R6 SERIES TRANSVERSE ROTOR COMBINES R 6 S ER

r6 SERIES
TRANSVERSE ROTOR COMBINES
r6 SERIES TRANSVERSE ROTOR COMBINES
We inventeD
tHe seLF-PrOPeLLeD
cOMbine in 1923
Making the harvest more productive is
all we’ve ever done. That’s why you’ll
find exclusive features on our combines
and many of our older inventions on our
competitor’s machines.
Curtis Baldwin, Inventor
r6 SERIES TRANSVERSE ROTOR COMBINES
We’ve been
reinventing it
ever since
The 2010 R6 features our best technology and construction to date. This
year, we have taken popular options
and made them standard. We have
made design changes in particular areas based on feedback from the many
farmers and harvesters who put their
combines to the test during harvest. We
are making the R6 Series even more
powerful, reliable and comfortable for
your dependable use, year after year.
bUiLt tO PerFOrM
WHere it cOUnts
A Gleaner R6 Series is not the same as other combines. Our transverse rotor keeps the crop moving in
a continuous line reducing bunches and plugs. Our patented accelerator rolls propel the grain through
a curtain of air cleaning crop with amazing efficiency, even on slopes. Our unloading system will have
you back in the field bringing in crop while others are waiting to unload.
Because at the end of the day, all that counts is getting the cleanest sample
possible without wasting valuable time doing it.
Building combines with the farmer in mind is the heart and soul of every Gleaner R6 Series.
Model
R66
Class
R76
VI
VII
Threshing system
Transverse
Transverse
Engine horsepower hp (kW) @1,900 rpm
300 (224)
350 (261)
Unloading boost hp (kW)
330 (246)
380 (283)
Power bulge hp (kW) @1,900 rpm
321 (239)
375 (280)
Grain tank capacity bushel (L)
300 (10,570)
330 (11,629)
Unloading rate bushel/s. (L /s)
4.0 (141)
4.0 (141)
Threshing and separation area in (m )
5,459 (3.52)
5,459 (3.52)
Cleaning area in (m )
7,729 (4.99)
7,729 (4.99)
G /C
G /C
2
2
2
Factory configurations**
2
* Per ISO Standard 5687
** G = Small grains, C = Corn /soybean
r6 SERIES TRANSVERSE ROTOR COMBINES
bUiLt WitH
HeArt AnD sOUL
Our desire to make a combine for the realities of the harvest never stops. We serve farmers and we
never forget that fact. And every year, we try to make the Gleaner better, easier to operate and more
ready to harvest.
Gleaner combines are built by the proud people of Hesston, Kansas, just a short drive from where
Gleaner was invented. Our state-of-the-art factory joins leading manufacturing processes with the
best people who take the job of assisting farmers very seriously.
Here’s what’s new on the 2010 R6 Series:
r6 SERIES TRANSVERSE ROTOR COMBINES
•
•
•
Newly designed 4” (101.6 mm) risers standard
onfrontaxletoleveltheattitude,improveshoe
performance,increasegroundclearanceand
unloader height. Redesigned the header lift
cylinders to reach the ground with new axle
andtireoptions.
Standard trailer receiver on rear axle and
taillight connector for pulling the new
DynaFlex™ header with optional slow speed
transportkit.
Battery quick disconnect for off-season
storage.
•
Cab improvements: noise reduction material,
an improved seat and a fire extinguisher on
thefrontladder.
• 10 idlers with greaseless bushings in the bin
unloader, propel drive and tailings return for
reducedmaintenance.
•
The spreader curtain was redesigned for
evenspreadingtoaccommodatethereachof
wider headers such as the new 40’ (12.19 m)
DynaFlexheader.
•
Easier-to-use bullet pins on feeder shields
and shortened the feeder floor to improve
feedingwithrisers.
•
•
Standardtailingsreturntorotor.
Relocated shocks for easier feed drum
removal.
•
Hydraulic straw spreader is standard with
improveddrivelocation.
•
Added access door to alternator in engine
compartment.
•
Thickerfloor,improvedstepsinthegrainbin.
•
Easieropeninggrainbindoors.
•
Standardelectricchafferandsieveadjustment.
•
Standardrearpower-foldladder.
