bacou tornade s3 hi hro

PRODUCT NUMBER: 6532018
BACOU TORNADE S3 HI HRO
Visa fler
Översikt
Reference Number
6532018
Product Type
Skyddsskor
Range
Beal
Line
Essentials
Brand
Sperian
Brand formerly known as
BACOU
Industry
Building and Construction
Utilities
Product Use
Safety Shoes for Professional Use.
Sida 1 av 4
BACOU TORNADE S3 HI HRO - 6532018
Features & Benefits
Feature
200 J Spacium™ non metallic toe cap Non magnetic Extra wide Chemically neutral
Benefit
Ultra light and comfortable Inalterable and excellent thermal insulator
Feature
Ergonomic and antistatic insole Anti-bacteria treatment
Benefit
Provides optimal comfort and hygiene
Feature
Flexium™ anti-puncture midsole Non-metallic, made with high tenacity textile fibres Covers 100% of
the plantar surface
Benefit
The midsole is light and flexible No constraints for the wearer when flexing the foot Antistatic and
comfortable
Feature
Nitril rubber flat outsole
Benefit
Protects from heat by contact up to 300%, without leaving footprint marks on the surfaces
Technical Description
Sizes
39-47
Table Size
Table Size
Midsole
Flexium ™ Anti-puncture Midsole in high tenacity textile.
Upper
Pigmented leather upper. Water tight leather bellows. Absorbent and quick drying Poromax® lining.
Toe Cap
200 J SPACIUM ™ Toe cap : Ultra light (50% lighter than a steel toe cap) Non metallic Thermal
insulation Inalterable
Insole
Ergonomic and antistatic insole. Anti-bacteria treatment.
Outsole
Antistatic rubber stitched outsole Heat resitant < 300° Oil and petrol resistant * oil ASTM N°3
swelling < 5% * isooctane-toluene (70-30) swelling < 13% High resistance to current chemical
agents Adherence coefficient: SRA, according to EN ISO 20345: 2004/Am.1: 2007
Sida 2 av 4
BACOU TORNADE S3 HI HRO - 6532018
Certifications
E.C. Declaration of Conformity
EC Category PPE
0
Quality Assurance
ISO 9001 / 2000
EC Attestation
EC Attestation
EC Attestation Number
0075/016/161/06/07/0204
Foton & bilder
Det finns inga bilder för närvarande.
Maintenance
Life Cycle
If the footwear is supplied with a part of, or the whole sole unit made of polyurethane:
We advise that the footwear should be used in the limit of 3 years following the manufacturing
date, which figures on the footwear. After this time limit, certain factors such as : exposure to
sunlight, hydrometry, temperature changes, could cause a modification in the structure of the
material, which would no longer maintain the same performance levels with regards to the
requirements defined in the European Directive 89.686 CEE.
If the footwear is supplied with a sole unit made from a material other than polyurethane:
We advise that the footwear should be used in the limit of 5 years following the manufacturing
date, which figures on the footwear.
Storage Information
Footwear should be stored in their original packaging, kept in a controlled stock area, not subject to
rapid changes in temperature or humidity levels.
Care Instructions
After use leave your footwear to dry in an aired place away from heat.
Remove any excess dust or dirt with a brush.
Remove any marks using a damp cloth and soap if necessary.
Finally polish any grain or pigmented leathers using a commercially available shoe care product.
Välj region/land
© 2011 Honeywell International Inc.
Sida 3 av 4
BACOU TORNADE S3 HI HRO - 6532018
Sida 4 av 4
E.C. Declaration of Conformity
The manufacturer or its legal representative supplier in the European Community:
Sperian Protection Europe
Declares that the Personal Protective Equipment described here after conforms to the
provisions of the European Council Directive 89/686/CEE:
Designation: BACOU TORNADE S3 HI HRO
Reference: 6532018
Standard(s): EN ISO 20345:2004
This PPE is the object of the below EC examination certificate n°:
Levererad av:
CENTRE TECHNIQUE DU CUIR
4 rue Hermann Frenkel
69367
Lyon Cedex 07
Upprättat i Lyon, on the 11/11/2011
Av: Ailsa LHOPITAL
Avdelning: Body Protection
Zl Paris Nord II 33, rue des Vanesses BP 50288 95958 Roissy CDG France
Tel: +33 (0) 49 90 79 79 Fax: +33 (0)1 49 90 79 80
www.sperian.com