Android Smart Home Touch Panel User Manual

Android Smart Home Touch Panel
User Manual
Before using the product, please read the user manual carefully.
Shenzhen Hi-Champ Technology Co., Ltd.
Add: 3rd Floor, Block C, Unis Info port, North Area, Hi-Tech Industrial Park,
Nanshan District, Shenzhen, China
Tel: 0755-86368933
Fax: 0755-86368977
Web: www.neuwill.com
Email: [email protected]
Android smart home touch panel is based on community smart home system,
combining multiple smart home systems in the community together by the
community sever and application software to do centralized management and
resources sharing. Take advantage of the advanced computer techniques,
embedded system techniques, networking communication techniques, home
appliance techniques, wireless control techniques, combine home life related
sub-systems together. Through the general control, not only realize the
community security monitoring, but also combine home smart control,
information and consuming services together, make the home life more
comfortable, safer and effective, providing smart life space to the residents.
As the core product of smart home system, android smart home touch panel
integrates smart management, video intercom and media amusement
together. It is the perfect combination of modern hi-tech with smart life and
leads the trend of global smart home life.
Content
1. Feature & Function
2. Touch panel illustration
3. Installation illustration
4. Ports and wiring illustration
5. Technical parameters
6. Network connection
7. First page
7.1
Bottom status bar
7.2
Weather report and date
7.3
Shortcut key
7.3.1 Calling
7.3.2 Home automation
7.3.3 Security alarm
8. Home page Ⅰ
8.1 Home automation
8.1.1 Combination control
8.1.2 Timing control
8.1.3 Temperature control
8.1.4 Linkage control
8.2 Instant messenger
8.3 Help
8.3.1 Device info
8.3.2 Module status
8.3.3 User help
8.4 Monitoring
8.5 Repair
8.6 Service
8.7 Advice
8.8 More
8.8.1 Room shortcut
8.8.2 More shortcuts
9. Home page Ⅱ
9.1 Basic setting
9.1.1 Network setting
9.1.2 Home address
9.2 Intercom setting
9.3 Home automation setting
9.3.1 Room management
9.3.2 Sensor management
9.3.3 Device management
9.3.4 PANID address
9.4 Security setting
9.4.1 Alarm delay
9.4.2 Security mode
9.4.3 Arm delay
9.4.4 Alarm setting
9.5 Scene setting
9.5.1 All on/off setting
9.5.2 Scene setting
9.6 Preference setting
9.7 System setting
9.7.1 Language setting
9.7.2 Input method
9.7.3 Date/time
9.7.4 Password
9.7.5 WiFi
9.8 Maintain
10. Create zigbee network
10.1 Add zigbee module
10.2 PANID address setting
10.3 Input PANID address
10.4 Zigbee home automation control
10.4.1 Single control
10.4.2 Scene control
10.4.3 Infrared home appliances single control
10.5 Zigbee home automation code clearing
10.5.1 Single control code clearing
10.5.2 Scene control code clearing
10.5.3 Infrared home appliances control code clearing
10.6 Other
11. Community info
12 AppendixⅠRF Home automation control
12.1 Add RF module
12.2 Add devices
12.3 Coding/control
12.3.1 Single coding/control
12.3.2 Scene coding/control
12.3.3 Infrared home appliances coding/control
12.4 Coding clearing
12.4.1 Single coding clearing
12.4.2 Scene coding clearing
12.4.3 Infrared home appliances coding clearing
12.5
Other
1. Feature & Function
1. Android OS
2. Colorful LCD screen
3. Support Ethernet and WiFi
4. Touch screen operation
5. Digital video intercom
6. Video surveillance
7. Security alarm, support alarm linkage and alarm snapshot
8. Browse website, community service and online shopping
9. Video message leaving
10. Door to door video intercom
11. Multimedia playing
12. Wall mount type
2. Touch panel illustration
Picture 2-1 Front view
Picture 2-2 Back view
3. Installation illustration
4. Ports and wiring illustration
5. Technical parameters
CPU: dual-core ARM cortex-A9 core processor
RAM: 512B (DDR3)
Flash: 4GB (Nand Flash)
External memory: TF card
Camera: CMOS 2 mage pixel
LCD: 8 bit led
Resolution: 600*1024
Interface: RJ45/WiFi/RS485/Alarm input*4
Power supply: DC 12V
Power: <7W
6. Network connection
Please follow the steps below:
Ethernet:
(1) Get the dynamic IP address: Home page→click the time at the right
bottom status bar→not connect to Internet (setting) →Setting→Ethernet→
Choose to use Ethernet→touch panel will get the dynamic IP address
automatically.
