MID-YEAR - Spyderco

Transcription

MID-YEAR - Spyderco
MID-YEAR
1
CLIPITS
C28
C28GPFG DRAGONFLY
I
t seems like smaller knives get respect equivalent to their size,
very little. Most people don’t look at a subcompact lightweight
car and think “high-performance vehicle”. That estimation can
change when it’s revealed that little clown-car disproportionately
packs 350 horsepower and a high-speed racing package. Stature
doesn’t always accurately represent ability and performance, as
exampled in the Spyderco Dragonfly. Its cutting ability is unequal to
its diminutive package and innocuous name. The small-knife–big-
feel, works through providently executed ergonomics and premium
components like VG-10 blade steel, a foliage green G-10 handle.
Shape also matters - the full flat-ground blade has a spine cusp
providing the thumb a natural settling place, controlling the cutting
edge. G-10 handle hits all the correct pressure points in the hand and
has a purposeful flat shelf at the base where the pinkie finger rides as
a leveraging point. Deep pocket wire clip.
MEASUREMENTS
SPECS
Steel: VG-10
Weight: 2oz (56g)
5.25in
140mm
Edge: P
2.25in
57mm
1.875in
48mm
Country of Origin: Japan
Clip: Left/Right
3.1875in
81mm
Tip Carry: Up
Overall Blade Edge Closed
2
CLIPITS
C36
C36GOR MILITARY
G
gloves. Texturing above the hole holds the thumb in contact with the
blade’s spine during cutting for confident control over the sharpened
edge. The handle scales are orange G-10 with the lock’s liner nested
(inlayed) directly into the scale, pumping up lock strength without
adding bulky liners. Spacers between the scales create a gap running
the handle’s full length exposing the inside workings for inspection
and cleaning. The handle flares slightly at the front end creating a
finger choil and at the butt end, which keeps the knife from slipping
forward or backward in the hand. A contoured metal clip is set for
right-hand tip-down carry.
-10 is a synthetic composite of fiber glass permeated with
epoxy resin that’s then exposed to pressure. It is indispensable
to the printed circuit board industry. Some knife brainiac
discovered it also makes great knife handles making it indispensable
to the knife industry as well. G-10 resists water, cold, heat and
corrosion and lasts, wears and carries better than natural handle
materials and lighter than a steel handle. It also comes in different
colors. Spyderco’s cornerstone Save and Serve line includes the C36
Military Model, now with a safety orange G-10 handle. The Orange
‘Millie’ has a modified clip-point CPM-S30V blade laser cut with a
14 mm Spyderco Round Hole for quick deployment and for use with
MEASUREMENTS
SPECS
Steel: CPM-S30V
9.5in
241mm
4in
102mm
Weight: 4.25oz (120g)
Edge: P
3.6875in
94mm
Country of Origin: USA
Clip: Right
5.5in
140mm
Tip Carry: Down
Overall Blade Edge Closed
3
CLIPITS
C90
C90BK STRETCH LIGHTWEIGHT
T
he Spyderco Stretch has changed over the years. What started
as a small basic Hunter model in the 1980s matured/stretched
into an elegant high performance drop point folder available
with a variety of handle materials and blade steels. The two latest
Stretches are both lightweight models with FRN (fiberglass reinforced
nylon) handles. C90BK comes with a VG-10 modified drop-point blade,
the C90BL is ZDP-189 blade steel. Both are ground thin and fullyflat with an arcing belly; winners for outdoor endeavors and carrying
everyday. Turned-out with a mid-spine positioned back lock the
FRN handles are injection molded and surfaced with Bi-Directional
Texturing®. When the palm meets the texturing tactile resistance
results, stopping in its tracks any forward or backward sliding even
under harsh, wet or slippery cutting circumstances. C90BK Stretch
Lightweight has a black FRN handle and Japanese VG-10 imported
steel blade.
MEASUREMENTS
SPECS
Steel: VG-10
Weight: 3.4oz (95g)
7.9375in
202mm
Edge: P/PS/S
3.5in
89mm
3.1875in
81mm
Country of Origin: Japan
Clip: Left/Right
4.375in
113mm
Tip Carry: Up/Down
Overall Blade Edge Closed
4
CLIPITS
C90
C90BLE STRETCH
C
90BLE Stretch Lightweight has a blue FRN handle and exotic
Japanese ZDP-189 blade. The steel is manufactured using
powdered metal technology and is one of the hardest, highest
performing knife steels used in the knife industry today. 3% of its
component composition is pure carbon making the steel harder with
expansive edge retention. At press, Spyderco was one of a handful of
cutlers working with ZDP-189 blades.
