Catalog - Performance Screen Supply

Transcription

PRST STD
U.S. Postage
Paid
Permit 64
Colts Neck, NJ
600 PARK AVENUE
MANALAPAN, NJ 07726
ADDRESS SERVICE REQUESTED
(800)659-8337 SAME DAY
www.performancescreen.com
www.youtube.com/performancescreen
Special
$75.00
Attn: Supply Purchaser
2014 CATALOG
with a $250 order.
Prices Accurate as of January 17, 2014
AGGRESSIVELY SEEKING YOUR
SUPPLY & EQUIPMENT BUSINESS!
WE SELL
SUPPLIES:
Damn Good Plastisol Inks
Wood and Aluminum Screens
Camie Spray Adhesives
Bob’s Screen Chemicals
S.E.X. Photopolymer Emulsion
Emulsion Reclaimer
R-Tape Blockout Tapes
Tekmar Spot Cleaning Fluids
Chromaline Capillary Films
Blockout Pens
Rubber Gloves
Heat Tapes
R-Tape Pallet Protek
Screen Mesh and Adhesives
Test Print Squares
PMS Books
Paper Number Stencils
Serilor Squeegees and Handles
Heat Transfer Papers & Supplies
Madeira Embroidery Threads
HV Embroidery Backings
Vellum Papers
Scorch Remover
Toner Aide
...And Much More!
SHIPPING
2LOCATIONS
New Jersey
Salt Lake City
Order Within 30 Days
and Receive MBP
Pricing For 1 Year!
NEW CUSTOMERS GET
$10 OFF
YOUR 1st ORDER!
(Must mention coupon code PW10)
- Discounted Prices
- Money Back Guarantee
- Same Day Shipping
- Free Technical Support
- No Minimum Order
EQUIPMENT:
BBC Flash Cure Units
2
Bob and Kathy Drake, Owners
L O C A T I O N S
New Jersey
Salt Lake City
Serving All 50 States and the World!
DISC VER
Blackline Washout Sinks
Conveyor Dryers
Workhorse Manual Printers
Tuf Automatic Printers
Exposure Units
Newman Roller Frames
Hix Heat Transfer Machines
Tekmar Bulk Adhesive Systems
Screen Racks
Raytek Temeprature Guns
Odyssey Screen Print Equipment
Washout Sinks
Pressure Washers
Livingston Systems Hold Downs
Xante Laser Printerss
Tekmar Spot Cleaning Guns
Workhorse Products Equipment
Dryer Belts & IR Heat Panels
Exposure Blankets & Bulbs
...And Much More!
NEW SHOP SETUPS
PERFORMANCE
Screen Supply
TM
800-659-8337
Fax 800-808-8337
E-Mail: [email protected]
TEAM PERFORMANCE
NEW
"DELIVERING IN 48 HOURS OR LESS TO MOST OF AMERICA!"
Working to earn
your business &
save you money!
Proud to serve you
from New Jersey
since 1992:
*SALT LAKE
CITY
Same Day Shipping
Until 4:30 PM MST
Wes & Lanette Hanson
NEW JERSEY
HEAT TRANSFER
MACHINES
*
Same Day Shipping
Until 4:30 PM EST
DIP
TANK
BUY INK
TECHNICAL
M ONTHLY
SUPPORT
B UYER
We provide free technical support of all screen printing
(no matter where you got them). Since we use
P ROGRAM products
our products every day in our working shop, we tend to
give "real world" help to get you up and running fast.
Help (732)866-6081
BEST PRICES
OUR POLICY:
We will beat your best price on any piece
of equipment we sell. Simply show us
a written quote, current advertisement or
catalog from another supplier and we'll
make you a better deal!
We have a 100% money back
guarantee on every supply we
sell*. Every piece of equipment is
backed by a comprehensive
manufacturers warranty. You can
pay us by MasterCard, Visa,
American Express, Discover or
COD company check. We keep
our overhead really low, so our
prices stay low too!
S AV E M O N E Y W I T H U S !
Are you looking for something that is not in
our catalog? Let us know and we'll gladly
track it down for you. We are here to help.
MATERIAL SAFETY
DATA SHEETS (MSDS)
Material Safety Data Sheets are available on all products. It is our policy
to attach the MSDS to your invoice the first time you purchase a product. If
you need a copy of an MSDS for any reason please visit our website at
www.performancescreen.com or call us at (800)659-8337.
*Returns must be made within 30 days of purchase.
*Returns must be in new “ready-to-sell” condition.
*Does not include special orders or equipment.
All prices and specifications are subject to change without notice.
A $4.25 handling charge is applied to all orders.
All NSF checks will be charged a $35 processing fee.
Refused UPS shipments subject to restocking fee..
Disclaimer:All recommendations and statements made are based upon our research and experience. However, since we have no control
over the conditions of use and storage of the products sold, we cannot guarantee the results obtained through the use of our products. All
products are sold and samples given without any representation or warranty expressed or implied, of fitness for any particular purpose or
otherwise, and upon condition that the buyer shall determine the suitability of the product for its own purpose. This applies also where
protective rights of third parties are involved. It does not release the user from the obligation to test the suitability of the product for the
intended purpose and application.
37
49
Bob & Kathy Drake
Bob and Kathy Drake started Performance Screen Supply in 1992 to provide quality
screen printing supplies and equipment at reasonable prices. We personally test every
product and back them up with "real world" technical support and our famous money
back guarantee. Our commitment is to work hard every day to be your favorite supplier.
When you purchase any 3 products on a regular
basis we'll automatically give you our very best
"MBP" pricing on any and all items you purchase
from us. We want to be your favorite supplier.
STUFF!
MESH PANELS FOR NEWMAN ROLLER FRAMES
#TGAIR
TEKMAR
EXHAUSTEX
1500
47
25
19
46
40
TUF
$21,800 53
DIRECTORY
ADHESIVE (SCREEN MESH)-4
ADHESIVE (SPRAY TACK)-6,7,33
AUTOMATIC PRINTERS-52,53
BLOCKOUT LIQUID-8
BLOCKOUT PEN-9
BOOKS AND VIDEOS-44,45
CAP PRINTERS-56,57
CAPILLARY FILM-14
DEGREASER-11,47
DRYERS-50,55,58,59
EMBROIDERY BACKINGS-34
EMBROIDERY NEEDLES-35
EMBROIDERY THREAD-32,33
EMPTY BUCKETS-22
EMULSION-14,15
EMULSION RECLAIMER-10,11,47
EXPOSURE CALCULATOR-60
EXPOSURE UNITS-60,61
FLASH CURE UNITS-50,52,55,59
GLASS CLEANER-7
GOOP SCOOPS-22
HAND CLEANER-8
HAZE REDUCER-11, 47
HEAT TAPES-21
HEAT TRANSFER MACHINES-36,37
HEAT TRANSFER SUPPLIES-38,39
INKS(PLASTISOL)-2,3
INKJET FILM POSITIVE-40,42
INK MIXER-2
INK KNIVES-22
JACKET HOLD DOWNS-50,65
LASER FILM POSITIVE-42
LASER PRINTER (XANTE)-43
LASER TARGETING SYSTEMS-49
MESH ABRADER-11
MESH DETERMINER-4
NUMBER PRINTING-29
PACKING TAPE-31
PALLET PROTEK-23
PIN REGISTER SYSTEM-Call For Info
PMS BOOKS-31
POCKET MASTER-28
PRINTERS -51,52,53,54,56
PRESSURE WASHER-63
REPLACEMENT PARTS-48
RUBBER GLOVES-12,13
SAFETY EQUIPMENT-12,13
SAFE LIGHT SHIELDS-14
SCOOP COATERS-15
SCORCH REMOVER-20
SCREENS PRESTRETCHED-5
SCREENS (RETENSIONABLE)-24
SCREEN BRUSHES-10
SCREEN CHEMICALS-10,11
SCREEN MESH-4,24,25
SCREEN OPENER-7
SCREEN RACK-64
SCREEN STRETCHER-4,24,25
SCREEN WASH-11
SILICONE SPRAY-7
SINKS-62
SPOT CLEAN EXHAUSTER-19,20
SPOT CLEANING FLUID-19
SPOT CLEANING GUNS-18
SQUEEGEE BLADE-16
SQUEEGEE HANDLE-17
STAPLE TAPE-4
TAPE (BLOCKOUT)-8,9
TEMPERATURE GUN (IR)-21
TENSION METER-25
TEST PRINT MATERIALS-27
TRAINING MATERIALS-44,45
VACUUM PLATEN-28
VELLUM PAPER-41
WASHOUT HOSE-15
WATER FILTRATION-62,63
WIPING CLOTHS-26
WOOD BOARDS-28
Phone to order (800)659-8337
RACEWAY EQUIPMENT
Tabletop Printers
$175
Adult
16”x16”
$795
Adult
16”x16”
#P1X1
4 Color/2 Station
1 Color/1 Station
#P4X2
$450
$1,045
Adult
16”x16”
4 Color/1 Station
6 Color/2 Station
Adult
16”x16”
#P4X1
#P6X2
Free Crating, Ships UPS
Exposure Units
U.V. Tuned Black Lights
and Compression Top
120 Volts, 5 Amps
#EXP-2024-6B
$430
$85
20”x24” max screen size
500 Watts
120 Volts
5 Amps
#EXP-PIN Optional Pin Registration System
Allows you to pre-register your artwork
for a faster setup. Includes registration
pins and 10 carrier sheets. Only $50
#EXP-500W
Dryers
$425
1575 Watts
120 Volts,13.3 Amps
#LC1600
For $100 extra-Upgrade
to 18”x18”, 2223 Watt,
120 Volt, 18.5 Amp Flash
#LC2200
16”x16” Flash Dryer
#CD5-6020
#CD6-7220
$2,095
$2,495
20”Wide Belt
Legs Included
Free Crating
5 Foot Conveyor Dryer
Accessories
Youth
14”x14”
Youth, Infant and
Leg/Sleeve Boards
Neck
16”x18”
Infant
10”x10”
#PCP1
New Jersey
Salt Lake City
DISC VER
Hat
Platen
$25
Neck, Youth, Infant and
Leg/Sleeve Boards + Hat
L O C A T I O N S
$80
Platen Dimensions:
4 ½”wide x 3 1/8” tall
Hat
Serving All 50 States and the World!
#PH
Sleeve 5 1/4”x22”
2
PERFORMANCE
Screen Supply
For more information contact:
6 Foot Conveyor Dryer
Youth
14”x14”
Infant
10”x10”
Sleeve
5 1/4”x22”
240 Volts
15 Amps
$175 for all 5
$125 for all 3
#PCP2
20”Wide Belt
Legs Included
Free Crating
120 Volts
17 Amps
Extra
Pallet
Bracket
#PB1X3
(800)659-8337
Fax (800)808-8337
HI TEST INK
2
TM
HIGH OPACITY - LOW BLEED INKS
They're smooth and creamy so you can print faster
and get better coverage with less effort! Our special
formula won't fatigue the manual printer and allows
the automatic screen printer to crank up the speed
This ink is a screen printers dream come true!
LIME GREEN SCARLET RED
LEMON YELLOW
NATURAL
WHITE ORANGE
GOLDEN YELLOW
SUPER HI TEST INK
TM
Even more bleed resistant and opaque than our original HI TEST ink.
SUPER HI TEST inks are slightly thicker but still easy to print by hand.
WHITE and GOLDEN YELLOW
AVALANCHE
WHITE
Incredible new technology allows our thinnest formula ever! Superior
TM
bleed resistance and more optical whiteners than our HI TEST white.
OUR #1
WHITE
AVALANCHE
WHITETM HEAVY DUTY
Same as our original Avalanche White except a heavier body to
provide even better coverage and opacity on automatic printers.
POLY KILLER WHITE
TM
Bleed resistant to the MAX. Poly Killer White has the maximum killing
peroxide & special expensive bleed resistant plasticizers . Only use on
100% polyester fabrics. Slip sheet all printed shirts to prevent ghosting & no
overprinting with other colors without testing first. This ink is sick stuff - Use care!!
NEW
Jiffy INK MIXER BLADE
Attaches To Your Power Drill!
14" Long For 1 Gallon Buckets
Stainless Steel Construction
About 450 rpms Works Best
HINT:
Use the lowest mesh count that will hold the details of
your design. On dark shirts, most printers use the
"PRINT-FLASH-PRINT" technique. Maximizing ink film
thickness is an essential part of bleed resistant prints.
Since high opacity inks lay down thicker, they need
more time in the dryer to cure.
Item# Description
Quart Price Gallon Price
HI TEST Colors
HI TEST White
SUPER HI TEST Gold
SUPER HI TEST White
AW AVALANCHE WHITE
AWH AVALANCHE WHITE-HEAVY DUTY
PKW POLY KILLER WHITE
HS2 JIFFY MIXER-1 gallon
Discounts: $1.00/gal buy 4 gallons
$31.45
$32.60
$32.99
$39.83
$33.03
$33.03
$48.46
$77.79
$81.62
$86.95
$113.75
$83.70
$83.70
$121.32
$15.50 each
$2.00/gal buy 8 gallons
Prices subject to change without notice.
Premium Soft Hand Plastisols
EASY PRINTING BY HAND OR AUTOMATIC
SMOOTH AND CREAMY CONSISTENCY
PREMIUM QUALITY
REASONABLE PRICES
NEW VEGAS GOLD
AWARENESS PINK
FLAG RED
ROYAL BLUE
NAVY BLUE
FLAG BLUE
ORANGE
GREY
BLACK
PURPLE
LEMON YELLOW
SCARLET RED
TURQUOISE
MAROON
BRITE BLUE
KHAKI
MED. BROWN
BRITE GREEN
VERMILLION RED
ULTRA BLUE
FOREST GREEN PRIMROSE YELLOW
MAGENTA
GOLDEN YELLOW
GLOW-IN-THE-DARK
HOT PINK
BRITE RED
SHIMMER
SHIMMER
METALLIC SILVER METALLIC GOLD
COLUMBIA BLUE
NEW
Plastisol Ink
Plastisol Ink
You don't need big arms to print these inks!
DAMN GOOD 3
PLASTISOL INK
TM
HanesTMT-Shirt Colors Match These Inks!
Hanes WATERMELON
Hanes LT. BLUE
Hanes TEAL
Hanes JADE
Hanes CARDINAL
Hanes FUSCHIA
Disclaimer: Our products are not endorsed or manufactured by Hanes.
TM
TM
TM
TM
TM
TM
Hints: All inks heat cure at 320 degrees. Dark colored substrates, heavier ink
deposits and heavier substrates (ie. sweatshirts) require much longer cure
times/temps. Heat tapes are a good way to check your dryer. Do a "Stretch
Test" by pulling the ink between your thumbs (properly cured plastisol will
usually stretch at least 1/8" without cracking). A "Wash Test" is the only fool proof
way to test ink cure. Stir all inks before using to get the ink flowing properly. Metallic
inks require more time and heat to cure because they reflect IR energy. Metallic
inks also are likely to dull and oxidize when washed. To thin inks add curable
reducer (up to 25% by volume). You can add curable reducer to HI TEST inks but
adding more than 2-4% can reduce opacity and bleed resistance. To increase ink
volume (i.e.. when you don't have enough of an ink color to finish a job) add
extender base which is ink without any color pigment.
ITEM
Quart Price Gallon Price
BLACK
COLORS-Damn Good
Damn Good-Awareness Pink
SHIMMER METALLICS
GLOW-IN-THE-DARK
EXTENDER BASE
Curable REDUCER
PUFF ADDITIVE
$16.33
$24.02
$33.28
$42.14
$53.17
$23.55
$23.81
$48.00
INK COLOR CARD
Stretch Additive Clear
$30.75
NYLON BONDING CATALYST
$10.82/ 4oz
$44.51
$58.41
$90.24
$99.04
$197.37
$56.57
$57.81
$142.20
$2.50
Discounts: 5% buy 4 gallons 10% buy 8 gallons
15% buy 12 gallons
4
WOOD SCREENS 5
SCREEN MESH
MONO-FILAMENT MESH
30
60
86
110
125
160
200
230
255
275
305
330
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
GOLD
GOLD
GOLD
GOLD
GOLD
51 INCH
THE BEST FRAME IN THE WORLD!
*Finger Mortise & Tenon Construction out of
#1 Grade Kiln Dried Poplar Hardwood
*Higher Mesh Tension- 20 to 25 Newtons on 110 Mesh
*Polyurethane Coated Frame- Easy Cleaning
61 INCH
$13.85/yd 40' WIDE ONLY
---------$14.65/yd
$11.25/yd $13.55/yd
