004 Feb 2005 Feb 2006 Feb 2007 Feb 2008 Feb 2009 Feb 2010 Feb 2011 Feb 2012 Feb 2013 May 2013 Aug 2013 Nov 2013 Feb 2014 May 2014 Aug 2014 Nov 2014 Feb 2015 – Worldwide Feb 2015 – U.S. Feb 2015 – Foreign Avg. Age - Worldwide Avg. Age – U.S. Avg. Age – Foreign For Charter - Worldwide For Charter – U.S. For Charter - Foreign Under 1,000 75 60 66 58 73 61 48 57 39 33 26 22 20 17 33 37 31 31 29 27 32 31 30 28 27 25 22 3 1979 1979 1978 7 6 1 1,000 – 2,000 19 16 22 18 25 33 11 30 22 13 5 5 17 14 25 26 19 28 25 30 29 28 27 28 24 24 20 4 1973 1972 1982 11 8 3 Up Since Last Report 2,000 – 3,000 5 4 6 4 6 4 3 4 6 9 7 6 7 6 13 8 6 18 16 16 16 13 13 15 10 12 8 4 1972 1969 1977 6 2 4 3,000 – 4,000 10 12 12 8 7 7 3 14 7 7 4 4 5 4 10 6 4 8 10 9 9 6 7 7 7 6 5 1 1971 1966 1993 0 0 0 4,000 – 5,000 7 3 2 3 3 3 0 2 1 2 1 1 5 5 6 3 1 7 8 10 9 5 5 5 6 6 4 2 1966 1958 1997 0 0 0 5,000 – 6,000 6,000 – 7,000 5 2 2 0 1 0 0 0 0 0 0 0 0 0 0 0 4 4 3 3 3 1 1 2 2 2 1 1 1974 1966 1981 Over 7,000 7 0 0 1 1 2 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Total 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 4 4 0 0 0 0 0 0 0 0 0 128 97 110 92 116 110 65 107 75 64 43 38 54 46 87 80 69 101 96 96 99 85 83 85 76 75 60 15 0 0 0 24 16 8 0 0 0 0 0 0 Down Since Last Report Not included though in the list are those vessels, which are not officially on the market, but could be developed on a private and confidential basis. Market Overview Of the 12,947 vessels (excluding barges) Marcon currently tracks, 689 are inland river pushboats with 75 officially on the market for sale (60 U.S. flag and 15 foreign flag). Nine of the boats with age listed were built within the last ten years. 36 boats are fortyfive years of age or older. The oldest listed is a 1,500HP, 80 footer built in 1939 (photo right), but rebuilt and repowered many times since and still going strong. The youngest boat available for sale is a 600HP, 26 footer built in 2013. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. Marcon International, Inc. Inland Push Boat Market Report – February 2015 Breakdown by Built & BHP Built 1939 1950 1951 1952 1953 1955 1956 1957 1958 1959 1960 1961 1963 1964 1965 1966 1967 1968 1969 1970 1972 1975 1976 1978 1979 1980 1981 1982 1983 1986 1991 1993 1997 1998 2002 2005 2007 2008 2013 Unknown Total <1000 1000-1999 1 2000-2999 3000-3999 4000-4999 5000-5999 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 3 1 1 25 1 2 1 1 2 24 1 12 6 1 6 2 Total 1 1 1 2 1 1 1 3 5 1 2 1 2 1 1 4 2 2 3 1 3 3 1 1 1 4 2 1 2 2 1 1 1 1 1 5 2 1 1 5 75 Of the vessels listed for sale, CAT engines are most popular with machinery in 21 vessels. These are followed by Cummins in 15, General Motor / Detroit Diesels in 13, EMDs in seven, and eight with other engine types ranging from Alco to Volvo. Naturally, most of the inland river pushboats Marcon has listed for sale are located in the U.S. with 60 vessels or 80%; followed by 10 or 14% in Europe, two in Africa and one each in Canada, the Caribbean and the Mediterranean. Actual sale prices of all vessels and barges sold by Marcon so far in 2015 have averaged 91.15% of asking prices, compared to 2014’s 85.65%. Average asking prices and price indications have remained steady since our last report. There remain few good listings as many owners are enjoying good utilization and hanging onto their equipment. The market outlook is stable. There are always a few vessels though unofficially on the market which might be developed on a private & confidential basis, so buyers should contact Marcon with specific requirements. Marcon also currently has 24 inland river pushboats listed for charter - eight foreign and 16 in the U.S. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 2 Marcon International, Inc. Inland Push Boat Market Report – February 2015 Marcon’s Market Comments 2015 is off to a good start for the inland river market. The inland tank barge market is somewhat soft given crude prices hovering around $50/BBL with no clear direction. The growth over the last few years in inland crude transport will likely decline, but by how much remains to be seen. Given the strong market and high rates in 2014, 2015 will have a tough time beating last year’s results. The sale and purchase market for pushboats and river barges remains stable. Prices asked even for older tonnage remain fairly high. It remains a good time to market medium to older age barges and pushboats to take advantage of the current market in the US. Marcon’s Recent Sales The first two months of 2015 saw six sales and one charter concluded, including one pushboat. Riverview Equipment, LLC of Petaluma, California has sold its inland pusher tug "Cassie Lind" to private interests for re-powering and refurbishment to be further employed in the new Owner’s inland service. The ex"Anna Foss", ex-"American River" was originally built by Colberg Boat Works of Stockton, California in 