ONLINE AUCTION

Transcription

ONLINE AUCTION
ONLINE AUCTION
Recycling
Asphalt
fromCranes,
Assets
Surplus
Bridge
Horizontal
BoringCompany
Mills & More
Assets located in
South Dakota, North Dakota
and Nebraska
By Order of Secured Lender:
ASPHALT RECYCLING SOLUTIONS
(call 224-927-5320 for specific addresses)
BID ONLINE: Now through Wednesday, April 22 at 1:00pm
Cold Planing Machines • Trucks • Cutting Head Trailer • Trailers
Travel Trailer • Shop Equipment • Repair Parts & Components
New Auction
Closing Date
Wed., April 22
1:00 pm
New
2006
New
2005
New
2004
BID ONLINE ONLY
18% Online Buyer’s Premium Applies
NOTE TO BIDDERS: Some equipment is disassembled or incomplete. Buyers are strongly advised to inspect before buying.
105 Revere Drive, Suite C
Northbrook, Illinois 60062
Phone: 224.927.5320
[email protected]
www.pplauctions.com
PPL License No. 444.000322
David Muslin License No. 441.001650
3901 Kraus Lane Hamilton, OH 45014
513.738.3311 www.myronbowling.com
Joel Bersh License No. 441.000826
Michael L. Ackerman License No. 440.000539
PLACE BIDS
ONLINE ONLY
COLD PLANING MACHINES
Caterpillar Self Propelled Diesel Cold Planing Modified to Reclaimer Machine Model PR-1200 (Dickinson, ND)
CMI Self Propelled Diesel Cold Planing Machine Model PR-1200, S/N 532-105 (1995), with Gator Crusher (Rapid City, SD)
CMI Self Propelled 14’ Up or Down Diesel Cold Planing Machine Model PR-1200, S/N 532-103 (1992) (12 mi. east of New Town, ND)
CMI Self Propelled Diesel Rubber Tire Cold Planing Machine Model RS-800, S/N 553-109 (Stanley, ND)
CMI Self Propelled Diesel Cold Planing Machine Model PR-800-7, S/N 536-113 (1991), CAT 3412 Diesel (Rapid City, SD)
Easy Miner Self Propelled Diesel Cold Planing Machine Model 100/475 (no engine) (Williston, ND)
CMI Self Propelled 12’ Diesel Cold Planing Machine Model PR-1200 FL, S/N 532-102, with Conveyor (12 mi. east of New Town, ND)
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
NOTICE TO ALL BIDDERS:
UCC sale assets represent “repossessed” goods which secured party has neither inspected, repaired nor has any
expertise in evaluating its physical condition. The UCC sale assets are being sold “as is, where is” as defined by
the UCC. Secured party disclaims any implied warranties of merchantability and fitness for a particular purpose
and all warranties express or implied are excluded from this transaction. Secured party acknowledges that there
are no warranties whatsoever regarding the UCC sale assets or components contained therein, except as may be
required under applicable state law; and each purchaser at the auction accepts the entire risk as to quality and
performance of the UCC sale assets and has relied upon its own judgment and inspection in determining that the
UCC sale assets are of acceptable quality and are suitable for purchaser’s particular needs.
PLACE BIDS
ONLINE ONLY
CUTTING HEAD TRAILER
1991 CMI Special Purpose 3-Axle Heavy Duty Low Boy Trailer Model 51799, S/N 532102,
for transporting CMI Planer Cutting Head, with Hydraulic Elevation (Sioux Falls, SD)
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
New
2005
New
2006
New
2006
New
2005
New
2005
New
2003
TRUCKS
2005 International 4x2 Single-Axle Mechanic’s Truck Model 4300 SBA, VIN 1HTMMAANX5H138758, with Navistar/International Diesel Engine,
Auto Crane Service Body, Lincoln Ranger 305G Gas Powered AC/DC Welder, I-R Gas Powered Air Compressor with Hose Reel,
Diesel Fuel Transfer Tank & Auto Crane Electric Hoist (Unit 388) (Sioux Falls, SD)
2006 Chevrolet 4x2 Single-Axle Mechanic’s Truck Model C-5500, VIN 1GBE5C1236F401173, with Duramax Diesel Engine, Dakota Service Body,
Lincoln Ranger 305G Welder, I-R Gas Powered Air Compressor with Hose Reel & Auto Crane Electric Hoist (Unit 386) (Sioux Falls, SD)
2006 Chevrolet 4x2 Single-Axle Mechanic’s Truck Model C-5500, VIN 1GBE5C1206F401079,
with Duramax Diesel Engine, Dakota Service Body, I-R Gas Powered Air Compressor (Unit 385) (Sioux Falls, SD)
PLACE BIDS
2005 Ford 4x2 Single-Axle Mechanic’s Truck Model F550 XL, VIN 1FDAF57P55EA21158,
ONLINE
ONLY
Diesel, Service Body, Auto Crane Electric Hoist (Unit 318) F/P (Rapid City, SD)
2005 Ford 4x4 Pick-up Truck Model F150, VIN 1FTPX14565FA73111 (Sioux Falls, SD)
2003 Ford 4x4 Crew Cab Pick-up Truck Model F150 XLT, VIN 1FTRW08L93KB47527 (Gering, NE)
1996 Dodge Dually Utility Truck, VIN 1B7JC26Z7TJ184249 (Stanley, ND)
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
New
2004
Bid Online April 13th through April 16th
TRAILERS • TRAVEL TRAILER
1998 Wells Cargo 20’ Tandem-Axle, 13,000 lb. Capacity Utility Cargo Trailer Model EW-2025, VIN 1WC200J23W1083934,
with Side Door, Double Rear Doors, Storage Racks & Lubrication Equipment (Sioux Falls, SD)