•
Auto-Guide2
• Enhancedleafscreenairflowdesign.
•
•
Redesigned slingers on the rotary screen to
minimizemaintenance.
68” (172.72 cm) pitch helical for
enhancedthroughputcapacity.
7
2
9
3
8
4
1
6
5
tHe HeArt AnD sOUL
OF A gLeAner
For eight decades, the Gleaner combine has become known for its unique design and performance. This
performance comes from the combination of our own patented processes and components and a design
unlike any of our competitors.
Here’s what makes a Gleaner unique:
1
Two-stage, four-strand gathering chain system.
This allows the cylinder to be smoothly fed at the
same angle regardless of the header height. Long
feeder house with lowered rear feed floor with
65 in2 (420 cm2) to allow a smooth flow of material.
2
Natural Flow™ transverse rotor keeps crop moving
in one uninterrupted direction directly from the
header, into the rotor and out the rear of the
machine.
3
4
Distribution augers to spread material evenly
before entering the cleaning process allowing a
uniform ribbon of material without the uneven
feeding and bunching of other designs.
Accelerator rolls that speed the crops descent
allowing more air to clean the crop more
thoroughly and the process to be less susceptible
to hills and slopes.
5
Transverse fan with exclusive two-stage cleaning.
The first stage cleans heavy material right
beneath the accelerator rolls pushing chaff out
the rear of the combine. The second stage comes
up through the sieve and chaffer lifting remaining
chaff and carrying it out the rear of the combine.
This greatly improves cleaning efficiency over
competitive designs.
6
A fully welded frame keeps the R6 Series solid,
strong and provides a solid foundation for all
shafts and components.
7
A low center of gravity, heavy final drives and
welded frames on the R6 Series provide for large
bin capacities of 300 bushels (10,570 L) on the
R66 and 330 bushels (11,629 L) on the R76, which
is the largest standard bin capacity in the industry.
8
Unique “Direct Flow” two auger design features a
large 12” (305 mm) grain bin cross auger that feeds
the 14” (356 mm) swivel unloader auger. Because
we use only two augers versus competitive three
auger turret systems, it means better grain
quality, less wear, and reduced horsepower and
fuel requirements.
9
Galvanized exterior panels prevent rust, corrosion,
expensive repairs and static electricity build-up
associated with steel or plastic designs.
r6 SERIES TRANSVERSE ROTOR COMBINES
UnDerstAnDing tHe
nAtUrAL FLOW sYsteM
One of the main things that makes a Gleaner R6 Series unique is the Natural Flow feeding and
threshing. With the rotor sitting the width of the combine, the crop does not change direction when
moving from the feeder house to the rotor.
A variable-speed corn header
drive allows the operator to
change the corn header and feed
chains’ speed to adapt to crop
changes for the best productivity.
The process begins as grain enters the machine through the 69-inch (1,752 mm) long by 39-inch
(990 mm) wide feeder house which is powered by a 8 5/8-inch (219 mm) diameter front feed drum.
The feeder house can be reversed with the touch of a button from the operator’s seat in the event
of a plug.
The feeder house pivots vertically at the first chain, anchoring the rear chain on a fixed angle regardless
of header height. The second chain outpaces the first by 6 percent to prevent bunching. Four-strand
undershot feed chains offer 33 percent more chain support than competitive three-strand feed chains
to help prevent bent feeder slats.
Two undershot four-strand feed
chains provide high capacity and
reliability. (Compression springs
maintain feed chain tension.)
In addition to keeping the crop moving in a smooth ribbon from feeding to threshing, the Natural
Flow system has an additional feature that distinguishes it from competitor’s designs. Because the
rotor is moving in line with the way the crop is fed into the machine, material is pulled into the rotor
rather than being pushed in from the feeding system. This is a significant advantage in ensuring
smooth feeding and reducing plugs. Bottlenecks are reduced because a Gleaner R6 does not
narrow the crop mat when moving from the feeder house to the rotor. The width of crop mat remains
the same from the time it enters the feeder house to the time it enters the rotor also reducing plugs
and increasing threshing efficiency.
r6 SERIES TRANSVERSE ROTOR COMBINES
MOre eFFicient
tHresHing AnD
sePArAting
Once in the rotor, separation takes place throughout the full 360 degrees of the rotor cage, meaning
better effectiveness with less power.
