Mini Lampholders.qxd

Transcription

*Mini Lampholders:Mini Lampholders.qxd 23/02/09 4:21 PM Page 1
SECTION F
MINIATURE
LAMPHOLDERS
1850 Wilson Avenue, Toronto,
Ontario, Canada, M9M 1A1
Ph: 416-741-7336 Fax: 416-741-9104
# E163296 Vol - 1
F1
# 029592
# E163296 Vol - 2
Lamp Type
Max Voltage
Shell
Bracket
Termination
Page
02-00
02-00-1
03-00
04-00
06-00
06-00-1
07-00
07-00-1
07-00J
10-00
10-00-1
11-200
12-200
22-00
23-00
23-00-1
23-200
23-200-1
27-00
27-200
27VC-00
27VC-200
Miniature Bayonet
Miniature Bayonet
Miniature Bayonet
Candelabra Screw
Candelabra Screw
Candelabra Screw
Miniature Bayonet
Miniature Bayonet
Miniature Bayonet
Candelabra Bayonet, Single Contact
Candelabra Bayonet, Double Contact
Candelabra Bayonet, Halogen
T3 1/4 Wedge Base
T3 1/4 Wedge Base
T3 1/4 Wedge Base
T3 1/4 Wedge Base
G4 Two Pin, Halogen
G4 Two Pin, Halogen
G4 Two Pin, Halogen
G4 Two Pin, Halogen
Threaded Bushing Sockets
Plug Button Sockets
Automotive
Reflectolite Series
125V
12V
125V
125V
125V
125V
125V
12V
125V
125V
12V
12V
125V
125V
28V
28V
28V
28V
14V
14V
14V
14V
-
Steel
Steel
Brass
Brass
Brass
Brass
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Steel
Plastic
Plastic
Plastic
Plastic
Ceramic
Ceramic
Plastic
Plastic
-
Insulated
Grounded
Insulated
Insulated
Insulated
Grounded
Insulated
Grounded
Insulated
Insulated
Grounded
Grounded
Grounded
Grounded
Insulated
Grounded
Insulated
Insulated
Insulated
Insulated
Insulated
Insulated
-
2 Wire Leads
1 Wire Lead
2 Wire Leads
2 Wire Leads
2 Solder Lugs
1 Solder Lug
2 Solder Lugs
1 Solder Lug
2 Solder Lugs
2 Solder Lugs
1 Solder Lug
1 Wire Lead
2 Wire Leads
2 Wire Leads
2 Solder Lugs
1 Solder Lug
2 Wire Leads
1 Wire Lead
2 Male Tabs
2 Wire Leads
2 Male Tabs
2 Wire Leads
-
F3
F3
F4
F5
F6
F6
F7
F7
F7
F8
F8
F9
F9
F10
F11
F11
F11
F11
F13
F13
F13
F13
F14
F14
F14
F15
A-96
Electrical Devices Incorporated reserves the right to discontinue, modify designs and change specifications without incurring obligation.
While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct,
no warranty is given in respect thereof and the company shall not be liable for any error herein.
Copyright © 2009 Electrical Devices Inc
MINIATURE LAMPHOLDERS
Lampholder
Miniature
Lampholders
F2
MINIATURE LAMPHOLDER OVERVIEW
Electrical Devices Inc. Miniature Lampholder Selection Guide
Lamp Type
Lamp
Style
Lamp
Base
Voltage
Range
Lampholder
Series
Shell
Bracket
Termination
Page
No.
Mini Lampholders
Incandescent Series
6-28V
53-00
53-200
Nylon
Nylon
insulated
insulated
2 solder lugs
2 wire leads
F14
F14
1.35- 28V
16-00
16-00
16-200
16-200-1
23-00
23-00-1
23-200
23-200-1
Brass
Brass
Brass
Brass
Plastic
Plastic
Plastic
Plastic
insulated
grounded
insulated
grounded
insulated
grounded
insulated
grounded
2 solder lugs
1 solder lug
2 wire leads
1 wire lead
2 solder lugs
1 solder lug
2 wire leads
1 wire lead
F10
F10
F10
F10
F13
F13
F13
F13
1.25-125V
02-00
02-00-1
03-00
07-00
07-00-1
17-00
Steel
Steel
Brass
Steel
Steel
Steel
insulated
grounded
insulated
insulated
grounded
insulated
2 wire leads
1 wire lead
2 wire leads
2 solder lugs
1 solder lug
2 wire leads
F4
F4
F3
F7
F7
F4
1.75-48V
05-00
05-00-1
Brass
Brass
insulated
grounded
2 solder lugs
1 solder lug
F6
F6
2.4-125V
12-200
Steel
grounded
2 wire leads
F9
4-125V
10-00
10-00-1
11-200
Steel
Steel
Steel
insulated
grounded
grounded
2 solder lugs
1 solder lug
1 wire lead
F8
F8
F9
4-125V
