32078 Honda Txt

32078 Honda Cvr
10/6/08
3:10 PM
Page 1
P RO V E N
H o n d a
M a r i n e
2 0 09
32078 Honda Cvr
10/6/08
3:10 PM
Page 2
Solid reliability that’ll move you over a liquid world.
Honda CBR
Honda BF225
Honda Advanced Robotics, Asimo
Honda FCX Hydrogen Fuel Cell Vehicle
Honda Jet
The Honda name is legendary. With engines forged and tested on racetracks and
stroke. So, it’s little wonder that we just received the NMMA CSI Award for
roadways around the globe, Honda is the world’s largest engine manufacturer.
Excellence in Customer Satisfaction for the fifth year in a row.
But the world is two-thirds water. So it only makes sense to trust that same
leadership and attention to detail when terra firma dissolves into waves of escape.
As you know, Honda four-stroke engines run quieter, offer greater fuel economy,
burn cleaner and are just plain better for the environment. So, when you’re
Honda offers more four-stroke marine experience than anyone, with engines
buying a new boat or repowering your current one, remember Honda was there
inspired by our automotive technology and conceived for water from the ground
from the beginning. Consider the experience that’ll take you over the water with
up. For over 40 years we’ve been tireless in applying advanced thinking to our
whisper stealth, solid reliability, the best standard non-declining warranty and
marine engines and challenging the rest of the industry to keep up.
engine exclusives that no one else offers.
We were the first to offer a full line of dependable four-strokes. The first to offer
a non-declining 5-year limited warranty. The first four-stroke to meet and exceed
both EPA and CARB emission standards. The first to introduce the 225 HP four-
That’s today’s Honda:
P ROV E N
32078 Honda Txt
10/6/08
3:51 PM
Page 1
World Cat 270TE/Honda BF225s
1
32078 Honda Txt
10/6/08
3:51 PM
Page 2
Honda. A history of leadership.
1964 First Honda four-stroke outboard introduced.
1967 First Honda outboard introduced in the U.S.
1985 Honda has the first full line of four-strokes for customers to choose from.
1990 Our BF45 wins the IMTEC Innovation Award.
1994 Our BF90 prototype wins the IMTEC Innovation Award.
1995 The BF90 wins Popular Mechanics “Design and Engineering Award.”
1998 Honda Marine is the only marine engine manufacturer offering over
15 models of four-strokes to choose from.
2001 The world’s first 225 HP four-stroke is introduced. VTEC™ Technology
is also introduced in a marine engine.
2002 Hundreds of BF225s are put into service for the U.S. Coast Guard’s Homeland
Security Initative.
2004 Our BF150 is introduced.We also received the NMMA’s Customer Service Award.
2005 For the second consecutive year, Honda wins the NMMA’s Customer Service
Award and is ranked highest in customer satisfaction with four-stroke
engines in a tie by J.D. Power and Associates. Every model in our lineup
continues to meet or exceed Environmental Protection Agency (EPA)
standards and carries a California Air Resources Board (CARB) 2008 3-star rating.
2006 The all new BF90 and BF75 are introduced with Multi-Port Electronic Fuel
Injection and are the lightest four-strokes in their class. For the second time
in a row, Honda receives a customer satisfaction award for four-stroke outboards
from J.D. Power and Associates and the CSI Industry Award from the NMMA.
2007 Honda ranks highest in customer satisfaction for four-stroke outboards
according to J.D. Power and Associates.
2008 The redesigned BF40 and BF50 EFI are introduced and are, by far,
the best in their class. For the fifth consecutive year, Honda Marine
wins the CSI Award for customer satisfaction.
32078 Honda Txt
10/6/08
3:51 PM
Page 3
Andros Cuda23/Honda BF225
3
32078 Honda Txt
10/6/08
3:51 PM
Page 4
Sometimes the best things about a legend are the facts.
Honda’s True 5 Limited Warranty
NMMA CSI Award
Environmentally Responsible
It’s the best warranty in the business. It is not a
3rd party “extended service” contract. There is a
legally defined difference. This transferable five year
factory-direct, non-declining warranty is the same
on the first day as it is on the last. When you buy any new
Honda 2 to 225 HP outboard you get a true warranty
straight from Honda, with no strings attached. With
service available at over one thousand Honda
Marine Dealers nationwide, you can’t go wrong.
After all, isn’t this what you expect from Honda?
The National Marine Manufacturer’s Association
awarded Honda its coveted CSI Award for Excellence
in Customer Satisfaction for the fifth straight year.
This is a rating of 90% or higher in customer
satisfaction based on information provided by more
than 50,000 consumers who have purchased a new
boat or engine.
Today, everybody’s making four-strokes or some
variation of a cleaner burning engine. But for over
40 years, four-strokes are all Honda has made, and
we’re the only major marine engine manufacturer
who can say so. We’ve always known that four-strokes
reduce noise, smoke less, use less fuel and are better
for the environment. All of our engines exceed the
highest CARB 3-Star rating to meet the rigorous
California Air Resource Board’s standards for 2008.
32078 Honda Txt
10/6/08
3:51 PM
Page 5
The Honda Story
Smoker Craft 172 Ultima/Honda BF90
5
32078 Honda Txt
10/6/08
3:51 PM
Page 6
Look for these fine boats powered by Honda.
A Honda outboard enhances any
boat. But if you’re in the market
for a new boat, we recommend
these manufacturers. Many come
fully rigged with Honda engines,
props and gauges to ensure
your quality time on the water.
For more information on our
boatbuilder partners, go to
honda-marine.com, click on
Why Choose Honda and then
Boatbuilder Partners for their
newest models.
AKSANO
ALOHA
ALUMA MARINE
ALUMACRAFT
ALUMAWELD
AMERICAN SKIFF
APEX
AQUA PATIO
ARIMA
ATEC
BRISTOL HARBOR
JAVELIN
PALM BEACH
SMOKER CRAFT
BULLFROG
JC MANUFACTURING
PALMER
SOUTH BAY
CARIBE
JUDGE YACHTS
PERMARKC
STARCRAFT
CAROLINA SKIFF
KAYOT
PIONEER
STEIGER CRAFT
C-DORY
KENCRAFT
PLAY CRAFT
STRATOS
C-HAWK
KENNER
POLAR
SUNDANCE
COUGAR
KEY WEST
POLAR KRAFT
SUNDANCER
CREST
KLAMATH
POND KING
SUNSET BAY
CRESTLINER
LAKE ASSAULT
PREMIER
SUNTOON
CUSTOM WELD
LANDAU
PRO SPORTS
SWEETWATER
DESTINATION YACHTS
LEISURE KRAFT
PROGATOR
SYLVAN
DURACRAFT
LIFETYME
PRO-LINE
TAHOE
DARGEL
LUND
PROLINE NEW WATER
DUROBOAT
MAKO
RAIDER
TEAM PERSUASION
BOATS
EAST CAPE CANOES
MANITOU
RANGER
EVANS
MARINE
MANUFACTURING, INC.
