DYNAPAC Complete Range

The Full Range
Driven by innovation committed to customer performance
2
This is Dynapac
4
Competence Center
6
Planer Equipment
8
Paver Equipment
11
Compactasphalt®
12
Asphalt Rollers
14
Static Rollers
15
Dynapac Compaction
75 years of innovation
The art of lasting performance
From experience we know that listening to our customers is the best way to get input for future development.
At Dynapac, we always strive to find new ways and
better solutions. Productivity, performance, ergonomics
and environmental care are prioritized areas. But most
important is your satisfaction and success.
That’s why we keep spending efforts and resources
on development – and on knowledge transfer. Still, after
more than 75 years, the ability to take advantage of
change helps us to remain pioneers.
It’s no coincidence that you see Dynapac machines at
so many kinds of job sites. You’ll meet us working on
airport runways, racing tracks and bridges, as well as
on regular road construction projects.
Our knowledge and experience covers it all. The
diversity of applications also means that we have been
able to develop our routines for maintenance and
service to function flawlessly in real life.
Dynapac machines perform at the top of quality
standards. And at the same time they present uptime
and reliability at world-class levels. Our customers
benefit from this by increased productivity and by
becoming more competitive.
Analyzer
16
Soil Rollers
18
Light Equipment
20
Concrete Equipment
22
Dynapac Compaction
Optimizer
23
Parts & Service
1934
1941
1946
1958
1960
AB VIBRO-BETONG
FOUNDED IN
STOCKHOLM, SWEDEN
FACTORY OPENED
IN LJUNGBY,
SWEDEN
FACTORY
ESTABLISHED
IN THE USA
FACTORY OPENED
IN KARLSKRONA,
SWEDEN
FACTORY
ESTABLISHED
IN BRAZIL
Germany
Wardenburg
Lingen
Sweden
Karlskrona Ljungby
The result is what counts
Dynapac is one of the world’s most specialized and
experienced manufacturers of compaction and paving
equipment. Our ability to present an exceptional end
result is based on experience, engineering expertise,
and on numerous successful innovations. Within our
lean and target-oriented organization there are short
and straight paths between development, manufacturing and our worldwide service network. No wonder that
Dynapac is a winner when you compare performance,
life-cycle cost and overall profitability.
Come explore the world of Dynapac.
USA
San Antonio
France
St. Valéry
China
Tianjin
India
Nasik
Brazil
Sorocaba
1973
2001
2006
2007
2008
2009
NAME CHANGED
TO DYNAPAC
FACTORY
ESTABLISHED
IN CHINA
EXPANSION OF THE CHINESE
FACTORY. NEW FACTORY
ESTABLISHED IN THE USA
DYNPAC BECOMES A
PART OF THE ATLAS
COPCO GROUP
NEW FACTORY
INAUGURATED
IN INDIA
NEW DISTRIBUTION
CENTER IN BELGIUM
AND IN THE USA
3
competence center
DY
A
C CAM
A
P
I
N
IN
M
A
Dynapac Campus training academies offer high quality
training courses and seminars to customers worldwide.
Well trained operators and service technicians are essential
in order to get the best possible result and to extend the lifetime
of your equipment. We can help you achieve this.
Y
TR
Dynapac Campus
P
US
N
Share our knowledge
G ACAD
A world of experience at your fingertips
In close cooperation with our customers, we have collected experience and knowledge for several
decades. In combination with test results and research, this constitutes a solid body of competence.
As an important part of our offer, all this knowledge is made available to our customers.
Our training programs include theory on materials, methods and applications, as well as practical
hands-on sessions in realistic work situations.
You are guided by trained and experienced experts, and we can guarantee that you’ll find our training
courses both inspiring and well worth the time and effort. Learn more at www.dynapac.com/training
E
Y
◄ Questions or comments
on paving and compaction?
The support service is always open to Dynapac
users. Ask us about any compaction problem at
[email protected]
Dynapac Competence Center (IHCC)
Our competence center is the hub in our support and training operations. Here we run
research studies as well as full scale compaction and paving tests. In addition we provide
end-user support on capacity calculations and choice of machine and method. Through
collaboration with governmental bodies and academic research institutes we keep up to
date with the latest developments in legislation, technologies and trends.
Hard facts in a software package
PaveComp will be your best friend in management of
asphalt jobs. It presents recommendations on screeds,
tractor units and rollers in order to to optimize the result
of your specific job.