1961 and measures 65’ length overall x 26’ beam x 8’ depth of hull. The vessel is a combination pusher / towing vessel which is designed with a model bow, flat bottom, and straight sides. She was designed for towing and pushing with push knees forward and a three level deck house which allows for a good height of eye in the pushing mode. She is also fitted with a Nautican fixed kort nozzle system, installed by a former Owner in 2012, with 64” x 62” wheels, and triple rudders for excellent focus of thrust, and good maneuverability in tight quarters. Previously powered with twin CAT main engines totaling 1,700BHP, she was sold as a straight hull without any machinery, and towed to her new home by her new Owner for refitting / refurbishment. Marcon acted as sole broker in the sale and has handled a number of sales and purchases for both Buyer and Seller in the past. Marcon has sold or chartered 35 inland river pushboats totaling 79,460BHP, 111 inland hopper barges, 76 inland deck barges totaling 135,822dwt capacity and 63 inland tank barges with an aggregate capacity of 1,030,848 barrels in addition to over a thousand other vessels and barges worldwide. A full list of Marcon sales for 2015 and past years can be found on our website at www.marcon.com under Sales Reports. Grain Transportation Report U.S. Agricultural Exports: The Effects of the 2014-15 West Coast Port Disruptions The health of the U.S. farm economy depends on exports. USDA’s February 19 Outlook for U.S. Agricultural Trade highlights an astonishing trend for American farm exports that began in 2009. U.S. agricultural exports have climbed 47% in value, from $96.3 billion in fiscal year 2009 to the most-recent forecast of $141.5 billion in FY 2015. Overall, those exports would be expected to support more than 1 million American jobs. In calendar year 2014, 71% of U.S. agricultural exports by volume (149 million metric tons) and 71% of imports by volume (44 million metric tons) were waterborne. Containerized waterborne U.S. agricultural exports moving through the West Coast ports accounted for about 61% of the volume cited above, and containerized waterborne U.S. agricultural imports accounted for 25%. Thus, the West Coast container ports serve as a critical gateway for trade with Asia and the rest of the world for U.S. agriculture and many other industries. The efficient operation of these ports is critical to many agricultural exports, including highvalued perishable products. However, in 2014 the operations of these ports were disrupted due to prolonged labor negotiations. The delays significantly affected agricultural exports. In this article, we analyze data from the Port Import Export Reporting Service (PIERS) to see how agricultural exports changed in 2014 compared to the three-year average from 2011 through 2013. In the 4 years from 2011 to 2014, containerized agricultural exports moving through the West Coast ports averaged 22 million metric tons, valued at over $35 billion dollars per year (see table). www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 3 Marcon International, Inc. Inland Push Boat Market Report – February 2015 During this period, animal feed and soybeans accounted for 39% of containerized agricultural exports moving through the West Coast ports. The top 10 of containerized agricultural exports, which accounted for 56% by volume of total agricultural exports moving through these ports, also included high-value products such as meat, vegetables, oranges, and other fruit, dairy products, nuts, hides and skins, raw cotton, and grocery items. On February 20, after 9 months of negotiations that began on May 12, 2014, the Pacific Maritime Association (PMA), representing the ocean carriers and terminal operating companies, and the International Longshore and Warehouse Union (ILWU), representing the labor needed for efficient container operations, announced a tentative agreement on a new 5-year contract covering workers at all West Coast container ports. Details of the terms are not yet publicly available. The next step is for the Union to ratify the contract, which could take a few months to complete. While the union is going through the ratification process, port operations have returned to normal and the backlogs that resulted from the dispute are being worked down. Because the labor contract for the West Coast container ports expired on July 1, 2014, but a tentative agreement was not reached until February 20, 2015, the normal labor-management disagreements on port operations could not be resolved via dock arbitration, as is normally the case under contract terms. This resulted in significant congestion at ports and movements of imports and exports through the West Coast container ports were significantly disrupted. That included containers of agricultural commodities for export, as well as soybeans, animal feed, and grain products that