RIBCRAFT
EVERGLADES
EVOLUTION
FARALLON
FLATS CAT
GILGETTER
GLACIER BAY
GODFREY
MARITIME SKIFF
MCKEE CRAFT
MIRROCRAFT
ROOKIE
SAFE BOATS
TRADITION
TRANS FIBERGLASS
TRITON
TRITOON
TRIUMPH
MISTY HARBOR
SAILABRATION
HOUSEBOATS
MUNSON
SALT SHAKER
VOYAGER
NAUTIC STAR
SAN PAN
WACO
NAUTICA
SCOUT
WARRIOR
NEPTOON
SCULLY’S
ALUMINUM BOATS
WEERES
AVALON
GRAVOIS
ALUMINUM BOATS
BAYMASTER
GREGOR
NICHOLS
BEACHCOMBER
HARRIS FLOTEBOAT
NOMAD HOUSEBOATS
BENNINGTON
HEWESCRAFT
NORTHWEST JET BOATS
BLUE WAVE
HOLBY
NOVURANIA
HURRICANE
PACIFIC
BOULTON
ROBALO
TMC
SEA ARROW
SEA CHASER
SEAARK
SEAARK MARINE
SEASWIRL
TUFF BOAT
WELDCRAFT
WILLARD MARINE
WOOLDRIDGE
WORLD CAT
ZODIAC
32078 Honda Txt
10/6/08
3:51 PM
Page 7
7
32078 Honda Txt
10/6/08
3:51 PM
Page 8
Our best salespeople are our customers.
“If Honda’s 225s are good enough for the
U.S. Coast Guard to run for thousands of hours,
they’re certainly good enough for my bass boat.”
— Charlie Ingram
Producer & Host, Fishing University TV Show
“For my TV series, I fish a lot of big water – like
Lake of the Woods for Walleye & Musky or Lake
Superior for Trout & Salmon. My 225 Honda
trolls all day & when the day ends it gets me
back – fast. Safe & Sound!”
— Butch Furtman
Producer & Host, Sportsman’s Journal/Notebook
“With the concern of high fuel prices these days,
my Honda 4-stroke enables me to concentrate
on my fishing and not on fuel expenses. I’m also
conscientious about the environment and I know
my Honda is clean and quiet – even at full throttle
I’m not waking up lake residents at daybreak.”
“Day after day on the water I depend on my
Honda outboards to get me and my clients to the
fish and back, without concern of breakdowns.”
— Capt. Chad Breland
Redfish Cup Professional Angler &
Charter Captain
— Jo Dee Lake
Women’s Bassmaster Tour Professional Angler
“For as long as I’ve been cleaning up America’s
rivers, I’ve used nothing but Honda engines.
I know they’ll keep running as long as I keep
running.”
— Chad Pregracke
President & Founder, Living Lands & Waters
Environmental Organization
“When you have an entire television production
team on the line, I need a motor I can depend on.”
— Ronnie Kovach
Producer & Host, Fishing Ventures TV Show
“Eight years and counting…hundreds of tournaments
across the United States…miles and miles of
running…and not one engine malfunction.
Name another outboard with this record.
The Honda will always return!”
— Capt. Ray Brazier
Bassmaster Tour Professional Angler &
Marine Industry Consultant
“If you want proof that Honda Outboards are
the most reliable, efficient and hardest working
motors on the market, how about 1,680 days
on the water without one breakdown.”
— Capt. Charlie Thomason
Redfish Cup All-Star Champion &
Charter Captain
32078 Honda Txt
10/6/08
3:51 PM
Page 9
Caimen East Cape/Honda BF50
9
32078 Honda Txt
10/6/08
3:51 PM
Page 10
Experience begets innovation. Not to mention peace of mind.
Just from a glance at their sleek
aerodynamic lines, you can see that
Honda outboards don’t look like
Check out the following illustration to
better understand the smart thinking
behind VTEC:
BLAST™
anything else out there. As attractive
as they are, however, it’s what’s on the
inside that counts.
SYNCHRONIZING
PISTON
As you review these features, look for
the word “Exclusive.” It means that
HIGH SPEED
LOW SPEED
you won’t find that particular feature
VTEC uses two cam lobe profiles to
anywhere else.
VTEC™ Technology
HIGH SPEED
LOW SPEED
LOW SPEED
EXCLUSIVE
Smooth Acceleration and Power.
Honda’s Variable Valve Timing & Lift
Electronic Control (VTEC) system
gives you a broader, flatter torque
curve and smooth power delivery
operate the intake valves. The low-lift,
short duration cam lobes (shown in
red) provide strong torque at low rpm.
High rpm horsepower is achieved by
engaging the third rocker arm on a
high-lift cam (blue), resulting in a
superior combination of power, torque
and fuel economy. BF225, BF150, BF90.
throughout the engine’s operating
Dual Stage Induction
performance without sacrificing fuel
Breathing Easier Improves Performance.
economy. It’s all because VTEC varies
Honda’s unique variable intake system
maximizes combustion efficiency for
increased torque and superb fuel
economy. While most four-strokes use
long manifolds to deliver air into the
valves to deliver optimal performance
at both low and high rpm, resulting in
peak performance at all speeds.
Lean Burn Control™
Better Fuel
Economy.
EXCLUSIVE
EXCLUSIVE
AIR/FUEL RATIO
20:1
Fuel
Fuel
18:1
Within
This feature
Cruising
16:1
20%
Range
14:1
increases fuel
12:1
efficiency by
10:1 Air
Air
Conventional Honda
allowing
combustion to
operate on a leaner air-to-fuel mixture.
At cruising speed, Honda engines run on
up to 20% less fuel than other comparably
sized outboards. BF225, BF200, BF150,
(2000-2500 rpm)
range. It means outstanding
the lift and duration of the intake
cylinder head, Honda’s DSI uses a
plenum chamber with twin butterfly
valves to vary the volume and velocity
of air flow. It all adds up to a simple,
compact design that enhances both
low speed drivability and high-speed
performance. BF225, BF200, BF150, BF135.
BF135, BF90, BF75, BF50, BF40.
Boosted Low Speed Torque.
A quick movement of the throttle
control activates the BLAST ™ system,
advancing the ignition curve aggressively.
“Hole Shot” is vastly improved as
more horsepower gets the hull up on
plane quicker. BF90, BF75, BF50, BF40.
4-Front Corrosion Protection EXCLUSIVE
Fights the Elements.