$10.65/yd $13.97/yd
$12.52/yd $14.29/yd
$14.62/yd $16.76/yd
$18.00/yd $20.65/yd
$23.79/yd $26.49/yd
$25.04/yd $28.62/yd
$25.20/yd $29.58/yd
$28.64/yd $32.71/yd
---------$47.74/yd
5% buy Half Bolt 10% buy Full Bolt
60-160 mesh bolt is approx. 55 yards, 200-330 mesh bolt is approx. 33 yards
SPECIAL ORDER MESH AVAILABLE
22X25
23X27
MULTI-FILAMENT MESH MESH DETERMINER
MESH # COLOR 52 INCH
$7.90/yd
$8.64/yd
$9.64/yd
$11.81/yd
$13.63/yd
DESCRIPTION
60
83
110 123 156 195 230 280 305 355
17.09 14.97 14.97 15.54 16.24 17.02 17.77 19.06
18.09
18.47
18.85
18.87
15.87
16.18
16.56
16.58
15.87
16.18
16.56
16.58
16.47
16.80
17.16
17.18
17.18
17.51
17.87
17.91
24X24
25X36
MBP Price
MHD 3 in 1 MESH COUNT DETERMINER $22.95
Discounts: 5% buy Half Bolt 10% buy Full Bolt
Bolt length is approx. 60 yards
MESH ADHESIVE
21.09
24.91
20.73
30.42
18.44
22.98
18.44
22.98
19.04
23.85
19.75
24.89
22.16
40.29
21.80
38.96
19.51
38.96
19.51
39.09
20.11
41.20
20.84
42.93
Based on a 20"x24" Frame and 110 mesh
with optimal gluing technique you can get:
16 oz Adhesive- 80 Frames
15 fl oz Activator- 40 Frames
TGFA16 16 oz Trade Adhesive
SFA13 15 fl oz Spray Activator
DS8
8 oz Debonder Solvent
Our Price MBP Price
$60.25
$21.00
$24.95
$58.95
$17.95
$19.95
ACCU-STRETCH
World's Fastest Pneumatic Screen Stretcher
Fabric is stretched directly from the bolt 24" x 36" $1,600
to minimize waste. Stretches all wood, 24” x 60”
$1,800
aluminum and steel frames.
36"
x
48"
$1,800
Totally automatic, complete
$2,100
tension control and super fast. 60” x 60”
Other sizes available, call for pricing.
19.49
20.78
21.09
21.60
21.49
19.29
31.00
20.84
27.16
22.84
29.05
23.49
30.00
21.69
46.36
22.42
49.38
23.75
56.02
24.42
53.60
O.D. Size
40
18x20
21.91
23.51
24.04
24.49
24.55
18x22
19x22
20x20
20X22
60
83
110 123 156 195 230 280 305 355
21.14 19.11 19.11 19.64 20.32 21.09 21.80 23.05
23.27
23.67
24.13
24.18
20.93
21.38
21.84
21.89
20.93
21.38
21.84
21.89
21.55
21.98
22.45
22.49
22.25
22.69
23.15
23.20
23.11
23.56
24.05
24.05
23.84
24.27
24.78
24.27
25.18
25.62
26.13
26.13
24.18
25.84
26.29
26.78
26.78
20x24 23.15 22.82 20.74 20.74 21.29 21.92 22.62 23.37 24.59 25.19
26.87
29.02
26.96
34.55
23.62
27.25
23.62
27.11
24.15
27.96
26.07
29.00
26.25
35.11
26.44
31.27
28.76
33.16
29.53
34.11
23x31 27.11 26.98 26.13 26.13 26.79 27.74 29.15 29.45 30.64 31.51
24X24
25X36
28.24
50.15
27.87
48.82
25.58
48.82
25.58
48.96
26.18
51.07
NEED A SPECIAL SIZE?
CALL FOR PRICE QUOTE
Air Compressor
Not Included
STRONG POLYESTER TAPE
PREVENTS MESH DAMAGE FROM STAPLES
MAKES STAPLE REMOVAL EASIER
9/16" X 72 Yard ROLL
MBP Price
DESCRIPTION
STAPLE TAPE $12.95
24.36
24.95
25.25
25.76
25.65
26.93
27.65
35.93
38.36
28.58
74.93
*Hand Constructed 6063T5 Aluminum Alloy
*Each Piece is Hand Cut & Welded to
Insure Water Tight Seal
*Corners Ground Smooth for Flatness
22X25
23X27
STAPLE TAPE
ITEM #
ST
20.11
20.44
20.93
20.84
MADE IN USA
How many Screens Can I Get From:
Description
18.76
19.09
19.58
18.98
ALUMINUM SCREENS
DRIES INSTANTLY WITH ACTIVATOR
WORKS WITH ALL MESH COUNTS
NO PRE-MIXING REQUIRED
EASY TO REMOVE FROM FRAME
THE BEST ADHESIVE AVAILABLE
Item #
18.05
18.36
18.87
18.76
23x31 24.22 24.13 23.39 23.24 24.07 25.03 27.05 27.18 28.97 29.78
WHAT MESH COUNT IS THIS???
Put this MESH DETERMINER on your mesh
and it will tell you what the mesh count is.
ITEM #
17.25
18.45
18.85
19.22
19.25
20x24 18.84 18.49 16.34 16.34 16.91 17.57 18.31 19.06 20.33 20.96
with $150 minimum purchase, allow 3-5 days
WHITE
WHITE
WHITE
WHITE
WHITE
40
18x20
18x22
19x22
20x20
20X22
Discounts:
6XX
8XX
10XX
12XX
14XX
O.D. Size
Screens
Screen Making Stuff
MESH # COLOR
Max. Size is 14 Square Feet
Allow 5 Days Lead Time
26.89
52.78
Outside Dimension 7 7/8"x 4 1/4"
Inside Dimension 6" x 3 5/8"
For CAPMAX style printers
29.82
65.89
30.47
63.45
IN STOCK SCREENS SHIP SAME DAY FROM NJ OR UTAH
Other sizes allow approx 4 days to mfg- FOB Lead Hill, AR.
All mesh counts over 200 are Yellow.
Discount: 5% for 25 screens. OK to mix & match.
Mesh Counts in Stock:
$16.00
$16.00
$16.50
$16.50
$17.00
$17.50
28.47
59.24
NO MINIMUM ORDER.
Curved Metal Cap Screens
80
110
124
155
200
300
27.75
56.22
29.18
30.00
30.45
30.95
30.95
30.80
33.27
40.05
39.45
34.64
84.78
Wood
Cap Screens
O.D. Size
83 110 156 195
8.5" x 12" $13.95 $13.95 $13.95 $13.95
6
BULK ADHESIVE APPLICATOR
No VOC
Simply The Best Adhesives For Printers!
Water Based
Economical
Multi Station
Kit Available
Made in USA
Quiet
Limited Lifetime
Warranty
H igh
V olume
L ow
P ressure
Technology
TB10
TB10 Water Based
Adhesive dries quickly,
contains no solvents,
propellants or aerosols.
One gallon of TB10 is
equal to 6 cases (about
70 cans) of aerosol
spray ahesive. This is
a savings of about 75%
333N
Discontinued
OUR MOST POPULAR ITEMS:
#1 380 Mist Adhesive
#2 375 Flash Cure Mist Adhesive
#3 480 Screen Opener
Operates on compressed air. No electric required!
BEAUTY TIP:
The TARGET SYSTEM TB1000 is the affordable
answer to aerosol can replacement. Designed
to be used with TEKBOND TB10 water based
adhesive, this revolutionary system will quickly
provide savings of up to 500% over aerosols alone.
Utilizing HVLP technology, the system provides an on
demand supply of adhesive with virtually no over spray.
No clog nozzle
Item #
TB1000
TB1000-2
TGOHG
TB500
TB10
TB10-5G
TB15-1G
Description
Item #
SYSTEM TB 500
Size
if you have
Target Automatic Bulk Adhesive System w/ 1 Pistol Gun 1 Buy
Automaticl Press
Buy if you have
Target Automatic Bulk Adhesive System w/ 2 Pistol Guns 1 Auto/1 Manual
for options
Optional Overhead Gun to Hang From Ceiling.(No fumbling!) Callavailable
Buy if you have
Target Manual Adhesive System w/ 1 Pistol Gun
1 Manual Press
TEKBOND Water Based Bulk Screen Printing Adhesive 1 Gallon
TEKBOND Water Based Bulk Screen Printing Adhesive 5 Gallon
1 Gallon
TEKBOND Water Based Bulk Embroidery Adhesive
MBP Price
$895.00
$1,175.00
$1,085.00
$495.00
$39.00/gal
$35.50/gal
$46.00/gal
Discounts: 15 gallon and 55 gallon drums are available.
Add Manufacturers $10 packaging charge to TB500 and TB1000.
Adhesives
Adhesives
SYSTEM TB 1000
SPRAY ADHESIVES 7
380
385
375
373
480
999
20/20
22/80
22/60
Use BABY OIL to easily remove
spray adhesive from your skin.
This is much less painful than
pulling the adhesive off hairy legs.
Apply oil with a rag, or use a
Q-Tip for nostrils and the sort.
This also works well on eyeglasses
(just be careful not to scratch them.)
Description
When To Use
Mist Adhesive
General T-Shirt printing.
Web Adhesive
Fleece printing.
Flash Cure Mist Adhesive Multi-color flash cured prints.
High Perf. Adhesive For maximum holding power.
Cleans ink plugged screens.
Screen Opener
Spray underside of screens to reduce
Dry Silicone Spray ink buildup on multi-color jobs.
Clean exposure unit glass.
Glass Cleaner
Ink and adhesive cleanup.
Citrus Cleaner
Removes oils, pen & stains.
Spot Remover
Can Price Case Price
$5.72 can
$5.88 can
$6.27 can
$8.86 can
$5.85 can
$6.34 can
$4.17 can
$12.16 can
$7.75 can
$56.68 dz
$58.54 dz
$63.22 dz
$94.44 dz
$58.17 dz
$64.11 dz
$37.98 dz
$133.97 dz
$81.06 dz
Discounts: 5% buy 10 Cases, 10% buy 20 Cases (OK to mix solid Camie cases for discounts)
All our Camie products manufactured after 1/1/2005 are California VOC compliant.
H
I
N
T
S
Get the best performance out of all spray cans by shaking before using.
At the end of the day turn adhesive cans upside down and spray for a few
seconds to clear adhesive from the nozzle tip. Spray in a quick, even pattern
and allow a few seconds for the adhesive to "tack up" or dry before putting
on your first shirt. Several thin layers of adhesive applied in the morning will
give you a good adhesive base. Adhesives will not transfer to the inside of
your shirts unless you spray too much adhesive (making puddles of adhesive
on your pallets never helps either). To remove adhesive transfer from shirts,
turn the shirt inside out, run back through dryer and immediately use a piece
of sticky packing tape to rip the excess adhesive from the shirt.
Simulated piece of tape
No adhesive here
Adhesive on this
half of tape goes
on the screen mesh
DON'S FAVORITE
The best tape for roller frames. Doesn't
leave a mess when removed. Costs less
than split liner tape. The purple tape is
perfect for textile printing.
LIQUID
BLOCKOUT
"DAMN GOOD BLOCK OUT"
Fast Drying
Water Soluble
Easy Spreading Great on Coarse Mesh
Packaged in Gallon or Quart Buckets
SOLVENT PROOF TAPE
Description
Size
ATP3 Newman Roller Tape-Purple
SRBOT Solvent Proof White Cloth Tape
SRBOT360 Solvent Proof White Cloth Tape
DGBO Liquid Blockout-Red
Rolls/Case MBP Price
3"x55yard
2"x60yard
3”x60yard
24
24
16
$10.65/roll
$14.60
$21.90
Quart- $12.95 Gallon- $29.95
Discounts: 5% buy 1 Case, 10% buy 6 cases. No mix and match allowed. Liquid Blockout buy 4 gallons less $1.00/gal. Buy 55 gal drum less $4/gal
HAND CLEANER
Gentle scrubbers made of recycled plastic are
soft on your skin and remove plastisol ink fast.
Bob says this stuff is the best. Guaranteed!
REMOVES Item #
PLASTISOL
INK FAST
PHCKIT
PHC3
PNB
PHCD
STOP STRUGGLING WITH MASKING TAPE!
Stop waiting for liquid blockout to dry! Stop
picking those little pieces of masking tape off
your screens! Stop ruining shirts because
the ink oozed where it wasn't supposed to go.
Our BLOCKOUT TAPE is easy to apply and
can be left on the screen permanently or
easily removed before reclaiming. Solvent
resistance is very good and it leaves no
adhesive residue or mess on your screen.
The time you save using BLUE BLOCKOUT
TAPE is incredible!
Applied
To Back
of Screen
Applied
To Front
FREE SAMPLE AVAILABLE-TRY SOME TODAY!
This white cloth backed tape is the most
solvent resistant, permanent tape we could
find. It ain't never coming off! Also use on
square bar of roller frames to protect mesh
from screen clamp damage on press.
Item #
BLUE BLOCKOUT TAPE 9
Screen Tapes
Screen Tapes
Thin strip of adhesive goes on frame roller
Simulated piece of tape
NEWMAN ROLLER TAPE
8
Description
MBP Price
3x3 LB. TUB HAND CLEANER,
DISPENSER, NAIL BRUSH
$59.95
1x3 lb. TUB HAND CLEANER
NAIL BRUSH
DISPENSER
$13.95
$.95
$24.95
Discount: 5% buy 8x3 lb. Tubs
10% buy 16x3 lb. Tubs
ITEM #
ROLL SIZE
BOT236
2"x36 yards
3"x36 yards
4"x36 yards
BOT336
BOT436
Rolls/Case Our Price
36
$4.85
24
$7.28
18
$9.71
Discounts- 5% buy 1 case 10% buy 6 cases. (OK to mix and match sizes)
BLOCKOUT
PEN
by FIRST PRINT
Pressurized- Works Upside Down
Touch-Up Pinholes Easily
Pen Fills Up to 2000 Pinholes
For Use with Plastisol Inks
Water Soluble/Reclaimable
Dries in About a Minute
#BOPNEW
$8.25
Discounts: 5% buy 1 dozen
10% buy 6 dozen
10
EMULSION
RECLAIMER
SODIUM METAPERIODATE CRYSTALS
Reclaimer
SAVE BIG $$$
Mix Your Own Reclaimer
Reclaims All Direct Emulsions & Capillary Films
ENVIRONMENT CONCERNED PRODUCTS
BOB'S Haze Reducer & Degreaser
Our Most Popular Screen Product
USE ON WET SCREEN AFTER RECLAIMING.
EASY TO USE: Spray On, Give a Quick Scrub
and Pressure Wash Off.
ELIMINATES CORROSIVE HAZE REMOVERS.
DEGREASER IS BUILT IN TO SAVE STEPS.
BIODEGRADABLE and NON-CORROSIVE.
USE AFTER EVERY RECLAIMING- We
Guarantee You'll See The Difference!
BOB'S Screen Wash
STOP USING DANGEROUS MINERAL SPIRITS!!!
Save $$$ On Freight
It costs a lot less to ship powder than gallons
of water!
Costs Less Than $6.00/gal.
Other suppliers mix this powder with water from
their garden hose and charge up to $30.00/gallon.
32 Ounce Container
Makes 21 gallons of reclaimer. Just mix with
water.
ITEM #
DESCRIPTION
Mfg. List
MBP Price
SRC32 32 oz Reclaimer Crystals $149.95 $124.95
Ships from NJ warehouse only.
Discounts: 5% buy 2 containers
10% buy 4 containers
UPS charges a $25.00 hazardous surcharge when shipping via ground only (No air shipments permitted).
EMPTY SCREEN BRUSH
SPRAY
BOTTLE
& Chemical Resistant Sprayer
THE PERFECT BRUSH FOR DEGREASING
OR RECLAIMING SCREENS
Save money by using less
chemicals when you spray
them on your screens.
These trigger sprayers have
been tested to be compatible
with all our chemicals.
ITEM # Description MBP Price
SBQ Empty Bottle-Quart $1.15
SPRAYER Trigger Sprayer $1.45
Discounts: 10% buy 6 Bottles
Our Most Popular Biodegradable Screen Wash
Low in Odor, Won't Make You "High"
Works Quickly On Plastisol and Other Inks
BOB'S Soy Bean Wash
Description
BHR
SRL
PMA
PMD
SW
SS
BOB'S Haze Reducer & Degreaser
BOB'S Liquid Reclaimer
BOB'S Mesh Abrader
BOB'S Mesh Degreaser
BOB'S Screen Wash
BOB'S Soy Bean Screen Wash
BOB'S Mesh Degreaser
Degreasing and Wetting Agents
Biodegradable Like All BOB'S Chemicals
Will Not Harm Mesh
HINT Use MESH DEGREASER every time you reclaim
This product helps eliminate all those pinholes!
BOB'S Liquid Reclaimer
Removes All Emulsions & Capillary Films
Biodegradable Like All BOB'S Chemicals
No UPS Hazardous Fee When Shipping
HINT Spray on both sides of screen, work in with a
screen brush, let sit 2 minutes and pressure wash off.
Soy Bean Solvent is Low Evaporation
Non-Toxic and Biodegradable
Rinses With Water
Item #
BOB'S Mesh Abrader
Roughens Mesh For Better Screen Making
Increases Surface Area Of Mesh
Improves Stencil Adhesion To The Mesh
