the chas. g. burch times

The
Chas. G. Burch
Times
A PUBLICATION OF THE CHAS.
G. BURCH SUPPLY COMPANY
Serving our Community, Since 1890!
760 State Street, Schenectady, New York, 12307
518-346-1293
September 2013
VXT-24 WATER FEEDER $191.56
GALAXY
™
24 VAC Upon a feed signal from low
water cut-off, the VXT feeder delays (from 30 seconds to 10 minutes) to allow condensate to
return to boiler. If make-up water is required after the delay period, the VXT will initiate a feed
cycle. The VXT can be set to feed to the level of the low water cut-off or can be set from 1 to 5
gallons to raise the water level above the cut-off to the normal operating level. The digital feed
counter tracks all water fed into the boiler including water added using the Manual Feed Button.
High performance gas steam boilers.
Built for superb performance and long life.
Slant/Fin’s Galaxy is one of America’s most trusted gas boilers. Installed
in tens of thousands of homes, Galaxy is the choice of experienced
heating professionals everywhere. For homeowners, it’s the wise choice
for long-term efficiency and reliability.
Fuel saving performance with traditional cast-iron boiler design
We’ve fine-tuned natural draft cast-iron boiler technology to its most
advanced state. With AFUE ratings to 83.4%, Galaxy keeps fuel costs
low. It doesn’t rely on complex technologies or exotic materials for its
efficiency, so there’s less to pay for now and less to go wrong. While other boilers become subject to performance and breakdown problems
over the years, you can count on Galaxy for efficient, trouble-free
performance.
GXHA-100EDPZ-$1599.95
GXHA-120EDPZ-$1698.95
400 LOW WATER CUT-OFF
$146.95
24 VAC Burner circuit
contacts open after 15 second delay in a low water condition. Delay prevents short cycling caused
by momentary fluctuations in the boiler water level. Automatically reactivates burner circuit 30
seconds after water reaches the probe, allowing optional water feeder to raise water level above
the probe.
GXHA-160EDPZ-$1999.95
24 24 VAC- 170 120 VAC LOW WATER CUT-OFF $81.65
Interrupts power immediately in a low water condition. Heavy duty construction. Automatically
restarts burner on return of normal water level. Provides contacts for optional low-water alarm.
SENTRY
TM
High performance, cast-iron gas hot water boiler. Lower profile makes
installations easy. The boiler you choose for your home now will affect your
family’s comfort and pocketbook for many years to come. Sentry boilers provide a blend of efficiency and reliability that will keep your home
comfortably warm and your fuel costs low year after year. A new Sentry
boiler can save up to 30% or more on fuel bills compared to a typical old
boiler operating at 60% efficiency. Sentry is ideal for a wide variety of gas
boiler requirements as a replacement or for new installations. Its advanced
design provides years of trouble-free, high efficiency operation, while
providing easy installation especially in sites with low chimney connections
or low overhead clearance. Sentry is a reliable natural draft boiler. Sentry’s heat exchanger is made of quality cast-iron and assembled with durable
metal push nipples. It's so reliable it comes with a lifetime limited warranty.
And, Sentry boilers respond quickly to your thermostat’s call for S-90 EDP-$1368.00
S-120 EDP-$1489.50
S-150 EDP-$1639.95
1100 24 VAC MINI LOW WATER CUT-OFF $78.46
Interrupts
power immediately in a low water condition. Automatically restarts burner on return of water level.
Features test button, onboard indicating lights
and easy to follow installation instructions. Model 1100 includes plug-in wire harness with labeled
quick-connect terminals. Model 1100 is available with additional wiring harnesses for popular
boilers.
At Chas. G. Burch, we offer an extensive selection of parts and
controls for your steam or hot water heating system. We can
help you retrofit your boiler with a standing pilot system, cut
a gauge glass, provide proper steam valves or traps, or
identify and replace your gas valve. We also carry a full array
of boiler treatments, conditioners and sealers. Give us a try.
turn over for more news
DRAINAGE / WATER SERVICE
BURCH IS GOING
UNDERGROUND!
Innsbrook Traditional Direct-Vent
Fireplace Inserts


Stainless Steel Slope Glaze Burner, Ceramic Fiber Log
Set, Louvers, Banded Brick Liner, Blower
Choose Millivolt and Intermittent Pilot (with Remote)



