Fabtech PLUSeries Adhesives Information Sheet
Transcription
Fabtech PLUSeries Adhesives Information Sheet
+PLUSeries® Adhesives fabtech systems PRODUCT INFORMATION SHEET The + PLUSeries System comes with everything you need, 220ml & 50ml cartridges, application tips and dispensing guns. Product Information 1.220ml adhesive cartridges are sold 6ea to a case. Adhesive can be purchased in individual quantities. 2.50ml adhesive cartridges are sold 12ea to a case. Adhesive can be purchased in individual quantities. 3.Static mixing tips are sold in quantities of 6, 72 and 144ea per bag. 4. Dispenser guns are sold 1ea. Engineered To Exceed Your Expectations Fabtech Systems +PLUSeries® 25, 60, 90 second and Composite structural adhesives are a versatile and fast two-part urethane system used for bonding and repairing plastics, composites, aluminum, steel, plaster and nearly anything you can think of commonly used in the O&P manufacturing process. Because it’s a structural adhesive, it is significantly stronger than brittle, fracture prone acrylics commonly used in our industry today. These urethanes are so strong you can even drill and tap them! We’re confident you’ll never want to use smelly toxic acrylics again. +PLUSeries® 25 Second Adhesive +PLUSeries® 60 Second Adhesive 25 Second Cartridge Adhesive System is the fastest curing 2-component urethane known to be on the market. This urethane product is so fast it can often replace Cyanoacrylate “tacking” adhesives. Use this adhesive when you need your job done fast! 60 Second Cartridge Adhesive System is our most popular adhesive. The 60 second adhesive gives you all the same features as the 25 second product, but more working time, and it is still incredibly fast! Use this adhesive when you need just a little bit more working time. +PLUSeries +PLUSeries® ® Features: Features: • Tan color • Tan color • High-strength • High-strength • Structural adhesive • Structural adhesive • Resistant to elevated temperatures, moisture, most solvents and chemicals • Resistant to elevated temperatures, moisture, most solvents and chemicals • 25 Second working time • 60 Second working time • 50ml and 220ml sizes • 50ml and 220ml sizes Item #: Description: Item #: Description: 25SS 50ml 25 Second Adhesive 60SS 50ml 60 Second Adhesive 25SL 220ml 25 Second Adhesive 60SL 220ml 60 Second Adhesive www.fabtechsystems.com © 2010 Fabtech Systems, LLC. All Rights Reserved. Phone: 800.FABTECH | Fax: 425.349.9559 +PLUSeries® Adhesives fabtech systems PRODUCT INFORMATION SHEET +PLUSeries® Composite Adhesive +PLUSeries® 90 Second Adhesive +PLUSeries® Composite Adhesive is a two-part black pigmented urethane adhesive designed for structural bonding of today’s high performance composite sockets and bracing systems used in O&P. Combined at a 1:1 ratio like our other PLUSeries products, it has a working time of one minute. As fast as our 60 Second products, our Composite adhesive requires little to no surface preparation while providing high strength and excellent fatigue endurance as well as superior toughness! Because of its black pigmentation, it’s the perfect choice to use on carbon devices! If 60 Seconds is not enough, then 90 seconds should be just right! +PLUSeries® 90 Second Cartridge Adhesive System gives you all the same features as the 25 and 60 second products, but more working time for some of those jobs that may require more time. Features: • Tan color • High-strength • Structural adhesive Features: • Resistant to elevated temperatures, moisture, most solvents and chemicals • Black color • High-strength • 90 Second working time • Structural adhesive • Only available in 220ml size Item #: Description: 90SL 220ml 90 Second Adhesive • Resistant to elevated temperatures, moisture, most solvents and chemicals • 1 Minute working time • 50ml and 220ml sizes +PLUSeries® Mixing Tips 50ml Disposable 50ml mixing tips sold in bags of 6ea, 72ea and 144ea. Item #: Description: C1SS 50ml Composite Adhesive C1SL 220ml Composite Adhesive +PLUSeries® 50ml Dispensing Gun Features: 50ml Dispensing Gun • Easy to apply locking hub design • Tapered end for precise placement of adhesives Features: • Disposable • Easy to use design • Works with any 1:1 50ml size cartridge Item #: Description: 169506 50ml Mixing tips package of 6ea 169572 50ml Mixing tips package of 72ea Item #: Description: 1695144 50ml Mixing tips package of 144ea G50 50ml Dispensing Gun • One time purchase +PLUSeries® Mixing Tips 220ml +PLUSeries® 220ml Dispensing Gun Disposable 220ml mixing tips sold in bags of 6ea, 72ea and 144ea. 220ml Dispensing Gun Features: Features: • Easy to apply locking hub design • Easy to use design • Tapered end for precise placement of adhesives • Works with 200ml and 220ml cartridges • Disposable • One time purchase Item #: Description: 127216 220ml Mixing tips package of 6ea Item #: Description: 127272 220ml Mixing tips package of 72ea G220 220ml Dispensing Gun 1271144 220ml Mixing tips package of 144ea Phone: 800.FABETCH | Fax: 425.349.9559 © 2010 Fabtech Systems, LLC. All Rights Reserved. www.fabtechsystems.com