One
button
varies
rotor
speed via an electro-hydraulic
valve. Concave settings are
also adjustable to changing
crop
conditions,
all
from
the operator’s seat.
The 24-inch (610 mm) diameter CDF rotor uses six rows of 3/4 inch (18 mm) high-profile bars that are
chromed and reversible— the grain configuration uses 1/2 inch (12.7 mm) bars in the threshing area.
The bars build just enough pressure to release grain that often escapes other rotors, while taking less
of a toll between bar and cage on the green-stem material. Three rows of three separator knives break
up green material and reduce horsepower requirements. Standard equipment is an easy-close rock
door that ejects foreign objects before they reach the concaves. Also available is an optional stone trap
for fewer stops in extremely rocky conditions.
The
high-wire
concave,
unique
to
all
Gleaner
R6 Series, brings 1.4-inch (35
mm) spaced wires closer to the
threshing surface for complete,
gentle threshing. Font grate
adjusts independently of the
concave assembly for varying
conditions.
Chromed and reversible cylinder
bars encourage long life. Available
1
/2-inch
(12.7
mm)
and
in
3
/4-inch (19 mm) spaced rasps to
accommodate tough crops. Factoryinstalled reverse rasp bars help reduce
grain loss.
68” (172.72 cm) pitch helical for
enhanced throughput capacity.
The 24-inch (610 mm) diameter CDF
rotor spins at optimal tip speed at the
point of first crop impact, ensuring a
thorough job of separation without
grain damage.
r6 SERIES TRANSVERSE ROTOR COMBINES
Distribution augers in the
separating system ensure uniform
delivery of grain and material
other than grain (MOG) to the
accelerator rolls.
cLeAner grAin
Gleaners are renowned for the ability to clean grain and reduce loss on slopes. This is possible
because of the patented accelerator rolls and two-stage cleaning process.
The cleaning process begins with distribution augers just underneath the threshing and separating
system distributing the material flow evenly into an even ribbon.
Rubber accelerator rolls, tilted
15 degrees toward the front of
the cleaning shoe grain pan,
accelerate grain downward four
times faster than simple freefall speed.
Two fluted rubber accelerator rolls accelerate grain and chaff downward at four times the speed of
free fall. The grain is then propelled through an evenly distributed air curtain from an 11-inch (279
mm) diameter, cab-controlled transverse fan. Dual-stage outlets provide air for precleaning at the
upper duct and final cleaning at the lower duct. The two-stage, high-velocity cleaning provides a
high-quality clean tank sample, even at the highest harvesting rates. The separated grain lands on
a cushion of grain in the flat louvered pan ahead of the chaffer.
As lighter chaff blows out the rear, material from the precleaning is processed by the chaffer.
A high-volume, low-pressure
curtain of air provided by the
1,150 rpm transverse-flow
fan blows away light chaff as
the accelerated grain passes
through unaffected.
r6 SERIES TRANSVERSE ROTOR COMBINES
UnMAtcHeD
UnLOADing
The unique DirectFlow™ swivel unloader on all Gleaner R6 Series accomplishes a marvel of unloading
speed with a larger 12-inch (305 mm) grain bin cross auger that feeds a massive 14-inch (356 mm)
unloader auger. This DirectFlow two-auger design is the basis for our R6 Series unloading system.
Because we only use two augers versus competition with a three-auger turret system, Gleaner has
a more efficient system with better grain quality and less wear. No gearboxes. No open drives. No
vertical augers.
With the transition angle between the grain bin cross auger and swivel auger reduced, it means less
horsepower and reduced fuel consumption to achieve this impressive unloading rate.
The unloading auger was lengthened by 3 feet (91 cm) to provide a 15-foot (4.54 m) discharge height
and a 23-foot (6.98 m) reach from center.
On the R66, with its massive 300-bushel (10,570 L) grain tank, the unloading time is 75 seconds. The R76
unloads its 330-bushel tank (11,629 L), with the largest Class VII standard bin capacity, in 83 seconds.
cLAss vii UnLOADing cOMPArisOn
How much time do you invest to fill ten 1,000-bushel grain trucks?
