Superior Products for your Woodie Wagon 2009

.
.
Customs Classics
&
Rods .
.
Since 1988
Superior Products for your
Woodie Wagon
Under construction
2009
catalog #7.2
Preston Wilson’s
1950 Ford Woodie
2008 SEMA Convention
email: [email protected]
Tom Fritz
www.ccrod.com
Shop Phone: (763) 241 - 1252
.
.
Customs Classics
&
Rods .
.
Since 1988
C
ustoms Classics and Rods was estabilished in 1988 by Tom Fritz.
His passion and desire to work on and ressurrect a variety of vehicles
started off with just a couple of cars in need of metal fabrication.
Over the last 20 years, we have grown into doing full restorations and
state of the art hot rods. We are doing a variety of things which
include: metal fabrication, chassis work, machining special one of a
kind parts and hard to find parts, engine modifications, and fully
customised parts. Stock to not, it’s all done here. Tom is always
looking to help the fellow car enthusiasts finish his project with any
help that he can provide.
18618 145th street
Elk River, MN
55330
763 241-1252
[email protected]
www.ccrod.com
Orders by mail or phone. Personal check, VISA or MASTERCARD are
welcome. Minimum shipping charge of $5.00 on all orders.
Blind Nuts
Blind nuts for 1934 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
1934 Ford blind nut, 5/16-18 thread .950 head dia.
1934 Ford blind nut set. 16 pieces
Item number
0434-07
0434-08
price
$4.65
$70.00
Item number
043739-11
043739-97
price
$4.35
$4.35
073739-98
$187.00
Blind nuts for 1937-39 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
1937-39 Ford blind nut, 5/16-24 thread, .735 head dia.
1937-39 Ford Blind nut, 5/16-18 thread, .735 head
1937-39 Ford blind nut set 45 pcs. 12 5/16-24 , thread with .735
head and 33 5/16-18 coarse thread with .735 head
Blind nuts for 1940 Ford wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
Item number
1940 Ford blind nut, 5/16-18 thread, .735 head dia.
0440-10
1940 Ford blind nut, 5/16-24 thread .735 head dia.
0440-99
1940 Ford blind nut set 50 pcs. 2 5/16-24 fine thrread and 48 5/16-18 coarse
thread
0640-70
price
$4.35
$4.35
$205.00
Blind nuts for 1941-48 Ford wagons and 41 thru 48 Mercurys
303 stainless steel, knurled shank, highly polished, perfect.
Description
1941-48 Ford blind nut, 5/16-24 thread, .735 head dia.
1941-48 Ford blind nut, 5/16-18 thread, .735 head dia.
1941-48 Ford blind nut, 3/8-24 thread, .950 head dia.
1941-48 Ford blind nut set, all three sizes 70 pieces, 4 large, 12
fine thread, 54 coarse thread.
Item number
044148-12
044148-13
044148-14
price
$4.35
$4.35
$5.00
044148-15
$290.00
Item number
034951-01
034951-02
035051-03
034950-04
price
$4.35
$4.35
$242.00
$290.00
Blind nuts for 1949-51 Ford and Mercury wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
Short blind nut for upper doors, 5/16-18 thread .750 head dia.
Long blind nut, 5/16-18 thread, .750 head dia.
Blind nut set for metal gate wagons. 52 long nuts, 4 short nuts.
Blind nut set for wooden gate wagons. 64 long nuts, 4 short nuts.
Ford hardware kit for mounting the wood with a metal gate. With 80
seal washers
Mercury hardware kit for mounting the wood with a metal gate With
80 seal washers
Ford hardware kit for mounting the wood with a wooden gate. With
100 seal washers.
Mercury hardware kit for mounting the wood with a wood gate. With
100 seal washers.
055051F-05
$49.50
055051M-05
$49.50
054950F-06
$57.00
054950M-06
$57.00
2
-
Blind nuts cont.
Blind nuts for 52-54 Ford and Mercury wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
This set is designed to replace all your blind nuts when new wood is
installed. 54 pieces. These nuts have a .800 head dia. And a 1/4-20
thread.
Item number
075254-93
price
$225.00
Blind nuts for your 55 thru 67 Ford of Mercury wagon
Call and we can set you up with a replacement set.