MEASUREMENTS
SPECS
Steel: ZDP-189
Weight: 3.4oz (95g)
7.9375in
202mm
Edge: P
3.5in
89mm
3.1875in
81mm
Country of Origin: Japan
Clip: Left/Right
4.375in
113mm
Tip Carry: Up/Down
Overall Blade Edge Closed
5
CLIPITS
C101
C101G2 Manix2 86mm
M
anix2 86mm – A recipe for folding knife success: Start with
hard-use rated lock. Add a blade made of exotic high carbon
steel. Manufacture it in Golden, Colorado using precise
tolerances. Finally toss in a healthy dash of American innovation.
Combine ingredients to make the Manix2 86mm, and top it off with one
of the strongest locks to date, The Ball Bearing Lock®. It’s a hardened
free-floating ball bearing contained in a custom polymer cage,
allowing the lock to self adjust across a large surface and smoothly
and consistently lock-up with solid confidence. The lock’s strength
withstands hard work with a secure, versatile and comfortable grip.
The blade is 154CM, hollow-ground with aggressive thumb serrations
(jimping) above a 14mm Spyderco Round Hole. The Jimping doesn’t
stop there. Full steel scale liners have jimping extending beyond the
G-10 handle scales scalloping areas of the handle’s perimeter. This one
isn’t slipping out of your hand. The liners pull double purpose adding
rigidly and lightweight strength to the handle. Three-screw clip.
MEASUREMENTS
SPECS
Steel: 154CM
Weight: 5oz. (143g)
8in
203mm
3.375in
86mm
Edge: P, PS, S
Country of Origin: USA
2.875in
73mm
Clip: Left/Right
Tip Carry: Up
4.625in
117mm
Overall Blade Edge Closed
6
CLIPITS
C123
C123 TITANIUM SAGE
S
Lock. This modification uses the handle scale as the lock’s liner. With
the back portion of the handle doubling as both handle and lock,
the need for internal liners is dispensed with and the knife can be
manufactured lighter and slimmer while staying strong. Spear-point
shaped CPM-S30V is flat-ground and coalescence of Spyderco’s Caly3
and Native Models in shape and performance. Titanium handle is
screw constructed. Phosphor bronze washers for smooth open/close.
Silhouette wire clip snugs deeply in a pocket. Jimping covering the
spine and finger choil puts the skids on slipping and sliding.
econd up in our Sage Series is the titanium Sage. The Sage
Series materializes three decades of Spyderco pioneering
knifecraft and innovation. The series reprocesses a similar
shaped and sized folder, releasing a new version annually. Each
rendition highlights a locking device or mechanism, crediting that
mechanism’s inventor. The first Sage recognized knifemaker Michael
Walker’s creation of the LinerLock® with a ball bearing detent method
of locking (closed) a folding knife. Sage number two focuses on
knifemaking trendsetter Chris Reeve’s embellishment of that original
Walker LinerLock by his morphing it into his R.I.L.- Reeve Integral
MEASUREMENTS
SPECS
Steel: CPM-S30V
7.125in
181mm
Weight: 3.5oz (99g)
Edge: P
3in
76mm
Country of Origin: Taiwan
2.625in
67mm
Clip: Left/Right
4.1875in
106mm
Tip Carry: Up
Overall Blade Edge Closed
7
CLIPITS
C132
C132 Chokwe
K
nives as essential tools exist in every culture on earth. Their
shape and style dictated by their people’s needs, be those
agricultural, spiritual or self preserving. Certainly ethnic
styles of cutlery have been lost to history but many designs are
still today used and revered in their respective countries. Taking
those individual designs and adding a “Spyderco touch” is the core
of Spyderco’s Ethnic Series folders and most recently the Chokwe.