Average
Unloading
Rate (bu/sec)
Time Per
Unloading
Cycle (sec)
Total
Time
Invested
(min)
Model
Grain
Tank
(bu)
Gleaner R76
330
4.0
83
30
41.9
JD 9770 STS
300
3.0
100
33
55.0
Unloading
Cycles
CIH 7120
315
3.2
98
32
51.8
NH CR9060
315
3.2
98
32
51.8
r6 SERIES TRANSVERSE ROTOR COMBINES
A hydraulic variable speed
straw spreader and redesigned
spreader curtain provide up to a
40’ spread for enhanced residue
management. This allows full
adjustment of spread pattern
to match the header width and
current cropping practices.
better resiDUe
MAnAgeMent
The hydraulic spreader fingertip
control allows variable speed
from 75 to 400 rpm via an in-cab
control.
Chop residue even finer for
faster decomposition and easier
incorporation with the redesigned
two-speed,
fine-cut
straw
chopper with heavier knives.
The standard chaff spreader on the Gleaner R6 Series is an integral part of managing uniform seed
emergence, pesticide and fertilizer incorporation, and conservation tillage practices.
The chaff spreader on all R6 Series efficiently uses the high volume of air passing below the
accelerator rolls to blow chaff out the back of the combine. An adjustable tailboard and fins help
spread shoe material as it leaves the machine, spreading it into an even wider swath. There is no
stripping of material and no mechanical drives in the process.
Straw, corn stalks and stems exit the rotor discharge where non-grain material is handled by either
spreaders or choppers. To bale the straw or stover, simply remove the standard spreader and drop
the residue into a clean, compact windrow.
For extra heavy chaff spreading,
add the optional hydraulic chaff
spreader. Two hydraulically driven
impellers promise extra-wide
distribution.
r6 SERIES TRANSVERSE ROTOR COMBINES
eAsY tO rUn
eAsY tO KeeP rUnning
The R6 Series is designed to have the fewest number of belts, chains, augers and gear drives as
possible. This is to reduce the total number of moving parts, points of potential wear or breakage and
the number of hours you have to spend on service.
A
optional
auto-lubrication
system eliminates one more
tedious service task.
The walk-in rear engine compartment is the industry’s largest, and the combine’s overall low center
of gravity puts most machine parts within easy reach from the ground. Easily accessible suction-type
hydraulic filters, single reservoir and sight-level tube all work to limit service time demands without
risking hydraulic system integrity.
A portable work light, which
can be plugged into any one of
three power connections, has a
magnetic base for light when and
where you need it.
Standard front and rear power
ladders add simplicity and
efficiency.
r6 SERIES TRANSVERSE ROTOR COMBINES
ALL DAY AnD intO
tHe nigHt cOMFOrt
Optional heated leather seat (cloth seat
standard)
The Gleaner ComforTech II™ cab and controls put comfort and convenience to work to improve the
efficiency of every task and every operator. In the center of the cab is an adjustable air-ride seat
with armrests positions you within an easy-to-use and efficient layout of the control and monitoring
system. An effective, automatic, climate-control system, rounded visor roof and tinted glass shield
out the elements while still giving your full view. More than 120 cubic feet (3.4 cubic meters) of cab
space is accessible by a 40.5-inch (1,028 mm) door. A large service door opposite the entry makes
access to the console quick and convenient, while a large rear cab window gives you a complete
view into the grain tank.
Spoil yourself with our new optional
premium sound system which includes
AM/FM radio, CD player, satellite-ready,
weather band and MP3 player so you can
listen to your own music.
r6 SERIES TRANSVERSE ROTOR COMBINES
DGPS antenna receives its information from
the WAAS Satellite System to pinpoint the field
location.
The AE50-award-winning Yield Sensor II measures
the mass of grain flowing through the grain
elevator.
The moisture sensor provides instant crop
moisture readings.
The postage-stamp-sized SD card slot incorporated
into the Console II with Fieldstar II makes data
transfer to the office system quick, uncluttered
and easy.
Advanced Technology Solutions software allows
the operator to create maps of any geo-referenced
data.
The unique Console II color display incorporates
touch-screen flexibility. Fully programmable, it
is transferable to other Fieldstar II-compatible
equipment.
Using cutting-edge GPS-based technology,
Auto-Guide steers the combine along parallel
swaths through the field at higher rates of speed
and accuracy… pass after pass.
