Decoiler

Transcription

Decoiler
Decoiler
Flexibility
Designed to work automatically with a Kentex Multi-Blank® machine or as a
freestanding decoiler for use with existing equipment. We can provide:
1. Decoiler
2. Coil car
Capacity
Various standard capacity units are available:
6,000 # x 36” width
12,500 # x 49” width
20,000 # x 49” width
Typical mandrel expansion range is 18"-21". Different weight capacities and mandrel
expansion ranges are available.
Ease of Use
All machinery power (mandrel rotational and mandrel expansion) is powered
hydraulically. Powered mandrel expansion means safer, faster coil loading and
unloading.
Automatic Operation
Decoiler rotation is automatically loop arm controlled. The loop arm controls variable
speed operation, providing smooth stops and starts. Variable speed reduces decoiler
drive system shock, extending components life. Loop arm control can be disabled for
safety during coil handling.
Safety
The decoiler rotary drive system and mandrel expansion power is fully guarded. The
pendant control allows disabling automatic rotation during coil loading.
Decoiler
Controls
A pendant & cable, similar to an overhead crane, houses controls. The pendant
contains on, Estop, Expand/Contract and Forward/Reverse switches.
Operating Speed
Operating speed automatically adjusts to the 150 FPM maximum.
Electrical Requirements
Three phase electrical supply is required. Equipment can operate from 220-575 volts in
50 or 60 hz.
Construction
Construction includes steel plate and heavy structural sections. Plate seams are seal
welded. Structural bracing is included where required. Mandrel expansion & contraction
is by a link system including bronze bearings.
Decoiler Finish
After fabrication completion, the decoiler framework is machine cleaned and powder
coated prior to electro-mechanical assembly.
Coil Car Option
A coil car with weight capacity matched to the specified decoiler can be included. The
coil car includes a ‘v’ shaped surface to center coils during movement. The coil car
includes sufficient vertical travel to touch the mandrel lower surface when fully extended.
The powered coil car moves along steel tracks mounted within the decoiler base.
Hydraulic check valve prevents vertical coil drop in the event of hydraulic pressure loss.
Installation
The decoiler and coil car can be installed by placing on a typical industrial concrete
foundation and drilling holes for concrete expansion bolts. No special foundation is
required.
USA 903-877-4336
USA FAX 903-877-4509
Kentex • 16427 CR 384 • Tyler, Texas 75708
www.gokentex.comhttp://www.gokentex.com