Measuring - Thomas Skinner!

Transcription

measuring
Measuring Tools & Precision Measuring Instruments
1-2-3 & 2-4-6 Blocks...................................................................... 18
Calipers........................................................................ 6-7, 17-18, 21
Combination Square Sets............................................................ 9, 23
Contact Points............................................................................. 2, 19
Coordinate Measuring Machines (CMMs)....................................... 16
Digital Readouts & DRO Kits......................................................14-15
Edge & Centre Finders.......................................................... 9, 17, 24
Gauges......................................................................... 7-8, 18, 21-23
Hardness Testers............................................................................ 12
Height Gauges................................................................................. 13
Indicators...........................................................................2-3, 17, 19
Levels.............................................................................................. 24
Linear Scales................................................................................... 14
Measuring Tapes............................................................................. 19
Micrometers.......................................................................4-6, 18, 20
Microscopes................................................................................... 12
Parallel Set...................................................................................... 18
Portable Surface Roughness Testers.............................................. 11
Profile Projectors............................................................................ 10
Protractors.............................................................................9, 23-24
Punches.......................................................................................... 25
Quill Kit........................................................................................... 14
Rules/Straight Edges................................................................... 9, 23
Scribers.......................................................................................... 24
Squares............................................................................................. 9
Stands/Bases............................................................... 3-5, 17-18, 20
Surface Plates & Stands................................................................. 10
Tap Wrenches................................................................................. 25
Thread Measuring Wire Sets........................................................... 18
V-Blocks & Clamps......................................................................... 23
Wireless Communication................................................................ 15
1
Measuring
Dial Indicators
Stainless steel stem
Back Plunger
Series 2
Series 1
Features:
• Inch
• ANSI standard
• Back plunger style
InchMetric
• Stem diameter 3/8"
• With mounting stem
• Dial only
GRADUATION
.001"
RANGE
.20"
READING
0-25-0
ORDER #
MTI-1167
PRICE
$132.58
Features:Features:
• ANSI standard
• ANSI standard
• Lug on centre back
• Limit hand is a standard acc.
• Yellow face
GRADUATION RANGE
READING
.0010"
.50"
0-100
.0010"
1.00"
0-100
.0010"
1.00"
100-0
.0010"
2.00"
0-100
.0001"*
.05"
0-10
.0001"
.05"
0-5-0
.01mm
10mm
0-100
Magnetic Back for Series 2 Dial Indicators
*Jewelled bearings
Stainless steel stem
Series 1
Features:
• Inch
• ANSI standard
• Lug on centre back
1411S
GRADUATION
.001"
.001"
RANGE
.25"
.25"
READING
0-100
0-50-0
ORDER #
MTI-1410S
MTI-1411S
PRICE
$103.22
$103.22
Optional accessories
CONTACT POINTS & EXTENSIONS
LENGTH
.750"
1.000"
Shell Type Point
4-48UNF
Ø .16 Ball Point 4-48UNF
Flat Point
4-48UNF
Spherical
Point
4-48UNF
60º Conical
Point 4-48UNF
Extension Rod 4-48UNF
2
DIA
.500"
.375"
ORDER #
MTI-101186
MTI-101187
PRICE
$7.52
$7.52
ORDER #
21BZB005
PRICE
$12.36
LENGTH
.375"
.375"
ORDER #
MTI-101188
MTI-101189
PRICE
$13.39
$13.39
DIA LENGTH RADIUS
.500" .12500"
.28"
.375" .09375"
.35"
ORDER #
101-205
MTI-101204
PRICE
$7.52
$7.52
LENGTH
.500"
LENGTH
1"
2"
4"
ORDER #
MTI-101190
ORDER #
MTI-301655
MTI-301657
MTI-301659
PRICE
$7.52
PRICE
$4.12
$8.24
$16.48
ORDER #
MTI-2414S
MTI-2416S
2904S
MTI-2424S19
MTI-2804S10
2805S-10
MTI-2046S
MTI-900928
2416S
2.19" dial
face dia
PRICE
$106.06
$106.06
$108.11
$214.97
$176.14
$176.14
$96.59
$41.20
Large dial face
Series 3
Features:
• Larger-diameter graduation face
• Jeweled bearing
• Coaxial revolution counter
• Shockproof
3426S19
• Comes with limit pins and an outer frame clamp
GRADUATION
RANGE
.0010"*
3.00"
.0010"**
3.00"
*w/lug **flat-back
READING
±0-100
±0-100
ORDER #
MTI-3426S19
3426SB19
PRICE
$288.84
$288.84
Pocket test indicators
Series 513
Features:
• Jewelled bearings
• Reversible measuring direction
• Fully adjustable bezel/dial face
• Contact point is adjustable within 220°
• Basic set includes .079" dia carbide contact point, 3/8"
dia stem, spanner
• Full set includes basic set plus .039" dia carbide contact
point, .118" dia carbide contact point, .157" dia stem, swivel
clamp, inch holding bar and .315" dia holding rod
GRADUATION
.0001"
.0001"
.0010"
.0010"
RANGE
.01"
.01"
.04"
.04"
ORDER ONLINE @ www.thomasskinner.com
READING
0-5-0
0-5-0
0-20-0
0-20-0
SET
ORDER #
Basic
513-504
Full MTI-513504T
Basic
513-518
Full MTI-513518T
513-518
PRICE
$183.72
$194.14
$132.58
$166.67
Measuring
Absolute digimatic
indicator id-u
“QUIK-SET” TEST INDICATORS
Slim & simple design
Features:
• Large LCD and simple key operation
• After initial origin setting, the ID-U no
longer needs absolute positioning over
the entire battery life; the origin
is remembered even after power-off
• Employing the ABSOLUTE linear
encoder, the ID-U always displays the
spindle “Absolute Position” from the
origin at power-on
• Flat back type only, no option for backs
• SPC data output
Stem dia 3/8", #4-48 UNF thread
Model #: ID-U1025E
Accuracy: .0008, Measuring Force: 1.8N or less
RESOLUTION
RANGE
ORDER #
PRICE
.0005"/0.01mm 1"/25.4mm MTI-575123 $219.70
Features:
• Jewelled bearings
• “O” ring incorporated in bezel design seals instrument from dust and oil
• Enlarged pitch of teeth on crown gear improves ability of indicator to
withstand shock
• Dovetails, integral with housing, gives broad flexibility for mounting of
instruments
• Basic set includes .079" dia carbide contact point, 3/8" dia stem and
knurled clamp ring
GRAD RANGE READING
SET
ORDER#
• Full set includes basic set
.0001"
.008"
0-4-0
Basic
MTI-513403
plus .039" dia carbide
.0001"
.008"
0-4-0
Full
513-403T
contact point, .118"
.0005"
.030"
0-15-0
Basic
MTI-513402
diameter carbide contact
.0005"
.030"
0-15-0
Full
MTI-513402T
point, .157" diameter
.0005"
.030"
0-15-0
Basic long point MTI-513412
stem, swivel clamp and
inch holding bar
.0005"
.030"
0-15-0
Full
MTI-513412T
PRICE
$140.16
$217.81
$112.69
$160.30
$189.40
$214.97
As compact as standard Series 2 dial indicators
Model 513-907
SERIES 543
Features:
• Lug back
• More robust than dial indicators
• Large digital readout
• Inch/metric
• Switchable count direction
• Output for data collection
• Zero setting function
ORDER #
MTI-513907
PRICE
$198.87
• Absolute origin setting
• Battery lasts up to 3 years
Optional accessories:
• 1M cable (9053318)
• 2M cable (905409)
RANGE
.5"/12.7mm
.5"/12.7mm
DISPLAY
.00050"/.010mm
.00005"/.001mm
Contact points & holders
ORDER #
MTI-543683
543-692B
PRICE
$180.81
$309.67
Replacement
Contact Points
Model 7046pck
Centring
Universal
Holders
ORDER #
MTI-7046PCK
REMARKS
Lug back
Flat back
543-683
TEST INDICATOR OPTIONAL ACCESSORIES
Mag stand/
indicator set
Contains:
• 7010SN
magnetic stand
with 6" rod and
universal clamp
• 2416S 1" dial
indicator (.001"
grad, .1 range/
rev, 0-100 dial)
• Plastic tool case
513-402
Digimatic INDICATORS
Precision tool kit
Contains:
• 513-402 dial
test indicator
(.03" range,
.0005"
graduation)
• 7014 mini
magnetic stand
• Custom tool
case
• One year
warranty
SERIES 513
PRICE
$195.08
TYPE
DIAMETER
ORDER #
For MTI-513402
.039"
MTI-133196
.078"
MTI-133195
.118"
MTI-133197
PRICE
$7.21
$12.36
$7.21
SIZE
ORDER #
Universal
DESCRIPTION
Allows the indicator to be
set at a desired position
.25" dia stem,
3" length
MTI-901459
$42.23
Centring
Allows large dia cylinders
or holes to be centred
.25" dia stem
MTI-901997
$134.72
PRICE
3
Measuring
Digimatic micrometers
Outside micrometers & sets
Mitutoyo’s Most
Popular
Micrometers
Series 103
Features:
RANGE
• Carbide faces 0 - 1"
• Positive
1 - 2"
locking
0 - 1"
clamp
1 - 2"
• Hammertone 2 - 3"
green baked
3 - 4"
enamel
4 - 5"
finished
5 - 6"
frame
6 - 7"
• Clear
7 - 8"
graduations
8 - 9"
on satin
0 - 1"
chrome
1 - 2"
finish
2 - 3"
(standard)
3 - 4"
• Complete
4 - 5"
with fitted
5 - 6"
case
6 - 7"
GRAD
.0001"
.0001"
.0010"
.0010"
.0010"
.0010"
.0010"
.0010"
.0010"
.0010"
.0010"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
.0001"
DESCRIPTION
Friction thimble
Friction thimble
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
Ratchet stop
ORDER #
MTI-103135
MTI-103136
MTI-103177
MTI-103178
MTI-103179
MTI-103180
MTI-103181
MTI-103182
MTI-103183
MTI-103184
103-185
MTI-103260
MTI-103262
MTI-103217
MTI-103218
MTI-103219
MTI-103220
MTI-103221
PRICE
$109.85
$121.22
$84.81
$97.86
$121.16
$139.21
$148.68
$160.04
$183.72
$198.87
$211.18
$108.91
$123.96
$144.89
$158.15
$172.35
$186.56
$207.39
sets
DESCRIPTION
3 micrometers, 2 standards
ORDER #
MTI-103929
MTI-103904001
MTI-103922
MTI-10390701
MTI-103909
MTI-10390840
PRICE
$303.04
$784.12
$375.01
$856.09
$1,363.52
$1,929.25
Flex-stand
4
GRAD
• 2M SPC cable (05CZA663)
DESCRIPTION
ORDER #
PRICE
0 - 1"/ .00005"/
0 - 25mm .001mm
Without SPC output, with MTI-293831
ratchet stop
$155.31
0 - 1"/ .00005"/
0 - 25mm .001mm
Without SPC output, with MTI-293340
ratchet stop
$203.61
1 - 2"/ .00005"/
25 - 50mm .001mm
With SPC output, ratchet
stop, standard
293-331
$306.83
1 - 2"/ .00005"/
25 - 50mm .001mm
Without SPC output, with
ratchet stop, standard
293-341
$257.23
Micrometer optional accessories
Spindle attachment tips
DESCRIPTION
Ball attachment
Ball attachment
SIZE
.20" dia
.25" dia
ORDER #
PRICE
101-468L
$10.30
MTI-101469L $14.42
Features:
• Enables the setting of dial
indicators and dial test indications
in any position
• Ball joint added at base allows
220o side to side movement and
rotates 360o
ORDER #
MTI-7033B
PRICE
$215.92
DESCRIPTION
ORDER #
PRICE
With 6" rod
& universal
clamp
MTI-7010SN
$88.07
With 6"
adjustable
rod & fine
adjustment
MTI-7011SN
$99.44
Models 7010sn & 7011sn
Model 7012-10
Features:
• Accepts all AGD 3/8" stems
• Dial indicators by the lug-on-centre back
• 360° pivot, multi-jointed arms
• One clamping knob locks all flexible joints
• 132 lbs pull
• Made with permanent magnets
• ON/OFF switch
RANGE
293-340
Model 7033b
103-904-001
GRAD
.0010"
.0010"
.0001"
.0001"
.0001"
.0001"
Features:
• IP-65 rated - coolant proof
• Extra large LCD readout
• Inch/metric
• Origin setting, zero setting
• 1M SPC cable (05CZA662)
Magnetic stands
All sets come with individual micrometers and
deluxe case.
