catalog

Transcription

catalog

CATALOG
ENTHUSIASM IN EVERY DETAIL
ENTHUSIASM IN EVERY DETAIL!
Norwegian Quality!
LID JARINDUSTRI AS
Is a family business founded in 1948. The company is located in SteinsDALEN, north of the Hardangerfjord, Norway. Widely regarded as one of
the most beautiful fjords in Scandinavia.
Our products are sold under the trademark DALEN, and we are amongst the market leaders in several product categories. DALEN is known
for producing top quality products for professional operators in the agricultural, forestry and municipal markets.
Our vision is ”Enthusiasm in every detail”. We aim to focus on the customer, and we are constantly working towards keeping our customers
satisfied and loyal. Lid Jarnindustri is a company that listens to user feedback, and we aim to enthuse our customers.
2
Enthusiasm in every detail! INDEX
WOOD
16
FIREWOOD PROCESSOR SPECS
............................................................................................................
FIREWOOD PROCESSOR 2054
SNOW
17
An effective machine
............................................................................................................
LOG DECK 2048
18
Flexsible, robust and extendable
............................................................................................................
SNOWBLOWERS INFORMATION
04
SNOWBLOWER 2014
05
SNOWBLOWER 2013
06
Models overview and comparison
............................................................................................................
The great mountain king!
............................................................................................................
A snowblower for every job - and then some!
............................................................................................................
TELESCOPIC LOADING CHUTE,
HYDRAULIC ADJUSTABLE SIDE WING 07
LIFT
............................................................................................................
SNOWBLOWER 2011
08
A snowblower for every job!
............................................................................................................
SNOWBLOWER 2007
09
Professional V-type snowblower
............................................................................................................
SNOWBLOWER 2006
10
OPTIONAL EQUIPMENT
11
V-type snowblower
............................................................................................................
............................................................................................................
CONNECTION FRAME 1294
20
PALLET FORK 1295
21
PALLET FORK EXTENSION 2094
22
UNIVERSAL CLAW 2097
22
Flexible implement connection
............................................................................................................
Heavy duty pallet forks of various lengths
............................................................................................................
No need to leave pallet number two behind!
............................................................................................................
Safer and steadier transportation of all types of loads
............................................................................................................
ROAD
REAR BLADES OVERVIEW
BIG BAG LIFTER 1298
22
12
Comparison of Dalen Rear Blades
............................................................................................................
REAR BLADE 2022
Front mounted implement for loading and unloading
............................................................................................................
13
A heavy duty pro rear blade
............................................................................................................
GRASS
REAR BLADES 2018/2019/2021
14
DOUBLE ROUND BALE SPEAR 2299 23
SAND SPREADER 2034 15
ROUND BALE HANDLER 1590
Build the rear blade of your needs
............................................................................................................
............................................................................................................
Affordable and effective transport of round bales
............................................................................................................
24
Secure and gentle handling of round bales
............................................................................................................
DOUBLE ROUND BALE HANDLER 1592 25
Secure and gentle handling of two round bales
............................................................................................................
ROUND BALE GRAB 1591
26
Optimal for stacking round bales
............................................................................................................
Enthusiasm in every detail!
3
Snowblowers
ENTHUSIASM IN EVERY DETAIL
Information
2014
2013
2011
2007
2006
Two-stage
Two-stage
Two-stage
V-blower
V-blower
Working width, without side panels, cm
270⁸
255⁸
230⁸
---
---
Working width, w/two side panels / towed, cm
290
275
252
260
250
Working width with right wing cutting edge, cm
---
285
265
275
265
Working width with two wing cutting edges, cm
---
297
277
285
275
Working width w/ hydr. adjustable wing cutting
edge, cm
---
291-323
268-300
---
---
150-300 10
130-280 10
100-250 10
100-200
60-150
Impeller diameter, cm
90
83
75
90
80
Auger diameter, cm
95
91
83
---
---
1600
1530
1270
800
700
Model
Type
Recommended horsepower (HP)