(2) Static IP setting: Home page→click the time at the right bottom status bar
→not connect to Internet (setting) →Setting→Ethernet→Static IP setting
→Choose to use static IP address→Setting (IP address, default gateway,
subnet mask code) →Click “Save” to return to the previous menu→
Choose to use Ethernet.
WiFi:
Home page→click the time at the right bottom status bar→not connect to
Internet (setting) →Click WiFi→Choose to open WiFi→WiFi connection icon
will appear at the right bottom.
7. First page
First page includes four parts: bottom status bar, weather report and date,
community info and shortcut (calling, home automation and security alarm),
convenient to use.
7.1 Bottom status bar
: Back to the previous menu
: Back to Home page
: WiFi connection
: Open Bluetooth
: Ethernet connection
: New device adds in
: Community info and video message, when there is any community
info or video message unread, it will flash.
: Instant messenger function starts up
7.2 Weather report (not ready) and date
When power on, it will enter Home page. If touch panel connects with Internet,
it will get the local weather report automatically. Local weather report appears
on the right shown as the picture below (picture 7-1).
picture 7-1
In picture 7-1, clicking the area of weather report, it will show the local
weather report for the next six days, with temperature, wind speed (shown as
picture 7-2).
picture 7-2
Clicking the area of date, it will show calendar. User can see detailed date
information (shown as picture 7-3).
picture 7-3
7.3 Shortcut key
7.3.1 Calling
In picture 7-1, clicking
at the left bottom, it will show calling menu:
Frequent, My contacts, Call, Video message, Call setting.
7.3.1.1 Frequent
Clicking the right upper setting icon, it will show apartment door station (100199), villa door station (400-499), entrance door station (200-299),
management center (300-399), choose any device to add. For example, click
apartment door station (100-199), it will show as picture 7-5. It can set the
name of apartment door station, home address, IP address, then click OK.
Return to General page as picture 7-4, added successfully.
picture 7-4
picture 7-5
Note:
1. When the connection of added device is normal, it will show green tick.
2. When the connection of added device is abnormal or not connect, it will
show the red cross.
3. Choose villa door station or apartment door station and press, it can
monitor. Choose management center and press, it can call.
4. Press and hold on a device, it can modify the device name, home address
and IP address. It can also delete the device.
7.3.1.2 My contacts
Choose my contacts, it will show contacts list page. Click the right upper add
contacts icon, it will show as picture 7-7. Enter name, home address, IP
address and click “Add”. It will return to the page shown as picture 7-6, added
successfully. On the contacts list page, choose a contact and press, it can call.
When press and hold on, it can delete the contact and modify contact info.
picture 7-6
picture 7-7
7.3.1.3 Call
Call page includes 2 parts: call and call log.
Click Call or the right upper shortcut icon, it will show call page. It can enter
the contact’s home address and call the contacts in the same phrase and
area. For example, call the contact of Building 1, Unit 1, 1F, Room 1, No.1,
enter 1 Building(*)1Unit(#)010101, shown as picture 7-8.
picture 7-8
When enter the contact’s home address on call page, click
show as picture 7-9.
picture 7-9
The call log page is shown as picture 7-10.
to call, it will
picture 7-10
Note:
1.
: missed call
2.
: answered call
3.
: dialed call
Press and hold on a call log, it will show as picture 7-11.
picture 7-11
Note:
1. Call: call the one you like in the call log (only for touch panel and
management center). Click “Call”, it will call the contact.
2. Add contacts: choose the one you like to add as a contact (only for touch
panel). Click “Add as a contact”, it will add as a contact.
3. Blacklist: choose the one you like to add in blacklist (only for touch panel).
Click “Add in blacklist”, it will add in blacklist.
4. Delete: choose the one you like to delete. Click “Delete”, it will delete the
log.
5. Clear log: click “Clear log”, it will delete all call log in the current page.
7.3.1.4 Video message
It includes 2 parts: visitor and family, shown as picture 7-12.
picture 7-12
Note:
1. Unread/read: unread video message will show as unread. If read, it will
show as read.
2. Play video message: click a video message, it will play.
3. Stop video message: when playing the video message, click
, it will stop.
4. Record/stop: click
, it will record. When recording, click
, it will stop.
5. Clear message: press and hold on a message, it will show the prompt box.
Choose delete all, all message will be cleared.
6. Delete message: choose a message you like, click delete, it will show the
prompt box. When confirmed, it will be deleted.
