Catalog - All Pages | Nexxus Lighting

Transcription

Catalog Volume 1.0
A1
S AV I ™ A R C H I T E C T U R A L L E D L I G H T I N G
SaVi SHO™ - Architectural Full Spectrum LED Fixture
SaVi SHO™ is an architectural
line
voltage,
Super
High
Output full spectrum (RGB) LED
floodlight with self contained
SAVI
auto switching power supply.
It features the world’s brightest
RGB LED lighting system utilizing
patented
laminated
ceramic
technology and a special heat
sinking system for superior life. It is
capable of 16 million colors and
is fully controllable by DMX. Color
effects include static colors, cross
fading, chasing and single color
rotation. The sealed housing is
constructed of cast aluminum
alloy.
SVI Product Catalog
Catalog Volume 1.1
T E C H N I C A L S P E C I F I C AT I O N S
SaVi SHO™
5.62”
142.87mm
13”
330.20mm
4.45”
113.13mm
4.86”
123.32mm
9.43”
239.64mm
9.85”
250.20mm
5.27”
133.80mm
SPECIFICATION FEATURES
Color Range: Different brightness of red,
green and blue combined to produce over
16 million colors.
Light Source: LTCC-M High density RGB
array
Beam Angle: 45°, 30°
Housing Material: Cast aluminum alloy
Current: 4A max
Wiring: Hard wire through bottom and side
conduit entrances
Wattage: 90W
Dimension: L330mm x W133mm x H240
(L13” x W5.3” x H4.5”)
Regular Working Voltage: AC90-264V
Fixture Spacing: 20' (6.095m)
Mounting: Easy to install back mounting
plate
Control System: DMX512
Warranty: 2 years
IP Rating: IP66
Lamp Life: 50,000 hours
Operating Temp: -4°F to 104°F (-20C to
40C)
pending
PHOTOMETRICS - 30˚ Optics
LED Lumen Output 1416
Max candela
652.5
Vertical beam angle
67.1˚
Horizontal beam angle
100.9˚
Vertical field angle
95.7˚
Horizontal field angle
113.1˚
Static Display: Capable of 16 million colors
Total Fixture Lumens
1202
Field Lumens
1202
Flashing Change: Color transition from high
brightness to low brightness
Beam Lumens
864.2
Total Fixture Efficiency
83.5%
Field Efficiency
83.5%
Beam Efficiency
60%
COLOR MODES
Cross Fade: Colors alternate
Color Chase: Colors chase one another
Auto Color Selection/Change: Colors rotate
automatically or are static without DMX applied
based on 10 preset selections.
ORDERING INFORMATION
MODEL
SaVi-SHO
Architectural Full Spectrum
RGB LED Fixture
OPTICS
30 - 30˚ Optics
45 - 45˚ Optics
FIXTURE COLOR
005 - Silver
004 - Black
003 - White
ACCESSORIES
02.6120 -DMX Signal
Amplifier/ Isolator
(Required for DMX signal splitting)
13.6203 -Top & Side Visor
13.6205 -2” Egg Crate Louver
* For more Lens Options, call factory
©2006 Super Vision International. All Rights Reserved
Catalog Volume 1.0
A3
SaVi Flood™ - Architectural Full Spectrum LED Fixture
SaVi Flood ™
is a line voltage free standing
full spectrum, red, green, and
blue (RGB) light emitting diode
SAVI
(LED) fixture with self contained
auto switching power supply. It is
capable of 16 million colors and
is fully controllable by DMX. Color
effects include static colors, cross
fade, chasing and single color
rotation. The sealed housing is
constructed of cast aluminum
alloy. The fixture is standard with
a clear flat glass and frosted soft
focus lens is included.
SVI Product Catalog
Catalog Volume 1.1
SaVi™ Flood
320mm
12.6”
225mm
10.04”
145mm
5.7”
architectural LED lighting
Color Range: Different brightness of red,
green and blue combined to produce over
16 million colors.
Housing Material: Cast aluminum alloy
Connector: Standard 3 pin XLR connector
Dimensions: L320mm x W145mmx H225mm
(L 12.6” x W5.7” x H10.04”)
Warranty: 2 years
Regular Working Voltage: AC90-264V
Light Source: High brightness LED’s
(consists of 360 LED’s)
Weight: 9lbs (4.1kg)
Regular Current: MAX3A
Lens: Clear flat glass with frosted soft focus
insert (standard)
Regular Wattage: 25W
Operating Temp: -4°F to 104°F
(-20C to 40C)
IP Rating: IP65
Beam Angle: 25°
Fixture Spacing: 10’ (3m)
Control System: DMX512
Warranty: 2 years
PHOTOMETRICS
0
90
629
0.0
22.5
45.0
67.5
90.0
1258
1888
45
COLOR MODES
2517
0
Static Display: Capable of 16 Million Colors
Flashing Change: Color Transition from
High Brightness to Low Brightness
Cross Fade: Colors Alternate
Color Chase: Colors Chase One Another
Auto Color Rotation : Colors rotate
automatically without DMX applied
MODEL
FIXTURE COLOR/VOLTAGE
ACCESSORIES
CABLES
SaVi-F:
Architectural Full Spectrum
RGB LED Fixture
004 - Black-120V
004-240: Black 240V
DMX Signal Amplifier/Isolator
17.1003 - 3 pin DMX cable - 3ft.
02.6120: 120V
17.1010 - 3 pin DMX cable - 10ft.
003 - White-120V
003-240: White 240V
(required for DMX signal splitting)
02.6240: 240V
17.1025 - 3 pin DMX cable - 25ft.
17.1050 - 3 pin DMX cable - 50ft.
17.1075 - 3 pin DMX cable - 75ft.
17.1100 - 3 pin DMX cable - 100ft.
Catalog Volume 1.0
A5
SaVi Spot - Versatile Full Spectrum RGB LED Fixture
SaVi
Spot™
is a high
lumen output above ground or
submersible LED lighting fixture.
It is the ideal fixture for both
indoor and outdoor applications
SAVI
that
require
full
color
mixing
capabilities such as fountains,
pools, landscape, theme parks,
exhibitions,
commercial
and
architectural applications. SaVi™
Spot has a protection rating of IP68.
Stainless (UL Listed) or aluminium
(CE Listed) construction meets
UL 676 or CE standards for fresh
water applications. SaVi™ Spot
utilizes proprietary triple water
proofing
technology
making
water intrusion virtually impossible.
SaVi™ Spot is available in various
beam angles, including 10°, 25°
(standard), 45°, 60°, and 90°. The
fixture can be controlled by any
DMX controller and is addressable
through the use of the SaVi™SC
Smart
separately)
SVI Product Catalog
Controller
(ordered
Catalog Volume 1.0
SaVi Spot™
255mm
10.04”
137mm
5.39”
180mm
7.08”
Color Combination:16.7 million colors at 24
bit RGB additive color mixing
Light Source:High Power Light Emitting
Diodes (LEDs)
Protective Rating: IP67
Weight: 7 lbs (3.1 kg)
Control System:DMX512
Available Housing Color: Black, White or
Stainless Steel
Cabling: Multi-core control/ data cable
Available Beam Angles: 10°, 25° (standard),
45°, 60°, 90°
Power Consumption:25 watts at 12 VDC
Submersion Depth: 1 meter (3 feet)
Housing: Stainless Steel - UL Version
Aluminium - CE Version
Temperature environment: -20°C to 40°C
(-4°F to 104°F )
Maximum Run Distance to Power Supply:
30’ UL Listed, 60’ CE Listed w/ junction box
Dimension:
255mm(W) x 220mm(D) x 245mm (H)
10.04”(W) x 8.66”(D) x 9.64”(H)
PHOTOMETRICS
Warranty: 2 years
Voltage Rated: 12 VDC