The Auto-Guide TopDock is a compact all-inone unit with 6-axis gyro for increased accuracy. A
remote antenna is also included to receive signals
in extreme northern areas of North America.
Auto-Guide is easily controlled from the Console II
touch-screen color display.
MeAsUre. MAnAge.
MOve AHeAD.
FieLDstAr ii sYsteMs
Add-on performance-data analysis leaves too much to chance under today’s demanding farming
conditions. That’s why all Gleaner combines come with integrated Fieldstar® II yield-monitoring
systems as standard equipment. Fieldstar II uses yield and moisture sensors, global positioning and
the Advanced Technology Solutions Console II to track yield data across terrains.
Advanced Technology Solutions Yield Sensor II features:
•
Low profile. No need to remove the sensor when folding the tank extensions.
•
Temperature-compensated load cell and full-width impact target reduce recalibration demands.
Single-point with excellent accuracy.
•
4X+ resolution in the load cell increases accuracy in light and low-yield crops.
•
Horizontal mount for fewer slope-induced errors.
•
Corrosion-resistant stainless steel impact target on high-quality plastic add to long service life.
Other ATS features that bring precision agriculture performance to your Gleaner combine include:
•
WAAS GPS antenna pinpoints field location to submeter accuracy.
•
Unique slim-line Console II incorporates color-display touch-screen technology and a secure
digital (SD) card slot for transferring data and console programs.
• Available Advanced Technology Solutions software for farm office personal computers allows you to
make maps of yield data, moisture level, fuel consumption, wheel slippage and other recorded data.
sAteLLite-AssisteD steering
Gleaner offers a satellite-assisted steering system which increases the productivity of your combine
while reducing unwanted overlaps or skips. The equipment is fully transferable to other AGCO AutoGuide Ready equipment and is easy to learn and use. Varying accuracy levels are available with the
fee-free WAAS correction signal with a dynamic accuracy of 10 inches (25 cm) or advance to the
high-precision local-base RTK system that delivers an amazing 0.8 inch (2 cm) of dynamic accuracy.
r6 SERIES TRANSVERSE ROTOR COMBINES
bUiLt WitH tHe POWer
tO get it DOne
1
2
The Gleaner combine’s large high-torque, split hydrostatic drive unit coupled to a four-speed
transmission and heavy-duty final drives provides ultimate power and reliability. The rear adjustable
steering axle and factory– or field-installed rear wheel assist (RWA) keep the combine moving
through the soft field conditions.
3
5
6
Pushing all Gleaner Class VI and VII combines, you’ll find a dependable power and easy-to-service
AGCO SISU POWER 84 CTA liquid-cooled turbo diesel engine. Efficient and high-torquing, the
engine’s low maintenance and good fuel economy come in addition to deep power reserves: from
300 hp (224 kW) in the R66 up to 350 hp (261 kW) to drive the R76; with power bulge at 1,900 rpm,
that jumps to 321 hp (238 kW) and 375 hp (280 kW), respectively. The rear-mounted engine distributes
weight better for less noise and vibration, plus better accessibility for service and maintenance.
AgcO sisU POWer 84 ctA engine FeAtUres
4
•
7
1 24valves(4percylinder)
2 2rockerarmspercylinder
3 Centralinjectorwith8holes
4 Electricfuelpump
5 Automaticelectric
preheaterinmanifold
6 Common-railinjection
7 CANBuselectronics
Four-valve-per-cylinder cross-flow head permits our engineers to center the injector over the
piston, improving fuel/air mixing to better control emissions and fuel consumption.
• Bosch common-rail fuel injection system takes its commands from the EEM3 electronic engine
management software for precise, faster response and more power per gallon of diesel.
• Three-ring pistons seal tight for efficiency and better oil control.
• Dual centrally supported cylinder liners eliminate liner cavitation, prolonging cylinder life.
• Lightweight, big-end connecting rods’ fracture-split production process leaves a rough-edge at
the face to improve holding power and durability while minimizing vibration.
•
Intercooling and exhaust gas recirculation make the AGCO SISU POWER 84 CTA fully
Tier III-compliant.