04-00
06-00
06-00-1
19-00
Brass
Brass
Brass
Plastic
insulated
insulated
grounded
insulated
2 wire leads
2 solder lugs
1 solder lug
2 wire leads
F5
F6
F6
F8
125
55-00
Plastic
insulated
2 solder lugs
CALL
SALES
DEPT.
5-14V
5-14V
5-14V
5-14V
6-12V
27-00
27-200
27VC-00
27VC-200
21-00
21-200
Ceramic
Ceramic
Plastic
Plastic
Ceramic
Ceramic
insulated
insulated
insulated
insulated
insulated
insulated
2 male tabs
2 wire leads
2 male tabs
2 wire leads
2 male tabs
2 wire leads
F15
F15
F15
F15
F11
F11
30-125V
22-00
Steel
grounded
2 wire leads
F12
5-14V
38-00
38-200
Ceramic
Ceramic
insulated
insulated
2 male tabs
2 wire leads
F11
F11
wire leads,
male tabs or
solder lugs
F18
T 1ﬂ wedge base
Midget screw
6.3-28V
T 3 ⁄ wedge base
Miniature bayonet
Miniature Screw
Candelabra bayonet
Double contact
Candelabra bayonet
Single contact
Candelabra screw
Intermediate screw
Halogen Series
G4 two pin
T 2⁄ wedge base
Candelabra bayonet
Double contact
G6.35 two pin
Reflectolite Series - Lampholder and reflector assemblies for most series of sockets
Par 18-2 1/8” dia.
Most Series
Par 22-2 7/8” dia.
of
Plated steel
Par 36-4 7/16” dia.
Lampholders
Par 56-5.6” dia.
Available
grounded
or
insulated
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
MINIATURE BAYONET BASE
02-00
MINIATURE BAYONET LAMPHOLDERS
steel shell insulated, 2 wire leads
SERIES
75W 125V
02-00-1
02-00-1 SERIES
27/64
3/8
15/16
37/64
3/4
for miniature bayonet incandescent lamps, plated steel shell.
for series 02 wire leads are AWM-1007/TR64-90º C, .015” insulation.
Other wire types and terminations are available upon request.
standard leads are 22AWG black & white, 6” long; stripped 1/2”.
if you require wire lead length different than the standard 6” length, add it to the end of the
part number (in inches) preceded by hyphen.
• bracket is insulated from the shell on series 2-00 & 17-00
• mounting brackets are made from .03”T x .44”W steel, zinc plated; unless otherwise specified
• all mounting holes are .17”DIA & slots are .17”W x .86”L, unless otherwise specified
• these brackets and others which are not shown, can be interchanged
with series shown on this page.
•
•
•
•
•
TO ORDER: use the number of the bracket type desired to replace the zeros in the series number.
For example, bracket 08 would be specified in each series as follows: 02-08, 02-08-1.
FOR REVERSE SPECIFY -04
-03
-11
-12
-30N
MOUNTING HOLE: 5/8” DIA.
-01
-08
-06
-13
-20
-40
ALL OF THE ABOVE BRACKETS AND MANY OTHERS ARE AVAILABLE ON ANY OF THE ABOVE SERIES. NOTE:J SLOT ORIENTATION IS RANDOM UNLESS OTHERWISE SPECIFIED.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
25W 12V
33/64
T-3 1/4
steel shell grounded, 1 wire lead
ground wire available upon request
SERIES
02-00 SERIES
F3
Miniature
Lampholders
03-00
MINIATURE BAYONET BASE LAMPHOLDERS
insulated mounting bracket, 2 wire leads.
SERIES
Mini Lampholders
75W 125V
• for miniature bayonet base incandescent lamps.
• high strength molded plastic outer housing with brass shell.
• wire leads are AWM-1015/TEW-105º C, .03” insulation.
other wire types and terminations are available upon request.
• standard leads are 22AWG black & white, 6” long; stripped 1/2”.
• if you require wire lead length different than the standard 6” length, add it
to the end of the part number (in inches) preceded by hyphen.
• bracket is insulated from the shell.