A range of asphalt mixes are included in the program,
and compaction needs related to layer thickness are
considered. PaveComp automatically calculates rolling
speed, frequency, amplitude and number of passes to
reach the required density.
CompBase is a database containing compaction data
for Dynapac rollers and light equipment on seven different types of soil. Selecting soil type and machine will
give the required number of passes and time consumption for the desired degree of compaction.
planer equipment
Prepare for better results
Preparation sets the quality of the end result. Dynapac’s cold
planers combine precision and manoeuvrability with high
capacity and efficient functionality. Reduced noise, large power
reserves and a strong focus on the operator’s environment
and comfort have been the design cornerstones.
Compact Planer, PL350T
Compact Planers, PL500T/PL500TD
The three-wheel compact planer is ideal for
partial repairs of asphalt and concrete pavements, as well as removing of surfaces in buildings. Excellent manoeuvrability allows precision
cutting around manhole covers; the right fold-in
supporting wheel is for cost-effective cutting
alongside curbs or walls. The ballast weights are
removable which adds flexibility when using the
PL350T inside buildings.
The PL500 models are highly manoeuvrable,
hydraulically powered compact planers. A quick
release rear conveyor and a three- or four-wheel
drive unit with traction control are significant
features. The PL500 efficiently removes asphalt
pavements up to a cutting depth of 160 or 200
mm at 500 mm cutting width. By the superior
manoeuvrability, both models offer capacity
combined with precision, even for cutting around
manhole covers.
working width
◄
Compact Planers
Working
width (mm)
Rated
Power (hp)
350
100
Cummins B3.3-C60
60
PL500T
500
160
Cummins QSB 4.5-C110
110
PL500TD
500
200
Cummins QSB 4.5-C113
130
250 Cummins QSB 5.9-30-TAA
173
◄
1 000
Large Planers
Working
width (mm)
The PL1000RS is a highly manoeuvrable,
hydraulically powered medium-sized planer
with a quick release rear loading system. It has
a mechanically driven cutting drum and a fourwheel drive unit with anti-spin control system
(ASC). The planer is designed for cost effective
removing of road pavements on medium and
larger job sites. The cutting depth is up to
250 mm at a working width of 1000 mm.
Engine
PL350T
PL1000RS
Compact Planer, PL1000RS
Cutting
depth (mm)
Cutting
depth (mm)
Engine
Rated
Power (hp)
PL2000LS
2 010
320
Cummins QSX 15
600
PL2000S
2 010
320
Cummins QSX 15
600
PL2100S
2 100
320
Cummins QSX 15
600
Large Planers,
PL2000LS/PL2000S/PL2100S
PL2000/2100 are capable of removing asphalt and concrete across a profiling width of
2010/2100 mm at a maximum cutting depth of
320 mm. The planers are hydrostatically driven
by four steered track drives, and equipped with
a front discharge conveyor system. The cutting
drum is driven mechanically, by powered belts.
Practical standard equipment and a range of
options combined place these planers among
the most capable of cold planers.
◄ The operator in control
All Dynapac planer models offer
an excellent operator platform.
7
paver equipment
Pave the way for profitability
Dynapac has a long-earned reputation of outstanding reliability, uptime and end
result quality. We strongly believe that our real-life based engineering philosophy is
one of the main reasons. Powerful engines, advanced traction design and precision
steering are obvious highlights, and the finished surface is a powerful statement.
Wheeled pavers
Tracked pavers
Mobile feeders
Dynapac’s wheeled pavers are truly versatile. Proven
reliability from many years of operation in various applications makes it the ideal choice for urban roads. The
optional frontwheel drive with standard anti-spin system
can be engaged and disengaged by the driver and allows
the different amount of traction force required by the paver
(depending on the construction site) to be adapted to the
conditions of use.
Our tracked pavers are designed for no-compromise
operation. Long track drives enable maximum traction and
the crawler speed is electronically, and non-incrementally,
adjusted to any type of working condition. The tracks compensate for uneven ground level, and furthermore they are
sealed and lifetime-lubricated for minimum maintenance.
With a non-contacting element between transport vehicles and pavers, seamless and efficient finishing of any
surface becomes simple and trouble-free. The asphalt
mix is forwarded by a heat resistant rubber … via an automatically controlled and height adjusted conveyor belt
at the front of the feeder.