Your Honda will continue to look and
perform like new with our protection
system that includes a patented
double-sealed, multi-layered paint
process, sacrificial anodes, stainless
steel components and waterproof
connectors. All engines.
ACRYLIC RESIN “CLEAR” OVERCOAT
ACRYLIC RESIN METALLIC COATING
EPOXY PRIMER UNDERCOAT
“DOUBLE SEALED” TREATMENT
HONDA ALUMINUM ALLOY
32078 Honda Txt
10/6/08
5:22 PM
Page 11
H o n d a Te c h n o l o g y a n d I n n o v a t i o n
Honda Technology continues on the following pages.
11
32078 Honda Txt
10/6/08
3:51 PM
Page 12
50°
belt-driven alternator (BF225) is the
largest amount of recreational
charging power you can get.
60°
CYLINDER
HEAD
COOLING
CIRCUIT
starter bendix drive from the elements.
The result is solid dependability.
All engines BF75 and larger.
All engines have different amperage.
EXHAUST
MANIFOLD
COOLING
CIRCUIT
CYLINDER
BLOCK
COOLING
CIRCUIT
3-Way Cooling System
EXCLUSIVE
Cool-Running Durability.
Three separate cooling systems keep the
cylinder heads running cooler for longterm durability. BF150, BF135, BF90, BF75.
“On Demand” Alternator
O2/LAF and Knock Sensors
Torsion Dampener
EXCLUSIVE
Improved Handling.
Sometimes called the flywheel, this
component is located near the base of
the powerhead. The design lowers the
center of gravity for improved handling,
hull maneuverability and minimal
vibration. All engines BF75 and larger.
More Charging Power.
Top Mounted
Electronics
Our belt-driven system will make sure
batteries stay charged and electronic
Sealed
Starter
equipment keeps humming. In fact,
Honda’s 90 amp “On Demand”
Torsion
Dampener
70
60
50
48
40
amps
Honda is represented
by the blue line.
Current two-strokes
and competitive
four-strokes are
represented by the
red lines.
Sealed Starter
30
20
10
0
.5
1
2
3
x1000 rpm
4
5
6
Optimum Efficiency.
Our linear air fuel and knock sensors
help determine the correct fuel flow
and ignition curve, enhancing overall
engine operation and efficiency.
EXCLUSIVE
Protection for Long Life.
The starter motor is inverted in a
sealed chamber that protects the
fingertip-starting, PTT switch and
engine alert lamps provide added
safety and convenience.
BF90, BF75, BF50, BF40, BF30, BF25.
BF225, BF200, BF150, BF135, BF90, BF75,
BF50, BF40.
Non-Linear Mounting System
EXCLUSIVE
EXCLUSIVE
Large Displacement V6
EXCLUSIVE
Smoother Operation.
Patented non-linear rubber mounts
provide smoother operation at all
speeds. BF90, BF75, BF50, BF40, BF30, BF25.
Center Mount Tiller Handle EXCLUSIVE
Easier Control.
Available on our smaller HP engines,
Honda’s ergonomically designed
handles minimize driver fatigue and
improve handling. Adjustments for
throttle and steering friction allow for
easier control, convenient up-front shifting,
Powerful and Compact.
Thought by many to be impossible,
the BF225 and BF200 feature a
narrow, balanced
60° design.
Lacking the bulk
and weight of
long intake
runners and
multi-camshafts,
the compact
24-valve SOHC
design offers top performance and
durability. BF225, BF200.
32078 Honda Txt
10/6/08
3:51 PM
Page 13
H o n d a Te c h n o l o g y a n d I n n o v a t i o n
adjusts the air-fuel mixture for quick,
easy starting and warm-up.
Dual Overhead CAM (DOHC)
High Horsepower, Low Maintenance.
A powerful, compact 24-valve DOHC
design creates more valve lift to pull in
more air for increased horsepower.
Low-maintenance design allows easy
adjustment of the rocker arms.
No multiple shims or trial-and-error
adjusting needed. BF150, BF135.
Multi-Port Programmed Fuel Ignition
Powerful Performance.
Honda Multi-Port Programmed Fuel
Injection (PGMFI) delivers the
precise amount of air/fuel to each
cylinder under all operating speeds
and conditions. The result is quick
BF30, BF25, BF20, BF15, BF9.9, BF8.
steering arm, tilt tube and all shafts
to ensure durability and long-term
corrosion resistance.
BF225, BF200, BF150, BF135.
Engine Alert System
Check the particular horsepower
starts, instant throttle response,
powerful performance and low fuel
consumption. BF225, BF200, BF150,
Keeps You Informed.
This feature monitors vital engine
functions and prevents damage by
alerting the driver of overheating, low
oil PSI and over-rev.
BF135, BF115, BF90, BF75, BF50, BF40.
All engines except the BF5 and BF2.
and Honda exclusives.
Autostart Enrichment
Power Thrust Design
Easy Starts.
Just like a fuel injection system,
autostart enrichment automatically
Better Performance.
A special Power Thrust 4-blade prop
creates 60% more thrust in reverse
and 15% more in forward, providing
improved maneuverability and
performance. BF20, BF15, BF9.9, BF8.
FUEL INJECTION
engine you’re interested in for a
complete list of available features
Stainless Steel Components
Corrosion Resistant.
Available on our larger HP engines,
stainless steel components include the
13
32078 Honda Txt
10/6/08
3:51 PM
Page 14
When power and reliability merge, you’ve got a pair of silver bullets.
Even when it comes to dual
mounting, the BF225 and BF200
were designed with your needs in
mind. Either can be mounted on a
standard 26" center-to-center distance.
Meaning, they’ll fit any dual design
boat without expensive transom
modifications. Get the complete
technological story on pages 10 through
13. From bay boats, to walk arounds,
to catamarans, you can depend on
these silver bullets. You can’t beat
their value, either. They’re the best
engineered, best backed outboards
on the market today.
Pro-Line 26 XP/Honda BF225s
Whether you pilot a center console
or cuddy cabin, two of your most
powerful choices for safe returns
from the sea are the Honda BF225
and BF200. Both feature a Large
Displacement 3.5 Litre V6.
It’s an authoritative yet compact 24valve SOHC design without the bulk
and weight of long intake runners
and multi-camshafts. The result is
superior performance, great fuel
economy and durability inspired
by Honda’s world-renowned
automotive engineering excellence.
Then there’s our patented 4-FRONT
Corrosion Protection. It includes
a “Double Sealed” multi-layered
paint process that protects against
the elements. Both engines also
have Fresh Water Flushports
for flushing debris and saltwater
out of the engine to extend life and
maximize performance.