Weight, from approx. kg
4
Towing / Reversing / Front
T/R/(F¹)²
T/R/(F¹)²
T/R/(F¹)²
T
T
Transmission towing rpm
1000³ ⁹
540/1000⁹
540⁹
---
---
Replaceable scraping edge
Yes⁵
Yes⁵
Yes4
Yes
Yes
Perforated scraping edge
¹
¹
¹
---
---
Hydraulic swivel chute
Yes
Yes
Yes
Yes
Yes
Skids / wheels
Yes/¹
Yes/¹
Yes/¹
Yes/¹
Yes/¹
PTO stub shaft
1 ¾”
1 ¾”
1 ¾”
1 ¾”
1 ¾”
PTO shaft included
No⁶
No⁶
Yes
No
Yes
Connection frame: TP=3-point, TR=Triangle
TP
TP
TP/TR
TP / 7
TP / 7
Cut-out clutch (Both augers)
Yes
Yes
Yes
---
---
Telescopic loading chute as option
Yes
Yes
Yes
---
---
--- Not applicable / ¹ Optional/ ² Very fast conversion between towing, reversing and front mounting / ³ Can be delivered with 540 rpm /
⁴ Reversible scraping edge made of hardened steel as an option / ⁵ Reversible scraping edge made of hardened steel as standard/ ⁶ Snowblower with 1000
rpm requires different PTO shafts for trailed and reverse operation / ⁷ Transition connection with floating position for Triangle as an option / ⁸ Transport
width = working
width
+ approx
20 cm / ⁹ Mobilgear 632 transmission oil (Contact your oil supplier for alternative oil) / 10 Max power limit 300 HP .
Enthusiasm
in every
detail!
Snowblower
2014
VIDEO:
w w w. d a l e n . n o
/#/2014/QR1
Sometimes size does matter! For big jobs, you need
a powerhouse on your team! For this we suggest the
2014 Snowblower. Great working width, high capasity
and an excellent throw. Clearing snowy areas is no
chore at all!
The ability to control the discharge back into the
blower housing, makes it a covenient operator in
urban areas. Alle models of the 2011, 2013 og 2014
are delivered with automatic auger coupling (cut-out
clutch).
This snowblower really comes into it’s own when
working in the most difficult conditions! Such as snowclogged roads and big snow drifts. The side walls of
the 2014 can be easily removed, with just a few bolts,
transforming this versatile snowblower - into ”The
Great Mountain King!” When the side walls have been
removed, you have additional control over the blower
and the tractor - in either the rear or front-mount
configuration. In difficult conditions, reliability is even
more important. Not only because the last thing you
want is problems, but also because when clients are
waiting - you have no time to waste! Take control over
”Old Man Winter” with the Dalen 2014!
2014
TypeTwo-stage
Working width, cm
270⁸
- with two side panels, cm
290
- between upper wing cutting edges¹, cm 284
Power requirement (HP/kW)
150-300 / 110-220
90
Auger diameter, cm
95
Weight, from approx.,kg
1600
T/R/(F¹)²
1000³ ⁹
Replaceable scraping edge (Hardox 500) Yes⁵
¹
Yes
Skids / wheels
Yes/¹
PTO stub shaft
1 ¾”
PTO shaft included
No⁶
Connection: TP=3-point, TR=Triangle TP
Cut-out clutch(Both augers)
Notes
Yes
Yes
¹ Optional
² Very fast conversion between towing, reversing and front mounting
³ Can be delivered with 540 rpm gearbox for towing
⁵ Reversible scraping edge made of hardened steel as standard
⁶ Snowblower with 1000 rpm requires different PTO shafts for trailed and
reverse operation
⁸ Transport width = working width + approx 20 cm
⁹ Mobilgear 632 transmission oil (Contact your oil supplier for alternative oil)
Front
Towing
Reversing
Cut-out clutch
5
2014
2014
Snowblower
2013
VIDEO:
This snowblower is suitable for all kinds of jobs, and is also
constructed for use with large tractors in difficult operating
conditions. Great working width and excellent throwing distance makes it capable of handling even the thoughest of jobs.
The ability to control the discharge back into the blower
housing, makes it a covenient operator in urban areas. This is
possible on all the DALEN snowblowers.
/#/2013/QR1
This snowblower is for those that need the same versatility
of the smaller 2011, but have the larger tractor and require
more capasity with increased throwing distance.
The 2013 handles all types of snow, and sizes of snow removal jobs. It is a quickchange speacialist, and can easily be adapted to all tasks required of it. The optional connected frame can quickly be moved from front to rear mounting, or to
the towing position. Sidewalls can also be quickly installed or removed, with just
a few bolts! From mountain roads to driveways...the 2013 can handle whatever
you ask of it, and then some!
2013
TypeTwo-stage
Working width, cm
255⁸
272
- with right wing cutting edge, cm
285
- with two wing cutting edges, cm
297
- with hydr. wing cutting edge, cm
291-323
Auger diameter, cm
Weight, from approx. kg
Replaceable scraping edge (Hardox 500)
Skids / wheels
PTO stub shaft
PTO shaft included
Connection: TP=3-point, TR=Triangle,
130-280 / 95-205
83
91
1530
T/R/(F¹)²
540/1000 ⁹
Yes⁵
¹
Yes
Yes/¹
1 ¾”
No⁶
TP
Yes
Yes
¹ Optional
³ Can be delivered with 540 rpm
⁶ Snowblower with 1000 rpm requires different PTO shafts for towing
and reverse operation
⁸ Transport width = working width + approx 20 cm
⁹ Mobilgear 632 transmission oil (Contact your oil supplier for alternative oil)
Front
Towing
Reversing
Cut-out clutch
6
Enthusiasm in every detail! Hydr. adjustable wing cutting edge
Dalen 2011 and 2013 with side panels can be equipped with a
hydraulic adjustable cutting edge. The extension is approx. 180
cm high, and adds 16 - 48 cm width in addition to the side panel
(32 cm in recommended working pos.), stepless adjustable.
Comes with hydr. shock absorption as std.
Telescopic loading chute
The hydraulic telescopic loading chute is ideal
for loading trucks, or throwing snow over