HINT Use MESH ABRADER on new mesh and after
every 10 reclaimings for better stencils
Quart Gallon
$14.95 qt
$7.75 qt
$17.95 qt
$10.45 qt
$13.75 qt
$14.95 qt
$42.95 gal
$18.95 gal
$44.75 gal
$23.95 gal
$31.95 gal
$39.50 gal
Discounts: 5% buy 4 gallons 10% buy 12 gallons (OK to mix and match)
NEW USER
SPECIAL
Try any 4 quarts of BOB'S
Screen Chemicals for only
$45
55 gallon drums available on all products. Please inquire for pricing. Lifetime limit is one per customer
Trigger Sprayers Not Included
SALE!
BUY 3 Gallons
of Reclaimer
GET 1 Gallon
FREE!!!
No other discounts
apply.
Special Chemical Resistant Scrub Brush. Handle
is Designed to Protect Your Hands. Bristles Are
"Mesh Safe". Buy Several and Use Different
Brushes For Reclaiming,Degreasing and Dehazing.
ITEM # DESCRIPTION
MBP Price
SB Screen Brush $4.95
Discounts:
10% Buy 4 Brushes
15% Buy 12 Brushes
Screen Prep
NOW INCLUDES
FREE SCOOPER
BOBS SCREEN CHEMICALS 11
TM
12
SAFETY GEAR
HEADGEAR w/VISOR
RUBBER GLOVES 13
CLEAN HANDS = CLEAN SHIRTS
Safety Gear
SAFETY
GOGGLES
A: It costs you $.40 for an $8/hr employee to wash his hands
if it takes him 3 minutes. (+ soap and paper towels!)
B: One pair of gloves costs: $.10
C: You save $.30 each time an employee uses gloves!
FITS OVER EYEGLASSES VENTED - NO FOGGING
REQUIRED BY OSHA IN EVERY SHOP
COMFORTABLE DESIGN SHATTER RESISTANT LENS
$AVE $775/EMPLOYEE/YEAR!!!
EYE WASH
STATION
PORTABLE- PLACE ONE NEAR SPOT CLEANING
GUNS, PRESSURE WASHERS, WASHOUT SINKS, ETC.
BUFFERED SOLUTION- NEUTRALIZES ACIDS AND
CORROSIVES.
PROVIDES IMMEDIATE FLUSHING FOR THE CRUCIAL FIRST
SECONDS OF AN EYE INJURY.
REQUIRED BY OSHA IN EVERY SHOP
REPLACEMENT BOTTLES ARE ALSO AVAILABLE
Item #
HV
GOG
EW
EWRB
Description
Mfg. List
$39.95
$4.50
$43.95
EYEWASH STATION w/Bottle
EYEWASH 16oz Replacement Bottle
$16.95
Headgear w/ Visor
VENTED GOGGLES
MBP Price
$29.95
$2.35
$37.95
$13.80
REUSABLE NITRILE GLOVES
SOLVENT RESISTANT 13 Mil FLOCK LINED
GLOVE IS PERFECT FOR ALL DAY USE IN
YOUR SCREEN CLEANING AREA!
ITEM #
Size
NG8
NG9
NG10
SMALL
MEDIUM
LARGE
Mfg. List
$8.50
$8.50
$8.50
MBP Price
$4.25/pair
$4.25/pair
$4.25/pair
Discounts- 10% buy 1 Dozen/Size
Gloves
If your employees are like most, they wash their hands
at least 10 times a day. It is hard to avoid getting your
hands dirty working with inks, emulsions, and screen
making chemicals. Our inexpensive disposable gloves
can reduce the time wasted washing hands and offer
protection from solvents and chemicals. Keep your
hands from getting rough and red by using our gloves.
Consider this:
PROVIDES BEST COMFORT
PROTECTS FACE FROM SPLASHES
ADJUSTABLE TO EXACT HEAD SIZE
BEST PROTECTION/VISIBILITY
REDUCE LABOR COSTS
PROTECT HANDS FROM
CHEMICALS
100 GLOVES PER BOX
BOX ARTWORK MAY VARY
Item#
Size
Description
OUR PRICE MBP PRICE
RBG LARGE LATEX RUBBER GLOVES $7.98/box $7.69/box
RBGPF LARGE
POWDER-FREE
LATEX RUBBER GLOVES $7.98/box
Discounts: 5% buy 20 boxes 8% buy 50 boxes
$7.69/box
DISPOSABLE NITRILE GLOVES
These are the toughest disposable rubber gloves we
have ever used! They are packaged similar to our
latex gloves (sold above), but are made of incredible
"BLUE" Nitrile Rubber. No more fingers falling off
when cleaning ink from screens. These gloves cost
a few cents more, but their durability will save you
money in the long run. Packaged 100 gloves/box.
Size XL only (because they are sized a little tight)
Item#
Size
Description
MBP PRICE
POWDER-FREE DISPOSABLE
$9.95/box
NITRILE RUBBER GLOVES
Discounts: 5% buy 10 boxes 8% buy 25 boxes
NGDXL X-LARGE
EMULSIONS
14
ALL CHROMALINE PRODUCTS AVAILABLE
#UDC-HV
A dual cure emulsion designed
for flourescent (and other weak)
light sources in the 420 spectral
VIOLET range. Plastisol, water-based, UV
and solvent inks. Sensitized life
is 4 weeks after you mix in diazo.
UDC-HV
Pure Photopolymer emulsion
designed for flourescent lights
in the 420 spectral range. High
RED solids for easier coating on low
meshes. Presensitized and has
a 1 year shelf life. Plastisol only.
$91.59/gal
#CP2-G
CP2
An economically priced, diazobased emulsion for textile and
graphics shops. An excellent
VIOLET choice for plastisol, solvent or
UV inks. Sensitized life is 4
FREEZE
STABLE
weeks after you mix in diazo.
CHROMA/TECH
A premium photopolymer emulsion
for shops using plastisol inks.
AQUA Very fast exposing, no mixing.
Excellent reclaimability.
Discounts: 5% buy 4 gallons, 10% buy 8 gallons, 13% buy 16 gallons NO MIX AND MATCH
$57.62/gal
#CTPL-G
PL
$106.96/gal
CAPILLARY
FILM
NEW
PRO/CAP SELECTION GUIDELINES
74-160 MESH
Pro/Cap 50
140-280 MESH
Capillex 38
160-400 MESH
Capillex 30
Pro/Cap 50 For Maximum Opacity
WHITE INK
38 with 280 mesh, 55 line
4-Color Process Pro/Cap
seps and triple duro squeegees.
ITEM #
DESCRIPTION
SIZE
MBP Price
Pro/Cap 30
26" X 15 Feet
$90.58
PC382615
Pro/Cap 38
26" X 15 Feet
$96.77
Pro/Cap 50
26" X 15 Feet
$104.98
Pro/Cap 50
SHEETS
15" X 15"
50 sheets
$189.95
CAP501515
Our pure photopolymer emulsion is expensive by the gallon, but cheaper by the
screen than diazo emulsions (it works better too!). We get 125 screens (20x24) from
just one gallon. Higher solids content means many more screens per gallon
Exposes 2x Faster
Go Home Early?
1 Year Shelf Life
No Waste!
Presensitized
No Mixing!
49% Solids
FREEZE
STABLE
No Pinholes!
Free Tech Sheets
Easy to Use
ITEM #
FREE HELP
SHEETS FOR
FIRST TIME
USERS. WE MAKE
CAPILLARY FILM EASY TO USE.
SAFELIGHT SHIELDS
MAKE FLOURESCENT BULBS SAFE!
Special- Buy 2
Yellow Shields
Get 2 Free
Yellow Screen Room Shield To Prevent
Exposure of Screens.
Shield Slips Over Flourescent Tube
Includes Safelight Filter and End Caps
4 Foot Length
MBP Price
Description
Item#
DRSY4 YELLOW SCREEN ROOM SHIELD $29.75
Quart Gallon
DESCRIPTION
SEX PURE PHOTOPOLYMER EMULSION $27.95 $74.95
Discounts: 5% buy 4 gallons 10% buy 8 gallons 13% buy 16 gallons
WASHOUT HOSE
What kind of hose are you using to
wash out your images after exposing?
Adjustable
Pin Point Spray
to Gentle
Mist Spray
BETTER DETAIL
QUICKER DRYING
Custom Cut Sheets Available
LESS MESS!
PC302615
PC502615
TRIAL OFFER: 50% OFF YOUR FIRST QUART
Emulsion
Screen Making
$68.96/gal
#CT420D-G
SEX EMULSION 15
The pinpoint spray blasts open
hard to wash out fine lines, while
the gentle mist spray is perfect for
capillary film. 30 inch hose attaches
to standard garden hose faucet.
Description
ITEM #
HOSE Washout Hose
EH8
8 Foot Extension Hose
Price
$32.95
$9.75
SCOOP
COATERS
Silver Aluminum Is Easy to Clean!
Perfect Coating Angle Is Guaranteed.
Uniform Coating of Emulsion.
Plastic Dust Cover is Included.
2" $16.76
3" $17.24
4" $17.80
5" $18.34
6" $18.62
10" $20.47
13" $22.40
14" $23.08
15" $23.84
16" $24.38
17" $25.42
18" $26.45
Note: The snap on plastic ends of the
scoop coater will completely seal with dried emulsion after first use.
19" $27.48 Exposure
20" $28.30 Calculators
24” $30.36 See Page 61
16 SERILOR
TM
SQUEEGEE
GUARANTEE:
Squeegees
STRAIGHT EDGE
TRIPLE DUROMETER
NEW
ALUMINUM
We recommend a 60/90/60 durometer squeegee
for general T-shirt printing. For Halftones and
Nylon Jacket printing a 70/90/70 durometer
squeegee offers better control of ink deposit.
17
SQUEEGEE HANDLE
STRAIGHT EDGE
SINGLE DUROMETER
INCREASED WEAR & TEAR RESISTANCE
EXCELLENT RESISTANCE TO PLASTISOL, UV INK and SOLVENTS
TRIPLE DUROMETER PREVENTS BLADE ROLLOVER
FINEST EUROPEAN QUALITY SQUEEGEE
SIZE 2” x 3/8” (Other sizes and profiles available by special order)
HINT:
GOLD
TM
LIFETIME WARRANTY
TM
The Serilor Gold aluminum handle is our favorite because it is rigid, easy to clean
and will last a lifetime. The special construction does not harm the blade and allows
it to be flipped over to use the other end (It doubles the life of your blades). You'll save
so much time and money with "one wipe and it's clean", that you'll wonder why you
ever used those dirty old wooden handles. Buy one and experience the BEST!
Squeegees
Try a piece of our triple
durometer squeegee
and if you do not agree
it is the best squeegee
you have ever used,
return it for a full refund.
SERILOR
Blades installed for FREE when purchased at same time as handles.
ITEM #
DESCRIPTION
MBP Price
SGS SERILOR GOLD ALUMINUM HANDLE $1.99/in
DUROMETER
Recommended For:
PRICE
60 or 70
Entry Level Printing
White Underlays-Heavy Ink Deposits
1st Choice for General T-Shirt Printing
Halftones, Fine Lines and Process Printing
$.94/inch
$2.05/inch
$1.87/inch
$1.87/inch
55/90/55
60/90/60
70/90/70
Add $.75 custom cut
No Minimum Order
Discounts: 5% buy a full 144 inch coil.
SQUEEGEE
SHARPENER
#DSC-020
The Diamond Short-Cut is the first
precision, manual squeegee sharpener for
manual and automatic squeegees 20" and
under. The tabletop sharpener includes one
indestructible diamond sharpening wheel
that will sharpen any durometer squeegee,
and optional wheels for rounded and
beveled squeegees are available. The unit
also features a dial indicator to gauge the
amount of squeegee material removed
during each sharpening pass. There is no
sharpener that offers such precision at
such an economical price.
$1,250
Add $1.25 cutting charge to the cost of each handle.
Specify sizes (up to 106") when ordering.
#SBOLT Replacement Bolt $.70 each
#SGSCAP Plastic End Caps $1.66/pair
Ergo grips
RUBBER GRIPS FOR WOOD OR METAL SQUEEGEE HANDLES
These wide rubber squeegee pads retrofit most squeegee handles.
Studies show that Squeegee Plus pads actually reduce the pressure
of your grip, increasing comfort, printing strength, and productivity.
Prevent carpal tunnel syndrome by protecting the delicate tendons,
nerves and blood vessels in your hands and wrists.
ITEM #
DESCRIPTION
Price
SPH Rubber Squeegee Pads- Pair of 5" $15.95
Discount: 5% buy 4 pair
WOOD SQUEEGEES
A classic wood handle with 70 durometer
blade installed. (6" total height)
16" $32.79
4" $8.19
18" $36.89
6" $12.30
20" $40.97
14" $28.69
F.O.B. Sarasota, FL
19
18
A I R D RY E R
ATTACHMENT
#TGDIF
#TGNOZ
#TGV125-02 Valve for TG125 $2.50
GUN STAND
Mounts weight balancer and
TG300
#TGS
Spot Cleaning Tips:
The high pressure of the
electric gun is the key to
the cleaning process. The
cleaning fluid should be used
sparingly like detergent in a
washing machine. A start/stop
approach to cleaning will allow
the fluid to evaporate, preventing
ringing. Use the pinpoint spray
first and then finish up with the
feathering spray for perfect results.
Be safe and never put your hand
behind the garment being cleaned
(You may shoot yourself, Ouch!).
Always wear eye protection and
use an exhauster to vent fumes.
Optional:
Weight Balancer
#TGWB
$75
FORMULA TS-3
FORMULA TS-1
Spot Cleaning Fluids
Fast Drying
New Detergent Additive
Non Flammable
EPA Ozone Compliant
$175
Quiet Adjustable Nozzle
Maintenance Free Light Weight
gun to table with "L" shaped arm
$75
WORKS
GREAT!
The TG125 is our most popular gun.
It's ergonomic handle makes for effortless
spot cleaning. The pressure has been
increased to make the TG125 an
incredible bargain. The adjustable
nozzle allows use on even the
most delicate fabrics with virtual
ring-proof cleaning.
REPLACEMENT
NOZZLES
$35
Professional Spot Cleaning Products
DIRECT FEED
ATTACHMENT
$35
$145
The TG300 is an high-powered
gun that blasts out even the
toughest screen print inks. The
design incorporates an exclusive
bronze alloy pump that ensures
long life and maximum efficiency.
It is available with optional air
Wide bottle prevents tipping! dryer and direct feed attachments.
ITEM #
NEW
TG200 SPOT
CLEANING GUN
$210
Often called "Old Faithful" the
TG200 is an updated version
of the all metal classic gun
design. As with the TG125
and the TG150, this gun comes
complete with the TARGET
adjustable nozzle. It is also
available with the air dryer and
direct feed attachments.
DESCRIPTION
TS3 TEKMAR TS3 Fluid For Plastisol $36.54/gal
TS1 TEKMAR TS1 For Stains & Oils $39.45/gal
Discounts- 5% buy 4 gallons 10% buy 12 gallons
55 gallon drum pricing available
EXHAUSTEX 1500
HELPS COMPLY WITH OSHA...YOU NEED THIS!
NEW
Rugged, all metal exhauster is the
affordable answer to exposure and
compliance problems. The powerful
motor quickly dries the heaviest of
fabrics while exhausting fumes away
from your workers. Reduce the risk
of workers shooting their fingers with
spotting guns. The stainless mesh
screen supports the garment and
keeps hands safely out of the way.
Item#
Prevents Gun From
Dropping & Breaking
MBP Price
Spot Cleaning Fluid
Spot Guns
$50
#TGAIR
TG125 SPOT
CLEANING GUN
Description
MBP
Price
Limited Lifetime EXT1500 TEKMAR Exhauster $575.00
Warranty
Add Manufacturers $10 packaging charge.
20
EXHAUSTEX 2000
The Ultimate Exhauster!
Gun and Weight
Balancer Optional
Monitoring your dryer temperature
is easier said than done.
The temperature inside any dryer varies
from day to day due to brownouts,
outside temperature changes
and type of garments being printed.
Heat tapes help you to ensure ink curing
and prevent shirt BURNING .
We recommend using a heat tape at the
beginning of each shift and whenever
you change the type of garment
being printed.
Activated Carbon Filter
Dual Speed Motor