are shipped from the Midwest and transloaded from covered hopper cars; and meat and poultry that are transloaded from refrigerated box cars into containers at the port. Containerized agricultural exports through these ports decreased significantly during the last 4 months of 2014, the last available data. Bulk grain continued to move without disruption during this time, because the grain elevators operate under a separate contract between the Pacific Northwest Grain Handlers Association and ILWU that was ratified on August 26, 2014. The waterborne commerce data, as reported by PIERS, show that in the second half of 2014, containerized agricultural exports moving through the West Coast ports were lower than the previous 3-year average, especially during September through December. The containerized agricultural exports moving through the affected ports were reduced by 32 to 44% of the 3-year average in terms of value, and between 16 and 20% in terms of quantity, during the last 4 months of 2014 (see figures 1 and 2). By the end of October, dock congestion issues began to worsen and port terminals, trucking companies, and railroads that serve the ports were periodically unable to accept additional export cargo. Exporters and importers were forced to pay demurrage and detention charges for the containers and rail cars. Import and export cargo was diverted to other ports in the U.S. East and Gulf coasts, Mexico, and Canada. Western intermodal rail traffic showed weekly decreases into 2015, while it increased on all other major railroads. Some cargo destined for export was stored or diverted to the domestic market, lowering prices. Currently, the vessel backlog continues to gradually decrease. Some shippers estimate it could take another 2 to 3 months to return to normal operations, while others say perhaps as long as 6 months. It will likely vary by port, commodity, and company. USDA’s AMS has no estimates of the amount of time it will take for the backlogs to be completely cleared. The immediate economic impacts of the port slowdown include: short-term loss of market share for U.S. producers; disruption of the agricultural supply chain for such products as animal feed, soybeans, meat, cotton, vegetables, and fruit; increased transportation and storage costs; and loss of some perishable products. Some market analysts have indicated it is possible the West Coast ports could suffer some longer-term market share losses to non-U.S. agricultural products. In addition, long-term market share losses for West Coast container ports may remain if some U.S. exporters continue to rely on new supply chain arrangements with other ports in Canada, Mexico, or the U.S. Gulf and East coasts. The diverse businesses that represent U.S. agriculture depend on a strong and efficient multimodal transportation system to maintain the competitive position U.S. food products have gained in international trade. The West Coast ports must continue to operate efficiently and reliably for those businesses to remain strong and competitive. [email protected], [email protected] www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 4 Marcon International, Inc. Inland Push Boat Market Report – February 2015 Waterborne Commerce Statistics Center Monthly Tonnage – Internal U.S. Waters Under U.S. law, vessel operators must report domestic waterborne commercial movements to the U.S. Army Corps of Engineers. February’s 44.0 million short tons of commodities carried on internal U.S. Waterways was down 14.89% from November’s 51.7 million tons and was higher than February 2014’s tonnage of 32.5 million tons. February 2015 is the highest February movement since the 43.8 million recorded in February 1998. A new model was introduced recently resulting in the separation of petroleum and chemical indicators. In February, 13.4 million tons of petroleum were carried, down 6.94% from November’s 14.4 million but up 4.69% from February 2014’s 12.8 million tons. Chemicals moved in February were 3.8 million, less by 11.63% than November’s 4.3 million and higher 5.56% than February 2014’s 3.6 million tons. 11.0 million tons of Coal & Coke were hauled, 11.29% lower than November’s 12.4 million tons and .90% lower than February 2014’s 11.1 million tons. 6.60 million tons of Farm and Food Products shipments were higher than November’s 8.3 million tons and significantly higher than February 2014’s 1.87 million tons. The Freight Transportation Services Index (TSI), which is based on the amount of freight carried by the for-hire transportation industry, fell 0.2% in January from December, declining for the second consecutive month, according to the U.S. Department of Transportation’s Bureau of Transportation Statistics’ (BTS) Freight Transportation Services Index (TSI) released March 11th. The January 2015 index level (122.9) was 29.9% above the April 2009 low during the most recent