• mounting brackets are made of .03”T x .50”W steel zinc plated;
unless otherwise specified.
• all mounting holes are .17” DIA & slots are .17”W x .86”L,
• these brackets and others which are not shown, can be interchanged with
the series shown on this page.
03-07
For example, bracket 13 would be specified in each series as follows: 03-13.
-03
-05
-45
-06
-08
-11
-19
-20
-37
-13
-12
-46
SPECIFY -55 FOR RIGHT HAND CLIP
F4
-65
ALL OF THE ABOVE BRACKETS AND MANY OTHERS ARE AVAILABLE ON ANY OF THE ABOVE SERIES.
NOTE: J SLOT ORIENTATION IS RANDOM, UNLESS OTHERWISE SPECIFIED.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
04-00 SERIES
75W 125V
F5
CANDELABRA SCREW BASE LAMPHOLDERS
insulated mounting bracket, 2 wire leads,
heavy duty molded housing.
For example, bracket 08 would be specified as : 04-08
ø 21/32
-01
-05
-08
-11
SPECIFY -55 FOR RIGHT HAND CLIP
-20
-65
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
04-00
• for candelabra screw base incandescent lamps.
• high strength molded plastic outer housing with brass screw shell.
• wire leads are AWM-1015/TEW-105º C, .03” insulation. Other wire types
and terminations are available upon request.
• standard leads are 18AWG black & white, 6” long; stripped 1/2”.
• if you require wire lead length different than the standard 6” length, add it to the end of the
• bracket is insulated from the shell.
• mounting brackets are made from .03”T x .50”W steel, zinc plated;
• all mounting holes are .17” DIA & slots are .17”W x .86”L, unless otherwise specified.
Miniature
Lampholders
75W 125V
06-00 SERIES
06-00-1 SERIES
CANDELABRA SCREW BASE LAMPHOLDERS
insulated mounting bracket, 2 solder lugs.
grounded mounting bracket, 1 solder lug.
• shell is brass.
• all terminals are tinned steel for easy soldering of wire connections.
• terminals are placed approximately 60 to 90 degrees apart, they can be
positioned to your specific requirements upon request.
• mounting brackets are made from .03”T x 44”W steel, zinc plated;
• all mounting holes are .17”DIA & slots are .17”W x .86”L, unless otherwise specified.
with the series shown on this page.
6-07
-01
-13
-03
For example, bracket 08 would be specified in each series as follows: 05-08, 05-08-1, 06-08, 06-08-1
Mini Lampholders
F6
MINIATURE SCREW BASE
CANDELABRA SCREW BASE
-06
-08
05-35
-87
-20
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
07-00
MINIATURE BAYONET BASE LAMPHOLDERS
SERIES
75W 125V
07-00J
SERIES
25W 12V
SERIES
75W 125V
13/32
1/2” high shell instead of 3/4”.
Remember to reduce overall height from drawings by 1/4”
1/2
for miniature bayonet incandescent lamps.
socket body is steel zinc plated .
all terminals are tinned steel for easy soldering of wire connections.
terminals are placed approximately 60 to 90 degrees apart, they
can be positioned to your specific requirements upon request.
• mounting brackets are made from .03”T x .44”W steel, zinc plated; unless otherwise specified.
• all mounting holes are .17”DIA & slots are .17”W x .86” L, unless otherwise specified.
• these brackets and others which are not shown, can be interchanged with these series.
•
•
•
•
07-59
For example, bracket 11 would be specified in each series as follows: 07-11, 07-11-1, 07-11J, 07-11J-1.
-01
-05
-08
-11
-06
-07
-12
-13
-20
-35
ALL OF THE ABOVE BRACKETS AND MANY OTHERS ARE AVAILABLE ON ANY OF THE ABOVE SERIES. NOTE: J SLOT ORIENTATION IS RANDOM, UNLESS OTHERWISE SPECIFIED.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