high snowbanks. Dual cylinders for heightextension and flap-adjustment gives a steady,
sturdy chute. 80 cm stepless height adjustin every detail!
ment. FitsEnthusiasm
all the two-stage
DALEN blowers.
7
Snowblower
2011
VIDEO:
For this universal snowblower no job is too big or too small.
The 2011 performs no matter what the conditions are,
whether it’s larger or small amounts of wet or dry snow. Big
or small tractors, narrow streets, or open spaces. In short a
reliable work partner, no matter what snow job you ask of it!
If you are a contractor, your workloads have considerable
variations. From small maintenance clean-ups after a snow
squall, to opening snow-clogged roads later on in the season.
/#/2011/QR1
Some roads may have high elevations with large amounts of dry mountain snow,
to low-lying regions with heavy slush-type snow. This a combination that many
snowblowers have problems with, but the 2011 was built to handle these extremes!
The 2011 not only handles varying snow conditions well, it quickly changes to
meet all tasks required of it. Wheter it is opening mountain roads or opening
driveways.
The optional integrated connection frame is quickly and easily moved, from towing, to reversing or front mounting. Connection 3-point or Triangel.
For reversing and front mounting, it is delivered with no side walls, and for use in
the towing position - the sidewalls can be attached quickly with only a few bolts!
Good throwing distance, and the ability to direct the discharge back into auger
housing, makes it ideally suited for rural or urban areas.
The 2011 handles whatever you ask of it!
201 1
TypeTwo-stage
Working width, cm
230⁸
252
- with right wing cutting edge, cm
265
- with two wing cutting edges, cm
277
- between top cutting edges, cm
245
- with hydr. wing cutting edge, cm
268-300
Auger diameter, cm
Weight, from approx., kg
Skids / wheels
PTO stub shaft
PTO shaft included
Connection: TP=3-point, TR=Triangle
100-250 / 75-185
75
83
1270
T/R/(F¹)²
Yes⁵
540
¹
Yes
Yes/¹
1 ¾”
Yes
TP/TR
Yes
Yes
¹ Optional
⁸ Total working width + approx. 20 cm
See page 4 for comparison of Dalen-snowblowers
See page 11 for models overview and optional extras
Front
Towing
Reversing
Cut-out clutch
8
Enthusiasm in every detail! Snowblower
2007
The Dalen 2007, V-type snowblower is designed for those in a hurry. The V-blower
enables higher speeds compared to a two-stage, and is optimal for quick roadclearing with smaller amounts of snow.
The principles behind the design is tried and tested through decades. This includes
an assymetrical design which gives more effective feeding and less resistance, and
hinged feeding fan-blades which dodges foreign elements coming into the blower.
The snowblower has great capacity and a very good throw, stemming from the fact
that the chute and impeller is the same as in our top model 2014! This blower is
designed to handle large tractors, and get those roads cleared from snow quickly!
2007
TypeV-blower
Working width, cm
260
- with right wing cutting edge¹, cm
275
- with two wing cutting edges¹, cm
285
100-200 / 45-150
Toothed scraping edge
Skids / wheels
PTO stub shaft
PTO shaft included
90
800
T
Yes
¹
Yes
Yes/¹
1 ¾”
No
TP7
¹ Optional
7
Transition connection with floating position for Triangle as
an option
VIDEO
/#/2007/QR1
9
Snowblower
2006
The Dalen 2006 V-type snowblower is designed for rapid removal of smaller amounts of snow. The V-blower enables higher speeds compared to a twostage, and is optimal for quick road-clearing with smaller amounts of snow.
The principles behind the design is tried and tested through decades. This includes
an asymmetrical design which gives more effective feeding and less resistance, and
hinged feeding fan-blades which dodges foreign elements coming into the blower.
Dalen 2006 combines good capacity with moderate power requirement. The chute and impeller is the same as in the Dalen 2013!
2006
TypeV-blower
Working width, cm
250
- with right wing cutting edge¹, cm
265
- with two wing cutting edges¹, cm
275
60-150 / 45-110
Toothed scraping edge
Skids / wheels
PTO stub shaft
PTO shaft included
80
700
T
Yes
¹
Yes
Yes/¹
1 ¾”
Yes
TP7
¹ Optional
7
Transition connection with floating position for Triangle as
an option
10
Enthusiasm in every detail! 0278-130D / Top link bracket with float 2012-550 / Support wheels (two), 6.00x9”
Wing cutting
edge
2006-600 H/V
21 kg
2005-340 / Support wheel (one) 5.00x8” / Wing cutting
edge
2007-600 H/V
Wing cutting
edge
2011-530 H/V
Hydr. adjustable
wing cutting edge
2011-700
2012-600KB / Front gear w/PTO-shaft / 66 kg
2012-500PM / Perforated scrapig edge,
mounted instead of standard scraping edge
Side panel
2011-250 H/V
/ heavy duty tires / 73 kg
2012-550 / Support wheels (two), 6.00x9”
2011-700 / Hydr. adj. wing cutting edge/ 140kg
10 cm / 31 kg
/ 45 kg (2011-530V/H)
2007-600V / Wing cutting edge, left,
10cm / 34 kg
15 cm / 37 kg
2011-530V / Wing cutting edge, left, 12.5 cm
2011-530H / Wing cutting edge, right, 12.5 cm
2014-550 / Swivel stopper / 2 kg
2007-600H / Wing cutting edge, right,
2011-250V / Side panel* left, 10 cm / 54 kg
0990-300 / Hydraulic adjustable flap / 8 kg
15 cm / 42 kg
2011-250H / Side panel* right, 10 cm / 54 kg
2006-800 / Linkage extension, 3-point / 41kg
2006-600V / Wing cutting edge, left,
2006-600H / Wing cutting edge, right,
/ 44 kg
/ Instead of std chute / 125 kg
0980-TR / Triangle linkage with float position 0994-UT / Hydr telescopic loading chute
2006-800 / Linkage extension, 3-point / 41kg
0994 / Hydr telescopic loading chute / 125 kg