Blind nuts for 1946-48 Cheverolet wagons
and maybe some other General motors wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
1946-48 Cheverolet blind nut. 5/16-18 thread, .740 head dia
1946-48 Cheverolet blind nut. 1/4-20 thread, .800 head dia. Used for
door hinge screws
1946-48 Cheverolet blind nut set. 12 of the 5/16s and 8 of the 1/4
blind nuts. 20 pieces total.
Item number
044648-17
price
$4.35
044648-18
$4.35
044648-19
$82.00
Tube Screws for 42-48 Chevrolet wagons
and maybe some other General motors wagons.
303 stainless steel, correct head and tube dia.
Description
42-48 Chevrolet tube screws. 12 per car needed. Sold individually
Item number
064248-20
price
$4.50 ea.
Tube Screws for 49 Chevrolet wagons
and maybe some other General motors wagons.
303 stainless steel, correct head and tube dia.
Description
49 Chevrolet tube screws. These are longer than the 42-48. 8 per
car needed. Sold individually
Item number
0649-21
price
$4.75 ea.
Blind nuts for 1949 and 50 MOPAR wagons
303 stainless steel, knurled shank, highly polished, perfect.
Description
1949-50 MOPAR blind nut. Used on Plymouth, Dodge, Desoto and
Chrysler. 5/16-18 thread, .960 head dia.
1949-50 MOPAR blind nut set. 26 pieces
Item number
price
034950-09
034950-16
$4.65
$115.00
1949-50 MOPAR hardware.3" pan head zinc plated screw. Cut to fit
064950-71
$1.35
1949-50 Mopar hardware set. 26 pieces of 3" pan head screws
064950-72
$30.00
3
Blind nuts cont.
1949-50 MOPAR
034950-09
1937-39 Ford blind nut
043739-11
1940 Ford blind nut
0440-10
1946-1948 Chevrolet
044648-17
1949-51 Ford Mercury
034951-01 034951-02
1946-48 Chevrolet 1/4-20
044648-18
1934 Ford
0434-07
1941-48 Ford blind nuts
044148-12-13-14
3b
Bumper Bolts
1949-50 Mercury bumper bolts
These bolts are produced from billet 303 stainless steel. They are the correct
rectangular size and have the same multi directional radiuses as the originals.
7/16-20 threads, stainless flat and lock washers and a stainless nut..
Description
1949-50 Mercury bumper bolt.
Item number
034950-25
price
$28.00
1949-51 Ford woodie and Mercury woodie rear bumper bolt
These are the same as above.
Description
1949-51 Ford woodie and Mercury woodie rear bumper bolt.
Item number
034951-26
price
$28.00
1949-1959 Ford bumper bolts
These bolts are produced from billet 303 stainless steel. They are correct in diameter
and head curvature. 7/16-20 threads. 1.010 head dia. Stainless flat and lock washers
and a stainless nut. (Also used on some Mercurys such as 1951 fronts and 1953’s.)
Description
1949-59 Ford round bumper bolt
Item number
044959-27
price
$8.75
1951 Mercury rear bumper bolt
Larger in diameter than the Ford bolts, Used only in 51’. Produced from billet 303
stainless steel. They are correct in diameter and head curvature. 7/16-20 threads.
1.110 head dia. Stainless flat and lock washers and a stainless nut.
Description
1951 Mercury rear bumper bolt
1949-59 Ford Bump Bolt
044959-27
Item number
0551-28
51 Mercury rear
0551-28
price
$10.50
49-51 Ford/Mercury car/Woodie
034951-26 034951-25
4
Remanufactured door hinges
1949-50 Mercury door hinges
Media blasted, bored out and SAE 841 sintered bronze bearings pressed in. New hinge
pins and all new torx drive mounting screws, bevel lock washers and lock nuts.
Description
1949-50 Mercury 10 bolt door hinges for 2 doors and
the fronts of 4 doors
Item number
1949-51 Mercury rear door hinges for your 4 door car.
034951R-30
034950-30
price
with core
without core
with core
without core
255.00
440.00
255.00
302.50
1949-50 Mercury woodie door hinges
Same as above except for the woodie wagon only. The upper A-post hinge is clipped
and the bolt mounting locations are different for the wood clearance.
Description
1949-50 Mercury 10 bolt door hinges used on woodie
wagons
Item number
034950-31
price
with core
without core
290.00
539.00
1950-51 Mercury door hinges
Media blasted, bored out and SAE 841 sintered bronze bearings pressed in. New
hinge pins and all new torx drive mounting screws, bevel lock washers and lock nuts.
