SSI Microprint.cdr

Products by
Direct Circuit Imaging using Laser and Digital Light Projection technology
W
NE
• 32,000 DPI
• Inner, Outer & Soldermask
• 1 to 4 Heads
• Simple operation
• Laser Imaging Source
• Proven Light Projection
• Highest Depth of Field
• Non-Smear Optics
• Simple operation
• Superior accuracy
• Numerous applications
• Excellent image quality
• 1° Collimation Angle
With almost forty years of PCB imaging and registration experience, Fabcon is proud to introduce the OLEC Microprint Di
imaging Systems. The Microprint Di uses a Laser based light source with high depth of focus and guaranteed high
performance. The delivered power at the exposure surface will provide quick and effective exposure power for most all LDI,
conventional dry film and solder mask resists. Programmable resolution and speed control provides manufacturing flexibility
to fit most requirements. Our unique imaging technology insures sharp exposed traces and new scrolling method minimizes
edge smearing issues.
ISO 9001
UL
®
®
Fabcon Inc.
1800 East Saint Andrew Place
Santa Ana, CA 92705 USA
Phone (714) 881-2000 Fax (714) 881-2001
www.fabcon.com [email protected]
Brand Imaging Systems
Products by
OLEC products are the leading systems for imaging printed circuit boards & photo etch
Fast and Precise
Microprint Di Specifications
Performance Specifications
Max Image
Throughput
Minimum
Size*
18x20 Panel
Feature
508 x 660 mm 20”x26” app. 60 per hour*
25um
*depending on number of heads, panel size, film and geometry
Microprint Di
System Specifications
LDI, Conventional Dry Film, Solder-Mask
508 x 660 mm (20” x 26”)
N/A
50 um to 10 mm
Standard
Vacuum Bed
Imaging Materials
Max Image Area
Min Image Area
Panel Thickness
Single Sided Print
Panel Position
Laser UV
Wave Lenght
Micro Mirror Device
Collimation
Data Resolution
Laser Life Span
Depth of Focus
Auto Focus
X/Y Position
Theta Correction
Speed/Resolution Optimization
Top/Bottom Registration
Technical Specifications
12 watts
405 nm
0.7” XGA 2xLVDS
1°
0.8 um
7000 Hours
+/-0.3mm from surface of panel
yes
1um, Linear Scale
yes
yes
+/-10 um
Operating Requirements
Gerber 274D/X
Win 7
208-240 1 Phase 50/60 Hz
2950kg (6500 lbs)
File Compatibility
ORS
Electrical
Machine Weight
Low cost of ownership: Eliminates the use of film and associated issue with: film stability and registration issues, film scratching and defects,
film storage and plot times. Increases productivity particularly in a short run environment with minimized set up time for each job. The low cost
and extended life of the laser equates to low operating and service costs.
Instant ON use of light: The laser is only on when commanded to print. No warming up time: As soon as the system controllers have powered
up, and the mechanics have initialized, the system is ready to produce.
Real time scaling and rotation: The Microprint Di generates images in real time. Allowing dynamic adaptation to scaling and rotation of the
substrate in the computer system.
Serialization of boards and sub-panels are also optional.
Specialty Coaters
Dryers UV Cure
Feeders & Stackers
Automated Imaging
Auto Align Imaging
Etch
Circuit
Graphics
UV Roller Coaters
Flexo
Direct Circuit Imaging Computer to Screen
Screen
Fabcon Inc.
1800 East Saint Andrew Pl.
Santa Ana, CA 92705 USA
Phone (714) 881-2000
www.fabcon.com
[email protected]
Digital
Upgradeable: Our modular imaging technology allows different imaging heads to be field upgradable as your requirements change.
Radiometers
Lamps
Lights & Integrators
Semi-Auto Imaging Phototools Large Format