Digital Out - produktinfo.conrad.de

\
$j$+ Digital-XG limits the following functions.
t the
Does not support 4-speakers
(2-speakers output only)
4-speakers mode supports
only WAVE, MIDI output
REAL DOS MODE
X
Use the DOS mode under
Windows
CD-ROM Digital Input
Several CD-ROM drives
doesn’ t support digital output
Samsung, Teat CD-ROM
doesn’ t support Digital-Out
Digital Input
-8OdB(Approximately)
LINE-IN, MIC,
Digital Input
Amplifier
ules.
FADE function
CD
t
No
pore-amplifier
4-speaker FADE
Powered speaker or special
amplif ie-r required
Fade and position of the
front, rear apply to the
game only not for sound
utility like MP3 player.
‘,
<film Contents
1
l.Components&connectorsoftheDigitalXG •*..*...‘***..*?.*~*~~*~5
PI
dc
2. Installation of the SoundTrack Digital XG
1I
l
. ..i
3. Installation of the Windows driier(9598)
5, y~HAy-STATI(‘JN 32
6JAQ
l
l
l
9 .
l
l
l
l
.
l
l
l
l
l
l
9.
. *
l
l
l
.
l
l
l
l
. .*
l
l
l
l
l
l
. . . a8
‘J . a .
l
l
. 012
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..‘.... 45
n
1 I Components & connectors of the Digital XG
1
1I
)
I
Please check the component in the package of the product carefully. If you find that there are any’
damaged component(s) in the package, please contact your local dealer.
1. SoundTrack Digital XG
n
SoundTrack Digital-XG.
SoundTrack Digital-XG board
CD-ROM digital input cable
Installation CD
User’s guide
n
i
SoundTrack Digital-XG with DB
SoundTrack digital-XG board
CD-ROM digital input cable
XG-D/B I
XG-D/B connecting cable(4-pin wire)
Installation CD
User’s guide
missing or’
m
.-F
=
cd
.9-
E
0
4=
-’
--
L
-r
:-s
3. Insert SoundTrack Digital XG to PCI slot.
4. Fix the bracket of SoundTrack Digital XG ard using screw.
7. If your CD-ROM drive support digital output, connect the 2-pin wire cable to between the CD-ROM and CD Digital
In connector of the XG board. Align the white cable to the signal(D) and black cable to the ground(G).
*Most CD-ROM drives such as PANASONIC, SONY, TOSHIBA and Samsung do not support digital output
although it has the digital output connector.
Concerning about the S/PDIF digital output from the CD-ROM, please contact with CD-ROM drive manufacturer.
* In order to use the CD-ROM digital output, refer to the Mixer program part.
8. And turn on your PC for driver installation.
3. Installation of the Windows driver(95/98) I’
.
All functions of the “SoundTrack Digital XG” is optimized in the Windows 98. Turn off the PC power and insert the
SoundTrack Digital XG in the PCI slot of main board. And connect the audio cable of CD-ROM or External Device to
the Sound Card.
1. After installation of the sound card in your system, boot up your computer. The wizard will automatically find the
PCI multimedia Audio Device, and the following message will be show up. Then insert the installation CD provided
into the CD-ROM drive and click “Next”.
3. I
\
-
7.
4. After confirming the message of “YAMAHA DS-XG PCI Audio CODEC” click “nest”.
8.
5. Copying ,driver files.
cc
SC
-.
.-
t
.
5
:
c
I 0-
m
0
(jJ About
Show the driver version.
@j Synthesizer
The Synthesizer Effects option allows you to enable the MIDI synthesizer. Using the MIDI synthesizer, you can
richly enhance the acoustic sound variations with features such as reverberation, chorus and variation.
Simply
I
click on the check-box associated with the desired feature.
The MIDI synthesizer utilizes the Wavetable sound generation method, supports the three command$ompatible
interface modes, and is fully compliant with the XG specification proposed by YAMAHA. Note that the addition of
the optional Sondius-XG will eliminate the use of virtual acoustic sources.
* Sondius-XG (http://www.sondius-xgcom) is a trademark jointly held by Stanford University in the United States
and YAMAHA Corporation.
* GM is a trademark of Association of Musical Electronics Industry (AMEI).
/
* XG is a trademark of Yamaha Corporation.
@ JVlkEcho
The MIC Echo feature applies an echo sound effect to the microphone input and enables changes to the current
Microphone echo. setting status.