07-00-1
F7
Miniature
Lampholders
F8
75W 125V
10-00 SERIES
10-00-1 SERIES
Mini Lampholders
25W 12V
CANDELABRA BAYONET
CANDELABRA SCREW
CANDELABRA BAYONET- SINGLE CONTACT
•
•
•
•
•
•
for candelabra bayonet base incandescent lamps.
shell is plated steel to resist corrosion.
terminals are tinned steel for easy soldering of wire connections.
mounting brackets are made of .03”T x .44”W steel, zinc plated; unless otherwise specified
all mounting holes are .17”DIA & slots are .17”W x .86”L, unless otherwise specified.
terminals are placed approximately 60 to 90 degrees apart,
they can be positioned to your specific requirements upon request.
• these brackets and others which are not shown, can be interchanged with the
series shown on this page.
For example, bracket 08 would be specified in each series as follows: 10-08, 10-08-1.
-08
-02
Note: J slot orientation is random, unless otherwise specified.
-12
-13
-20
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
CANDELABRA BAYONET
12-200
SERIES
75W 125V
SERIES
25W 12V
• for candelabra bayonet incandescent lamps, plated steel shells.
• wire leads are AWM-1015/TEW-105º C, .03” insulation. Other wire types
• standard leads are 18AWG black, 6” long; stripped 1/2”.
• if you require wire lead length different than the standard 6” length, add it to
to the end of the part number (in inches) preceded by hyphen.
• mounting brackets are made from .03”T x .63”W steel, zinc plated;unless otherwise specified.
• these brackets and others which are not shown, can be interchanged with the
series shown on this page.
11-200
Series
For example, bracket 226 would be specified in each series as follows: 12-226, 11-226.
-202
-223
-208
-245
-226
SPECIFY -224 FOR RIGHT
HAND CLIP
-255
SPECIFY -265 FOR LEFT
HAND CLIP
-227
-225
-212
-211
-260
-272
-275
ALL OF THE ABOVE BRACKETS AND MANY OTHERS ARE AVAILABLE ON ANY OF THE ABOVE SERIES. NOTE: J SLOT ORIENTATION IS RANDOM, UNLESS OTHERWISE SPECIFIED.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
CANDELABRA BAYONET
single contact, 1 wire lead
grounded mounting bracket and shell.
11-200
12-200
Series
F9
CANDELABRA BAYONET
double contact, 2 wire leads.
mounting bracket and shell are grounded
independent of contacts
Miniature
Lampholders
HALOGEN CANDELABRA BAYONET
double contact, 2 wire leads.
grounded mounting bracket and shell.
22-00
SERIES
500W 125V
19/32
•
•
•
•
•
•
for candelabra bayonet halogen lamps. Rated 500W @ 125V by UL and CSA.
nickel plated steel shell and bright zinc plated brackets resist corrosion.
silver plated brass contacts are mounted in an insulating disc of molded ceramic.
wire leads are TEFLON/SEW-200º C. other wire types and terminations are available upon request.
standard leads are 18AWG black, 6” long stripped 1/2”.
if you require wire lead length different than the standard 6” length, add it to
the end of the part number (in inches) preceded by hyphen.
For example, bracket 23 would be specified as: 22-23
-02
-08
-23
-25
-26
-27
-45
-55
-60
-72
-75
MOUNTING HOLE: 15/16” DIA.
Mini Lampholders
F10
HALOGEN CANDELABRA BAYONET
-40
For other bracket types please call the factory. Note: J slot orientation is random unless otherwise specified.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
MINIATURE WEDGE BASE
23-00
SERIES
