Menvier Brochure - Enterprise Security Distribution

Radio transmitters and
receivers
Menvier intruder alarms
Revision 1
The new Menvier range
from Cooper Security
Technology
Decimal expansion
More powerful, more flexible,
more customisable
Menvier Security has a strong heritage producing high
performance intruder alarm systems. For many years it has
been the ‘go to’ product range for large installations with
sophisticated building services integration. Its advanced
zone control and extended output options enable detailed
customisation of systems to meet customers’ exacting
requirements.
The new Menvier range from Cooper Security builds on this
history to offer the performance and flexibility customers
expect. All the panels have onboard Ethernet providing a web
browser interface and local networking capability. End stations
have been designed to house a minimum of one 17Ah battery
capacity (two in the Menvier300) and give a full range of
customisable and programmable output options.
All the panels offer an enhanced range of zone options
including shunt key and shuntable zones. The panels also
support the configuration of zone resistance and supervision
settings by individual zone to enable faster system takeover.
Menvier panels support both wired and radio expansion. The
radio system used is the secure 868MHz narrowband radio
solution shared with other Cooper Security products. This is
carefully controlled using high performance electronics to give
the greatest range and reliability available on the market.
The new Menvier range is PD6662:2010 and BS8243
compliant, giving you confidence that the systems will meet
the very latest standards.
2
All panels have 10 wired zones on the end-station and
expand in 10 zone blocks making it easier to identify
expanders and zone locations.
Performance bus technology
The Menvier40 bus can accommodate 20 bus
devices and the Menvier100 and Menvier300 can
accommodate 45 devices. This gives significantly
increased flexibility and system control.
Semi-automatic addressing
Devices are addressed by the push of a button. This
ensures two devices will never be given the same
address and saves hours of onsite and diagnostic time.
Bus device locator
Enables the fast and easy location of bus-mounted
devices, saving significant time on service and
maintenance visits.
Dynamic engineer session
Allows the transfer of the engineer session around the
system’s keypads to speed up installation.
Compatibility
All Menvier panels are compatible with a wide range of
Cooper Security intruder peripherals see pages 8-10
for details.
Web browser interface
All the new Menvier panels have a built in web
server and Ethernet connection. This enables local
configuration through a web browser with all the
convenience of the configuration software and profile
held on the panel. It also enables local network
connection of panels for onsite monitoring and building
services integration.
3
Menvier40
Menvier100
Ideal for smaller PD6662:2010 grade 2 or 3
installations, the Menvier40 offers advanced
flexibility and configuration, with 10 zones on the
end-station, expandable to 40 through wired and
radio expanders over five wards.
The Menvier100 has been designed for mid-sized
installations at PD6662:2010 grade 2 or 3, its 100
zones can be configured over 10 wards through
radio and wired expanders. The Menvier100
accommodates 250 users and, using the radio
expanders as portals, provides unrivalled holdup device coverage and set and unset range for
the remote control in addition to the PIN and prox
setting options.
The system can accommodate 100 users each
able to use PIN, Prox and remote control to set the
system. The panel will also accept an additional
HUD device per user. The Menvier40 is supplied
for easy installation with two distinct parts, endstation for first fix and separately packaged PCB
on a clip-in carrier.
Specification
The panel is supplied for easy installation with
two distinct parts, end-station for first fix and
separately packaged PCB on a clip in carrier.
Specification
101mm (incl stand off)
101mm (incl stand off)
320mm
400mm
16mm stand off
Weight: 4.9Kg
Part no. Menvier40
4
320mm
400mm
16mm stand off
Weight: 4.9kg
Part no. Menvier100
To specify state:
To specify state:
Intruder alarm system,
compliant to PD6662:2010,
grade 2 or 3 and BS8243,
ten zones available on endstation expandable to 40
zones in multiples of ten using
wired and radio expanders.
Push button addressing and
programming through a web
browser interface.
Intruder alarm system,
compliant to PD6662:2010,
grade 2 or 3 and BS8243,
ten zones available on endstation expandable to 100
zones in multiples of ten using
wired and radio expanders.
Push button addressing and
programming through a web
browser interface.
