wedi Shower Accessories (TDS)
Transcription
wedi Shower Accessories (TDS)
Technical Data wedi® Shower Accessories Technical Data wedi® Shower Accessories Overview A secret among bath design professionals is to use L- and U-shaped wedi Building Panels to create more tileable surfaces in the bathroom. To accommodate this popular trend, wedi prefabricates many products and provides solutions for on-site customization of shapes and styles. Not only can you waterproof your tile substrates, but you can eliminate wooden framework by installing prefabricated design elements tailored to fit your special needs. wedi Prefabricated Elements include shower seats and benches, niches, curbs and ramps. Product Features • • • • • • • • • Lightweight, easy to handle, cut & install Waterproof as tested and demonstrated according to ANSI A118-10-1999 Mold/Mildew proof Thermally insulating Great for tile bonding using any cement or epoxy based thinset mortar Dimensionally stable, inert, does not deteriorate Contains no fibers or paper layers; and will not delaminate or fuel flames in fire emergencies Replace traditional cement boards and waterproof membranes in wet areas such as showers and steam showers Provides a perfect surface for tiling wedi Prefabricated Shower Seats and Benches Create the perfect waterproof seating solution for your shower. wedi Shower Seats and Benches install much quicker and easier than metal tray or concrete seats. Plus, they are 100% waterproof due to the CFC-free extruded polystyrene closed cell foam core. Full Foam Triangular Corner Seat The wedi Full Foam Triangular Corner Seat is a fully prefabricated corner seat is 100% waterproof throughout. Unlike other systems, such as those made with non-waterproof white expanded polystyrene (EPS), wedi Full Foam Triangular Corner Seat does not need to be treated with a waterproof membrane anymore. In addition, the top surface is slightly sloped at a rate of 1/8”/ ft. to allow water to run off toward the floor drain. The seat can be cut to virtually any size. Where the cut and the blue foam is exposed, adhere, for example, an 1/8” thick wedi panel piece to this area to recreate a perfect surface to bond tile to. This corner seat can be used in wedi systems, conventional shower systems or even over older, existing tiles in an existing shower. The core of the seat is made of extruded polystyrene foam and is coated with a rigid, sanded epoxy-based coating to accommodate for heavy duty commercial use. 2 Technical Data: wedi® Shower Accessories Installation of wedi Full Foam Triangular Corner Seat 1 Dry fit the seat into the squared backerboard corner of your shower. Make sure it will firmly attach to the two walls leaving no hollow areas between. 2 Mark the seat’s contact area so you know which area need to be covered with a 3/8” thinset application. 3 Apply modified thinset to both wall areas and the floor area the seat will touch using a 3/8” x 3/8” notch trowel. Apply more thinset in the sloped shower floor area to fill voids. 4 Firmly attach the seat into the thinset bed and hold in position tightly using weights (tile boxes or similar leaning against the seat leaning against the seat until the thinset can keep the seat in it’s position) 5 Apply a 1/2” bead of wedi® Joint Sealant to all wallseat seams. The sealant will provide a waterproof and flexible seal. 6 On the bottom seam, fill the gap between the seat nottom and shower base slope with thinset and apply alkali resistant wedi® Mesh Tape 7 Spread the wedi® Joint Sealant flat over the seam using a wedi® Corner Putty Knife. Cover 3/4” of either side of the seam with the sealant. 