28V
23-00-1
F11
T- 3 1/4
SERIES
23-200
SERIES
28V
23-200-1
SERIES
MINIATURE WEDGE BASE LAMPHOLDERS
grounded mounting bracket, 1 solder terminal.
insulating mounting bracket, 2 wire leads.
grounded mounting bracket, 1 wire lead.
T- 5
• for low voltage miniature wedge incandescent lamps.
• High strength molded plastic housing with plated brass contacts.
• Wire leads are AWM-1007/TR64- 90º C, .015” insulation. Other wire types
• standard leads are 22AWG black, 6” long; stripped 1/2”.
• if you require wire lead length different than the standard 6” length, add it to the
end of the part number (in inches) preceded by hyphen.
• mounting brackets are made from .03”T x .44”W steel, zinc plated; unless specified.
• all mounting holes are .17” DIA & slots are.17”W x .42”L, unless otherwise specified.
with the series shown on this page.
-07
For example, bracket 02 would be specified in each series as follows: 23-02, 23-02-1, 23-202. 23-202-1.
1
.0
1
.0
0
0
AX
M
AX
M
-01
-02
-14
-11
-12
-18R
-24
PLUG FOR 5/8 HOLE
-35
-35XP11
-40PL
-62
MORE BRACKETS ON THE NEXT PAGE.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
28V
28V
insulating mounting bracket, 2 solder terminals.
Miniature
Lampholders
T1 WEDGE BASE
23 SERIES CONTINUED
Mini Lampholders
F12
-74
-288
-77R
-92
-272N
-228P-1
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
HALOGEN G4 BI PIN LAMPHOLERS
27-00
SERIES
50W 14V
HALOGEN G4 BI PIN LAMPHOLDERS
Hi-heat ceramic housing.
Insulated bracket, 2- .110 X .020 Male Tabs
F13
SERIES
50W 14V
Mini Lampholders
Hi-heat ceramic housing.
Insulated bracket, 2 wire leads.
27-200
•
•
•
•
•
for low voltage halogen G4 bi-pin lamps, insulated brackets.
hi-heat ceramic body and stainless steel contacts for long problem free life.
wire leads are TEFLON/SEW-200º C. Other wire types and terminations are available upon request.
standard leads are 18AWG black, 6” long; stripped 1/2”.
if you require wire lead length different than the standard 6” length, add it to the end of the
• a mounting bolt may be sustituted for the eyelet, add “B” to the end of the part No.
For example, bracket 23 would be specified in each series as follows: 27-23, 27-223.
-26
-23
-07
-207
-274
Hi-heat plastic body.
insulated bracket, 2- .110X.020 male tabs.
27VC-00
SERIES
20W 14V
Hi-heat plastic body.
Insulated bracket, 2 wire leads.
27VC-200
SERIES
20W 14V
For example, bracket 12 would be specified in each series as follows: 27VC-12, 27VC-212.
-01
-02
-11
-12
-24
-74
-77R
-92
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
F14
SPECIAL SOCKETS
THREADED BUSHING SOCKETS
The threaded bushing mount lampholder has several advantages over brackets or clip-on mounting systems.
They offer the security of a substantial threaded bushing and lock nut. For applications where space is at a premium,
this type offers an easy assembly method into a compact space.
Mini Lampholders
Part Number
02-30N
02-30N1
03-30N
04-30N
11-230AN
12-230BN
12-230AN
12-230BN
22-30AN
22-30BN
Lamp Type
Miniature Bayonet
Miniature Bayonet
Miniature Bayonet
Candelabra Screw
SC Candelabra Bayonet
DC Candelabra Bayonet
DC Halogen Cand Bay
DC Halogen Cand Bay
A
Thread Type
9/32-32NS
9/32-32NS
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
1/8-27NPSM
B
Thread Lgth.
3/16
3/16
1/4
1/4
5/32
1/4
5/32
1/4
5/32
1/4
O.D.
Grd. Shell
Leads
13/32
13/32
19/32
21/32
21/32
21/32
21/32
21/32