Power Consumption: 25W
COLOR
1 METER
3 METER
5 METER
TOTAL OUTPUT
POWER
EFFICACY
RED
351.1 Lux
39 Lux
13.5 Lux
93.7 Lux
9 Watts
10.4 lm/w
GREEN
614.3 Lux
68.5 Lux
25.2 Lux
163.5 Lux
9 Watts
18.2 lm/w
BLUE
271.0 Lux
29.7 Lux
11.2 Lux
72.3 Lux
9 Watts
8.0 lm/w
WHITE
1137.5 Lux
126.2 Lux
45.9 Lux
303.4 Lux
27 Watts
11.2 lm/w
* COLOR MODES
Fixed Color: Single static color display
Color Wash: Color change
Cross Change: Two color interchanging cycles
Random Change: Color changes in random orders
Fixed Color Strobe: A rapid strong flash of light in a single color
Variable Color Strobe: A sequence of color appears in a series of
strong flash in variable colors
* All Effects achieved through DMX programing
SaVi-S001
MODEL
BEAM ANGLE
ACCESSORIES
SaVi-S001: UL Listed Indoor/
Outdoor/Water Submersible RGB
LED Stainless Fixture
*10: 10º Beam Angle
25: 25º Beam Angle
SaVi-PS120-UL: UL Listed 120V power supply (1 per 6 SaVi™ Spots)
02.5000: Power Supply 120-240V (1 per six SaVi™ Spots)
14.5000: CE Listed Junction Box (1 per six SaVi™ Spots)
SaVi-SC120: Smart controller 120 volt
SaVi-SC240: Smart controller 240 volt
SaVi-S003: CE Listed White
Aluminium
SaVi-S004: CE Listed Black
Aluminium
*8-10 week lead time
(1 smart controller per system required)
Catalog Volume 1.1
A7
SaVi Accent™- Linear RGB LED Tube
SaVi Accent™
SaVi™ Accent RGB LED linear
lighting tube is a low voltage
SAVI
indoor (UL Listed) / Outdoor (CE
Listed) system. SaVi™ Accent tube
uses high brightness red, green,
and blue LED’s as its illumination
source. The 24V tube can be
controlled and powered by a
pre-programmed
stand
alone
controller that is DMX compatible.
The tube is constructed of durable
acrylic with 45 high power LEDs
per 14.76 inches.
SVI Product Catalog
Catalog Volume 1.1
SaVi Accent™
45mm
30mm
33mm
375mm
14.76”
1.77”
1.18”
1.3”
SaVi Accent 100
705mm
27”
45mm
1.77”
30mm
1.18”
33mm
1.3”
SaVi Accent 200
1035mm
40.75”
45mm
1.77”
30mm
1.18”
33mm
1.3”
SaVi Accent 300
Color Combination: std. 3 primary,
3 secondary, white, fades, strobes
Full 16 million color capability through DMX
Light Source:45 High Power Light Emitting
Diodes/FT (LEDs)
Protective Rating: IP64
Rated Power: 3.5W per foot
Rated Current: 0.29A per foot
Rated Voltage: 24VDC
Available Beam Angle: 85ºX40º
Luminance Flux: 21.3 lm
Construction:Clear Polycarbonate Tube
Temperature Range: -20°C to 40°C
-4ºF to 104ºF )
Max Connectable Units Per Controller:
24 units - Accent 100
Dimensions:
45mm(W) x 375 / 705 / 1035mm(L) x 45mm(H)
1.77”(W) x 14.76” / 27”/ 40.75”(L) x 1.77”(H)
Control System / Power Supply:
SaVi 181-24U
SaVi 181-120
SaVi 181-240
Weight: 0.44 lbs (0.2 kg)
Warranty: 2 years
Power Consumption:3.5W per foot
* STANDARD COLOR MODES
7
7
7
7
color change mode in sequence
color flash mode in sequence
color fade mode in sequence
color change mode in sequence
(mixing modes of jumping, flashing and fading)
Red, Green, Blue intensity adjustment
Color changing speed adjustment
DMX CONTROL MODES
Trigger standard color modes
Full 16 million color RGB color mixing through use with SaVi™ 512
software
A SaVi™ Smart Controller is required to address a Savi™ Accent
for DMX
MODEL
CONTROL / PS SYSTEM
ACCESSORIES
SaVi Accent 100
375mm (14.76”) length tube
SaVi Accent 200
705mm (27”) length tube
SaVi Accent 300:
1035mm (40.75”) length tube
SaVi Accent 100E: 240 Volt
SaVi181-24U UL Listed
120 Volt Controller
28.8006 Mounting Clips
SaVi181-120 CE Listed
120 Volt Controller
SaVi181-240 CE Listed
240 Volt Controller
Maximum number of units connected SaVi™ Accent 100 = 24 or 30’
OPTIONAL DMX
SMART CONTROLLER
SaVi-SC120: 120 Volt DMX
Extension Cables:
Smart Controller
17.4002 - 2ft. cable
17.4005 - 5ft. cable
SaVi-SC240: 240 Volt DMX
17.4010 - 10ft. cable
Smart Controller
17.4002-240 - 2ft. cable
17.4005-240 - 5ft. cable
17.4010-240 - 10ft. cable
16.6004 - 3 pin male adapter
16.6005 - 3 pin female adapter
16.6008 - Accent interface cable
for SavVi-SC120 & SaVi-Sc240
Catalog Volume 1.0
A9
SaVi Tube -Special Effect Full Spectrum LED Lighting Tube
SaVi Tube™ produces a vast
array of color effects using red,
green, and blue LEDs integrated
SAVI
with micro-electronic technology
and digital technology encased
in a high quality milky white
polycarbonate
tube
mounted
on an aluminum base. Lighting
effects include color chasing,
color fading, gray scale change,
flash
with
adjustable
speed,
and DMX capabilities for even
further flexibility. Includes a built
in
transformer
allowing
easy
installation without the need for
separate
SaVi™
power
Tube
components.
comes
with
an
independent DMX control system
with pre-program effects.
SVI Product Catalog
Catalog Volume 1.0
(2.9
5”)
SaVi Tube™
(39.37
”
(1.
97
”)
)
Color combination:
3 primary, 3 secondary, white
Light Source:
144 High Power Light Emitting Diodes
(LEDs)
Housing:
Polycarbonate tube with aluminum base
Protective Rating:
IP64
Control system (order separately):
Comes with proprietary DMX option
Order# : SaVi-TC120 - 120 volt
SaVi-TC240 - 240 volt
Cabling:
Multi-core control/ data cable + power cables
Tube Input:
120VAC or 240VAC
COLOR MODES & EFFECTS
Fixed Color: Single Static Color Display
(red, green, yellow, blue, purple, cyan, white)
Color Change: scrolls through all the static colors
Slow Flow 1: Single directional flow
Slow Flow 2: Bi-directional flow
Roll Chase 1: Rolling Backward and Forward
Roll Chase 2: Scan Backward and Forward
Multi Color: Rolling Backward and Forward
Fast Flow 1
Fast Flow 2
2 Color Chase
2 Color Flow
252 Gray Scale Color Change
DMX Addressable & DMX Trigger
Temperature Environment:
-4ºF to 104ºF (-20ºC to 40ºC)
Dimension:
1000mm(W) x 50mm(D) x 75mm(H)
39.37”(W) x 1.97”(D) x 2.95”(H)
Weight: 1.5kg (3.3 lbs)
Warranty: 2 years
RUN LENGTH SPECIFICATIONS
Indoor-UL: indoor/outdoor CE Version
Power Feed is Required every 60 tubes or 197 feet
Data-Signal Amplifiers are required every 60 tubes or 197 feet
600 tubes can be controlled by a single SaViTC controller
Outdoor UL listed Version:
Power must be fed to each tube
Data Signal Amplifiers are required every 60 tubes or 197 feet
600 tubes can be controlled by a single SaViTC controller
MODEL
SaVi-T120:
1m Special
Effects Full
Spectrum LED
SaVi-T240
SaVi-T120X:
UL Listed
Outdoors
POWER CABLES
DATA CABLES
CONTROL SYSTEM
ACCESSORIES
17.0701: 120V Power
Feed Cable
17.0701-240: 240V Power
Feed Cable
17.0702: 2ft. Data
17.0705: 5ft. Data
17.0710: 10ft. Data
SaVi-TC120:
120V Controller
Signal Amplifier
02.7120V: 120V every 60 tubes
02.7240: 240V every 60 tubes
Power Extension Cables
17.1702: 2ft. Length
17.1705: 5ft. Length
17.1710: 10ft. Length
SaVi-TC240:
240V Controller
DMX 3 pin adapter
16.6006: Male adapter
16.6007: Female adapter
Connectors
28.7304: 4 Way T power connector
28.7404: 4 Way Data connector
28.7302: T Data connector
28.7303: T Power connector
Catalog Volume 1.0
A 11
SaVi Step™ - LED Step Lighting System
SaVi
Step™
Safety
Step
lighting system - SL1000 is designed
SAVI
to light up the edges and/or
riser of a conventional step. The
illumination is made available by
Light Emitting Diodes (LEDs) that
have 50,000 to 100,000 hours of
lamp life (color dependent). The
Edge & Riser LEDs are available in
red, white, and blue. An optional
Step Light Row Indicators are
also available in numbers, letters,
and exit or handicap symbols.
These indicators can be added
to each end of the Step Light
and will illuminate in white. The
LED Step Light is manufactured
out of aluminum alloy with a non
skid/slip surface and is finished
with a black anodized coating for
durability and weather ability.
SVI Product Catalog
Catalog Volume 1.0
SaVi Step™
3.06”
(78mm)
1.37”
(35mm)
* Up to 8’ (2438mm) Maximum length
UL Listed: Low Voltage Luminaries for dry
locations only.
Power Supplies:
02.024V: 60 Watt
Operates 20 Feet (6m)
Dimensions: 3.06 (W) (78mm) x up to 1.37”
(35mm) H x 96” (2438mm) Maximum Lengh
Electrical Rating: 24VDC, 2.4 Watts per foot
Ambient Operating Temp: 32°F to 110°F
0°C to 43.3°C
EVPS150-24: 150 Watt
Operates 40 Feet (18m)
Weighjt: 1lb. per foot
EVPS320-24: 300 Watt
operates 85 Feet (26m)
Warranty: 2 year
MODEL
POWER
SL1000:
SaVi Safety Step
Lighting System
24 VDC
*Note: Use power
supplies listed above
STEP NOSE LED’S
POWER
Step Edge Light LED’s
R - Red LEDs
W - White LEDs
B - Blue LEDs
N - No LEDs
STEP RISER LED’s
R - Red LEDs
W - White LEDs
B - Blue LEDs
N - No LEDs
ROW IDENTIFIER
PLATES
OPTIONS
W - Wire Way
N - Number 1-100
L - Letter A-Z
H - Handicap
E - Exit
C - Custom
Catalog Volume 1.2
A 13
SaVi Flood Strip™ - LED Step Lighting System
SaVi Flood Strip™
The
SaVi™
Flood
Strip
light
with one line of high brightness
LEDs
or
is
designed
direct
for
lighting,
indirect
for
indoor
use only. Low voltage, flexible,
and
monochromatic,
LED
SAVI
strip
for
is
designed
illuminating
specifically
under
steps,
cabinets, coves, reveals, and strip
applications and has an excellent
tolerance
for
vibrations
and
shocks, quite different from neon
and other forms of fluorescent
lighting. Extremely low energy
consumption and works with low
voltage, thus minimizing the effects
of corrosion and electrolysis.
Outfitted with LED’s powered at
24VDC with a life expectancy of
up to 100,000 hours.
Ideal for direct lighting of steps,
walk-ways,
furniture,
coves,
kitchens, casinos, theme-parks,
restaurants, bars, hotels, signage
and much more.
SVI Product Catalog
Catalog Volume 1.2
SaVi Flood Strip™
Button Mount
0.72" (18.2mm)
Track Mount
0.6" (15.4mm)
Track Mount
Button Mount
Clear LED Housing
0.56" (14.3mm)
0.5" (12.7mm)
0.52" (13.3mm)
Button Dimension
0.5" (12.7mm)
Track Dimension
0.5" (12.7mm)
0.58" (15mm)
Installed Track Mount LED
0.71" (28mm)
Construction: Clear Polycarbonate Tube
.72” (18.2mm) Max Height x .71” (28mm) Max
Wide
Power Consumption: 1.7w Per Foot
Standard Voltage: 24VDC for White/Red/Blue
Track: Aluminium Anodized - Silver Color
View Angle: 120º
Button Mount: .5” x .5” (12.7mm x 12.7mm)
Included
Maximum Run Distance For Power Supply:
02.024V 60w=35’ (10.6mm)
EVPS150-24 150w=88’(26.8mm)
EVPS320-24 300w=176’ (56mm)
End Cap: One for end of bar
LED Angle: 90°
Printed Circut Board: Length 12” (304mm)
No. LED’s Per Foot: 18
Spacing .687” (17.4mm)
RATED FOR INDOOR USE ONLY
Color Temperature: 6000K
MODEL
FL-1000-B
10.0022: White LED Flood Strip
10.0023: Blue LED Flood Strip
10.0024: Red LED Flood Strip
MOUNTING
18.6621: 8’ Aluminium Track Section
18.6622: STD Button Mount
(2 per Ft. Included)
LENGTH
Specify in inches up to 96” or 2.44 meters
per section
Catalog Volume 1.0
A 15
SaVi -Control Systems
SaVi Keypad controller provides eight assignable buttons (1-8) and the
Next and Previous keys (+/-). This product was developed to allow end users
to have instant access to pre-assigned scenes, each scene having a limit of
1000 different steps.In addition to the eight assigned scenes, there are 247
other scenes available for playback. These then are accessible through the
next/ previous buttons, or can be set to run sequentially with an accuracy of
4 hundredths of a second. This product fits into any single or double gang
SAVI
(US) standard electrical box.
SaVi-512 Stand Alone Controller
The SAVI-512 STAND ALONE CONTROLLER, is a fully functional DMX Control and
software system that allow you to create custom lighting scenes, shows, or
effects. USB or ethernet interface is specifically equipped with memory which
allows it to work in Stand Alone mode in case of PC-failure or restricted use. In
Stand Alone mode the SAVI-512 STAND ALONE CONTROLLER is equipped with
a connector which allows it to be externally-powered (120VAC to 9.015Vdc, @ 600mA or 240VAC to 9.0-15VDC, @ 600mA). In Stand
Alone mode, the interface can release up to 255 scenes
which will be called back in numerical order by pressing
“Previous” or “Next”. Each of these scenes can have up
to 1000 steps. Individual scenes can be assigned to a
particular Play-back/ Recall button, 1-8. Due to its very
competitive price and its remarkable performance and
mini-size, this product is ideally suited for small or largescale settings including stores, restaurants, hotels, clubs,
architectural lighting, parks or exhibitions.
SVI Product Catalog
Catalog Volume 1.0
SaVi Key Pad/
Stand Alone Controller
1
2
3
4
5
6
7
8
-
+
SaVi Key Pad and
512 Controller System
(key pad NOT sold seperately)
MODEL
SaViKeyPad-L - 120 volt (includes SaVi 512-EL - Stand Alone
Controller / Software and Controller Cable) - USB
SaViKeyPad-H - 240 volt (includes SaVi 512-EH - Stand Alone
Controller / Software Controller Cable)
SaViKeyPad-EL - Ethernet Version
SaViKeyPad-EH - Ethernet Version
71.5mm
2.8”
115mm
4.5”
153mm
6”
SaVi Stand Alone Controller
MODEL
SaVi-512-L Stand Alone DMX Controller: 120 volt: USB port
SaVi-512-H Stand Alone DMX Controller: 240 volt: USB port
SaVi-512-EL Stand Alone DMX Controller: 120 volt: Ethernet
