Shower Bases - Neo Angle - Acri-tec

Section 16
Table of Contents
Shower Bases - Neo Angle
October 2013
Shower Bases - Neo Angle
34” x 34”
36” x 36”
36” x 36” Saniflo
38” x 38”
38” x 38” Saniflo
40” x 40”
42” x 42”
48” x 48”
48” x 48” Opulance
1
2
3
4
5
6
7
8
9
Acri-tec Industries Corp.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 | Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 1 of 9
Shower Bases-Neo Angle
October 2013
61011
DESIGN FEATURES
34” x 34” Neo Angle
Shower Base
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜” shower drain opening
• Shower base trimed to fit 34” x 34” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T34 (Section 19, Page 1)
SHOWER BASE DIMENSIONS
15 1/2”
25 1/2”
34”
34”
34”
15 1/2”
7”
10”
10”
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 2 of 9
Shower Bases-Neo Angle
October 2013
61021
36” x 36” Neo Angle
Shower Base
DESIGN FEATURES
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜” shower drain opening
• Shower base trimed to fit 36” x 36” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T36 (Section 19, Page 1)
CPV30136 (Section 19, Page 2)
SHOWER BASE DIMENSIONS
17 1/2”
25 1/2”
36”
36”
35 3/4”
17 1/2”
7”
12”
12 3/8”
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 3 of 9
Shower Bases-Neo Angle
October 2013
61022
DESIGN FEATURES
36” x 36” Saniflo
Shower Base
Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
Standard 3 ⅜” shower drain opening
Shower base trimed to fit 36” x 36” rough
opening
Integral tiling flange for easy installation
Floor of the base is elevated to allow room
to install the shower drain plumbing
No door available
OPTIONS
Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
SHOWER BASE DIMENSIONS
18 1/2"
24 1/4"
36”
9 1/2"
18 1/2"
13 1/2"
13 1/2"
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 4 of 9
Shower Bases-Neo Angle
October 2013
61030
DESIGN FEATURES
38” x 38” Neo Angle
Shower Base
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜” shower drain opening
• Shower base trimed to fit 38” x 38” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
Compatible Shower Doors:
9731T38 (Section 19, Page 1)
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
SHOWER BASE DIMENSIONS
19 ¾"
25 ¼"
38"
38"
38"
6"
19 ¾"
14”
14"
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 5 of 9
Shower Bases-Neo Angle
October 2013
61031
DESIGN FEATURES
38” x 38” Saniflo
Shower Base
Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
Standard 3 ⅜” shower drain opening
Shower base trimed to fit 38” x 38” rough
opening
Integral tiling flange for easy installation
Floor of the base is elevated to allow room
to install the shower drain plumbing
OPTIONS
Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
SHOWER BASE DIMENSIONS
20 1/2"
24 1/4"
38”
9 1/2"
20 1/2"
15 1/2"
15 1/2"
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 6 of 9
Shower Bases-Neo Angle
October 2013
61032
40” x 40” Neo Angle
Shower Base
DESIGN FEATURES
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜” shower drain opening
• Shower base trimed to fit 40” x 40” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T40 (Section 19, Page 1)
SHOWER BASE DIMENSIONS
21 ¾"
40"
25 ¼"
40"
40"
6"
21 ¾"
16”
16"
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 7 of 9
Shower Bases-Neo Angle
October 2013
61042
DESIGN FEATURES
42” x 42” Neo Angle
Shower Base
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜" shower drain opening
• Shower base trimed to fit 42” x 42” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T42 (Section 19, Page 1)
SHOWER BASE DIMENSIONS
23 ¾"
25 ¼"
42"
42"
42"
6"
23 ¾"
18”
18"
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 8 of 9
Shower Bases-Neo Angle
October 2013
61042
48” x 48” Neo Angle
Low Profile Shower Base
DESIGN FEATURES
• Acrylic shower base constructed of cast
high
gloss acrylic and reinforced with a fibreglass
backing
• Standard 3 ⅜” shower drain opening
• Shower base trimed to fit 48” x 48” rough
opening
• Integral tiling flange for easy installation
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T48 (Section 19, Page 1)
SHOWER BASE DIMENSIONS
29 ¾”
25 ¼”
48”
48”
48”
4 1/2”
29 ¾ ”
24”
24”
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com
Section 16
Page 9 of 9
Shower Bases-Neo Angle
October 2013
61051
DESIGN FEATURES
48” x 48” Opulance
Shower Base
• Acrylic shower base constructed of cast high
gloss acrylic and reinforced with a fibreglass
backing
• Can be jetted with water or air jetting sytems
• Standard 3 ⅜” shower drain opening
• Integral tiling flange for easy installation
• Shower drains are not included
OPTIONS
• Available in:
White
*1 year limited manufacturer’s warranty included
*Note: Shower base may not be exactly as pictured
Compatible Shower Doors:
9731T48 (Section 19, Page 1)
SHOWER BASE DIMENSIONS
48”
Location
of Drain
17”
Flange 1”
25 1/2”
7 1/4”
4”
14”
11”
28”
28”
27”
*Diagram is not to scale
This shower base complies with CSA Standards
*Shower Drains are not included
All measurements + 1/4”
In keeping with our policy of continuing product improvement, Acri-Tec Industries Corp., reserves the right to change product specifications without notice.
27049 Gloucester Way, Langley, B.C. V4W 3Y3 |
Acri-tec Industries Corp.
Tel : 604.607.0856 Fax : 604.607.0857
[email protected] | www.acritec.com