the lock range

THE LOCK RANGE
—
Mortice locks for timber
and narrow-stile doors
THE LOCK RANGE MORTICE LOCKS
2
DORMA
THE LOCK RANGE MORTICE LOCKS
CONTENTS
—
DORMA Locks
Mortice locks for timber doors
Mortice locks for narrow-stile doors
6
12
DORMA
3
THE LOCK RANGE MORTICE LOCKS
WELCOME TO THE SAFE SIDE
—
DORMA locks offer
compelling benefits thanks
to assured high quality and
functional integrity combined
with long service lifetimes.
With high-grade materials,
careful manufacturing and
a comprehensive quality
management system, these
products are able to satisfy
virtually all the technical
requirements ever likely
to arise.
Conforming to BS EN
12209, BS EN 179 or
DIN standards, DORMA
locks offer unbeatable
performance, safety and
security.
Under Approved Document
M and BS8300, locks are
recommended to have a
minimum backset of 55mm
and centres of 72mm (the
distance from the lever
handle follower to key centre)
to ensure ease of operation.
Both the Premier and
Contract series of locks meet
these recommendations.
Whichever solution you opt
for, you can be sure that
absolute reliability and
engineering excellence will
be included as standard.
CF267
All DORMA ‘F’ and Mortice
Escape Locks are CE marked
and CERTIFIRE approved for
1hr on timber doors and 4hrs
on metal doors (intumescent
pack required for 1hr timber
doors – not required for 1/2hr
timber fire doors or metal
doors).
Mortice locks for timber doors
Premier series
Nightlatch with Project
Sashlock
WC sashlock
Latch
Nightlatch
anti-thrust bolt rollerbolts
Deadlock
Lock No.
151F 191F115F116F117 484132F
Features
BS EN 12209
marked
Bolt projection (mm)
Double-throw, Single-throw, Double-throw, Double-throw, Double-throw,
20
10
2020
20
Backset D (mm)
55, 60
55, 60
55, 60
55, 60
55, 60
55, 60
55, 60
Forend widths (mm)
20 202020202020
Latch and bolt position
Central CentralCentralCentralCentralCentral
BS EN 12209
marked
BS EN 12209
marked
BS EN 12209
marked
DIN 18251-1,
Class 3
DIN 18251-1,
Class 3
BS EN 12209
marked
Central
Forend designs
Square ends
●
●
●
●
●
●
Radiused
●
●
●
●
●
●
Satin-brushed stainless steel
●
●
●
●
●
●
●
For Europrofile cylinders
● ●
●
●
●
Forend finishes
For bathroom/WC, bolt projection 10 mm
●
Complete with
strike plate and screws
●
Page
6 677789
●
●
●
●
●
●
4
DORMA
THE LOCK RANGE MORTICE LOCKS
DORMA locks – unique
design features combined
with manufacturing quality of
the highest standard
Mortice escape locks
Mortice locks for narrow-stile doors
Contract series
Mortice
9mm sashlock & Mortice latch Follower
Emergency
W.C. sashlock & deadlock
lock
escape lock
Lock with
Emergency
Lock with
roller catch
escape lock
latch and bolt and bolt
Deadlock
Latch
752F/790F515F/532F
180
181182952.0 985.0917.0 936.0
BS EN 12209
marked
BS EN 12209
marked
DIN 18250
EN 179
BS EN 12209
marked
DIN 18250
EN 179
DIN 18251-2, DIN 18251-2, DIN 18251-2, DIN 18251-2,
Class 3 Class 3 Class 3 Class 3
Double-throw, 20 Double-throw, Double-throw, Double-throw, Double-throw, Single-throw, Single-throw, Single-throw,
Single-throw, 10*20
22
22
22
20
20
20
55
55
55
55
55
40, 45
25, 30, 35, 25, 30, 35, 25, 30, 35,
40, 45
40, 45
40, 45
25, 30, 35,
2020
20202024
24
2424
Central
Central
LH or RH
LH or RH
LH or RH
Central
Central
Central
Central
●
●
●
●
● ●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●*
●
10
10
11
11
11
12
13
14
15
*790F
DORMA
5
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
PREMIER SERIES - PROJECT LOCKS
—
Backsets D (mm)
55, 60
151F
Mortice Sashlock for
Europrofile cylinders
Night Latch Function
Follower-to-Keyway centres 72mm
Forend widths (mm)
20
Forend designs
–Radiused
– Square ends
191F
Mortice Bathroom/WC Lock
8mm turn follower
Follower-to-turn follower
centres 78mm
Forend finish
­–Satin-brushed
stainless steel
45
24
19
18
R
5
165
5
0,
R0
R
,5
119
1
54
5
0,
R
0,
9
5
10
1,5
45
2
82
R1
7
DORMA
"X"
R
38
R 40
5
R
6
9
0,
1
36,5
,5
14
R0
R
Features