SaVi-512-EH Stand Alone DMX Controller: 240 volt: Ethernet
ACCESSORIES
10.0610: SaVi key pad-10 button
17.6000: SaVi key pad control cable -12 conductor- 20’ length
16.6000: 5-pin male & 3-pin female adapter
16.6001: 3-pin male & 5-pin female adapter
17.6100: USB AB 3’ cable
Catalog Volume 1.0
A 17
SaVi Rack Mount™ - Control System
SaVi Rack Mount™
SaVi Rack Mount is an equipment
room
ready,
rack
mounted
SAVI
version of our SaVi512 controller
and
offers
the
same
great
features, plus additional built in
features
including
an
internal
keypad to select scenes/shows,
and built-in LED readout that
flashes to indicate what scene is
in operation.
SVI Product Catalog
Catalog Volume 1.0
SaVi 512 Rack Mount™
19”
(483mm)
6.5”
(165mm)
1.75”
(45mm)
Power: 120 or 240 VAC, 50-60 Hz 25 watts
maximum
UL listed Class 2 power adapter
Dimensions: 1.75” x 19” x 6.5”
(45mm x 483mm x 165mm)
Operating Temperature: 0 - 35˚C (32-100˚F)
0-90% relative humidity, non-condensing
Front Panel: Power LED
Acknowledge (ACK) LED
Error LED
Serial Activity LED
8 Push buttons
Rear Panel: Programming Port DB-9M
1 Serial Port DB-9M
Discrete Inputs DB-37F
Power Barrel Connector
Show Memory: 32 Kbyte EEPROM.
Nonvolatile, robust memory retains show
data permanently with no battery backup
required.
Serial Port: RS-232C
300 baud - 38.4 kbaud
7, 8 or 9 Data Bits
1 or 2 Stop Bits
All parity types
Inputs: (16) TTL inputs, internally pulled up
to +5 VDC, suitable for contact-closure
operation. Trigger latency <1 frame.
MODEL
SaVi Rack Mount DMX Controller: 240 volt - USB port
SaVi512-RM: 120 volt - USB port
Catalog Volume 1.0
A 19
SaVi DMX Machine
SaVi DMX Machine
DMX Machine
is
a
complete
SAVI
stand-alone
lighting
controller.
It is ideal as a slave to another
controller, or can be used by
itself for small shows or elaborate
kiosks. Can be used to control any
DMX 512 compatible fixture/light
sources.
SVI Product Catalog
Catalog Volume 1.0
SHO™
DMX SaVi
Machine
EXTERIOR FRONT
EXTERIOR BACK
EXTERIOR FRONT
EXTERIOR BACK
Power:
• 120 or 240 VAC, 50-60 Hz
• 25 watts maximum
• UL listed Class 2 power adapter
Dimensions:
• 1.75” x 19” x 6.5”
(45mm x 483mm x 165mm)
Operating Temperature:
• 0 - 35°C (32 - 100°F)
• 0 - 90% relative humidity,
non-condensing
Front Panel:
• Power LED
• Acknowledge (ACK) LED
• Error LED
• Serial Activity LED
• 8 Push buttons
Rear Panel:
• Programming Port DB-9M
• 1 Serial Port DB-9M
• Discrete Inputs DB-37F
• Power Barrel Connector
Serial Port:
• RS-232C
• 300 baud - 38.4 kbaud
• 7, 8 or 9 Data Bits
• 1 or 2 Stop Bits
• All parity types
Inputs:
• (16) TTL inputs, internally pulled up to +5 VDC, suitable for contact-closure operation. Trigger latency <1 frame.
Show Memory:
• 32 Kbyte EEPROM. Nonvolatile, robust memory retains show data permanently with no battery backup required.
DMX Machine
Assessories
17.0193
18.0183
18.9001
18.0182
CF-1/4W-121JTR
10.0651
10.0650
DMX Data Cable “Sold by the Foot”
Replacement Screw 4-40 x .1875” (4.8mm) socket cap screw S/S
Replacement Screw 4-40 x .5” (13mm) socket cap screw S/S
DMX Tool for Socket Cap Screw
Terminating Resistor 120 Ohm
Replacement DMX Stepper Motor 6-wire
DMX board
Catalog Volume 1.0
A 21
SaVi Console™
SaVi Console™
SaVi-Console is one of the most
complete universal console DMX
SAVI
controllers available. A unique
override
button
allows
you
complete control of selectable
units. Here’s how it works: Play
back your show and select the
fixture(s) by pushing the override
button. When you disengage
the button, the unit(s) will join the
show again.
SaVi Console also comes with a
fog button to operate non-DMX
foggers. This all-inclusive unit stores
240 scenes in 30 banks utilizing a
maximum of 192 DMX-channels.
It is Midi compatible and features
sound-activation, tap sync, auto
run, and a polarity selector for
older units. You’ve now found
your savviest ally!
SVI Product Catalog
Catalog Volume 1.0
SaVi Console™
483mm
19”
133mm
8.4”
AUDIO
MIDI IN
DMX OUT
1 - Ground
2 - Data3 - Data+
1 - Ground
2 - Data+
3 - Data-
DMX OUT DMX IN
DC INPUT
POWER
FOG
ON
CONTROL OUT
OFF
AUDIO
MIDI IN
DMX OUT
1 - Ground
2 - Data3 - Data+
1 - Ground
2 - Data+
3 - Data-
DMX OUT DMX IN
DC INPUT
POWER
FOG
ON
CONTROL OUT
OFF
AUDIO
MIDI IN
DMX OUT
1 - Ground
2 - Data3 - Data+
1 - Ground
2 - Data+
3 - Data-
DMX OUT DMX IN
DC INPUT
POWER
FOG
ON
CONTROL OUT
OFF
63.5mm
2.5”
127mm
5”
Power: 120 or 240 VAC, 50-60 Hz 25 watts
maximum
UL listed Class 2 power adapter
Dimensions: 1.75” x 19” x 6.5”
(45mm x 483mm x 165mm)
Operating Temperature: 0 - 35˚C (32-100˚F)
0-90% relative humidity, non-condensing
Front Panel: Power LED
Acknowledge (ACK) LED
Error LED
Serial Activity LED
8 Push buttons
Rear Panel: Programming Port DB-9M
1 Serial Port DB-9M
Discrete Inputs DB-37F
Power Barrel Connector
Show Memory: 32 Kbyte EEPROM.
Nonvolatile, robust memory retains show
data permanently with no battery backup
required.
Serial Port: RS-232C
300 baud - 38.4 kbaud
7, 8 or 9 Data Bits
1 or 2 Stop Bits
All parity types
Inputs: (16) TTL inputs, internally pulled up
to +5 VDC, suitable for contact-closure
operation. Trigger latency <1 frame.
MODEL
SaVi-192-120: Stand Alone DMX Controller - 120 volt - USB port
SaVi-192-240: Stand Alone DMX Controller - 240 volt - USB port
02.1120:- Replacement Transformer - 120 volt
02.0240: Replacement Transformer - 240 volt
Catalog Volume 1.1
A 23
SaVi Underwater Lighting
SaVi Underwater Lighting
The new SaVi line of underwater
products
use
Proprietary
TRUECOLOR™ Technology for the
SAVI
cleanest light, purest colors. It’s the
brightest way to light your water
features or fountain. The SaVi Pool
and Spa Lights feature 9 exciting
Color Modes: 5 beautiful static
colors and 4 exciting shows which
can all be controlled through the
flip of a switch. The SaVi Pool Light
and the SaVi Spa light both fit spa
niches. A retrofit plate is available
for standard size pool niches.
There are no moving parts and no
maintenance is required. Award
Winning LED lighting Technology
from Super Vision International,
the brightest in World!
Note: This product is designed for
underwater use only.
SVI Product Catalog
Catalog Volume 1.2
5.2” (132mm)
4.3” (110mm)
SaVi Underwater
Lights
6.97” (177mm)
6.26” (159mm)
4.3” (110mm)
12V SaVi POOL & SPA FIXTURE
6.26” (159mm)
120V SaVi POOL & SPA FIXTURE
Light Source:
LTCC-M (Low Temperature Co-Fired Ceramic on Metal)
High Density RGB Array
Materials:
Metal: Corrosion resistant Stainless steel