@ Digital Out
Use the Digital Output option to set up digital outputs. Note that digital outputs will not effect the volume control
setting configured by the Windows standard Master Volume output. To adjust the volume control for all digital
outputs, you need to use external amplifiers.
Configure the Digital out option when using with the XG-DB I. Do not configure this item who don’t have the XG-DB I
1
0 DOS-BOX
This feature supports’DOS applications running in the Windows DOS-BOX.
@ DirectSound
The DirectSound Hardware Accelerator handles the DirectSound application and minimizes CPU utilization. If the
hardware accelerator and the DirectSound application do not function properly, click the checkbox to correct the
problem (DO NOT click the check-box while the application is running).
0 DirectSound3D
The 3D Sound feature supports the 3D positional stereo audio mode compliant with the Sensaura(tm) technology
developed by Central Research Laboratories Limited.. in England. Selecting this feature enables an invariable and
unchangeable sound experience in an all-positional 360 degrees area using stereo speakers and headphone:lf
the 30 acoustic sound output cannot be routed to stereo speakers or headphone, forced 3D sound output can be
used as an output routing changeover option.
@ Analog Out
Configure the speaker number.
c
1) Analog Out
:ontrol
digital
31
I If the
ct the
lology
le and
lne. If
:an be
(iJ Out channel
2 channel - Check this when using 2speakers.
4 channel - Check this when using 4-speakers. Only DirectSound 3D games support 4-speakers.
Special 4CH - Checking this box enables the surround effect to the MP3 and MIDI files with 4-speakers.
Remarks : Please off ‘Special 4CH’ function when playing games.
Remarks /This function won’t work during the playback. And the Digital XG does not support 4-speakers on the
Line-in, Microphone, Audio CD and Digital inputs.
.2) DirectSound
The Dire&Sound Hardware Accelerator handles the DirectSound application and minimizes CPU utilization. If the
hardware accelerator and the DirectSound application do not function properly, click the check-box to correct the
problem (DO NOT click the check-box while the application is running).
3
(ij Primary Buffer - Game Trouble Shooting
When playing Dire&Sound game noises occur occasionally. Click the check-box to correct the problem (Please
do not click this when you don’t play this game).
0 Secondary Buffer
1) Enable - Checking this box enables the Hardware accelerator.
4
.
.?
i
i-
2) Disable All - Checking this box disables the Hardware accelerator and enables the DirectSound application.
3) Disable 3D - Checking this box follows to disable the 3D Hardware accelerator.
ie
3) DirectSound 3D - 3D Sound mode
The 3D Sound feature supports the 3D positional stereo audio mode compliant with the Sensaura(tm) technology
developed by Central Research Laboratories Limited. in England. Selecting this feature enables an invariable and
unchangeable sound experience in an all-positional 360 degrees area using stereo speakers and headphone. If
the 30 acoustic sound output cannot be routed to stereo speakers or headphone, forced 3D sound output
can be
I
I
,used as an output routing changeover option..
,
* Sensaura is a Central Research Laboratories Limited.
se
@ Headphone
Checking this box will force the 3D sound mode to changeover to optimal for the headphone. Note that the
DirectSound settings for the output routing changeover in 3D sound mode will be ignored.
0 Speakers,
Checking this box will force the 30 sound mode to changeover to optimal for the stereo speakers. Note that the
D,irectSound settings for the output routing changeover in 3D sound mode will be ignored.
@ Application Settings
Checking this box follows the output routing changeover under the DirectSound settings.
@ 4 Channel Speaker
In order to use this function, please check the output channel to 4 channel(4) in the ‘Analog Out’ first.
4) Synthesizer - MIDI cotifiguration
Configure
XG MIDI in the driver. This function applies to the MIDI files(MIDI, SNG, WRK) not WAV and MP3.
‘3
@ Reverb
When selected, the Reverberation option adds a resounding effect to the acoustic sound and provides concert
hall ambience to the echo-back sound.
0 Chorus
The Chorus feature provides a chorale effect to the musical sound.
Q Variation
Variation allows the alteration of ‘sound effects such as distortion and overdrive. Reverberation and Chorus are
also features that can be adjusted using Variation.
.
4
.
..- --. -
-,5
-..-
.--
-
@ SONDIWXG
Unlike the MIDI synthesizer, the Sondius-XG produces acoustic sound outputs by running a virtual simulation of
the actual acoustic instrument operation. The output is thus more real since the Sondius XG does not use the
processed acoustic sound recordings generated by the Wavetable sound generator.