8 Your seat is ready to tile immediately once the wedi® Joint Sealant is tack free. 3 Technical Data: wedi® Shower Accessories AssemblyInstructions Instructions Assembly Assembly AssemblyInstructions Instructions Floating Corner Seat wedi corner seats not only install quicker and easier than any metal tray or concrete seat, but they are also totally unaffected by water due to their closed cell foam base. The polyurethane® ® brackets allow for flexible installation and make sure that the tiled wedi seat based mounting can carry up to 300 lbs. of weight. No adddtional blocking is needed and the product can even ® against ® be installed an existing tiled corner if needed. wedi Corner CornerSeats Seats| |M, M,L L wedi wedi wedi Corner CornerSeats Seats| |M, M,L L ® ® wedi Corner Seat wedi Corner MM Installation ofSeat wedi Corner Seats | Medium and Large • 17” x®17” (wall sides), thickness 4” (Item# 073784300) • 17” x®17” (wall sides), thickness wedi wedi Corner Corner Seat Seat MM 4” (Item# 073784300) ® ® wedi Seat Lthickness wedi Seat Lthickness • 17” • 17” x ®Corner 17” x Corner 17” (wall (wall sides), sides), 4” 4” (Item# (Item# 073784300) 073784300) wedi Corner Seat M • 24” x®24” (wall sides), thickness (Item# 073784400) • 24” x®24” (wall sides), thickness 4” 4” (Item# 073784400) wedi wediCorner Corner Seat Seat L L • 17” x 17” (wall sides), thickness 4” (item #073784300) • 24” • 24” x 24” x 24” (wall (wall sides), sides), thickness thickness 4” 4” (Item# (Item# 073784400) 073784400) ® wedi ® ®Corner Seat L wediSeat Seat assembly consists wedi assembly setset consists of:of: •• 24” 24” (wall sides), thickness 4” (item #073784400) ® xelement ® Seat • (2) mounting •wedi Seat element •set (2) mounting brackets wedi Seat Seat assembly assembly set consists consists of: of:brackets ® ® ® wedi Seat assembly consists of: meshtape •• (6) fasteners •• wedi meshtape •• (6) fasteners •• wedi Seat Seat element element (2) (2) mounting mounting brackets brackets ® ® ® ® • tube of wedi joint sealant •• tube offasteners wedi joint sealant• (2) Element mounting brackets meshtape (6) •Seat (6) fasteners • wedi • wedimeshtape ® ® ••(6) Fasteners • wedi® meshtape • tube tube of of wedi wedi joint joint sealant sealant •Installation: tube of wedi® joint sealant Installation: Installation: Installation: 1 ® ® joint sealant on the mounting Apply wedi 1. 1.Apply wedi joint sealant on the mounting Apply wedi Jointside Sealant to will thewill side of the mounting bracket brackets side attached to the bebe attached to the ® that ® that 1. 1.brackets Apply Apply wedi wedi joint joint sealant sealant onon the the mounting mounting ® that will be to the wedi Building Panel wall. ®attached wall. wedi wall. wedi brackets brackets side side that that willwill bebe attached attached to to thethe ® ® wall. wall. wedi wedi area area is covered. is covered. 3 Using a level, make sure you can achieve a slight pitch (1/8” over Use aft.).level make sure you can achieve 3. 3.Use a1level to to make sure you can achieve a 2 Evenly distribute joint sealant with 2. 2.Evenly distribute thethe joint sealant with a a Evenly distribute wediuntil Joint Sealant with acontact notched trowel notched trowel until the whole contact trowel the whole 2.until 2.notched Evenly Evenly distribute distribute the the joint joint sealant sealant with with a a the whole contact area is covered. area is covered. area is covered. notched notched trowel trowel until until thethe whole whole contact contact 4 a slight pitch (1/8” over 1 ft). (1/8” over 1sure ft). 3. 3.slight Use Use a pitch level a level to to make make sure you you can can achieve achieve a a slight slight pitch pitch (1/8” (1/8” over over 1 ft). 1 ft). Mount the brackets through the wedi Building Panel wall ® ® wall into the solid 2’brackets x 4’ wooden framework. Mount brackets through wedi 4. 4. Mount thethe through thethe wedi wall panels into the solid 2’ x 4’ wooden into the solid 2’ x 4’ wooden framework. ®framework. ® 4. 4.panels Mount Mount thethe brackets brackets through through thethe wedi wedi wall wall panels panels into into thethe solid solid 2’ 2’ x 4’ x 4’ wooden framework. framework. 4wooden Technical Data: wedi® Shower Accessories ® ® 5. 5.Apply wedi sealant to to thethe blue foam 6. 