•
Large polyethylene fuel tank, protected by in-line canister-style separators, ensures an adequate
supply of clean fuel to feed the system.
•
Three-stage pilot injection
•
Automatic fuel temperature compensation
r6 SERIES TRANSVERSE ROTOR COMBINES
3000 series cOrn HeADs
The 3000 Series corn heads remain the industry’s lowest-angle corn heads, at only
21.5 degrees. Dividers slide under downed stalks and gently straighten for fast, easy
harvesting with less damage. Standard adjustable stripper plates are electrically
controlled in-cab. A knife roll option is available for prebreakup of BT corn as a fieldinstalled option. Available in 6-row, 8-row or 12-row with row spacings of 30” (762 mm)
- 36” (914 mm) for the 6-row model, 30” (762 mm) - 36” (914 mm) - 38” (965 mm) for the
8-row model and 20” (508 mm) - 22” (559 mm) - 30” (762 mm) for the 12-row model.
Electric, cab-adjusted stripper
plates allow the operator to make
on-the-go adjustments to meet
changing crop conditions.
A self-contained, modular gearbox and torque limiter on
each row unit provides greater
durability and allows easier row
width adjustment.
4200 series HeADers
The Gleaner 4200 Series high-capacity pickup headers include a 13 ft.
(4.0 m)- or 15 ft. (4.6 m) wide conveyor auger. Equipped with your choice of a
Swathmaster or Rake-Up attachment, 14 ft. (4.3 m)- wide for the 13-ft. header and
16 ft. (4.9 m)-wide for the 15-ft. header, it provides a direct, smooth crop flow through
even the densest windrows. With radial pin clutch protection, the 4200 Series comes
with factory-installed adapter and pickup attachment.
Gleaner Ultra-Float Suspension uses a heavy spring and shock
system to dampen rugged terrain and smooth out the rough spots.
An advanced, hydraulically positioned windguard, which can be raised
or lowered from the cab, improves feeding and reduces crop rolling.
5100 series DrAPer HeADers
The 5100 Series draper headers offer 41.5 in. (1,054 mm)-wide rubberized drapers
to help reduce losses in easily threshed crops. Gap-free placement reduces grain
loss. Available in 25-ft. (7.6 m), 30-ft. (9.1 m) and 36-ft. (10.9 m) widths, with a choice
of universal U2 pickup or polytine pickup reel to match your cropping needs. Four
coil springs provide six degrees of lateral float and 8 in. (203 mm) of vertical float,
independent of the combine.
An independent hydraulic drive
system contains its own reservoir
pump and filter for reliable power
to the cutterbar and side drapers.
7200/8200 series HeADers
Hydraulically
driven
SCH
planetary gear sickle drive system
moves the sickle at 1,200 strokes/
min with a 31/8-in. (80 mm) stroke
for smooth cutting.
The reinforced, rubberized canvas
drapers feature slats constructed
of reinforced fiberglass for
strength and durability.
The high capacity sickle features
spring hold downs evenly spaced
every 18 in. (457.2 mm) along
the entire cutterbar. The spring
hold downs reduce section and
guard wear with no adjustment
required. The spring hold downs
are exclusive to the high capacity
sickle.
The SCH Rollerguide is exclusive
to the SCH sickle. The Rollerguide
decreases friction on the sickle
providing reduced wear on
components.
The 7200 Series rigid cutterbar headers begin with a solid-welded steel frame for
a solid foundation. SCH epicyclic drive system assures a faster linear cut with less
vibration. Plus, the precision factory-balanced conveyor with exclusive 7-in. (178
mm) auger flighting and ensures smooth crop flow. Available with new level-2,
HCC pickup reel in widths up to 35 feet (10.6 m). Electric, in-cab fore-and-aft reel
adjustment comes standard, so you can adjust to changing crop conditions on the fly.
Available in 25’ (7.6 m), 30’ (9.1 m) and 35’ (10.6 m).
The 8200 Series flex headers start with all the standard features of the 7200, then add
a choice of two sickle options: new high-capacity sickle with new spring hold downs
and guards or SCH sickle with standard roller guides. Its full-fingered auger with 7-in.
(178 mm) flighting ensures smooth crop flow out to its maximum 35-ft. (10.6 m) header
width. The HCC reel provides greater strength with increased visibility. Available in 20’
(6.0 m), 25’ (7.6 m), 30’ (9.1 m) or 35’ (10.6 m).