Description
1950-51 Mercury 8 bolt door hinges for 2-doors and
the fronts of 4-doors
Item number
1950-51 Mercury rear door hinges for your 4-door car
035051R-32
035051-32
price
with core
without core
with core
without core
255.00
440.00
255.00
302.50
1950-51 Mercury woodie door hinges
Same as above except for the woodie wagon only. The upper A-post hinge is clipped
and the bolt mounting locations are different for the wood clearance.
Description
1950-51 Mercury 8 bolt door hinges used on woodie
wagons.
Item number
035051-34
price
with core
without core
291.00
539.00
1949-51 Ford car and woodie door hinges
Ford door hinges are the same on all front doors, 2-doors, coupe, woodie. Media
blasted, bored out and SAE 841 sintered bronze bearings pressed in. New hinge pins
and all new torx drive mounting screws, bevel lock washers and lock nuts.
Description
1949-51 Ford door hinges
Item number
034951-35
1949-51 Ford rear door hinges
034951R-35
with core
without core
with core
without core
price
255.00
390.00
255.00
335.00
5
Remanufactured door hinges
1950-51 Mercury car
035051-32
1949-50 Mercury woodie hinges
034950-31
cont.
1949-51 Ford door hinges
034951-35
1949-50 Mercury car
034950-30
Hinge construction detail
6
Door Hinges hardware
Miscellaneous door hinges
The same care and procedures used for the 49-51 Ford and Mercury hinges are used
on other makes and models. Please call with your needs.
,
We can if needed, recreate missing
parts to complete the set.
Remanufactured door hinge
Description
Item number
04HINGE-39
price
call for price
1949-51 Mercury hinge pin
A new pin that we make in house. This pin is exactly the same as the original Mercury
unit. The same small domed head, shank knurls and even the oil grooves. Case
hardened..
Description
1949-51 Mercury door hinge pin. .280 dia.
1950-51 Mercury door hinge pin. .312 dia.
Item number
044951-37
055051-80
price
$6.50
$6.75
Item number
044951-38
price
$6.50
1949-51 Ford hinge pin
Same as above except shorter for the Ford hinge.
Description
1949-51 Ford hinge pin. .280 dia.
1949-51 Oversized pin to use in case of oversized holes. Same
construction as all other pins..312 Dia.
055051-80
$6.75
1949-50 Ford and Mercury door hinge screws
We have a supply of OEM. Style Philips dome headed screws.
Description
49-51 Ford NOS screw set with proper style lock washers and OEM
style nuts. [ 32 screws,32 lock washers and 4 lock units]
49-50 Mercury NOS screw set with proper style lock washers and
OEM style nuts. [40 screws,40 lock washers and 12 lock units]
50-51 Mercury NOS screw set with proper style lock wshers and
OEM style nuts. [32 screws,32 lock washers and 4 lock nuts]
49-51 Ford/Mercury dome headed phillips NOS door screw with lock
washer
Item number
price
064951-73
$42.00
064950-74
$66.00
065051-75
$45.00
064951-76
$1.25
1950-51 Ford and Mercury door hinge screws
These are new flat head philips screws
Description
49-50 Ford screw set with proper style lock washers and OEM
style nuts. [ 32 screws,32 lock washers and 4 lock units]
49-50 Mercury screw set with proper style lock washers and
OEM style nuts. [40 screws,40 lock washers and 12 lock units]
50-51 Mercury screw set with proper style lock washers and
OEM style nuts. [32 screws,32 lock washers and 4 lock nuts]
50-51 Ford/Mercury OEM style NOS door screw with lock washer
Item number
price
084951-83
$42.00
084950-81
$66.00
085051-94
084951-95
$45.00
$1.25
1948 and earlier Ford and Mercury door hinge screws
Hinge screw for early Fords. Has the clipped head so it sits down in the hinge.
Description
Item number
Early hinge screw. 3" long 5/16 thread, threaded all the way to the
head
063248-91
price
$3.00
Miscellaneous door hinge pins
Custom hinge pins for your unique application in stainless steel or plain steel
Custom door hinge pin
Description
Item number
06PIN-92
price
call for price
7
Door Hinges cont.
Mid 30’s Ford Woodie hinges.
An example of custome hinge repair
OEM hinge screws, lock nuts and washers
064951-76
1949-51 Ford door hinge pin
044951-38
1949-51 Mercury himge pin
044951-37
Early Ford hinge screw
063248-91
Stainless pin for a Packard.