◄ Small Wheeled Pavers
Basic width (m)
F6W
F6-4W
◄
1.70
4.10
52
1.70
4.10
52
Medium Wheeled Pavers
Basic width (m)
F121-WD
F121-4W/D
F121-6W/D
F141-WD
F141-4W/D
F141-6W/D
◄
Max work. width (m) Rated output (kW)
5.80
120
2.55
6.60
120
2.55
7.30
120
2.55
6.60
140
2.55
7.30
140
2.55
8.10
140
Large Wheeled Pavers
Basic width (m)
F161-W
F161-6W
F161-8W
Max work. width (m) Rated output (kW)
2.55
◄ Small Tracked Pavers
Basic width (m)
F4C
F5C
F5CS
F6C
1.20
3.10
33
1.20
3.10
33
1.20
3.10
45
1.70
4.40
52
◄ Medium Tracked Pavers
Basic width (m)
F121C
F141C
F141CR
8.20
120
2.55
9
140
2.55
9
145
◄ Large Tracked Pavers
2.55
7.30
153
2.55
8.10
153
2.55
8.80
153
F181C
F182CS
F300CS
◄
Mobile Feeders
MF250
MF300C
Hopper capacity (m3) Feed capacity (m3/h)
Max conveyor
feed capacity (t/h)
6
1440
3000
8.50
3000
5000
Max paving width (m) Rated output (kW)
2.55
Basic width (m)
Max work. width (m) Rated output (kW)
Max paving width (m) Rated output (kW)
Max paving width (m) Rated output (kW)
3
10
153
3
13.50
172
3
16
259
9
screeds
Go wide and smooth
Dynapac offers a range of screeds in widths up to 16 meters.
Stability is the hallmark of our screeds and the unique engineering concept offers the
benefit of efficiency in combination with an outstanding surface finish. A wide range of
screed types and widths makes it easy to find the perfect choice for any type of job.
Vario Screeds
Up to 9.70 meters of paving width can be handled efficiently by Dynapac’s telescopic screeds. A high degree
of stability is maintained by an advanced control system
for the hydraulics of the extendable sub-assemblies.
High compaction screeds
The High Compaction Screeds are designed to meet
the demands for operation in either high compaction or
standard mode of operation.
Final compaction is performed by an additional vibratory
compaction unit. This ensures an optimum degree of final
compaction at every paving condition.
Fixed screeds
For the really wide paving jobs the fixed screed is a
natural choice. Using a high-capacity tractor unit, the
fixed screed can be used to achieve working widths of
up to 16 meters. Stability and rigidity is, of course, crucial here and Dynapac is the safe and efficient choice.
Compactasphalt® –
a new quality level in paving
Increased lifetime expectancy, lower maintenance cost and significant road noise reduction. These are the main
benefits of our latest innovation, Compactasphalt ®.
Two layers laid simultaneously – hot on hot – give better interlocking and higher resistance to deformation.
At the same time you can save up to 50% on the top layer.
◄ The main advantages
• Noise reduction by 6 dB(A)
(when laying open structure asphalt)
The paving concept
The combination of increased lifetime and enormous
savings on top layer material makes Compactasphalt® a
real winner. The required machine is a high-performance
paver completed with two additional modules. The wearing course mix (orange) is conveyed by a mobile feeder
• Lower amount of mix in top layer (50% less)
into a second hopper on the paver. The basic paver
module can also be used for any other regular paving
job. For this purpose the additional modules have to be
removed. This can easily be done without using a crane.
• Increased life expectancy
• Better interlocking of the courses
• Higher deformation resistance
• Lower maintenance costs
11
asphalt rollers
A full range of profit-makers
For high-speed and optimized operation, Dynapac rollers can take you the distance.
A full range of vibratory and static rollers are designed to give you maximum performance,
durability and versatility, and get you right to your pre-specified densities smoothly and
efficiently. Over 50 years of world-leading compaction research, and 70 years of experience
on the ground, mean you can depend on the most innovative compaction know-how on earth.
Our extensive understanding of high-frequency applications and an internationally renowned
vibratory compaction concept help to ensure the ultimate in roller precision and maneuverability. To keep your project rolling on time and on budget, put our knowledge to work..
◄
Small vibratory rollers
Even though primarily designed for asphalt compaction, Dynapac’s smaller
rollers also perform well on base and sub-base courses. Several versions
are available, dual-drum drive and vibration as well as combi rollers with a
vibrating drum and four rubber wheels.
Double Drum Vibratory Rollers
Operating
mass (incl.