6.Press thethe seat element into position andand Apply wedijoint joint sealant blue foam Press seat element into position ® ® of of thethe seat that willwill contact wedi apply a weight (i.e.Tile box) so so that thethe 5 edges 6 edges seat that contact wediwall apply a weight (i.e.Tile box) that wall sealant can set under bond pressure. or or brackets using a notched trowel. sealant can set under bond pressure. brackets using a notched trowel. Using a notched trowel,® apply wedi Joint Sealant to the blue Press the seat element into position and apply a weight (i.e., ® Apply wedi joint to wedi the blue foam 6. tile 6. Press the seat element position and 5. 5. Apply wedi joint sealant to the the blue foam Press the seat element position foam edges of the seat that willsealant contact Building box) so that the sealant caninto setinto under bondand pressure. ® ® Paneledges wall or of brackets. edges of the contact wedi apply a weight (i.e.Tile so that wallwall the seatseat thatthat willwill contact wedi apply a weight (i.e.Tile box)box) so that thethe sealant under bond pressure. or brackets using a notched trowel. or brackets using a notched trowel. sealant cancan set set under bond pressure. 7 ® ® Apply wedi Meshtape to tape the transition joint between the 7. 7.Apply wedi andand tape the Apply wedimeshtape meshtape tape the seat element and the wedi Building Panel wall. Apply a flat transition joint between seat element and transition joint seatfully element thinset mortar bed over thebetween Meshtape and embed it.and ® ® wedi Apply a flat thinset mortar bedbed wediwall. wall. Apply a flat thinset mortar over the meshtape andand fully embed it. it. ® ® over the meshtape fully embed Apply wedi meshtape and tape 7. 7. Apply wedi meshtape and tape thethe transition joint between element transition joint between seatseat element andand ® ® wedi wall. Apply a flat thinset mortar wedi wall. Apply a flat thinset mortar bedbed Straight Bench meshtape embed overover thethe meshtape andand fullyfully embed it. it. This 100% waterproof bench is a prefabricated sampling of what can often be installed onsite and in custom dimensions, using our 2” building panels, which provide the structural strength needed for seats and benches. Its hollow inside allows for additional installation space for plumbing and electric parts in steam showers and large spa function showers. It is sloped on the top surface area at a rate of 1/8” / ft. to make sure water can run off to the floor drain. 8 Step 7 now tohappens the underside of the seat element. Apply 8. Apply same step now on on thethe 8.TheThe same step happens now Meshtape and thinset mortar to the vertical seams as well. underside of of thethe seat element where it isit is underside seat element where connected to the wall using mesh tape andand connected to the wall using mesh tape thinset mortar. TheThe short vertical seams areare thinset mortar. short vertical seams The same step happens now the 8. 8. The same step happens now on on the taped with mesh and thinset mortar as well. taped with mesh thinset mortar asit well. underside of the seat element where is underside of the seatand element where it is connected to the using mesh tape connected to the wallwall using mesh tape andand thinset mortar. short vertical seams thinset mortar. TheThe short vertical seams are are taped with mesh thinset mortar as well. taped with mesh andand thinset mortar as well. wedi Corporation wedi Corporation • Elk Grove Village, IL 60007 1100 Landmeier Road, Suite 200 • 1100 Landmeier Road, Suite 200 Elk Grove Village, IL 60007 • Fax. 847-357-9819 Tel.Tel. 877-933-WEDI (9334) • Fax. 847-357-9819 877-933-WEDI (9334) • www.wedicorp.com [email protected] • [email protected] www.wedicorp.com wedi Corporation wedi Corporation • Elk• Grove Elk Grove Village, IL 60007 1100 Landmeier Road, 1100 Landmeier Road, SuiteSuite 200200 Village, IL 60007 • Fax. • Fax. 877-933-WEDI (9334) 847-357-9819 847-357-9819 Tel. Tel. 877-933-WEDI (9334) • www.wedicorp.com • www.wedicorp.com [email protected] [email protected] 5 Technical Data: wedi® Shower Accessories wedi Prefabricated Niches wedi Prefabricated Niches are fabricated from ½” Building Panels and come in three different size options. The perfect fit for all your shower necessities, our niches install quickly and safely, and integrate flush into the wall panel assembly with wedi fasteners. 