RANGE
0 - 3"
0 - 6"
0 - 3"
0 - 6"
6 - 12"
0 - 12"
Series 293
Features:
• 513-402 dial test
indicator
(.03" range, .0005"
graduation)
• 7014 mini magnetic stand
• Custom tool case
• One year warranty
ORDER #
MTI-701210
PRICE
$178.04
Measuring
Micrometers
Standards
quantumike
series 167
Features:
• Used for the zero point setting of outside
micrometers
• Flat and lapped measuring faces
• Heat insulating
LENGTH DIAMETER ACCURACY
ORDER #
handle for
1"
.25"
±.000005"
167-141
preventing
2"
.25"
±.000100"
MTI-167142
expansion
3"
.25"
±.000100" MTI-167143
due to body
4"
.31"
±.000100"
167-144
temperature
5"
.31"
±.000150"
167-145
• Supplied in
6"
.31"
±.000150"
167-146
fitted carton
series 293 - Excellent repeatability results
PRICE
$21.78
$21.78
$27.46
$29.36
$30.30
$32.20
Inside sets - Interchangeable Type
series 141
Probably the most frequently used inside measuring instruments because
of their wide range and simplicity in measuring operation.
141-233
RANGE
1 - 2"
2 - 8"
2 - 12"
4 - 20"
SPACING
COLLAR
.25"
.50"
.50"
1.00", 2.00"
Features:
• Mitutoyo’s patented precision lead screws allow for rapid
measurement operation
• 2mm spindle feed per revolution (instead of conventional .5mm)
• Save up to 60% positioning time and 35% measuring time
• Ergonomically designed for one-handed operation
• Rated IP-65 for oil, water and
dust resistance
293-180
• 1M SPC cable w/output
switch (05CZA662)
• 2M SPC cable w/output
switch (05CZA663)
RANGE
0 - 1” / 25mm
1 - 2” / 25 - 50mm
0- 1” / 25mm
1 - 2” / 25 - 50mm
RESOLUTION
With SPC
.00005” /
.001mm
2 - 3” / 50 - 75mm
ORDER #
MTI-141102
MTI-141208
MTI-141233
MTI-141121
PRICE
$163.83
$177.09
$217.81
$356.07
DESCRIPTION
Without SPC
Without SPC
PRICE
$319.68
$348.57
$249.78
$294.51
293-187
$364.60
Wide range outside
104-138
series 104
6 Interchangeable Anvils
Features:
• Carbide-tipped spindle
• Ratchet stop for constant force
Stand - For Use With Outside
Micrometers up to 4"
series 156
GRADUATION RANGE DESCRIPTION
.001"
0 - 6"
5 standards
.001"
6 - 12"
6 standards
.001"
12 - 18" 6 standards
.001"
18 - 24" 6 standards
Designed to allow bench-top use of .5" thru 4"
hand micrometers or other gauges which have
frame area sufficient to grab onto.
ORDER #
156-101-10
ORDER #
MTI-293180
293-181
MTI-293185
MTI-293186
PRICE
$84.81
PRICE
$424.26
$648.70
$798.32
$1,182.71
Spherical Carbide-tipped measuring
faces
series 115
Call our Customer Service Team at
1-866-999-3117 for all your
Measuring needs.
ORDER #
MTI-104137
MTI-104138
MTI-104201
104-202
115-153
Features:
• Ideal for measuring the
wall thickness of small
parts
• Great for measuring dimensions from the inside of holes to outside
edges
GRADUATION RANGE
.0001"
0 - 1"
.0001"
0 - 1"
DESCRIPTION
Spherical anvil
Spherical anvil & spindle
ORDER #
MTI-115153
MTI-115253
PRICE
$125.95
$126.90
5
Measuring
Micrometers
Tubular inside sets - Extension type
Depth - Interchangeable
type
series 137
Features:
• Wide range of ID measurements by combining
extension rods and anvils with the
micrometer head
• .001" resolution
• Includes 137-002 head and extension rods
• Accurately finished
• Incorporated in a RANGE DIAMETER OF RODS
pipe for
2 - 12"
.5"
shop-floor use
2 - 40"
.5"
129-131
series 129
Features:
• Ratchet stop
for consistent
and repetitive
measurements
ORDER #
MTI-137212
MTI-137214
PRICE
$356.07
$572.94
RANGE RESOLUTION BASE LENGTH
0 - 4"
.001"
2.5"
0 - 4"
.001"
4.0"
0 - 6"
.001"
2.5"
0 - 6"
.001"
4.0"
0 - 12"
.001"
2.5"
0 - 12"
.001"
4.0"
ORDER #
MTI-129127
MTI-129131
MTI-129128
MTI-129132
129-149
MTI-129150
PRICE
$179.93
$199.82
$229.17
$243.38
$370.28
$383.54
Calipers
abs digimatic - Unlimited response speed
Coolant proof digimatic
Mitutoyo’s ABS (Absolute) Digimatic Caliper offers
special functions which allows it to always remember its
measuring position even after the gauge has been
switched off.
Features:
• Large LCD display
• Power saving design - powered by a single SR-44 battery
• Functions include: origin-setting, zero-setting, error alarm, low battery
Featuring Position
alarm, SPC data output, inch/mm conversion
Memory and a 3.5
• Can measure steps
Year Battery Life!
• Unlimited response speed
RANGE
REMARKS
ORDER #
PRICE
(no more overspeed errors)
0 - 6" / 150mm
Without SPC output
MTI-50019620
$178.98
• Thumb roller
0 - 8" / 200mm
Without SPC output
MTI-50019720
$239.59
• Optional 1M SPC
0 - 12" / 300mm Without SPC output
MTI-500193
$432.45
cable (959149) and
0 - 6" / 150mm
With SPC output
500-171-20
$204.55
2M SPC cable
0 - 8" / 200mm
With SPC output
MTI-50017220
$268.00
(959150)
0 - 12" / 300mm
With SPC output
500-173
$479.18
• Display .0005" / .01mm
Features:
• Can be used submerged
• IP-67 rated
• Inch/metric conversions
• Origin set-up
• .3" LCD provides quick reading
• .0005"/.01mm resolution
• +/-.001" accuracy
• Battery lasts up to 1.5 years
• Without SPC cables
Optional SPC cables available
series 500
0 - 24" / 600mm
With SPC output
Battery cover for 500-196 & 500-197
MTI-50050610
MTI-09GAA185
$975.41
$1.03
Vernier - Heavy duty
model 160-102
Features:
• Available with a fine adjustment carriage
to fine-feed the slider
• Long jaws for measuring hard-to-reach
portions
• The jaws have round measuring
faces for ID measurement
6
SCALE
RANGE LOWER UPPER
0 - 24"
.001"
.001"
JAW LENGTH
3.94"
ORDER #
160-102
PRICE
$768.02
Series 500
RANGE
0 - 6"
0 - 8"
0 - 12"
ORDER #
MTI-50075210
MTI-50075310
MTI-50075410
PRICE
$206.90
$299.25
$409.10
Digimatic carbon fiber
Series 552
552-312-10
Features:
• Standard jaw type
• Lightweight, highly durable and easy
to handle
• Direct readout of ID measurements
from the LCD
• With SPC data output
• Preset
RANGE*
ORDER #
PRICE
function
0 (.5") - 18" 552-312-10
$994.35
Optional
0 (.5") - 24" 552-313-10
$1,079.26
SPC
0 (1") - 40" 552-314-10
$1,703.70
cables
0 (1") - 60" 552-315-10
$2,158.51
available
0 (1") - 80"
552-316-10
$2,935.80
* ( ) Minimum dimension in ID measurement
Measuring
Calipers
Gauges
Precision vernier
series 530 & 531
Features:
• The finest of vernier calipers for accurate work, 530-312
with Mitutoyo’s exclusive “Quardi” 4-way measuring feature
• Can measure OD, ID, depth and steps
• Models available with a fine adjustment carriage to fine-feed the slider
GRADUATION
RANGE LOWER SCALE UPPER SCALE
0 - 6"
.001"
1/128"
0 - 8"
.001"
1/128"
Inch/
Metric
MODEL 154-901
Features:
• Extra long for gauging deep and shallow holes, slots, and similar work
• Used with an outside micrometer for measuring inside diameter of bores
RANGE
.118 - .511"
Vernier Calipers (Plain)
Inch
4 Piece Small Hole Set
0 - 6" / 0 - 150mm .02mm .001"
0 - 8" / 0 - 200mm .02mm .001"
0 - 12" / 0 - 300mm .02mm .001"
ORDER #
MTI-530105
MTI-530116
PRICE
$84.28
$115.53
MTI-530312
MTI-530118
MTI-530119
$92.81
$115.53
$250.96
TELESCOPING
GRADUATION
RANGE LOWER SCALE UPPER SCALE
0 - 8"
.05mm
1/128"
Inch/
Metric
0 - 8” / 0 - 200mm
.02mm
.001”
PRICE
$108.91
Features:
• Self-centring for quick checking of
inside measurements
SERIES 155
155-903
Vernier Calipers (With Thumb Clamp)
Inch
ORDER #
MTI-154901
DESCRIPTION
5/16 - 1/2"
1/2 - 3/4"
3/4 - 1-1/4"
1-1/4 - 2-1/8"
2-1/8 - 3-1/2"
3-1/2 - 6"
ORDER #
531-108
PRICE
$106.06
Set of Six
531-129
$110.91
DESCRIPTION
5/16 - 6"
ORDER #
MTI-155121
MTI-155122
MTI-155123
MTI-155124
MTI-155125
MTI-155126
ORDER #
MTI-155903
PRICE
$34.09
$34.09
$33.55
$36.35
$45.46
$48.30
PRICE
$219.70
DIAL BORE - For Inside Diameter
Measurement
Dial
series 505
Features:
• Smooth movement
• Can measure steps
505-675
• Extra rigid main beam
• Thumb roller
• Slider displacements are amplified by a rack and pinion mechanism and are located on the dial
• Sharp jaw edges provide easy access to portions that ordinary calipers cannot RANGE GRADUATION PER REV
ORDER #
measure
0 - 6"
.001"
.2"
505-717
• Supplied in
0 - 8"
.001"
.2"
MTI-505719
fitted carrying
0 - 12"
.001"
.1"
MTI-505677
case
0 - 12"
.001"
.2"
MTI-505720
With titanium coating along slider beam
0 - 6"
.001"
.1"
MTI-505675
0 - 8"
.001"
.1"
MTI-505676
*Extra Smooth Movement
RANGE GRADUATION PER REV
0 - 6"*
.001"
.1"
0 - 8"*
.001"
.1"
SERIES 511
Features:
• Most popular bore gauge
• Carbide tipped contact points
• Dial indicator fully protected by a rugged cover
• Optional extension rods can be attached for measuring
deep holes
PRICE
$127.68
$177.09
$327.66
$290.73
$140.16
$194.14
511-751
RANGE
.7 - 1.4"
DIAL
GRAD
2923SB-10 .0001"
.7 - 6"
2923SB-10 .0001"
1.4 - 2.5"
2 - 6"
ORDER #
505-689
MTI-505690
PRICE
$173.30
$217.81
# OF
ANVILS
9
# OF
SPACERS
ORDER #
2
MTI-511751
PRICE
$357.97
26 (2" sub
anvil)
10
MTI-511932
$948.89
9
2922SB
.0005"
4
MTI-511742
$320.09
2922SB
11 (2" sub
.0005"
anvil)
4
MTI-511743
$355.13
2 - 6"
2923SB-10 .0001"
11 (2" sub
anvil)
4
MTI-511753
$386.38
6.5 - 10"
2923SB-10 .0001"
6
7
511-755
$599.45
7
Measuring
Gauges
Dial depth
Screw Pitch
For rapid, direct reading measurements of
hole depth.