An example of one of the many
custom parts we can produce
1937 Ford Woodie hinges.
An example of custome hinge repair
8
Woodie tailgate hardware
1949-51 Ford and Mercury upper tailgate striker
Billet 303 stainless steel polished to a mirror. All angles correctly machined for
proper primary and secondary latch operation. Includes mounting screws in stainless steel.
Description
1949-51 upper tailgate striker
Item number
034951-40
price
$50.00
1949-51 Ford and Mercury upper tailgate handle bushing
Billet 303 stainless steel polished to a mirror. Used to fill the space between the interior
handle and the tailgate.
Description
1949-51 upper tailgate handle spacer
Item number
044951-24
price
$11.25
Item number
064951-78
064951-33
price
$26.50
$55.00
1949-51 Ford and Mercury upper tailgate latch tongue
Replacement latch tongue for your upper gate latch.
Description
1949-51 Ford and Mercury latch tongue.
1949-51 Ford and Mercury latch tongue in stainless steel.
1950-51 Ford and Mercury tailgate hook shoulder bolt
303 stainless steel, 1/4 –20 fine thread, same dimensions as the original.
Description
1950-51 Ford and Mercury tailgate hook shoulder bolt with stainless
lock nut. 1/2" hex head.
1950-51 Ford and Mercury tailgate hook shoulder bolt with stainless
lock nut. 9/16" hex head.
Item number
price
045051-41
$12.50
055051-29
$12.50
1950-51 Ford and Mercury tailgate hook brackets
303 stainless steel or 16 gauge cold roll steel. Hook hole is rolled and squared. Like the original.
Description
1950-51 Ford and Mercury tailgate hook bracket pair in stainless
steel with correct style stainless steel mounting screws.
1950-51 Ford and Mercury tailgate hook bracket pair in plain steel
with correct style mounting screws.
Item number
price
045051-42
$45.00
045051-43
$25.00
1949-51 Ford and Mercury tailgate arms shoulder screw
303 stainless steel, same large head with correct diameter and dome. Correct oversized screw driver
slot and the correct shoulder to fit into lower tailgate arm limit strap.
Description
1949-51 Ford and Mercury tailgate limit strap shoulder screw.
Item number
044951-44
price
$19.50
1949-51 Ford and Mercury tailgate limit strap eye bolt
303 stainless steel, eye bolt used to attach the tailgate travel limit strap to the tailgate.
Description
1949-51 Ford and Mercury tailgate limit strap eye bolt.
Item number
044951-45
price
$29.50
9
Woodie tailgate hardware cont.
1949-51 Ford/Merc upper gate striker
034951-40
Plain steel hook bracket
045051-43
Tailgate hook shoulder bolt
045051-41
Stainless hook bracket
045051-42
1949-51 Upper handle bushing 1949-51 Ford, Merc shoulder screw
044951-24
044951-44
49-51 Tailgate eye bolt
044951-45
1949-51 Latch tongue
064951-78
10
Woodie tailgate hardware cont.
1949-51 Ford and Mercury tail lamps
Description
These tail lamps are a replacement for your missing lamps. They have highly polished stainless
metal housing, glass lenses and a stainless lenses retainer. Available with a black housing or a stainless one.
Description
Stainless tail lamp housing with license lamp. Driver side.
Stainless tail lamp housing no license lamp. Passenger side
Blue dot lenses for above lamps.
Item number
044951-22L
044951-22R
044951-23
price
$44.00
$44.00
$15.95
1949-51 Ford and Mercury tail lamp wire cover
This is the wire cover that attaches tothe back side of the tail lamp housing. It directs the wires
down and away from the rear of the sheet metal cover.
Description
Tail lamp wire cover in plain steel
Item number
044951-36
price
$11.00
1949-51 Ford and Mercury tail lamp leg
A replacement for your bent or missing leg. Comes with the foot, mounting gasket and
mounting screws. No rivets in joints
Description
Replacement tail lamp leg assembly
Item number
044951-53
price
$69.00
Item number
074951-50
074951-51
074951-52
price
$18.90
$1.65
$1.25 ea
1949-51 Ford and Mercury Tail Lamp Leg Foot
Replacement foot for your tail lamp leg.