– Galvanised steel lock case,
bronze bushed
– Latch bolt
nickel-­plated brass
– Nickel plated brass
deadbolt with anti-drill
steel rollers
– Sashlock bolt projection,
double throw, 20mm
– Bathroom/WC lock
bolt projection, single
throw, 10mm
– 8 mm heavy sprung square
follower
– Special bronze-bushed,
self-adjusting clamp ­follower
for rattle-free lever handles
–Maintenance-free,
pre-lubricated
silent-pattern latch
– Through-bolt protection
sleeves for holes for
standard fixings
– Technical Specification to
BS EN 12209, CE marked
and CERTIFIRE approved
–Non-handed
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
Backsets D (mm)
55, 60
115F
Mortice Latch
Forend widths (mm)
20
116F
Forend designs
–Radiused
– Square ends (except 117)
Mortice Nightlatch for
Europrofile cylinders
Follower-to-Keyway
centres 72mm
Forend finish
­­– Satin-brushed stainless
steel
117
90º
X8
X5.5
Mortice Nightlatch with
anti-thrust bolt for
Europrofile cylinders
Follower-to-Keyway
centres 72mm
11
7
98
12
85
41
32
63
38
165
235
7
21.5
46
8
209
10
3
D
20
24
30
15.2
Features
– Galvanised steel case,
bronze bushed
– Latch bolt nickel-plated
brass
– 8 mm heavy sprung square
follower
– Special bronzed-bushed,
self-adjusting clamp
­follower for rattle-free lever
handles
–Maintenance-free,
pre-lubricated
silent-pattern latch
– Through-bolt protection
sleeves for holes for
standard fixings
– Technical Specification:
115F and 116F to
BS EN 12209, CE marked
and CERTIFIRE approved,
117 to
DIN 18251-1 Class 3
–Non-handed
DORMA
7
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
PREMIER SERIES - PROJECT LOCKS
—
Backsets D (mm)
55, 60
484
Mortice Rollerbolt Lock
for Europrofile cylinders
Forend widths (mm)
20
Forend design
– Square ends
35
8
90°
Forend finishes
–Satin-brushed stainless
steel
13
Features
– Galvanised steel lock case
– Roller bolt of brass,
adjustable
– Nickel-plated brass
deadbolt with anti-drill
steel rollers
– Bolt projection,
double-throw, 20 mm
– Forend in centre,
non-handed
– Technical Specification:
DIN 18251-1
10
14
20
165
21,5
37
235
25
32
63
7
8
72
10,1
38
90°
9
9
33,7
6
17,2
6,1
10,2
24
3
30
13,5
D
8
DORMA
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
Backsets D (mm)
55, 60
132F
Mortice Deadlock for
Europrofile cylinders
Forend widths (mm)
20
Forend design
–Radiused
– Square ends
X8
90º
X5.5
Forend finish
–Satin-brushed stainless
steel
63
85
98
6.5
46
21.5
165
6.5
37
8
72
10
209
20
17.2
33.7
7.5
3
X9
90º
7
10.2
38
3
D
20
30
(24)
15.2
235
38
35
Features
–Galvanised steel case
–Nickel plated brass
deadbolt with anti-drill
steel rollers
– Bolt projection,
double-throw, 20 mm
– Through-bolt protection
sleeves for holes for
standard fixings
– Technical Specification
to BS EN 12209,
CE marked and CERTIFIRE
approved
–Non-handed
132.0
DORMA
9
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
CONTRACT SERIES
—
Backset (mm)
55
752F
Forend widths (mm)
20
Mortice Sashlock for
Europrofile cylinders
Night Latch function
Follower-to-Keyway centres 72mm
Forend designs
­­– Radiused
­­– Square ends
790F
Mortice Bathroom/WC Lock
8mm turn operated follower
Follower-to-turn follower
centres 78mm
Forend finish
–Satin-brushed stainless
steel
515F
Mortice Latch
532F
Mortice Deadlock for
Europrofile cylinders
45
24
19
18
R
5
0,
"X"
45
38
R
1
36,5
,5
9
R0
14
Features
–Galvanised steel lock case
–Latch bolt nickel-plated
steel
–Nickel plated steel
deadbolt with anti-drill
steel rollers
–752F/532F lock bolt
projection, double throw,
20mm
–790F lock bolt projection,
single throw, 10mm
–8 mm heavy sprung
square steel follower in
drawn steel bushes
–Maintenance-free,
pre-lubricated
silent-pattern latch
–Holes for standard fixings
– Technical Specification
to BS EN 12209,
CE marked and
CERTIFIRE approved
–Non-handed
R 40
82
R1
2
R
5
165
5
0,
R0
R
,5
119
1
5
0,
54
R
7
R
0,
9
5
32
17
10
13
52
35
1,5
10
46
8
8
38
72
165
21,5
49
235
12
8
13
20
38
20
24
30
– 0,5