SCH fully enclosed epicyclic
sickle drive provides a smooth
linear movement that reduces
stress, wear and vibration for
better cutting performance.
WOrK better
bY WOrKing tOgetHer
We believe harvesting is a system, changing from farm to farm, region to region. With that philosophy,
we’re not chained to any particular technology. Our commitment is to give you and your dealer the
choice of several header options to suit your needs while getting the job done right.
Gleaner headers have been redesigned from the ground up with the specific purpose of starting the
controlled flow of crop material before it reaches the feed elevator. At the same time, while recognizing
the importance of speed and convenience.
Today’s Gleaner headers now feature single-lever, multi-coupler connections that get you on and off, quickly.
All electrical and hydraulic
connections are included in the
single-point multicoupler for
quick and clean hookup.
neW MODeL 9250 DYnAFLeX
DrAPer HeADers
With an up to 40’ (12.2 m) cut, the DynaFlex™ allows you to
take more crop efficiently to optimize combine capacity and
reduce operator fatigue. The fully flexible, cab controlled
cutterbar with up to 8” (203 mm) of vertical travel allows
you to take crop right at ground level. The drapers belt slats
are reinforced with fiberglass and have v-belt guides for
consistent, even tracking. Mechanically driven drapers and
cutterbar offer more torque and no requirement of a separate
hydraulic system
r6 SERIES TRANSVERSE ROTOR COMBINES
service WitH
YOU in MinD
The Gleaner combine is backed by the strength and reputation of one of the world’s largest farm
equipment manufacturers–AGCO Corporation. Local AGCO Gleaner dealers support each combine
with experienced, factory trained staff and service personnel.
The GleanerGuard™warranty is the best in the industry from header to spreader. Nonconsumable
parts found to be defective in workmanship or material as delivered will be repaired or replaced for
two years from date of delivery to the initial owner regardless of the number of hours the machine
has been used. Optional 1-year or 2-year extended comprehensive warranty packages are available.
The AGCO parts supply network offers a complete line of high-quality replacement parts and
accessories. The AGCO live-on-net Electronic Parts & Service Information provides immediate
online access for dealers worldwide to operator manuals, service manuals and service bulletins,
further improving their response time and knowledge base ensuring that your combine is back and
running quickly.
Gleaner dealers can provide Gleaner owners with access to www.agcopartsbooks.com. This gives
Gleaner owners 24-hour access to online parts information for their Gleaner combines.
FinAncing
AGCO Finance remains committed to agriculture and understanding its unique needs—like the
need to offer flexible programs such as seasonal payments, skip payments and waiver periods. We
are proud to offer affordable, comprehensive equipment financing options for all Gleaner combines.
We have the expertise, systems and flexibility to design a financing program that’s as tailored to your
needs as your new Gleaner combine is.
r6 SERIES TRANSVERSE ROTOR COMBINES
Make / Model
Gleaner R66
Gleaner R76
VI
VII
GENERAL
Make / Model
Gleaner R66
Gleaner R76
CROP RESIDUE DISPOSAL
Class size
FEEDING SYSTEM
Chain size
Variable speed drive
Feed reverser
#557 serrated
#557 serrated
Available
Available
Electro-hydraulic
Electro-hydraulic
Housing width in. (mm)
39 (914)
39 (914)
Lateral tilt
Available
Available
THRESHING /SEPARATION SYSTEM
System
Transverse rotor
Concave type
2 sections with 14 bars
Transverse rotor