Description
Replacement foot
Replacement foot gasket
Replacement stainless foot mounting screw with lock washer
1949-51 Ford and Mercury Tail Lamp Pad
Replacement tail lamp to tailgate mounting pad. Use to change a metal gate tail lamp to a
wood gate tail lamp or replace your bad one.
Description
Tail lamp pad, passenger side for a metal gate.
Tail
lamp
pad,
drivers
side
or or
passenger
side
with
a wood
gate.
Tail
lamp
pad,
drivers
side
passenger
side
with
a wood
gate.
Item number
065051-57
064951-58
064951-58
price
$29.90
$29.90
1949-51 Ford and Mercury tailgate wear strips
Replacements for your dented originals. These are machined from Billet 304 stainless steel.
Not a stamped part. They come in a 5 piece set or a 3 piece set in plain steel or polished stainless steel.
Description
5 piece set in stainless steel with the 20 mounting screws
3 piece set in stainless steel with the 12 mounting screws
5 piece set in plain steel with the 20 mounting screws
3 piece set in plain steeel with the 12 mounting screws
Item number
044951-46
044951-47
044951-48
044951-49
price
$265.00
$265.00
$265.00
$265.00
1949-51 Ford and Mercury upper tailgate gas strut kit
Replace the original poorly functioning factory lift kit with this direct bolt in replacement
kit. This kit fits exactly as the original but uses modern gas charged struts. The mounting brackets
are available in stainless steel or plain
steel, with or without the blackgasItem
struts.
Description
number
Strut kit in polished stainless steel with polished stainless hardware
and black struts.
044951-54
Strut kit in plain steel with plain steel hardware and black struts.
044951-55
Strut kit in polished stainless steel with polished stainless hardware
and no struts.
044951-35
Strut kit in plain steel with plain steel hardware and no struts.
044951-100
price
$185.00
$110.00
$150.00
$69.00
11
Woodie tailgate Parts
Strut kit stainless
0449515-54
Strut kit without struts in stainless
044951-
Strut kit installed in a 49-51 Ford/Mercury
1949-51 Tail lamp foot and leg
044951-53
1949-51 Tail gate wear strips
044951-46
12
Interior Parts
1949-51 Ford cowl kick panel retainers
Cowl kick panel retainers for cardboard and plywood panels used in woodies. Available
in plain steel or in polished stainless steel.
Description
Kick panel retainers set in plain steel for cardboard kick panels.
Kick panel reatiner set in polished stainless steel for cardboard
panels
Kick panel retainer set in plain steel for plywood kick panels.
Kick panel retainer set in polished stainless steel for plywood kick
panels.
Item number
044951-60
price
$45.00
044951S-60
044951-61
$80.00
$45.00
044951S-61
$80.00
Item number
054951-62
074951S-62
price
$49.00
$80.00
Item number
044951-63
price
$19.50
1949-51 Ford and Mercury woodie linoleum retainers
Linoleum retainer used around the rear wheel tubs in your woodie.
Description
Linolium retainer set of 2 in plain steel.
Linolium retainer set of 2 in stainless steel..
1949-51 Ford and Mercury woodie fuel pipe retainer
Used to seal the fuel filter pipe to the floor
Description
Fuel pipe grommet retainer in plain steel with new screws.
Fuel pipe grommet retainer in brushed stainless steel with new
stainless screws.
Fuel pipe to floor grommet.
044951S-63
044951-64
$29.50
$7.50
1946-48 Chevrolet interior handle escutcheons
These are beautiful. Two pieces of billet stainless steel with a spring inside.
These work and look exactly like the original escutcheons for the door handles and window crank handles.
Description
Stainless Chevrolet escutcheon
Complete set of 10 escutcheons
Item number
064648-81
064648-82
price
$39.00
$325.00
1937-40 Ford and Mercury woodie rear window lock pins
The pins used to latch the rear windows in woodie wagons. Machined from 303 stainless steel.
Description
Long pin - machine finish
Short pin - machine finish
Knob for above pins - highly polished
Item number
063740-85
063740-86
063740-87
price
$9.50
$9.50
$8.00
1949-51 Ford and Mercury woodie rear window lock pins
The pins used to latch the rear windows in woodie wagons.
Description
Short pin used on the latch attached to the glass. Stainless steel.
Long pin used on the latch attached to the B-post. Stainless steel.
Item number
054951S-66
054951L-66
price
$9.50
$9.50
13
Interior Parts cont.