Chokwe people live in the Zambia/Democratic Republic of Congo
region of Central Africa. Primarily agricultural, they are gatherers,
fishermen and hunters. Highly positioned in their society are
blacksmiths who craft fixed blade knives for daily use in feeding,
harvesting and protecting their communities. Our Chokwe folder is
patterned off a historic fixed-blade, keeping true to the triangular
shaped blade and coffin-shaped handle. The blade is CPM-S30V blade
steel and ground flat. The handle is black G-10 with bored-out handle
holes reducing overall weight and creating holes for attachment to a
long handle or pole, (think spear). Full length internal liners reinforce
the Reeve Integral Linerlock (R.I.L.). Metal hourglass clip carries the
knife tucked in the pocket tip-up right hand carry. There is nothing on
the modern market like it.
Keep a Child Alive is dedicated to providing life-saving anti-retroviral treatment, care and support services to
children and their families with HIV/AIDS in Africa and the developing world by directly engaging the global public
in the fight against AIDS. Spyderco will donate approximately 5% of sales of the Chokwe to the Keep a Child Alive
Organization. For more information, please visit www.keepachildalive.org
MEASUREMENTS
SPECS
Steel: CPM-S30V
8.5in
216mm
3.75in
95mm
Weight: 3.7oz (104g)
Edge: P
3.375in
86mm
Country of Origin: Taiwan
Clip: Right
4.75in
121mm
Tip Carry: Up
Overall Blade Edge Closed
8
CLIPITS
LFG3
LFGP3/LFGS3 LADYBUG
L
adybugs are beneficial and advantageous to humans.
Spyderco Ladybugs are too. Our Ladybugs have a common
denominator: they’re small, innocuous, cut like the devil,
carry well on a keychain and become an indispensable tool for
everyday life. New for 2009 we’re issuing a foliage green lightweight
Ladybug. Foliage green is the green hue used in the U.S. Army’s
digital camo. It has the curious ability to shade-shift from green
to gray blending into surrounding colors and backgrounds. The
modified clip-point VG-10 blade is hollow-ground with a fully
serrated SpyderEdge or all PlainEdged. Uniformly thick from
heel to tip, the blade delivers durability and strength. The FRN
(fiberglass reinforced nylon) handle is Bi-Directionally Textured®
and comfortably angular in everyway the hand can grip it. The
relative position of the Spyderco Round Hole to the pivot and backlock is key in its design so that even though very small, the folder
opens one handedly and gives the perception of being larger in the
hand than it truly is. Ladybugs are clipless, with a lanyard hole for
attachment to a keychain or thong.
MEASUREMENTS
SPECS
Steel: VG-10
Weight: 0.6oz (18g)
4.375in
111mm
Edge: P/S
1.9375in
49mm
1.6875in
43mm
Country of Origin: Japan
Closed
Clip: N/A
2.4375in
62mm
Tip Carry: N/A
Overall Blade Edge Closed
9
SALT SERIES
C77
C77YL SPYDERHAWK SALT
H
awbills are deeply curving blades, an invention of necessity
out of the marine and commercial fishing industry. Fishermen
are partial to curved blades because they often cut pulling
downward at arm’s length away from themselves separating and
freeing lines and netting. The curved tip grabs and pulls what’s being
cut into the sharpened cutting edge. It didn’t take long for boaters,
white water rafters and knife enthusiasts to warm to the functionality
of this blade shape. The perfect union for cutting in or around water
would be a Hawkbill blade made of H-1 non-rusting steel. Spyderco’s
SpyderHawk Salt is it. 100% rust free, it has a hollow-ground H-1
blade, rust-free internal components and a titanium pocket clip.
Also geared to water applications. The handle is easy to see Marine
Yellow FRN (fiberglass reinforced nylon) with Volcano Grip® texturing.
Handle texture supports gripping the knife in gloves or in wet, slippery
conditions. Left/right pocket clip carried tip-up and a piped lanyard
through the handle is just waiting for a thong or cord to doubly attach
the folder to your person in water.
MEASUREMENTS
SPECS
Steel: H-1
VG-10
Weight: 3oz
2oz.(85g)
56g
8.25in
210mm
Edge: S/P
P/
3.625in
92mm
Country of Origin: Japan
3.375in
85mm
Clip: Left/Right
L/R
4.9375in
125mm
Tip Carry: Up
Overall Blade Edge Closed
10
SALT SERIES
C91
C91BBK Pacific Salt
P
acific Salts offer dependable high performance with a neverrust H-1 steel blade. Available for the first time with a black
carbonitride coated blade. Coating the steel lessens its
reflective qualities and perceptibility. Spyderco’s Salt Series shines in
fresh and saltwater resisting rust even without cleaning and polishing.