7.3.1.5 Intercom setting
On this pate, it can set the mobile to intercom when touch panel is called. It’s
only for 3 mobiles. When choose “Whether to edit address manually”, it can
set the home address and save. “By download” refers to download related
info from community server software when touch panel connects to it. On this
page, it can also view the IP address, software version, SIP version and
community info, shown as picture 7-13.
picture 7-13
7.3.2 Home automation
Click
in the middle of picture 7-1, it will show semi-circular menu. The
outer ring is 8 scene controls (Scene 1, Scene 2, Scene 3, Scene 4, Scene 5,
Scene 6, All on, All off). Except all on and all off, the other scene controls can
be set by the user. The core is 4 icons to enter the room. Press and hold on
“Add”, it will show room list as picture 7-14.
picture 7-14
Click a scene control icon in the outer ring, it can do scene control.
Click the room icon in core, it can control the devices in the room, shown as
picture 7-15.
picture 7-15
Choose “Edit” in picture 7-15, press and hold on a device, it can remove the
device to DIY room. The background of DIY room can be set by the user,
shown as picture 7-16.
picture 7-16
7.3.3 Security alarm
Click
on the right of picture 7-1, it will show 4 security modes (Sleep, At
home, Go out, Disarm), shown as picture 7-17.
picture 7-17
8. Home pageⅠ
When on the first page, slide from the right to the left, it will enter home page
Ⅰ, shown as picture 8-1.
picture 8-1
8.1 Home automation
8.1.1 Combination control
Home pageⅠ→Home automation→Combination control (shown as picture 82).
picture 8-2
1. Add: (shown as picture 8-3) on combination control page, click “Add”, it will
enter add page. When filled the blank, click “OK”, it will return to the
previous menu. The added item will show in the name list of combination
control.
2. Modify: press and hold on the added combination control, it will show
prompt box. Click “Modify”, it will enter modify page. Modify the items and
click “OK”. It will save and return to the previous menu.
3. Delete: press and hold on the added combination control, it will show
prompt box. Click “Delete”, it will delete the item.
picture 8-3
Combine several single controls, and click “OK”, it will return to the previous
menu. Choose the added item and click “Start”, it will start (shown as picture
8-4).
picture 8-4
8.1.2 Timing control
Home pageⅠ→Home automation→Timing control (shown as picture 8-5).
picture 8-5
1. Add: (shown as picture 8-6) on timing control page, click “Add”, it will enter
add page. When filled the blank, click “OK”, it will return to the previous
menu. The added item will show in the name list of timing control.
2. Modify: press and hold on the added timing control, it will show the prompt
box. Click “Modify”, it will enter modify page. Modify the items and click
“OK”. It will save and return to the previous menu.
3. Delete: press and hold on the added timing control, it will show the prompt
box. Click “Delete”, it will delete the item.
picture 8-6
Lighting and infrared home appliances can be timing controlled by setting
on/off time, shown as picture 8-7.
picture 8-7
8.1.3 Temperature control (not ready)
Home pageⅠ→Home automation→Temperature control (shown as picture 88).
picture 8-8
1. Add: (shown as picture 8-9) on temperature control page, click “Add”, it will
enter add page. When filled the blank, click “OK”, it will return to the
previous menu. The added item will show in the name list of temperature
control.
2. Modify: press and hold on the added temperature control, it will show the
prompt box. Click “Modify”, it will enter modify page. Modify the items and
click “OK”. It will save and return to the previous menu.
3. Delete: press and hold on the added temperature control, it will show the
prompt box. Click “Delete”, it will delete the item.
picture 8-9
It can detect the temperature in the room, and adjust the working status of
home appliances, shown as picture 8-10.
picture 8-10
8.1.4 Linkage control
Home pageⅠ→Home automation→Linkage control (shown as picture 8-11).
picture 8-11
1. Add: (shown as picture 8-12) on linkage control page, click “Add”, it will
enter add page. When filled the blank, click “OK”, it will return to the
previous menu. The added item will show in the name list of linkage
control.
2. Modify: press and hold on the added linkage control, it will show the
prompt box. Click “Modify”, it will enter modify page. Modify the items and
click “OK”. It will save and return to the previous menu.
3. Delete: press and hold on the added linkage control, it will show the
prompt box. Click “Delete”, it will delete the item.
picture 8-12
For linkage control, it works with sensors. When sensors triggered, the system
can control devices (such as lighting, infrared home appliances) according to
the user’s setting, shown as picture 8-13.
picture 8-13
8.2 Instant messenger
Clicking Instant messenger, it will enter info/contacts page. Click right upper
“+”, it will show add contacts page. Enter the registered user name of mobile
app, and click “OK”. When login mobile app, the user will receive a request to
add as a contact. When agree to add, it will show the added touch panel. Now
the user can control it. The added contacts will show in the contacts list of
touch panel. When the contact is online, it is blue. If offline, it is grey, shown
as picture 8-14.
picture 8-14
It can choose any contact in the list to chat, shown as picture 8-15.
picture 8-15
Note:
1. When A login, if it wants to add B as a contact, no matter B is online or
offline, it is able to add.