Plastic: High chemical resistance,
and flame retardant
Lens:
Tempered Glass
Wiring:
Standard 50’ or 100’ cable
hard wired into junction box
Control System:
Internal microprocessor electronics
MODEL
SaVi-PL-12-50
SaVi-PL-12-100
DESCRIPTION
Pool Light - 12V / 50ft cord
SaVi-PL-120-50
SaVi-PL-120-100
SaVi-SL-12-50
SaVi-SL-12-100
Spa Light - 12V / 50ft cord
SaVi-SL-12-50
SaVi-SL-12-100
Input Voltage:
12 VAC 60Hz, 120VAC 60Hz
Wattage:
12V Spa Light 28W Max
12V Pool Light 110W Max
120V Spa Light 40W Max
120V Pool Light 145W Max
Weight:
12V 50ft cord Pool & Spa Light - 6lbs
12V 100ft cord Pool & Spa Light - 9.5lbs
120V 50ft cord Pool & Spa Light - 11lbs
120V 100ft cord Pool & Spa Light - 14.5lbs
Warranty: 2 years
Control System:
12V Spa Light 2.4A Max
12V Pool Light 9.0A Max
120V Spa Light .35A Max
120V Pool Light 1.25A Max
Optical Angle: 120 Degrees
IP Rating: IP68
ACCESSORIES
Beauty Plate Covers &
Replacements for SaVi
Pool or Spa Light
Adaptor for
Pool Niche
Part Numbers: SaVi-Plate-W
(above)
SaVi-Plate-B (black) not shown
White Beauty Plate (included)
Part Number:SaVi-BP-W
Chrome Beauty Plate
Part Number:SaVi-BP-C
(purchase separately)
Black Beauty Plate
Part Number: SaVi-BP-B
(purchase separately)
Catalog Volume 1.0
LED
LIGHTING
Catalog Volume 1.0
L E D L ighting
B
LED TECHNOLOGY
Th e fe a t u re s a n d b e n e fi t s o f L E D t e c h n o l o g y ;
d u ra b i l i t y, l o n g l a m p l i fe , c o m p a c t fi x t u re
d e s i g n a n d l o w e n e rg y re q u i re m e n t s a l l m a k e
fo r a n e x c e l l e n t c h o i c e fo r s i g n l i g h t i n g ,
building perimeter lighting and pool & spa
l i g h t i n g a s w e l l a s m a ny a rc h i t e c t u ra l l i g h t i n g
applications.
Catalog Volume 1.0
B2
LED LIGHTING
FLEXMOD™
FLEXMOD™
5 VDC Flexible LED module system
for lighting large channel letters,
signage and coves.
FLEXMOD
Open channel letter ready
• waterproof and corrosion
resistant
• Sold by the Foot (2 Modules per
foot)
SVI Product Catalog
Catalog Volume 1.1
B
LED Lighting
T E C HNI C A L S P E C I F I C ATI O N S
B
FLEXMOD™
2.440
(62mm)
1.550
(39.40mm)
1.350
(34.40mm)
0.660
16.67mm
2.440
(62mm)
M O N O C H R O M E
Features:
Easy to install flexible modules-shipped in rolls per requirements
Water-proof and corrosion resistance
Standards:
UL/cUL (tested to UL48)
IP65 rated
Module Voltage: 5VDC
Modules can be cut to length in the field
LED Type: High power 350mA
High brightness LED
Cable Wiring Gague: #14Awg standard
IP 65- Wet outdoor location
Optical Data: 120° beam spread
Environmental Specs: (-65°F to 130°F (-53°C to 54°C), 0-100%
humidity
The Flex-MOD system:
The Flex-MOD LED's - two modules per foot
Colors: white, warm white, red, orange, amber, blue, and green
5V 50W 120/240 power supply
Dimensions: 1.35” x 1.55” x 0.04”H
(34.4mm x 39.4mm x 15.33mm)
Easy installation with adhesive back or screw mount
2.44” Overall Width
Energy Efficient:
2.4 watts per foot
With standard 50 watt power supply: 26 modules
2 runs of 13 modules
* maximum distance from power supply to first module:
50 feet (15m)
ROLL LENGTH
FLEXMOD
FLEX-MOD-W
FLEX-MOD-WW
FLEX-MOD-R
FLEX-MOD-O
FLEX-MOD-A
FLEX-MOD-B
FLEX-MOD-G
02.050W
Cool White
Warm White
Red
Orange
Amber
Blue
Green
50W, 5V Power Supply
Available by the foot
(2 modules per foot)
Catalog Volume 1.0
B4
LED LIGHTING
FLEXLED™ White
FlexLed™ (white)
FlexLed™ 12”
12 VDC Flexbile
LED strip for signage applications,
reverse and front lit channel
letters, cove lighting, and display
FLEXLED
White
cases.
SVI Product Catalog
Catalog Volume 1.1
B
FLEXLED White™
.52”
13.1mm
FXCLIP2 - TOP
VIEW
.52”
13.1mm
FXCLIP2 MOUNTING CLIP
11.81
300mm
FXCLIP2 - SIDE VIEW
.57”
14.41mm
White : 18 LEDs
.52”
13.1mm
0.7"
17.76mm
.08”
2mm
FlexLED strip
FX clip
White : 24 LEDs
The Original
Features:
• Connect strips together via jumper cables
• 4 jumper sockets per strip for easy connection to other FLEXLED strips
• The FLEXLED strips can easily be cut in the field.
• Bend radius: 1.5" (38mm)
Energy Efficient:
• One 12" (305mm) strip uses:
- 3.2 watts per foot for 24 LEDs
- 2.4 watts per foot for 18 LEDs
• Maximum distance from power supply to FLEXLED strip is 30 feet
(9.1m)
• Power supplies are available in a range from 60 to 300 watts.
Benefits:
• Highest Performance
• Optically Superior
• Smallest Size
• Higher Reliability
• Improved Thermal Performance
- EDS Protected with a built in Zener Diode
- Flip chip technology so there is no wire-bond to fail. Flip-chip packaging is clearly superior to that of conventional wire-bond
- Thicker and more even phosphor distribution for better color consistency - Better angle consistency
- This 4mm LED Package was designed for illumination applications
The FLEXLED system:
• The FLEXLED strip - available in 1 foot segments
• 12V power supply - available in a full range if wattage
• Power/Jumper cables to connect the strips together without solder
• Mounting clips for easy installation
Standards:
• UL/ cUL/ ETL (tested to UL48)
• Must be used with a UL approved Class 2 power supply
• Maximum Current Per PCB for White - 260mA per strip
• Number of LEDs per strip - 24 or 18
PCB Length: 12" (305mm)
Input-Voltage: 12VDC
Connector Power Rating: 3A
LED type: InGan (White) high flux
PCB material: UL 94-V0 FR-4 G10 Fiberglass
LED spacing: 24 LED - 0.5"(13mm), 18 LED - 0.67"(17mm)
PCB width: 0.4" (10mm)
PCB thickness:0.037" (0.94mm)
Cable: FXPC
Cable wiring gauge: #22Awg standard
Optical data: 90˚ beam spread Envionmental specs: -65˚F to 130˚F, 0 - 100% humidity (no direct rain)
FLEXLED strip
10.0309-AO: Cool white (6500K) 12” - 24 LEDs
10.0309-6: Warm white (5700K) 12” - 24 LEDs
10.0310-AO: Cool White (6500K) 12” - 18 LEDs
10.0310-6: Warm White (5700K) 12” - 18 LEDs
mounting clip
FXCLIP2: mounting clip (30 per bag)
JUMPER CABLES
FXPC1 - 1”
FXPC4 - 4”
FXPC8 - 8”
FXPC12 - 12”
FXPC48 - 48”
FXPC120 - 120”
Catalog Volume 1.1
B6
LED LIGHTING
FLEXLED™ Color
FlexLed™ (color)
12VDC Flexbile LED strip for cove
lighting, display cases, channel
letters and signage.
FLEXLED
Color
SVI Product Catalog
Catalog Volume 1.1
B
FLEXLED™ Color
The Original
Features:
• Connect strips together via jumper cables
• 4 jumper sockets per strip for easy connection to other FLEXLED strips
• The FLEXLED strips can easily be cut in the field.
• Bend radius: 1.5" (38mm)
The
•
•
•
•
FLEXLED system:
The FLEXLED strip - available in 1 foot segments and 6 colors