Part no. Menvier40
Part no. Menvier100
5
Menvier300
The Menvier300 uses a larger metal box which can
accommodate up to two 17Ah batteries. It offers
300 zone capacity across 20 wards and 500 users at
PD6662:2010 grade 2 and 3. Expansion is delivered
through wired expanders; EXP-W10 and EXP-PSU
and radio expanders; EXP-R10 and EXP-R30.
System outputs are fully customisable using the
enhanced web-server interface either directly onto the
panel or over a local network connection. Like the
other panels in the range the Menvier300 has a full
suite of setting, unsetting and hold-up devices.
Specification
101mm (incl stand off)
427mm
400mm
16mm stand off
Weight: 6Kg
Part no. Menvier300
Technical specifications
Panel
Menvier40
Menvier100
Menvier300
PD6662:2010 Grade
2 or 3
2 or 3
2 or 3
BS8243
Yes
Yes
Yes
Maximum Zones
40
100
300
Users
100
250
500
Partitions / Wards
5
10
20
Common Area
Yes
Yes
Yes
Part Sets
3
3
3
On board wired zones
10
10
10
Batteries
1 x 17Ah
1 x 17Ah
2 x 17Ah
Networks
1
1
1
Maximum number Network Devices
20
45
45
No of radio keypads
5
10
20
Panel Relay Outputs
1
1
2
Programmable Panel Transistor Outputs
2
2
2
Maximum number of non plug by
programmable outputs
40
100
300
Plugby outputs
16
16
16
Built-in Ethernet port
Yes
Yes
Yes
External Radio Sounders
5
10
20
Number of WAM’s
5
10
20
On Board Loudspeaker Ports
1
1
2
Comms Modules ports
1
1
1
Power Available
1.5A
1.5A
3A
Aux Power Available
750mA
750mA
1.5A
Built in digicom
Yes
Yes
No
Mandatory log events
750
1,000
1,500
Non Mandatory log events
250
250
500
End Station (H x W x D)
320mm x 400mm x101mm
320mm x 400mm x101mm
427mm x 400mm x 101mm
Calendar Timers
5
10
20
Custom Outputs
5
5
10
To specify state:
Intruder alarm system,
compliant to PD6662:2010,
grade 2 or 3 and BS8243,
ten zones available on endstation expandable to 300
zones in multiples of ten using
wired and radio expanders.
Push button addressing and
programming through a web
browser interface.
Part no. Menvier300
6
7
Benefit
Setting and unsetting without wires
EXPANDERS
Hardwired Expander
Part number
EXP-W10
Description
10 zone wired expander
Technical Specification
10 wired inputs, variable resistance
4 transistorised outputs
Push button addressing
Bus device locator
Benefit
25% more zones per expander
Control external equipment
Avoid addressing errors
Save servicing time
Technical Specification
10 or 30 radio inputs
8 radio outputs
Push button addressing
Bus device locator
Benefit
Easy addition of detection devices
Control external equipment
Avoid addressing errors
Save servicing time
Technical Specification
10 wired inputs, variable resistance
20 programmable outputs
Charge and maintain up to 2 x 17Ahr batteries
Benefit
Additional power and zone expansion in one box
Install fewer power supplies due to high current
provided
Technical Specification
Coverage: 12m x 90° (XCELR)
Coverage: 9m x 90° (XCELRPT)
Dimensions: 115 x 56 x 56mm
Pet tolerance up to 20kg (RPT only)
Benefit
2 x AA alkaline batteries
Minimum 36 month battery life
Up to 4km radio range
Common housing wired/wireless
Technical Specification
Dimensions: 90 x 35 x 24mm
Benefit
Compact and discreet design
Optional dual function capability
Simple to fit
Exceptional radio range
EXPANDERS
Radio Expanders
Part number
EXP-R10
EXP-R30
Description
10 zone radio expander
30 zone radio expander
8
RADIO DETECTION DEVICES
Description
10 zone, 3Amp power supply
Xcel Radio PIR
RADIO DETECTION DEVICES
Part number
EXP-PSU
Radio Door Contact
RADIO DETECTION DEVICES
EXPANDERS
Expander Power Supply
Shock Sensor
Part number
XCELR
XCELRPT
Part number
734rEUR-00
734rEUR-01
734rEUR-05
734rEUR-06
Part number
738rEUR-00
738rEUR-04
Description