recession. The level of freight shipments in January measured by the Freight TSI (122.9) was 0.6% below the all-time high level of 123.6 in November 2014. The November and December indexes were revised down from last month’s release. November was revised from 123.9 to 123.6 while December was revised from 123.8 to 123.1. There were smaller downward revisions for August through October. The Freight TSI measures the month-tomonth changes in freight shipments by mode of transportation in tons and ton-miles, which are combined into one index. The index measures the output of the for-hire freight transportation industry and consists of data from for-hire trucking, rail, inland waterways, pipelines and air freight. Rail carloads, rail intermodal, and pipeline grew in January but air freight, trucking and waterborne decreased, resulting in the continuing decline in the overall freight index. Institute for Supply Management data indicated that growth in production, orders, and inventory slowed in January. The Freight TSI declined in January for the second consecutive month. It was down 0.6% from its all-time high in November after increases for five consecutive months. Even after two months of declines, the index remained higher than it had been at any point prior to the November high. After dipping to 94.6 in April 2009, the index rose 29.9% in the succeeding 69 months. Freight shipments in January 2015 (122.9) were 29.9% higher than the recent low in April 2009 during the recession (94.6). The January 2015 level was 0.6% below the historic peak reached in November 2014 (123.6). Freight shipments measured by the index were down 0.2% in January compared to the end of 2014. Freight shipments are up 19.0% in the five years from the post-recession level of January 2010 and are up 7.6% in the 10 years from January 2005. January 2015 freight shipments were up 5.6% from January 2014. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 5 Marcon International, Inc. Inland Push Boat Market Report – February 2015 According to the Lake Carriers’ Association, with the vast ice fields of December 2013 a distant but still troubling memory, U.S.-flag cargo movement on the Great Lakes this past December rebounded significantly. Shipments totaled 9.6 million tons, an increase of nearly 35% compared to a year ago. Every commodity – iron ore, coal, limestone, cement, salt, sand and grain, registered increases ranging from 10 to 209%. “The increases recorded this past December dramatically illustrate just how badly the early onset of ice in December 2013 slowed Great Lakes shipping,” said James H.I. Weakley, President of Lake Carriers’ Association. “This is why we have begun our effort to build another heavy icebreaker to partner with the U.S. Coast Guard’s ‘Mackinaw’. It would be foolhardy to imagine we won’t face daunting ice fields again. In fact, shipping has slowed considerably in January as a result of thick ice in Whitefish Bay, the upper St. Marys River, and more recently, the St. Clair River.” For the year, U.S.-flag lakers carried 90.1 million tons of cargo, an increase of 1.1% over 2013. Iron ore cargos increased 4% to 46.5 million tons. Coal loadings dipped 2.6% and limestone shipments slipped 3%. Cement cargos rose by 3.7%. Salt’s 39-percent surge reflects that many communities exhausted their supplies battling the winter of 2013/2014. Sand cargos were essentially unchanged from 2013, but grain cargos decreased by 42%. Weakley noted two factors helped the fleet carry slightly more cargo than in 2013: Higher water levels and the activation of three ships not scheduled to operate in 2014. Still, Weakley cautioned that neither option is guaranteed going forward. “Water levels fluctuate. The next decline could start sooner than anyone expects. And there are no more idle vessels that can be put into service quickly. The vessels that did not sail in 2014 require varying amounts of work before being commissioned. The best guarantee that the delays of December 2013 remain a painful memory is twinning the ‘Mackinaw’ and assigning another 140-foot-long icebreaking tug to the Lakes. We also urge Canada to reassess its icebreaking resources stationed on the Lakes.” Lake Carriers’ Association represents 17 American companies that operate 56 U.S.