12V power supply - available in a full range of wattages
Power/Jumper cables to connect the strips together without solder
Mounting clips for easy installation
Energy Efficient:
• One 12" (305mm) strip uses 1.5 to 1.8 watts per foot depending on
color for deep red, clear red, amber, and orange.
3.2 watts per foot for green, blue
- Maximum distance from power supply to FLEXLED strip is 30 feet (9.1m)
- Power supplies are available in a range from 60 to 300 watts.
Standards:
UL/ cUL/ ETL (tested to UL48)
Must be used with a UL approved Class 2 power supply
.52”
13.1mm
Maximum Current Per PCB for Green, Blue: 260mA per strip
Maximum Current Per PCB for Clear Red,
Deep Red, Orange, Amber: 180mA per strip
Number of LEDs per strip: 18 - Clear Red 24 - Green, Blue 25 Deep Red, Orange, Amber
PCB Length: 12" (305mm)
Input-Voltage: 12VDC
Connector Power Rating: 3A
LED type: AllnGap (Deep Red, Clear Red, Orange, Amber) high flux InGan (Green, Blue) high flux
PCB material: UL 94-V0 FR-4 G10 Fiberglass
LED spacing: 0.5"(13mm) for 24 LED - Green, blue
0.47" (12mm) for 25 LED - Deep Red, Orange, Amber 0.67" (17mm) for
18 LED - Clear Red
PCB width: 0.4" (10mm)
PCB thickness: 0.037" (0.94mm)
Cable: FXPC
Cable wiring gauge: #22Awg standard
Optical data: 100˚ beam spread Envionmental specs: -65˚F to 130˚F, 0 - 100% humidity (no direct rain)
.78”
(19.89 mm)
.52”
13.1mm
Clear Red : 18 LEDs
.36”
(9.3 mm)
FXCLIP2 - TOP VIEW
Blue , Green : 24 LEDs
.57”
14.41mm
.28”
(7.17 mm)
.08”
2mm
.52”
13.1mm
FXCLIP2 - SIDE VIEW
FXCLIP2 MOUNTING CLIP
FLEXLED strip
10.0300
10.0301
10.0302
10.0303
10.0304
10.0306
red 12” clear red 12”
amber 12”
blue 12” green 12”
orange 12”
SV Product Catalog
.69”
(17.5 mm)
12”
(304.8 mm)
Amber, Deep Red, Orange :
25 LEDs
*Note : Dimensions typical for all FlexLED™ color strips
mounting clip
JUMPER CABLES
FXCLIP2
mounting clip
30 per bag
FXPC1 - 1”
FXPC4 - 4”
FXPC8 - 8”
FXPC12 - 12”
FXPC48 - 48”
FXPC120 - 120”
Catalog Volume 1.0
B8
LED LIGHTING
BORDER
LIGHT
Border Light™
Border Light is a neon alternative,
low
voltage,
monochromatic,
LED tube designed specifically
for building perimeter lighting or
linear lighting applications.
LEDs produce very little heat
and
have
expectancy.
SVI Product Catalog
a
long
lamp
life
Catalog Volume 1.0
BorderLight™
BORDER LIGHT
R .49”
12.5mm
.59”
15mm
BORDER LIGHT TRACK
BORDER LIGHT TUBE
Energy Efficient:
One 12” (305mm) red segment uses 1.5 watts per foot for red, clear
red, amber and orange.
3.2 watts per foot for white, green, and blue.
Maximum distance from power supply to first tube is 30 feet (9.1 m).
Power supplies are available in a range from 25 to 300 watts.
UL file No. E220835
Construction:
Tube : Acrylic DR™ - UV resistant, extremely durable
Track : Acrylic DR™ - UV resistant, extremely durable
* For non-illuminated border light - please contact factory for quote.
ASSEMBLY:
SVBL4-RED
SVBL8-RED
SVBL4-BLUE
SVBL8-BLUE
SVBL4-GREEN
SVBL8-GREEN
SVBL4-WHITE
SVBL8-WHITE
SVBL4-ORANGE
SVBL8-ORANGE
SVBL4-AMBER
SVBL8-AMBER
SVBL4-YELLOW
SVBL8-YELLOW
POWER SUPPLY:
Red
Red
Blue
Blue
Green
Green
White
White
Orange
Orange
Amber
Amber
Yellow
Yellow
4Ft
8Ft
4Ft.
8Ft.
4Ft.
8Ft.
4Ft.
8Ft.
4Ft.
8Ft.
4Ft.
8Ft
4Ft.
8Ft
EVPS25- UL: 12VDC, 25 Watt
power supply, UL Listed
EVPS60-12-UL: 12VDC,UL 60 W
Class 2 UL
LED power supply
JUMPER CABLES
17.0451
17.0453
17.0454
17.0455
3” molex jumper cable 22AWG
3’ molex jumper cable 20AWG
EVPS60:12VDC, 60 Watt
power supply, ETL Listed
EVPS150: 12VDC, 150 Watt
EVPS320: 12VDC, 300 Watt
Catalog Volume 1.0
LED
POWER SUPPLIES & DIMMERS
SV Product Catalog
Catalog Volume 1.0
B 11
EVPS25
77mm
3”
34mm
1.34”
83mm
3.27”
83mm
3.27”
DESCRIPTION
LED Electronic Driver:
• Square housing, Compact size
• Reliability
• Meets UL, CSA, FCC application requirements
• DC constant voltage output
• Power efficiency
Features:
• UL Class 2
• Damp location rated
• Small, compact size
• Inherent short circuit protection
• Extreme low temperature performance (-40C)
• Tightly regulated output (1% line, 5% load)
• High power factor
Benefits:
• Limited output voltage and current plus isolation for safe operation
• Suitable for use in self-contained signs and raceways
• Facilitates use in self-contained signs for the simplest and most economical final installation
• Added safety without any troublesome fuses
• Allows use in any outdoor application
• Consistent light output regardless of line and load levels
• Minimizes amperage draw to reduce the number of power feeds required
• Peace of mind for your sign from the industries most trusted component maker
Input:
• AC input - WAGO 2-pin wire trap, 18 AWG solid or tinned standardwire, Line (Black), Neutral (White)
• Volts (60 Hz) - 120+/- 10%
• Power max (W) - 21.5
• Current Max (A) - 0.20
Output:
• 12VDC output - WAGO 4-pin wire trap, 20AWG solid or tinne standard wire, Positive (Red), Negative (Blue)
• Power Min (W) - 2.3
• Power max (W) - 25.5
• Current Max (A) - 2.1
Max Allowable Case temp.: 85˚C
Weight: 0.32 lbs
MODEL
EVPS25
25W - 12VDC ETL Listed Power Supply - 1 year warranty
EVPS25-UL
25W 12VDC UL Class B Power Supply - 5 year warranty
Catalog Volume 1.1
B 12
C HNI
LT EE D
L i gC
hA
t Li nSgP E C I F I C ATI O N S
LED Lighting
EVPS60
48.26mm
1.9”
228.6mm
9”
254mm
10”
76.2mm
3”
DESCRIPTION
LED Electronic Driver
The EVPS60 series power supplies are designed to provide complete outdoor/indoor installation ready DC power for all your LED lighting applications.
One of the most important benefits of LED lighting technology is its energy efficiency. However, in order for an LED lighting system to provide the greatest
efficiency and reliability, the power source, the lifeblood of the LED, must also be energy efficient. The EVPS60 power supply series is designed with
the latest in switched-mode technology, which increase the LED lighting systems energy efficiency and reliability.
Features
Electronical Features
• Highly efficient switched-mode technology
• Universal AC input, 120/240VAC operation
• Automatic Constant-voltage/ Constant current operation (CV/CC)
• User adjustable voltage and current
• Very low LED peak/ noise current - 1 % Max
Mechanical Features
• NEMA 3 design for indoor or outdoor installations
• Terminal Screw or Conduit entry versions
• Light and compact package
Reliability/ Warranty/ Compliance
• MTBF 55,000 hours
• Wide operating temperature range - -20 to 70˚C
• Meets all agency requirements - Class 2 UL/CUL, FCC