Hollow-ground blade is PlainEdged and has added roundness at the tip
MEASUREMENTS
SPECS
Steel: H-1
8.6875in
221mm
3.8125in
97mm
where knives see the greatest use. Internal steel parts are impervious
to rust and pitting and the clip is black coated titanium. The Spyderco
Round Hole is expanded to 14mm for opening/closing the blade with
wet, gloved or numb hands. Injection molded FRN handle is beaded
with a textured pattern for added purchase and grip. For water-use
the lanyard hole accepts a thong or cord for backup attachment.
Weight: 3oz (85g)
Edge: P
3.4375in
88mm
Country of Origin: Japan
Clip: Left/Right
4.875in
124mm
Tip Carry: Up
Overall Blade Edge Closed
11
FIXED BLADES
FB05
FB05 BROWN TEMPERANCE2
P
rimed and ready for harsh cutting. If you’re looking for a small
benign fixed blade, this is not what you seek. Basic chores from
fingernail maintenance to fishing would be better serviced with
a lesser blade but if you’re traipsing about forest or field this has your
name all over it. The Temperance’s leaf shaped VG-10 stainless blade
is full flat-ground all the way to the cutting edge. The blade is also
double-distal tapered (tapered vertically from the spine to the sharp
edge and additionally tapered horizontally from tip to tang). Double
tapering reduces resistance and friction while the blade passes
MEASUREMENTS
through something during cutting, penetrating or slicing. In judging
overall performance, equally important as the blade is the handle.
Temperance2’s three-dimensional mocha-colored canvas Micarta
handle has flaring expansions at the pommel. These double as a
hand guard and keep the blade slip-proof and rooted while cutting in
a forward or backward grip. A skeletonized tang runs the full length
of the handle. Temperance2 comes in a fitted Boltaron sheath with
G-Clip attachment system allowing you to clip it vertically, horizontally,
in the small of back or to strap, belt or pack.
SPECS
Steel: VG-10
9.75in
247mm
Weight: 6.75oz (192g)
Edge: P
4.875in
124mm
4.8125in
122mm
Country of Origin: Japan
Carry: Boltaron Sheath
w/G-clip
Overall Blade Edge Closed
12
SLIPITS
C131
C131 TERZUOLA SLIPIT
Y
ou see interesting knives and equally interesting people when
walking the aisles of a knife show. Small by business standards
and specialized in nature, the cutlery industry has names
everyone knows. One is Bob Terzuola, we call him Bob T. Bob has
made handmade knives since the 1970s, has collaborated with the top
production companies and is acknowledged as the founder of tactical
knifemaking. In our small industry he’s a rock star. His designs are
clean, militaristic, finely polished and perceived as having a high-level
of performance and physical appearance. His fourth collaboration
with Spyderco is the Bob T SLIPIT. SLIPITS are a new benchmark in
knives, non-locking one-hand open folders with pocket clips. Bob
T’s SLIPIT has a CPM-S30V modified Wharncliffe blade that to close
must overcome the resistance of a small ball bearing. Bob calls this
a Ball Joint non-locking system; he’s developed and refined on many
custom pieces for close to a decade. The Ball Joint also half-stops
the blade when closing for safety. Behind the cutting edge he placed
a finger choil/guard keeping the index finger away from the open
blade and keeping the blade from closing on the hand when cutting.