-flag vessels on the Great Lakes that carry the raw materials that drive the nation’s economy: iron ore and fluxstone for the steel industry, aggregate and cement for the construction industry, coal for power generation, as well as salt, sand and grain. Collectively, these vessels can transport more than 115 million tons of cargo per year. Bunker Prices Worldwide With the exception of Fujairah, all areas tracked reported a sharp increase in prices in February, proving that rebounds happen as we have all seen repeatedly. Fujairah, historically less volatile than other areas reported, decreased 6.93% to February’s average US$ 772.50/mt from January’s average US$ 830.00/mt. This is the lowest monthly average for Fujairah since December 2010. In the U.S., Houston increased 8.37% to US$ 647.50/mt from US$ 597.50/mt. Rotterdam increased 17.40% to US$ 550.00/mt from US$ 468.50/mt and Singapore rose 12.21% to US$ 560.50/mt from US$ 499.50/mt. In the United States, Kirby Corporation’s average 247 towboats operating with their 884 inland tank barges on inland waterways of the U.S. average cost per gallon for fuel consumed during fourth quarter 2014 was US$ 2.83 per U.S. gallon compared to US$ 3.10/gallon for third quarter 2014 and US$ 3.26/gallon during the comparable fourth quarter of 2013. During that period of time their inland tank barge utilization remained in the 90 – 95% range. Pricing on renewing contracts experienced only modest increases and were under pressure late in the fourth quarter. In addition, high winds and heavy fog during the quarter drove a year over year increase in delay days in the Gulf Intracoastal Waterway. Operating conditions throughout the Mississippi River system were seasonally normal. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 6 Marcon International, Inc. Inland Push Boat Market Report – February 2015 The end of January saw a modest increase in fuel prices on the West Coast. February saw a 25-27% increase in prices, which many believe was in reaction to ExxonMobil’s Torrance, California refinery outage after an th explosion and fire on February 18 . OPIS contract average weekly prices of th ultra-low sulphur diesel for the week ending 27 February compared to the th week ending 30 January increased in all areas reported, starting with Seattle’s increase of 25.55% to US$ 2.16 per U.S. gallon from US$ 1.72/gal. Fuel in Portland, Oregon was at US$ 2.19/gal (US$ 1.76/gal), a 24.02% increase. Diesel in San Francisco rose 27.09% to US$ 2.29/gal from the US$ 1.80/gal average paid the end of January and Los Angeles / Long Beach / El Segundo increased 25.62% to US$ 2.16/gal from US$ 1.72/gal over the same time period. In the week ending March 6th, fuel prices dipped in all areas when the week’s averages ranged from a low of US$ 2.13/gal in Los Angeles / Long Beach / El Segundo to a high of US$ 2.26 in San Francisco. According to the Paris-based, International Energy Agency’s “Oil Market Report”, crude oil prices stabilised following early-February gains, with ICE Brent rising more than NYMEX WTI which was weighed down by swelling US stockpiles. At the time of writing, Brent was trading at around $58/bbl - up nearly 30% from a six-year low in January. WTI was at around $48/bbl. Having bottomed-out in 2Q14, global oil demand growth has since steadily risen, with year-on-year gains estimated at around 0.9 mb/d for 4Q14 and 1.0 mb/d for 1Q15. The forecast of demand growth for 2015 as a whole has been raised by 75 kb/d to 1.0 mb/d, bringing global demand to an average 93.5 mb/d. Global supply rose by 1.3 mb/d year-on-year to an estimated 94 mb/d in February, led by a 1.4 mb/d gain in non-OPEC. Declines in the US rig count have yet to dent North American output growth. Final December and preliminary 1Q15 data show higher-than-expected US crude supply, raising the 2015 North American outlook. OPEC crude output edged down by 90 kb/d in February to 30.22 mb/d, as losses in Libya and Iraq offset higher supply from Saudi Arabia, Iran and Angola. A slightly higher demand forecast has raised the 2H15 'call' on OPEC crude to 30.3 mb/d, above the group's official 30 mb/d target. Global crude refinery throughputs estimates have been raised to 77.8 mb/d for 1Q15 and 77.3 mb/d for 2Q15, on sustained high margins and a slightly more robust oil demand outlook. Annual gains are forecast around 1.0 mb/d in 1H15, down from a sharp 2.2 mb/d in 4Q14, and in line with projected oil product demand growth. OECD commercial stocks rose by a weaker-than-average 23.1 mb in January, to 2 733 mb, trimming their surplus to average levels to 60.3 mb. US crude stocks rose to a record 72 mb surplus. Preliminary data show stocks drew by a weak 8.8 mb in February as extended US crude builds offset steep weather-related product draws. Per the latest U.S. Energy Information Administration’s “Short-Term Energy Outlook”, North Sea Brent crude oil spot prices increased by $10/bbl from January to reach an average of $58/bbl in February, the first month in which Brent prices increased since June 2014. Several factors supported Brent prices in February, including news of falling U.S. crude oil rig counts and announced reductions in capital expenditures by major oil companies, both of which contributed to expectations that oil supplies could decline more quickly than previous market expectations. Additionally, lower-than-expected Iraqi crude oil exports and a reduction in Libyan production contributed to an increase in global unplanned supply