Features:
• 0 - 8" range
• 2904 dial
Indicator includes:
• 4" base
• 1", 2" and 4" rods
• Carrying case
Features:
• 4 - 42 TPI and 0.4 - 7mm
• 51 leaves
DESCRIPTION
• Inch/metric
o
model 7218
Series 188
Features:
• Can keep track of the origin
point once set for the entire
life of the battery
• Base and measuring faces
are hardened and
micro-lapped
ORDER #
4-42 TPI
MTI-188151
$67.24
Metric 60o (21 leaves)
.4-7mm
MTI-188122
$34.09
Features:
• Graduated in 14ths, 20ths, 24ths, & 32nds
• Hardened with lapped edges and notches
• Used for grinding and setting a thread cutting tool in a lathe
• Meets requirements of the American National
ORDER #
and US 60° standards
MTI-950201
PRICE
$16.10
Digimatic model
also available.
ORDER #
MTI-7218S
PRICE
$290.73
Absolute digimatic depth
- With spc data output
series 571
RANGE
Unified 60 (30 leaves)
Metric 60o (21 leaves)
Functions:
• Origin-set
• Zero-setting
• Automatic power on/off
• Data output
• Inch/mm conversion (inch/mm models)
• Alarm: low voltage
• Counting value composition error
Centre
model 950-201
Radius
Model 186-101
Features:
• Fractional radius gauges available up to 1"
• Decimal radius gauges available up to 1"
• Includes locking clamp
GRADUATION
RESOLUTION
.0005" /
.01mm
ACCURACY
.0010"
.0010"
.0015"
ORDER #
571-211-20
571-212-20
MTI-57121310
PRICE
$432.78
$471.61
$531.27
Mitutoyo Calibration
Laboratory
Planned and developed by Mitutoyo Canada
Inc., the calibration laboratory is a natural
extension of product services to our customers
across Canada. This state-of-the-art centre
provides a large scope of calibration services on
a comprehensive range of measuring equipment.
The temperature controlled (20oC +0.1oC) Class 10,000 Clean
Room, is staffed with highly trained calibration technicians. Mitutoyo‘s Lab
is equipped with a wide range of precision calibration and test equipment
utilizing the most modern technology.
The Mitutoyo Calibration Lab provides calibration services on virtually all
measuring equipment. Our internal capabilities, coupled with our
extensive network of authorized calibration service providers, allow us to
offer our customers simple one-time service or full service calibration.
8
ORDER #
MTI-186101
1/32 - 1/4", 30 leaves
571-211-20
RANGE
0 - 6"/150mm
0 - 8"/200mm
0 - 12"/300mm
PRICE
PRICE
$37.28
Radius set
model 186-901 - With protective case
Features:
• Holding case has indexed pockets to facilitate the
selection of the proper size gauge
• A 4" long holder is included to make it possible to
check radii in confined or hard-to-reach locations
# OF LEAVES
SIZE
ORDER #
PRICE
25
1/64 - 17/64", by 64ths &
9/32 - 1/2" by 32nds
MTI-186901
$130.69
Angle set
model 186-910
Features:
• Manufactured from stainless steel
• 18 individual gauges for easy use
• 8 gauging surfaces per gauge
• Eliminates time consuming measuring set-ups
• Includes protective case
ORDER #
186-910
PRICE
$155.31
Measuring
Rules
Mitutoyo’s Most Popular Series
COMBINATION SQUARES SETS
Series 182
with 12" Blade
Features:
• Satin chrome finish
• Stainless steel case
Series 180
Features:
• 12" blade
• Square head
• Centre head
• Protractor head
Full Flexible Rules (Thickness 1/64")
SIZE
6" (4R)
6" (16R)
6" (5R)
6" x 150mm
6" x 150mm
12" (4R)
12" (16R)
12" x 300mm
GRADUATIONS
1/8", 1/16", 1/32", 1/64"
1/32", 1/64", 1/50", 1/100"
1/32", 1/64", 1/10", 1/100"
1/32", 1/64", 1mm, 1/2mm
1/50", 1/100", 1mm, 1/2mm
1/8", 1/16", 1/32", 1/64"
1/32", 1/64", 1/50", 1/100"
1/32", 1/64", 1mm, 1/2mm
WIDTH
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
ORDER #
MTI-182201
MTI-182202
182-203
MTI-182205
182-208
MTI-182221
MTI-182222
MTI-182225
PRICE
$15.15
$15.15
$15.15
$15.15
$22.73
$29.36
$29.36
$29.36
ORDER #
MTI-182101
MTI-182105
MTI-182121
MTI-182122
MTI-182125
PRICE
$16.10
$16.10
$33.15
$33.15
$33.15
PRICE
Wide Rigid Rules (Thickness 3/64")
SIZE
6" (4R)
6" x 150mm
12" (4R)
12" (16R)
12" x 300mm
GRADUATIONS
1/8", 1/16", 1/32", 1/64"
1/8", 1/16", 1/32", 1/64"
1/8", 1/16", 1/32", 1/64"
1/32", 1/64", 1/50", 1/100"
1/8", 1/16", 1/32", 1/64"
WIDTH
3/4"
3/4"
1"
1"
1"
Semi-Flexible Rule (Thickness 1/64")
Engraved on front side only.
SIZE
GRADUATIONS
WIDTH
ORDER #
40" x 1000mm
1/2mm, 1mm, 1/32",
1/16", 1/64"
5/8"
182-309
$73.63
GRADUATION
1/8", 1/16", 1/32", 1/64"
1/32", 1/16", 1mm, 1/2mm
ORDER #
MTI-950300
PRICE
$10.42
PRICE
$50.19
$53.98
$111.75
Model 187-904
Features:
• Hardened stainless steel, rust and wear
resistant for long life
• Flush-reading, no parallax error, gives
a high degree of accurate
measurements
• With magnifier glass for easier
and faster reading
5 min.
REMARKS
ORDER #
With 6" blade (187-104) &
clamp box for inch height
gauge (950-749)
MTI-187904
ORDER #
MTI-050103
PRICE
$31.25
$323.87
Regular type
All edges are hardened and precision ground.
Bevelled-edged type squares are also available from
Mitutoyo. Contact us for more information.
Model 050103
PRICE
Steel squares
Series 916
Centre finder
Features:
• 3/8" shank dia
• .2" tip dia
• Hardened and ground on all surfaces
ORDER #
180-501U
180-503U
180-602U
With protective case
Thickness 1/64"
Backside has "/mm equivalents
GRADUATIONS WIDTH
1/64", 1mm
1/2"
PRICE
$211.18
$212.50
UNIVERSAL BEVEL PROTRACTOR
1o
Model 950-300
ORDER #
MTI-180905U
180-907U
Replacement blades
LENGTH
GRADUATION
12"
8, 16, 32, 64ths (4R)
12" x 300mm
32, 64ths, 1, 1/2mm
24"
32, 64, 50, 100ths (16R)
GRADUATION
DIAL VERNIER
Pocket steel rule
SIZE
6" x 150mm
180-905U
SIZE OUTSIDE DIMENSIONS SQUARENESS ORDER #
3"
3.00 x 2.00"
.00026"
916-401
4"
4.00 x 2.67"
.00028"
MTI-916402
6"
6.00 x 4.00"
.00032"
MTI-916403
916-401
PRICE
$143.00
$179.93
$228.23
9
Measuring
SURFACE PLATES & STAND
Profile projectors
MODEL PH-3515F
Features:
• Erect image on day-bright screen
• 14" (356mm) diameter protractor screen with crosshairs
• Digital angle measurement to 1’ or 0.01°
• Floating-type workstage incorporates linear scales for fast, accurate
measurement
• Contour illumination with halogen bulb
• Surface illumination with halogen bulb
• Surface illumination included
• Suitable for thread pitch measurements
— free from blurred or distorted images
when the workpiece is angled
• 10X magnification lens Included
Optional accessories for:
• KA counter (174-173A)
• Projection lenses (contour & surface)
• Rotary vise (172-144)
• V-block w/clamp (174-234)
and more!
PH-3515F - Stand not included
MODEL PH-a14
PACKAGE # ORDER #
PRICE
2
M172858-2 $13,375.00
Features:
• Inverted image on the day bright screen
• 8" x 4" X, Y, measuring range
• 14"(356) diameter protractor screen
with cross-hairs and staggered lines
• Heavy-duty workpiece table
incorporates linear scales
• Work stage can handle a workload
of up to 100 lbs
PH-A14
• Fiber illumination is standard
accessory
• 10X magnification lens included
F.O.B. MISSISSAUGA, ON
10
Feature natural granite, seasoned for thousands of years. These surface
plates are free from burrs or protrusions because of the fine grain structure
and insignificant stickiness. This ensures a high degree of flatness over a
long service life and causes no damage to other parts or instruments.
All of Mitutoyo’s granite surface plates meet or exceed Federal Specification
GGG-P-463c. Each surface plate is shipped with a Certificate of Accuracy.
Steel Stand
For supporting Black
Granite Surface
Plates, at working
levels, are available either
stationary or with
casters. The total height of
stand and granite plate is
36". If ordering stand only,
stand height will be
made according to a
Grade A granite plate
thickness.
Other sizes are
available.
Contact our
Thomas
Skinner Customer
Service Team
for more
information.
