werever_12-34-00_sd_cabinets-1

Transcription

MANUFACTURED PLASTIC CASEWORK
12 34 00
Werever Products, Inc.
1. Product Name

Werever Waterproof Cabinets™
2. Manufacturer
Werever Products,
Werever
Products,Inc.
Inc.
6120 Pelican
Creek
Circle
3900
S. 50th
Street
Riverview,
FL 33578
Tampa,
Florida,
33619
Phone:888-324-3837
Phone: 813-241-9701 ext. 203
Fax:813-241-9705
Email: [email protected]
Web: www.werever.com
3. Product Description
Basic Use
Used in indoor and outdoor applications where durable cabinetry
is needed due to exposure to moisture, extreme changes in
temperature, (i.e.-60–267 degrees F) and/or high wear and tear.
Werever Cabinets hold up in even the toughest environments
and can be used in the following: kitchens, bathrooms, offices,
common areas, garages, pool areas, dog kennels, laboratories,
areas with hazardous waste, etc.
The cabinets are waterproof, modular and reconfigurable. They
are constructed of 3⁄4 and 1⁄ 2 inch high density polyethylene
(HDPE) panels with hardware-free joints and are easily installed.
Composition and Materials

Nylon pins

Nylon leveling legs

Stainless steel screws

304 stainless steel hinges

Full extension stainless steel slides (in pull-out cabinets)

Back panels, drawer boxes and drawer slides are UVstabilized 1⁄2 inch HDPE

Side, floor and door panels; drawer faces; shelves and top
spreaders are UV-stabilized 3⁄4 inch HDPE
Benefits

Durable

Waterproof

Easy to install

ADA compliant available

Scratch and stain resistant

Hardware-free drawer slides

Requires little to no maintenance

HDPE board has a solid color throughout

Hardware-free joints with no glues or welds

Guaranteed not to warp, splinter, peel or rot

Cabinets are customizable and reconfigurable

Products are FDA approved for Food-Safe Contact

Can withstand over 300 chemicals, including acids, chlorine
and salt water: see list of chemicals here
Sizes
See Table 1.
Colors
Online color chart here.

Tan

Seafoam

Black

Espresso

White

Everglade

Charcoal

Chocolate

Sandshade

Glacier Grey

Dolphin Grey
Door Style Options
Door styles shown here.

Sport

V-groove

Plano

Traditional

Classic

Double Cove

Classic w/Cove
Accessories/Coverings
Decorative back, end and toe kick panels are available.
1
12 34 00
Table 1—Standard Cabinet Sizes*
Type
W × H† × D (in inches)
Base with full-height doors
9–36 × 343⁄4 × 24
Base w/drawer
9–30 × 343⁄4 × 24
Sink base w/false drawer face
9–57 × 343⁄4 × 24
Sink base w/full hight doors
9–57 × 343⁄4 × 24
Sink base w/tilt-out face
9–30 × 343⁄4 × 24
ADA sink base
30–42 × 343⁄4 × 24
3-drawer base
9–21 × 343⁄4 × 24
4-drawer base
9–27 × 343⁄4 × 24
Grill bases ‡
27–63 × 343⁄4 × 27
Sideburner base
15–24 × 343⁄4 × 24
Grill pedestal w/doors ‡
9–48 × 343⁄4 × 27
Grill pedestal w/drawers ‡
9–21 × 343⁄4 × 27
Blind base corner cabinet
36, 42 × 343⁄4 × 24
Diagonal corner cabinet
36, 39 × 343⁄4 × 24
Open shelf base cabinet (no doors)
9–30 × 343⁄4 × 24
Pull-out trash cabinet w/full-height door
15–19 × 343⁄4 × 24
Double pull-out trash cabinet w/full-height door
20 × 343⁄4 × 24
Double pull-out trash cabinet w/drawer
20 × 343⁄4 × 24
Pull-out LP tank cabinet
18 × 343⁄4 × 24
Pull-out tray cabinet w/full-height door
15–24 × 343⁄4 × 24
Pull-out tray cabinet w/drawer
15–24 × 343⁄4 × 24
Pull-out cooler cabinet w/full-height door
15, 18 × 343⁄4 × 24
Pull-out cooler cabinet w/drawer
15, 18 × 343⁄4 × 24
Pantry cabinets
18, 24 × 60 × 15
Pantry cabinets
18, 24 × 72 × 15
Pantry cabinets
18, 24 × 84 × 15
Base filler panels
1
Base corner filler
3 × 343⁄4 × 3
Corner posts: 45 and 90 degrees
—
Customs Cabinet Sizes
Base filler with double return: 3, 6 and 9" wide
—
Refrigerator filler: 1–12" wide
—
Werever Products, Inc. offers custom design services and
custom cabinet sizes. Please contact via phone or email for
more information.
⁄4 –12 × 343⁄4 × n/a
1
Refrigerator end panel: 2 ⁄ 2–12" wide
—
Finished return panel: 21⁄ 2–12" wide
—
Custom Design Services
Finished back panels: 3⁄ 4–96" wide
—
Toe kick panels: 4, 8' long (5" tall)
—
Corbels
10 × 9 × 21⁄ 2
Wall corner filler
3 × various × 3
Werever Products offers custom design services and cabinets.
Clients receive 3D renderings, plan view and elevation views
complete with an itemized, no-obligation quote showing exact
costs shipped to the jobsite.
Wall filler panels
1
Wall cabinets
9–27 × various ×15
⁄4 –12 × various × 15
* Cabinet widths are generally in 3" increments from 9–63". Contact mfr. for custom sizes.
† Std. base height is 343⁄4" off finished floor. Cabinet box height is 31" with nylon legs beneath
that will adjust from 33⁄4–53⁄4" inches tall.
‡ Only grills with insulated liners can be installed.
Product Limitations
Cabinets can be used indoors or out. Warping or melting can
result if cabinetry is directly exposed to temperatures in excess
of 267 degrees F. (Example: installation of built-in grill with no
insulated liner.)
2
12 34 00
Table 1—Standard Cabinet Sizes*
Type
W × H † × D (in inches)
Wall cabinets
9–27 ×15 × 15
Wall cabinets
9–27 × 18 × 15
Wall cabinets
9–27 × 21 × 15
Wall cabinets
9–27 × 24 × 15
Wall cabinets
9–27 × 30 × 15
Wall cabinets
9–27 × 36 × 15
Wall cabinets
9–27 × 42 × 15
Open wall cabinets
9–27 × 12 ×15
Open wall cabinets
9–27 ×15 × 15
Open wall cabinets
9–27 × 18 × 15
Open wall cabinets
9–27 × 21 × 15
Open wall cabinets
9–27 × 24 × 15
Open wall cabinets
9–27 × 30 × 15
Open wall cabinets
9–27 × 36 × 15
Open wall cabinets
9–27 × 42 × 15
Diagonal wall corner cabinet
36, 42 × various × 15
Blind corner wall cabinets
36, 42 × various × 15
* Cabinet widths are generally in 3" increments from 9–63". Contact mfr. for custom sizes.
† Std. base height is 343⁄4" off finished floor. Cabinet box height is 31" with nylon legs beneath
that will adjust from 33⁄4–53⁄4" inches tall.
‡ Only grills with insulated liners can be installed.
4. Technical Data
Applicable Standards
American National Standard Institute/Business & Institutional
Furniture Manufacturer Association (ANSI/BIFMA)
X5.9-2004 Storage Units, in each of the categories below:

• Section 4.2 Functional Load Test
• Section 4.3 Proof Load Test
• Section 5 Leg/Glide Assembly Strength Test
• Section 6 Racking Resistance Test
• Section 7.1 Top Load Ease Test - Cyclical
• Section 8.2 Upward Force Disengagement
•Section 9.3 Stability Test Type I Units with at least 1
Extendible Element
• Section 9.4 Stability Test Type I Units with Multiple
Extendible Element
• Section 10 Storage Unit Drop Test
• Section 12 Rebound Test
• Section 13 One Stop Test
• Section 15.2.2 Cycle Test for Extendible Elements Wider
than Deep
• Section 17.2 Strength Test for Hinged Doors
• Section 17.3 Hinge Override Test
• Section 17.6 Wear and Fatigue Test
• Section 17.11 Slam Closed Test
• Section 20 Pull Force Test
ASTM International (ASTM)

A STM D256-10 Standard Test Methods for Determining the
Izod Pendulum Impact Resistance of Plastic

A STM D570 Standard Test Method for Water Absorption of
Plastics

ASTM D638 Standard Test Method for Tensile Properties of
Plastics

ASTM D792 Standard Test Methods for Density and Specific
Gravity (Relative Density) of Plastics by Displacement

ASTM D1525 Standard Test Method for Vicat Softening
Temperature of Plastics
ASTM D1708 Standard Test Method for Tensile Properties of

Plastics by Use of Microtensile Specimens

ASTM D1894 Standard Test Method for Static and Kinetic
Coefficients of Friction of Plastic Film and Sheeting

ASTM D2240 Standard Test Method for Rubber Property—
Durometer Hardness

ASTM D3418 Standard Test Method for Transition
Temperatures and Enthalpies of Fusion and Crystallization of
Polymers by Differential Scanning Calorimetry

ASTM E831 Standard Test Method for Linear Thermal
Expansion of Solid Materials by Thermomechanical Analysis
Underwriters Laboratories (UL)

UL 94 Standard for Safety of Flammability of Plastic Materials
for Parts in Devices and Appliances
3
12 34 00
Approvals

FDA: 21CFR 177.1520 approval for Food-Safe Contact from the
Food and Drug Administration (FDA)
ADA: available in an ADA height of 331⁄ 2 inches height

Environmental Considerations
Werever Waterproof Cabinets can be recycled.
5. Installation
Preparatory Work
A hard surface is required for installation. Tools needed: levels,
Phillips screwdriver, drill, bits and carpenter square.
Precautions (Performance, Safety)
Make sure cabinets are level and plumb by adjusting legs. If
cabinets are not level and plumb, the doors and drawers can
rack.
Installation instructions are available here.
Delivery, Storage and Handling
Cabinets are delivered by ground freight to the jobsite curbside.
Cabinets are heavy; adequate labor is required to move delivered
cabinets to the final installation area.
6. Availability and Cost
Availability
Most cabinet orders can be shipped within four weeks, although
lead times may vary.
Cost
9. Technical Services
Werever's experienced designers will translate client ideas
into a custom design. Not canned diagrams, clients receive
3D renderings, plan view and elevation views complete with an
itemized no obligation quote showing exact costs shipped to the
jobsite.
10. Filing Systems

CMD
Additional product information is available from the

manufacturer upon request Please contact Werever Products, Inc. for pricing information.
7. Warranty
Polyethylene casework in commercial applications shall be
warrantied for a period three (3) years, from the date of delivery
by Manufacturer and shall cover only defects in material and/or
workmanship.
Defects reported to Manufacturer in writing prior to the
expiration of the warranty period shall be repaired or replaced at
manufacturer’s option.
Residential cabinetry applications are warranted by a Limited
Lifetime Warranty.
8. Maintenance
Clean with soap and water as required.
4