49-51 Ford Kick panel retainers in stainless steel
044951S-60
49-51 Window lock pins
054951S-66
054951L-66
37-40 Ford window lock pins
063740-85
063740-86
063740-87
46-48 Chev Escutcheon
064648-81
46-48 Chev Escutcheon
064648-81
14
Small Items
1949-51 Ford and Mercury woodie door lock cyl. rods
The extra long rod used in woodies to reach from lock cylinder to latch.
Door lock cyl. Rod.
Description
Item number
054951-65
price
$8.50
1949 Exterior door handle pivot pin
Pivot pin inside the exterior door handle of 49 Mercury cars, woodies and Ford woodies.
Pivot pin
Description
Item number
0549-67
price
$3.50
1949 Exterior door handle push rod
Push rod for Mercury and Ford woodies. Used between door handle and latch.
Description
Exterion door handle push rod
Item number
0549-68
price
$3.50
Item number
054953-90
price
$9.50
Item number
064951-88
064951-89
price
$5.25
$4.25
1949-53 Ford and Mercury hood bolts
New hood bolts in polished stainless steel.
Stainless hood bolt
Description
1949-51 Ford and Mercury overdrive cable retainers
Description
Hoop clamp for cable
Double hole bracket for cable end.
1949-53 Ford Mercury hood bolts
054953-90
49 Ford Merc. door handle push rod
0549-68
15
Sheet Metal
1949-1951 Ford and Mercury Woodie and Ford
car sheet metal repair and replacement panels.
All of the replacement parts on these pages are referenced from these terms. The
A-post: The door hinge post. The B-post: The door striker post. The C-post: The
post where the tailgate is. The left side: The drivers side, and the right side: The
passenger side.
1949-51 Ford/Mercury woodie rocker panel extensions.
These are hand formed in our shop and fitted to a buck so each one is correct. This Part goes from the
seam under the B-post to the rear wheel opening. From the underside of the inner rocker to up and under
the wood on the side of the car. They are 23 inches long. Longer than needed to allow for trimming at the
B-post. These replacement panels are constructed from 19 guage stock as the originals were.
Left hand side (drivers)
Right hand side
Description
Item number
064951-500L
064951-500R
price
$95.00
$95.00
1949 early 1950 Ford/Mercury woodie 2nd seat area floor pan.
This is a near exact replacement of the floor section where the seat plugs in. This panel goes from the front
floor seam back to the upright transission where the 3rd seat passengers feet go. From the seam along the
drop area along the outside edge, up to and along the wheel tub over to the edge of the tranny tunnel. The
flaps to cover the seat hole plugs are solid riveted on as original was if you have that style. The other style
has the seat latches bolted to the bottom of the floor pan. The beads in the panel are the same width and
depth. This panel is constructed from 15-gauge stock. Please specify your style.
Description
Item number
price
Left hand side (drivers)
064951-501L
$290.00
Right hand side
064951-501R
$290.00
1949-51 Ford/Mercury woodie C-post filler panel
This is the little ¼ round panel that fills the gap at the rear of the floor in the rear corners of the car. The
C-post panel comes with the correct bead, and wire harness pass through holes. The felt seals are also
included with each one. These filler panels are constructed from 19-gauge stock just like the originals.
Left rear corner (drivers)
Right rear corner
Description
Item number
074951-502L
074951-502R
price
$45.00
$45.00
1949-51 Ford car or woodie front fender outer skin patch.
This is a 19-gauge repair panel. The folded seam along the door edge is present and prebent to allow the
inner brace to slip in. The bottom edge has the step formed as the original did. This panel is 16.25 inches
tall from the very bottom edge up and around and onto the side. It is 10 inches wide from the door edge
to the wheel opening.
Description
Left fender repair panel (drivers)
Right fender repair panel
Item number
074951-503L
074951-503R
price
$49.00
$49.00
1949-51 Ford car or woodie front fender inner brace repair.
This is a 19-gauge repair section. This panel has the curve in it to match the bottom of the fender. The
mounting flange is there and it is long enough for you to install it where the inner brace is straight and easy
to work at. Just above the lower cowl mounting bolt. Overall length is 13 inches.
Description
Left fender inner brace repair (drivers)
Right fender inner brace repair
Item number
074951-504L
074951-504R
price
$99.00
$99.00
16
Sheet Metal
1949-51 Ford or Mercury woodie rear tail pan assembly.