The DS-XG supports a single virtual acoustic sound source by combining the virtual acoustic sound signals with
MIDI data. However, you cannot select the virtual acoustic, sound source using DS-XG unless the optional
Sondius-XG is installed.
The Sondius-XG runs on PCs with Pentium II 233MHz or higher.
.
5
Tt
ec
Nc
Tt
ac
Cj) Enable
When selected, the Enable feature applies the Microphone echo sound effect to the microphone input.
0 Delay Time
The Delay Time function allows you to set a Microphone echo repetitive cycle period. To lengthen the cycle
period, move the slide bar to the right.
I
8 Feedback
The Feedback Gain function allows you to set a Microphone echo duration period. To lengthen the duration
period, move the slide bar to the right.
,I
I
/
,
6) Digital Out
le
Use the Digital Output option to set up digital outputs. Note that digital outputs will not effect the volume control
setting configured by the Windows standard Master Volume output. To adjust the volume control for all digi&J
outputs, you need to use external amplifiers.
Configure the Digital out option when using with the XG-DB I. Do not configure this item who don’t have the XGDBI
)n
I
-.
..-- -.-
(ij OFF
Checking this box eliminates all digital.outputs. Acoustic sound outputs will only playback at analog signal pins.
.
0 ON (Digital ‘Sources Only)
Checking this box enables the wavetable, DirectSound and DOS-compatible acoustic sound output functions at
digital signal pins. External inputs including microphone and line are not provided as outputs at digital signal pins.
The acoustic sound outputs will playback at analog signal pins. Normal microphone echo outputs cannot
playback through the S/PDIF interface mode.
0 ON (All Sources) / Analog out is muted
Checking this box eliminates all analog outputs. Acoustic sound outputs will playback at digital signal pins.
However, acoustic sound inputs from an external source may be muted during recording and/or while Mic echo is
active.
@On (Direct)
Only the digital input source output.
0 On (Dolby Digital)
,’ Outputs with Dolby digital signal type. Check this who are using the external AC-3 Decoder.
@ Dolby Digital Priority
l Remarks : According to the driver version, the following items could not be worked.
! :
x
0
m
ch
0
17
ii
Serial
The External MIDI option produces MIDI data externally through the MPU40 1 -compatible MIDI port,
XG
The XG Synthesizer feature transfers MIDI data to the internal XG synthesizer for producing acoustic sound outputs.
Volume control is adjusted using MIDI with the standard Windows volume control tool.
5. YAMAHA Y-STATION32
The YSTATION32 consists of CD, MIDI, and WAVE players. The WAVE component can record and playback WAV
format files.
There are six components: Power Control, CD, MIDI, WAVE, Multi, and Mixer. They can be arranged in any order,
and it is not necessary for all components to be open all the time.
You can play WAVE and MIDI (.WAV and .MID) files simply by dragging and dropping them from the File Manager.
1, Installation
Inserts the install CD and run the setup.exe in \SOUNDV(G\APP directory.
.
.__ _- .-. - _--. -.
I’
i YSTATION32
Power Control Component
This component manages and launches the other components.
WAVE Component
This component plays and records WAVE format files. The recording source can be
CD(AUX), MIC or LINE.
The window display shows the file name, format, and time.
MIDI Component
This component plays Standard MIDI: Files (SMF).
The window display shows the file name, tempo, and time.
i
CD Component
This component plays audio CDs.
The window display shows the track, title, song name, and time.
MULTICompbnent
This component controls simultaneous playback of the CD, MI DI, and WAVE components.
- MKER Component
This component controls playback and recording of your sound card.
From left to right the buttons are:
Management buttons
Show or remove component
The left and right channel faders are locked together.
When this box is checked, you can monitor the sound at the external
LINE, CD, or MIC input while recording.
l
b
SOURCE
Recording faders
REC
Playback faders
MIC
LINE
CD
SYNTH
WAVE
MASTER .
Select the recording source
CD, Mic, Line, or Loop recording level.
CD or AUX
FM or Wavetable Synthesizer
WAVE Playback
t
i
I
I
I b
\
!1
,
System requirements
At least 1 MB of available hard disk space
Windows 95,WindowsNT4.0
Sound board & its Windows driver
How to Play
1/
Common operations of CD, MIDI,.WAVE, and MULTI player.
Each component has the following basic functions:
Play, Stop, Pause, Fast Forward, Rewind.
The CD player also has Next and Previous functions.
!