0990-300 / Hydraulic adjustable flap/ 8 kg
0980-TR / Triangle linkage with float pos. 44kg
position / 4 kg
L01-126 / PTO-shaft (540 rpm)
0278-130D / Top link bracket with float position / 4 kg
ADDITIONAL EQUIPMENT
adj. flap / skids / PTO-shaft
/ 50kg (2013-530V/H)
Side panel
2013-250 H/V
Wing cutting
edge
2013-530H/V
2014
11
Upper wing cutting
edge
2014-625 H/V
Side panel
2014-620 H/V
* Side panels are mainly used for towing. The open
side walls make the 2011, 2013 and 2014 easy to
control in all conditions, even when mounted on the
front or when reversing.
2014-500PM / Perforated scraping edge,
2014-625V / Upper wing cutting edge left 38kg
2014-625H / Upper wing cutting edge right 38kg
2014-620V / Side panel* left, 9 cm / 60 kg
2014-620H / Side panel* right, 9 cm / 60 kg
2012-600KB / Front gear w/PTO-shaft / 66 kg
2012-550 / Support wheels, 6.00x9”
0994-2014UT / Hydr telescopic loading chute
0994-2014 / Hydr telescopic loading chute / 125 kg
Can be special ordered with 540 rpm transmission for towing.
2014-XTPA/ SNOWBLOW. TWO STAGE
/ 1600 KG
Working width: 270 cm / w/o side panels* /
transmission for towing 1000 rpm / 3-point /
hydraulic swivel / adjustable flap (see sketch) /
skids / cut-out clutches / w/o PTO-shaft
NOTE: Reversing requires seperate PTO-shaft
dalen.no/en/2014
Hydr. adjustable
wing cutting edge
2013-700
2013-500PM / Perforated scraping edge,
2013-700 / Hydr. adj. wing cutting edge / 140kg
2013-530V / Wing cutting edge, left, 12.5cm
2013-530H / Wing cutting edge, right, 12.5cm
2013-250V / Side panel* left, 8,5 cm/60 kg
2013-250H / Side panel* right, 8,5 cm/60 kg
2012-600KB / Front gear w/PTO-shaft /66 kg
2012-550 / Support wheels (two), 6.00x9”
0994-UT / Hydr telescopic loading chute
0994 / Hydr telescopic loading chute / 125 kg
2007 / SNOWBLOWER,V-TYPE / 800 KG
Working width: 260 cm / 3-point / hydraulic swivel /
adj. flap / skids / without PTO-shaft
2006-N / SNOBLOWER,V-TYPE / 700KG
2013-TPA / SNOWBLOWER, TWO STAGE
/ 1530 KG
Working width: 250 cm / w/o side panels* /
3-point / hydraulic swivel / adjustable flap (ses
sketch) / skids / w/o PTO-shaft / cut-out
clutches / transmission for towing 540 rpm
2013-XTPA / transmission for towing 1000
rpm
NOTE: Reversing requires seperate PTO-shaft
Working width: 250 cm / 3-point / hydraulic swivel /
dalen.no/en/2013
2011-TPA / SNOWBLOWER, TWO STAGE
/ 1270 KG
Working width: 230 cm / w/o side panels*
/ hydr. swivel/ adjustable flap(see sketch) / skids
/ PTO-shaft / cut-out clutches / 3-point connection
2011-TRA / Triangle connection
2013
dalen.no/en/2011
201 1
dalen.no/en/2007
2007
dalen.no/en/2006
2006
Enthusiasm In Every Detail!
Road Maintenance!
All Dalen blades are designed with a hollow profile boom. On
the 2022 this profile can be filled with flat steel for increased
weight. The increased weight provides for better scraping, a better job leads to more satisfied customers! Less snow left behind,
means less risk of ice on the road when the temperature drops.
The maximum weight gain is 205kg.
The Dalen 2022 is a strong, professionally constructed blade, and
is ideally suited for high-horsepower tractors.The design ensures
great capasity and makes it possible to throw the snow over
snow banks or guard rails.Your big tractor would look great with
a high-strength professional blade attached to it!
2018
2019
2021
2022
Working width, cm244275300300
Working height, cm65656568
Working height wing, cm---99
Control of the bladeM/HM/HM/HH
Control of boomM/HM/HM/HH
Weight from, kg420480500615*
M - manual, H - hydraulic, * Blade weight can be increased by up to 205 kg, see page 11
12
Enthusiasm in every detail! 2022
Tractorblade
MORE INFO
The Dalen 2022 has a great design, in addition to high-functionality and reliability that is required for your operation. Your
customers will be assured that when they are counting on you,
your equipment will work! The 2022 is mounted asymmetrically
so that the right side is longer then the left. You do not have to
drive all the way upto the snowbank when plowing. When reversing the blade, it is the left side that passes under the beam. This
allows for a shorter beam, which in turn positions the centre
of gravity back towards the tractor, thus giving better blade and tractor control.
This really comes into it’s own when plowing up hill, or when plowing wet and
heavy snow.
The right side of the blade has an integrated discharge wing, with a height of
99cm, and makes it possible to drag and throw large
amounts of snow. The blade is supported by bearings in
the upper and lower beam attachment. This results in
less wear and longer life. Adjustment of the blade angle
can be done hydraulically from the cabin, and can be
easily switched from pulling to reversing. The hydraulic security system is done by valves, that helps prevent
damage to the equipment in the event of a collision with
an obstacle.
2022
2022
Working width
Working height
Working height, wing
Blade control
Boom control
Weight, from
300 cm
68 cm
99 cm
hydraulic
hydraulic
615 kg*
*Ability to increase the weight up to 205 kg when loading flat steel in
the dozer
2022-TP / REAR BLADE / 615 kg *
Integrated three-point linkage / 300 cm working width
/ hydraulic control of boom and blade / without wheels
2022-TR / REAR BLADE / 615 kg *
Integrated Triangle / 300 cm working width /
hydraulic control of boom and blade / without wheels
OPTIONS: Manual or hydraulic wheels, 5.00x8” or 6.00x9” truck tires
The dozer can be filled with flat steel.
13
Rear blade
2021 / 2019 / 2018
MORE INFO