Benefits
• Highly energy efficient - complements LED efficiency
• 120/ 240 VAC operation reduces invetory and cost
• CV/CC operation reduces inventory and cost
• Allows easy adjustment of LED brightness
• Low LED noise current reduces LED stress
• Immediate savings on installation and hardware costs
• Does not require additional J-box/ enclosure
• Easy and quick installation and/ or removal
MODEL
EVPS60: 60 Watt - 12VDC ETL Listed Power Supply - 1 year warranty
EVPS60-12-UL: 12VDC UL Listed Power Supply - 5 year warranty
SVI Product Catalog
•
•
•
•
•
Provide low cost and simple expansion to higher power levels for large LED lighting systems
Light and compact package installs anywhere
Long life complements LED life expectancy
Dependable operation in extreme environments
Important to overall LED lighting system agency compliance
Input
Voltage Range: 90-264 VAC
Frequency Range: 47-63 Hz
Max Input Current: 1.6A@115VAC input
Max Inrush Current: 30A@230VAC input, 25˚C, cold start up
Output
Max Power: 60W
Efficiency: 83% Typical @ full load, 230 VAC input
Line Regulation: +/- 1% Max
Load Regulation: +/- 3% Max
Over-Voltage Protection: 120% Max
Over Load Protection: Constant Current Limiting
Operating temp.: -20˚C to 60˚C (Full Load), 70˚C (50% Load)
Weight: FC - 1lb 6.7oz
FT - 1lb
Catalog Volume 1.0
B 13
EVPS150
188mm
7.8”
188mm
7.8”
50mm
2”
111mm
4.37”
DESCRIPTION
150W single output switching power supply
• Low cost, high reliability
• High Efficiency, low working temp
• Built -in EMI filter, low ripple noise
• Compact Size, light weight
• Power efficiency
• Shirt circuit/ overload/ over voltage protection
• Universal AC input / full range
• Approvals: ETL/TUV/CB/CE/ETL/UL
• 1 year warranty
100~120VAC 3.2A/ 220~240 VAC 1.6A
• Input voltage • Input frequency 47~63 Hz
• Inrush Current
cold start, 35A/ 115V & 230V
• Output voltage 12VDC or 24VDC
• Overload protection 105%~ 150% output shutdown
• Setup, rise, hold up time 100ms, 50ms, 20ms
• Withstand voltage
I/P-O/P:3KV, I/P-F/G: 1.5KV, 1min
• Working Temperature -10˚C~60˚C
• Safety standard
UL 1012, TUV EN60950, UL1950
• EMC standard
EN55022 class B, EN61000-4-2,3,4,5
EN60555-2,3
• Connection
7P/ 9.5mm pitch terminal block
• Weight/ packing
0.8kgs/pcd; 23pcs/ 17kgs/ 1CUFT
• Dimension
188x110x50mm / 7.9x4.4x2"
The EVPS150's Performance with the FlexLED mono-chromatic 12"
• Number of output terminal on Power Supply: 2
• Total number of Feet per run:
16' (1.5 w/Ft Red, Clear Red, Amber, Orange)
16’ (2.8 w/Ft. Blue, Green)
11' (3.2 w/Ft. White)
• Max Number of feet: 100' (1.5 w/Ft Red, clear Red,Amber,Orange)
54' (2.8W/Ft Green, Blue)
47’ (3.2 w/Ft White)
• Max. number of sections:
6.25 (Red, clear Red, Amber, Orange) 16’
4 (Green, Blue) 16’
4 (White) 11’ Per Wire
• Number of wire hookups:
7 (Red, Clear Red, Amber, Orange) - 16’ per wire
4 (Green, Blue) 16’ Per Wire
4 11’ section per wire
• Max. Distance of power cable connected from the power supply to a new run of FLEXLEDs: 30'/ 9.14m
MODEL
NOTE* power supply will need to be revised in a nema enclosure for
outdoor applications
EVPS150: 150W 12VDC LED Power Supply - 1 year warranty
EVPS150-24: 150W 24VDC LED Power Supply - 1 year warranty
Catalog Volume 1.0
B 14
C HL N
I C A L S P E C I F I C AT I O N S
LT EE D
ighting
EVPS320
214.3mm
8.44”
49.3mm
1.94”
114.3mm
4.5”
DESCRIPTION
LED Electronic Driver
• Low Cost, High Reliability
Features
• UL Class 2
• Damp location rated
• Small, compact size
• Inherent short circuit protection
• Extreme low temperature performance (-40C)
• Tightly regulated output (1% line, 5% load)
• High power factor
Benefits
• Limited output voltage and current plus isolation for safe operation
• Suitable for use in self-contained signs and raceways
• Facilitates use in self-contained signs for the simplest and most economical final installation
• Added safety without any troublesome fuses
• Allows use in any outdoor application
• Consistent light output regardless of line and load levels
• Minimizes amperage draw to reduce the number of power feeds required
• Peace of mind for your sign from the industries most trusted component maker
Input:
AC input - 9 inch 18AWG leads, Line (Black), Neutral (White)
Input Voltage - 88~264VAC 47~63Hz; 124~370 VDC
AC current - 4A/115V 2A/230V
Current Max (A) - 0.70
Output:
DC output - 12VDC, 24VDC
Output Current - 0~24A
Power max (W) - 288
Current Max (A) - 4.0
Max Allowable Case temp.: 90˚C
Weight: 1.5 lbs
MODEL
EVPS320
EVPS320-24
SVI Product Catalog
300W, 12VDC Power Supply - ETL Listed - 1 year warranty
300W, 24VDC Power Supply - ETL Listed - 1 year warranty
Catalog Volume 1.0
B 15
DC LED Dimmer
(SVi-LED-DIM-8)
shown with wall plate – not included
DESCRIPTION
This Standard (four-wire) DC Dimmer is designed for incandescent lights and heating elements. Use with electronic appliances or fluorescent lights is
not recommended and damage may result. Not for use with motors.
This Dimmer replaces a toggle switch, and adds a variable brightness function in addition to on/off. Modification to existing wiring is rarely needed.
Mode of Operation: Continuously variable,
pulse width modulation
Supply Voltage: 8 to 20 vdc working, up to
30 vdc momentary. Dimmer must be fused
at electrical box
Output Voltage Range: From zero vdc to
essentially supply voltage
Maximum Continuous Output Current:
Full rated current up to 105˚F (40˚C) (with
restrictions noted)
Reverse Battery Protection: Input leads can
be reversed connected without damage.
Fuse link on back of circuit board blows
if battery voltage is reverse connected
across negative leads and main fuse or
circuit breaker inoperative.
Forward Transient Protection: Double
resistive/capacitive filtering, zener diode
clamping
Voltage Drift: Nil with steady input voltage
Power Dissipation of Drive Circuitry: Less
than 0.038W. No-load current draw is
about 1mA. Nil current used in click-off
position
Service Life of on/off Switch: About 50,000
cycles
Heat Sink: Heat sink is electrically isolated
from voltage and acts as a circuit
enclosure. Maximum temperature rise
under load is about 40˚F (22˚C) above
ambient
Size: About 1 3/4” square maximum
Ambient Temperature Range: -40˚F
(-40˚C) to 115˚F (46˚C) (with restrictions noted)
DC-DC Conversion Efficiency: About 98%
at full rated current, higher at lower current.
Load Types: Optimized for resistive loads
Weight: From 3 to 5 oz (84 to 140 gm)