15,5
D
10
DORMA
THE LOCK RANGE MORTICE LOCKS FOR TIMBER DOORS
MORTICE ESCAPE LOCKS
—
180
Mortice Sashlock for
Europrofile cylinders
9mm square follower
Night Latch Function
Follower-to-Keyway
centres 72mm
181 - External function
Key retracts the latchbolt and
deadbolt
181
182 - Internal function
(Emergency escape side)
Operation of the lever handle
retracts the latch and the
projected bolt
Mortice Escape Lock for
Europrofile cylinders
9mm square follower
Follower-to-Keyway
centres 72mm
EN179
182 - External function
Lever retracts the latchbolt,
key retracts the deadbolt
182
Mortice Escape Panic Lock
for Europrofile cylinders
9mm split follower
Follower-to-Keyway
centres 72mm
EN179
Forend widths (mm)
20
Forend designs
­– Radiused
– LH or RH
Illustration shows LH/ISO6 lock
(Mirror image applies for RH/ISO5 lock)
90º
X10
X6
Forend finish
­­­­– Satin-brushed stainless
steel
3 (6)
10
85
98
12
46
63
45
32
38
9
165
21.5
37
72
209
10
17.2
8
90º
33.7
7
8
35
11
10.2
38
3
D
20
33
(24)
15.5
X9
3.3
(6.3)
14
235
14
22
7
Backsets D (mm)
55
181 - Internal function
(Emergency escape side)
Operation of the lever handle
retracts the latch and the
projected bolt
1 (4)
Features
– Galvanised steel lock case
– Latch and bolt of
nickel-plated steel
– Bolt projection, 180 and
181 have a 9mm Square
follower
– 182 has a 9mm ‘Split’
follower
– Specifications to
DIN 18250 for fire and
smoke check doors
– Technical Specification:
180 to BS EN 12209,
CE marked
– 181/182 to BS EN 179,
CE marked and CERTIFIRE
approved
180.0
DORMA
11
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LOCKS WITH LATCH AND BOLT
—
Features
– Lock case, zinc-plated
– Latch and bolt
nickel-­plated
– Bolt projection,
single-throw, 20 mm
– Bolt with anti-saw
protection
– 8 mm square follower
– With night latch function
– Technical Specification:
DIN 18251-2 Class 3
–Non-handed
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
­­– Satin-brushed stainless
steel
Forend design
­­– Square ends
Special designs
–Bolt projection 15 mm
12
DORMA
952.0
Mortice Sashlock for
Europrofile cylinders
Night Latch function
Follower-to-Keyway
centres 92mm
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LOCKS WITH ROLLER CATCH AND BOLT
—
Backsets D (mm)
25, 30, 35, 40, 45
985.0
Mortice Rollerbolt Lock for
Europrofile cylinders
Forend width (mm)
24
Forend finish
– Satin-brushed stainless
steel
90º
X10
X5.4
Forend design
– Square ends
36
17
221
92
20
8
90º
3
D
24
15
15.5
X10
48
178
147
245
168
48.5
180
6-15
36
Features
– Lock case zinc-plated
– Adjustable roller catch and
bolt, nickel-plated
– Bolt projection,
single-throw, 20 mm
– Bolt with anti-saw
protection
– Technical Specification:
DIN 18251-2
–Non-handed
985.0
DORMA
13
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
DEADLOCKS
—
Features
– Lock case zinc-plated
– Bolt nickel-plated with
anti-saw protection
– Bolt projection,
single-throw, 20 mm
– Technical Specification:
DIN 18251-2
–Non-handed
917.0
Mortice Deadlock for
Europrofile cylinders
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
­– Satin-brushed stainless
steel
90º
X10
X5.4
Forend design
­­– Square ends
8
112
90º
X10
157
181
48
36
81
105
117
20
D
24
15
15.5
3
917.0
14
DORMA
THE LOCK RANGE MORTICE LOCKS FOR NARROW-STILE DOORS
LATCH LOCKS
—
Features
– Lock case zinc-plated
– Latch nickel-plated
– 8 mm square follower
– Technical Specification:
DIN 18251-2
–Non-handed
936.0
Mortice Latch
Backsets D (mm)
25, 30, 35, 40, 45
Forend width (mm)
24
Forend finish
–­­ Satin-brushed stainless
steel
90º
X10
X5.4
Forend design
­­– Square ends
14
128
154
54.5
170
34
87.5
100.5
108.5
11
8
3
24
15
14
19
D
936.0
DORMA
15
DORMA UK Limited
Wilbury Way
Hitchin
Hertfordshire
SG4 0AB
Tel: 01462 477600
Fax: 01462 477601
E-mail:[email protected]
www.dorma-uk.co.uk
DORMA Ireland Limited
PO Box 1050
Maynooth
Co. Kildare
Tel: 01 295 8280
Fax: 01 295 8284
E-mail: [email protected]
www.dorma.ie