Surface plates - A Inspection Grade
SIZE
WEIGHT
ORDER #
12 x 18"
100 lbs
517-803
18 x 24"
200 lbs
517-805
24 x 36"
600 lbs
MTI-517808
PRICE
$268.95
$539.79
$1,055.96
Steel stand
SIZE
24 x 36"
PRICE
$939.90
WEIGHT
73 lbs
ORDER #
MTI-517956
qm-data 200
Powerful data acquisition and processing tool that uses an
intuitive panel design with “Geometry Keys” that accelerate
the measuring and calculation process. A geometric
readout/analysis unit for optical instruments. Improves
operator productivity, minimizes errors and
saves total measurement time and production
ORDER #
cost, while providing powerful data analysis.
PACKAGE #1
• Projector
• KA counter, 2-axis linear scale
• Counter tray
PACKAGE #3
• Projector
• QM-Data 200 Processor
with arm mount
• Edge detection
Series 517
Profile projector accessories
Profile Projector
Packages:
PACKAGE #2
• Projector
• QM-Data 200 Processor
with arm mount
Granite Surface Plates
264-156A
PRICE
$3,665.21
Economy stands
Economical option for bench-top
optical profile projector units.
Available with or without casters.
Edge
detector
PKG #
1
2
3
ORDER #
PRICE
M1728101
$6,220.00
MTI-M1728102 $8,511.00
M1728103
$10,560.00
F.O.B. MISSISSAUGA, ON
050002-E-1
DESCRIPTION
With casters
Without casters
ORDER #
050002-E-1
050002-E
PRICE
$986.06
$781.51
Measuring
Portable surface roughness testers
Surftest SJ-210
Features:
• 2.4" color LCD display with backlighting is switchable to vertical or
horizontal left and right-hand views
• The built-in battery allows approximately
1,000 measurements
• Optional MircoSD card can store
up to 10,000 measurement results
• Functions such as calibrations,
measuring conditions, parameter
and display settings can be password
protected
• External output includes Digimatic SPC,
RS-232C and USB
Parameters
Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv,
R3z, Rsk, Rku, Rc, Rsm, Rz1max, S,
HSC, RzJIS, Rppi, R∆a, R∆q,
Rlr, Rmr, Rmr(c ), Rdc, Rk, Rpk, Rvk,
Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R,
Rx, AR, Possible Customize
Traversing range
Range
.70" (17.5mm) including pre/post travel
14200µ / 360µm
Measuring speed (drive)
Measuring speed (at return)
Power supply
Drive/detector unit dimensions
(W x D x H)
Mass
ORDER #
PRICE
0.01, 0.02, 0.03 in/s (0.25mm/s,
0.5mm/s, 0.75mm/s)
1mm/s
Two-way power supply battery
(rechargable) & AC adapter
6.85 x 2.59 x 2" (115 x 23 x 26mm)
approx 1.1 lbs (500 g)
MTI-17856102A
$2,582.50
ACCESSORIES
Small hole DETECTORS & deep groove DETECTORS
Surftest SJ-310
Features:
• Large 5.7" color LCD with touch screen improves operability and achieves
high visibility
• Statistic measurements up to 3 parameters of 300 samples can be
performed showing average, standard deviation, max, min, pass rate and
histogram
• Up to ten measurement conditions along with stored data can be
displayed and printed out by the built-in thermal printer. It can also store
up to 10 measurement conditions with the built-in memory
• The total measurement and sectional measurement results can be
displayed as well as the evaluation curve, BAC/ADC curve
• USB, Digimatic SPC output, RS-232C and External Software connectivity
is supported
• Security is managed via a password
lock to restrict function
changes and unnecessary
settings that could cause
operation errors.
• 16 languages can be
selected and are switchable
• It corresponds to cissoidal
calculation in which one
measurement can
evaluate two different
conditions
Parameters
Ra, Ry, Rz, Rt, Rp, Rq, Rv, Sm, S, Pc,
R3z, mr (c), Rpk, Rvk, dc Rk, Mr1, Mr2,
Lo, Rppi, R, AR, Rx, A1, A2, Vo, HSC,
mr, SK, Ku, R∆a, R∆q, Wte, Wx, W, AW,
Rmax, Rz1max, RzJIS, Rlr, Rpm, tp,
Htp, l a, l q (can be customized)
Traversing range
Range
.70" (17.5mm) including pre/post travel
14400µ / 360µm
Measuring speed (drive)
Measuring speed (at return)
0.01, 0.02, 0.03 in/s (0.25mm/s,
0.5mm/s, 0.75mm/s)
.039"/s (1mm/s)
Two-way power supply battery
(rechargable Ni-H battery) & AC adapter
6.85 x 2.59 x 2" Drive/detector unit dimensions (WxDxH)
(115 x 23 x 26mm)
Power supply
MEASURING
STYLUS
FORCE
PROFILES*
REMARK COLUMN
Small hole detectors
0.75mN
2µmR/600 Minimum measurable hole
diameter: ϕ4.5mm
4 mN
5µmR/900
Deep groove detectors
0.75mN
2µmR/600
Not available for the
4 mN
5µmR/900 transverse tracing drive unit
*Tip radius / Tip angles
Mass
ORDER #
PRICE
ORDER #
PRICE
178-383
178-392
$921.02
$797.24
178-385
178-394
$921.02
$797.24
approx 3.75 lbs (1.7 kg)
178-955-4A
$5,526.55
DRIVE UNITS
DESCRIPTION
Standard drive unit
S-drive unit
S-drive unit set
R-drive unit
ORDER #
178-230-2
178-233-2
178-234-2
178-235
PRICE
$847.59
$2,339.27
$2,944.05
$1,359.43
11
Measuring
Hardness testers
Portable - Impact type
rockwell type
A rebound type portable hardness tester for metal with a compact body and
high operability. It allows anyone to perform hardness testing easily at the
touch of a key, so it can be used widely on various components in the field.
Features:
• Auto angle compensation
• Offset
• OK/NG judgment
• Hardness scale conversion
• Data storage (1,800 data entries)
• Statistical analysis (average, max,
min, dispersion)
• Auto sleep function
• Impact counter display
Specifications:
Features:
• Multiple test force generation for Rockwell,
Rockwell Superficial and Brinell hardness
• Dolphin-nose indenter arm for easy reach of
interior (min. ø40mm/ø22mm*) and
exterior surfaces
• Real time electronic test force control for
accurate loading
• Indenter escape function for continuous testing at fixed table position
• Auto-stop elevation table and automatic preliminary test force loading to
provide
29.42N (3kgf) Preliminary test force
stable test
98.07N (10kgf)
force
Specimen depth
5.9"
generation
Dimension
9.84 x 26.38 x 23.82"
*When using
Touch screen operation w/back-lit
Display
an optional
LCD graphic display
diamond
Drive
Manual (w/Auto-brake machanism)
indenter
Max spec height
8.1"
(19BAA292)
model hh-411
Impact hammer with integrated detector
& carbide-ball tip (D type: conforming to ASTM A 956)
Impactor
Display unit
Thickness
Mass
Testable
Test points
workpiece
7-segment LCD
Minimum 5mm or more
5 kg or more in mass
5mm or more from the edge of the sample,
3mm or more to each of the tested points
Surface
roughness
Power supply
Ra 10µm or less
Alkaline AA battery 2pcs or optional AC
adapter (battery life: 70 hours)
Standard Accessories:
MFG #
HH-411
ORDER #
810-298
PRICE
$5,578.20
DESCRIPTION
Test block HLD800
Display
Detector
Cable
ORDER #
19BAA265
810-291
810-287
19BAA460
PRICE
$729.06
$3,283.91
$3,210.56
$587.44
Rockwell Type
Model hr-110mr
Features:
• Rockwell hardness tester
• Test force by oil damper loading mechanism
• Test force selection manual by weight
• Analog display unit
• Mechanical loading drive unit
Modle hr-210mr
Features:
• Rockwell hardness tester
• Automatic test force control
• Test force selection manual by
963-210-10
weight with automatic zero-set
• Analog display unit
DESCRIPTION
ORDER #
• Motorized loading
HR-110MR
MTI-96321010
• Motor drive-button start
HR-210MR
963-220-10A
model
12
PRICE
$5,454.24
$6,670.08
Model HR-521
Mass
Output
Load duration range
ORDER #
PRICE
132 lbs
RS-232C, SPC, Centronics
0/s min-120s/max s/increment
HR-521
$17,561.00
TOOLMAKER’S MICROSCOPES
Complete selection of
interchangeable reticles
Models TM-505 & TM-510
Features:
• Angle measurement is performed easily by
turning the angle scale disc to align the
cross-hair reticle with the workpiece
• Compact body makes it ideal for use on
shop floors with limited space
• Complete selection of
interchangeable reticles
• Both transmitted and reflected
illumination intensity can be adjusted
to obtain optimal illumination intensity for the workpiece
• Can output XY coordinate data with optional
digimatic micrometer heads
MODEL XY STAGE TRAVEL RANGE ORDER #
TM-505
2 x 2" (50 x 50mm)
176-811A
TM-510
4 x 2" (100 x 50mm)
176-812A
Mic head 0 to 2"/50mm DIG IP-65
164-162
176-811A
Not exactly
as shown.
Mic heads
sold
separately.
PRICE
$4,359.26
$5,861.24
$984.88
Measuring
Height gauges
Linear HEighT Performance 2D
Measurement System
Digimatic height gauges
Standard Type - With SPC
LH-600E
SERIES 192
Features:
• Excellent accuracy of (1.1+0.6L/600)μm with 0.1μm/0.5μm
resolution/repeatability
• Perpendicularity (frontal) of 5μm and straightness
of 4μm are guaranteed
• Pneumatic full/semi-floating system allows
adjustment of air-cushion height
• Basic statistical functions are provided and,
additionally, RS-232C / USB data output provides
the option of evaluating measurement data
externally with SPC software on a PC
• One-key operation for running a
semi-automatic measurement
• Data entry from a digimatic tool
Standard accessories:
• ø5 eccentric probe (12AAF634)
• Probe diameter calibration block (12AAA715)
• Battery (12AAA712)
• AC adapter (357651), Power cable (02ZAA010)
• Clear cover (223587)
• Conveying handle (510434)
Measuring range (stroke)
Resolution (selectable)
Measuring force
LCD
Power grip
ORDER #
PRICE
Features:
• Easy-to-use standard type
• Carbide tipped scriber is provided
• Double-column structure ensures high measuring accuracy
• Coarse/fine feed switching
• 2 preset reference height
• Resolution .0005" / .01mm
RANGE
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
192-630-10
ORDER #
192-630-10
192-631-10
192-632-10
Multi-Function Type - With SPC
SERIES 192
0 - 38" (24") / 0 - 972mm (600mm)
.000001"/.00001"/.0001"/.001"
0.0001mm/0.001mm/0.01mm/0.1mm
1N
TFT LCD (colour)
Included
518-352A-21
$8,922.79
qm HEIGHT - Easy to use design
Features:
• Highly versatile multi-function type
• Carbide tipped scriber
• Rigid construction
• Coarse/fine feed switching
• Resolution .0005"
• 2 preset reference height
RANGE
0 - 12" / 0 - 300mm
0 - 18" / 0 - 450mm
0 - 24" / 0 - 600mm
192-670-10
OPTIONAL TWO-DIRECTION
TOUCH PROBE
ORDER #
192-670-10
192-671-10
192-672-10
PRICE
$1,637.52
$1,802.49
$2,380.33
ORDER #
192-008
PRICE
$685.63
hds - Provides Excellent Functionality
& Cost Performance
series 518
Features:
• Absolute linear encoder for fast, easy position detection,
simply set the origin once
• All measurements can be saved and recalled
• SPC and RS-232C output
• Many optional accessories are available to increase
measuring flexibility
• Includes calibration block (12AAA715)
series 570
Features:
• Absolute encoder for direct measurement from
power ON
• Functions include: zero-setting (ABS and INC modes),
presetting (ABS and INC modes), hold/data button,
inch/metric conversion, data output, error alarm, low
battery alarm, ON/OFF origin
• Batter life approx 20,000 hours of continual use
• With SPC
518-223
RANGE
0 - 14" / 0 - 350mm
0 - 24" / 0 - 600mm
ORDER #
518-225
518-227
PRICE
$1,256.34
$1,637.52
$2,189.27
570-312
PRICE
$3,798.34
$4,755.93
RANGE
0 - 12"/300mm
0 - 18"/450mm
ORDER #
570-312
570-313
PRICE
$678.05
$927.11
13
Measuring
Linear scales
AT715 - Absolute & high environment
resistance type
dro kits
High Performance & affordable
prices
Series 539
AT715 series
The AT715 Series linear scales feature Mitutoyo’s patented ABSOLUTE
encoder system. Set the origin once and the system always knows its
position along the scale. No overspeed errors and no repeated zerosetting is necessary. With the added benefit of being Coolant Proof, the
AT715 scales are the perfect solution to your measuring requirements.