These panels are 19-gauge steel, the same as Ford used. They have all the oval mounting holes punched
in them. The left and right side panels have the correct bracing on the backside as Ford did them. The
middle pan comes unassembled and all the pieces are sold separately.
Description
Left side tail pan with tail lamp threaded holes (drivers)
Right side tail pan with tail lamp threaded holes
Right side tail pan with No tail lamp holes
Left side tail pan with No tail lamp holes
Center tail pan. The outer cover.
Center tail pan inner panel used in 49, early 50 but works well in any
years to stiffen assembly
Item number
074951-505L
074951-505R
074951-506R
074951-506L
074951-507
price
$195.00
$195.00
$175.00
$175.00
$180.00
074950-507
$120.00
Left side inner brace, repair section for the lower 3/4'a of the brace
Center inner brace, repair section for the lower 3/4'a of the brace
Right side brace, repair section for the lower 3/4'a of the brace
074951-508L
074951-508C
074951-508R
$24.50
$24.50
$24.50
1949-51 Ford car or woodie dimmer switch cover plate
These are constructed from 20-gauge sheet stock. They are formed up like the originals. They have the
holes for the dimmer switch but do not have the holes for mounting the plate to the toe kick. We have
found that those holes will vary from car to car and so you should match the cover plate up to the old
holes and then drill them out.
Dimmer switch cover plate
Description
Item number
074951-509
price
$45.00
1949-50 Ford woodie A-post floor support
These are constructed out of 16-gauge steel as Ford had done and are the correct length for the woodie
floor pan. These go from the bottom of the A-post (where the door hinges mount) to the center of the car
at the opening in the floor for the transmission. These are not like the other ones that are too short and
constructed from 20-gauge stock. The drivers side support has the recess for the removal of the clutch
pedal just as the original or order the one with out if you are building a hot rod.
Description
A-Post floor support left side with clutch recess.
A-Post floor support left side without clutch recess.
A-Post floor support right side (passenger)
Item number
074950-510L
074950-511L
074950-510R
price
$230.00
$190.00
$190.00
1949-50 Ford woodie B-post floor support
These are constructed out of 16-gauge steel as Ford had done and are the correct length for the woodie
floor pan. The sides with the large holes in them are also 16 gauge, instead of 19 guage, to add stiffness
to the whole structure. Unlike the car ones or the aftermarket ones they are the correct length and gauge
of metal for the wider woodie. These go from the B-post (where the door striker is) to the center tunnel of
the wagon.
Description
B-Post floor support leftside (drivers)
B-Post floor support right side
Item number
074950-512L
074950-512R
price
$290.00
$290.00
17
Sheet Metal cont.
1949-51 Ford woodie B-post to wheel tub floor panel
These are constructed from 18-gauge steel. These panels have the stepped edge going from front to rear
on the floor side and have the 90-degree flange on the inner rocker side. The panel has the wedge shaped
step in it that goes from the middle of the panel to the wheel tub end and is about 3 13/16” at the wheel tub.
The upper part of the panel at the wheel tub has the curved flange to meet up with the wheel tub edge.
B-Post floor (drivers)
B-Post floot
Description
Item number
074951-513L
074951-513R
price
$149.00
$149.00
1949-51 Ford woodie B-post to wheel tub floor access panel
This is the panel that is screwed to the floor along the outside edge of the floor between the B-post and the
wheel tub. This part is the one that goes on top ot the 074951-513. Constructed from 18-guage material
just like Henry’s was.
Description
B-post access panel
B-post access panel (passenger)
Item number
084951-522L
084951_522R
price
$49.00
$49.00
1949-51 Ford woodie B-post interior bottom
This is the little angle part that is welded to the bottom of the B-post and to the floor and part #522 sets
on top of it. Constructed from 18 guage steel.
Description
B-post interior bottom
B-post interior bottom (passenter)
Item number
084951-523L
084951-523R
price
$45.00
$45.00
1949-51 Ford woodie lower A-post interior extension repair
This repair section is constructed from 20-gauge material. This repair panel is 8 inches long and goes
from the bottom (the floor) up 8 inches. It has the first rectangular hole in it and has the same taper as the
original for a smooth fit. This repair panel is designed to be butt welded into place.