He also made the blade under three inches keeping it legal in most
jurisdictions and countries (England and Germany to name a couple)
for carry anywhere. Carbon fiber handle and backspacer make this
carry friendly SLIPIT both hi-tech and luxurious. Left/right pocket clip
is nested in its’ mounting and won’t pivot or loosen. A folded leather
lanyard comes with it, tied off with a silver crimp. MEASUREMENTS
SPECS
Steel: CPM-S30V
7in
177mm
3in
76mm
Weight: 2.5oz (70g)
Edge: P
2.6875in
68mm
Country of Origin: Taiwan
Clip: Left/Right
4in
101mm
Tip Carry: Up
Overall Blade Edge Closed
13
SLIPITS
C133
c133 bug
A
erodynamically bumble bees shouldn’t be able to fly but
someone forgot to tell the bees that. They defy nature and
expectations, that something that small performs such a
grand maneuver. Like bumblebees, Spyderco Bugs perform the
unexpected. The smallest folder in Spyderco’s 2009 lineup they’re
part of the SLIPIT group Spyderco began offering last year. They
fill the smallest seat in an expanding selection of non-locking slip-
MEASUREMENTS
joint knives. Since there is no locking device holding the blade open,
they rely on resistant pressure at the pivot area and keep the blade
open during use. Their blades are 3Cr steel available PlainEdged.
Bug handles offer a flat surface for a small amount of engraving or
embellishment or customize them as jewelry or a gift. Lanyard hole
is large enough to accept a chain and worn around the neck or slipped
onto a keychain.
SPECS
Steel: 3Cr
Weight: 0.4oz (12g)
2.875in
73mm
1.3125in
33mm
Edge: P
1.125in
29mm
Country of Origin: China
Clip: N/A
1.625in
41mm
Tip Carry: N/A
Overall Blade Edge Closed
14
SLIPITS
C94
C94GPFG3 UK PenKnife
Drop Point Foliage Green
N
o one has made clip-carry, one-hand open, non-locking
folders before. Now we do….we call them SLIPITS.
Spyderco’s SLIPIT line continues expanding as global
necessity and preference for non-locking folders grows. Locking
folders continue gaining pariah status, we’ve recognized this trend
and started creating designs that are a synthesis of modern and
traditional. SLIPITS are reliable non-locking folders which are
socially friendly and internationally accepted for slip in your pocket
urban carry. Our new drop-point Penknife has a blade held open
by a notched-joint at the knife’s pivot. When closing the blade
the notch produces resistance, functionally similar to traditional
slip-joint penknives. To achieve heightened safety, control and
comfort, Spyderco designers add a deep finger choil positioning the
index finger on the bottom of the blade directly under the thumb.
This lets you choke-up nearer the cutting edge with comfort and
dexterity. The handle is foliage green G-10 with a tension-wire clip
that carries deeply in the pocket, tip-up and either left or righthanded. The CPMS30V hollow-ground laser cut blade is a droppoint available PlainEdged.
MEASUREMENTS
SPECS
Steel: CPM-S30V
Weight: 2.5oz (70g)
6.9325in
176mm
3in
76mm
Edge: P
2.625in
67mm
Country of Origin: USA
Clip: Left/Right
4.0625in
103mm
Tip Carry: Up
Overall Blade Edge Closed
15
S
CLIPITS
C94
UK PenKnife Rescue Orange
S
pyderco’s SLIPIT line continues expanding as global necessity
and preference for non-locking folders grows. Locking
folders continue gaining pariah status, we’ve recognized this
trend and started creating designs that are a synthesis of modern
and traditional. SLIPITS are reliable non-locking folders which are
socially friendly and internationally accepted for slip in your pocket
urban carry. Our new Rescue Penknife’s blade is held open by a
notched-joint at the knife’s pivot. When closing the blade the notch
produces resistance, functionally similar to traditional slip-joint
penknives. To achieve heightened safety, control and comfort, a
deep finger choil positions the index finger on the bottom of the
blade directly under the thumb. This lets you choke-up nearer the
cutting edge with comfort and dexterity. The handle is safety orange
G-10 with a tension-wire clip that carries deeply in the pocket, tipup and either left or right-handed. The CPMS30V hollow-ground
blade is a Sheepfoot shape available SpyderEdged.
MEASUREMENTS
SPECS
Steel: CPM-S30V
Weight: 2.5oz (70g)
6.8125in
173mm
2.9375in
74mm
Edge: S
2.75in
70mm
Country of Origin: USA
Clip: Left/Right
4.0625in
103mm
Tip Carry: Up
Overall Blade Edge Closed
16
RESTRICTED KNIVES
RESTRICTED ITEM KNIVES
RULES & REGULATIONS
The manufacture and purchase of automatic (opening) knives is regulated by18 U.S.C. Section 1716 (g) (2) (1-4) and 15 U.S.C. Section 1244 (2-4).