Comes with a 5 year warranty.
Every DRO kit includes:
• KA counter (2-axis)
• KA counter tray/arm kit
• AT715 ABSOLUTE scales (2)
• Bracket kit
• Extension cable (if scale is over 36"/900mm)
Features:
• Employs ABSOLUTE
electromagnetic induction system
to achieve IP-67 environmental
resistance
• Detects and outputs an absolute position - no reference point
setup needed at every power-on.
• It is the most suitable scale to mount on the X-axis of a small lathe
• 2 mounting directions of the scale main unit allows easy to mount
on a machining tool with the difficult mounting position
EFFECTIVE
RANGE
12"
14"
16"
18"
20"
24"
32"
36"
40"
44"
48"
60"
64"
68"
72"
80"
88"
96"
100"
104"
112"
120"
MAX
TRAVEL
LENGTH
12.99"
14.96"
16.93"
18.89"
21.26"
25.20"
33.07"
37.00"
40.94"
44.88"
48.82"
60.63"
64.57"
68.50"
72.44"
80.31"
88.18"
96.06"
100.00"
103.93"
111.81"
119.68"
MOUNT
SIGNAL
HOLE OVERALL CABLE
PITCH LENGTH LENGTH ORDER #
18.43"
19.21"
11.4 ft MTI-539805
20.39"
19.76"
11.4 ft MTI-539806
22.36"
23.15"
11.4 ft MTI-539807
24.33"
23.70"
11.4 ft MTI-539808
26.69"
27.48"
11.4 ft
539-809
30.63"
31.42"
11.4 ft MTI-539811
28.50"
39.29"
11.4 ft MTI-539815
42.44"
43.23"
11.4 ft MTI-539816
46.37"
45.47"
16.4 ft MTI-539817
50.31"
51.10"
16.4 ft MTI-539818
54.25"
55.04"
16.4 ft
539-819
66.06"
66.85"
16.4 ft
539-822
70.00"
70.88"
16.4 ft MTI-539823
73.94"
74.72"
16.4 ft
539-824
77.87"
78.66"
16.4 ft
539-825
85.74"
85.11"
16.4 ft
539-860
93.62"
92.99"
16.4 ft
539-861
101.49" 100.86"
16.4 ft
539-862
105.43" 104.80"
16.4 ft
539-863
109.37" 108.74"
16.4 ft
539-864
117.24" 116.61"
16.4 ft
539-865
125.11" 124.48"
16.4 ft
539-866
Quill kit
TRAVEL
Lathes
12 x 52"
12 x 60"
16 x 80"
16 x 120"
ORDER #
PRICE
D950-985
D950-986
D950-987
D950-988
$2,237.74
$2,307.80
$2,629.65
$2,736.83
TRAVEL
Mills
12 x 30"
12 x 36"
16 x 36"
ORDER #
PRICE
D950-989
D950-991
D950-992
$1,552.95
$1,578.33
$1,578.33
Go to www.thomasskinner.com
for our most current prices.
14
Fits most vertical knee mills
Features:
• Resolution: .0005"/0.01mm
• Push button controls for inch/mm, zero-set and on/off
• Powered by one SR-44 battery which lasts 1 year with
normal use
• SPC output for data transmission to data processors
or a remote display
• Includes brackets and scale for Bridgeport type
machines
ORDER #
MTI-053906B
PRICE
$312.51
PRICE
$389.76
$391.79
$395.85
$400.93
$404.99
$416.15
$436.45
$464.87
$482.13
$502.43
$550.13
$652.65
$688.17
$732.83
$768.36
$968.31
$1,044.44
$1,239.32
$1,416.94
$1,459.57
$1,558.03
$1,624.00
Measuring
INPUT TOOL
USB SIGNAL CONVERTER
Digital readouts
EASILY INPUT DATA
ka counters
Features:
• System can be configured to best meet
your application, such as turning, milling
and grinding
• High performance 2- or 3-axis counter with 10-coordinate functions
• Absolute origin system
• Can be used as a “standard counter” or “lathe counter” through the
modification
of parameters
• Both the AT100 series optical scales and the AT715 series
electromagnetic induction scales can be connected
MAIN FUNCTIONS:
• Zero setting
• Preset
• Low digit OFF
• 10-coordinate
• Origin setting
• Linear error correction
• Switchable resolution
• Error displays
• 1/2 calibration
• Counting direction switch
• Bolt-hole circle machining
• Pitch machining
• Zero approach machining
• 2-scale date (only with 3-axis counter)
• Inch/metric conversion
• Touch signal probe
• A/I coordinate system selection DESCRIPTION
2-axis counter
• Diameter display
3-axis counter
Features:
• Enables you to easily input
measurement data from Mitutoyo
measuring instrument with the
digimatic output feature to your PC
• An USB keyboard signal conversion
input tool, IT-012U converts
measurement data to keyboard
signals and directly inouts
them to cells in off-the-shelf
spreadsheet software such as Excel
• 264-012-10: USB keyboard signal
conversion model
Computer not included
ORDER #
MTI-26401210
PRICE
$217.81
WIRELESS COMMUNICATION
u-wAVE sYSTEM
2-axis
Easy wireless data communication from a
measuring tool to a pc
3-axis
ORDER #
MTI-174173A
MTI-174175A
PRICE
$607.99
$754.15
The U-WAVE system enables easy wireless communication from a
measuring tool to a PC using the Digimatic protocol. Measurement
efficiency is improved by eliminating the long and cumbersome
data cables. The user friendly interface allows data to be loaded into
any software product that accepts keyboard input, such as Excel or
Notepad.
How to order u-wave:
1.One U-Wave-R (receiver) is required per system (supports up to
100 U-Wave-T units)
2.One U-Wave-T (transmitter) is required for each
digimatic Mitutoyo tool
3.Select appropriate cable for each tool
(this connects the
measuring tool to
the U-Wave-T)
02AZD880D
02AZD810D
Thousands more products are
available on our website at
www.thomasskinner.com
TYPE
Receiver
Transmitter
Transmitter
Cable
Cable
Cable
Cable
Cable
Cable
Cable
DESCRIPTION
U-Wave-R
U-Wave-T (IP67 type)
U-Wave-T (buzzer type)
Water-proof (caliper)
Water-proof (micrometer)
Digimatic caliper
10 pin plain
6 pin round
Plain type straight
Water-proof (indicator)
ORDER #
02AZD810D
02AZD730D
02AZD880D
02AZD790A
02AZD790B
02AZD790C
02AZD790D
02AZD790E
02AZD790F
02AZD790G
PRICE
$549.26
$265.16
$265.16
$132.58
$132.58
$132.58
$132.58
$132.58
$132.58
$132.58
15
Measuring
coordinate Measuring machines (cmms)
crysta-apex s series
500 series
Features lightweight materials and an innovative machine structure, providing high motion stability, high
accuracy, and affordability. The temperature compensation function (16oC to 26oC) can yield accurate
measurements even on the shop floor. Compatible vision and scanning probe technologies are employed to
provide flexible and effective measurement capabilities.
Features:
• High accuracy in the 1.7 µm class
• Temperature compensation system that guarantees the accuracy of
measurement under temperature conditions of 16° to 26°C
• High-speed, high-acceleration drive: offers a maximum drive speed of 519 mm/s and a maximum
acceleration of 2,309mm/s, resulting in an increase of almost 100mm in drive distance in one
second, when compared with general-purpose CNC coordinate measuring machines
• Designed for high rigidity: Y-axis guide rail, which is integrated into one side of the granite
surface plate, shows very little deterioration with use, and thus promises to maintain high
accuracy for a long time
• Air bearings located on the bottom face, in addition to those at the front, rear, and upper
surfaces of the slider unit of the X-axis minimize vibration
Also available Crysta-Apex S 700 Series &
900 Series - call for complete product
details and pricing.
X-axis
Measuring
Y-axis
range
Z-axis
Resolution
Guide method
Drive speed
700 Series
Max measuring speed
Maximum height
Workpiece
Maximum mass
Mass (including the control device
and installation platform)
CRYSTA-Apex S544
19.9" (505mm)
15.9" (405mm)
15.9" (405mm)
0.0001mm (0.1 µm)
Air bearings on each axis
8-300 mm/s (CNC mode), max. speed: 519 mm/s
0-80 mm/s (J/S Mode: High Speed)
0-3mm/s (J/S Mode: Low Speed)
0.05 mm/s (J/S Mode: Fine Speed)
8mm/s
21" (545mm)
396 lbs (180 kg)
1133 lbs (515 kg)
900 Series
SPINARM-APEX
Portable coordinate measuring machines
The high performance obtained with the SpinArm-Apex series makes it suitable for many manufacturing processes.
The ultra-compact body provides excellent portability. Combined with the software created with Mitutoyo-unique
technologies, SpinArm-Apex achieves superior operability.
Features:
• Ability to approach from any direction to the work piece
• Excellent portability, able to perform measurement close to the work piece
• Effortless handling is significantly improved, with the rotation axis automatic braking mechanism
• With counterbalance, high operational ability is achieved
• Non-contact line laser probe and contact probe can be mounted together
• Available in 6-axis (366S) and 7-axis (367S) models
Measuring envelope*1
Standard accessories:
Repeatability*2*3
• Tool box - used to store various accessories
Accuracy (arm type)*2*3
Standard probe: hard probe (SØ5mm), hard probe (SØ10mm), hard probe (point)
Mass (main unit)
• Fixture (magnet) - main unit securing plate, magnetic stand (3 units)
SpinArm-Apex 366S
3600mm
± 0.100mm
± 0.135mm
15.6 kg
SpinArm-Apex 367S
3600mm
± 0.110mm
± 0.165mm
16.0 kg
*1 Measurement range is expressed as a diameter value at the maximum reach using software with the SØ10mm standard probe mounted. *2 According to Mitutoyo’s acceptance procedure. The accuracy guaranteed value above is
determined when MS5-5R11G probe is mounted. *3 Guaranteed accuracy temperature range: 16o C - 24oC (Temperature gradient: 1.5K per hour).