Choose Small (25,000 Btu), Medium (33,000 Btu), or
Large (35,000 Btu)
Provides heat during power outage
Requires Surround
DV-25-IN-33L Insert with S25-3BL
Surround-
WE NOW ARE STOCKING A SELECTION OF PIPE AND
FITTINGS FOR YOUR UNDERGROUND PROJECTS. SDR
35 FITTINGS AND SDR 26 PIPE.
SDR26 4”X14”-$20.86
SDR35 FITTINGS4” 90 DEGREE ELBOW-$9.28
4” 45 DEGREE ELBOW-$7.37
4” CO ADAPT W/PLUG-$5.69
4” WYE-$12.70
4” TEE-$11.93
4” TEE WYE-$14.18
4” STREET 90-$8.52
4” STREET 45-$6.63
4” 22 DEGREE ELBOW-$7.34
4” 22 DEG. STREET ELL-$7.01
PIPE LUBE-$6.90
BURCH EVERYDAY PRICE $1573.20
Need a gas fireplace? Tired of paying
full or exaggerated list prices at a
Stove Shop?
Just give us a try. Direct vent,
Inserts, Vent free, Gas Logs Only,
Freestanding?
Yup. We Can Get Them.
Ford Meter Box offers the widest variety of couplings and fittings
in the water works industry. The Pack Joint offers a balanced
design on every type of pipe. The Grip Joint is a one-step fitting
that is interchangeable with the Pack Joint. The Quick Joint is a
one-step fitting that is available on a wide variety of Ford products.
Just stab the copper or plastic tubing into the fitting and tighten
down the compression nut to the stop.
We carry an assortment of FORD FITTINGS FOR YOUR
WATER SERVICE NEEDS. WE ALSO STOCK TYPE K COPPER
TUBE IN BOTH ¾” AND 1” SIZES. CALL US FOR A QUOTE ON THESE PRODUCTS. WE ALSO CARRY CURB BOXES
AND RODS AND ALSO SELL OR RENT CURB KEYS.
95% Two Stage Gas Furnace
Our two stage furnace is designed for maximum convenience and optimum comfort. A
conventional single stage furnace operates at high heat until the thermostat is satisfied, then it
shuts off until there's a demand for heat again. As a result the furnace is constantly cycling on and
off. But with a two stage furnace, these temperature swings are virtually eliminated and your
home stays at the comfort level you select.
Most of the time, a two stage furnace operates in the low stage, delivering a gentle yet steady
flow of heated air. When the weather turns really cold, the furnace automatically shifts into the
high stage, providing the extra heat needed to keep the home at the desired comfort level.
Whenever the furnace is in the low stage, energy is saved because the burner flame is smaller and
the blower fans runs at a slower speed. Even in the high stage, with AFUE rating of 95%, utility
costs are being saved.
The ECM variable speed blower motor adjusts the blower speed to deliver the airflow required by the system, resulting in more
even temperatures than a single speed motor can provide. And because air is constantly being drawn across the filter, indoor air
quality and humidity control are enhanced.
The primary and secondary heat exchangers are covered by a limited lifetime warranty; other components are covered for 12
years. (Limitations apply; see "Warranty" for details)
FEATURES
Quiet Operation—Sealed door and cabinet insulation locks in heat and sound; sealed vestibule reduces burner and inducer
sound levels; ECM blower motor makes this one of the quietest furnaces on the market
Extraordinary Efficiency—Two heat exchangers deliver 95%+ of the heated air to the home; the ECM blower motor may
give up to 1 SEER point gain in cooling efficiency
ECM Blower Motor—Runs at a variety of speeds to match the load demand, for efficiency and quiet operation; constant airflow
through a wide variety of ductwork conditions reduces temperature stratification while improving indoor air quality
Hot Surface Igniter—Silicon nitride type igniter is automatic, eliminating the need for a standing pilot light
Designed for Long Life—Primary heat exchanger is made of heavy gauge aluminized steel and secondary heat exchanger is
made of stainless steel; cabinet is steel with corrosion resistant finish
Thermostat—Can be used with either a single or two-stage thermostat; two stage is recommended for optimal efficiency (not
included with furnace)
Qualifies for National Grid High-Efficiency Heating Equipment rebate of $420.00.
Contact NATIONAL GRID FOR MORE INFO. CALL US FOR PRICING AND AVAILABILITY.
TURN OVER FOR MORE
TOO HOT or COLD TO
SLEEP!
TIRED OF CARRYING THAT
WINDOW UNIT IT IN AND OUT?
Tired of one room being the
problem? Hot Spots, Cold
Spots?
TOO MUCH NOISE?
PUT AN END TO THAT NOISY
WINDOW A/C.
MINI-SPLITS PROVIDE COOLING
ONLY OR COOLING AND HEATING TO
ROOMS WITHOUT THE NEED FOR
DUCTWORK. SUPER QUIET, THESE HIGH
EFFICIENCY UNITS ARE COST
EFFECTIVE AND EASY TO INSTALL.
9,000 BTUH COOLING ONLY, 13 SEER- $598.60
12,000 BTUH COOLING ONLY, 13 SEER -$654.95
9,000 BTUH HEAT PUMP, 13 SEER$663.60
12,000 BTUH HEAT PUMP, 13 SEER$755.90
9,000 BTUH HEAT PUMP, 19 SEER$944.40
12,000 BTUH HEAT PUMP, 19 SEER$1052.30
LOOKING FOR ANY OF THESE
PRODUCTS?
WE ARE A STOCKING DISTRIBUTOR
OF MOEN PRODUCTS AND RECENTLY
ADDED KOHLER TO OUR PRODUCT
OFFERINGS.
CALL US FOR PRICE AND
AVAILABILITY ON THESE PRODUCTS.
TWO THINGS TO REMEMBER,
FIRST, THESE PRODUCTS WHEN SOLD AT A HOME
CENTER OR BIG BOX ARE NOT THE SAME PRODUCT
AS OFFERED IN A PLUMBING SUPPLY STORE. THE
QUALITY IN A HOME CENTER IS DOWNGRADED AT
THE REQUEST OF THOSE BUSINESSES.
SECOND, PURCHASES MADE ON THE INTERNET DO
NOT STRENGTHEN YOUR LOCAL ECONOMY, OR
GIVE YOU AN OPPORTUNITY TO GET ADVICE ABOUT
THE PRODUCT, ITS PROBLEMS, OR HOW TO INSTALL
THEM, IF NEEDED. THIS HAS IMMEASURABLE VALUE.
PLEASE SHOP LOCAL AND HELP REBUILD THESE
UNITED STATES OF AMERICA.
Don’t forget our website!
www.cgbsupply.com
Please continue to support the