The Dalen 2018, 2019 and Dalen 2021 are rear blades for all
conditions.Your needs determine the equipment level, whether
you are a small farmer or are a busy entrepreneur with full order books. Dalen reliability is nevertheless appreciated.
The mechanical control locks the blade to the barrier with a
bolt that also acts as a safety bolt on overload. The mechanical
barrier also swivels and is adjustable in five different angles. The
blade is reversible and can be locked in seven different angles when
sweeping and reversing. Overall 70 different positions can be selected. The blade can be equipped with hydraulic control of barrier
and / or blades. The blade can thus be turned hydraulically from
the driver’s seat. Hydraulic controls can be retrofitted if your
needs change.
The optional shock loading valve prevents damage to the equipment. In the event of a collision with manhole covers, curbs
and similar the hydraulic oil will be lead via the shock load
valve to the other side of the piston, and the blade yields.
The Dalen 2018, 2019 and Dalen 2021 are asymmetrically
mounted. This means that the blade’s right side is sticking
out further than the left, and you will not have to drive
all the way out into the snow bank when plowing. When
rotating the blade, it is the left (shorter) side of
the blade that goes under the boom.This
allows for a shorter barrier witch positions the center of gravity closer
to the tractor, thus having better
blade and tractor control when
plowing. This is especially
appreciated when plowing
uphills or when plowing
heavy, wet snow.
14
2021-TP/-TR/ REAR BLADE/ 300 cm
Mechanical boom and blade control
2021-TPS/-TRS/ REAR BLADE / 300 cm
Hydraulic blade control, mechanical boom control
2021-TPH/-TRH/ REAR BLADE / 300 cm
Hydrualic boom and blade control
All models: asymmetric mounting / without guide wheels
2019-TP/-TR/ REAR BLADE / 275 cm
2018-TP/-TR/ REAR BLADE / 244 cm
-TP=3-point linkage / -TR=Triangle linkage
OPTIONS: Hydraulic pole control, hydraulic blade control, breakback valve
(recommended), edge wing, manual or hydraulic support wheels w / 5.00x8
”or 6.00x9” heavy duty tires.
202120192018
Working width:, cm
Working height, cm:
Blade control:
Boom control:
Weight from, kg:
300
275
244
65
65
65
man./hydr.man./hydr.man/.hydr.
man./hydr.man./hydr.man./hydr.
500
480
420
Sand spreader
2034-W/ 2034 / 2034-S
MORE INFO
The spreader 2034 is hydraulically driven and comes in
three models; 2034-W (225 cm working width*, 1500
liters), 2034 (200 cm working width*, 1300 liters), and
2034-S (150 cm working width*, 750 liters). The design
makes the spreader both easy to fill and lift. Our
customers are particularly pleased that it can be filled
to capacity - even when the sand is obtained from
storage. An even spreading of sand and grit is an important result to achieve. This is ensured because the auger is continuously providing the feed roller with new material. The feed roller can be
adjusted from 0-150 rpm, precisely regulating the flow. The spreading is
also controlled by a rubber flap that presses against the feed roller, and
by the tractor ground speed. See technical data for the material flow
table. The spreaders bearings are well protected, placed on the outside.
The DALEN 2034 is connected to the tractor with the Dalen 1294
connection frame, and can be both front and rear mounted.You can
even do this if your tractor have different connection systems- all you
need is an extra 1294 connection frame. Front mounting provides
increased traction, and if the tractor is large enough a spreader can be
mounted on the front and on the rear. This provides for extra spreading
capacity and longer range.
2021
2034-W
2034
2034-S
Volum (liter): 1500
1300
750
Workizng width (cm):
225*
200*
150*
Weight, from (kg):
575
420
305
Transporting Width (cm):
250225170
Height (cm): 120
Length (cm):
120120105
115
100
2034-W / SAND SPREADER / 575 kg
Hydraulic / 2.25 meter working width1 / 1500 liter /
without connection frame and telescopic top link
2034 / SAND SPREADER / 420 kg
2034-S / SAND SPREADER / 305 kg
* Working width depends on the tractor ground speed, feed roller
rpm, height from the ground, opening of the rubber flap etc.
Top link is not included
OPTIONS: Dalen connection frame, cover plate (81x20 cm, mounted
in the bottom of the spreader), toplink extension for 3-point or for
Triangle and (12 cm), cover set (only available for 2034).
See connection frames page 19.
15
ENTHUSIASM I EVERY DETAIL!
Firewood processors
Trees have the ability to create comfort and excitement. Birds live in them, children climb in them, they
provide shade on hot, sunny summer days. And even in the wintertime, when days are shorter and
weather is cold, they create a warm and pleasant atmosphere by providing firewood.
Drive / function
Machine drive:
2054
Chain drive:
Bar movement:
Infeed conveyor:
Blade height:
Discharge conveyor (optional):
Sawdust extractor fan (optional):
Log holder
Tractor (from 40 HP)1
Electric2, 11 kW
Combi tractor-/ electric2
Hydraulic
Hydraulic
Hydraulic
Hydraulic
Hydraulic drive
Hydraulic drive
Manual
Cutting
Bar / sprocket:
Bar length:
Cutting diameter:
Chain type:
Chain lubrication:
Chain lubrication, tank:
Cut. length indicator, yielding:
harvester equipment
54 cm
max 44 cm
0.404” chain, 1.6 mm
Adjustable oil pump
3.5 liters
Adjustable, 15-40 cm
Splitting
Stroke, cylinder:
Splitting force, fast mode:
Splitting force, power mode:
Activation of power mode:
Knife, division:
Splitting cycle, back/forth:
52 cm
7.7 tons/200 bar
11.3 tons/200 bar
Manual
4, 6 or 10 3
2.9 sec. 7
Hydraulics
Oil tank, approx:
Oil delivery, pumps, approx:
67 liters, delivered with oil
pump 1: 55 l./min. 4
pump 2: 8 l./min.5
Revolutions, PTO:
Connection to tractor:
400 rpm
DALEN Connection frame
Miscellaneous
Discharge conveyor length
Weight, from:
2.95/3.4/4.3 m (optional)
655 kg.
1)
Depending on tractor. 2) 230V (50 amp. fuses recommended) or 400V (32 amp. fuses recommended). 3) Core: 150 mm 4) Splitter and saw chain 5) Infeed conveyor, knife adjustment, bar
movement, and log deck (optional) 7) Theoretically calculated quick cycle time and with no
load in place on the slide (approximately).
16
Enthusiasm in every detail! Firewood processor
2054
VIDEO
The 2054 is a fully hydraulic
machine for quality conscious
customers with high demands
for efficiency, functionality and
usability.
Hoses and other components are dimensioned
to handle the large oil flow to prevent
overheating and ensuring a fast splitting cycle.
It is easy to measure the oil level on the tanks
for chain oil and hydraulic oil.
Fully hydraulic steering makes
DALEN 2054 is equipped with a chain saw
for harvesters. The 54 cm sword has a 0.404”
hydraulically driven saw chain. The hydraulic
chain saw stops when the operating handle
for the saw is released. This is a big advantage
when it comes to wear and tear, safety and
reduced noise. A small adjustable oil pump is
activated every time the saw bar is operated,
and ensures that the chain is lubricated.This is
very important during changing temperatures,
and especially during cold weather. The chain
is lubricated with oil from a separate tank
containing chain saw oil, because hydraulic oil
can damage your health.
the operation of the machine
/#/2054/QR1
easy and effective.
DALEN 2054 is powered hydraulically on
all operation functions. The fully hydraulic
control is more dependable, because it does
not include V-belts, which causes wear and
tear as well as the need for tightening.
•
•
•
Hydraulic bar movement
Hydraulic infeed conveyor
Hydraulic knife adjustment
All hydraulic functions are operated with one
hand using an easily accessible handle. Less
used functions have their own operating
handles. Direct hydraulic operation gives the
operator full control of the bar movement.
The machine automatically restrains the
pressure on the log in order to produce the
highest possible velocity.
The 2054 is fitted with two hydraulic pumps,
which allows the operator to adjust the
discharge conveyor belt speed independently
from other functions.
2054
The splitter has two speed levels: 7.7 ton
splitting power in fast mode and 11.3 ton
splitting power in power mode. The cylinder
has a short stroke, making it very effective
when producing firewood. The splitting cycle
is approx. 2.9 sec. Depending on choice of
splitting knife, the powerful cylinder splits the
log into 10, 6 (std) or 4 pieces of firewood.
The tractor’s PTO is operated at 400 rpm.
Because of the low rotational speed, there is
less noise and lower fuel-consumption.
During adjusting, filing or changing of
components, the protective covers of the
machine can easily be opened. When the
protective cover for the saw is open, the
feeding/input table can be opened so that
you will easily access the other components,
and troubleshooting and maintenance can be
carried out in an upright position.
The machine has a clear-cut design which
makes it possible for the operator to gain The DALEN 2054 is connected to the tractor
full control of the machine, and have a good with the DALEN Connection frame.
overview of the cutting and splitting process.
The hydraulic feeding conveyor makes the
input of the logs much easier. The wide
feeding-table makes it easier to support the
logs even if they are outside the belt. The
design of the protective covers gives you
ample space during the input of large and bent
logs. The machine is most effective when fed
with logs that are up to 35 cm in diameter, but
can cut logs up to 44 cm in diameter.
17
Log deck
2048
MORE INFO
The effectiveness of a firewood processor depends, among other things, how fast you can feed fresh logs into the machine.
The log deck is loaded by means of a pallet fork (with a universal claw) or timber claw. The operator does not have to do any
unnecessary hoisting. The logs are fed into the machine with the aid of mechanical or hydraulic rollers, or a hydraulic feeding
table with 3 rollers. The roller(s) are connected in series with the feeding conveyor of the firewood processor, and are operated
with the same lever.
The 2048 model is designed in a flexible way so that it can be assembled according to the preference of the user, either the logs
are one or five meters. You can either select one of the two package deals, or put together a solution which satisfies your own,
specific demands. The existing solutions can be extended with more sections and additional rollers, hydraulically or mechanically operated, if the
demands change.The log deck is easily coupled to the Dalen 2054 using the external hydraulic couplings on the side of the processor, or by easily
installing the included hydraulic couplings inside the machine.
2048
Options: The two packages can be extended, or a user specified solutions can be put together using these parts.
2048-020
Section
2048-030
Attachment profile, large
2048-032
Attachment profile, small
2048-034
Stake
2048-M / LOG DECK / 180 kg
Manual / consist of: 2 pcs sections
(2048-020), 1 pc mechanical roller