1 16” x 8” Rectangular Niche Cut out a space of the existing ½” wall panel 16” x 8”so that the niche flanges can rest on the 2’ x 4’ studs (16” o.c.) on both sides and line up flush with the surrounding backerboard or drywall panels. 2 Insert the wedi niche into opening. Apply a bead of wedi joint sealant along the outside seam and smooth out with a putty knife to cover and waterproof the seam. Apply a bead of wedi joint sealant onto exposed stud, as well as along inside edges of wall panel. 1 16” x 12” Rectangular Niche Cut out a space of the existing ½” wall panel 16” x 12”so that the niche flanges can rest on the 2’ x 4’ studs (16” o.c.) on both sides and line up flush with the surrounding backerboard or drywall panels. 2 Insert the wedi niche into opening. Apply a bead of wedi joint sealant along the outside seam and smooth out with a putty knife to cover and waterproof the seam. Apply a bead of wedi joint sealant onto exposed stud, as well as along inside edges of wall panel. 1 16” x 16” Square Niche Cut out a space of the existing ½” wall panel 16” x 16”so that the niche flanges can rest on the 2’ x 4’ studs (16” o.c.) on both sides and line up flush with the surrounding backerboard or drywall panels. 2 Insert the wedi niche into opening. Apply a bead of wedi joint sealant along the outside seam and smooth out with a putty knife to cover and waterproof the seam. Apply a bead of wedi joint sealant onto exposed stud, as well as along inside edges of wall panel. 6 Technical Data: wedi® Shower Accessories 1 16” x 22” Rectangular Niche Cut out a space of the existing ½” wall panel 16” x 22”so that the niche flanges can rest on the 2’ x 4’ studs (16” o.c.) on both sides and line up flush with the surrounding backerboard or drywall panels. 2 Insert the wedi niche into opening. Apply a bead of wedi joint sealant along the outside seam and smooth out with a putty knife to cover and waterproof the seam. Apply a bead of wedi joint sealant onto exposed stud, as well as along inside edges of wall panel. 1 Cut out a space of the existing ½” wall panel 16” x 42”so that the niche flanges can rest on the 2’ x 4’ studs (16” o.c.) on both sides and line up flush with the surrounding backerboard or drywall panels. 16” x 42” Lean Combo Niche 2 Insert the wedi niche into opening. Apply a bead of wedi joint sealant along the outside seam and smooth out with a putty knife to cover and waterproof the seam. Apply a bead of wedi joint sealant onto exposed stud, as well as along inside edges of wall panel. 7 Technical Data: wedi® Shower Accessories National Building Code Compliances Compliance with current ICC Evaluation Service standards ICC-ES PMG Listing www.icc-es-pmg.org | (800) 423-6587 | (562) 699-0543 CSI: PMG-1189 Effective Date: May 1, 2013 This listing is subject to re-examination in one year. A Subsidiary of the International Code Council® DIVISION: 22 00 00—PLUMBING Section: 22 40 00—Plumbing Fixtures (Shower System Kit) Product certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier’s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier’s quality system. Product: wedi Fundo Shower System and Tile Backer Board Underlayments Listee: wedi Corporation 1100 Landmeier Rd. Suite 200 Elk Grove Village, Illinois 60007 www.wedicorp.com port on Find Current Re .org es cwww.ic Compliance with the following codes: 2012 and 2009 International Plumbing Code® (IPC) 2012 and 2009 International Residential Code® (IRC) 2012 and 2009 Uniform Plumbing Code® (UPC)* *Uniform Plumbing Code is a copyrighted publication if the International Association of Plumbing and Mechanical Officials Compliance pliance with the following standard: ANSI A118.10-2008, Load Bearing, Bonded, Waterproof Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations Dim mensio on Ston o e In on Install lat a ions ICC-ES ICC--ES S EG G 159, 159 59,, Evaluation 59 E alu Ev ua atition o Guideline for Composite Backer Board ICC-ES ICC--ES S AC C 71, Acceptance Accceptance Criteria for f r Foam Plastic Sheathing Panels Used as Water Resistive fo Res Barriers Barrrierrs rs IAPMO IAPM MO PS 46-2012, 46-2 2012 1 , Field-Fabricated F eld Fi d-Fab briicatted d Tiling Tililin in ng Kits Kits s Identification: ification: Packaging each system include manufacturer’s name trademark the Pa ack ckag aging label for eac ag ch syste em shall includ de th the em anu nufa facturrer’s nam fa am me or trad ademark as well as th ad ICC-ES certification IC CC-E ES PMG certificatio iio on mark. marrk. Installation: llation: Th he wedi Fundo Fundo Shower Sho ower Systems Sy yst stem ems shall em sha sh hall be be installed in a cord ac dance with the e manufacturer’s ma anufacturer’s published publi The in accordance instructions and applicable code(s). instrructions a n the nd e ap appl pllicab able l co cod de(s (s)). Shower system components shall be assembled and can be customized in the field. All shower bases and panels can be cut to size with hand saws or skill saws. Round curvy cuts can be made with a hand saw or jig saw. When provided drains must comply with ASME A112.18.2 as applicable. The wedi pre-sloped, ready-to-tile shower bases may be used in lieu of an ANSI Z124.1.2 plastic shower receptors or any liner based shower installations. The wedi drain units do not require weep holes. Models: The wedi Fundo shower bases are pre-sloped, ready-to-tile floor units. The wedi building panels are engineered as a general purpose backer board and underlayment for tile and consist of a rigid extruded polystyrene foam covered on both sides with a cement-based resin surface and reinforcing mesh for durability and bonding with any type of thinset mortar. The systems linear drain is integrated and factory sealed into the floor base. System assembly and wedi components were proven to be waterproof and mold resistant when tested in accordance with A118.10-2008. Shower system may include the following components: shower base, building panels, curbs, niches, seats, benches, ramps, vapor barrier, fasteners, cover plates, sealants and drain. The wedi Fundo family line includes the following: Primo, Riolito, Riofino, Discreto, and ECOBATH. Conditions of Listing: 1. The wedi Fundo Shower Systems shall be installed in accordance with the manufacturer’s published instructions and the applicable code(s). 2. The wedi Fundo Shower Systems are manufactured by wedi GmbH, in Emsdetten, Germany under a quality control program with annual surveillance inspections by ICC-ES. Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright © 2013 Page 1 of 1 8 Technical Data: wedi® Shower Accessories wedi Prefabricated Curbs and Ramps Available in several options for shower entry designs where transitions are required, wedi curbs and ramps can be installed with wedi Fundo shower bases, as well as conventional mortar bed systems. Waterproof and versatile, wedi Curbs and Ramps may be tiled before any glass doors, panels or glass block is installed and can carry weight of up to 480 lbs./ft. Epoxy glue is recommended instead of screw fasteners when installing shower door tracks. wedi Full Foam Curbs wedi Curb Over wedi Shower Ramp wedi Full Foam Curbs combine it all in one element when compared to traditional methods of 2’ x 4’ wood assembly, lath, mud and waterproofing. They come presloped so water runs back into the shower. Installation instructions can also be found in the wedi Fundo Primo Installation video (www.wedicorp. com) wedi Curb Overs are designed to water-proof over existing 2’ x 4’ wood constructions. A conventional PVC pan liner is sandwiched inside between the 2’ x 4’ and the wedi Curb Over. The wedi Curb Over will provide additional water-proofing and square corners for a perfect tile job. No fasteners should penetrate