depending on options
Load Regulation: Generally less than 3%
from minimum load to maximum load at all
settings
Line Regulation: Directly proportional to
supply voltage
Accessories Included: Detailed installation
instructions, color-coordinated mounting
screws
Safety and Fire Approval: UL LISTED to U.S.
and Canadian safety standards. Look for
the UL Mark
MODEL
SVi-LED-Dim-8 - For incandescent and LED lights up to 4 amps.
Supply Voltage - (8-20 vdc range)
Catalog Volume 1.0
B 16
LED LIGHTING
RGB LED Replacement Lamps
for Portable Spa Applications
Portable
Spa
Lighting
AGS12
AGS24
With 5 different color modes the
AGS12 and AGS24 transform your
above ground spa into a color
changing oasis.
SVI Product Catalog
Catalog Volume 1.0
B 17
Portable Spa LED Lighting
2”
(50mm)
2” (50mm)
AGS12
1.5” (38mm)
AGS24
DESCRIPTION
AGS12
12 LED replacement lamp for portable spa application
AGS24
24 LED replacement lamp for portable spa application
AGS2
AGS24
12 LED Above Ground Spa Light - 2” diameter
24 LED Above Ground Spa Light - 2” diameter
Digital color-changing LED replacement lamp for portable
spa application.
Digital color-changing LED replacement lamp for portable spa
application.
Bi-post connector fits most wedge-based sockets.
Bi-post connector fits most wedge-based sockets.
No external controller required. (use existing power switch)
No external controller required. (use existing power switch)
Lights can display thousand of colors with variable intensity RGB LEDs.
Lights can display thousand of colors with variable intensity RGB LEDs.
5 different color modes:
• White Only • Color Lock • Color Change • B/G Mix • Party Mode - Multiple Color Mix
5 different color modes:
• White Only • Color Lock • Color Change • B/G Mix • Party Mode - Multiple Color Mix
MODEL
AGS12-N (Call factory for availability)
AGS24-N-LL: Non-Synchronous
Catalog Volume 1.0
B 18
LED LIGHTING
Edison Based RGB LED Replacement Lamps
for Existing In-Ground Pool & Spa or with a housing
for new construction.
LED
Pool & Spa
Lighting
IGS54 and IGP231
IGS54 and IGP231 ar Edison Based
RGB LED Replacement Lamps/
Housing for In-Ground Pools &
Spas.
SVI Product Catalog
Catalog Volume 1.0
B 19
Pool & Spa
LED Lighting
IGS54
IGS54
IGP231
IGS54 w/ housing
IGP231 w/ housing
DESCRIPTION
Edison Based RGB LED Replacement Lamps/Housing for In-Ground Pools & Spas.
IGS54
In Ground Spa Light
Energy Efficient, Long Lasting, Easy to Install,
Brilliant color, No moving parts, ETL Listed.
Built-in Color Mode - Control seven (7) color modes automatically
through existing light switch.
IGP231
In Ground Pool Light
Energy Efficient, Long Lasting, Easy to Install,
Brilliant color, No moving parts, ETL Listed.
Built-in Color Mode - Control seven (7) color modes automatically
through existing light switch.
MODEL
SPA LIGHT
IGS54-12LL:
SH54-12-15:
SH54-12-30:
SH54-12-50:
Self-Color
Self-Color
Self-Color
Self-Color
Changing
Changing
Changing
Changing
LED
LED
LED
LED
Spa
Spa
Spa
Spa
Light
Light w/ housing 15’ Cord, 12 volt
Light w/ housing 30’ Cord, 12 volt
Lights w/ housing 50’ Cord, 12 volt
SPA HOUSING
SH54-120-15:
SH54-120-30:
SH54-120-50:
SH54-120-75:
SH54-120-100:
Self-Color
Self-Color
Self-Color
Self-Color
Self-Color
Changing
Changing
Changing
Changing
Changing
LED
LED
LED
LED
LED
Pool
Pool
Pool
Pool
Pool
Light
Light
Light
Light
Light
POOL LIGHT
IGP231-12LL:
IGP231-120LL:
Self-Color Changing LED Pool Lights
Self-Color Changing LED Pool Lights - 120V
POOL HOUSING
PH54-120-15:
PH231-120-30:
PH231-120-50:
PH231-120-75:
PH231-120-100:
PH231-12-15:
PH231-12-30:
PH231-12-50:
Self-Color
Self-Color
Self-Color
Self-Color
Self-Color
Self-Color
Self-Color
Self-Color
Changing
Changing
Changing
Changing
Changing
Changing
Changing
Changing
LED
LED
LED
LED
LED
LED
LED
LED
Pool
Pool
Pool
Pool
Pool
Pool
Pool
Pool
Light
Light
Light
Light
Light
Light
Light
Light
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
w/
housing
housing
housing
housing
housing
housing
housing
housing
housing
housing
housing
housing
housing
15’ Cord, 120 volt
15’ Cord, 12 volt
30’ Cord, 12 volt
50’ Cord, 12 volt
NICHES
28.0600: Gunite Pool niche
28.0601: Gunite Spa niche
Catalog Volume 1.0
B 20
C HL N
I C A L S P E C I F I C AT I O N S
LT EE D
ighting
L E D L ighting
Digital Lighting System
DLS-P1
DESCRIPTION
The LED DLS is a totally digital system. Using industry standard connectors, you can save time & money. Maximize your design flexibility with the DLS.
Standard full color programmable control.
CONTROLLER
WIRE CABLE
STAR POINT
DLS-C12:
12V (low voltage)
system controller
DLS-J1-2:
4-conductor 1”
jumper cable w/
2RJ11 connectors
DLS-C120:
120V system
controller
DLS-C220:
220V system
controller
DLS-C12-LC:
12V (low voltage)
system controller
- change mode
through ON/OFF
switch only
DLS-J5-2:
4-conductor 5”
jumper cable w/
2RJ11 connectors
DLS-J10-2:
4-conductor 10”
jumper cable w/
2RJ11 connectors
DLS-SP500:
4-conductor 500’
cable spool w/o
2RJ11 connectors
DLS-SP1000:
4-conductor
1,000” cable
spool w/o 2RJ11
connectors
SVI Product Catalog
UNDERWATER
LED SYSTEM
MODULAR
CONNECTOR
TOOLS &
ACCESSORIES
DLS-P1:
Transparent
star point cover
(plastic) - No LED
or LEADS
DLS-L12:
12 LED variable
RGB - underwater
LED lamp
DLS-RJ11:
RJ11 connector
DLS-TCRIMP
Crimper /
Stripper for RJ11
connectors
DLS-P2:
LED & LEAD star
point assembly
w/o DLS-P1
DLS-L24:
24 LED variable
RGB - underwater
LED lamp
DLS-P3:
Completed
star point LED
assembly
DLS-LADAP:
Light adapter (l12
& L24) for light
housing
DLS-L-HS:
5” light housing
DLS-L-HS-SM:
3 1/8” light
housing
DLS-C2FF:
In-Line connector
DLS-C3Way:
3-way female
connector
DLS-250F:
5’ with 2 female
DLS-420F:
10’ with 4 female
DLS - 550F:
10’ with 2 female
DLS-T5BIT:
0.5 dia. Tungstan
drill bit for Smart
Star Point
DLS-TEST1:
1 cable /
connector tester
for cross wire and
connectivity
SVSA:
Adhesive Silicone
KITS
DLS-KIT 120V:
10 points Starter
Kit - 120 volt
DLS-KIT 220V:
10 points Starter
Kit - 220 volt
Catalog Volume 1.0
B 21
Catalog Volume 1.0
FIXTURES
FUNCTION AND DECOR
SV Product Catalog

Catalog - All Pages | Nexxus Lighting

Transcription

Similar documents

The 1897 Sears, Roebuck and Co. Catalog

LED Starcloth - S+H Technical Support Ltd

ARI Partsmart Flyer

ARI Part Smart Flyer

technical rider

19877 nuvi 660 specs

Lazy, Luxurious Days

LEDs Buyer`s Guide

Arkaos 2012 General Catalog

d3 drives live broadcast of Premios Juventud Awards