(2048-170), 2 pcs attachement
profile, large (2048-030), 2 pcs stakes
(2048-034)
18
Enthusiasm in every detail! 2048-120
Hydr. innfeed
2048-150
Hydraulic roller
2054-170
Mechanical roller
2048-200
Incline ramp for section
2048-H3 / LOG DECK / 330 kg
Hydraulic / consist of: 3 pcs sections
(2048-020), 1 pc feeding table with 3
rollers (2048-120), 2 pcs attachment
profile, large (2048-030), 2 pcs stakes
(2048-034)
ENTHUSIASM IN EVERY DETAIL!
Lifting and grass handling
equipment!
Between the deep fjords and high snowy mountains in Norway you’ll find valleys and steep hills. Many of the
norwegian farmers live here. Therefore, there is great variation in the use of DALEN products. We see customers
using our snowblowers on snow-clogged mountain roads, producing firewood with our firewood processors at
the farm, or using our implements, like pallet forks and round bale handlers, in order to improve the efficiency on
the big farms. Our goal is to have satisfied customers, wherever they are. Therefore our vision is «Enthusiasm in
every detail!»
19
Connecting frame
1294
MORE INFO
By choosing Dalen lifting equipment your options are open if your needs change. The reason for
this is the Dalen Connection frame, which is the starting point for all our lifting equipment, and
can also be used on several other products.The frame is a flexible and cheap solution. For example, you can use a pallet fork, round bale equipment and big bag lifter on the same connection
frame - easy and affordable.
1294-001 3-point
Thousand of satisfied customers are already using our connection frames with one or more implements. The frames are delivered in various widths, and can be both front- and rear mounted. If you are sharing
implements with someone (even if they are using other types of tractor-connection), you only need one frame
each in order to use the same equipment.You can choose from the following frames
Standard frame - 1.0 m (se sketch)
Wide connection frame - 2.0 m. (3-point, A-frame, Trima, Euro, Ålø)
1294-101 A-frame / Triangle
1294
1294-201 Trima
1294-351 Euro
(Ålø-Euro combi loader)
1294-331 Euro
(John Deere loader)
1294-301 Ålø
1294-381 Volvo BM
(top hinge Ø60)
1294-401 Blank
(for welding)
20
Enthusiasm in every detail! Pallet fork
1295
MORE INFO
You’ll find a Dalen Pallet fork on most Norwegian farms. It’s superior strength gives you a wide range of use – some of the
stories we hear are unbelievable.
Single forks, which are delivered in three lengths (78, 98 or 112 cm), are combined with Dalen connection frame (standard,
wide or lifting). The Dalen pallet fork(2 forks) has a maximum loading capacity of 2000 kg (50 cm from the upright bar), and is
manufactured from high-strength steel. This makes it possible to manufacture an exceptionally strong fork that is only 30mm
thick, thus the pallet fork is ideal for stacking boards on 2” thick ground beams.
1295
1295
112 cm
1295-M
98 cm
1295-K
78 cm
21
Big bag lifter, Pallet fork extension and Universal claw
1298 / 2094 / 2097
1298
1298-F / Big bag lifter / 40 kg
For front loader / without connection frame
OPTIONS: Dalen connection frame
MORE INFO
There are various kinds of big bags,
and their content varies even more.
They are used in most industries, not
only in aggriculture, and are frequently
transported using a pallet fork. The Big
bag lifter from Dalen provides a steadier and safer handling, and far better
lift height.
The big bag lift is very versatile and it provides extra lifting height when mounted on a front loader, but can also
be safely used on a rear loader. Bag support ensure safer handling and prevents the bag from oscillating during
transport. Max load is 1000 kg, height to hook is 140 cm
and it weighs 40 kg (without connection frame).
2094
You have probably experienced it
many times. How
annoying it is to
leave the second
pallet behind? The
fork extensions fits
all Dalen forks. They have the same
standard shape and are easily pushed
onto the forks, and easily removed
when needed. The low weight makes them easy to handle, and with a
height of 3-6 cm you can still move
materials.
The two metre extensions make it
possible to move two pallets at the
same time, and make it easier to position pallets on locations that are difficult to reach with standard forks. In
many cases the fork extensions will
help you make more efficient use
of your storage space, and with the
2094 you can even load trailers from
one side. Max load capasity is 1000
kg, 100 cm from the forks upright for
a complete pallet fork.
MORE INFO
22
The Dalen 2097
Universal Claw is,
as the name implies, a universal
implement. It can
be used on site,
along the road, in
the woods or at home in the yard,
the application limits are set by your
imagination. The claw provides safer
and steadier handling of all types of
cargo with Dalen Pallet forks.
The universal claw is ideal for users
of firewood processors when piling
logs on log decks, and then transporting the full big bags later on.With the
claw in an upright position, the pallet
fork can still be used as normal. The
claw weighs 31 kg, is pushed onto the
Dalen connection frame, and has a
max opening of 135 cm.
MORE INFO
Double Round Bale spear
2299
The Double round bale spear 2299 is an affordable and effective implement for
transporting two round bales. Ideal for shorter transport from storage to feeding.
The spears make it easy to collect the bales even if they are inconvenient situated.
Dalen 2299 comes with 6 tines, three for each bale, which gives a good hold on the