disruptions. However, sustainability of the recent price increase is very uncertain, as it occurred amid strong global oil inventory growth, which is expected to continue in coming months. Inventory builds are projected to moderate later in the year and provide support to crude oil prices. The monthly average WTI crude oil spot price increased to an average of $51/bbl in February, up $3/bbl from January. WTI prices increased less than Brent prices in February as U.S. commercial crude oil inventories increased to 444 million barrels as of February 27, an increase of over 50 million barrels since the end of 2014. The record inventory levels have put downward pressure on the price of crude oil for prompt delivery relative to the price of crude oil for delivery in the future. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 7 Marcon International, Inc. Inland Push Boat Market Report – February 2015 Shipyard News & Newbuildings Some great rivers, like the Amazon and the Columbia, empty into swift ocean currents so their sediment load is swept away. Others, like the Nile and the Mississippi, empty into enclosed waters like the Mediterranean or Gulf of Mexico. Their sediment load settles rapidly to form many square miles of delta and shallow waters. Each estuary develops its own types of vessels. On the section of the Gulf Coast where the Mississippi meets the Gulf, shallow draft Lugger tugs have been earning their keep suppling the near shore oil industry. But their size has been limited by their draft which is, of course subject to the prop size as much as the hull depth. Over the years innovative tug designers and operators have found that three smaller engines, turning smaller props can deliver as much power with significantly less draft than a twin-prop boat with bigger engines. An additional advantage of triple-screw is that, in the event of loss of power from one engine, the operator can still rely on two engines for maneuvering and safety. Triple-screw shallow-draft boats come in a variety of forms including pushboats and model bow tugs. Although he builds vessels of those classes, Joseph Rodriguez of Rodriguez Shipbuilding is perhaps best known for his in-house designed Lugger-type tugs. Their aft mounted deckhouse provides a convenient foreword deck space for cargo. A single drum aft mounted towing winch allows towing or, with blocks, the boat can be rigged as a pusher. Rodriguez recently delivered the “Captain Nedo C”. The vessel is a triple-engine Lugger powered by three Cummins QSK19-M engines each producing 660HP at 1,800RPM. The 70’ by 29’ tug has a molded depth of 9.5’ and is equipped with a M50 Pullmaster stern towing winch. Even though the tug has a hefty 1,980HP, when light loaded with fuel and water, she only draws 6.5 feet. Even with full capacities or 17,000 US gallons of fuel and 26,000 US gallons of water she is able to access most of the necessary sites along the shallow estuary of the Mississippi River. Article courtesy of Cummins Hotips#754 February 2015. Photo courtesy of Rodriguez Shipbuilding. Long talked about and occasionally experimented with, the Z-drive is rapidly gaining acceptance on America’s inland waterways. While a number of operators have recently built boats powered by a pair of Cummins 1,000HP K38 M engines and Z-drives, Main Iron Works is building a series of four boats with three Cummins 750HP QSK19-M engines coupled to well-mount ZF WM5000 drives. This combination gives the boats a similar, but slightly higher, 2,250HP with greater flexibility for rebuild and maintenance of EPA tier requirements. The engines are set on the main deck level of the 11-foot molded depth hull, to give the boat an operating draft of ten feet which includes the onefoot plate keel that helps protect the Z-drives in conjunction with the stump jumpers. Four of the 79.5’ by 34’ boats, “Jock Cenac”, “Eugenie Cenac”, “Jack G. Cenac”, and “Loretta G Cenac” have been delivered. Acceptance of new approaches can be slow on the inland waterways, but the Z-drive is rapidly gaining prominence as a means of propulsion in the 2,000-HP class of pushboat. Article courtesy of Cummins Hotips#752 January 2015. Photo by Jeff L. Yates. Master Marine, Inc. of Bayou La Batre, AL continues to build for Marquette Transportation Gulf Inland Division with the delivery of their third 2,000HP Zdrive river coastal pushboat. The vessel measures 78’ x 34’ x 11’ depth and has GRT of 195 and NRT 156. The vessel was named “Dennis Fromenthal” for Marquette’s Director of Engineering. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 8 Marcon International, Inc. Inland Push Boat Market Report – February 2015 Per MarineLog’s January 20, 2015 listing of contracts at U.S.shipyards, there were 22 push boats on order, down six from the 28 on order when we last reported this figure in our August 2014 report. There is an order for eight 30’ boats for the U.S. Navy reportedly being built at Metalcraft Marine in Kingston, Ontario, Canada. Vessel Type Customer Name Description Delivery A&B Industries, Amelia LA Towboat CLM Towing Capt. Thomas Paul 2014 Eastern Shipbuilding, Panama City FL Towboat Florida Marine Ty Dolese 90 ft 2014 Towboat Florida Marine Bill Seymour 90 ft 2015 Towboat Florida Marine 90 ft 2015 Towboat Florida Marine 90 ft 2015 155-ft. 2013 2,000 hp 15-Apr Gulf Island, Houma LA Towboat Hunter Marine Main Iron Works, Houma LA Towboat Chem Carriers Marine Builders, Utica IN Towboat Golding BL Sam Golding 2,000 hp 2014 Towboat Golding BL Alice Golding 2,000 hp 2014 Towboat Golding BL 2,000 hp 2014 Master Marine, Bayou La Batre AL Towboat Marquette Transportation 2,000 hp 14-Jul Towboat Marquette Transportation 2,000 hp 14-Sep Towboat Magnolia Marine Kathy Azlin 3,000 hp 14-Jun Towboat Magnolia Marine Margaret Ann 3,000 hp 14-Dec Towboat JANTRAN 4,000 hp 14-Dec Towboat Magnolia Marine 3,000 hp 2015 Nichols Boats, Greenville MS Deborah Miles Raymond Assoc, Bayou La Batre AL Towboat SCF Marine SCF Mariner 2,400 hp 2014 Towboat SCF Marine SCF Vision 2,400 hp 2014 Towboat SCF Marine SCF Safety Leader 2,400 hp 2014 Towboat SCF Marine SCF Safety Endeavor 2,400 hp 2014 Vigor Fab, Portland OR Towboat Tidewater Barge Line 4,500 hp 14-Dec Towboat Tidewater Barge Line 4,500 hp 2015 Towboat Tidewater Barge Line 4,500 hp 2015 nd Following is a list of pushboats and towboats delivered from U.S. shipyards per Colton Co. as of March 2 in 2015. So far in 2015, five pushboats and towboats have been delivered, whereas 2014 saw the delivery of 101 boats. O.N. 1255184 1256311 1258033 1257590 1258562 2015 Deliveries of Pushboats / Towboats Sorted by Owner/Operator Name Builder Owner/Operator Type of Vessel Genie Cenac Intracoastal Iron Works Cenac Marine 2,000-hp Towboat Elizabeth M. Robinson John Bludworth SY Genesis Marine 2,600-hp Towboat Michelle Golding Sneed Shipbuilding Golding Barge Line 2,600-hp Towboat Kate Golding Marine Builders Golding Barge Line 2,600-hp Towboat Texian Hope Services Maryland Marine 2,000-hp Towboat www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. GT 98 372 299 160 177 Date 11-Feb-15 20-Jan-15 12-Feb-15 10-Feb-15 12-Feb-15 9 Marcon International, Inc. Inland Push Boat Market Report – February 2015 Featured Listings For Sale Direct from Owners File: TP42132 Push Boat: 132.0' loa x 30.0' beam x 10.8' depth. Built in 1952 by Nashville Bridge, TN. Rebuilt: 2012. U.S. flag. GRT: 369. Main Engines: 2 x CAT 3516BT Tier I total 4,000BHP. Last Overhauled: 2008. 2 - FP prop(s). Kort nozzle(s). Fresh overhaul. Genset(s): 2 - 99kW (new 2006). Air Conditioned. Galley. Steel hull push boat. Repowered / renovated 2006 and 2012. Good condition. U.S. Coast Guard sticker expires 2015. Keen Seller and inviting offers. Contact Marcon for price guidance. U.S. Gulf Coast. File: TP27100 Push Boat: 100.0' loa x 30.0' beam x 8.4' depth. Built in 1958 by Superior Boat Works; Greenville. Rebuilt: 2006. U.S. flag. GRT: 292. FO: 34,954g. FW: 18,000g. Main Engines: 2 x EMD 12-645C total 2,400BHP. Last Overhauled: 2006. 2 70" x 63" 4-blade/ea prop(s). PME = 19,832hrs; SME = 19,832hrs. Genset(s): 2 100kW / Detroit. Quarters: 8 berths. Air Conditioned. Shallow draft, twin screw pushboat. Two steering and four flanking rudders. Height of eye = 30'. Replaced wheels, rudders, bushings, shafts in July of 2006 at docking. U.S. Coast Guard sticker exp. 2015. U.S. Gulf Coast. File: TP24130 Push Boat: 131.1' loa x 30.8' beam x 10.7' depth x 7.00' draft. Built in 1958 by Verret Shipyard; Plaquemine, LA. Rebuilt: 1991. U.S. flag. GRT: 494. FO: 42,000g. FW: 3,300g. Main Engines: 2 x EMD 12-645CE2 total 2,600BHP. Last Overhauled: 1/91. 90" - 89" prop(s). All main & generator engines o'hauled 1/91. Spares. Genset(s): 2 - 99kW John Deere. Two steering & two flanking rudders. Hull blasted & painted 1/91. New hull bottoms & Fernstrum coolers 1/92. Prefers to sell out of US registry. U.S. Gulf Coast. File: TP18088 Push Boat: 85.0' loa x 28.0' beam x 10.3' depth x 7.00' light draft x 9.00' loaded draft. Built in 1964 by Southern Shipbuilding. U.S. flag. GRT: 196. FO: 32,000g. FW: 4,000g. Winch: 2 - 40T Nabrico push + 10HP bow capstan; 15HP stern capstan. Main Engines: 2 x CAT D398 total 1,700BHP. 76" x 72" 4-blade S/S prop(s). PME - Rebuilt 2007, now 5,268hrs; SME - runs but high hours. Genset(s): 2 - 60kW / GM6-71. Quarters: 6 berths (5 staterooms). AirCon. Galley. Eye level 34'. Two steering / two flanking rudders. Reportedly in good overall condition. Keel coolers. Working boat but can be developed for sale. Electrical fire January 2012. All new switch gear, motor starters and wiring up to deck level 3. Generators pulled, dipped & baked. New marine sanitation system and both gensets removed & renewed. Cost in excess of USD 300K. U.S. East Coast. File: TP17028 Push Boat: 90.0' loa x 28.5' beam x 10.5' depth x 9.00' loaded draft. Built in 1968 by Jeffboat; Jeffersonville, IN. U.S. flag. GRT: 218. Class: Originally built to ABS Loadline requirements. FO: 28,000g. FW: 19T. BW: 6T. Winch: Smatco 44-DTS-75 face winches. Main Engines: 2 x CAT D398 total 1,800BHP. 2 - 75" x 56" SS 4 - BLD prop(s). 