the curb except on the vertical outside of the shower. Attach with thinset mortar only. Please install curb over in accordance with the TCNA Handbook detail. Installation instructions can also be found in the wedi Curb Over Installation video (www.wedicorp.com) The wedi Shower Ramp is used to create curbless showers without recessing the shower base into the subfloor. The ramp provides a 1”slope over a 12” length and meets ADA requirements. The ramp should not be tiled with tiles smaller than 4” x 4” when wheelchairs are used in this shower. Installation instructions can also be found in the wedi Fundo Primo Installation video (www.wedicorp. com) 9 Technical Data: wedi® Shower Accessories General Limitations In commercial applications, adequate fire barrier substrates may need to be installed behind wedi foam products. Follow local and national building codes in all applications. Storage Store flat and keep dry with no exposure to elements. Keep away from solvents and direct UV exposure. Disposal Product can be disposed with attached construction material/waste. Product will not negatively impact ground water. Product cannot decompose. Warranty Log onto www.wedicorp.com to learn more about wedi’s warranty. MasterFormat™ 2004 Sections Section 07100: Damp-proofing & Waterproofing Section 09260: Gypsum Board Assemblies Section 09252: Cementitious backer board Section 09300: Tile 10 Technical Data: wedi® Shower Accessories Product Order Information wedi® Shower Seat M&L Description Width x Length x Height Unit Item # wedi Seat M 17” x 17” (wall sides) x 4” 1 pc 07-37-84/300 wedi Seat L 5” x 8’ x 4 1/2” 1 pc 07-37-84/400 wedi Bench | Rectangular and Full Foam Triangle Seats Description Width x Length x Height Unit Item # wedi Bench 16” x 32” x 20”, sloped 1 pc 07-37-84/100 wedi Corner Seat 23” x 23” (wall sides) x 20” 1 pc 07-37-84/101 ft Rectangular bench made with 2” wedi® Building Panel, full; foam seat made of solid XPS foam. These units are pre-made and ready for thinset installation against walls and feature and 1/8” slope to the front. $ wedi Niche | Square Edges 16” x 16” Description Dimensions Unit Item # wedi Niche Square Edges 16” x 8” 1 pc 07-43-15/200 wedi Niche Square Edges 16” x 12” 1 pc 07-43-15/250 wedi Niche Square Edges 16” x 16” 1 pc 07-43-15/300 wedi Niche Square Edges 16” x 22” incl. removable shelf 1 pc 07-43-15/400 wedi Lean Combo Niche 16” x 42” incl. 2 removable shelves 1 pc 07-43-15/350 ft Installation over 2” x 4”’s construction, 16” o.c. framework 16” x 42” $ 16” x 22” ft Important information Please noteft ft ft Scope of delivery Options ft Tileable surfaces 11 $ $ $ $ $ Technical Data: wedi Shower Accessories wedi Curb Over Description Width x Length x Height Unit Item # wedi Curb Over Square Edges 5” x 5’ x 4 1/2” 1 pc 07-43-17/000 wedi Curb Over Square Edges 5” x 8’ x 4 1/2” 1 pc 07-43-18/000 Installation over 2” x 4” construction. No fasteners should penetrate the curb, except on the vertical outside of the shower. ft $ wedi Full Foam Curb Description Width x Length x Height Unit Item # wedi Curb Full Foam Square Edges 5” x 5’ x 4 1/2” 1 pc 07-43-19/002 wedi Curb Full Foam Square Edges 5” x 8’ x 4 1/2” 1 pc 07-43-19/001 Description Width x Length x Height Unit Item # wedi Shower Ramp* 12” x 5’, sloped 1 1/2” to 1/4” 1 pc 07-37-36/517 wedi Shower Ramp* 8” x 6’, sloped 1 1/2” to 1/4” 1 pc 07-37-35/517 Sloped fton top surface $ wedi Shower Ramps *ADAftcompliant $ ft Important information $ Please noteft ft ft Scope of delivery $ $ Options $ ft Tileable surfaces $ Contact us: [email protected] Be sure to ask for a Certified wedi Installer. wedi corporation 1100 Landmeier Rd. Ste. 200 Elk Grove Village, IL 60007 Tel.: +877 933 WEDI (9334) Fax: +847 357 9819 Find wedi products & specs: www.arcat.com 05/13 Diese Zeichnung / Skizze ist Eigentum der wedi GmbH und unterliegt dem Urheberrecht. Die Verwendung bedarf in jedem Fall der vorherigen, schriftlichen Zustimmung der wedi GmbH this drawing and its copyrights are owned by wedi GmbH.