The EXHAUSTEX 2000 is the latest in spot
cleaning technology. The powerful 2-speed
motor instantly removes airborne contaminants,
that are generated during the spot cleaning
process. The secondary Stainless Steel Chemical
Shield protects as it vacuums away over-spray.
The adjustable stainless steel arm rotates for
optimal cleaning efficiency and safety. An internal
Activated Carbon (Charcoal) Filtration Unit is easy
to recharge and allows spot cleaning to be done
safely inside the production facility. The Exhaustex
can also be conventionally vented to the outside.
Other advanced features include a built in Gun
Stand that is plumbed for an air dryer (optional) and
has an integrated inspection light. A convenience
outlet is provided for a cleaning gun and the
unit includes standard safety fused protection.
Operates on 110V electric.
Convenience Outlet Included.
MBP
Item# Description
Price
EXT2000 TEKMAR Ultimate Exhauster $1,195.00
290 FF
290
Before
REMOVES GARMENT SCORCHING
Just Spray On Scorched Area and
Run Through Dryer Again
Use on 50/50 and 100% Cotton Garments
Removes Some Pretty Good Scorches,
But Not Effective On Burns
Available in 16 oz Pump Spray Bottle
IT REALLY WORKS!
DESCRIPTION
SCOF TEXSTYLE SCORCH REMOVER
MBP Price
$11.50
Discounts- 5% buy 4 Bottles
HINT: SAVE SOME MONEY BY CUTTING
EACH HEAT TAPE IN HALF BEFORE USING
290 FF
290
After
300 F
300 F
310 F
310 F
320 F
HEAT
320 F
320 F
330 F
DESCRIPTION
RANGE
PRICE
PRINT TRANSFERS
190-230 F
240-280 F
290-330 F
340-380 F
$17.25
$17.25
LOW FUSING INKS
NORMAL CURING INKS
Add Manufacturers $25 crating charge.
SCORCH REMOVER
ITEM #
5-TEMP
HEAT TAPES
Heat Tapes
Scorch Remover
NEW
21
HEAT
TAPES
MAKE SURE YOUR INK CURES!!!
330 F
TO TEST YOUR HEAT
TRANSFER MACHINE
16 Labels per package
R
LASE
#MT4
$17.25
$18.95
TEMPERATURE GUN
Point and Shoot Technology
LASER SIGHT
ACCURACY
Point this TEMPERATURE GUN at the ink as the shirt comes out of the dryer and the digital
readout instantly shows the temperature. No more waiting for the heat tape or donut probe
to travel through the dryer. Also use this gun to scan the surface of your heater panels for
cold spots. This TEMPERATURE GUN makes it easy for printers to verify that ink reaches
curing temperature. How much does one job returned with under cured ink cost you?
$99.99
SHOW SPECIAL
#MTPOUCH
Optional Belt Pouch
and Wrist Strap Kit $10
Eliminates Heat Tapes
Temp. Range is 0-500 F
Accurate to + or - 2%
Battery Operated (9V)
1 Year Mfg. Warranty
SALE $139
22
INK KNIVES
"GOOD CHEAP INK TOOLS"
Ink Tools
Actual size is 12 inches tall
HINT: We never bother to clean
these ink knives. Just push them to
the bottom of a gallon bucket and
the lid will fit on perfectly. When you
need ink next time, just put on a
rubber glove to retrieve the ink knife
and dispense ink. No hand washing
or knife cleaning is ever required.
Goop
Scoop
INK KNIVES sold by the Dozen
Item #
Description
IK15
IK20
IK30
GS
1.5" Wide Ink Knife
2" Wide Ink Knife
3" Wide Ink Knife
Goop Scoop-Gallon Size
Mfg List
MBP
Price
$1.50 each $.81 each
$1.75 each $.95 each
$1.90 each $1.03 each
$4.50 each $2.25 each
Make clean-up easier, faster and more cost
effective with Performance's Pallet Protek.
It works like a "disposable tablecloth" for your
pallets. Put a piece of Pallet Protek on your
pallet. Mess it up with spray adhesive, lint
buildup and ink. Then, rip it off and put on
a new piece of Pallet Protek. It takes less
than a minute and eliminates solvents, rags,
and wasted cleanup time. Spend more time
printing and less time cleaning with Pallet Protek!!
Pallet Tape
Reusable-Wipe Clean With A Rag
Cheap Enough To Throw Away
Solvent Resistant
PALLET PROTEK 23
FLASH CURING? NO PROBLEM!
Easy to apply and remove. No adhesive residue!
No more solvents warping your pallets!
LESS LABOR, NO RAGS, NO SOLVENTS!
HOW TO APPLY PALLET PROTEK
1
2
Discounts: Ink Tools 5% buy 12 dozen 10% buy 25 dozen
SLICK NoSCOOP
Sharp Edges
Monkey Thumbs
Pick Up Buckets
Doesn't Rust
3" Wide Blade
Wipes Clean Easy
Doesn't Bend
#SS3
$8.95
EMPTY INK BUCKETS
Special "Vapor-Lock" lids can be opened
easier by hand with no cutting required.
Perfect to use for mixing custom ink colors
and saving modified inks for future use.
with LIDS
ITEM #
DESCRIPTION
MBP PRICE
EMPTY BUCKET w/ LID-QUART $1.49 each
GEB EMPTY BUCKET w/LID-GALLON $3.95 each
QEB
Discounts: 5% buy 25 buckets 10% buy 100 buckets.
APPLY PALLET PROTEK ONTO PALLET. LEAVE
ENOUGH TAPE TO HANG OVER PALLET.
3
3
WHEN ALL FLAPS ARE SECURED, YOUR
PALLET IS READY TO BE USED.
ITEM #
SQUEEGEE PROTEK TO A FLAT SURFACE, TUCK
EXCESS SECURELY UNDERNEATH.
YOU CAN NOW SPRAY ADHESIVE ON TOP OF
PALLET AND BEGIN PRINTING.
DESCRIPTION
Our Price
PP18 PALLET PROTEK 18"x100yd Roll $54.95
PP24 PALLET PROTEK 24"x100yd Roll $73.25
BAR BOB'S ADHESIVE REMOVER $18.95/qt $58.95/gal
Discounts- 5% buy 2 rolls, 10% buy 4 rolls 5% buy 4 gallons 10% buy 8 gallons
ADHESIVE REMOVER
NEW
For those of you who still don't use pallet protek, try our
BOB'S Adhesive Remover. It's biodegradable, citrus based
formula really cuts through adhesive fast. Works great on
pallets, printing presses and anywhere you have spray
adhesive to clean up. When your mess is "Sticky Icky"
we'll clean you up in a "Quicky".
Roller Frames
25
The Locking Strips Are Already Glued To The Mesh
Just Click Them In Place And Turn The Rollers!
Eliminates Need
To Pre-soften Corners
NEW
"The Original and Still the Best Retensionable Frame!" SPECIAL
USED MZX
1-11
12
48 Prestreched 12 Frame
Model Type Size Frames
Frames Frames w/ Mesh Starter Kit
M-ZX Manual 18"x20"id $38.84 $37.84 $35.84 $53.95* $1,294.99
M-ZX Manual 23"x26"od $43.60 $42.60 $40.60
Call
$1,366.63
M-ZX Manual 23"x28"od $47.98 $46.98 $44.98
Call
$1,424.71
M-ZX Automatic 23"x31"od $56.50 $55.50 $53.50
Call
$1,595.00
M-3A Automatic 23"x31"od $78.25 $77.25 $75.25
Call
$2,496.00
18x20id
FRAMES
$21.95
Sold by the dozen only. Limited time offer.
*Prestretched MZX18x20 available with yellow "Newman Roller Mesh" in 88, 115, 166, 205 mesh. Add $12 for 300 mesh.
2
7
5
3
4
6
For Newman
& Diamond Chase
Roller Frames
In very nice, clean condition.
Assembled,with locking strips. no mesh.
Starter kits include: 12 frames, Newman model 2E tension meter,12 set of fabric protectors,
magnesium wrench, socket, torque wrench, roll locking strip, clips, corner softening tools,
1 roll purple Newman Roller Tape, instruction book, logs and charts.
1
Up to 80% Less Labor
1 MZX/M3 Wrench $138.60
2 Basic Torque Wrench $76.50
3 MZX Dual Clamp Adapter $12.00 each
4 M1 Metal Clamp Adapter $9.50 each
5 Corner Softening Tool $2.89
6 Alignment Clips (6 pcs) $19.80
7 Locking Strip (50 ft roll) $77.59
5/8" MZX High Torque Socket $15.12
3/4” M3 High Torque Socket $15.12
NEWMAN ROLLER NEWMAN SCREEN
MESH by saati STRETCHING TABLES
MZX
23x31 MZX/M3
MZX
MZX
MZX Must specify MZX or M3
18x20 id
18x20 id
MESH 1-24 Panels 25-75 PCS 23x26 Add 23x28 Add 1-24 Panels 25-75 PCS
60 W
$15.77
$18.85
$15.37
$18.38
+$1.50
+$2.40
83 W
$15.94
$19.94
$15.54
$19.45
+$1.50
+$2.40
110W
$15.31
$18.46
$14.93
$17.99
+$1.50
+$2.40
123W
$16.22
$19.72
$15.82
$19.22
+$1.50
+$2.40
156Y
$16.92
$20.69
$16.50
$20.17
+$1.80
+$2.88
195Y
$18.32
$22.64
$17.87
$22.08
+$1.80
+$2.88
230Y
$21.55
$27.14
$21.01
$26.47
+$3.00
+$4.08
255Y
$21.72
$27.38
$21.18
$26.70
+$3.00
+$4.08
280Y
$21.94
$27.67
$21.39
$26.98
+$3.00
+$4.08
305Y
$24.13
$30.73
$23.53
$29.96
+$3.00
+$4.08
330Y
$28.84
$37.27
$28.12
$36.34
+$3.00
+$4.08
Roller Frame Stretching
NEWMAN ROLLER
FRAMES
24
Mix and Match Mesh Counts and Sizes For Best Discount
TENSION METERS
Newman Model 1-E
Newman Model 2-E
NEW
ACCELERATOR
Rotating Tensioning Device
FOR HIGHER TENSION
30+ NEWTON PRINTING
Mesh Color 1-9yds 10-29yds 30+yds
N88
N115
N128
N166
N205
N272
N300
yellow
yellow
yellow
yellow
yellow
yellow
yellow
$24.29
$24.77
$27.48
$29.21
$34.67
$47.08
$53.63
$21.94
$22.31
$24.77
$26.32
$31.24
$42.46
$48.29
$18.56
$18.83
$20.97
$22.26
$26.11
$35.92
$40.87
Full bolt (55-70 yard) discounts are available
60"Wide Is Stock (80" wide and
other mesh counts are available).
Model LX
for MZX18x20
or 23x26
$2,825+$165 crating
Requires compressed air to operate
(compressor not included)
NEW
Perfectly Flat Screens
Save Time and Energy
Patented Precision Rotation
Now you can tell how tight newly stretched
or reclaimed screens really are.
Accurate, detailed prints require a high tension screen
Multi-color registration is dramatically improved when
each screen's tension matches the others.
PRINT QUALITY with the Newman Tension Meter!
FREE CARRYING CASE WITH METER
ITEM #
DESCRIPTION
MBP Price
2-E
130 Newton Tension Meter, + or - 2% $359.00
1-E
130 Newton Tension Meter, + or - 1% $465.00
F.O.B. Snohomish, WA
Model
DESCRIPTION
Price
250
500
MZX 18x20id w/Square Bar
MZX & M3 18x20id up to 25x36od
$1,599
$1,899*
*On Model 500 Add $150 for MZX Square Bar Adapter if Required
26
WIPING CLOTHS
"THESE WIPES LOVE TO EAT PLASTISOL!"
Wipes
Clean Squeegees & Screens
White Non-Woven Wipes
Absorbent and Low Lint
Inexpensive and Effective
Assorted Sheet Sizes
13 Pound Box
Wipe Thickness May Vary
Note: Our wiping cloths may vary in size,
thickness and quality. To keep the price
reasonable we purchase this material as
over runs, odd lots, end cuts and seconds.
It's a great value, but every box is different.
FOR CUSTOMER SAMPLES AND DISPLAY
Available in: White,
Black or Half-n Half
Won't Shrink
Under Flash!
Now packed in a UPS
friendly 13 lb box
(no dim wt surcharge)
Display Your Prints
On Squares
Have Customers Sign
Off On One
Excellent For MultiColor Registration
Won't Stick To Pallets 14"x16"
After Printing.
Sheets
SETUP WITH REAL
T- SHIRT MATERIAL
ASK FOR A FREE SAMPLE
22” Long
ROLL WIPES
ONLY ABOUT
9 CENTS PER
TEST PRINT
Jumbo Roll
Easy to Use
8 Inches Wide
Absorbent
Durable
DESCRIPTION
Approx. 125 tubes per case.
That equals 1000 test prints.
Item# Quantity
Mfg. List Our Price
MBP Price
Pw13 WIPING CLOTHS-13 LBS $60.00/box $30.95/box $29.95/box
RW ROLL WIPES-250 ft x 8 in $8.95/roll $6.75/roll $5.95/roll
Discounts- 5% buy 5 cases of wiping cloths.
5% buy 4 rolls, 10% buy 8 rolls of roll wipes
2.0 oz Rayon
TEST TUBES
New! New! New!
ITEM #
FREE
SAMPLES
AVAILABLE
TFW500*
TFB500
TFWB500
TFR500
TT25W
TT25L
TT25D
TT25B
500 sheets
500 sheets
500 sheets
500 sheets
25 pounds
25 pounds
25 pounds
25 pounds
Test Materials
Best
Seller
TEST PRINT SQUARES 27
Our TEST TUBES are actual tubular shirt
material, so your test print looks just like the
real thing. Keep spinning the fabric around
the pallet until all the blank areas are printed.
Then, turn it inside out and start again. When
the TEST TUBE is all used up, cut it into rags
to clean screens.
Description
White Test Squares 14"x16"*
Black Test Squares 14"x16"
1/2 White,1/2 Black Test Squares 14"x16"
Ash, Red, Jade,
Rainbow Test Squares Natural & Royal
White Test Tubes
Light Test Tubes (assorted colors)
Dark Test Tubes (assorted colors)
NEW
Black Test Tubes
Our Price MBP Price
$82.95
$82.95
$92.95
$109.50
$121.95
$103.50
$103.50
$105.95
$81.50
$81.50
$91.50
$108.25
$121.95
$103.50
$103.50
$105.95
*Also Available 16" x 18" White-Add $27.50
Discounts- 5% buy 4 cases 10% buy 8 cases (OK to mix and match everything on this page)
28
WOOD BOARDS
WARNING! You'll make more money when you
use this numbering system on team uniforms.
$16.50
7"x7" Square
$17.75
10"x10" Square
12"x12" Square
$21.95
12"x12" w/ Neck
$31.45
15"x15" Square
$24.95
15"x15" w/ Neck
$34.75
15"x18" "V" Neck
$39.95
Same as Workhorse/Odyssey part#12120, but lower priced
18"x18" Square
$30.95
18"x18" w/ Neck
$38.75
5"x18 Sleeve Board $19.95
8"x28" Leg Board
$36.75
BRACKETS (Max Bracket I.D.)
National #NP0140 (3.00"W1.25”H)
$47.95
Workhorse #12200 (2.50"Wx1.50"H) $55.00
Odyssey #12200 (2.50"Wx1.50"H)
$55.00
Jennings#JENBRACKET(3.1"Wx2.5"H) $52.00
Raceway#PB1X3 (3.00"Wx1.00"H)
$25.00
ALUMINUM BOARDS
For Any Automatic or Manual
Printer. White rubber top is
standard. Call us for a quote.
Fits M&R, MHM, Tuf, Anatol & more.
TM
Print Pockets With Ease!
The Heavyweight Stainless
Steel POCKET MASTERTM
Solves Multi-Color Pocket
Printing Problems. Try
POCKET MASTERTM On
Fanny Packs, Sleeves and
Other Hard To Print Items.
A Great Invention!
POCKET MASTER
ITEM #
DESCRIPTION
MBP Price
PM POCKET MASTER $47.95
3 5/8"x5" Platen Size
Discounts- 5% buy 2 10 % buy 4
VACUUM PLATEN
SIZE
4"
6"
8"
Bracket will fit: Hopkins, Workhorse, Odyssey, Chaparral
Phoenix, Jennings and Royal.
Will not fit: Hix, Atlas, Harco, Lawson, National, Antec,
Vastex, M&R or Ranar without customer modification of
the bracket.
DESCRIPTION
PACK
KIT
DISPOSABLE PAPER NUMBER STENCIL $13.08 $124.95
NUMBER MASTER
$695
This 18" x 24” see through platen is
drilled with hundreds of vacuum holes.
Includes vacuum motor and on/off foot
switch. Bracket fits max 1.75"Hx2.5"W
pallet arm. Drop ships from mfg.
VACUUM PLATEN, MOTOR & FOOT SWITCH
NOTE: Please specify number 1's for left or right
when ordering. Numbers 6 and 9 are the same.
12% buy 8
Add a vacuum platen to your printer
and the whole new market of flat