2 main and 2 flanking rudders. Abt 4,000hrs on each main. Genset(s): 2 - 99kW John Deere. Quarters: 7 in 4 cabins. Air Conditioned. Galley. Coastal type towboat semi V-shaped bottom with flanking rudders. Five deck boat with 46' height of eye. Works 2-300' barges. Prefers to sell out of US registry. U.S. Gulf Coast. File: TP15080 Push Boat: 81.0' loa x 23.0' beam x 7.0' depth x 7.00' loaded draft. Built in 1939 by Steel Const.Co.; Portland, OR. U.S. flag. GRT: 133. FO: 11,500g. FW: 1,000g. Winch: 2 - Beebee (fwd/aft). Main Engines: 2 x CAT 3508T total 1,500BHP. 2 - 4-blade SS prop(s) on 5" x 290 1/2" shaft(s). Bollard Pull: 12.75T. Genset(s): 2 - 40kW / GM 4-71 208v 3ph. Quarters: 6 Crew. Steel hull, aluminum house construction. Height of eye is 40'. U.S. West Coast. File: TP14089 Push Boat: 80.0' loa x 26.0' beam x 9.1' depth. Built in 1957 by Bludworth, Inc.; Houston, TX. Rebuilt: 2013. U.S. flag. GRT: 162. Main Engines: 2 x Cummins total 2,000BHP. Repowered 2013 with New ME/Gens/Gears. U.S. Midwest. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 10 Marcon International, Inc. Inland Push Boat Market Report – February 2015 File: TP13077 Push Boat: 76.0' loa x 23.0' beam x 7.0' depth x 7.20' loaded draft. Built in 1970 by Hudson Marine; Seward, AK. U.S. flag. GRT: 121. FO: 25,000g. FW: 5,000g. Winch: 2 - 25T Beebe aft. Wire Capacity: 950'/800', 1-1/8". Main Engines: 2 x Cummins QSK19-M total 1,320BHP. 2 - FP 3 blade 60" x 44" prop(s) on 4.5" x 18.75' shaft(s). Genset(s): 2 - 50kW / John Deere 220/110vAC. Air Conditioned. Galley. Mast height 59.5'. Two Gearmatic bow winches. Upper pilot house. Contact Marcon for price ideas. U.S. Northwest. File: TP06054 Push Boat: 50.0' loa x 28.0' beam x 6.0' depth. U.S. flag. Hull & cabin only. 4 shafts. U.S. Gulf Coast. File: TP06053 Push Boat: 50.0' loa x 18.0' beam x 6.2' depth. Built in 1966 by Grazzafi Marine Repair; Morgan City. U.S. flag. GRT: 52. Main Engines: 2 x GM 8V71 total 600BHP. 16' highest fixed point. U.S. Gulf Coast. File: TP06051 Push Boat: 50.0' loa x 18.0' beam x 6.0' depth x 3.90' light draft x 5.00' loaded draft. Built in 1963 by Intercoastal S/Y; Morgan City, LA. Rebuilt: 1982. U.S. flag. GRT: 52. Main Engines: 2 x GM 8V71 total 600BHP. Repowered 1982. 28' highest fixed point. U.S. Gulf Coast. File: TP06050 Push Boat: 50.5' loa x 20.0' beam x 7.7' depth x 6.00' draft. Built in 1981 by U.S. Steel S/Y; Morgan City, LA. U.S. flag. GRT: 80. Main Engines: 2 x GM 8V71 total 600BHP. 11' highest fixed point. U.S. Gulf Coast. File: TP06049 Push Boat: 48.0' loa x 16.0' beam x 6.0' depth. U.S. flag. total 400BHPU.S. Gulf Coast. File: TP04043 Push Boat: 43.0' loa x 16.1' beam x 6.0' depth. Built in 1964 by Gaston Ayo; Morgan City, LA. U.S. flag. GRT: 36. Main Engines: 2 x GM 6-71 total 400BHP. For sale out of the US Gulf. U.S. Gulf Coast. File: TP03054 Push Boat: 54.0' loa x 24.0' beam x 4.5' depth. Built in 1971 by Missouri DD & Repair;Cape Girardeau. U.S. flag. GRT: 56. Main Engine: 1 x CAT D353 total 300BHP. Single screw towboat. U.S. Gulf Coast. File: TP03039 Push Boat: 39.0' loa x 18.0' beam x 3.1' depth. Built in 1968 by Sidney Solar, Jr. U.S. flag. GRT: 27. total 300BHP. U.S. Gulf Coast. File: TP02051 Push Boat: 50.0' loa x 17.9' beam x 4.7' depth. Built in 1953 by Siracusa's Shipyard; LA. U.S. flag. GRT: 42. FO: 800g. FW: 400g. Winch: 5T BR deck. Main Engine: 1 x GM 6-71 total 165BHP. on 3" shaft(s)Pump(s): Diesel fuel & water transfer. Genset(s): 1 - 20kW / GM2-71 220vAC. Firefighting: Barnes fire & bilge pump. Quarters: 2 crew. Open deck. 18' eye level. No electronics. Lugger style pushboat with two story house aft and push knees forward. Perko 8" spotlight. U.S. Gulf Coast. See our website at www.marcon.com for the most recent inland river pushboat and barge listings. Call if you do not see what you are looking for. Many other boats are listed on a non-published basis. We are interested in receiving information on any vessels surplus to your requirements that may be available for sale or charter on either a published or private and confidential basis. We are also interested in receiving press releases, news and comments about the industry on a regular basis for our market reports. www.marcon.com Details believed correct, not guaranteed. Offered subject to availability. 11
Similar documents
Pushboat Market Report - Marcon International, Inc.
Marcon International, Inc. Inland Push Boat Market Report – February 2011 The Missouri Department of Transportation reports that cargo has returned to the Missouri River with expectations for the ...
More information