SIDELOADERS WITH SUPERIOR LIFTING CAPACITY«

»SIDELOADERS WITH SUPERIOR LIFTING CAPACITY«
COMPANY
Modern, effective and safe technology
…if HAMMAR is written on
your sideloader, you are safe.
Year after year.
Hammar Maskin – a reliable company
Why choose a HAMMAR?
Hammar Maskin is a reliable company which has always grown
by its own means. This provides the company and its customers and suppliers with a sound financial base. They can feel
safe in the knowledge that Hammar Maskin will continue to be
a reliable partner. Thanks to its good solvency, Hammar Maskin
has succeeded in obtaining the highest credit rating – AAA
– from Dun & Bradstreet (Soliditet), for no less than 13 years,
of which eight were consecutive.
With almost 40 years in the industry, made to order and
experience of customers’ needs across the world, we dare
to promise quality, safety and service.
HAMMAR Twinlock
– an example of our patented technology.
HAMMAR sideloaders are found all over the world and operate in all environments.
2
But why choose a sideloader instead of old-fashioned crane
technology or fork-lift trucks? The answer is simple: time,
safety and costs.
When a vehicle comes to the terminal with its container,
unloading should start – vehicles standing around cost money.
So why wait for a crane, truck or perhaps have to uncouple a
trailer? With a HAMMAR the driver him or herself unloads the
freight in a few minutes and is then able to drive away. This
means that s/he does not need other people to unload a
container from his or her vehicle.
We provide proven and reliable technology which rationalises container handling and makes it more effective, no matter
where you wish to transfer or transport them. That is why we
have over 70% of the world market. That is why you choose a
HAMMAR.
DOLOR IPSUM MODELS
ASIMET
DOLOR IPSUM ASIMET
Choose a model to suit your requirements
Range
An extension on the upper
crane arms increases the
outreach when you have
to reach far.
...with telescopic or combination chassis, you always
make full use of the short
and flexible chassis.
Why choose the 150 Series?
The HAMMAR 150 Series is a combination of the latest technology
and a wealth of experience. It has been developed with the focus
on lifting capacity and flexibility. The 150 Series has the highest
lifting capacity in our range, starting at 36 tonnes in the basic
design and available with a full 42 tonnes of capacity. The most
powerful sideloader in the world! It has capacity to stack two fully
loaded High Cube (9’6”) containers on top of each other and this
permits you to lift containers to and from even low chassis and
railway wagons with ease. If you prize strength and flexibility, a
HAMMAR in the 150 Series is the obvious choice.
Telescopic / Combined
Standard
With a HAMMAR 151/152 C, F or
T, with a telescopic or combination
chassis, you always make full use of
the short and flexible chassis. You are
short in 20’ position, which means
that you fit into a tight space. As an
option, you can select 45’ capacity.
HAMMAR 151 HS 20’-40’ with a fixed
chassis and a lifting capacity of 36
tonnes. You get the most powerful
sideloader in our range. It also stacks
HC containers (9’6”) simply and safely.
Naturally, without needing to shorten
the chains.
• Always optimum chassis length
• Extremely short in 20’ position
• Flexible chassis designs
Megalifter
This HAMMAR 151 HC takes 20’-60’ and lifts 42 tons!
151 HC in 20'-position
• Maximum lifting capacity
• Flexibility
• Unrivalled stacking ability
• Superb reliability
151 HC in 40'-position
151 S / HS in 20'-position
4
4
151 S / HS in 40'-position
150 SERIES
Unrivalled flexibility, safety and capacity
The HAMMAR 150 Series
has been developed with
the focus on lifting capacity
and flexibility for all types of
container handling.
Always on your way
With Model 151 or 152 you only
load from or over to another vehicle
or trailer – and you are on your way
again.
Extra range
The 150 Series has extra crane
outreach to allow you to stack 9’6”
containers even in a tight space.
Rapid and reliable, without the need
to shorten the chains.
Load from the ground
With a sideloader you put the container on the ground, drive in with the
fork-lift truck and unload. Could it be
any simpler or safer?
Stacks high cubes
safely and smoothly
Complete safety when you are
stacking – always four points of
support with extra stabilizers. In
addition, never any need to shorten
the chains in order to be able to
stack. Perfect in confined spaces.
Flexible solutions
With the flexible stabilizers you get
closer and can lift between trailers
safely and with high precision.
Simple lifting from
railway
Adequate capacity
Capacity and safety to lift and
transport two 20’ containers.
6
Simple to lift containers to and from
railway wagons. The flexible stabilizer with a small footprint can be
placed both on the ground and on
the railway wagon.