2004 J&LS Cargo Express 12’ Tandem-Axle Utility Cargo Trailer Model Shadow Master, VIN 4U01S12204A021517,
with Side Door, Double Rear Doors, Storage Racks & Lubrication Equipment (Sioux Falls, SD)
1992 Coachman 32’ Travel Trailer (Gering, NE)
SHOP EQUIPMENT
(all in Sioux Falls, SD)
Miller 200 Amp DC Constant Potential MIG Welding Machine Model SCP-200C, S/N HJ185138,
with Millermatic 10E Wire Feeder, Cart, MIG Welding Gun, Welding Leads & Inert Gas Regulator/Flow Meter
Lincoln 225 Amp AC/DC Shielded Arc Welding Machine Model AC/DC-225, S/N 8566-203, with Cart & Leads
Miller Suitcase Type Portable 12 Volt Flux-Core Wire Feeder Model S-32P, with MIG Welding Gun & Leads
Smiths Portable Oxy Acetylene Cutting Torch Rig Model WH200A,
with Harper Cylinder Cart, Hoses, Smiths Regulators, WA200 Torch Body, SC209 Cutting Attachment, Welding Tips & ST602 Rosebud Heating Tip
Aaladin Kerosene Fired Electric Operated 3000 PSI High Pressure Hot Water Washer Model 1470, S/N 60839,
with 8 HP Electric Motor, Cleaning Wand & Gun, Hose, Hose Reel, Cleaning Solution Tank, Mobile Cart
Sanborn 5 HP Vertical Tank Type Air Compressor Model B51-A24-80V1, S/N L3125027
Custom 2-Section Welded Steel Storage Shelf Unit, with Contents
Central Machinery 15” Floor Type Single-Spindle 1 HP V-Belt Drive Drill Press Model T-583, S/N 10816065
Wilton 6” Heavy Duty Bench Vise, with Welded Steel Work Table • Werner 8’ Fiberglass Step Ladder
Tool Shop 1/2 HP, 6” Double End Pedestal Grinder • Shop Vac 5 Gallon, 5.5 HP Portable Shop Vacuum • Werner 4’ Fiberglass Step Ladder
Lyon Type 36” x 6’ Steel Shelving Unit, with Welding Supplies • Milwaukee 14” Chop Saw Model 6177, with Vise, 15 Amp
(2) Milwaukee Battery Powered Grease Guns Model M-12, with Charger • 20 Gallon Parts Washer Model 140400, with Pump & Stand
Custom 1 Ton x 18’ Span Portable Gantry Hoist, with Mobile Caster Base, 1/2 Ton Dayton Electric Chain Hoist & 2 Ton Chain Fall
Custom Portable Hydraulic Engine Hoist, AC Motor, Hydraulic Pump & Control Valve • Solar 6/12/24 Volt Battery Charger Model 670 Fleet
PPL Auction
Phone: 224.927.5320
www.pplauctions.com
REPAIR PARTS & COMPONENTS
Large Assortment of Equipment Repair Parts & Disassembled Equipment Components
Auction Terms & Conditions
REGISTRATION & BIDDING: Everything will be sold to the highest bidders for cash, in accordance with the auctioneer’s normal “Terms of Sale”, which are available at the site or by request at 224-927-5300. All
bids are in US dollars. An 18% Buyer’s Premium will be added to online bids. Your bid is a contract: Place a bid only if you’re serious about buying the item. If you are the high bidder, you will enter into a
legally binding contract with PPL Auction.
PAYMENT: All successful Bidders agree to make full payment to PPL Auction at the conclusion of the sale. Only Bank Wire Transfer, Bank Check or Cashier’s Check payable to PPL Auction will be
accepted. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. If you are using a wire transfer your bank may wire the funds the day after the
sale. All sales are subject to sales and/or local taxes unless a signed exemption form is presented at the time of the purchase. Payment will be made in US dollars only.
VERIFY DESCRIPTIONS: Note: Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the
information contained in the auction brochure, lot catalog or sale web pages.
Buyer agrees to accept assets purchased per standard auction terms, “AS IS, WHERE IS, WITH ALL FAULTS” WITHOUT ANY REPRESENTATION OR WARRANTY BY PPL AUCTION OR ANY OTHER
PERSON. THERE ARE NO EXPRESSED OR IMPLIED REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ASSETS INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR
WARRANTY REGARDING THE MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
REMOVAL & RIGGING: Removal and Rigging is the responsibility of the buyer. Anyone, either a buyer or a rigger, who uses a powered vehicle to remove anything from the auction site, will be
required to present a certificate of insurance. Removal may begin when the auction has completed and payment in full has been made.
ISSUANCE OF TITLE: Titles relative to titled assets purchased will be mailed to the purchaser’s address on file after payment is received and cleared.
All invoices must be paid in full at end of auction. Any merchandise not paid for at this time will be considered abandoned and may be resold by auctioneer, any loss incurred in the resale to be borne
by the original buyer.
105 Revere Drive, Suite C
Northbrook, Illinois 60062
Phone: 224.927.5320
[email protected]
www.pplauctions.com
PPL Auction
Phone: 224.927.5320
3901 Kraus Lane Hamilton, OH 45014
513.738.3311 www.myronbowling.com
www.pplauctions.com