2. When B is already a contact of A, A is able to send text, picture or voice
file to B, when B is offline. When B is online, it will get a prompt.
3. When B is already a contact of A, A and B both are online, they can send
text, picture and voice file to each other and there will be voice prompt.
4. When A would not like to add B as a contact, press and hold on B in the
contacts list, it will show the prompt box to confirm to delete. Click “OK”, it
will be deleted.
5. In the contacts list, press and hold on any contact, it can modify the name
or delete it.
8.3 Help
8.3.1 Device info
Home pageⅠ→Help→Device info.
On this page, it will show device ID, Ethernet IP, current WiFi IP, DIR
(software file name), touch panel system version, home automation software
version, shown as picture 8-16.
picture 8-16
8.3.2 Module status
Home pageⅠ→Help→Module status.
On this page, it will show the working status of zigbee module, security
module, RF module and wireless security module. If working normal, it will
show normal. If not connect or it is abnormal, it will show not available. When
connect with a module, click “Check”, it can check the current status of the
module, shown as picture 8-17.
picture 8-17
8.3.3 User help
Home pageⅠ→Help→User help.
User help will tell you how to do in each page. If it is your first time to use or
there is a problem, it is recommended to open the user help. In picture 8-18,
when tick, it will close user help. If not, the user help is on. The default status
of user help is on.
picture 8-18
8.4 Monitoring
Home pageⅠ→Monitoring (shown as picture 8-19).
picture 8-19
Note:
1. When touch panel and our IP camera connect to the same intranet, click
“Search in intranet”, it will show the IP camera in the same intranet.
2. When touch panel and our IP camera connect to internet, if want to
monitor via IP camera, click “Add manually”. Enter the name (e.g.
ipcamera00000021) and password (default password is 000000) on the
label of IP camera.
3. No matter search in intranet or add manually, it will show the added IP
camera as picture 8-19.
4. Click “View” in picture 8-19, it can monitor via the IP camera. Click “Delete”,
it can delete the added IP camera. Click “Setting”, it can show setting page
of IP camera as picture 8-20.
picture 8-20
Note:
1. Password: when add our IP camera, it need to enter password. The
default password is 000000.
2. WiFi SSD: it refers to the name of the WiFi which the IP camera connected
to.
3. WiFi password: it refers to the password of the WiFi which the IP camera
connected to.
4. Ethernet IP: when IP camera connects to Ethernet, it will show the
Ethernet IP address.
5. WiFi on/off: After setting WiFi SSD and password, it ought to turn on WiFi.
6. New password/enter the password again: it can modify the password of IP
camera. When enter a new password, click “Modify password” to confirm.
7. Update firmware: when IP camera connects to internet, click “Update
firmware”, it can upgrade IP camera remotely.
8.5 Repair
Home pageⅠ→Repair
On repair page, click right upper “+”, it can create a repair group, shown as
picture 8-21.
picture 8-21
Choose a repair group in the repair list, and communicate with community
management staff, shown as picture 8-22.
picture 8-22
Note:
1. Group chat can send text, picture and voice file.
2. Press and hold on chat log, it will show prompt box. Click “Delete”, it can
delete a certain piece of chat log.
3. Click the three white dots at the right upper of group chat page, it will show
group chat setting page as picture 8-23.
picture 8-23
Note:
1. Click “+” or “-” to add or delete the user in the group.
2. Click “Repair title”, it can modify the created repair title.
3. Click “My nickname in the group”, it can modify the nickname of group chat.
4. Click “Clear chat log” and confirm, it will clear chat log.
5. Click “Exit group chat” and confirm, it will exit and delete the repair group.
8.6 Service
Home pageⅠ→Service
On service page, click right upper “+”, it can create a service group, shown as
picture 8-24.
picture 8-24
Choose a group on service page, it can communicate with community
management staff, shown as picture 8-25.
picture 8-25
Note:
1. Group chat can send text, picture and voice file.
2. Press and hold on chat log, it will show prompt box. Click “Delete”, it can
delete a certain piece of chat log.