1
I
i
;
Component buttons are marked with symbols commonly found on audio players. So if you’ve ever used an
audio player you’ll find YSTATION32 operation straightforward.
,
stop
Pause
Play
j
Scan backward
..-
.-
Scan forward
Go to beginning of previous song
Go to beginning of next song
Show or remove component
Open File Open dialog box. Drag & Drop is supported via File Manager
CD player only functions
Open and close the CD-ROM drive
Repeat playback indefinitely
If your CD-ROM drive does not support the Eject function, nothing will happen when you click the Eject button.
?k
38
2’
1
I
-.
. . i
- - - -
-
- r------ - -
-‘- _-.---...----.._- - ..-
- ..- ---“-. _.I.._ -.
-_---;~~ _
Playlist
The Playlist allows you to arrange CD tracks, MIDI songs, and WAVE sound files into a program of your choice.
Playback starts with the first item in the playlist and continues until all items have been played. The Play Mode can
be set to Repeat so that the playlist items are played repeatedly.
Click the LIST button on the Power Control component.
In the Playlist dialog box, shown below, arrange your CD, MIDI, and WAVE-data as desired.
You can enter the title of your CD.
Play Mode
When set to Single, the data in the play list is played once.
When set to Repeat, the data in the play list is played repeatedly.
Clicking the OK button saves the play list in the \Windows\Ystation.ini file. If the currently loaded CD is different to the
one specified in the play list, an error message appears. This means that the song name on the CD does not match
that in the play list. In this case you should edit the play list. Otherwise the error message will appear repeatedly.
4
Config
:
Click the CONFIG button on the Power Control component.
In the Config dialog box you can configure the YSTATION32.
Auto Play
When Auto Play is OFF, the WAVE, M,lDI, CD, and MIX components open when the YSTATION32 is started.
When Auto Play is ON, data registered in the play list plays sequentially when the YSTATION32 is started.
If Play Mode on the PlayList dialog box is set to Repeat and Auto Play is ON, data registered in the play list plays
repeatedly when the YSTATION32 is started.
I
Display mode
When Auto Play is ON, you can decide which components are displayed.
When set to Select, components whose box in the Component Select section are checked are displayed.
When set to Now Playing, only the component currently playing is displayed.
Component Select
The’ Component Select check boxes allow you to select which components are used for Auto Play. Components
whose box is checked are used for Auto Play. These settings are active only when the Display mode is set to Select.
Recording Mode
New
Overwrite
Add
Create a new file
Overwrite the existing file
Append to the current file
Sampling Rate
These buttons allow you to set the sampling rate for recording Wave files.
4
-.
.
.
i
Type
These buttons allow you choose either mono or stereo Wave file recording.
Data Format ’
These buttons allow you to set the data format to either 8 or 16 bit.
c
output
The playback volume,controls whose check boxes are checked will be displayed as mixer components. /
Up to seven volume controls may be selected.
Input
The recording volume controls whose check boxes are checked will be displayed as mixer components.
Up to four volume controls may be selected.
.
Error Messages
The following is a list of YSTATION32 error messages.
“Can’t open window’
This message appears if a window cannot be opened when YSTATION32 is started.
“Disc not loaded”
This message appears if you click the NAME button on the CD Component and no CD is loaded.
I
,1
me Wave data has changed. Save current changes?”
This message appears’if you attempt to quit with unsaved changes,“A Wave file with this name already exists. Overwrite?”
’
This’ message appears if you attempt tosave-a Wave file ‘using a name that is already used.
“Can’t get timer’
This message appears during playback if the Timer resources are insufficient.
“The CD loaded is different to that in the Playlist”
This message appears when you click the LIST button on the Power Component and the currently loaded CD is
different to that specified in the Playlist.
!
.
I
6
.
FAQ
.
[Q] What is the advantage of the SoundTrack digital-XG 3D sound?
In order to execute the 3D algorithm, most PCI audio providers use the expensive DSP or RAM requiring silicon.
On the other hand, Digital XG was designed as low-priced goods without the quality loss of the performance
I
which is realized by the Hardware DSP using Positional 30 algorithm of the Sensaura(TM).
[P] Does the Digital-XG support multi-wave’ output?
/I
Designed as multi-channel type sound card, Digital-XG, can play the multi-sound. Multi-output can be realized in
the Direct sound mode and Wave Mapper as well.
But ke use of the multi-channel might result the sound quality loss.
I/
[Q] Bule screen on the MVP, VIS, SIS, ALI board.