Everglades 210cc/Honda BF225
Features Include: VTEC™ TECHNOLOGY ON BF225 • PGMFI (PROGRAMMED FUEL INJECTION) • DUAL STAGE INDUCTION • ENGINE COMMAND SYSTEM
4-FRONT CORROSION PROTECTION • POWER TRIM AND TILT • LEAN BURN CONTROL • ENGINE ALERT SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:51 PM
Page 15
BF 225 / BF 20 0
SAFE Boats International RB-S/Honda BF225s
15
32078 Honda Txt
10/6/08
3:52 PM
Page 16
A great day on the lake begins with Honda.
Bass fisherman, multi-purpose and
VTEC™ Technology. Our Variable
deck boat owners will appreciate the
Valve Timing & Lift Electronic
powerful possibilities you get with
Control (VTEC) gives you a broader,
the award winning Honda BF225
flatter torque curve and smoother
and BF200. They’re the perfect blend
acceleration and power throughout
of technology and reliability for the
the engine’s operating range.
fresh water enthusiast.
Meaning you get peak performance
Besides the sleek, slim looks that
complement the aesthetics of any
and maximum fuel efficiency
whether you're at low or high rpm.
boat from bowriders to runabouts,
Another Honda exclusive
the BF225 offers Honda’s exclusive
you’ll find on both models is our
Hurricane FunDeck GS 231/Honda BF225
90 amp “On Demand” belt-driven
an important plus on residential
alternator. It delivers 48 amps at
lakes for skiing, fishing or pontoon
1,000 rpm and 60 amps above 2,000
boats. Get all the engine specs on
rpm. It’s a powerhouse providing the
pages 10 through 13. For years
highest capacity available for your
of dependable, fuel-efficient
auxiliary power needs.
satisfaction, nothing beats a Honda.
Of course, with all Honda outboards,
Manitou 24 Legacy/Honda BF225
you also get our legendary quiet,
Features Include: VTEC™ TECHNOLOGY ON BF225 • PGMFI (PROGRAMMED FUEL INJECTION) • DUAL STAGE INDUCTION • ENGINE COMMAND SYSTEM • 4-FRONT CORROSION PROTECTION
POWER TRIM AND TILT • LEAN BURN CONTROL • ENGINE ALERT SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:52 PM
Page 17
BF 225 / BF 20 0
Boulton Seamaster 22/Honda BF225
17
32078 Honda Txt
10/6/08
3:52 PM
Page 18
Endless adventures and performance-designed peace of mind.
throughout the rpm range and
provides up to 20% greater fuel
economy in the cruise mode from 2000
to 4500 rpm.
Remember, all Honda outboards are
super quiet and meet the EPA
standards for 2008, with most models
exceeding standards by 65%.
Plus, all of our current models have
the highest CARB 3-Star rating to
meet the rigorous standards of the
California Air Resources Board.
Maritime Challenger 23/Honda BF150
When you’re chasing horizons,
two choices that deliver optimum
performance and peace of mind are
the Honda BF150 and the BF135.
They’re the choice of center console,
multi-hull and bay boat owners alike.
Both feature Dual Overhead CAM
(DOHC), a mighty yet compact 24-
valve design that creates more valve
lift to pull in more air for increased
horsepower. Low maintenance design
also allows easy adjustment of the
rocker arms. No multiple shims or
trial-and-error adjusting needed.
Fishermen and skiers alike
appreciate Honda’s exclusive
Dual Stage Induction, a variable
air intake manifold that delivers top
performance at every rpm range.
Another Honda exclusive on the
BF150 is our VTEC™ Technology
that provides a superior blend of
power, torque and fuel efficiency.
Both engines offer yet another
exclusive, our Lean Burn Feedback
Control.™ It automatically adjusts the
air-fuel mix according to speed and
load. This maximizes power
Triton 2690 WA/Honda BF150s
Features Include: VTEC™ TECHNOLOGY ON BF150 • LEAN BURN CONTROL • PGMFI (PROGRAMMED FUEL INJECTION) • SEALED STARTER • 4-FRONT CORROSION PROTECTION
FRESH WATER FLUSHING PORT • STAINLESS STEEL COMPONENTS • 3-WAY COOLING SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:52 PM
Page 19
BF 1 5 0 / BF 1 3 5
Glacier Bay 2665 Canyon Runner/Honda BF150s
19
32078 Honda Txt
10/6/08
3:52 PM
Page 20
For Great Lakes or small fishing holes, only one name will do.
Another feature both engines have
that’s perfect for ski, bass and multipurpose boats is our Multi-Port
Programmed Fuel Injection
(PGMFI). It delivers the precise
amount of fuel/air to each cylinder
which helps insure, among other
things, instant throttle response.
You’ll find all technological specs on
pages 10 through 13. One thing’s for
Alumacraft 185/Honda BF150 and BF9.9
Everybody has their favorite stretch
functions and prevents damage by
of fresh water. Some go miles off
alerting the driver of overheating,
shore looking for Walleye, others
low oil PSI, over-rev, water in fuel,
enjoy smaller lakes with friends and
battery condition and other critical
family on a pontoon boat or bowrider.
engine functions.
Whatever your taste, two reliable
workhorses you can always count
on are the Honda BF150 and BF135.
nothing beats the fuel efficiency and
precision standards of Honda.
Both engines also feature Honda’s
exclusive Engine Command
Module. It receives constant input
Both have a long list of impressive
from 18 different sensors to deliver
benefits and features, but the
instant starts, smooth operation,
freshwater captain will especially
muscular performance and excellent
appreciate our Engine Alert System.
fuel efficiency.
It constantly monitors vital engine
sure: when it comes to fresh water,
JC Pontoon 246/Honda BF135
Features Include: VTEC™ TECHNOLOGY ON BF150 • LEAN BURN CONTROL • PGMFI (PROGRAMMED FUEL INJECTION) • SEALED STARTER • 4-FRONT CORROSION PROTECTION
FRESH WATER FLUSHING PORT • STAINLESS STEEL COMPONENTS • 3-WAY COOLING SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:52 PM
Page 21
BF 1 5 0 / BF 1 3 5
Columbia 2018 Fisherman XL/Honda BF150
21
32078 Honda Txt
10/6/08
3:52 PM
Page 22
When you’re entertaining, our silver silence is golden.
thrust to haul or push heavy loads.
The long-stroke design increases
torque output and offers outstanding
overall performance and efficiency.
The BF115 also features Programmed
Electronic Fuel Injection. Four fuel
injectors and a common high-flowthrottle body deliver the precise
amount of air/fuel to each cylinder,
resulting in easy starts, instant throttle
response and superior fuel economy.
Honda’s exclusive Sealed Starter
is yet another BF115 benefit. It puts
the starter motor in a sealed chamber
that protects the starter bendix drive
from the elements, resulting in solid
Premier Pontoon 23/Honda BF115/Power Thrust
dependability.