2 sections with 14 bars
Concave wrap
98°
98°
Rock protection
Available
Available
Diameter in. (mm)
Length in. (mm)
Degree of separation
Speed, low-range rpm
Speed, high-range rpm
Chrome, reversible
Chrome, reversible
25 (635)
25 (635)
88 (2,235)
88 (2,235)
360°
360°
200 - 524
200 - 524
418 - 1,096
Concave /grate area in (m )
2
2
Separating area in2 (m2)
418 - 1,096
847 (0.54)
847 (0.54)
4,612 (2.97)
4,612 (2.97)
2 speed
Hydraulic, Variable speed
Hydraulic, Variable speed
Hydraulic chaff spreader
Optional
Optional
AGCO SISU POWER
84 CTA
AGCO SISU POWER
84 CTA
Displacement in3 (L)
513 (8.4)
513 (8.4)
No. of cylinders
6 / inline
6 / inline
HP @ 2,100 rpm SAE (Kw)
300 (223)
350 (261)
Fuel tank capacity gal (L)
150 (568)
150 (568)
ENGINE
Model
DRIVE /PROPULSION SYSTEM
Hydrostatic transmission
Tread width standard / reversed in. (m)
4 speed
4 speed
Spur gear S-41
Spur gear S-41
120 / 145 (3.05 / 3.68)
120 / 145 (3.05 / 3.68)
Steering Axle
Tread width adjustable axle in. (m)
119 / 143 (3.02 / 3.65)
119 / 143 (3.02 / 3.65)
Tread width RWA in. (m)
126 / 144 (3.20 / 3.65)
126 / 144 (3.20 / 3.65)
Dual cylinder
Dual cylinder
270 (6.85)
270 (6.85)
Steering type
Turning radius in. (m)
HYDRAULIC SYSTEM
Hydraulic pump
Control valve
CLEANING SYSTEM
Cleaning stages
2 speed
Straw spreader, standard
Final drive type
Rotor /Cylinder / Threshing
Bars, type
Chopper
Tank capacity gal (L)
Gear
Gear
Electro-hydraulic
Electro-hydraulic
6 (22.7)
6 (22.7)
2
2
Chaffer area in2 (m2)
3,889 (2.51)
3,889 (2.51)
CAB AND CONTROLS
Sieve area in (m )
3,397 (2.19)
3,397 (2.19)
Seat
Luxury / air ride
Luxury / air ride
7,729 (4.99)
7,729 (4.99)
Steering wheel
Tilt / telescope
Tilt / telescope
Transverse
Transverse
2
2
Total area in2 (m2)
Right hand console
Right hand console
Interior volume ft3 (m3)
121.4 (3.44)
121.4 (3.44)
Glass area ft3 (m3)
61.2 (5.69)
61.2 (5.69)
12
12
Transport height in. (m)
141 (3.58)
141 (3.58)
Length w/o header in. (m)
339 (8.61)
339 (8.61)
14 (356)
Wheelbase in. (m)
134 (3.40)
134 (3.40)
4.0 (141)
4.0 (141)
Base weight with tires lb (kg)
27,600 (12,500)
28,500 (12,800)
275 (6.985)
275 (6.985)
23.5 (596.9)
23.5 (596.9)
Discharge height in. (m)
185.5 (4.712)
185.5 (4.712)
Clearance height in. (m)
169.5 (4.305)
169.5 (4.305)
Cleaning fan
Speed rpm
Diameter in. (mm)
1,150
11 (279)
1,150
11 (279)
Controls
GRAIN-HANDLING SYSTEM
Field lights
Tailings return
DIMENSIONS
Tank capacity bu (L)
Diameter in. (mm)
Unload rate bu /sec (L / s)
Length from centerline in. (m)
Standard
Standard
300 (10,572)
330 (11,629)
14 (356)
Ground clearance in. (mm)
r6 SERIES TRANSVERSE ROTOR COMBINES
Let’s get stArteD
The best way to see if you’re ready for a new R6 Gleaner combine is to see one in action. Contact your
dealer or visit us at www.agcoiron.com to see video of the R6 and even arrange to try one for yourself.
We want your experiences with us to be pleasant, so please tell us what information and insight you
may need when comparing machines. After all, while the Gleaner is built with the farmer in mind,
our company is too.
r6 SERIES TRANSVERSE ROTOR COMBINES
AGCO • 4205 River Green Parkway, Duluth, GA 30096 • Fax 770.813.6038 • www.agcoiron.com
AGCO may at any time, and from time to time, for technical or other necessary reasons, modify any of the data, specifications or warranty of the products
described herein. Some equipment shown may be optional. Attention: Photographs in this publication may show protective shields or guards open or
removed for the purposes of illustration. Be certain all shields and guards are in place during operation.
AGCO & Gleaner are registered trademarks of AGCO Corporation • © 2009 AGCO Corporation • GL009508 (08) 5 LCP