Radio PIR
Radio PIR Pet tolerant
Description
Door contact + shock input - white
Door contact + External FSL contact - white
Door contact + shock input - brown
Door contact + External FSL contact - brown
Description
Radio vibration detector - white
Radio vibration detector - brown
RADIO DETECTION DEVICES
Description
Radio keypad
RADIO DETECTION DEVICES
KEYPADS
Part number
i-RK01
WIRED DETECTION DEVICES
Technical Specification
3 x AA batteries
Built-in prox
Radio Keypad
Xcel Wired PIR
WIRED DETECTION DEVICES
Benefit
Clear and simple display
Simple menu driven operation
Easy set and unset
400 Series PIR - domestic
WIRED DETECTION DEVICES
Technical Specification
Large 2 x 20 character display
Navigation key
Built-in prox
400 Series PIR - commercial
WIRED DETECTION DEVICES
Description
Wired keypad
400 Series PIR - 360° ceiling mounted
Part number
739rEUR-00
739rEUR-00
Part number
720rEUR-00
720rEUR-50
Part number
XCELW
XCELWPT
Part number
CS-420
CS-430
CS-460
Description
Glass break transmitter (PCB only)
Glass break transmitter with sensor
Technical Specification
Dimensions: 52 x 50 x 20mm
Dimensions: 52 x 19 x 51mm
Description
Optical smoke detector
Optical smoke detector with lithium battery
Description
Wired PIR
Wired PIR Pet tolerant
Description
Digital PIR
Digital PIR Pet tolerant
Domestic TWINTEC PIR
Benefit
Compact and discreet design
Benefit
Advanced technology, photoelectric smoke
detector
Technical Specification
Coverage: 12m x 90°
Coverage: 9m x 90°
Dimensions: 115 x 56 x56mm
Pet tolerance up to 20kg (WPT only)
Benefit
Offers common appearance throughout a
hybrid installation
Technical Specification
Coverage: 12m x 90°
Benefit
Small and attractive digital PIR
Pet tolerance: Up to 38kg (CS-430 only)
Part number
CS-440
CS-480
Part number
CS-450
Description
Commercial Quad PIR
Commercial TWINTEC PIR
Technical Specification
Coverage: 15m x 90°
Coverage: 12m x 90°
Benefit
Attractive, yet discreet PIR
Technical Specification
Coverage: 9m diameter
Benefit
Attractive, yet discreet PIR
Technical Specification
Dimensions: 56 x 100.5mm
Benefit
Detects slow burning and smouldering fires.
Recognises rapid rises in temperature
4 modes of operation to suit most applications
Technical Specification
Impedance: 16ohm
Benefit
Compact and discreet design
Description
Wireless sounder
Working sounder (working backplate, no cover)
Decoy sounder
Decoy sounder (blank backplate, no cover)
Sounder cover (cover only)
Battery pack
Technical Specification
Dimensions: 346 x 212 x 76mm
Benefit
Minimum 3 years battery life
Adjustable drill holes
Built-in spirit level
The quiet installation mode allows you to install
and set up the sounder in isolation
Description
4 channel transmitter
Technical Specification
Dimensions: 105 x 150 x 30mm
Description
Ceiling mounted TWINTEC PIR
M12 (not an intruder device)
Part number
M12
Description
4 in 1 Fire detector
Internal Sounder
Part number
09040-00
Description
Internal sounder
External Sounders
Technical Specification
Dimensions: 118 x 30 x 27mm
Benefit
Compact and discreet design
NOTIFICATION DEVICES
Part number
i-KP01
RADIO TELEMETRY
KEYPADS
Wired Keypad
Optical Smoke Detector (not an intruder device)
NOTIFICATION DEVICES
The Menvier Range has a full complement of peripherals and detection devices to support installations. All products are compliant
to the latest standards and all are compatible with the full range of panels avoiding incompatibility issues and ensuring smooth and
easy installations. Radio devices all use Cooper Security’s secure 868MHz narrow band radio developed over 25 years to be the
most advanced solution and ensure the signal is communicated first time every time.