-
Digital-XG is compatible with the MVP chipset well. The problem can be solved easily by patch
mainboard with the diskette or CD.
the
[Q] How can I remove the noise when playing Games?
To begin with, reduce the occupancy rate of the PCI VGA card.
Move to the control panel -> system -> performance -> graphic and lower the graphic accelerate mode.
Some graphics drivers continuously write data through the chip set’s host-bridge chip to the driver’s PCI-based
graphics controller-even if the controller is not ready to receive-until’the transfer succeeds. (The PCI 2.1
protocol allows this practice, although critics say it’s a bug.) Intel has measured latencies of up to 20 milliseconds
before the graphics controller receives the data. No other data destined for other PCI devices may travel through
the host-bridge output buffer until the graphics controller accepts its data, which is queued in the buffer.
As a result, audio- and video-playback devices can’t receive data from the CPU and system memory when they
. need to.
This syndrome can cause clicks and pops in audio, produce visual artifacts. in video, or kill the streams
altogether. Intel recommends that affected graphics board vendors make a minor modification to their drivers to
fix the problem. The upcomrng PCI 2.2 specification will eliminate the problem by restricting retries to IO.
microsecond latencies.
In order: to resolve this problem, reducing the PCI slot occupation of the VGA card could be the solution. Move to
the Control panel -> system -> performance -> graphic and lower the graphic acceleration or move to the control
panel -> YAMAHA DS-XG Audio Config and check on the Game Trouble Shooting in the Primary Buffer.
,[Q] Proper sound doesn’t come in the directsound 3D Games of the window 98.
When using the WDM driver under windows 2000, similar problem could be occur. In this case, move to control
panel -> system -> device manager -> sound, video, game controller and remove all driver installed and insert
install CD and run the Setup.exe from the \SOUNDV(G\WIN98\SETUP directory.
c
-
c
.-
Option Parts
l)PA2000(PowerAmplifier)
Supports 4CH Ungrounded INS. ( like Stereo blanced IN)
3 volume controllers for Front, Rear and Headphone/Woofer
Stand alone product for 4CH Analog Out Devices(4Speaker Sound
cards)
(ST Digital Audio 4/16CH, ST 128 ISA/DDMA, ST Digital NXIXG,
SB Live, MX300 etc,.)
,
n
Features
Output Channel : 4 (2) Channel
Output Method : RCA Connector or Stereo Line Output
Volume Control : Front/Rear/lieadphone(Woofer)
Power Supply : PC Power or external adapter(optional)
Output Power : Power 60 Watt (MAX, R.M.S)
Input Method : 2 Analog l/8” jack
Power Switch : ON/OFF
S/N Ratio Under -9OdB
Connetion 4Speaker sound card (4CH ) or 2- Speaker Sound Card (2 CH)
2) SoundTrack Analog Amplifier
(Front)
It is designed for Sound Track family and whole Sound Cards
which support stereo Front /Rear Outputs such as SBLive! &
Value. Stand alone product with 4CH analog Ns
(Hear)
External Sound Track 4- CH analog AMF has 2 PCs of stereo
AMPS. It has 2 stereo analog inputs for SoundTrack ananlog
outputs. It has a level meter(Option), headphone and MIC jack with
speaker mute, 5 PCs volumes of 5 band Equalizer, Front & Rear
Volume.
[ SPECIFICATION I
l
l
l
l
Power : External DC1 2 - 14 V or DC 12V of internal PC
Speaker : output 4CH
Cables Bracket for Internal PC power, Speaker connector ( BNC to RCA Jacks), 2 kinds
power cables ST 4CH AMP with Level Meter
#
3) SoundTrack Digital Amplifier
SoundTrack Multi-CH digital AMP is designed for the ST D A and
SoundTrack family users who are the home musicians,-studio
manager, multimedia developers, broadcasters, producers and
more. Moreover, it is fit well for the highest performance
professional audio systems requiring the superior dynamic audio
performance, 24-bit resolution and 96kHz sampling.
Internal PC power or external DC +I 3 - +I 5Vapplicable.
D-SUB connetor for the digital input.
:
:.
Can be used as internal & external type.
Supports 5-band hardware equlizer with 5-volume.
(Q-RCA jack ;- is conneted by BNC connector to the digital Amp BNC connector for 4 kinds digital outputs from the
..
SoundTrack - is conneted with the digital I/O pins of Sound track 128.
:
All mixed inputs output through the headphone jack.
On/off power switch
On/off equalirer switch.
