WESCAM Corporate Brochure

COMPANY OVERVIEW
Global Imaging Solutions
Revolutionar y
Imaging & Targeting Performance.
WESCAM’s MX™-Series of multi-sensor and multi-spectral imaging
and targeting systems operate with outstanding stabilization, leading
range-performance and portray clear sighting capabilities across the
visible and infrared spectrum. With thousands of systems fielded world-wide,
WESCAM serves all segments of the airborne imaging market with turrets
operating from fixed-wing, rotor-wing, UAV and aerostat platforms.
Recent developments and adaptations in WESCAM’s technology have
enabled the same exceptional imaging capabilities from ground vehicles
and marine vessels.
WESCAM’S AIRBORNE
SURVEILLANCE & TARGETING
SYSTEMS
Airborne Systems & Capabilities
WESCAM’s imaging and targeting solutions range in
size from 10 to 25 inches in diameter and provide clean,
stabilized full-motion Intel in support of:
•
•
MX-10D
MX-25
MX-25D
Low-altitude tactical surveillance & targeting missions
Medium-altitude covert intelligence, surveillance and
reconnaissance and targeting missions
•
High-altitude, ultra long-range persistent surveillance
and targeting missions
MX-15
WESCAM’s portfolio of airborne turrets features common electronics and cabling,
user interfaces and video overlays, software and internal components. This common
framework is found within all MX airborne turrets, despite their size, and encourages
ease and familiarity of use, simplified turret interchangeability within fleets,
efficiencies in technology enhancements and overall system support.
1
MX-10
MX-20
MX-20D
MX-15D
Contains public sector information licensed under the Open Government Licence v1.0.
2
Ground Systems & Capabilities:
Ground Systems & Capabilities:
WESCAM’s ground-based sighting-solutions have been engineered to actively
support intense Combat Force-Protection, Hunter-Killer and 24/7 perimeter
surveillance missions. Vehicular and stationary solutions include mast mounts
that have been designed with precise stabilization levels, passive isolation, and
MX-RSTA
industry-leading optical-magnification levels. HD resolution and 360° vantage
MX-10GS
points enable long-range covert missions while stationary or on-the-move,
simultaneously providing wide field-of-view situational awareness for combating urban and asymmetric threats.
Solutions incorporate battle-proven MX Series EO/IR imaging technology and operate flawlessly in extreme
temperatures, at excessive speeds, varying altitudes, and through the harshest environments; including those
with intensive dirt, dust and smoke.
Integrator of Leading ISR Communication
Systems
As prime contractor for many multi-million dollar programs,
WESCAM is relied on to provide more than EO/IR systems.
Fitting multi-spectral airborne imaging and targeting
systems with wireless communication equipment,
WESCAM incorporates leading sensor technology with
today’s finest data communications and tactical display
technology, including radar, global positioning
systems,inertial navigation systems and moving maps.
On the ground, L-3 WESCAM offers a complete and flexible
turnkey vehicle reconnaissance and surveillance system
solution which is scalable based on the vehicle’s integration
and mission profile. Components could include a sensor
suite, mast and video exploitation workstation.
Control the Battlespace from
Every Altitude:
Rely on WESCAM to dominate all levels of the battlefield, significantly
increase platform lethality, vehicle survivability and crew protection. Deploy
multiple MX airborne and ground systems in layered ranges and overlapping
fields of view to visualize continuous networked coverage and threat
hand-off between sensors. This capability allows for the uninterrupted
surveillance of borders, forward operating bases,
airfields and other vital assets.
3
Department of National Defence, Reproduced with the permission of the Minister of Public Works and Government Services Canada, 2012.
4
Image courtesy of Austal
Intensify your Mission
Capabilities
Modular and Scalable Sighting
Solutions
From legacy to new platform introductions, technology
enhancements developed and integrated by WESCAM
continue to conquer industry-wide mission challenges:
Modernizing Older Generation Turrets:
Wide Angle Color Low-light: Use the continuous zoom
situational awareness senor under a wider range of
illumination conditions. This sensor complements the
low-light channel in the dual-channel spotter
Visible Laser Designator: Provides conclusive assurance
that designation is on target
Precise Laser Control: Highly stabilized laser allows
refined positioning for effective small munitions
WESCAM’s imaging and targeting systems are modular in design - which easily facilitates system
growth. The modular design of the MX-Series family allows for individual sensors to be upgraded
without affecting other sensors. This flexibility enables:
High Definition IR imagery:
Improved spatial and grayscale
resolution. A vast improvement
to situational-awareness through
a wider field-of-view
Image Fusion/Blending:
Combine EO and IR into a
single image stream, allowing
the operator the benefits of
both sensors at one time
•
The upgrade of existing components to newer technology
•
The addition of new components to increase your system’s functionality
•
A low training burden – common system components and interfaces
•
The best value for smaller budgets - innovative solutions and low “whole life costs”
Laser Spot Tracker:
Acquire and track a
laser designator spot
originating from ground
forces or allied aircraft
Laser Spot Tracker Off
5
Laser Spot Tracker On
6
Use of U.S. DoD images does not imply or constitute DoD endorsement.