substrates (heat transfers, bumper
stickers, signs, posters, etc.) is yours
for the taking.
#12513
ONLY 1 SCREEN TO CLEAN!
STARTER KIT
KIT CONSISTS OF: 200 number 1's
ONLY PENNIES A SHIRT TO USE!
1 pack for left
NO EXPENSIVE NUMBERING
1 pack for right
EQUIPMENT NEEDED! 100 each of: 0,2,3,4,5,6,7,8
EASY TO USE!
Number Printing
Special Platens
These are OEM quality
wood boards with white
heat resistant laminate
tops. Brackets available.
NUMBER STENCILS 29
#NM
An easy to use numbering system
comes with a master frame,
11 stretched screens, a scoop
coater and 2 squeegees.
Coat and expose the screens from
number film positives you supply.
Screens are inside dimension of 12 5/8” tall x 6” wide
Outer Frame is 20”tall x 21.5” wide
$375
Extra Set of 11 Screens is available #NMES $175
PreScreen
Flash Cure Prepress film registration system
Precreen system was designed as
Cool Down The
an economical alternative to carrier sheet
System
or pin type registration systems. The system
allows you to line up all positives for a job
Exclusive Air Curtain
Speeds production by
spraying a silicone solution
along with compressed air.
Reduces the need for cooldown stations and speeds
up production dramatically.
PACKING TAPE & GUNS 31
We're talking about the clear tape you use to seal
cardboard boxes when you ship them. Packing tape
isn't a screen printing supply, but it's something
we're sure you use every day. We have the lowest
price around, so why don't you add a case to your
order today! Use it to tape over shipping labels too!
in the correct screen location, minimizing
the amount of on press adjustment and
registration required. From simple one
color jobs to complex multi-color art, you'll
get the job done quickly and easily. Does not
require registration marks or crop marks.
HEAVY
DUTY
GUNS
Automatic
Portable
Economical
Easy to use
Exclusive Air Curtain Spray Head
$39.95
#PRESCREEN
!
Ideal for touching up film positives. The medium point is good for
broad coverage and easily fills pinholes.
The fine point is ideal for detail work.
Quick drying opaque ink.
$3.95
BLOCKOUT
PEN
by FIRST PRINT
Now Made of Steel!
Tee-Square
Special design for T-Shirt printers. Black background
with white lines. Easy to see through screen emulsion
when squaring up jobs on press. 16” Long x 4” Wide
$29.95 #TS
Pressurized- Works Upside Down
Touch-Up Pinholes Easily
Pen Fills Up to 2000 Pinholes
For Use with Plastisol Inks
Water Soluble/Reclaimable
Dries in About a Minute
#BOPNEW
$8.25
Discounts: 5% buy 1 dozen
10% buy 6 dozen
TONER
AIDE
Just a light spray on
Vellum Paper or Laser
Film Positive and the
toner is noticeably
darkened.
Screens will burn much
better and image quality
is greatly enhanced.
#TA
$9.97
DESCRIPTION
MBP PRICE
PT2
PT3
PTG2
PTG3
2"x110 yd PACKING TAPE
3"x110 yd PACKING TAPE
2" TAPE GUN-Heavy Duty
3" TAPE GUN-Heavy Duty
$2.03/Roll
$3.05/Roll
$14.75
$18.95
Discounts: 5% buy 4 cases
Use them to pre-register
multi-color jobs.
LITHOPAQUER
PENS
ITEM #
10% buy 10 cases
FOR SCREEN PRINTING BLOCKOUT TAPE
SEE PAGES 8 AND 9.
Don't Forget!
PMS BOOK
PANTONE is the standard in color
communication among artists,
graphic designers and unfortunately screen printers. No, the
colors in this book can't be
matched exactly on T-Shirts
and no the color formulas don't
work well with plastisol. But,
this is the only widely used
method of communicating
colors, so we're stuck with it.
Buy this guide and give it to
artists and ink mixers to use
as a tool.
.
ITEM #
DESCRIPTION
PMS PMS COLOR GUIDE
MBP PRICE
$148.95
2 BOOK SET
$1,995
Silicone Concentrate 4 Quarts For $80
1 Quart Mixed With Water Makes 5 Gallons.
Clear Plastic
Layout Sheets $54.95
1 4 ' x 1 7 " 100 Sheets
Lowest Advertised Price
Heavyweight Tape
Strong Adhesive
Made in U.S.A.
Available in Clear Only
36 Rolls/Case for 2" Tape
24 Rolls/Case for 3" Tape
Embroidery
Packing Tape
Misc Printing Tools
30
EMBROIDERY SUPPLIES
KK100 Adhesive
COATS BOBBINS
Best in class product.
Non-toxic, odorless, colorless.
Strong bond is repositionable.
Will not build up on needles.
$54.75/gross
Discounts: Less 5% buy 12 cans
#40 RAYON CONES
White $9.70
Black
$9.85
Colors $10.55
Metallic threads also available.
MADEIRA THREADS
POLYNEON #40 CONES
White
Black
Colors
$6.75
$6.9 5
$ 7.60
EVERY COLOR OF #40 RAYON
IN
STOCK.
NEARLY
300
COLORS!
This wholesale pricing is only available to commercial embroiders and screen printers.
Size 15 Style "L"
WHITE
Size 15 Style "L"
BLACK
$69.95/gross
Size 15 Style "M"
WHITE
$69.95/gross
CONE OF BOBBIN THREAD
BURMILON WHITE #303-301
$7.75
DAMN GOOD BOBBINS
Performance closest
to C**TS bobbins,
we have ever seen.
Save a ton of money
using this super high
quality import bobbin.
If you don’t agree, we
offer a money back
guarantee!
Embroidery
$8.25 can
MADEIRA THREADS
33
Size 15 Style "L"
WHITE
$29.95/gross
BEST VALUE
LB5 Spray Lubricant
Specially designed for
embroidery machines.
No-Staining, No-Gumming
$8.80 can
MADEIRA
#157-5
Embroidery
32
EMBROIDERY
BACKINGS
EMBROIDERY
SUPPLIES
We Stock These Needles:
Better Backing. Better Embroidery
Item #
Size
Hv202019100 19" x 100yd roll
HV202066
6" x 6" Sheet
HV202088
8" x 8" Sheet
HV302048
4" x 8" Sheet
HV992519100 19" x 100yd roll
HV99251515 15" x 15" Sheet
HV992566
6" x 6" Sheet
HV992588
8" x 8" Sheet
Quantity
1000 pcs
1000 pcs
1000 pcs
500 pcs
1000 pcs
1000 pcs
The best tearaway and
cutaway backings in the
industry. Samples and
spec sheets are available.
MBP Price
Description
#2020 Tearaway Backing 2.0 oz/yd $56.94
#3020 Stiff Tearaway Backing for Caps 3.0 oz/yd $52.98
#9925 Cutaway Backing 2.5 oz/yd
$79.30
#9925 Cutaway Backing 2.5 oz/yd $138.74
$49.16
$80.32
Discounts: 5% buy 4000 Sheets/4 Rolls 10% buy 8,000 Sheets/ 8 Rolls (OK to mix and match)
SOLVY-Water Soluble Topping PEGGY'S STITCH ERASER
Solvy film is a great topping for towels,
golf shirts and sweaters. Just put a layer
of Solvy on top of item when you hoop it.
When embroidery is done, tear away
as much Solvy as you can. Any small
pieces which are left will dissolve during
the first wash (or steam them away).
Solvy works wonders sewing difficult items.
It stabilizes the fabric & dramatically
improves the detail of the embroidery.
Remove stitches
in fabric without
any damage to Replacement blade available
the material!
#PSE3RB $21.25
#PSE3
$80.95
ITEM #
Description
MBP Price
SOLVY8X8 Solvy Topping 8"x8" 495 Sheets $31.95
SOLVY10X110 Solvy Topping 10"x110 YD Roll
$36.95
NOSHOW6100 No-Show Backing 6"x100 YD Roll $28.95
NO-SHOW Backing
Nylon Mesh Backing is very soft, sheer
and translucent. Minimizes “Show-through”
on golf shirts and lightweight fabrics.
16X257 Sharp #10, #11, #12
16X257 Ball Point #10, #11, #12
DBXK5 Sharp #9, #10, #11, #12
DBXK5BP Ball Point #9, #10, #11, #12
287WKH Sharp #10, #11, #12
287WKHBP Ball Point #10, #11, #12
DBX7ST (for metallics) #11
Needle Specs:
16X257 is the standard sewing machine needle. It was
originally designed for high speed sewing and does fine
for that purpose.
DBXK5 is becoming the needle of choice for embroiders.
The eye is one size larger than normal, allowing thread
to pass more easily, without fraying or snapping. This
needle is basically a 16X257 only with a larger eye.
287WHK is basically a 16X257 with a shorter point. Used
mostly on older Barudan machines.
DBX7ST has a larger rectangular eye that allows metallic
threads to pass more easily.
# Description MBP Price
SCISSORS Item
16X257 Organ Needle-100 pack $17.25
#634 Specialty
Embroidery
Scissors
#F9921 FISKAR
SOFTOUCHSHEARS
SCISSORS
SOFTOUCH
Best
Seller
#M601 MUNDIAL
THREAD CLIP
#290/5I or
#390/4 LARGE RING
VERSION OF #290
35
Embroidery
Embroidery Backings
34
#M102 MUNDIAL
EMBROIDERY SCISSORS
(avail. in 3 1/2" or 5")
DBXK5
287WKH
DBX7ST
M102-35
M102-5
M601
290/5I
390/4
634/35
F9921
Organ Needle- 100 pack $17.25
Organ Needles-100 pack $23.50
Organ Needles-100 pack $28.50
3 1/2" Scissors
$12.95
5" Scissors
$14.85
Thread Clips
$7.98
5" Curved Scissors
$13.45
4" Large Ring Curved $13.45
3 1/2" Short Narrow Curved $10.87
5" Softouch Scissors $16.75
36 HIX
HEAT TRAN
S450P
HT400P
AUTO OPEN
15"x15”
DELUXE
15"x15”
SFER MACHINES 37
S650P
HT600P
AUTO OPEN
16"x20”
DELUXE
16"x20”
The most reliable Auto-Opening machine on the market.
Requiring no air feed, this semi-automatic press utilizes an electronic release. Hands free opening saves time and allows the user
to apply more transfers with less effort. Auto reset digital timer, full
range pressure control, thermometer (up to 450 deg) & heat
indicator light. Weight 84lbs 120 Volts 12.5 Amps
Sets the standard in the manual heat press industry because of its
ruggedness, durability and years of trouble free performance. New
handle provides 20% more pressure. Floating lower platen gives
perfect alignment on all items up to 1" thick. Features include autoreset digital timer, full range pressure control, thermometer (up to
450 deg)& heat indicator light. Weight 79lbs 120 Volts 12.5 Amps
$1,280 $985
Swing away design for easy layout
away from the heat. Full range
pressure control for items up to 1"
thick. Temp goes up to 400 degrees.
Includes heat indicator
light, easy to use
pressure lever and a
sturdy support base.
Economical and
perfect for the hobbyist
who wants to apply
inkjet,sublimation
and flock
transfers.
Weight 28lbs
120 Volts, 7 Amps
Cap Press
9”X12’’
HL912
Hobby Lite
B250D
$640
Turns caps into walking advertising for your customers ,teams and more!
Sturdy design with a strong support base. Interchangeable 3”x5 ½” lower
platen for golf caps is included. (3 3/4” x 5 7/8”for baseball or 2 3/4” x 5 1/4”
for youth are $67 each). Includes pressure adjustment, 60-second auto reset
timer, thermostat (0-450 degrees) and handy cap attachment. Included teflon
blanket holds transfers and numbers in place. 120 Volts 4 Amps
$299
$695 Mug Flat
Press
FH3000D
Turn mugs into profit! Simple to
use analog timer and temperature
contols. Rapid heat up from idle
temperature. Heater design is
durable and long lasting.
Compact, sturdy and
portable for malls, flea
markets, shows & more.
Weight 19lbs
120 Volts 4.2 Amps
EP565
Press
$755
3-3/4"x6-1/4" Flat Press is
great for umbrella,pockets,
sleeves, cuffs,
collars, bags,
name badges,
luggage tags,
tiles, gloves &
much more.
Optional cube
attachment for
doing cube
shaped items.
Weight 32lbs
120 Volts 4 Amps
Best
Seller
The most reliable Auto-Opening machine on the market. Requiring
no air feed, this semi-automatic press utilizes an electronic release.
Hands free opening saves time and allows the user to apply more
transfers with less effort. Auto reset digital timer, full range pressure
control, thermometer (up to 450 deg) & heat indicator light.
Weight 95 lbs 120 Volts 14.5 Amps NEMA 5-20 20A Plug
The workhorse of the manual heat press industry that is rugged and
durable for years of trouble free performance. New handle provides
20% more pressure. Floating lower platen gives perfect alignment
on all items up to 1" thick. Features include auto-reset digital timer,
full range pressure control, thermometer (up to 450 deg)& heat indicator light. Weight 91lbs 120 Volts 14.5 Amps NEMA 5-20 20A Plug
Commercial
Air-Automatic
16"x20”
Swingman 20” X 25”
$925 $1,170
$1,490
N880D
SM25P
Air assist helps reduce operator fatigue. Features include autoreset timer, psi pressure setting, thermometer, thermostat, heat
indicator light, and pre-press release button. Optional Shuttle
Attachment (see below) significantly increases output. Customer
must supply air compressor.
Weight 137 lbs 120 Volts 14.5 Amps NEMA 5-20 20A Plug
220 Volt unit is available for $45 extra charge
Huge 20” x 25” size opens up a world of new possibilities for
oversized transfers. SM25P produces an astounding 1200 lbs.
of downward force. Not only can you press larger items but the
increased size also allows you to press multiple smaller items
in one press, perfect for increased production!
Weight 135 lbs 220 Volts 14.5 Amps
Ships by Truck Only
Heat Transfer Machines
Heat Transfer Machines
Best
Seller
$2,690 $3,155
Shuttle Attachment
For use with the air automatic N840 or C800 heat transfer
machines. Significantly increases the production output by
providing two work stations. Allows operator to layout the
next product while one is still transferring. Heavy duty
shuttle blanket is constructed of Teflon coated fiberglass.
Mounts easily into existing holes already
drilled into the machine.(heat press is
not included)
$623
38 SUPER
DUPER
TRANSFER PAPER
Heat Transfers
*Recommended For: Cold Peel, Hot Splits, Plastisol
Puff, and Glitter & Metallics
*Coated on Both Sides For Superior Transferability
*Shrinks Less Than Other Papers
*Releases More Ink When Peeled Hot
*Peeled Cold, Leaves Just Enough Ink To Avoid the
Rubbery Feel of Conventional Cold Peel Transfers
*Available in 15" x 15" Sheets. 500 Sheets per Pack
ITEM #
HTP500
DESCRIPTION
Inkjet Cold/Hot Peel
Use with most ink jet printers (No special
cartridges required). Transfer images
to T-shirts, sweatshirts, aprons or just
about any light colored cotton, 50/50 or