Cables : PC, power connecting cable, Power cable, 15pin option board connecting cable, 15pin speaker connecting
cable, 1 Spin’ flat cable.
Output power : 15 Watt (15*4=60 watt)
Components according to the Soundtrack series
9k 50 $k
.
* You can use SoundTrack Digital Amplifier on SoundTrack Digital
NX or Digital XG card with NX DB II
*This Figure is that SoundTrack Digital Amplifier connected
SoundTrack Digital XG with NX DB II
4) SoundTrack PA Digital Amplifier
PA Digital AMP/4CH accepts digital signal from the sound card and
provides clearer and lower noise output than any other analog
Amplifiers through the 24-bit, 96kHz DAC. PA Digital AMP/4CH ‘is
designed for external type which is the ideal amplifier’adding the
high performance of the SoundTrack Digital Amplifier and easy
interface - control of the PA2000.
C Features I
24-bW96KHz DAC (106dB)
3 Volumes controller for front, rear and headphone/woofer
L-A. A-_ .--.-._.- _. ..- _ __...
_
t Panel’]
Front Volume controller
Rear Volume controller ( for 4CI-t)
Head-phone/woofer volume controller
Head-phone jack output connector : l/4”
Woofer connector : l/8”’
Power On/Off switch
* You can use SoundTrack PA Digital on SoundTrack Digital NX or
Digital XG card with NX DB II
I
* This Figure is that SoundTrack PA Digital connected SoundTrack
Digital XG with NX DB II
5) SoundTrack WO2000 (Super Woofer)
wo 2000 8c 2 c H Anlp for two satellite speakers powerfully
reproduce sound as it is intended to be heard; tight, controlled,
accurate.
SUB WOOFER SPECIFICATION
i Power : 200 WATTS ( P.M.P.0)
l lmpedense : 4ohm
l 35 Hz to 250 Hz Frequency Range
l Contents : Woofer & 2CH Amp & power adapter
l Size: 180x210x280
6) Speaker
@ Satellite Speaker system for WO2000
l
Power : 30W + 30W ( P.M.P.0)
l
lmpedense : 4ohm
l
20 Hz to 15 KHz Frequency Range
l
Size:100x130x135
.
@ Satellite Mid,dIe Speaker system for WO 2000
l
Power : 40W + 40 W ( P.M.P.0)
l
Impedance : 4ohm
l
Frequency Range : 80 Hz to 20 kHz
Cize: 150x150x250
the Sound cards
.Changing
. . . . . . . . . . . . . . . . . . . . .the
. . . . . . . Speaker
. . . . . . . . . . . . . . . . . . .system
. . . . . . . . . . . . . . . changes
. . . . . . . . . . . . . . . . . . .the
. . . . . . . .sound
. . . . . . . . . . . . . quality
. . . . . . . . . . . . . . .from
. ...................*....*...........*................
’ P C s s ’ speaker system is unique in many ways. adding the subwoofer and satellite speaker to your-system, you
n
can create a complete and exact matchable speaker system!
PC Super Sound Speaker System
Since the amplifier, Woofer and speaker is independent, it’ s easy to upgrade current speaker system from the PCss 2.1 set
to the PCss4.1 set by adding the speakers or amplifier. ‘PCss’ not only look great, but provide thunderous bass and crystal
clear mid and high frequencies. Additionally, WO 2000, subwoofer, provides deep clean bass and the entire system provides
an over-all performance normally found only in high-end, expensive home audio systems
Product
PCss2.1
PCSS 4.1
PCss4.1
Digital
System
wo2ooo
Satellite sneaker x 2
PA20&/4CH,
Satellite middle _
speaker x 4,
WO 2000(optionaI)
PA Digital amplifier
Satellite middle
speaker x 4,
WO 2OOO(optionat)
Connection
Price
Digital-NX/XG, 40 WAVE-OX
& all sound cards
54 $
SB 64, ST NX/XG,
SB Live!(Value), SB 64,
$99 US ($138US)
& all 4-speakers sound cards
~-
SB 64, ST NXMG,
SB Live!(Value), SB 64,
& all 4-speajers sound cards
.
$149us
($188 US)
* This figure is PCSS4.1 Digital
full option solution
SoundTrack 4D WAVE Digital XG to DB I I
’
z Carefully connect to-NX DB fi (option) for using the
SoundTrack Digital Amplifier
Connect HDI, HD2 of Digital XG to HD3, HD4 of NX DB 1