bales. The bale spear comes with integrated linkage for A-frame (2299-TR, shown
on picture) or Trima (2299-HM). Integrated linkage enables rapid connection of the
implement, and also gives a gravity point close to the tractor, which is beneficial for
the stability of the tractor.
1590
Tines:
Upper:
Two 1100mm
Lower
Four 810mm
2299-TR / DOUBLE ROUND BALE SPEAR / 118 kg
6 tines / Integrated A-frame linkage
2299-HM / DOUBLE ROUND BALE SPEAR / 113 kg
6 tines / Integrated Trima linkage
The spear is manufactured using the latest production technology, which helps to
ensure top quality and competitive price.
23
Round bale handler
1590
MORE INFO
The round bale handler 1590 has rotating stakes that ensures
secure and gentle handling of wrapped round bales.
Every round bale contractor strives to deliver top quality round
bales. Proper baling, proper plastic wrapping and finally secure
and smooth transport to storage is important.
The 1590 is an ideal implement for transporting bales. The two
rotating stakes provides gentle handling of wrapped bales, thus
preserving the forage quality. Use of the bale handler reduces the risk of air leakage,
minimizing the likelihood of spoilage. The bales can be transported over long distances using the bale handler, especially when the optional upper arm is mounted.
The arm ensures stability, when operating on rough terrain.The bale handler can be
front and rear mounted with the Dalen Connection frame. When frount mounted
the bales are easily stacked.
Lubrication points on exposed parts provides reliability during operation and longer life.
24
Grip range:
39 - 168 cm
Grip range with upper arm:
maks. 150 cm
Length, upper arm:
120 cm
Weigth, without frame:
155 kg
1590 / ROUND BALE HANDLER / 155 kg
For standard connection frame / without standard connection frame
OPTIONS: Standard connection frame, upper arm, spike set,
extension hose kit for front loader mounting (6 m)
Double Round Bale Handler
1592
The Double Round Bale Handler 1592 is designed for secure and gentle handling
and transport of two wrapped round bales. Four rotating rollers prevent damage
to the plastic, and the two separate hydraulic cylinders give you full control over
loading and unloading.
The rollers on 1592 handle the wrapped round bales gently, with minimal risk of air
leakage and loss of forage quality.
With a large max opening between the rollers of 157 cm, one can lower the rollers
over the sides of the round bale. Two individual cylinders enable you to collect one
bale at the time, or two at the same time. The cylinders also ensure a firm grip on
the bale for secure transportation.
1590
Grip range:
79 - 157 cm
Weigth, without frame:
335 kg
1592 / DOUBLE ROUND BALE HANDLER / 355 kg
For Dalen Connection frame (not included)
OPTIONS: Standard connection frame, spike set, extension
hose kit for front loader mounting (6 m)
Dalen 1592 utilizes the Dalen Connection frame system, meaning you can choose
whichever connection you prefer for your tractor (pictures shows A-frame connection frame).
Image may differ from delivered product
25
Round bale grab
1591
1591
MORE INFO
The Round Bale Grab 1591 has curved and rounded grip arms and
ensures secure and gentle handling of wrapped round bales.
Every round bale contractor strives to deliver top quality round
bales. Proper baling, proper plastic wrapping, and finally secure and
smooth transport to storage is important.
This round bale grab is a flexible implement for transporting round
bales, also on longer distances. The grab has rounded arms, which
gently grabs the bales, preserving the plastic wrap and the forage quality. The float
feature on the Dalen 1591’s arms makes the stacking more efficiently and enables
bales to be stacked close together. An important advantage when moving bales for
storing or transport. The bale grab comes with integrated Trima linkage or ready
to connect to the Dalen connection frame (Model 1294). The integrated linkage
positions the arms closer to the tractor, while the connection frame provides greater flexibility. Several users can use the same implement, even if they do not have
the same tractor linkage - only additional connection frame is all that is needed.
26
Enthusiasm in every detail! Grip range, outer grip:
36-160 cm
Grip range, middle:
84-150 cm
Demand for double-acting output:
1 pcs
Weight, from:
140 kg
1591 / ROUND BALE GRAB / 150 kg
For Dalen connection frame (not included)
1591-HM / RUNDBALLEGRIPER / 140 kg
Integrated TRIMA-connection
OPTIONS: Dalen connection frame, extension hose kit for
front loader mounting (6m), anti-creep valve with hoses
27
Your dealer:
All information presented in this catalog is based on latest product informations and photos available at
the time of publication. Lid Jarnindustri AS reserves the right to make changes in design and specifications
without further notice to any products herein, and assumes no liability for catalog errors or omissions.
Lid Jarnindustri AS
Steine 35, 5600 Norheimsund, Norway
Internet: www.dalen.no
Contact: [email protected]
Telep./ Fax.: + 47 56553800 / +47 56553810

catalog

Transcription

Similar documents

Geartek email brochure

Ammann-Yanmar ViO50 Specifications

Hydraulic HGV Ball Joint Separator Hydraulic Ball Joint

MM2260 Mid-Mount Hydraulic Boom Mower

Paul Strisik NA - American Fine Art Magazine

Broadband users: the PDF

Tree Spade - Earthworm Machinery Attachments

Haul Master - Prairie Sky Equipment Ltd.

Notice W Pocket GB mollette