Description
A-Post extension repair (drivers)
A-Post extension repair
Item number
074951-514L
074951-514R
price
$89.00
$89.00
1949-51 Ford/ Mercury rear floor side extensions
This replacement panel goes from the wheel tub to the C-post. From the edge of the main floor out to the
inside edge of the outer body. The driver’s side has the flanged hole for the gas filler pipe. Both panels
have the stepped edge to go under the center floor like Ford did it. They have the 1/8” deep stepped
recess that goes front to rear and ends at the tailgate hinge.
Description
Rear floor extension (drivers)
Rear floor extension
Item number
074951-515L
074951-515R
price
$145.00
$125.00
1949-51 Ford/ Mercury woodie wheel tub forward body mount
This replacement mount goes in front of the wheel tub and behind the B-post. It is constructed from
12-gauge material. The original is constructed from thinner 13 gauge. This part is designed to replace
your bent or rusted original.
Description
Wheel tub body mount left side (drivers)
Wheel tub body mount right side
Item number
074951-516L
074951-516R
price
$29.00
$29.00
18
Sheet Metal cont.
1949-51 Ford/ mercury woodie rear wheel tub repair panels
These panels are the lower tails of the wheel tub that rust off or are crushed. They are constructed from
18-gauge sheet stock and formed in our shop. The rear tail panel is 13” tall from the bottom lowest edge
and 15” wide. The front panel is 9” tall from its lowest edge and 14” wide. These panels have the formed
edge that buts into the quarter panel.
Description
Left side (drivers) front repair panel
Right side front repair panel
Item number
074951-517LF
074951-517RF
price
$145.00
$145.00
Left side (drivers) rear repair panel
Right side rear repair panel
074951-518LR
074951-518RR
$120.00
$120.00
We custom make panels for customers all the time.
Call us with your needs
1949-51 Ford/Mercury woodie metal to wood gate conversion
This is a kit to convert your metal gate to a wood gate. With the removal of the outer skin and then the
addition of these parts your gate is now the same as a wood gate. These panels are 19 gauge. The
main center panel is designed to be but welded into place and the filler tabs get welded on top of the old
gate in the slot at the top of the gate. A wood gate inner spare tire-mounting bracket has a higher profile
than the one used with a metal gate. An original wood gate one will work if you have one or use our
duplicate reproduction. The reproduction one is constructed from 13 gauge stock and has the ribs
formed in the bottom just as the original. The reproduction also has the four shouldered studs welded in
place. The outer bracket is an exact copy of the original, use ours or find and original. The outer bracket
is different for a wood gate than the one used on the metal gate. The reproduction outer bracket comes
with the tire-mounting studs welded in place. The inner spare tire-mounting bracket is 13 gauge material
just like Henry made them. The outer spare tire-mounting bracket is 11 gauge as the original one was.
Description
Metal to wood gate conversion kit.
This kit contains the following: Upper cross rail filler panel, 5 upper
groove filling tabs, 3 spacers for the wood under the blind nuts and, 6
spacers for the wood at wood screw locations.
Inner spare tire mounting bracket for a wood gate
Outer spare tire mounting bracket for a wood gate.
Item number
075051-519
price
$99.00
074950-520
074950-521
$365.00
$365.00
18b
Sheet Metal Pictures
A-post floor supports
074951-510L
074951-510L
C -post filler panels
074951-502L and - 502R
074950-512L
Front fender outer skin patch
074951-503L and 074951-503R
B-post floor supports
074950-512L and -512R
Rocker panel extension
064951-500R
Rocker panel extensions
064951-500L and -500R
Rear wheel tub forward repair panel
074951-517LF and -517RF
074951-517RF
19
Sheet Metal Pictures
Center tail pan inner panel
074950-507IN
A-post interior repair bottoms
074951-514R and -514L
A-post interior repair bottom
074951-514L
Center tail pan outer panel
074951-507
Left and right side tail pans
074951-505L and -505R
074951-505R
R ear floor side extensions
Front fender inner brace repair
074951-151L and -515R
074951-504R
Inner spare tire mounting bracket
074950-520
Outer spare tire mounting bracket
074950-521
Sheet Metal Pictures
B -post to wheel t ub floor panel
074951 -513L and 074951-513R
B -post to wheel tub floor access panel
084951-522L and 084951-522R
Left, right and center tail pan braces
074951-508L and 074951-508C and 074951-508R
Wheel tub forward body mount
074951-516L and 516R
Di mmer switch cover plate
074951-509
B-post interior bottom
084951-523L and -523R
Second seat floor pan for 1949 and early 1950
064950-501L and 064950-501R
21