As if all this weren’t enough,
The BF115 also has our exclusive
the BF115 also offers Top Mounted
Torsion Dampener located near the
Electronics. All critical electrical
base of the powerhead. This design
components, from the alternator to
At 137 cubic inches, it has the
lowers the center of gravity for
the ignition, are mounted near the top
largest displacement in its horsepower
improved handling and hull
of the engine powerhead to stay cool,
category, which provides optimum
maneuverability.
dry and reliable.
Boat owners from pontooners to
the quietest you can buy, but the
fishermen know the importance of a
BF115 is a favorite for those who
powerful, trusted engine. But they also
do a lot of entertaining on the water.
want one that doesn’t overpower the
conversation. It’s well known that all
Honda engines are built to be among
Features Include: PGMFI (PROGRAMMED FUEL INJECTION) • POWER TRIM/TILT • ENGINE ALERT SYSTEM • POSITIVE LUBRICATION • ENGINE COMMAND SYSTEM
FRESH WATER FLUSHPORT • SOHC 4 VALVES PER CYLINDER
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:52 PM
Page 23
BF 1 1 5 Po w e r T h r u s t
Godfrey/Sanpan 2200/Honda BF115/Power Thrust
23
32078 Honda Txt
10/6/08
3:52 PM
Page 24
Quality time ahead with advanced technology behind you.
acceleration, Lean Burn Control™ for
superior fuel efficiency and a 3-Way
Cooling System for long-lasting,
durable performance.
SeaWay 21 Sportsman/Honda BF90
More quality time on the water.
The BF90 and BF75 are the first mid-
It’s what every boat owner wants.
range Honda engines to offer PGMFI.
The BF90 and BF75 are the lightest
Our Multi-Port Electronic Fuel
4-strokes in their class and offer a host
Injection System accurately controls
of technological advancements and
ignition timing during start-up,
Honda exclusives that make our silver
providing optimum overall operation.
truly valuable.
The ultimate benefit is smoother and
On the BF90, you’ll find Honda’s
exclusive VTEC™ Technology. Variable
Valve Timing & Lift Electronic Control
South Bay 922CR/Honda BF90
quieter operation on the water,
Add it all together and you have a
instant throttle response and fuel
pair of engines that are economical,
efficient performance.
efficient and durable — which equals
maximum quality time for you.
professional ready to help with
results in a broader, flatter torque
Both engines also feature Honda
curve and smooth power delivery
exclusives like Boosted Low Speed
And don’t forget, your Honda
answers and service to keep your
throughout the entire rpm range.
Torque (BLAST ) for strong
Marine dealer is a well-versed
boat where it belongs: on the water.
™
Features Include: VTEC™ TECHNOLOGY ON BF90 • NON-LINEAR MOUNTING SYSTEM • 4-FRONT CORROSION PROTECTION SYSTEM • FRESH WATER FLUSHPORT • DIGITAL CD IGNITION
BUILT-IN PITOT TUBE • TILLER MODELS AVAILABLE • TOP MOUNTED ELECTRONICS • SEALED STARTER • TORSION DAMPENER
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:52 PM
Page 25
BF 9 0 / B F 7 5
BF90 & BF75
Multi-Port EFI
Provides precise amounts of air and
fuel to each cylinder, meaning quick
starts, instant throttle response and
low fuel consumption.
Available on the BF90, this Honda
exclusive provides a superior blend
of power, torque and fuel efficiency
at any speed.
It uses an oxygen sensor to
automatically adjust the air/fuel mix
according to speed and load. It can
provide up to 20% greater fuel
economy in the cruise mode from
2000 to 4500 rpm.
BLAST™ stands for Boosted Low
Speed Torque, meaning quick
performance and acceleration
when making hole shots.
3-Way Cooling System
The first individually controlled
cooling system for outboards.
This reduces engine heat and
greatly reduces engine wear.
Action Craft 1720/Honda BF90
25
32078 Honda Txt
10/6/08
3:53 PM
Page 26
Our all new BF40 EFI and BF50 EFI will take you places, like the head of the class.
To say our BF40 and BF50 have been
improved is an understatement.
Reinspired, reinvented is more like it.
The result is the lightest, most
compact engines in their class.
On average, they’re up to 27 pounds
lighter than all engines in their
horsepower class, and because they’re
from Honda, they’re loaded with extras.
Features like BLAST™ (Boosted Low
Speed Torque). It’s activated by a quick
movement of the throttle for vastly
Alumacraft Classic 165/Honda BF40
improved hole shots. This Honda
air-to-fuel mixture. At cruising
exclusive is also available on the BF75
speeds, these engines burn up
and BF90.
to 20% less fuel than comparatively
Then there’s Programmed
Electronic Fuel Injection (PGM-FI)
They’re perfect for pontoon boats or
for easy starts, instant throttle response,
inflatables; fishing boats from bass,
slower trolling speeds, and overall
pike, and walleye to flats and bay boats.
better fuel economy.
Come to think of it, the redesigned
Stretching gas even further is our
Lean Burn Control™ which increases
Smoker Craft 160 Pro Angler/Honda BF50
sized outboards.
fuel economy by allowing a leaner
BF40 and BF50 aren’t just at the
head of the class, they’re in a class
by themselves.
Features Include: BLAST™ • LEAN BURN CONTROL™ • PGM-FI • 4-FRONT CORROSION PROTECTION SYSTEM • BUILT-IN PITOT TUBE
POSITIVE LUBRICATION • POWER TRIM/TILT • NON-LINEAR MOUNTING SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:53 PM
Page 27
BF 5 0 / B F 4 0
Polarkraft 165 Pro Angler/Honda BF50
27
32078 Honda Txt
10/6/08
3:53 PM
Page 28
Brawn doesn’t have to be big. Just reliable.
system, it automatically adjusts
the air/fuel mixture for easy
starting and warm-up.
As you can see, a lot is built
into these brawny but quiet,
reliable engines. Plus, all Honda
outboards are backed by the best
standard warranty you can get.
The end result is more good times
and less worry and stress. If reliability
Honda BF30
For mid and smaller horsepower needs,
3 to 3 Induction System that
there’s plenty of punch in the Honda
provides smooth, quiet operation.
BF30 and BF25. They’re packed with
dependable power, but it’s power you’ll
feel and never hear. That’s because all
Hondas are whisper quiet. So quiet,
we don’t have to put extra dampening
insulation in the cowling like most
manufacturers do.
has a color, it has to be Honda silver.
The BF25/BF30 are also the lightest
engines in their class and come with
a built-in pitot tube that eliminates the
need to drill holes for engine
installation. BF25/BF30 are
a 3-cylinder design available with
Power Trim/Tilt or Gas Assist Tilt
Both engines come with a bevy of
features. Like a Center Mount Tiller
with up-front controls. Then there’s
for shallow running.