3. Click the three white dots at the right upper of group chat page, it will show
group chat setting page as picture 8-26.
picture 8-26
Note:
1. Click “+” or “-” to add or delete the user in the group.
2. Click “Service title”, it can modify the created service title.
3. Click “My nickname in the group”, it can modify the nickname of group chat.
4. Click “Clear chat log” and confirm, it will clear chat log.
5. Click “Exit group chat” and confirm, it will exit and delete the service group.
8.7 Advice
Home pageⅠ→Advice
On advice page, click right upper “+”, it can create an advice group, shown as
picture 8-27.
picture 8-27
Choose an advice group in the advice page, and communicate with
community management staff, shown as picture 8-28.
picture 8-28
Note:
1. Group chat can send text, picture and voice file.
2. Press and hold on chat log, it will show prompt box. Click “Delete”, it can
delete a certain piece of chat log.
3. Click the three white dots at the right upper of group chat page, it will show
group chat setting page as picture 8-29.
picture 8-29
Note:
1. Click “+” or “-” to add or delete the user in the group.
2. Click “Advice title”, it can modify the created advice title.
3. Click “My nickname in the group”, it can modify the nickname of group chat.
4. Click “Clear chat log” and confirm, it will clear chat log.
5. Click “Exit group chat” and confirm, it will exit and delete the advice group.
8.8 More
8.8.1 Room shortcut
Home pageⅠ→More→Room shortcut (shown as picture 8-30).
picture 8-30
Note:
1. Choose to enter any room, it can single control any device in the room.
2. Press and hold on any room icon, it can put the room icon on Home page
Ⅰ.
8.8.2 More shortcuts
Home pageⅠ→More→More shortcuts
More shortcuts includes: Home automation, Multimedia, Help, Call for elevator,
Repair, Instant messenger, Health, Monitoring, Service and Advice, shown as
picture 8-31.
picture 8-31
Note:
1. Click these shortcuts, it can show the page accordingly.
2. Press and hold on these shortcuts, it can put their icons on Home pageⅠ.
3. Call for elevator: to save time, it can help to call for elevator before leaving
home.
8.8.2.1 Multimedia
Multimedia: it can play the audio file in SD card. Play, Pause, Previous, Next,
Single cycle, All cycle and volume. Click change mode, it can view pictures
and play videos in SD card (shown as picture 8-32).
picture 8-32
8.8.2.2 Health
The software (Body composition monitor, Blood pressure/oxygen monitor and
Health on touch panel) connects and uploads data by Bluetooth. When health
software receives, it will show all exam results, and analyze the health status
(shown as picture 8-33).
picture 8-33
1. Blood pressure/oxygen: turn on Body composition monitor software, click
Blood pressure/oxygen, health software will turn on Bluetooth to connect
with the monitor automatically. To exam via monitor, data will upload to the
health software and show.
2. Fat/weight: turn on Body composition monitor software, click Fat/weight,
health software will turn on Bluetooth to connect with the monitor
automatically. To exam via monitor, data will upload to the health software
and show.
3. User management: click user management, it can add several users.
When added users, it can save exam data and analysis result.
4. Data management: click data management, it can view exam data and
analysis result of added users.
5. Result analysis: click result analysis, health software will analyze health
status according to the data uploaded by body composition monitor and
blood pressure/oxygen monitor. It can also make suggestions to improve
health status.
6. Current user: if it shows not login, it will not save data after exam. If need
to save exam result, click not login, choose the added user name to login
and exam.
9.Home pageⅡ
On the first page, slide from the right to the left twice, it will enter home page
Ⅱ, shown as picture 9-1.
picture 9-1
Note: press and hold on the right upper
Click “OK”, the system will reboot.
for 2s, it will show prompt box.
9.1 Basic setting
9.1.1 Network setting
Home pageⅡ→Basic setting→Network setting
On network setting page, click “QR code”. When touch panel scan the QR
code generated by community server software, it can get IP address of touch
panel, IP address of router, subnet mask, Alternate DNS, Preferred DNS and
the server IP address that uploads alarm snapshot image to. All the info
above can also be set manually, shown as picture 9-2.
picture 9-2
After scan QR code, when touch panel connects to internet, the cloud login
icon will be green. If not connected or failed, it will be red (shown as picture 93).
After scan QR code, touch panel connects to intranet, when run community
server software, if the community login successfully, the icon will be green. If not
connected or failed, it will be red (shown as picture 9-3).
picture 9-3
9.1.2 Home address
Home pageⅡ→Basic setting→Home address
When on network setting page scan the QR code, it can also generate home
address of touch panel. For details, please refer to 7.3.1.5 intercom setting.
9.2 Intercom setting
For details, please refer to 7.3.1.5 intercom setting.