polyester fabric. For best results, use light
colored material with a smooth surface.
Inkjet Dark
Single-Step InkJet Transfer Paper- for
transfer to dark fabrics. Can be hand
ironed or heat pressed. EASY to use,
excellent brightness and color retention
after washing. This paper leaves a white
square on the shirt (it can be trimmed).
Mfg. List
SUPER DUPER HEAT TRANSFER PAPER 119.65
MBP Price
Laser Transfer Paper
$95.32
Premium Color Laser Copier Heat Transfer
Paper. This product works for a variety of
color laser copiers and color laser printers
that use fuser oil. Peels HOT or COLD.
For tranfers onto white and light colored
garments.
Discounts- 5% Buy 4 Packs
Teflon Sheets
16"x20" White Teflon Sheets are"see-through" to
make layout easier. Keep transfers fromsticking
to transfer machine. Eliminate product scorching.
Reusable over and over again.
TransferWear Econo CLC
#HTS1620
$11.50
TRANSFER POWDER
HOT MELT ADHESIVE
"MAKING GOOD PLASTISOL HEAT
TRANSFERS JUST GOT EASIER"
Apply to Transfers After Printing
Locks Onto Transfer For a Tenacious
Bond. Also Brightens Colors!
Fine Lines Don't Get Lost or Pull Off
Transfers Take Less Time, Less Heat
and Less Pressure
Available In 1 or 25 Pound Containers
ITEM #
MBP Price
DESCRIPTION
WSA16 HEAT TRANSFER POWDER-1 Pound $21.95
WSA25 HEAT TRANSFER POWDER-25 Pounds $459.95
Discounts- 5% Buy 4 containers
TransferWear CLP
High quality digital transfer paper. Designed
for use in laser printers that DO NOT USE
FUSER OIL, such as the HP4500 and 4600
series, Canon Image Class 2100. For
transfers onto white and light colored
garments.
High quality digital transfer paper at an
economical price. Recommended for
cassette feeding in most high speed color
copiers and laser printers that use fuser oil.
For transfers onto white and light colored
garments.
TransferWear Dark
A single step color laser copier transfer paper
for transfer onto dark fabrics.Can be hand
ironed or heat pressed. EASY to use, excellent
brightness and color retention after washing.
This paper leaves a white square on the shirt
(it can be trimmed). Fuser oil printer required.
Item #
JWj
JWD
LT
TWE
TWCLP
TWD
Description
Inkjet Cold/Hot Peel Inkjet Transfer Paper- 100 Sheets
Inkjet Dark Inkjet Transfer Paper- 25 Sheets
Laser Transfer Paper-100 Sheets
TransferWear Econo CLC Transfer Paper-100 Sheets
TransferWear CLP Transfer Paper-100 Sheets
TransferWear Dark Transfer Paper-25 Sheets
8.5x11" 11x17"
$49.95
$26.95
$34.95
$25.95
$68.95
$24.95
$99.90
$53.90
$69.90
$137.90
$49.90
Discounts: 5% buy 5 packs 10% buy 10 packs (OK to mix sizes for discount)
Transfer papers are not returnable. The manufacturer will replace any paper proven to be defective.
Digital Transfer Papers
FOR SCREEN PRINTED PLASTISOL TRANSFERS
DIGITAL HEAT 39
TRANSFER PAPER
Perfect Registration, Halftone Dots, Dense Black
40
VELLUM PAPER can take the place of a film positive. Print
your artwork on a sheet of VELLUM PAPER using your laser
printer or photocopier. Expose your screen using VELLUM
PAPER like you would use a film positive. VELLUM PAPER
is sturdy enough to make it through the production cycle and
suitable for art file storage of up to one year.
$595
Save $$$ and Time
Reduce Darkroom Expenses
Go From Laser Direct To Exposure Unit
16 Pound Vellum Is Easy To Expose
Not For Use With Inkjet Printers
FastINK is the best ink on the market for film output
on Epson inkjet printers. Our FastINK Dye Ink is
specially formulated for printing on clear film and is
designed to be quick drying, scratch resistant and
have excellent UV blocking characteristics.
Best
Seller
NEW
Ask us if you don’t see your EPSON printer listed below.
Item #
Price
Description
US1800MTBLKD18U FASTINK EPSON R1800 DYE Black 18ml
$24.50
$59.95
HINT
Increase exposure time by 25% when using vellum.
To get really dark toner, run printed sheets through
your conveyor dryer along with your shirts or use clear
spray fixative or Toner Aide to increase density.
Store vellum in a zip lock bag to keep moisture from
affecting the paper's printing performance.
US3000BLKD110
FASTINK EPSON 3000 DYE Black 110ml
US479BLKD220U
FASTINK EPSON 4000/7600/9600 DYE Black
US48LBLKD220U
FASTINK EPSON 4800 Light Black 220ml
$89.95
ITEM #
US48LLBLKD220U
FASTINK EPSON 4800 Light,Light Black 220ml
$89.95
VP811 8 1/2" x 11"- 100 sheets
$18.67
VP814
8 1/2" x 14"- 100 sheets
$21.34
$20.33
VP1117
11" x 17"- 100 sheets
$35.73
$34.03
VP1218 12" x 18”- 100 sheets
$38.16
$36.34
VP1319 13" x 18.5”- 100 sheets
$43.63
$41.55
220ml $89.95
WaterProof vs. Non-Waterproof Film
So..which film do you need? It really depends
upon your needs. If you want to use off-the-shelf
pigment inks that come with Epson 2200, R1800
and 4000/4800, then WP is a must. If you have high
humidity or just don’t want to worry about images
getting smeared, then again WP is for you. If you
are looking for an affordable solution and are using
Epson 3000 or 1520 DYE ink or FastINK dye ink, then
our Non-Waterproof film is fine. If you have problems
with in drying because of humidity or just the pressure
of getting a job on press right now, then WP is the best
choice. The special microporous coating on WP causes
the ink to dry IMMEDIATELY!
FastPOSITIVE SIZE
WaterProof
Non-Waterproof
$89.95 FASTPOS811
8 1/2" x 11"- 100 sheets FASTPOSWP811
8 1/2" x 14"- 100 sheets FASTPOSWP8514 $110.95 FASTPOS8514
$39.95
11" x 17"- 100 sheets
FASTPOSWP1117 $169.95 FASTPOS1117
$79.95
13" x 18”- 100 sheets
FASTPOSWP1318
13" x 100 Feet Roll
17" x 22”- 100 sheets
17” x 100 Feet Roll
FASTPOSWP13100R $149.95
Discounts: 5% buy 5 packs
$49.95
$210.95 FASTPOS1318 $99.95
10% buy 10 packs (OK to mix sizes for discount)
Our Price
MBP Price
$17.78
TONER AIDE
Just a light spray on Vellum
Paper or Laser Film Positive,
after you print it, and the toner
is noticeably darkened.
Screens will burn much better
and image quality is greatly
enhanced.
Best
Seller
Note: This product contains solvents that dissolve the toner, allowing it to flow
and fill in any voids. While these solvents are essential to the performance of
Toner Aide, they have an odor which may be objectionable to sensitive noses.
We recommend using in an open area with adequate ventilation.
ITEM #
$159.95
$179.95 FASTPOS17100R $89.95
FASTPOS1722
FASTPOSWP17100R
NEW
SIZE
Vellum Paper
Ink Jet Film Positive
1520, 2200, 3000, R1800, R2400
VELLUM 41
PAPER
"GET OUT OF THE DARK WITH VELLUM"
TA
DESCRIPTION
TONER AIDE
Discounts: 5% buy 2 cans
MFG LIST MBP PRICE
$14.50
10% buy 12 cans
$9.97
LASER FILM POSITIVE
42
43
DENSITY
Computer-To-Film Technology
For Screen Printers
Excellent, Dark Toner Adhesion!
DURABILITY
Will Not Rip!
NEW
Laser Printer Stuff
Will Not Rip! Will Not Shrink!
Hint: Laser Film Positive is designed
to go through your laser printer. A
higher fusing temperature is required
to bond the toner to the positive so it
won't scratch off. Some copiers get
hot enough to do the job, but many
do not. Get a test pack + check it out.
NEW
CRYSTAL CLEAR LASER FILM
Now a Crystal Clear Film for Laser
Printers. It is the first truly clear film
that provides proper toner adhesion
and density on a laser printer.
Recommended for use with the
XANTE ScreenWriter 4.
LASER FILM MATTE CRYSTAL CLEAR
SIZE
TEST PACK 8 1/2 x 14-10 sheets LFPTEST
8 1/2" x 11"- 100 sheets LFP811
$5.50 CCTEST
$50.03 CC811
$51.08
8 1/2" x 14"- 100 sheets LFP814
$63.67 CC814
$65.01
11" x 17"- 100 sheets
NEW
LFP1117
LFP1218
12" x 18”- 100 sheets
13" x 18.5”- 100 sheets LFP1319
$100.06
$115.57
$128.68
CC1117
CC1218
CC1319
$5.50
$102.17
$118.01
$131.38
INK JET FILM POSITIVE
Our "Clear" Ink Jet Film Positive is a non-waterproof film. Designed to provide the
darkest black film positives. These films will also work in many ink jet printers, however
you must purchase a test pack to determine compatability with your ink jet first.
ITEM #
SIZE
Our Price
one per
customer
MBP Price
$5.50
IJFPTEST
FOR EPSON TEST PACK 8 1/2 x 14-10 sheets
IJFP811
For EPSON 8 1/2" x 11"- 100 sheets
$47.45
IJFP814
For EPSON 8 1/2" x 14"- 100 sheets
$60.39
$58.63
IJFP1117
For EPSON 11" x 17"- 100 sheets
$94.89
$92.13
IJFP1319
For EPSON 13" x 19”- 100 sheets
$125.35
$121.70
$46.07
IJFP1722
For EPSON 17" x 22”- 100 sheets
$189.81 $184.28
HPIJTEST
FOR HP TEST PACK 8 1/2 x 14-10 sheets
one per
customer
HPIJ811
For HP 8 ½" x 11"- 100 sheets
$62.64
$60.82
HPIJ814
For HP 8 1/2" x 14"- 100 sheets
$79.88
$77.55
HPIJ1117
For HP 11" x 17"- 100 sheets
$124.68
$121.05
HPIJ1319
For HP 13" x 19”- 100 sheets
$167.29
$162.42
$6.00
Starting at
$1,995
Xante Laser Printers
REGISTRATION
The Screenwriter 4 from XANTE is the perfect way to produce quality film positives
for your T-shirts and much more. Now able to print on clear film along with vellum
paper and laser film. The huge print area is up to 13"x35.5" to reduce tiling of films.
Print at 600x600 dpi, 1200x1200 dpi or 2400x2400 dpi for quality text, line art and
halftones. The Screenwriter 4 prints much darker than any other brand of laser
printer, because the print engine is purposely slowed down to allow more toner to
lay down on the positive. No laser printer prints as dark or dense as a XANTE.
True Adobe PostScript 3 ensures perfect halftones and compatibility with virtually
any graphics software and hardware environment. Connect to you computer with
the included USB, 10/100 BaseT Ethernet or Parallel port. Call for a complete
brochure and sample positive for you to burn.
ITEM
SCREENWRITER 4
SCREENWRITER 4
SCREENWRITER 4
SCREENWRITER 4
SCREENWRITER 4
dpi
MEMORY
Price
64 MB
600x600 dpi
64 MB
1200x1200 dpi
128 MB
1200x1200 dpi
256 MB
1200x1200 dpi
256 MB
2400x2400 dpi
Replacement Toner Cartridge For SW3 or SW4
$1,995
$2,395
$2,645
$2,845
$4,345
$239
45
Notice: Videos, Books and Software are NOT returnable. No Exceptions.
$995
Notice: Videos and Books are NOT returnable. No Exceptions.
Over 3,000 Users
in 70 Countries
Books and Videos
Fast Films
44
Plastisol Inks-How To Use
Learn the important aspects of using
Plastisol Ink in the garment screen printing
shop. Types of plastisols, using reducers
properly, working with extenders and bases,
ink mixing, proper curing techniques, using
high opacity inks, proper in viscosity and
much, much more!
#DVDPLASTISOL
$39.95 each
#DVDSHIRTTREAT
$39.95 each
#DVDFXHD
$39.95
$39.95
each each
Screen Printing Heat
Transfers
Learn everything there is to know about
making and applying heat transfers to
garments. Hot and cold peel transfers,
sublimation transfers, types of transfer
papers, proper curing and drying, mesh
selection and stencil systems, equipment
needed, making multi-color transfers...
$39.95 each
Business and Marketing
For Screen Printers
#DVDHEATTRANS
With Scott Fresner
Running a garment printing business in a
professional manner and good marketing
are the keys to being a success and this
course covers it all! Whether you are just
into the business or are trying to make a
profit in an existing business, this course
is a must. It covers everything from
creating your own catalog, to how to price
your work, getting larger accounts, getting
credit, giving credit all about the industry...
#DVDBIZMARKET
$49.95 each
#DVDPHOTOSHOP7
#DVDCOREL
$79.95 (4 DVD set)
$79.95 (4 DVD set)
STARTI
N
G
T-SHI
R
TSCREENPRI
N
TI
N
GBUSI
N
ESS
If you're just starting out, this course
How To Print T-Shirts For Fun & Profit This is the book the industry
talks about. It is responsible for getting thousands of T-Shirt printers into
the profitable garment printing business! Every successful shop has a
"well used" copy of this book. The book covers everything from A to Z
about screen printing T-Shirts and Heat Transfers, and includes sections
on printing Nylon Jackets, Baseball Caps and more. It tells how to set
up shop, where to find customers and how to run your business.
Beginning Garment Screen Printing (Run Time 120 minutes)
Richard Greaves, Printwear Magazine's technical editor, goes into the shop
to show you how it's done in this step by step guided tour through each
department of a successful garment printing shop (Art, Screen Making, Ink
and Printing). Greaves, punctuated by his trademark wit and wisdom,
finishes it all up by boxing up shirts for the customer with incredible
information along the way. Experienced screen printers will take advantage
of Greave's 20 years of experience in the industry with tips and techniques
that will transform the average screen-printing shop into the high-profit
apparel-graphics manufacturing business it should be. VHS TAPE
#TSPM $39.95 #VID1121 $59.99
is for you! If you already print, you'll
be surprised at what you don't know.
3 hours of instruction on 2 DVDs.
Artwork, screen making, job setup,
inks, printing, cleanup, #DVDGETSTARTED
safety marketing &
business ideas.
$49.95
46
LEASING EQUIPMENT?
Applications are online at www.performancecscreen.com
Garment Runner
Leasing is a great way to get the equipment you need to
startup or expand your business. We’ve worked with
dozens of leasing companies over the years and
Chris Pfriem is the best guy we know. Chris is honest