16
Measuring
Indicators
Dial
Model 921
Features:
• Reverse counter
• Stainless steel components
• Rotating bezel with clamp
• Lugback (1/4" hole)
• Interchangeable point
• Conforms to AGD 2 standards
•
•
•
•
•
Dial
1" travel range
0-100 dial reading
.001" graduations
Stem dia 3/8"
Dial dia 2-11/64"
ORDER #
SOW-215010
Series 200
PRICE
$50.77
Dial
Model 200-010
Features:
• Reverse counter
• Stainless steel components
• Rotating bezel with clamp
• Lugback (1/4" hole)
• Interchangeable point
• Conforms to AGD 2 standards
•
•
•
•
1" travel range
0-100 dial reading
.001" graduations
White dial colour
Series 200
PRICE
$21.79
Centring
Model 286-620
Made in China
Features:
• With thumb lock
• Made of fully hardened stainless steel throughout
• Has a depth scale which can be read directly on verniers
• Jaws designed for outside, inside and thread measurement
• Micro-fine black graduation on a satin chrome finish for easy reading
• All measuring surfaces are ground and lapped for extreme
accuracy
SIZE
ORDER #
PRICE
• 1/1000" x 1/20mm
0 - 6" (0 - 150mm) SOW-200210
$32.35
graduation
0 - 8" (0 - 200mm) SOW-200215
$42.08
Digital vernier
Series 200
ORDER #
286-620
PRICE
$259.03
Magnetic bases
standard
Features:
• Direct reading to .001 on large clear dial
• Measuring face hardened, precision ground and micro
lapped for absolute accuracy
• Adjusting slide for fine adjustment
• Inside, outside and depth measurements
• Satin chrome finish - crisp engraved graduation
• Covered rack
SIZE
ORDER #
PRICE
• Accurate to .001 per 6"
0
6"
SOW-200582
$30.07
• Made of stainless steel
0
8"
SOW-200584
$52.87
• Clamp for repetitive setting
0 - 12" SOW-200586
$70.60
• Includes deluxe case
Vernier
ORDER #
SOW-200010
Features:
• Operating speed not to exceed 800 RPM
• Shank dia. Ø3/8" / Ø10mm
• Internal range: 5/32"-12" / 4-300mm
• External range: up to 12" / 300mm
• Dial range 0-.15"
• Accuracy .0002"
• 6 pcs feeler set, center locating feeler, warranty card,
instruction manual packaged in a wooden case
Fine
Features:
• Inside, outside, step and
depth measurements
• Inch/metric conversion
• Auto ON/SHUT-OFF
• Zero button
• .0005"/.01mm graduation
• Comes in plastic fitted case
Made in Taiwan
ORDER #
SOW-225705
225-002
SIZE
ORDER #
0 - 6" SOW-200645
0 - 8" SOW-200646
PRICE
$36.47
$66.15
Edge & centre finders
Micro
MODEL
Standard
Fine
Calipers
PRICE
$18.67
$91.28
MADE
IN THE
USA
Model A
Model B
SIZE
3/8 x .200"
1/2 x .200"
3/8 x .200"
1/2 x .200"
MODEL
A
B
E
F
DESCRIPTION
Edge finder
Edge finder
Edge/centre finder
Edge/centre finder
Model E
ORDER #
FIS-40210
FIS-40220
FIS-40250
40260
PRICE
$13.37
$14.02
$17.21
$14.02
17
Measuring
Gauges
Feeler
Model 200-870
• 48 wires - 16 different sizes
• Measures all threads from 3 to 48 threads
per inch
• Laminated
chart
included
in case
• Furnished
in vinyl
ORDER #
PRICE
case
Dial holder
Model 606-050
Features:
• 26 tapered leaf
thickness gauges
• 3" long
• .0015" - .025" range
Thread measuring
wire sets
Single action
ORDER #
SOW-606050
PRICE
$94.75
Accessory kit
ORDER #
SOW-200875
Select-a-point kit
The most useful accessory kit for all dial
indicators - a complete set of 22 different points,
increasing the
versatility of your
indicators.
Features:
• Fits all AGD 1,
2, 3, 4 drop
style indicators,
4-48 threads
ORDER #
PRICE
SOW-200820
$7.73
Steel parallel set
Model
230-863
Features:
• 10 pairs
• Thin style,
1/8" thick
• Matched pairs
• Made of high grade steel alloy
• Hardened and ground
• Tolerance ± .0003"
ORDER #
• Includes fitted case
SOW-230863
Articulated arm style magnetic
base positions and locks
easily; includes ON/OFF switch
and central locking knob. One
knob mechanically tightens
both arms. Dial gauge holder
includes fine adjustment and
full 360º swivel
SOW-200870
PRICE
$43.97
pee-dee
1-2-3 or 2-4-6 blocks
The best and most acceptable method of
measuring external threads is the three wire
method. This handy kit contains 48 wires,
enough to measure all 60° threads from 3 to
48 threads per inch. Wires are fitted in a
non-corrosive plastic case. Pockets have
the size hot stamped above each pocket. Laminated chart compiled from U.S. Standard
Handbook H 28 gives proper size and
measurement over wires.
Series 230
Features:
• Heat treated and case hardened to HRC55-60
• Precision ground and case hardened
• Squareness of all sides is
within .0001"
• Parallel accuracy .0003"
• Surface finish
6 - 16 micro
inches
• 23 holes - 5 are
tapped in 3/8-16
• Supplied
SIZE
ORDER #
PRICE
in pairs
1-2-3
2-4-6
SOW-230870
230-872
PRICE
$72.55
MADE IN
THE USA
$26.40
$213.92
Details on the
inside back
cover of this
catalogue.
Heavy duty extra long vernier caliper
$16.08
ORDER #
FIS-40100
PRICE
$33.77
Micrometer sets
Series 200
Features:
• Ratchet and lock nut
• Complete with
standards
(2" and up)
• Carbide faces
• Fitted wooden case
Model 200-592
Features:
• Adjustable vernier plates
• Longer jaws permit
greater accessibility
18
200-580
• Accuracy meets USA Federal specifications
• Made of fully hardened stainless steel
throughout, ground and lapped for accuracy
RANGE
0 - 24" x 600mm
GRADUATION
1/1000" x 1/50mm
JAW DEPTH
4"
ORDER #
SOW-200592
PRICE
$181.63
SIZE
0 - 6"
0 - 12"
ORDER #
SOW-200580
SOW-200098
PRICE
$189.86
$593.72
Measuring
CONTACT POINT SET
Dial indicators
MODEL 25R
Includes: 14 points with #4-48 screw thread
to fit AGD indicators, a regular 1/4" (6.3 mm)
long point, 9 special form points, a 28 shock
absorbing anvil, and 3 extra long points
1/2", 3/4" and 1" (13, 19, 25 mm) long. The
set features high grade steel, hardened and
ground. All points are mounted on a convenient
aluminum ring for safe keeping and easy
selection.
ORDER #
STA-50153
Test indicator
Universal Back Plunger Type
One of the most versatile indicators available, these universal dial test
indicators adjust to any angle. Indicator comes with three hardened
contact points. Graduation .001", range .2", dial reading 0-100.
DIMENSIONS:
• Tool post holder – 3/8" x 3/4" x 6"; with upright spindle
5/16" dia x 4-1/2"
• Dial indicator stem –
5/16" dia x 1-1/2"
• Clamp – 5/16"
diameter post,
1-5/16" capacity
MFG #
DESCRIPTION
196B1
flat or round
PRICE
$122.67
ORDER #
PRICE
196A1Z
Indicator with continuous dial,
complete with attachments in case
STA-50697
$241.11
196B1
Indicator only with continuous dial, 3
contact points, plus adaptor
STA-50699
$138.54
Indicator & magnetic back
MEASURING TAPES
Models 25-441j & 676-2
Tough tape
Dial Indicator
Fractional Read Tough Tape
Made with impact resistant ABS plastic, rugged
case. The ergonomic over-molded soft grip fits
comfortably in hand and the smooth blade lock
makes this tape measure easy to use.
FEATURES:
• High visibility
• Impact resistant
• Rugged cases
• Ergonomic over-molded soft grip
• Smooth blade lock holds the blade
firmly in place
Features:
• AGD Group 2
• Hardened stainless steel bottom
stems can be held in fixtures without
• 2-1/4" diameter
cramping rack action
• 1" range
Magnetic back
• .1" range/rev
• Fits No. 25, 2600 AGD
• .001" graduation
DESCRIPTION ORDER #
PRICE
• Group 2 dial indicators
• 0-100 dial reading
Dial indicator STA-53295 $148.05
• Furnished with a lug-on-center back
Magnetic back STA-56648
$46.00
AGD INDICATOR
CONTACT POINTS
Extra length
Made from high grade steel, hardened and
ground. Many more sizes are available.The
mounting stem is 3/8" diameter, overall length
is 5-3/8".
MY1-25
MY1-25
1 x 25’
MY34-16
3/4 x 16’
Graduation
1/16"
1/32" for the 1st
foot, 1/16" after
ORDER #
PRICE
68934
$7.60
68933
$6.91
MFG #
PT06677F
PT06677K
LENGTH
2"
3"
Test indicator axial
support
Model pt26007
Regular Style with
Round Ends
MFG #
Blade (W x L)
196A1Z
ORDER # PRICE
STA-70829 $6.14
STA-70833 $8.53
This accessory mounts any indicator having an
ISO standard dovetail or a 3/16" diameter post.
It provides adjustability in two directions with
the three hinge joints. The mounting stem is 3/8"
diameter, overall length is 5-3/8".
ORDER #
STA-65101
PRICE
$95.51
19
Measuring
Inside micrometer sets
Solid-Rod
Tubular
Features:
• Very useful for measuring ID of cylinders and rings and measuring
parallel surfaces
• Satin chrome finish on heads
• Each rod marked with length
• Quick, easy adjustment for micrometer
screw
• Quick-reading figures – every thousandth
numbered
• Graduation .001"
• Furnished in attractive, protective case
124AZ
• Does not include 124H handle
• 1" travel range
• 0-100 dial reading MFG # RANGE
# OF RODS
ORDER #
PRICE
2 - 8"
6
50542
$252.75
• .001" graduations 124AZ
124BZ
2 - 12"
10
STA-50546 $307.74
• Stem dia 3/8"
124H Handle for micrometers
50556
$12.69
• Dial dia 2-11/16"
Features:
• Hardened and ground anvils on rods are adjustable for length – head
anvil is hardened and ground
• Quick-reading figures – every
thousandth numbered
• 1-1/2" - 12" range, .001"
graduation
• Includes 8 rods and handle
• Furnished in attractive,
protective case
with assembly instructions
Not exactly as shown
• 1" travel range
• 0-100 dial reading
• .001" graduations
• Stem dia 3/8"
ORDER #
PRICE
STA-53052
$371.18
• Dial dia 2-11/16"
MAGNETIC BASES
Micrometers
Series 124
Interchangeable Anvil Set
SERIES 657
224 Series
Indicator Attachment: 1/4" O.D. one end. 1/4-20NC male
threads opposite end. 3/8" O.D. shoulder between.
Threaded end fits lug back of all AGD indicators and
miniature indicators. Knurled cap holds indicators in
desired position.