9.3 Home automation setting
9.3.1 Room management
Home pageⅡ→Home automation setting→Room management (shown as
picture 9-4)
picture 9-4
Note:
1. Press and hold on a room, it will show the prompt box. Choose “Modify”, it
can modify the room. Choose “Delete”, it can delete the room.
2. Click the right upper “+”, it can add room, shown as picture 9-5.
picture 9-5
Note:
1. Click the blank of room name, it can name the added room. Click the
triangle, it can choose a name you like.
2. At the blank of room type, click the triangle, it can choose a room type you
like.
9.3.2 Sensor management
Home pageⅡ→Home automation setting→Sensor management (shown as
picture 9-6)
picture 9-6
Note:
1. Press and hold on a sensor, it will show the prompt box. Choose “Modify”,
it can modify the sensor. Choose “Delete”, it can delete the sensor.
2. Click the right upper “+”, enter sensor name, port no., room, snapshot, RIU,
alarm type, sensor type (wireless/wired, normal open/closed), shown as
picture 9-7.
picture 9-7
9.3.3 Device management
Home pageⅡ→Home automation setting→Device management (shown as
picture 9-8)
picture 9-8
Note:
1. Press and hold on a device, it will show the prompt box. Choose “Modify”,
it can modify the device. Choose “Delete”, it can delete the device.
2. Click the right upper “+”, it can add devices.
3. Click RIU management, it can add modules, shown as picture 9-9.
picture 9-9
9.3.4 PANID address
Home pageⅡ→Home automation setting→PANID (shown as picture 9-10)
PANID address is generated according to home address. When set home
address on touch panel, click “Generated by home address”, it will generate
PANID address. Click “Check”, it can view the generated new PANID address.
This address is used for creating zigbee network.
picture 9-10
9.4 Security setting
9.4.1 Alarm delay
Home pageⅡ→Security setting→Alarm delay
Choose the sensor you like, if would like to alarm delay, enter the time, shown
as picture 9-11.
picture 9-11
9.4.2 Security mode
Home pageⅡ→Security setting→Security mode (shown as picture 9-12)
Set the sensor whether to alarm in security mode: Go out, At home, Sleep
and 24 hours.
picture 9-12
9.4.3 Arm delay
Home pageⅡ→Security setting→Arm delay (shown as picture 9-13)
Set the time for arm delay (0-255s). It will arm after the time set.
picture 9-13
9.4.4 Alarm setting
Home pageⅡ→Security setting→Alarm setting (shown as picture 9-14)
1. Alarm lasting time: set the lasting time for alarm.
2. Set to alarm immediately or delay when sensors triggered.
3. Set the volume of alarm.
picture 9-14
9.5 Scene setting
Home pageⅡ→Scene setting (shown as picture 9-15)
Scene setting page includes: All on setting, All off setting, Scene 1 setting,
Scene 2 setting, Scene 3 setting, Scene 4 setting, Scene 5 setting, Scene 6
setting.
picture 9-15
9.5.1 All on/off setting
Home pageⅡ→Scene setting→All on/off setting (shown as picture 9-16)
When devices appear in the list of touch panel (there will be “Dingding”
sound), all on and all off mode is available. On this page, it can combine all
on/off, security mode and combination control to create a new scene.
When set, click “Test” to test the new scene.
picture 9-16
9.5.2 Scene setting
Home pageⅡ→Scene setting→Scene 1 setting (shown as picture 9-17)
On the left of scene setting page, choose the device to add in the scene. Set
the device status to be used in scene, and tick on the left. This can set the
scene for lighting control.
On this page, it can combine scene mode, security mode and combination
control to create a new scene.
When set, click “Test” to test the new scene.
picture 9-17
9.6 Preference setting
Home pageⅡ→Preference setting (shown as picture 9-18)
picture 9-18
Note:
1. Lightness: adjust the lightness of touch panel.
2. Standby: set the time to enter into standby mode. When in standby mode,
it can save energy.
3. Set background of first page: it can customize the background of first page.
4. Set font color of first page: there are 5 font colors: gold, white, yellow,
black and green.
5. Restore default style: restore the background and font color of first page to
factory default style.
9.7 System setting
9.7.1 Language setting
Home pageⅡ→System setting→Language setting
Now there are 3 languages: Simple Chinese, Traditional Chinese and English.
Click “Language setting”, it can set the language you like.
9.7.2 Input method
Home pageⅡ→System setting→Input method
Now there are 2 input methods: En (US) and Google pinyin. The default is
Google pinyin, shown as picture 9-19.
picture 9-19
9.7.3 Date/time
Home pageⅡ→System setting→Date/time
1. Click “Date/time”, it will show as picture 9-20. When touch panel connects
to internet, choose “Get date/time automatically” and “Get time zone
automatically”, it can get network time and time zone automatically.