Both also feature Autostart
Enrichment. Just like a fuel injection
Polar Kraft 1578WT/Honda BF25
Features Include: 4-FRONT CORROSION PROTECTION SYSTEM • 3-CYLINDER DESIGN • BUILT-IN PITOT TUBE • POSITIVE LUBRICATION
POWER TRIM/TILT • NON-LINEAR MOUNTING SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:53 PM
Page 29
BF 3 0 / B F 2 5
Honda BF30
29
32078 Honda Txt
10/6/08
3:53 PM
Page 30
Portable, fuel efficient and powerful.
For smaller 12- to 16-foot boats,
the Honda BF20 or BF15 are as
convenient as you can get. At just 104
pounds, they’re the first outboards to
weigh less than most conventional
9.9 HP engines. Yet they’re all Honda,
meaning quiet, reliable, fuel efficient
and loaded with features.
Both feature High Output Charging.
With the largest alternator in their
class, you’ll have plenty of power for
all your electronics, even when
trolling. Both also offer Auto Start
AB Ventus 9VL/Honda BF20
Enrichment, to ensure easy starting
Thrust is standard on the BF20, BF15
and quick warm-up.
and BF9.9, and is available on the BF8.
Meanwhile, all four engines are
The BF9.9 and BF8 also offer most
available with Power Thrust
of the features listed for the BF20
Design. The combination of a lower
and BF15, as well as Power Tilt,
2.33:1 gear ratio and the 10" x 6.5"
Up Front Tiller Controls,
power thrust 4-blade propeller
creates 60% more thrust in reverse
Honda BF20
and 15% more in forward. Power
Easy One-Hand Starting and
an Integrated Carrying Handle.
Features Include: FORWARD MOUNTED SHIFT LEVER • SHALLOW WATER DRIVE • 4-FRONT CORROSION PROTECTION • FRESH WATER FLUSH PORT
THREE SHAFT LENGTHS • ENGINE ALERT SYSTEM
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:53 PM
Page 31
B F 2 0 / B F 1 5 / B F 9.9 / B F 8
Caribe L-9/Honda BF9.9
31
32078 Honda Txt
10/6/08
3:53 PM
Page 32
They look good. But they run even better.
You know the old saying about how
the best things come in small packages.
Never was that more true than with
the BF5 and BF2. The BF2, for instance,
is the world’s only four-stroke 2 HP
engine. Both the BF5 and BF2 provide
quiet rides and reliability for small
tenders and canoes, and both are
incredibly lightweight and compact.
Pack ’em for anywhere and they’re
ready to take you everywhere.
The BF5 features a Low Oil
Warning System, a ForwardNeutral-Reverse Gearshift and
Positive Lubrication to ensure longterm durability. The BF2 features a
Forced Air Cooled Engine, meaning
there’s no water pump to worry about
getting clogged when you’re in the
weeds or shallows. It also features
360-degree Swivel Steering for
improved maneuverability in tight
areas. Another BF2 feature is its
Centrifugal Clutch. It maintains a
smooth idle, then, when the throttle is
advanced, it automatically engages the
prop above idle speed. It’s like having
a neutral position. Both the BF5 and
BF2 come with Twist Grip Throttles
for precise control and are backed by
Honda BF2
a 5-year warranty.
Features Include: SHALLOW WATER DRIVE • FOLD-DOWN TILLER HANDLE • FUEL TANK & FUEL HOSE (BF5) • INTEGRAL FUEL TANK (BF2) • TWO SHAFT LENGTHS
EMERGENCY STOP SWITCH • FRONT MOUNT CARRYING HANDLE
(For a complete explanation of features, please refer to the technology section on pages 10-13.)
32078 Honda Txt
10/6/08
3:53 PM
Page 33
BF 5 / B F 2
Old Town Discovery Sport/Honda BF2
33
32078 Honda Txt
10/6/08
3:53 PM
Page 34
Silent and silver, Jet Drive takes you where the props can’t.
10 5 J / 6 5 J J e t D r i v e
Alumaweld/Honda 105Jet*
Sometimes, the big ones aren’t in the
big water. For shallows, streams, white
water rivers and sandbars, Honda’s Jet
Drive engines are perfect where
normal propellers can’t go. Honda
Jet Drive units are a dealer-installed
option available for BF90 and BF150
models. All come with our legendary
fuel efficiency, quietness and reliability.
Some Honda Jet Drive owners even
say their fuel costs have literally been
cut in half!
Features Include: SEALED STARTER • ENGINE ALERT SYSTEM • 4-FRONT CORROSION PROTECTION • PROGRAMMED FUEL INJECTION • ENGINE ALERT SYSTEM
MORE FOUR-STROKE MARINE EXPERIENCE THAN ANYONE.
(For a complete explanation of features, please refer to the technology section on pages 10-13.) * BF65JD/BF105JD available by special order through dealers only.
32078 Honda Txt
10/6/08
3:53 PM
Page 35
Te c h n i c a l S p e c i f i c a t i o n s
Whether it’s air, land or sea, Honda Technology means superior
performance. Race-winning engineering perfected on tracks and
watercourses around the world is built in to every one of our
outboard engines.
Inset Images: Honda-Powered IndyCar, HondaJet, CBR1000RR, Acura ARX
35
32078 Honda Txt
10/6/08
3:53 PM
Page 36
Honda Marine
P ROV E N
LARGE MOTOR SERIES
Type
Displacement
Bore & Stroke
Full Throttle RPM Range
Rated Power
Cooling System
Fuel Delivery
Ignition System
Starting System
Exhaust
Drive
Gear Ratio
Gear Shift
Equipment
Alternator
w/voltage regulator
Propeller
Diameter x Pitch
Power Tilt
Power Trim & Tilt
Gas-Assisted Tilt
Oil Pressure Alert
Temperature Alert
Rev-Limiter
Speedometer Pickup
Dimensions
Overall Width
Recommended
Transom Height
Dry Weight
(Electric start)
(Manual start)
Standard
(S-type)
(L-type)
(X-type)†
(XX-type)
(S-type)
(L-type)
(X-type)
(JD-type)
(XX-type)
BF225
BF200
BF150††
BF135
BF115
4-Stroke SOHC
60° V6
3,471 cc (212 cubic inches)
89 mm x 93 mm (3.5 x 3.7 inches)
5,000-6,000 RPM
225 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
60° V6
3,471 cc (212 cubic inches)
89 mm x 93 mm (3.5 x 3.7 inches)
5,000-6,000 RPM
200 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke DOHC
4 Cylinders/16 Valves
2,354 cc (144 cubic inches)
87 mm x 99 mm (3.4 x 3.9 inches)
5,000-6,000 RPM
150 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke DOHC
4 Cylinders/16 Valves
2,354 cc (144 cubic inches)
87 mm x 99 mm (3.4 x 3.9 inches)
5,000-6,000 RPM
135 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
4 Cylinders/16 Valves
2,254 cc (137 cubic inches)
86 mm x 97 mm (3.4 x 3.8 inches)
5,000-6,000 RPM
115 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
1.86:1
F-N-R
1.86:1
F-N-R
2.14:1
F-N-R
2.14:1
F-N-R
2.00:1
F-N-R
90-Amp (1118 watt)
Optional
-
90-Amp (1118 watt)
Optional
-
51-Amp (632 watt)
Optional
-
51-Amp (632 watt)
Optional
-
40-Amp (504 watt)
Optional
-
NA
Standard
NA
Standard
Standard
Standard
Standard
NA
Standard
NA
Standard
Standard
Standard
Standard
NA
Standard
NA
Standard
Standard
Standard
Standard
NA
Standard
NA
Standard
Standard
Standard
Standard
NA
Standard
NA
Standard
Standard
Standard
Standard
625 mm/24.6 inches
508 mm/20 inches
635 mm/25 inches
762 mm/30 inches
267 kg/589 lbs.