SAFETY.
DOLOR IPSUM ASIMET
QUALITY.
SERVICE.
DOLOR IPSUM ASIMET
We keep our promises
Hammar Service
Safety, quality and service are
values which have underpinned
Hammar’s development since
the outset in 1974.
Not just empty words
We promise maximum safety, top quality and best service. These are values which have underpinned
Hammar’s development since the outset in 1974. But without substance they are just empty words.
Therefore we have summarised the main features in 15 points. Please feel free to compare us with
other alternatives.
Safety:
Quality:
Service:
• Double hydraulic safety provides safe lifting
• Swedish quality; made to order
• Service network across the world
• Lifting stops if the stabilizers are not
extended
• Swedish high-strength steel
• Skilled technical service
• Low tare weight = higher payload
• Roll and tilt-safe with long stabilizer outreach
• High second-hand value, we trade in
second-hand HAMMARs
• You can contact us at any time for a quick
answer
• Safe lifting; always four points of support
when stacking
• Tried and tested, user-friendly technology
Safety
Always safe lifting with long outreach on stabilizers.
8
8
Quality
The fully automatic laser cutting machine, a major investment,
provides precision-cut steel parts and reduces costs.
• Wear resistant technology and simple to
service
Quality
All cylinders have OC valves and radial bearings for perfect
operation and safety.
• Clear information via short decision paths
• Rapid and reliable supplier of spare parts
Service
Spare parts and skilled personnel who can advise you are never
far away.
OPTIONS
DOLOR IPSUM
ASIMET&
ACCESSORIES
DOLOR IPSUM ASIMET
Solutions for all environments
Power take off (PTO)
Central lubrication
Can be factory-fitted on your HAMMAR. Low
lubrication and maintenance costs. Reduced
wear and tear – increased service life.
Naturally all our models can be
specially adapted to take account
of your needs and requirements.
Separate engine
Should you need a separate power pack on
your HAMMAR, we have reliable 80hp (60 kW)
environmentally-friendly engines available.
Adapted to your requirements
Twinlock
We do not have a standard solution for everything. We custom build in accordance with
your specific requirements – it is best like that. If you need to drive on really bad roads,
we equip your sideloader with a Centerpoint bogie. If you need a low vehicle to get under
bridges, we supply your HAMMAR with a Gooseneck chassis. We comply with your
country’s legislation. And among our accessories you will find solutions and help for any
problems which may arise. That is a promise.
ADR
For haulage of hazardous goods, we
provide ADR equipment which complies
with all classes.
10
10
Radio control
Choose between single or two-handed radio.
Both control all the functions and cut loading
and off-loading times significantly. Simple
pictograms show the functions.
The radio can be connected/
disconnected in one simple
operation. Our cable control
is always included in the
delivery.
HOPE
HAMMAR Optical Positioning Equipment shows
the driver when s/he is in the correct position to
lift the container.
With technology and design
from our safety hooks, we have
made the simplest, safest and
lightest lock to connect two 20’
containers.
Centerpoint bogie
Ultra wear-resistant sideloaders
with Centerpoint bogies, developed for really tough road
conditions.
Safety Hooks
HAMMAR’s patented forged
steel safety hooks are very small
and make the driver’s work
easier. It is impossible for them
to fall out of the corner castings
during lifting.
Gooseneck chassis
No matter where you are – with
our Gooseneck chassis you
meet all height regulations in
the world.
We equip your vehicle with power
take off as standard; the optimum
solution for the highest reliability, service and economy. The
hydraulic system with PTO has
a very low tare weight and minimum diesel consumption.
HAMMAR across the world
B15GB
Hammar Maskin AB
SE-517 95 Olsfors, Sweden
Tel +46 33 29 00 00
Fax +46 33 29 00 01
[email protected]
www.hammar.eu
Hammar Australia Pty Ltd
Sydney, Australia
Tel +61 2 4577-7700
Fax +61 2 4577-7711
[email protected]
www.hammar.com.au
Hammar New Zealand Ltd
Auckland, New Zealand
Tel +64 9 488 99 80
Fax +64 9 488 99 84
[email protected]
www.hammar.co.nz
Hammar Malaysia Sdn Bhd
Port Klang, Malaysia
Tel +60 3 3165-6111
Fax +60 3 3165-1188
[email protected]
www.hammar.com.my
Hammar Lift, Inc.
Laguna Niguel, CA, USA
Tel +1 (949) 716 2513
Fax +1 (949) 716 2514
[email protected]
www.hammarlift.com