In buying these knives as a dealer or as an end-line consumer I hereby attest that I am authorized and legally able to purchase, have shipped to
me, and possess an automatic knife according to the federal regulations and any applicable state laws. Federal law prohibits shipment and carry
of automatic opening knives across state lines. Exceptions:
(1) to civilian or Armed Forces supply or procurement officers and employees of the Federal Government ordering, procuring, or purchasing such
knives in connection with the activities of the Federal Government;
(2) to supply or procurement officers of the National Guard, the Air National guard, or militia of a state, territory or the District of Columbia
ordering, procuring, or purchasing such knives in the connection with the activities of such organization;
(3) to supply or procurement officers or employees of the municipal government of the District of Columbia or the government of any State or
Territory, or any county, city or other political subdivision of a State or Territory;
(4) to manufacturers of such knives or bona fide dealers therein in connection with any shipment made pursuant of an order from any person
designated in paragraphs (1), (2), and (3).
*Spyderco will not sell automatic knives to any individual outside the State of Colorado without meeting these conditions.
RELEASE, ASSUMPTION OF RISK, WAIVER OF LIABILITY AND INDEMINITY AGREEMENT.
By purchasing any item produced by Spyderco, Inc. the buyer assumes responsibility to ascertain and follow all applicable federal, state, local and
international laws in regard to possessing, owning, using, carrying, shipment, transporting, and use of any Spyderco product. All knives are sold
subject to public law 90-351, title III, U.S.D., Section 2511, and any local, state or federal ordinances. The buyer expressly agrees to indemnify
and hold harmless Spyderco, Inc. for all claims resulting directly or indirectly from the purchase, ownership, transportation or use of the item in
violation of applicable federal, state and local laws or regulations. In doing so, the buyer represents that the knives or products purchased will
be used in a lawful manner and that they are of legal age. Spyderco is not liable for misuse of any Spyderco knife or product purchased either
directly from Spyderco or from a dealer/distributor. No product is 100% effective against attack, Spyderco assumes no responsibility if a product
purchased from Spyderco is not effective in preventing bodily injury, dismemberment or death. Purchaser must be 18 years of age to purchase
Spyderco knives, no exceptions. Spyderco’s warranty gives you certain legal rights. You may have other rights, which vary in different states
and municipalities.
Copyright © 2009. All rights reserved. All product names, art and text herein are the property of Spyderco, Inc.
and may not be reproduced in part or whole without the sole written permission of Spyderco, Inc.
* Information
this catalog
subject
change
products,
materials,
ME
A S included
U RinE
M isE
N toT
S without notice. Modification
S ofP
EC
S measurements,
technical specifications and availability can occur. Contact your local Spyderco dealer for information.
Steel: VG-10
Spyderco Inc.
Weight: 2oz. 56g
Edge: P/
820 Spyderco Way
Golden, CO 80403
Country of Origin: Japan
P: 800-525-7770 X223 – local: 303-279-8383
Clip: L/R
F: 303-278-2229
Tip Carry:
E: [email protected]
Overall Blade Edge Closed
www.spyderco.com www.byrdknife.com
17
RESTRICTED KNIVES
C121
C121 BK EMBASSY
S
pyderco’s ambassador of automatic folders. Slim profile carries
unobtrusively with ease. Machined finger choil and refined
ergonomics maximize control and broad-spectrum usability. Auto
blade snaps satisfyingly open, locked, loaded and ready for action.
• Right-hand automatic blade-opening deployment
• Clear hard anodized and machined aluminum handle with G-10
scale inlays for enhanced grip
• 3-way black steel clip carries: Right hand tip-up/tip down: Left
hand tip-up
• Machined finger choil
•B
ack-up safety switch positioned adjacent to automatic
open button
• Screw together construction
• Trademark Spyderco Round Hole
• Flat saber-ground CPM S30V blade steel
• Spine jimping
• Spine swedge-grind reduces weight
• Made in Golden, Colorado U.S.A.
SPECS
MEASUREMENTS
Steel: CPMS30V
Weight: 3.6oz (101g)
7.375in
187mm
Edge: P/PS/S
3.125in
79mm
3.125in
79mm
Country of Origin: USA
Clip: Left/Right
4.28125in
109mm
Tip Carry: Up/Down
Overall Blade Edge Closed
18