drum handling

DRUM HANDLING
DRUM-MATE® AIR OPERATED DRUM PUMP
ECONOMICAL DRUM DISPENSING
FEATURES
• Safe for most nonflammable liquids
• Air Operated, 4-7.5 PSI, 7-12 CFM
• Virtually maintenance free - no moving parts
• Corrosion proof - all polypropylene plastic
• Rated continuous run, wet or dry
• Silent operation
• Built-in automatic safety air vent
• Easy-to-use 4 position rotating control head
• Self-priming, dispensing up to 15 ft. high
• Not for use in explosive environments
• Kit includes all hoses & fittings.
• Extensive accessory line
APPLICATIONS
Excellent for drum dispensing of most nonflammable liquids compatible with
polypropylene including:
Paints
Coatings
Plating Solutions
Adhesives
Cleaners
Inks & Dyes
Chemicals
Photo Chemicals
Coolants
Solvents
Miscible Oils
Lubricants
Acids
Caustics
Brine
Tanning Solutions
Slurries
Etc.
OPERATION AND SPECIFICATIONS
This unique, 2 inch (50mm) bunghole mounting, polypropylene drum pump dispenses
up to 16 GPM (60 LPM), up to 250 centipoise, 50 SAE, 1200 SSU, (medium thickness) by gently pressurizing the drum to 7-1/2 PSI from any air source up to 150
PSI. An internal air safety valve automatically vents any excess air from 7.5 - 150
PSI. Air wastage can be eliminated with the Model DM-85APR (Cat# DH-0514)
Air Regulator accessory. The state-of-the-art design offers high quality, safe and
simple operation, low unit cost, long operating life, minimal air usage and virtually
maintenance free operation. For easy hand dispensing request the drum dispensing
nozzle (DH-DM-85HFR 1/2", 3/4" (Standard) or 1").
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478
1
DRUM HANDLING
SAFETY DRUM PUMP STANDARD KIT
Shown with Nozzle and Air Pressure
Regulator (Not Included)
Features:
•
•
•
•
•
•
•
•
All polypropylene wetted parts
2” (50mm) bunghole mounting
air operated
maintenance free
corrosion proof
self-priming
rated continuous run
dry run without damage
Max. Operating Conditions:
• Flow rate 16 gpm (60 Lpm)
• Max. Viscosity. Medium
thickness (250 cps. 1,200 SSU.
50 SAE)
• Maximum Head: 15 ft. (4.5m)
• Temperature Range:
18° to 155°F (-4° to +68°C)
• Max. Air input: 150 psi (1050 kPa)
Kit Contents:
1) Pump module, 2) Viton bung o-ring, 3) Pickup tube, 35” x 3/4” ID, polypropylene (PP), 4)
3/4” tube connector (PP), 5) Flexible dispensing hose, 3 ft x 3/4” ID, PP, with clamp, 6) Air
connector hose, 1/3 ft length x 1/4” NPT.
Suggested Optional Accessories: • DM-85APR
(Cat.# DH-0514) air pressure mini-regulator
• DM-85HFR/SV34 (Cat.# DH-0512) hand
dispensing nozzle, 3/4”
Function: for dispensing
non-flammable liquids of all kinds
including paints, coatings,adhesives,
solvents, corrosives,cleaners, acids,
oils, coolants, chemicals,
dyes, inks, tanning solutions, plating
solutions, etc.
PRICE
DH-0501 85DGP Safety Drum Pump Standard Kit, 3/4”........$132.00
Replacement Hose
DH-0518
85CDH Flexible Poly Dispensing Hose
3/4" ID x 3' L with clamp....................................................21.00
DH-0521
85FCN Spray ‘n’ Pour Flow Control Nozzle...........................45.00
Drum Pump Accessory (for series 85DGP)
2
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478
DRUM HANDLING
OPTIONAL ACCESSORIES
HIGH FLOW DISPENSING NOZZLE
FeaturesFunction:
• Polypropylene body
• Internal 316 stainless
steel spring
• Viton parts
Attaches to drum pump dispensing
hose; simplifies dispensing and
increases operator efficiency.
Max. Operating Conditions:
• 150 psi (1050 kPa)
• 40 gpm (181 Lpm)
• Nozzle length: 5” (114 mm)
• Hose Barb Sizes:1/2” (12.7mm),
3/4” (19.05)(Std for DH-0501), 1.0” (25.4mm)
DH-0511
85 HFR HIGH Flow Dispensing Nozzle(1/2" hose barb)
economy model, internal 316ss return spring............... $71.00
DH-0512
Same as above with 3/4" hose barb............................... 71.00
DH-0513
Same as above with 1" hose barb.................................. 71.00
DH-0581
85 HFR/RKV (Viton) Maintenance Kit.............................. 34.00
DH-0582
85 HFR/RKE (EPDM) Maintenance Kit.............................. 41.00
Also available with hastelloy parts
Food grade sanitary duty hand dispensing nozzle also available- Please
Call for Pricing
HEAVY DUTY DISPENSING NOZZLE
Max. Operating
Conditions:
Features:
• 40 psi (280 kPa)
• 8.0 gpm (36.4 Lpm)
• Nozzle length: 2” (50mm)
• Hose Barb sizes:
• 1/2" (12.7mm)
• 3/4” (19.05 mm)
• 1.0” (25.4 mm)
DH-0515
• All polypropylene construction
• External spring
• Viton seal
• Auto Shutoff Trigger
Function:
For precise liquid pouring. Provides precise
dispensing control with minimum residual
runoff from nozzle.