2. Support 24 hours type and several date types.
picture 9-20
9.7.4 Password
Home pageⅡ→System setting→Password
Click “Password”, choose the system/engineering user to modify. Click
“Modify”, it will show password modify box as picture 9-21. Then enter the old
password, new password and enter the new password again.
picture 9-21
9.7.5 WiFi
Home pageⅡ→System setting→WiFi
Click “WiFi”, it will show as picture 9-22. It can turn on/off WiFi.
picture 9-22
9.7.6 Bluetooth
Home pageⅡ→System setting→Bluetooth
Click “Bluetooth”, it will show as picture 9-23. It can turn on/off Bluetooth.
picture 9-23
9.8 Maintain
The default password of maintain page is shown as picture 9-24.
picture 9-24
This page includes: Backup/restore, Application management, Elevator
setting, System update, System test and Auto test, shown as picture 9-25.
picture 9-25
10. Create zigbee network
10.1 Add zigbee module
1. Make sure the touch panel already installed built-in zigbee module.
2. Home pageⅡ→Home automation setting→Device management→RIU
management→Add (enter RIU name, choose RIU type as ZIGBEE, default
address code is 7)→Save (shown as picture 10-1)
picture 10-1
Note: the factory default setting is already added zigbee module. If deleted by
mistake, it can follow the steps above to add again.
3. Home pageⅠ→Help→Module status→zigbee shows as normal (shown as
picture 10-2)
picture 10-2
10.2 PANID address setting
Home pageⅡ→Home automation setting→PANID→PANID check→Show
PANID: 0905 (shown as picture 10-3)
picture 10-3
10.3 Input PANID address
After set PANID address, put zigbee remote controller near touch panel.
When remote controller adds into the network created by touch panel, the
Join PANID address of remote controller will be the same with touch panel.
Press SAVE on the remote controller to save this network. Click NEXT to
change to the next page, and click RESET to reboot remote controller. When
rebooted, put remote controller near smart switch (socket, curtain controller
and etc.). Remote controller will check that Join PANID of the smart switch
(socket, curtain controller and etc.) has changed, click NEXT, and then click
INPUT to input address saved by remote controller to smart switch (socket,
curtain controller and etc.). Smart switch indicator flashes 20s, press the
background indicator to confirm. When reboot smart switch, it will add into the
network. When the background indicator flashes three times, it means added
the network successfully. There will be “Dingding” sound from touch panel.
And
will appear on the right bottom of the page. Click the icon, it will show
new device list (shown as picture 10-4).
picture 10-4
Note:
1. Test: choose a device and click test, to check whether the device can be
controlled.
2. Add: when tested that the device can be controlled, add it into a room.
3. Delete: when tested that the device is unavailable, just delete it.
4. Close: After added, click close to return to the previous menu.
10.4 Zigbee home automation control
10.4.1 Single control
(Single control for smart switch, curtain controller, smart socket and
temperature module)
When added smart switch, curtain controller, smart socket and temperature
module to a room you like, it can single control them.
Click
→choose the room you like (shown as picture 10-5)
picture 10-5
10.4.2 Scene control
(Scene control for smart switch, curtain controller and socket)
Home pageⅡ→Scene setting→Click a scene and enter→Choose a device
and set the device to the status you like→Combine security alarm, scene and
combination control→Click test to test the scene (shown as picture 10-6)→
Click
, it will show semi-circular menu→Choose the scene to control
(shown as picture 10-7)
picture 10-6
picture 10-7
10.4.3 Infrared home appliances single control
When input address into zigbee/IR transceiver, press confirm key on the
transceiver, it will reboot. When the red indicator flashes three times, it means
added to the network successfully. Transceiver will add to the page of touch
panel automatically.
Click the transceiver and add to a room you like. When created a new room,
add TV, DVD, amplifier, air conditioner and music system. It can also
customize the name of infrared home appliances (shown as picture 10-8).
picture 10-8
Choose a device to enter its control page→Press and hold on RF key of
zigbee/IR transceiver until the red indicator is on→Click any key on control
page to code→When the blue indicator of transceiver flashes twice, it means
coding successfully (flashing four times means clearing code)→Press and
hold on IR key of transceiver until the red indicator is on→Put the related
remote controller in front of IR area of transceiver and press a key you like to
code until the blue indicator is on→Click the corresponding key on control
page to turn the blue indicator into red (repeat the steps to code several keys)
→When the red indicator is off, it means coding finished (shown as picture 109).
picture 10-9
10.5 Zigbee home automation code clearing
10.5.1 Single control code clearing
Single control code clearing of smart switch, curtain controller and socket:
Home pageⅡ→Home automation setting→Device management→Delete the
device you like to clear code
10.5.2 Scene control code clearing
Scene control code clearing of smart switch, curtain controller and socket:
Home pageⅡ→Home automation setting→Choose a scene→Uncheck the
device on the left
10.5.3 Infrared home appliances control code clearing
To clear all code, just clear code of zigbee/IR transceiver. To clear code of
single device, just delete the device.