(no low ball quotes or hidden fees), has rock bottom
payments and really works to get applications approved.
CUT INK REMOVAL AND
RECLAIMING COSTS IN HALF
EASY AS 1-2-3
1. Scrape off excess ink, pull off tape
and place screen in dip tank.
2. Remove screen from tank and spray
with pressure washer to remove all
ink and emulsion.
Chris Pfriem
ECONO PRESS
#EP41
$574
Econo Press is a revolutionary
4-color/1-station bench model
printer. This new concept
design makes it possible to
have a high quality printer at
half the price. It features easy
off contact and has a
adjustment for any weight
screen and will accommodate
all of Livingston Systems
attachments. It comes with a
15" x 15" platen. It will
Options:
Floor Stand +$105
Extra Platen Bracket +$26
Micro Registration (per color) +$99
3. If stains or residue remain, apply
EasiSolv 901 Screen Wash/Stain
Remover/Degreaser to mesh and
spray with pressure washer.
3 Biodegradable!
Requires ½ the time & labor.
3 Non-flammable!
The
EasiStrip
dilutes 1 part chemical to up to
3 Non-toxic!
5
parts
water,
so
it only costs pennies per screen.
3 Low odor!
Small Shop Dip Tank Package
Large Shop Dip Tank Package
1-Poly Dip Tank 14 Gallons w/lid*
$160.00
3- Gallons EasiStrip Supra One Step $99.36
1- Gallon EasiSolv 901 Stain Remover $35.65
Total
$295.01
Holds 2 screens up to 23”x28” o.d.
1-Poly Dip Tank 37 Gallons w/lid*
$274.00
8- Gallons EasiStrip Supra One Step $264.96
1- Gallon EasiSolv 901 Stain Remover $35.65
Total
$574.61
Holds 3-4 screens up to 25”x33” o.d.
*Add Manufacturers $7 packaging charge
EasiStrip Reclaimer
800-830-0084 ext 204
fax 800-830-9855
ASK FOR OUR SPECIAL
PERFORMANCE RATES!
EASIWAY DIP & STRIP 47
*Add Manufacturers $7 packaging charge
GARMENT
RUNNER
$195
TM
From
CATCH....
MOVE....
STORE....
VERSATILITY....
A large volume of shirts, as they discharge from
any conveyor dryer, will fall into the Garment
Runner, up to 700 shirts in a 60” model. Use our
size separator option to keep sizes separated
within a bag for easy folding later.
Simply slide the bag off the back of your
Garment Runner without lifting it. A draw string
will keep the bag closed and your garments
clean, until you are ready to process your order.
A clear job pocket allows you to identify your
Garment Runners contents. Quickly install a new
bag and keep on printing.
With heavy duty commercial casters, your
Garment Runner will easily transport goods to
another area of your shop. Shirts can be boxed
and shipped efficiently or moved to the press
for additional printing
Simply remove the bag and your Garment Runner
transforms into a utility cart/box mover.
With its heavy duty commercial construction, the
Garment Runner will easily handle up to 500 lbs.
of cargo.
DESCRIPTION
ITEM #
SIZE SEPARATORS
A set of 6 large printed sheets (S,M,L,XL,
XXL & Blank) used to keep
sizes separated within the
Garment Runner Bag
#SSEP
$32
Remove the Bag and
Use Garment Runner
as Sturdy Rolling Cart
G-30
G-36
G-48
G-60
30” wide GARMENT RUNNER
PRICE EXTRA BAG
$195
$28
$220
$30
$289
$42
$359
$52
Ships by UPS, except G-60 ships by truck.
48
REPLACEMENT PARTS
Large selection of replacement
bulbs available for most brands
of exposure units and cameras.
Please call with part # listed on
bulb and equipment model #.
For Atlas 5-Way and National XP-5000
#FCM
IN STOCK
ITEM # Description
Price
FCM 1000 Watt Quartz Bulb $27.50
F20T12/BL 2 Foot 20 Watt Blacklight T12 $24.75
F40/350BL 4 Foot 40 Watt Blacklight T12 $27.75
GW114
L1250U
THS5027
10888
NUARC 1K Bulb
OLEC Replacement Bulb
THEIMER Replacement Bulb
AMERGRAPH 150 Bulb
$95.00
$275.00
$265.00
$225.00
A $7.50/box additional packaging charge applies
to bulbs. They require special packing to reduce
the risk of breakage in transit.
DRYER
PANELS
In Stock!
Black 72" wide live rubber
exposure unit material is
1/16” thick and similar to
tire inner tube material.
This provides a superior
seal compared to
neoprene type material.
In stock and sold by the
72" wide running foot.
HINT: Consider buying enough material that you can
split it down the middle and get two blankets for almost
the same price as one.
1HD/72 Exposure Blanket 72" Wide $74.95/ft
DRYER BELTS
OEM quality in a custom
made belt for your dryer.
Call with exact width and
total belt circumference.
3-5 days for delivery.
HINGE CLAMPS PALLET RUBBER
Turns any
table into
a 1-color
printer.
Great for
signs and
1 color
flat stock.
HC101 Hinge Clamps-Pair $28.95
White 36" wide 1/8” thick
pallet top rubber sheeting.
This is the same stuff used
on automatic press pallets.
In stock and sold by the
36" wide running foot.
HINT: We recommend using 3M #1357 adhesive to
apply pallet rubber to boards. 3M #1357 can be
purchased at www.grainger.com (Grainger #5E127).
PR36 Pallet Rubber-36" Wide $48.75/ft
Screen Printing Presses
Heat Transfer Presses
Direct-to-Garment Printers
Embroidery Hooping / Tracing
Improve Production Speed, Minimize Mistakes
Laser guidelines will dramatically reduce your set up time, speed
up your production and improve your accuracy. Laser Targeting
Systems offers the only complete laser alignment systems that
work in conjunction with your equipment to improve your
production and provide the highest quality of product. Whether
you do screen printing, embroidery, heat transfer or provide other
services, you will see immediately the impact of using a laser
system in your shop.
Customize a Laser Alignment System For Your Shop
Step #1: Choose a Control Panel
Single Control
(Only 1 Laser)
Manual Control
Automatic Control
(Up to 4 Lasers)
(Up to 4 Lasers)
Laser Systems
Replacement Parts
BULBS EXPOSURE BLANKETS
LASER ALIGNMENT SYSTEMS 49
$210.00
$25.00
$110.00
Step #2: Select the Number and Type of Lasers
Spot Laser
Line Laser
Crosshair Laser
$150.00
$70.00
$180.00
Step #3: Choose Optional Mounting Equipment
Floor Stand Table Clamp Bracket / Arm
Battery Box
Adapter
$40.00
$80.00
$35.00
$100.00
$80.00
Call Bob at 1-800-659-8337 for Help Setting Up
a Laser Targeting System for Your Shop.
50
26 Inch x 8 Feet
$4,600
WORKHORSE
30-11 POWERHOUSE
QUARTZ DRYER
#11226
+$225 Crating
52 Inch x 8 Feet
#10006 6 Color/6 Station
Mach Series All Heads Down
Manual Textile Printer
$6,400
+$275 Crating
Loaded With Quality and Features
Highest Watts/ Square Foot in It's Class
30 Inch x 11 Feet
Modular Design is Expandable (not 2608)
Optional Side Cap Element (2608 only)
+$275 Crating
Solid State Digital Temperature Control
40
Inch
x 13 Feet
Heated Air Recovery, Power Exhaust
Removable Oven Hood, Flash Phase
4-Point Belt Tracking w/Adjustable Speed
+$375 Crating
3 Foot Add-On In-Feed / Out-Feed-Optional 52 Inch x 17 Feet
$6,400
$8,200
$11.500
+$450 Crating
18”x20”
Automatic
115 VAC
#12512
18”x20”
Manual
115 VAC
#11100
#11000
Primus Flash Cure Units
MANUAL FLASH Gripper Jacket Hold Down
$825
$475
ONE HEAD DOWN
TO 6c/4s $3,450
4c/4sEXPANDS
6c/4s $4,400
TO 8c/6s $5,200
6c/6sEXPANDS
8c/6s $5,850
10c/8s $8,050
All Heads Down allows
several people to print
on the same machine at
one time. This can speed
up the production on big
jobs or allow multiple jobs
to be printed simultaneously.
If these features are not
important to you, then select
our classic One Head Down
design for maximum value.
ALL HEADS DOWN
4c/4s $4,000
6c/6s $5,850
8c/8s $7,400
Workhorse Equipment
Workhorse Equipment
POWERHOUSE MODULAR DRYERS
The original TOOL-FREE
adjustment press 51
Lease
the test of time
stands
Financing
as
'
professionals
Available
choice for strength
durability and ease of use.
+crating
Multi-Axis Pre-Leveled
Print Stations are all factory
leveled in all axis to ensure print
quality at all stations. Each station
is level and flush with the others,
side-to-side and front-to-back.
This feature is normally only found
on automatic presses. Also notice
the beefy support strut below the
print station. The pallets are rock
solid. The are not spongy and
absolutely do not flex.Your toughest
prints will look crisp and clean on
a Workhorse printer.
+crating
Optional Side Clamps provide support
for automatic size screens. What an awesome
sampling machine for the automatic shop.
Manual printers who gang up multiple jobs on each
screen will also love the versatility of side clamps.
Side Clamp Retrofit Per Color, 23" $200/color
Side Clamp Retrofit-Per Color, 26" $200/color
(Side Clamp Replaces Back Clamp on your Printer)
+crating
Precision-Machined
Print Head
Adjust Off-Contact, Screen Angle
and Micro-Registration without
using any tools. No more scraped
knuckles. These micros are super
responsive. Compared to other
systems, our adjustments are
easier and more intuitive to use.
FREEDOM
The perfect "first" automatic for a
growing manual shop. The Javelin
is manufactured by Tuf Products in
Houston, Texas. While the other
automatic manufacturers only pay
attention to the multi-million dollar
shops, Tuf Products treats even the
smallest printer with respect. The
Javelin holds perfect registration and
can print up to 1000 shirts per hour.
Please call for more information.
53
We thought a lot about how to explain this new FREEDOM 6-Color/8-Station
automatic printer from Tuf Products. Everyone wants to know how we can sell
a machine that looks almost exactly like the Javelin (see page 52) for $4,500
less. Well, there's a "PRICE WAR" going on and you are the big winner.
Tuf Products is battling it out to earn your first automatic printer purchase.
We hope you'll buy a bigger more expensive printer from us later on down
the road. We'll never get the second sale if we don't get the first one.
The Revolutionary FLASHBACK
Now for the first time, printing, flashing and
cooling are all performed on the same print
head. After the print stroke, the Flashback
automatically slides its thin quartz element in
between the garment and the screen, instantly
flash drying and then cooling the garment.
Choose between three flash modes: Print one
stroke then flash once; print two strokes then
All print heads are individually
flash once; or for a super-bright white undercontrolled with the simple flick base, print then flash and print then flash again.
of a switch providing a full array After each flash the garment is automatically
of printer interactive features.
cooled with the built-in turbo fans.
Now that brings us to the Freedom. It has nearly all the features of the Javelin.
The main differences are: No foot pedal for manual indexing (but it's an option),
Slightly lighter weight steel tubing (It's still built like a tank) and a slower indexer
(Most shops only average 400 pcs/hr on an auto anyway). Other than that, it's
pretty much the same machine for $4,500 less. And best of all the FREEDOM
uses the FLASHBACK (see page 52) and you get a 2 year warranty to boot.
$21,800
Fits Thru a
34 Inch Door
6, 8 and 10 Color Machines Available
Automatic Printers
Automatic Printers
52
PRINT UP TO
480 PCS/HR
PRINT UP TO
1000 PCS/HR
JAVELIN "PRO" SERIES 6-Color/8-Station ..........$26,575
FLASHBACK Automated Flash Cure Unit W/CRATING..3 ,600
2 YEAR
7 ½ hp Air Compressor w/ Air Dehumidifier Chiller.... 3,900
FACTORY
Crating, Installation and On Site Training.................. 1,850 WARRANTY
F.O.B. Phoenix, AZ
TOTAL...$35,925
So what's keeping you from buying your first automatic
printer? Is it money? We have easy leasing programs.
Not sure if you have enough work to keep it running?
Now you can quote competitively on jobs you could
only dream of getting. How about going home on time
for a change, because this auto will get your jobs done
way faster than printing by hand. The FREEDOM never
calls out sick, doesn't ask for a raise, never talks back,
is tax deductible to buy and saves on payroll!!
FREEDOM 6-Color/8-Station Automatic Printer.....$21,800
FLASHBACK Automated Flash Cure Unit W/CRATING..3 ,600
2 YEAR
7 ½ hp Air Compressor w/ Air Dehumidifier Chiller.... 3,900
FACTORY
Crating, Installation and On Site Training.................. 1,650
6-Color Freedom will fit through a 34” doorway.
TOTAL...$30,950 WARRANTY
F.O.B. Phoenix, AZ
ODYSSEY
SCREEN PRINTING
E Q U I P M E N T
#10213
6-Color/6-Station
Odyssey Printer
4c/4s $2,695
6c/4s $3,300
6c/6s $3,750
+$125 CRATING
The Odyssey printers combine superior
construction with features usually only BEST PRICES
found on higher priced models. Micro- We will beat your best price on any piece
of equipment we sell. Simply show us
Registration, adjustable off-contact and a written quote, current advertisement or
top grade aluminum castings are all
catalog from another supplier and we'll
make you a better deal!
standard with Odyssey.
ODYSSEYDESTROYSTHEMYTHTHATQUALITYCOSTMORE 55
Factory
Financing
Available
Startup?
No Credit?
Bad Credit?
Call for an
application
and see if
we can help
you get the
equipment
you need.
115 Volt
MERCURY
20" x 6 Feet
CONVEYOR
DRYER #2300C
#10220
Odyssey
Print Head
#11208
MERCURY 2300C CONVEYOR
$2,050
+$75 Crating, +$150 for #3000C 230 Volt Unit
#10211
4-Color/1-Station
Odyssey Printer
BENCH MODELS
4c/1s $1,650
1c/1s
$550
The Mercury table top conveyor
dryer offers the space savings
and power requirements for a