NOTIFICATION DEVICES
Accessories
Glass Break Detector
Part number
760ES
760EB
760DS
760DB
760CV
760SB
Dimensions: 346 x 212 x 76mm
Transmitter
Part number
703rEUR-00
Benefit
Connect up to 2 non radio devices
to a radio receiver
Optional battery power for locations
with no mains
9
RADIO TELEMETRY
RADIO TELEMETRY
RADIO TELEMETRY
RADIO TELEMETRY
Part number
706rEUR-00
Description
Lone worker and HUD
Technical Specification
Dimensions: 170 x 45 x 30mm
Benefit
Automatically activates when horizontal for 10
seconds to protect lone workers
Lock to prevent accidental operation
Description
Long range HUD transmitter
HUD transmitter
Technical Specification
Dimensions: 170 x 45 x 30mm
Dimensions: 170 x 45 x 30mm
Benefit
Double push button to activate HUA on
alarm panel
Lock to prevent accidental operation
HUD
Part number
726rEUR-50
726rEUR-60
HUD
Part number
710rEUR-00
Description
HUD transmitter
Technical Specification
Dimensions: 110 x 45 x 17mm
Benefit
Effective lightweight device with double push
buttons to activate
HUA on alarm panel
Part number
FOB-2W-4B
Description
2 way keyfob transmitter
Technical Specification
Dimensions: 58 x 38 x 19mm Weight: 32g
Battery type: Li-Mn. CR2450
Duration: 3 years (4 operations per day)
Range: Minimum of 200m in free space
Benefit
Long range
Confirm system setting for enhanced security
Easily interrogate system status
Extended battery life
Keyfob
PLUG-ON COMMUNICATORS
Description
4 button keyfob transmitter
Communicators
PLUG-ON COMMUNICATORS
Part number
i-FB01
Communicators
Communicators
Part number
i-DIG02
ADSL01
Part number
i-SD02
ADSL01
Part number
i-GSM02
Description
Digital communicator
ADSL filter
Description
Digital communicator
ADSL filter
Description
GSM communicator
Capability and support
All Cooper Security products are supported by the touchpoint partner programme – our
professional installer support service.
Technical Support
touchpoint offers fast technical support over the phone, by registering and entering your PIN or signing up for our phone number
recognition service, your call will be answered in under 30 seconds. Our website has become an unrivalled source of information on
all our products, log in securely to access technical information.
Training
2 Way Keyfob
PLUG-ON COMMUNICATORS
RADIO TELEMETRY
10
HUD
Technical Specification
Dimensions: 34 x 60 x 14mm
Benefit
Small, multi functional keyfob
Programmable buttons: Set, Unset,
Part Set or control outputs
A range of training courses are available across the UK, ranging from beginner through to advanced level to provide you with
proactive training to speed up installation and enhance your knowledge of our newest products.
Business Development Support
Support for your business development is provided through online customisable literature and keypad labels and provision of
materials to support promotional events.
For more information contact:
T: +44(0) 1594 541979
Technical Specification
Fast Format
ContactID
SIA 1, 2, 3 & 3EX/SMS
Benefit
Alerts user to issues by text
Multiformat reporting to ARC
Technical Specification
Fast Format
ContactID
SIA 1, 2, 3 & 3EX/SMS/Speech messages
Benefit
Alerts user to issues by text and/or
voice message
Multiformat reporting to ARC
Technical Specification
Fast Format
ContactID
SIA 1, 2, 3 & 3EX/SMS/Speech messages
Benefit
Alerts user to issues by text and/or
voice message
Multiformat reporting to ARC
E: [email protected]
11
Cooper Security
Security House
Vantage Point Business Village
Mitcheldean
Gloucestershire
GL17 0SZ
T: +44 (0) 1594 545400
E: [email protected]
Cooper Safety
Jephson Court, Tancred Close
Royal Leamington Spa
Warwickshire
CV31 3RZ
United Kingdom
BRO-MEN-40-100-300-12/1
T +44 (0) 1594 545400
E: [email protected]
For more information please contact
Touchpoint Member Services
Low Energy
www.coopersecurity.co.uk
All Cooper logos are valuable trademarks of Cooper Industries in the U.S and other countries. You are not permitted to use Cooper trademarks
without the prior consent of Cooper Industries.