272 kg/599 lbs.
277 kg/610 lbs.
625 mm/24.6 inches
508 mm/20 inches
635 mm/25 inches
762 mm/30 inches
267 kg/589 lbs.
272 kg/599 lbs.
-
580 mm/22.8 inches
508 mm/20 inches
635 mm/25 inches
217 kg/478 lbs.
220 kg/485 lbs.
214 kg/472 lbs.
-
580 mm/22.8 inches
508 mm/20 inches
635 mm/25 inches
217 kg/478 lbs.
220 kg/485 lbs.
-
550 mm/21.7 inches
508 mm/20 inches
635 mm/25 inches
225 kg/496 lbs.
229 kg/505 lbs.
-
CARB 2008 RATING
BF225, BF200, BF150 and BF135 counter rotation models available. ††BF150 and BF90 available in jet-ready models (BF150J = 105 HP, BF90J = 65 HP)
All Honda outboards are power rated with NMMA procedures. Specifications are subject to changes.
†
32078 Honda Txt
10/6/08
3:53 PM
Page 37
Te c h n i c a l S p e c i f i c a t i o n s
MID-RANGE SERIES
BF90 ††
BF75
BF50
BF40
BF30
BF25
4-Stroke SOHC
4 Cylinders/16 Valves
1,496 cc (91.4 cubic inches)
73 mm x 89.4 mm (3.0 x 3.5 inches)
5,300-6,300 RPM
90 HP @ 5,800 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
4 Cylinders/16 Valves
1,496 cc (91.4 cubic inches)
73 mm x 89.4 mm (3.0 x 3.5 inches)
5,000-6,000 RPM
75 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
3 Cylinders/6 Valves
808 cc (49.3 cubic inches)
70 mm x 70 mm (2.8 x 2.8 inches)
5,500-6,000 RPM
50 HP @ 6,000 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
3 Cylinders/6 Valves
808 cc (49.4 cubic inches)
70 mm x 70 mm (2.8 x 2.8 inches)
5,000-6,000 RPM
40 HP @ 5,500 RPM
Water Cooled
Programmed Fuel Injection
MicroComputer Programmed
Electric
Through Hub
4-Stroke SOHC
3 Cylinders/6 Valves
552 cc (33.7 cubic inches)
61 mm x 63 mm (2.4 x 2.5 inches)
5,000-6,000 RPM
30 HP @ 6,000 RPM
Water Cooled
3 Carburetors
PGM-IG
Electric/Recoil
Through Hub
4-Stroke SOHC
3 Cylinders/6 Valves
552 cc (33.7 cubic inches)
61 mm x 63 mm (2.4 x 2.5 inches)
5,000-6,000 RPM
25 HP @ 5,500 RPM
Water Cooled
3 Carburetors
PGM-IG
Electric/Recoil
Through Hub
2.33:1
F-N-R
2.33:1
F-N-R
2.08:1
F-N-R
2.08:1
F-N-R
2.08:1
F-N-R
2.08:1
F-N-R
44-Amp (554 watt)
Optional
-
44-Amp (554 watt)
Optional
-
22-Amp (275 watt)
Optional
-
22-Amp (275 watt)
Optional
-
10-Amp (126 watt)
4-Amp (50 watt)
3-Blade Aluminum
9-7/8 x 12 inches
10-Amp (126 watt)
4-Amp (50 watt)
3-Blade Aluminum
9-1/4 x 12 inches
NA
Standard
NA
Standard
Standard
Standard
Standard
NA
Standard
NA
Standard
Standard
Standard
Standard
Standard
NA
Available
Standard
Standard
Standard
Standard
Standard
NA
Available
Standard
Standard
Standard
Standard
NA
Available
Available
Standard
Standard
Standard
-
NA
Available
Available
Standard
Standard
Standard
-
480 mm/18.9 inches
508 mm/20 inches
635 mm/25 inches
163 kg/359 lbs.
166 kg/365 lbs.
161 kg/354 lbs.
-
480 mm/18.9 inches
508 mm/20 inches
163 kg/359 lbs.
-
372 mm/14.7 inches
508 mm/20 inches
635 mm/25 inches
97 kg/214 lbs.
101 kg/223 lbs.
-
372 mm/14.7 inches
508 mm/20 inches
97 kg/214 lbs.
-
375 mm/14.8 inches
381 mm/15 inches
508 mm/20 inches
70.5 kg/155 lbs.
72.5 kg/160 lbs.
-
375 mm/14.8 inches
381 mm/15 inches
508 mm/20 inches
70.5 kg/155 lbs.
72.5 kg/160 lbs.
-
37
32078 Honda Txt
10/6/08
3:53 PM
Page 38
Honda Marine
P ROV E N
PORTABLE SERIES
Type
Displacement
Bore & Stroke
Full Throttle RPM Range
Rated Power
Cooling System
Fuel Delivery
Ignition System
Starting System
Exhaust
Drive
Gear Ratio
Gear Shift
Equipment
Alternator
w/voltage regulator
Propeller
Diameter x Pitch
Power Tilt
Power Trim & Tilt
Gas-Assisted Tilt
Oil Pressure Alert
Temperature Alert
Rev-Limiter
Speedometer Pickup
Dimensions
Overall Width
Recommended
Transom Height
Dry Weight
(Electric Start)
(Manual Start)
Standard
Power Thrust
(S-type)
(L-type)
(X-type)
(S-type)
(L-type)
(X-type)
BF20
BF15
BF9.9
BF8
BF5
BF2
4-Stroke SOHC
2 Cylinders/4 Valves
350 cc (21.5 cubic inches)
59 mm x 64 mm (2.3 x 2.5 in.)