Features:
• Snug: 3/8" and 1/4" diameter holes
• Sleeve: Two 1/4" diameter holes
• Upright base post: 3/8" diameter x 7-7/16" length overall
• 1/4-20NC threaded end screws into magnetic base
• Rod: 1/4" diameter x 6" long
Feature a wide range of measurement and flexibility.
Each micrometer is equipped with a series of easily
interchangeable anvils, thus providing
the full range in steps of 1" or 25mm
with a single micrometer.
Features:
• Graduation .001"
• Measuring range 2 - 6"
MFG #
• Includes standards: 2", 3", 4", and 5
ORDER #
224ARLZ STA-50772
MFG #
DESCRIPTION
ORDER #
PRICE
657AA
Magnetic base indicator holder with upright
base post, 2 snugs, rod & indicator
STA-52743
$186.12
657S
Magnetic base indicator holder only
STA-52759
$21.15
STA-68621
20
PRICE
$490.67
Depth gauge w/non-rotating blades
Series 449M
Includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be
turned with the fingers and positioned at any angle relative to the base.
In operation, the blade does not turn, but moves perpendicularly only,
permitting depth measurement of narrow shoulders without the blade
rolling off.
Features:
• Measures in .0001"
• Comes with the combination ratchet and
speeder for uniform pressure and quicker
adjustment
449AZ3R
MODEL 660
FEATURES:
• Compact and versatile with 3 adjustable pivots controlled
by a single knob for fast, easy positioning
• Will hold any indicator with a 3/8" stem or standard
dovetail mount
• Articulating arm with powerful central locking knob
provides full 360o horizontal positioning and over 180o
vertical positioning
• Fine adjustment, 70 lb pull
• 1.181" x 1.575" x 1.378" base
ORDER #
Model 823bz
PRICE
$120.55
MFG # RANGE BASE LENGTH RODS ORDER #
449AZ3R 0 - 3"
2-1/2"
3
52318
449AZ6R 0 - 6"
2-1/2"
6
52320
PRICE
$286.59
$348.97
Measuring
Gauges
Depth
Calipers
Model 450-12
Dial
Series 1202
The Starrett 1202 Series Dial Calipers provide quick, accurate measurements of OD, ID, and depth.
The dial caliper is the most versatile precision hand tool on the market and has been the first choice
of metal working professionals for decades.
Features:
• Sharp, clear dial graduations of .001" with .1" per revolution
• Sharp, black graduations on the satin finished bar, every .1"
• Lock screws for sliding jaw and dial bezel
• Adjustable bezel
• Thumb-operated fine adjustment roll
• Hardened stainless steel bar, measuring
surfaces, rack, gears and depth rod
MFG # RANGE ORDER #
PRICE
• Covered rack depth rod
1202-6
0 - 6" STA-66964 $103.63
• Supplied in case
1202-8
0 - 8" STA-66979 $147.00
• Globally sourced
1202-12 0 - 12" STA-66980 $213.61
THICKNESS “FEELER” STOCK
Model 52868
Electronic
Series 798
Features:
• Large, easy to read LCD, .310"
character height
• IP-68 level of protection against coolant,
water, dirt and dust
• Induction type linear encoder system
• .0005" (0.01mm) resolution
• Hardened stainless steel measuring
surfaces for long life
• Zero at any position
Ideal for the individual mechanic. It
is light, reliable and accurate for
measurements to .001" or 0.02mm
and will fit into most toolboxes. 0 12" range. Has sharp, easy-to-read
dial graduations of .001 - .100" or
0.02 - 2mm in one revolution. Has
sharp, black graduations on the
satin chrome finished bar, every
.100" or 1mm. Optional base
extensions can be used to increase
the base span to 7 or 12 inches.
Shown with optional
Made of hardened
base extensions
stainless steel. Has
positive split gear
ORDER #
PRICE
anti-backlash.
STA-56768
$522.40
• Inch/mm conversion • Without output
• Fine adjustment
• Comes in fitted plastic case
MFG #
798A-6/150
798A-8/200
798A-12/300
RANGE
0 - 6"/150mm
0 - 8"/200mm
0 - 12"/300mm
ORDER #
20798
20799
20800
PRICE
$204.10
$260.14
$387.04
“yankee” spring-type calipers & dividers
Series 73, 79 & 83
Made from a high-grade steel and well-finished. The legs are made of flat stock and are very durable.
The fulcrum stud is hardened and has a smooth bearing surface. The bow spring, although flexible, is
exceedingly strong to assure reliability. Quick-adjusting spring nut designed for making fast, accurate
settings.
MFG# SIZE DESCRIPTION
73B-8
8"
Inside caliper
73B-12 12" Inside caliper
79B-8
8" Outside caliper
79B-12 12" Outside caliper
83B-6
6"
Divider
83B-8
8"
Divider
ORDER #
STA-50339
STA-50343
50369
STA-50373
STA-50379
STA-50381
Widely used in automotive, aviation, diesel
and farm equipment manufacture and
service also in jig, fixture, gauge and
experimental work.
Features:
• In individual envelope
• With convenient 3/16" (5mm) hole
punched in the end for hanging
• Rounded ends – no ragged edges make
stock easier to work with
• Marked every 6" with thickness
• Made of the finest tempered steel
• Inch sizes are 12" long, 1/2" wide and
furnished in 33 different thicknesses
ranging from .0005 - .030"
THICKNESS SIZE OF LEAVES
.03"
12 x 0.500"
ORDER #
52868
PRICE
$2.22
PRICE
$80.37
$83.55
$82.48
$86.71
$68.74
$90.94
Details on the inside back
cover of this catalogue.
21
Measuring
GAUGES & GAUGE SETS
CENTRE
THICKNESS
MODEL c391
SERIES 66 & 172
Features:
• Leaves made of finest tempered steel, carefully finished to correct
thickness, individually tested and marked with thickness
• Locking device permits securely locking one or more leaves in position
• Leaves easily removed
# OF
or replaced
MFG #
RANGE
LEAVES
SIZE OF LEAVES
• Rugged, steel case
Straight leaves
protects leaves
66
.0015 - .025"
172E .0020 - .015"
Tapered leaves
66T
.0015 - .025"
Features:
• 60° American National
• 14ths, 20ths, 24ths and 32nds graduations
66T
ORDER #
PRICE
26
8
1/2" x 3-1/32"
1/2-12"
STA-50314
50654
$60.28
$68.74
26
1/2-1/4" x 3-1/32"
STA-50315
$67.68
TELESCOPING Set
Precision ground radius on each gauge provides 2-point contact for maximum accuracy. The
handles of these gauges are rigidly attached to the contact plungers and are automatically
MFG #
RANGE
ORDER #
PRICE
self-centring. Constant spring tension gives
579A
5/16 - 1/2"
52610
$32.26
uniform contact pressure and both plungers
579B
1/2
3/4"
STA-52611
$34.37
are easily locked
579C
3/4 - 1-1/4"
STA-52612
$35.42
at any desired
579D
1-1/4 - 2-1/8"
STA-52613
$36.49
setting.
S579HZ
TELESCOPING SET
DESCRIPTION
Set of 5, 229A, B,
C, D & E in case
22
Each gauge has leaves for measuring both
concave and convex radii. Made of nicely
finished, high quality steel.
Features:
• Range: 1/32" - 1/4"
• # of leaves: 30
Not exactly
• Increments: 64ths as shown
$46.00
$58.17
ORDER #
STA-50664
$255.91
PRICE
$74.02
Models 6 & 156m
These gauges consist of a substantial steel case with a number of folding leaves at both ends.
All gauges features a locking device at both ends of the case.
Leaves on all gauges have a special narrow design,
permitting checking internal thread in nuts, etc., as
well as external threads.
Used for determining the true size of holes,
slots and recesses up to 6". Each of these
gauges feature a handle, one rigid contact
arm and one
spring-tensioned
telescoping
contact arm.
RANGE
1/2 - 3/4"
3/4 - 1-1/4"
1-1/4 - 2-1/8"
2-1/8 - 3-1/2"
3-1/2 - 6"
52614
52615
Set of 6, 579A, B, C,
STA-52617
D, E & F in case
1/32" - 1/2" FILLET OR
RADIUS
Screw pitch
MODEL S229GZ - WITH ONE
TELESCOPING ARM
MFG #
229A
229B
229C
229D
229E
2-1/8 - 3-1/2"
3-1/2 - 6"
PRICE
$23.80
MODEL 178A
SERIES 579 - Self-Centering with Two Telescoping Arms
579E
579F
ORDER #
STA-51475
6
HANDLE
2-3/8"
2-3/8"
2-3/8"
2-3/8"
3-1/4"
# OF
MFG# TPI RANGE
LEAVES
DESCRIPTION
V, Unified, American National - 60o threads
6
4-42
30
With locking device & 11-1/2 & 27 pipe thread pitches
ORDER #
PRICE
STA-50035
$38.07
International Metric Standard - 60 threads
156M .25 - 2.5mm
28
STA-50589
$43.88
o
ORDER #
PRICE
STA-50929
$216.79
With locking device
Many more Starrett products are available.
Visit www.starrett.com or call our
Customer Service Team 1-866-999-3117.
Measuring
Combination
square set
Gauges
0-180 protractor depth
59 drill point
Features:
• Angular measurement is from 0 to 180° in
opposite directions allowing the direct reading
of angles and supplementary angles
• Depths are measured from
a 6" blade with graduations
32nds and 64ths
• Rectangular protractor head
provides four convenient
working edges
• No-glare satin chrome
ORDER #
PRICE
finish
Features:
• Designed specifically for use in
drill grinding
• Adjustable sliding head can be
locked by a thumb nut
• The head is bevelled to 59°
(the correct drill point angle), and
graduated in 32nds
• Hook rule has accurate,
machine-divided graduations in
8ths, 16ths,
ORDER #
quick-reading 32nds
STA-50150
and 64ths
o
Model c493b
STA-52534
$80.37
With Square Head, Centre
Head & Non-Reversible
Protractor Head & Blade
o
Model 22c
Model 9-12-4r
Features:
• 12" size
• Cast iron heads with black wrinkle finish
• With reversible lock bolts, scriber, spirit level
in both square head and protractor head,
direct reading double 180o protractor scale
and hardened steel, machine-divided blade
• Graduation No 4R - 8ths, 16ths,
quick-reading 32nds, 64ths
PRICE
$61.33
Taper
Model 270
A very useful tool especially for bearing work
Top view is front side with inch measurement. Bottom view shows tapered angle.
and for gauging slots. The gauge is made of
quality tool steel 7/16" (11mm) wide by 6-1/4" (160mm) long and is accurately
tapered throughout its entire length for quick and convenient measuring of
slot widths, etc. This tool can also be used as a precision shim. One side is
ORDER #
PRICE
graduated from .01" to .15" in thousandths of an inch and the reverse side
STA-51292
$115.27
from .3mm to 4mm in one-twenthieth of a mm (.05mm).
v-blocks & clamps
For round or square work
Models 278, 568c & 578
Come in a variety of styles to suit the numerous requirements of machinists. They are for
general shop use and layout work as well as for holding stock in place during light-duty
milling, frilling and grinding operations.