small shop. Economically priced,
yet providing faster production
than just a spot dryer. One year
warranty.
#11002
#10210
1-Color/1-Station
Odyssey Printer
Mercury Flash Cure Unit
18" x 18" 115Volt
$600
ODYSSEY
SCREEN PRINTING
E Q U I P M E N T
+$50 CRATING
Lease
Financing
Available
SEE PAGE 28 FOR MORE BOARDS
#12070 4"x24" Tapered Board w/Bracket $70
#12010 10"x14" Board w/Bracket $75
#12025 12”x14” Board w/Bracket $75
#12040 32"x40" Trapezoid All Over Board w/Bracket $120
#12200 Bracket Only $55
Odyssey Equipment
Odyssey Equipment
54
TABLE TOP SHOP $6,150 +Crating
56 CAPMAX CONVEX
CAP PRINTING SYSTEMS
Best
Seller
1-Color/1-Station Curved
Cap Attachment will slide
onto most T-Shirt printer
arms. Includes squeegee
and 110 mesh screen.
Add-on colors available.
PRINT HATS WITH STANDARD T-SHIRT SCREENS
SYSTEMS
$475
#12613 Add-on Color $250
#12614 Add-on Station $250
#12615 SubFrame Only $160
CapMax uses a curved platen and screen
system which follows the natural shape of
the cap for distortion free printing.
Each CapMax come complete with Platen(s),
squeegee(s), Screen(s) & Art Screen Guide,
plus all these standard features:
Curved Screen and Platen System
Micro Registration (on most models)
Screen and Squeegee Included
Spring Loaded Cap Hold-Down
Compatible With Popular Systems
Powder Coated Finish
6 Platen Sizes Available
Option Cap Flashes and Conveyors
#10204
1-COLOR TABLETOP
$600
+$50 Crating
4-COLOR
1-STATION
TABLETOP
$1,750
+$50 Crating
4 Platen Sizes are Available
Standard 6” wide x 3 3/8” Tall
Low Profile 6” x 2 7/8” Tall
Low, Low Profile 6” x 2 5/8 “
Slotted Visor 6” x 1 1/2” Tall for 2” Visor
ITEM # HAT CHAMP MODEL MBP PRICE
1HC
Hat Champ
2LPP
Low Profile Platen
includes Standard 6” x 3.375” Platen
6” x 2.875”
$377.78
$66.67
Low Profile Platen
3LLPP Low
6” x 2.625”
$66.67
4VP
Visor Platen
6” x 1.5”
$66.67
LSSB
Specialty Bracket
+$33.02
HCFR Extra Foam Pad-Regular
$11.25
HCFG Extra Foam Pad-Slotted
$12.50
AVAILABLE
PLATENS
CAP PRINTING
SOLUTIONS AS
LOW AS $378
FOB Northglenn, CO. These machines require Specialty Bracket: American
Rototex, Applied Engineering, Aztex, Catco, Harco, Lawson, M&R,
Netwok, Precision,Ranar, Silver Press, Spec & Vastex.
#10201
#10202
ODYSSEY CAP ATTACHMENT
Here's a basic cap attachment for those
of us on a tight budget. Attachment slides
on most printer arms. The print area is
3" x 4.75" and the platen is self leveling.
Use these wood cap screens with the thin
metal bar, so you can print close to the bill.
Includes 110 mesh screen and squeegee.
4-COLOR/4 STATION FLOOR MODEL
$125
$3,750 +Crating
Platen #1
Platen #2
Platen #3
Platen #4
Platen #5
Platen #6
No Special Screens
No Special Squeegees
No Adhesive Needed
No Distortion
Multi-Color is Easy
Poplin or Foam Hats
6 Panel Caps OK
Free Instructional Video
Easy to Use
Quick Operation
IVINGSTON
Best
Seller
Flat Cap Printers
Curved Cap Printers
#12610
HAT CHAMP 57
$45 Each
2.75" x 4.375" Low Crown, Youth
3"x 5.5" Twill, Poplin, Nylon, Taslon
3.25" x 5.5" Summer Mesh
3.5" x 5.5" Summer Mesh w/ Large Print
2" x 4.375" Visor
3.75" x 4.375" Low Crown w/6-Panel Groove
Curved Metal
Cap Screens
Wood
Cap Screens
Outside Dimension 7 7/8"x 4 1/4"
Inside Dimension 6" x 3 5/8"
Mesh Counts in For CAPMAX style printers
Stock: 80,110,
124,155, 200
and 300
$14.95
O.D. Size
#12011
$120
83 110 156 195
8.5" x 12" $13.95 $13.95 $13.95 $13.95
58
LITTLE BUDDY CONVEYOR DRYER
Free Crating
Free Casters
NEW
&
IMPROVED
120 or
240 Volt
Available
SPECIALS
$559
16 x 16" HEATER BF1-1600S
and FLOOR STAND
120 Volts 13.2 Amps Standard Plug
$659
and FLOOR STAND
120 Volts 18.5 Amps Dedicated Outlet
$784
and HD FLOOR STAND
64” Long x 28” Wide
18” Wide Teflon Belt
2 1/2 Foot Heat Tunnel
190 Lbs Ships via Truck
Approx 72 Shirts/Hour
$899
and HD FLOOR STAND
$1,325
and HD FLOOR STAND
Optional:
Upgrade to 240 Volt +$100 (100 shirts/hr)
Heat Control $232 for 120V, $243 for 240V
Cap Element (4”X18” external) CH-1200EX $273
3 YEAR
HEATER
WARRANTY
2408 BIG BUDDY
Replacement Dryer
Panels Available in
Many Sizes
IMPROVED
STAND DESIGN
AUTOMATIC
FLASH KIT
Afford-A-Flash
#LC1600
Shipped on One Skid
No Crating Charge
#BB08-6100
In Stock!
3 YEAR
HEATER
WARRANTY
Options:
Heat Control $224 to 331
Locking Casters $32
Flash Shields $38-44
3 YEAR
HEATER
WARRANTY
NEW
8 Feet” x 24” Belt
4 Foot Oven Chamber
Analog Temp. Control
Adjustable Belt Speed
“Hassle Free” Belt Tracking
Plastisol Cures 200 pcs/hr
Ships via Truck 480 lbs
240 Volts, 25.5 Amps, NEMA L6-30 Plug
On/Off Switch
Included
Flash Cure Units
Black Body Dryers
$2,095
59
$3,242
+FREE Crating
$425
Easily Converts Manual Flash
Cure Unit To Automatic
0-60 Second Dwell Timer
Foot Pedal Operated
No More BURNED Garments
Much Faster Production!!!!!!
$835
1575 Watts,120 Volts,13.3 Amps
#LC2200
$525
2223 Watts,120 Volts, 18.5 Amps
1 YEAR
WARRANTY
60EXPOSURE
The shuttered 1K Metal Halide single point light source
provides exceptional halftone exposures. An electronic
light integrator compensates for bulb aging and voltage
fluctuations so you get a perfect exposure every time. A
powerful vacuum hold down and durable rubber blanket
eliminates detail loss from light undercutting. Exposure
time is about 30 seconds using our SEX Emulsion on
110 Mesh. 25" x 36" Max Screen Size.
LUMITRON
$4,250
OUR MOST POPULAR
EXPOSURE UNIT.
U.V.-TUNED BLACKLIGHTS EXPOSE A
SCREEN IN ABOUT
3 MINUTES*.
#11598
*SEX emulsion on a 110 mesh screen
23"X31" Max
Screen Size
Bottom drawer
slides open for
exposure bulb
replacement
and cleaning.
115 VAC
61
$1,850
115 VAC
+$125 Crating
+$175 Crating
POINT 1000
EXPOSURE CALCULATOR
DON'T KEEP GUESSING!!
See 5 different exposure times
on a single screen. How many
screen remakes can you avoid
by buying and using this exposure
time calculator??
Model #SD-2632
SCREEN DRYING CABINET
#11596
If you are looking for better halftone
and fine line exposures, this unit is
a great choice. The 1000 watt quartz
and 2 U.V.-TUNED blacklights burn a
perfect screen every time. A set
of white flourescent inspection lights
allow this unit to double as a light table
for creating artwork or inspecting film
positives before burning a screen.
25" x 36" Max Screen Size.
$2,950
• Filtered hot air convection system.
• Holds 8 - 26”x32” screen frames
• Sealed door to keep light and dust out
• 36”x36” laminated top work surface
• 100 CFM airflow for 3 air exchanges/minute
• Automatic thermostat
• Galvaneal interior resists rusting
• 800 watts / 2,700 BTU
• 7 amps / 120 volts
$1,495
NEW
MODEL
Exposure Units
Exposure Units
#11600
UNITS
PHOTOSHARP
+$175 Crating
115 VAC
SEX
EMULSION
Our SEX Emulsion is the perfect match for your new exposure unit.
ITEM #
DESCRIPTION
MBP PRICE
EC
EXPOSURE CALCULATOR
$29.95
SEX presensitized photopolymer emulsion requires no mixing and
has a 1 year shelf life. No pinholing and super fast exposure time.
TRIAL OFFER: ITEM #
DESCRIPTION
Quart Gallon
50% OFF YOUR SEX PURE PHOTOPOLYMER EMULSION $27.95 $74.95
FIRST QUART Discounts: 5% buy 4 gallons 10% buy 8 gallons 13% buy 16 gallons
62
WASHOUT SINKS
CLEAN SCREENS FASTER & BETTER
Model #SINKSS48BL
44" wide x 28" Deep X 72" Tall
Professional quality stainless steel washout sink
has a plexiglass back. Install 4 foot flourescent
lights (customer supplied) with our optional yellow
safelight shields and dramatically improve screen
making quality. This sink will last a lifetime!
$1,595 PLEXIGLASS
BACK
+$95 crating
Designed to fit a pressure washer
and RFU20 filtration unit underneath
REDUCE YOUR CHEMICAL USAGE:
Add a Pressure Washer and
RFU20 Filtration Unit under
the sink and you have the
perfect screen reclaiming
system.
High pressure is the secret to making better screens.
You'll use less reclaimers and haze removers when
you let the pressure do the work. Reclaims screens
in less than one minute. The labor savings will pay
for this piece of equipment in under six months.
1000 PSI
Model #PW1000
$1,195
Trigger Gun, 24" Wand, Variable Nozzle, 15’ Hose
Free Crating
All Metal Construction
Oil Lubed Pump
1500 PSI
Model #PW1500
$1,395
Free Crating
2000 PSI
Model #PW2000
$1,595
Free Crating
3000 PSI
Model #PW3000
1500 PSI Continuous Duty
Pressure Washer
$2,995
WATER FILTRATION
#RFU20
$1,585
32"Wide x 24"Deep x 64" Tall
+$75crating
*Welded Main Sink Pan
*Built-in Screen Supports
*1/4" Natural Polypropylene
*Put Your Flourescent Lights
On Wall Behind Sink
*Bolt On Legs Included
*Ships by UPS
RFU20
Dimensions: 32"Dx16"Wx18"H
HEAVY DUTY CAST IRON
SUMP PUMP DISCHARGES
WASTE WATER UP TO 100
FEET TO YOUR DRAIN.
The dirty water falls from the sink drain into the RFU20
and goes through a stainless steel mesh strainer and
a 20 micron filter media. Plastisol ink and emulsion
are filtered and the water is then pumped to drain.
The RFU20 prevents drain clogs and keeps ink from
going down the drain. (Solvents are not acceptable
for drain discharge and are not removed by the RFU20).
(approx $58 to ship anywhere in US)
$450
Adjustable Hi/Lo Spray
Pressure With Our Special
Screen Reclaiming Nozzle
Free Crating
THE #KDL
*Drop ships Direct From Mfg (Chico, CA)
California customers add $32.63 CA Sales Tax
#KDL
PW1500
Pressure Washers
Wash Out Sinks
Stainless Steel Sink
PRESSURE WASHERS 63
Model #KDL
+ $55 Crating
*Slides under your exsisting sink.
*Up To 25-30 Screens Between Filter Replacement
*20 Micron Filter Bags Cost $3.97 ($3.74 in 144pc qty)
*Stainless Steel Filter Unit Construction
*115 Volt, 15 Amp Standard Plug
Fits under your sink.
Combine with a pressure
washer and eliminate
screen cleaning solvents
in your shop today!
SCREEN RACK
Easy Screen Storage
Screens Dry Faster
Heavy Duty Wheels
Adjustable To Fit
14” to 25” Screens
IVINGSTON
SYSTEMS
JACKET HOLD DOWNS
Don't Ruin Another Jacket!
Screens
not included
with Rack
RACK SPECS
25 Shelves
62” Rack Height
24” Deep Shelves
JACKET CHAMP
Q. WHY USE RACKS AND CARTS?
A. Your screens will last longer because
they'll be protected in a rack instead of
leaning up against a wall waiting to be
abused. Production is faster when you
wheel screens from sink, to screen room,
to production and back. Carts are great
because you can put inks and squeegees
on top and the screens underneath. All
the stuff you need to print a particular job
can be wheeled over to the printing press.
Item#
SRADJ
UBOAT
Description
Mfg. List MBP Price
SCREEN RACK- ADJUSTABLE
U-BOAT SHIRT BOX CART
$485.00
$325.00
$375.00
$299.00
Add manufacturer's $15 packing charge on all racks.
Racks can ship via UPS however UPS charges a $45 Oversized OS3 surcharge at 90 lbs per rack.
Screen racks are in stock for immediate shipment. F.O.B. New Jersey.
U-BOAT ALERT!
WARNING: This U-Boat will make your life much
easier (and save your aching back too!).
Sports Champ is ideal for
screen printing on mesh
shorts, umbrellas, and other
odd shaped or multiple
layered substrates. The new
replaceable aluminum platen
is more durable and reduces
flashing time. It will fit onto any
printing press. It holds
securely without adhesives.
The print area of the Sports
Champ is 4" X 4" or 7.5" X
7.5".
7.5” SPORTS CHAMP
NEW
ITEM #
4SC
8SC
14JC
16JC
LSSB
Load with boxes of T-Shirts, 4 highx3 wide. That's
nearly 1000 T-Shirts on one U-Boat. Now you can
easily wheel those shirts from the UPS truck, right
on over to the printing press. After printing, load
the boxes back onto the U-Boat and they're ready
to wheel out to your customer's vehicle when the
order is picked up.
If your shop is tight on space, you really need to
get some U-Boats. They are easily maneuvered
in tight spaces and can be parked in the aisles.
U-Boats in stock for immediate shipment via truck. F.O.B. New Jersey
U-BOAT
16" wide x 60" long deck
1500 lb capacity
NEW! Steel Diamond Deck
SALE
$299
Jacket Champ comes in two
different sizes 14" and 16" for
printing on the backs of jackets.
Jacket Champ will fit onto any
printing press. The clam shell
locking system holds the jacket
in place for multi-color printing
with no adhesives required. It
stretches, clamps and locks in
one quick motion. The spring
loaded lifter holds the clamp up
while loading the jacket. It
adjusts to accommodate light to
heavy weight jackets.
7.5"x7.5"
Jacket Hold Downs
Screen Racks
64
HOLD DOWN SIZE MBP PRICE
$428.57
7.5" Sports Champ for
$448.89
Mesh Shorts & Umbrellas
14" Jacket Champ $457.78*
16" Jacket Champ $490.00*
4" Sports Champ for
SwimCaps and Suits
Specialty Bracket
+$33.02
FOB Northglenn, CO. These machines require Specialty Bracket: American
4” SPORTS CHAMP
Rototex, Applied Engineering, Aztex, Catco, Harco, Lawson, M&R,
Netwok, Precision,Ranar, Silver Press, Spec & Vastex.
All hold downs drop ship from mfg. allow 24-72 hours for shipping.
*14JC AND 16JC ship at 30 lbs UPS OS2.
BEST HOLD DOWNS ANYWHERE!

Catalog - Performance Screen Supply

Transcription

Similar documents

BUSHIDO

your tax return and save a tree.

Brighter Colors - Large Format Printers

ColorPainter H2-104s/H2-74s

Tom Yezza - Geometric Graphics

HM-6106 - Gravograph

DP-J450 - Duplo USA

INDUSTRIAL INKJET PRINTER

Fredrix 777VWR Vivid

Knocking-up - PCL Labels