10.6 Other
It can also timing control, linkage control, temperature control and
combination control by related setting (refer to 8.1 Home automation)
11. Community info
Community info page is included in the first page (shown as picture 11-1)
picture 11-1
1. Community info includes: Community info, Community notice, Bill and More
(need to install community server software in a computer of community
management office).
2. Community management office sends community info, community notice
and bill to the house owner. The owner can view and ask help from or advise
the community management office by repair, service and advice function.
3. If any community info is unread, there will be prompt on the home page
status bar.
4. It can send text, picture and voice file.
12. AppendixⅠRF Home automation control
12.1 Add RF module
1. Make sure the touch panel already installed RF module.
2. Home pageⅡ→Home automation setting→Device management→RIU
management→Add (enter RIU name, choose RIU type as RF, default address
code is 1-6)→Save (shown as picture 12-1)
picture 12-1
Note: the factory default setting is already added RF module. If deleted by
mistake, it can follow the steps above to add again.
4. Home pageⅠ→Help→Module status→RF shows as normal (shown as
picture 12-2)
picture 12-2
12.2 Add devices
Home pageⅡ→Home automation setting→Device management→Click “+”→
Choose the RIU needed→Device type→Room→Enter device name→OK
(shown as picture 12-3)
picture 12-3
12.3 Coding/control
12.3.1 Single coding/control
(Single control for smart switch, curtain controller and smart socket)
When added smart switch, curtain controller and smart socket to a room you
like, it can single control them.
Click
→choose the room you like (shown as picture 12-4)
picture 12-4
Note:
1. Single coding: press and hold on the key of the device you like until the
red indicator is on, choose ON or OFF on the related device page of touch
panel, the red indicator flashes twice and off automatically. It means
coding successfully.
2. Single control: when coding succeeds, it can control smart switch, curtain
controller and smart socket on the related page.
12.3.2 Scene coding/control
(Scene control for smart switch, curtain controller and socket)
Home pageⅡ→Scene setting→Click a scene→Coding for all on/all off of
smart switch first, to make sure all on/all off function is ok→Click coding start
→Choose a device, set it to the status you like→Click coding finish→when
tested ok, just exit from this page (shown as picture 12-5)→Click
, it will
show semi-circular menu→Choose the scene to control (shown as picture 126)
picture 12-5
picture 12-6
12.3.3 Infrared home appliances coding/control
When added infrared home appliances to a room you like, it can single control
them.
Click
→choose the room you like (shown as picture 12-7)
picture 12-7
Choose a device to enter its control page→Press and hold on RF key of
RF/IR transceiver until the red indicator is on→Click any key on control page
to code→When the blue indicator of transceiver flashes twice, it means
coding successfully (flashing four times means clearing code)→Press and
hold on IR key of transceiver until the red indicator is on→Put the related
remote controller in front of IR area of transceiver and press a key you like to
code until the blue indicator is on→Click the corresponding key on control
page to turn the blue indicator into red (repeat the steps to code several keys)
→When the red indicator is off, it means coding finished (shown as picture 128).
picture 12-8
12.4 Coding clearing
12.4.1 Single coding clearing
Press and hold on the key of the device you like until the red indicator is on,
choose the corresponding device on single control page, and click ON or OFF.
If the red indicator flashes twice, it means coding successfully. If flashing four
times, it means clearing code successfully.
12.4.2 Scene coding clearing
Click
, it will show semi-circular menu→Press and hold on the coded key of
the device until the red indicator is on, then click the scene coded with the key.
When the red indicator flashes four times, it means clearing code successfully.
12.4.3 Infrared home appliances coding clearing
Press and hold on the RF key of RF/IR transceiver until the red indicator is on.
Choose the coded infrared home appliance on single control page, and then
click any key on the page. When the red and blue indicator flashes four times,
it means clearing code successfully.
12.5
Other
It can also timing control, linkage control, temperature control and
combination control by related setting (refer to 8.1 Home automation)