5,000-6,000 RPM
20 HP @ 5,500 RPM
Water Cooled
1 Carburetor
PGM-IG
Electric/Recoil
Through Hub
4-Stroke SOHC
2 Cylinders/4 Valves
350 cc (21.4 cubic inches)
59 mm x 64 mm (2.3 x 2.5 in.)
4,500-5,500 RPM
15 HP @ 5,000 RPM
Water Cooled
1 Carburetor
PGM-IG
Electric/Recoil
Through Hub
4-Stroke SOHC
2 Cylinders/4 Valves
222 cc (13.5 cubic inches)
58 mm x 42 mm (2.3 x 1.7 in.)
5,000-6,000 RPM
9.9 HP @ 5,500 RPM
Water Cooled
1 Carburetor
PGM-IG
Electric/Recoil
Through Hub
4-Stroke SOHC
2 Cylinder/4 Valves
222 cc (13.5 cubic inches)
58 mm x 42 mm (2.3 x 1.7 in.)
4,500-5,500 RPM
8 HP @ 5,000 RPM
Water Cooled
1 Carburetor
PGM-IG
Electric/Recoil
Through Hub
4-Stroke OHV
1 Cylinder/2 Valves
127 cc (7.8 cubic inches)
60 mm x 45 mm (2.4 x 1.8 in.)
4,500-5,500 RPM
5 HP @ 5,000 RPM
Water Cooled
1 Carburetor
Digital CDI
Recoil
Under Water,
Above Propeller
4-Stroke OHV
1 Cylinder/2 Valves
57 cc (3.4 cubic inches)
45 mm x 36 mm (1.8 x 1.4 in.)
5,000-6,000 RPM
2 HP @ 5,500 RPM
Forced Air
1 Carburetor
Transistorized Pointless
Recoil
Under Water,
Above Propeller
2.08:1
F-N-R
2.08:1
F-N-R
2.33:1
F-N-R
2.33:1
F-N-R
2.08:1
F-N-R
2.40:1
360° Pivot
12-Amp (151 watt)
6-Amp (76 watt)
4-Blade Aluminum
9-1/4 x 10 inches
10 x 7-5/8 inches
Available
NA
Standard
Standard
Standard
-
12-Amp (148 watt)
6-Amp (76 watt)
4-Blade Aluminum
9-1/4 x 10 inches
10 x 7-5/8 inches
Available
NA
Standard
Standard
Standard
-
12-Amp (148 watt)
6-Amp (76 watt)
4-Blade Aluminum
9-1/4 x 8 inches
10 x 6.5 inches
Available
NA
Standard
Standard
Standard
-
12-Amp (148 watt)
6-Amp (76 watt)
4-Blade Aluminum
9-1/4 x 8 inches
10 x 6.5 inches
Available
NA
Standard
Standard
Standard
-
Optional 3-Amp (38 watt)
3-Blade Aluminum
7-7/8 x 7-1/2 inches
NA
NA
NA
Standard
-
3-Blade Plastic
7-1/4 x 7-1/2 inches
NA
NA
NA
-
350 mm/13.8 inches
381 mm/15 inches
508 mm/20 inches
47 kg/104 lbs.
50 kg/110 lbs.
-
350 mm/13.8 inches
381 mm/15 inches
508 mm/20 inches
635 mm/25 inches
47 kg/104 lbs.
50 kg/110 lbs.
52 kg/115 lbs.
345 mm/13.6 inches
381 mm/15 inches
508 mm/20 inches
635 mm/25 inches
42 kg/92 lbs.
44 kg/98 lbs.
48 kg/107 lbs.
345 mm/13.6 inches
381 mm/15 inches
508 mm/20 inches
635 mm/25 inches
42 kg/92 lbs.
44 kg/98 lbs.
48 kg/107 lbs.
340 mm/13.4 inches
381 mm/15 inches
508 mm/20 inches
27 kg/60 lbs.
27.5 kg/61 lbs.
-
280 mm/11 inches
381 mm/15 inches
508 mm/20 inches
12 kg/27 lbs.
12.7 kg/28 lbs.
-
CARB 2008 RATING
All Honda outboards are power rated with NMMA procedures. Specifications are subject to changes.
32078 Honda Txt
10/6/08
3:54 PM
Page 39
Genuine Honda Accessories
Propellers
Instrumentation
Digital Gauges – like 7 gauges in one!
TACH
SPEED
Key Switch Panels
LCD Display
LCD Display
Tach: Max 999 (x10)
Trim Angle: 13 Increments
Hour: Max 999.9
Overheat Warning: Alarm*
Low Oil PSI Warning: Alarm*
Alternator Warning: Alarm
PGMFI Warning: Alarm
Speed: 3-75 (mph)
Fuel Level: 8Increments
Volt: 10.0-16.0V
Trip: Max999.9 (miles)
Fuel Flow: .5-75 (gph)*
Fuel Economy: Max999.9 (mpg)*
Total Fuel: Max999.9 (g)*
Water in Fuel: Alarm
* In addition to the alarm,
the RPM Reduction Circuit engages.
* Fuel Management is computed by ECU,
a more accurate system than the
competitor’s paddle wheel design.
39
32078 Honda Txt
10/6/08
3:54 PM
Page 40
Genuine Honda Accessories
Controls
For complete information on
Honda Parts & Accessories, see
your Honda Marine dealer or
go to hondamarine.com.
Gauges
Control Boxes
Parts
Control Cables
Key Switch Panels
Electric Harnesses
Charging Systems
Fuel System Components
Chemicals
Water Pump Kits
Hardware
Conversion Kits
Chemicals
Propellers
32078 Honda Cvr
10/6/08
3:10 PM
Page 3
Honda Marine Dealers
Silver means more than reliability.
It also means your satisfaction.
When you power up with a Honda behind you, you’re getting more than
a lovingly crafted piece of machinery. You’re also getting the support of over
1,000 Honda Marine Dealers.
Every one of our dealers and staff goes through training and receives refresher
updates on the entire Honda outboard line. Honda Marine authorized dealers
are ready to provide you with the highest level of service and have the equipment
and expertise to help you get the most out of your Honda engine.
Combine this with the best standard non-declining warranty in the outboard
industry and you’ve got a team behind you that is second to none.
41
32078 Honda Cvr
10/6/08
3:10 PM
Page 4
Visit us at
www.hondamarine.com
© 2008 American Honda Motor Co., Inc. Always wear a personal flotation device while boating and read your owner’s manual. M0186