ROPS) kg
Drum
width,
mm
CC800
1 575
800
9.5
0.4
70
CC900
1 600
900
8.8
0.4
70
Static
linear load, Amplitude, Frequency,
kg/cm
Hz
mm
CC900G
1 340
900
7.4
0.4
70
CC900S
1 640
900
9.1
0.3/0.35
56/70
CC1000
1 685
1 000
8.4
0.35
70
CC102
2 350
1 070
11.0
0.5
57
CC122
2 600
1 200
10.8
0.5
58
CC142
3 900
1 300
15.0
0.5
52
CG223HF
7 500
1 450
25.9
0.7/0.2
54/67
CG233HF
8 200
1 450
28.3
0.5/0.2
54/68
CG333HF
8 600
1 680
25.6
0.5/0.2
54/68
CC224HF
7 700
1 500
25.7
0.7/0.3
48/67
CC334HF
8 600
1 730
24.9
0.5/0.2
48/67
CC234HF
8 100
1 500
27.0
0.5/0.2
48/67
CC324HF
8 100
1 730
23.6
0.7/0.3
50/67
CC424HF
10 500
1 730
30.9
0.8/0.3
51/67
CC524HF
11 600
1 950
30.3
0.8/0.3
51/67
CC624HF
12 600
2 130
30.0
0.8/0.3
51/67
CC722
16 780
2 130
40.0
0.7/0.4
48/48
◄ Combination Rollers
Operating
mass (incl.
ROPS) kg
Medium-sized vibratory rollers
Large vibratory tandem rollers
Roads, streets and industry sites – vibratory
tandem rollers in the range 7 – 9 tons act as the
reliable workhorses. Outstanding performance,
high precision and supreme operator comfort
ensure longer stints with sustained quality.
When capacity counts, Dynapac’s heavy-duty lineup delivers. Airfields and wide roads and streets are
the main applications for these class-leading rollers.
Up to 2.13 meters of drum width and a static linear
load of up to 40 kg/cm meet the toughest requirements in high-capacity asphalt compaction.
In fact, we build the heaviest asphalt roller in the world.
Drum
width,
mm
Static
linear load, Amplitude, Frequency,
kg/cm
Hz
mm
CC102C
2 300
1 070
10.6
0.5
57
CC122C
2 430
1 200
10.5
0.5
58
CC142C
3 750
1 300
14.8
0.5
52
CC224CHF
7 350
1 500
25.7
0.7/0.3
48/67
CC234CHF
7 800
1 500
27.0
0.5/0.2
48/67
CC324CHF
7 850
1 730
22.7
0.7/0.3
50/67 CC334CHF
8 300
1 730
24.9
0.5/0.2
48/67
CC424CHF 10 000
1 730
30.9
0.8/0.3
51/67
CC524CHF 11 100
1 950
30.3
0.8/0.3
51/67 CA150A
7 400
1 676
22.1
0.8/0.4
45/45
CA150AD
7 600
1 676
23.0
0.8/0.4
45/45
13
static rollers
Ready, steady, go
Static rollers
The CS142 is the perfect choice for finishing passes on larger jobs and for compacting
courses of up to 50 mm. It has the same static
linear load on all three drums and covers 2.1
meters.
Pneumatic tyred rollers
Dynapac offers a complete range of pneumatic
tyred rollers, suited for sealing as well as asphalt and soil compaction. 7 or 9 wheels and a
rolling width of up to 2.35 meters. The Modular
Ballast System, with a number of sealed ballast
containers, is available on selected models.
◄ Steel Drum Rollers
Operating
mass, kg
Static linear load,
(ballasted) kg/cm
Working
width, mm
CS142
11 000
60
2 100
CS142N
10 800
59
2 100
◄ Pneumatic Rollers
Operating
mass, kg
Ballasted operating
mass, kg
Working
width, mm
CP142
6 000
12 000/14 000
1 760
CP221
8 300
21 000
1 820
CP271
12 400
27 000
2 350
No more guesswork –
Dynapac Compaction Analyzer gives the hard facts
Even compaction over the entire area and documentation of the compaction work are fundamentals of groundwork and road
construction. With our tools for analysis you can monitor and document the parameters that set the standard.
Compaction Analyzer - Asphalt
Compaction Analyzer - Soil
Careful planning of the compaction
passes increases quality and saves
fuel. Dynapac DCA-A helps the operator ensure an even number of passes
over the entire area, and calculates
the optimized pattern with respect to
asphalt temperature. The data from the
on-board computer can be transferred
for further analysis and printing. For a
contractor it is a clear benefit to submit
clear and concise documentation of a
well-performed completed job.
Soil compaction can be complicated.