Model 278
• Precision ground to extreme accuracy
• Vees are central, parallel and square with the ends and sides
• Hardened and ground steel construction
• Numbered in series so the vees in each set are always in alignment
Model 568C
278
• Hardened steel, precision ground parallel and square
• V-grooves are ground central and parallel to the sides and
base - perfect alignment in matched pairs
• Clamps have screw holes at 45o and 90o to hold either square or round work
Model 578
• Largest capacity V-block which is ideal for toolroom, inspection and production work
• Hardened steel
• Precision ground flat, square
MFG # CAPACITY
DESCRIPTION
ORDER #
and parallel
278
1"
Set w/2 v-blocks & 2 clamps 51312
• Rugged, reversible, hardened
568C
2"
Set w/2 v-blocks & 2 clamps 52592
clamp can accommodate
578
4"
V-block & clamp (lg capacity) 64960
9/16 - 4" dia
578
PRICE
$283.41
$477.98
$761.39
ORDER #
STA-50042
PRICE
$214.68
Straight edges
Series 380 & 385
Features:
• Precision ground and nicely finished
to rigid Starrett standards
• Unexcelled for drawing or scribing straight
lines and checking surface for straightness
• Thickness and design permit shape retention
and accuracy while portable and easy-tohandle
• Not beveled or graduated (380)
• Beveled on one edge but not graduated (385)
• Marked with arrows at two suspension points
SIZE WIDTH THICKNESS ORDER #
PRICE
Series 380
36" 2-13/32"
7/32"
38036
$221.27
48" 2-13/32"
7/32"
51442
$307.74
72" 3-5/32"
9/32"
51444
$542.50
Series 385
12" 1-13/32"
11/64"
51455
$66.63
18" 1-13/32"
11/64"
STA-51456 $86.71
24" 1-13/32"
11/64"
STA-51457 $156.51
36" 2-13/32"
7/32"
STA-51458 $236.88
48" 2-13/32"
7/32"
51459
$342.63
72" 3-5/32"
9/32"
STA-51461 $650.36
23
Measuring
LEVELS
BENCH
Precision shop tools
Edge finders
WIGGLE OR CENTRE FINDER
Body and contacts are made of tool steel,
hardened, ground and lapped to close tolerances
for diameter and concentricity.
Includes case.
Adapts to countless applications and are
readily interchangeable. The attachments
are snapped in the chuck without removing
the collet nut and are clamped by a ball
swivel-joint which permits
adjustment to an angular
position or true concentricity. Series 827 - for fast,
accurate work location
Model S828HZ - with
attachments
Right to left: S828 Wiggler/Centre Finder
(PT09186 Pointed Shank attached), 828B
Ball Contact, 828C Disc Contact, and 828D
Offset Indicator Holder.
MFG#
827A
827B
SIZE ORDER #
3/8" STA-53062
1/2" STA-53063
PRICE
$25.38
$30.14
Steel protractor
Model c183
Useful and accurate tool for setting bevels,
transferring angles, squaring tasks, checking
cutter clearances, and many other applications.
Head is rectangular providing four working
edges. The back of the tool is flat for ease of use
and the blade can be locked firmly at any angle
by the lock nut. Double graduations from 0 to
180° in opposite directions permit reading an
angle directly and also supplementary angle.
Has a satin chrome finish.
Model c130
This is a very handy, compact bench level with
a sensitive and accurate single vial. Cast iron,
black wrinkle finish.
ORDER #
STA-50560
MACHINISTS’ IMPROVED
DESCRIPTION
ORDER #
Complete with case & 4
attachments 828A, B, C, D
STA-53064
PRICE
$58.17
Trammels, Divider Points
& Attachments
Series 59
SERIES 98
These levels have ground and graduated main
vials. All sizes have a cross test vial making
it possible to simultaneously level in both
directions. The 12" model also has a plumb
vial. Main level vials have graduations that are
approximately 80-90 seconds or .005" per foot.
There are five, six or seven lines on each side of
the bubble, depending on the base length.
The trammel heads have a clamping device
that firmly holds various attachments. Non-glare
black finish.
98-12
98-6
MFG # SIZE DESCRIPTION
Not exactly
as shown
ORDER #
STA-50672
PRICE
$37.54
PRICE
$81.43
BLADE WIDTH (INCH)
ORDER #
2 trammel heads,
2 small points*
50297
PRICE
$78.25
ORDER #
PRICE
STA-50441
$124.78
98-6
6"
With cross
test vial
98-8
8"
With cross
test vial
STA-50442
$154.39
98-12
With single
12" plumb vial and STA-50443
cross test vial
$216.79
Same as 98-12
STA-50444
with case
$293.98
98Z-12 12"
* 6"/150mm
POCKET SCRIBBERS
Series 70
Handle is made of steel tubing, knurled and nickel
70A
plated. Scriber point held firmly in handle by chuck and,
when not in use, can be reversed, telescoped
into handle and locked by a slight
MFG # LENGTH DIAMETER
turn of chuck. Hexagon head
70A
2-3/8"
1/4"
prevents rolling.
70BX
24
2-7/8"
3/8"
POINT
ORDER #
Steel STA-50323
Carbide STA-56092
PRICE
$11.11
$32.79
Need additional information?
Check out our website
or call 1-800-567-2131
Measuring
PUNCHES
Automatic centre
4" DRIVE PIN
Rugged automatic punches with all-steel handles and parts.
Features:
• Internal mechanism automatically strikes a blow when downward
pressure is applied
• Adjustable knurled cap regulates the force of the blow
• Spring tension, which regulates the blow, is constant so marks made by
the point are uniform in depth and size for each setting
• All sizes are identical in
style, differing only in
18B
striking power
MFG
#
LENGTH
DIAMETER
ORDER #
PRICE
• The point can be
18A
5"
9/16"
STA-50120
$40.18
easily removed for
18C
5-1/4"
11/16"
56757
$48.11
regrinding or
Point only for No. 18A
12902
$6.82
replacement
These Drive Pin Punches are well proportioned,
hardened, properly tempered, nicely finished, and
have a knurled finger grip. Each punch has the size
stamped on the head. Length 4".
Series 18 - With Adjustable Stroke
Point only for No. 18C
72445
$7.73
Automatic centre
Model 818 - With Adjustable Stroke
5"
5/8"
STA-53048
$35.42
CENTRE PUNCHEs
SERIES 117 - with Round Shanks
These centre punches are made of specially
selected steel, hardened and properly
tempered. Has accurately centred tips and
knurled grip for secure holding. The points
are ground at the proper angle to give
maximum service.
MFG # LENGTH
117AA
3"
117A
4"
117B
4"
117C
4"
117D
4"
117E
5"
DIAMETER AT TOP
OF TAPERED POINT
1/16"
5/64"
3/32"
1/8"
5/32"
1/4"
MFG #
565A
565B
565C
S565PC
PUNCH
1/16"
3/32"
1/8"
Set of 8 (1 of ea. size) in protective vinyl case
ORDER #
50482
50483
50484
STA-50485
50486
STA-50487
STA-50488
ORDER #
STA-52578
52579
STA-52580
STA-52587
PRICE
$5.92
$5.92
$5.92
$50.76
8" DRIVE PIN
SERIES 248
Intended for machine shop and motor service work,
designed to withstand hard use. Has knurled grip for
secure holding. Punches are extra long - 8". Bodies are
4-1/2" and drive pin sections 3-1/2" long.
Left to right:
Hardened and tempered.
MFG #
248A
248B
S248PC
PUNCH
1/8"
3/16"
Set of 5 (1 of ea size) in protective vinyl case
PRICE
$6.34
$6.34
$6.34
$6.34
$6.34
$7.82
$38.07
*Set of 5: AA, A, B, C, D in plastic case
ORDER #
STA-51181
STA-51182
STA-51186
PRICE
$7.51
$7.51
$46.00
TAP WRENCHES
T-HANDLE
93C
SERIES 93
These tap wrenches are properly heat treated to withstand
ordinary shop use. Use for holding taps, drills, reamers and
small tools to be turned by hand. Body is centered for use on
lathe centers
or upright
BODY
CAPACITY
SQUARE
drilling
MFG # LENGTH TAP SIZE
SHANK
ORDER #
machines 93A
2"
1/16 - 3/16" 1/16 - 5/32" STA-50427
to start tap 93B
2-1/2" 7/32 - 7/16" 5/32 - 1/4" STA-50428
straight.
93C
3-1/2"
1/4 - 1/2" 3/16 - 5/16" STA-50429
PRICE
$34.37
$36.49
$47.06
91A
SERIES 91
MFG #
117AA
117A
117B
117C
117D
117E
S117PC*
Left to right: 565A,
B, C, D, E, F, G, H
248A, B, C, D, E
Lightweight, knurled aluminum handle for a positive grip and easy
handling.
Features:
• No hammer required - just hold the punch in an upright position,
press the handle down, and a built-in mechanism strikes a perfect
center mark every time
• The force of the blow can be adjusted by turning the knurled cap
• All working parts made of properly hardened tool steel
• Works on metal,
plastics, wood and
other machinable
MFG # LENGTH DIAMETER
ORDER #
PRICE
materials
818
SERIES 565
The Starrett 91 Tap Wrench is
strong and well proportioned. It is nicely finished and the gripping surface
is properly tempered. It will firmly hold square or round shanks. It is
plunger operated by knurled sleeve – the spring inside the sleeve causes
plunger to
BODY CAPACITY
SQUARE
back off
MFG # LENGTH TAP SIZE
SHANK
ORDER #
PRICE
when
91A
6"
1/16 - 1/4" 3/32 - 5/32" STA-50419
$47.59
pressure
91B
9"
3/16 - 1/2" 5/32 - 9/32" STA-50420
$69.79
is
91C
12"
1/4 - 5/8" 5/32 - 3/8" STA-50421 $113.16
removed.
91D
16"
5/16 - 3/4" 13/64 - 7/16" STA-50422
$150.16
25
Measuring
Above: Our Edmonton CSRs
Below: Our Calgary CSRs
Thomas Skinner is committed to maintaining total customer
satisfaction. We pride ourselves on providing our customers
with the information and the tools they need to be successful.
All of our Customer Service Representatives are linked together so
you always talk to the next available CSR regardless of which branch
you are calling.
You can direct dial your favourite CSR.
Our CSR’s can see inventory levels in all Thomas Skinner locations
in real time. This means your
order will be shipped out of the closest stocking branch location.
Our Winnipeg CSR
If we don’t have your order in stock, we can ship it direct from our
suppliers* — you get it faster!
Visit our showrooms for product demo’s or pick up your order in
person.
Customer Service/
Inside Sales
604-207-3117 or
1-866-993-3117
Service & Parts
604-207-3100 or
1-866-779-2131
26
Many convenient ways to place your order:
Over the phone 604-207-3177 or 1-866-993-3117
Online www.thomasskinner.com
By email to one of our CSR’s
By fax to your local branch
* Direct ship available with certain suppliers only
Our Vancouver CSRs

Measuring - Thomas Skinner!

Transcription

Similar documents

How to adjust DeVlieg@ Micro-AdjustrM Standard Boring Bars

USC Super Dry Dial Single Jet Hot Water Meter

ANIMAL INSTINCT COLLECTION: ALFEX GOES WILD

seen here - The British Sundial Society

the Office Depot® Lomita Chamber of Commerce Program!

All hail the return of yellow gold

Agrifim TimerInstallGuide - Irrigation-Mart

BEFORE: AFTER: DURING:

evolution revolution icon