Timely Support
Worldwide
Invest In Your Team and Your Country
Training Products and Courses:
WESCAM offers fully-integrated training programs and interactive simulation products to ensure customers are
fully optimizing their MX-Series system.
WESCAM continues to invest
heavily not only in product
development, but also in
customer care. From
single-operator configurations
to complex, multi-operational
systems, the following support infrastructure is in place to support WESCAM’s customers:
MX-Sim:
Empowering users with the knowledge and confidence needed to operate
their MX system to its full potential, the MX-Sim is a training product that
simulates the complete operations of MX-Series imaging and targeting
systems. Designed to match a customer’s exact MX-Series configuration,
the MX-Sim reduces the expensive flying time required to train personnel.
WESCAM Authorized Service Centers (WASCs):
MX-Emulator:
WESCAM has expanded its global footprint by partnering with leading service providers to create strategically located
Authorized Service Centers (WASCs) around the world. WASCs provide support services to ensure operational
availability remains high. WASC technicians are factory trained and certified, and follow WESCAM’s documented
in-house procedures.
Used during the system-integration phase of a program, the MX-Emulator
emulates the complete operations of any MX imaging and targeting
system. It enables system integrators and OEM’s to dramatically reduce System Integration Lab (SIL) development
costs associated with integration activities, while freeing systems and aircraft from SIL testing.
Field Service Representatives (FSRs):
Training:
WESCAM’s FSRs are factory-trained technicians, experienced in performing diagnostics and repairs anywhere in the
world. Available for dispatch within 24 hours from the closest WASC location, FSRs respond rapidly to customer calls
for on-site repairs.
MX-RAid:
Over the Internet
Through either a satellite or internet connection, any MX system can interface with
MX-RAid, a leading diagnostic software tool that performs checks, calibrations,
firmware updates and logs errors from the field. This service reduces delays in
determining and repairing system faults, eliminates no-fault-found returns,
significantly reduces response time results and reduces downtime for the end user.
WESCAM’s comprehensive training solution has been designed to expand the customer’s overall operational and
maintenance knowledge. Training offerings range from in-class instructor-led courses to in-flight and in-vehicle
training, and eLearning product training courses. WESCAM offers training at its state-of-the-art
training center located in Burlington, Ontario, the customer’s location and any
WESCAM Authorized Service Center.
Via Satellite
7
8
State-of-the-art Manufacturing Capabilities
L-3 WESCAM has the operational capabilities in place to support the design and development of
commercial-off-the-shelf EO/IR imaging and targeting systems. With over 200,000 square feet of
floor space, innovative measures have been implemented to foster the design, assembly and support of
new and existing technologies.
Multi-disciplinary teams oversee each product through the development cycle. From initial design
to collaborative developments based on customer specifications, L-3 WESCAM combines engineering
disciplines with state-of-the-art manufacturing capabilities to ensure superior products and total
customer satisfaction.
• Design Engineering • Procurement & materials management
• Manufacturing engineering • Optics and video testing
• Quality engineering • Thermal environmental screening
• Electronics assembly • Vibration test capability
• Mechanical assembly Certified to AS 9100 and ISO 9001 standards, L-3 WESCAM’s practices and products have achieved a standard of quality
that is recognized and respected throughout the world.
Applied Physics Specialties (APS) delivers precision optical solutions that satisfy specific imaging requirements.
Vertically integrated with engineering, design, development, optical and mechanical manufacturing capabilities,
APS takes customers needs from concept to the finished article.
• Opto-mechanical lens assemblies such as telescopes & multi fields of view IR lenses
• High performance polished aspheric lenses
• Diamond turned optical components
APS products span the spectrum from ultra violet to the infra-red for high quality imaging applications in:
• Space • Photo-lithography
• Ground based astronomy • Nuclear Inspection
• Defense • Entertainment
• Integrated Logistics Support (ILS)
• Integration and test
• Optical manufacturing
9
10
WESCAM
Head Office
649 North Service Rd. West
Burlington, Ontario
Canada L7P 5B9
Tel: 1 (800) 668-4355
Fax: (905) 633-4100
Customer Support
After Hours:
(888) 5WESCAM
Email: [email protected]
Applied Physics
Specialties Limited – APS
17 Prince Andrew
Toronto, Ontario M3C 2H2 Canada
Tel: (416) 445-1870
Fax: (416) 445-7977
www.wescam.com
September 2013