21/32
21/32
YES
YES
NO
NO
YES
YES
NO
NO
NO
NO
2
1
2
2
1
1
2
2
2
2
C
UL/CSA
Illustration
YES
YES
YES
YES
YES
YES
YES
YES
D
A
A
C
D
B
B
B
B
B
B
E
PLUG BUTTON SOCKET
The plug-button mounted system offers a simple method for mounting almost all ELECTRICAL DEVICES INC. lampholders.
They snap-in easily and securely into place. They are easily removed for system disassembly or lamp replacement.
Part Number
02-40
03-40
04-40
05-40-1
06-40-1
07-40-1
10-40-1
11-240-1
12-240XT
23-40PL
53-40PL
Lamp Type
Standard Plug Plug O.D. Head Diameter Mounting Hole
Terminations
UL/CSA
Miniature Bayonet
P10
13/16”
5/8”
2 wire leads
YES
Miniature Bayonet
P15
1 5/32”
15/16”
2 wire leads
YES
Candelabra Screw
P15
1 5/32”
15/16”
2 wire leads
YES
Miniature Screw
P9
23/32”
9/16”
Solder lug
YES
Candelabra Screw
P12
56/64”
3/4”
Solder lug
YES
Miniature Bayonet
P10
13/16”
5/8”
Solder lug
YES
P15
1 5/32”
15/16”
Solder lug
YES
P15
1 5/32”
15/16”
1 wire lead
YES
P15
1 5/32”
15/16”
2 wire leads
YES
T 3 1/4 Wedge Base
P10
13/16”
5/8”
Solder lugs or leads
YES
T 1 3/4” Wedge Base
P10
13/16”
5/8”
2 wire leads
YES
7-40-1
02-40
4-40
12-240
23-40PL2
SERIES A-96 211-2 AUTOMOTIVE LAMPHOLDER
The A-96 lampholders is designed for heavy duty automotive use. Typical applications
include dome lights for automobiles, trucks, boats, mobile homes and off road vehicles.
When used with the 211-2 cartridge type automotive lamp, the overall assembly easily
withstands the abuse of this difficult application.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Miniature
Lampholders
REFLECTOR ASSEMBLIES
An important new development in high illumination lighting systems for a wide variety of industrial and commercial
applications. Unique reflector systems offer the O.E.M. highly efficient, economical alternatives to sealed beam lighting
for a number of uses such as emergency lighting or where rugged wear is required. They are available in three sizes:
2.250” dia. -PAR18, 2.875” dia. -PAR22 and 4.250” dia. -PAR36, accomodating Wedge Base, Bi-Pin Halogen and
D.C. Bayonet. This allows for greater design flexibility as there are many readily available lamps. Special mounting brackets
assure proper filament location and optimum light output. Contact factory or your local representative for prompt response.
• the PAR 18 reflector is a direct replacement
for MR-16 type lamps.
• can be supplied with bracket mounted
sockets for T 1/4 wedge base and
G4 Bi-Pin Halogen lamps.
• the position of the socket can be adjusted for
desired beam position.
PAR22
2 7/8” DIA. REFECTOR ASSEMBLY
FOR USE WITH WEDGE BASE, HALOGEN,
D.C. BAYONET LAMPHOLDERS
• can be used with 12-200 and 23-200 Series
for incandescent lamps and with the
38-00 Series for halogen lamps applications.
PAR36
• can be used with 12-200 and 23-200 Series
for incandescent lamps and with the
38-00 Series for halogen lamps applications.
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Mini Lampholders
PAR18
F15

Mini Lampholders.qxd

Transcription

Similar documents

hemispheres t/t wire cover letter

Laverda 750S wiring modification 2

Math 335 Fall 2013, Exam 2 Key , , = 〈2 , + , −3 〉.

Cheers to our GoCu team from Korea having developed the

AMBrc DP Repair - bbk Software Ltd

MyGeiger 2.1 with SD Card Writer

Hydrastar Mounting Bracket

VideoPac G7400 AV Mod Installation Guide

Full Bio

GBC WIREBIND W15 BINDING MACHINE