100 HFR Heavy Duty Dispensing Nozzle (1/2" hose barb),.....
economy model, external 316ss return spring..........$255.00
Same as above with 3/4" hose barb............................255.00
Same as above with 1" hose barb...............................255.00
100HFR/SKV Maintenance kit (Viton), 4 Pak..................56.00
DH-0516
DH-0517
DH-0585
AIR PRESSURE MINI REGULATOR
(for DM-85DGP Pump)
Features:
Max. operating
• 0-15 psi (0-150 kPa) air gauge
conditions:
• Locking psi calibration knob
• 300 psi (2100 kPa)
• Diaphragm operated • 175°F (79°C)
Function: Prevents pump’s built-in automatic safety valve from
venting excess air input when preset at 7.5 psi (52.5 kPa) pressure.
DH-0514
85APR Air Pressure Mini Regulator........................... $88.00
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478
3
DRUM HANDLING
DRUM BUNG-HOLE ACCESSORIES
Mauser Converter
DH-0524 55BCF/M Mauser coarse ThreadConverter™
Thread Conversion: Converts Mauser coarse bung thread to
2" NPT thread. (3" dia. x 1-3/4" high)
Material of Construction: HDPE (high density
polyethylene)w/EPR O-ring (ethylene propylene rubber)
Benefits: Permits use of DM-85DGP drum pump, and other
plastic drum pumps, drum mixers and drum processing
equipment to be mounted onto drums, IBC's or other
containers with Mauser threads.....................................30.00
Buttress Converter
DH-0526 55BCF/B Buttress coarse ThreadConverter™
Thread Conversion: Converts Buttress coarse bung thread to ...
2" NPT thread. (3" dia. x 1-5/16" high)
Material of Construction: HDPE (high density polyethylene)
Benefits: Permits use of DM-85DGP drum pump, and other
plastic drum pumps, drum mixers and drum processing
equipment to be mounted onto drums, IBC's or other
containers with Buttress threads....................................24.00
ThreadGuard™
DH-0528 55BTG Bung ThreadGuard™ Flange
Thread Size: 2" NPT to 2" NPT thread
Material of Construction: Zinc plated steel
Benefits: Protects threads of plastic drum processing equipment from cross threading or wearing down due to constant use . in steel bung-holes. Equipment can be permanently mounted onto .
the ThreadGuard™ for use in any drum, Tote or IBC (Intermediate
Bulk Container) or tank with 2" bungholes......................... 38.00
PLEASE CALL FOR CURRENT PRICING !
All prices are subject to change without notice.
Manufacturers prices fluctuate throughout the
year. By the time the catalog is compiled and
sent to press, many of our published prices
have changed. We urge all customers to call
for current pricing.
4
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478
DRUM HANDLING
The BungVent™
Maximum Drum Safety for Operators & the Environment
For 2” Npt Bungs of Drums, IBCs and Tanks
•
•
•
•
•
•
•
Groundable, with Built-in Flame Arrestor
Reversible - for pressure or vacuum venting
Manual, continuous venting Vacuum Relief Control
High Chemical Resistance: 316ss, Viton
Horizontal, Low Profile mounting
Pressure Relief Limit: 5 Psi
Optional 3/4” Bung Adapter available
This top-quality, heavy duty, 2” Npt bung mounting vent permits metal or plastic drums and storage
containers to maintain a storage pressure under 5 Psi. Containers of volatile solvents, flammables or
liquids that evaporate require venting to relieve pressure build-up which usually occurs due to heat or
drum movement agitation. Vacuum pressure can also happen when liquid is being drained off, or the
drum is subjected to sudden cooling. If too much expansive pressure or contracting vacuum pressure
exists, it can cause failure of the container including container seam-splitting, explosive rupture, cave-in
or collapse.
The BungVent is used to prevent container damage from pressure build-up, where drum leakage can
be catastrophic, creating hazards such as flames, an explosion which can cause injury or death to an
Operator and subsequent environmental damage or contamination, and if the stored liquid is a HazMat,
a possible costly cleanup.
A knurled vacuum pressure relief adjustment knob, allows manual control for continuous vacuum relief
during drum, IBC or tank transfer or discharging applications. When transfer is complete, closing the
knob permits the pressure vent function to continue to blow off pressure build-up when it reaches the 5
Psi pressure relief preset. A special vacuum lock-tab rotates into the knob grip to prevent the vacuum
relief from being accidentally opened.
Stainless Steel BungVent™
2” or 3/4” Npt, horizontal-low profile vent, incorporates reversible pressure or vacuum venting with
manual vacuum relief control for constant vacuum release during continuous pump transfer operation.
Excellent for any liquid compatible or 316 stainless steel and Viton including corrosives, solvents,
chemicals, fuels, etc.
•
•
•
•
•
Built-in flame arrestor
Vacuum release knob permits continuous venting
Pressure Relief Limit: 5 Psi
MOC’s: 316ss, Viton,
Also adaptable to fit 3/4” Bungholes and metric, coarse threaded bung holes
using 3/4” bung Adapter Set.
DH-054010
DH-054041
Stainless Steel BungVent......................................................................$325.00
3/4” Bung Adapter Set, 316 SS..............................................................115.00
Paul N. Gardner Co., Inc. • www.gardco.com • (954) 946-9454 • 1-800-762-2478
5