Depending on what’s underneath the base
or sub-base layer, the compaction result
can differ. The heart of the DCA-S is the
compaction meter, which provides the
Compaction Meter Value, representing the
stiffness of the soil. The DCA-S with the
optional DGPS-receiver provides accurate
positioning to the compaction measurement and the information is presented to
the operator in real time. At the same time
DCA-S stores the information as documentation of the compaction process.
The GPS-receiver
provides accurate
positioning of the roller
Two temperature
sensors constantly
monitor the asphalt
temperature
The pass-count and asphalt
temperature are presented in
real-time on the operator screen
providing vital information for a
successful compaction job.
Rear temperature sensor.
15
soil rollers
Getting the job done on time and on budget
Superior Compaction Performance
Soil compaction performance depends on many parameters. Static linear
load, vibration characteristics and drum dimensions are just a few of them.
But performance goes beyond the roller itself. Dynapac’s unique experience
is available to all our customers through the software tools we offer. And by
the range of programs at Dynapac Campus Training academy.
Dynapac´s proven safety
Safety is another top priority in all Dynapac products. Low center of gravity
and a thorough chassis design give rock-solid stability. The fail-safe brakes
and a safety switch in the operator seat reduce the risk of incidents while
working. And to protect the operator you can equip all models with roll-over
protection (ROPS) and protection against falling objects (FOPS).
Outstanding operator comfort
All Dynapac models offer excellent working conditions and comfort for the
operator. Powerful air conditioning and logical controls, with just the right feel
and feedback, completes the perfection of the operator’s environment.
A unique feature is the spin-around seat and steering module. With a full
180° movement any operation can be performed with full control and with a
minimum of physical effort.
◄ Single Drum Soil Compactors
Operating mass
Drum
width, mm (incl.ROPS), kg
CA134D/PD
CA144D/PD
CA150/D
CA150P/PD
4 550/4750
13 (15)*/-
1.7/1.5
4 800/5000
12,2/-
1.5/1.3
35
1 676
7000/7200
20.9/22.1
1.7/0.8
31/43
1 676
7400/7500
-
1.7/0.9
31/43
Compaction is the simplest and cheapest way to
increase the stability and load-bearing capacity of
a soil structure. Dynapac’s single drum soil compactors are available in a range of sizes – up to an
operating mass of 27 tons – for all types of soil
compaction. High degree of visibility and the option
of analysis and optimizing tools make these machines ideal for the quality-conscious contractor.
Dynapac’s range of vibratory rollers are used to compact all types of soil with the exception of rockfill. The
rollers are suitable for most types of road construction, airfields, dam construction, harbour projects and
industrial constructions.
Heavy-size vibratory rollers are used for a very wide
range of applications. A special version with a padfoot
drum is available for compacting cohesive soils.
CA252/D
CA262D/PD
CA302D/PD
CA362D/PD
CA402D
Amplitude,
Hi/low,
Frequency,
Hi/low, Hz
7 300
21.8
1.7/0.8
31/43
1 676
7550/7900
22.4/-
1.7/0.8/ 1.7/0.9
31/43
1 676
8900/9000
30/-
1.9/0.9/ 1.8/0.9
31/31
Static linear
load, kg/cm
Amplitude,
Hi/low,
Frequency,
Hi/low, Hz
2 130
10600/10800
28.2/29.1
1.7/0.8
33/33
2 130
12000/12200
-
1.6/0.8
33/33
2 130
11300/12700
29.1/- 1.7/0.8/1.6/0.8
33/33
2 130
12300/12500
31.9/32.9
1.7/0.8
33/33
2 130
12300/12500
36.8/38
1.7/0.8
33/33
Static linear
load, kg/cm
27.4/28.4
Amplitude,
Hi/low,
Frequency,
Hi/low, Hz
2 130
10240/10440
1.7/0.8
33/33
2 130
10700/12100
26.3/- 1.7/0.8/1.6/0.8
33/33
2 130
12700/12660
38/- 1.7/0.8/1.6/0.8
33/33
2 130
13200/13100
38/- 1.7/0.8/1.6/0.8
33/33
2 130
13 800
43.7
33/33
Static linear
load, kg/cm
1.7/0.8
Amplitude,
Hi/low,
Frequency,
Hi/low, Hz
2 130
15600/15800
49.3/- 1.8/1.1/1.7/1.0
29/33
2 130
18300/18500
56.3/- 1.8/1.1/1.7/1.0
29/33
2 130
20 600
Operating mass
Drum
width, mm (incl.cab), kg
CA512D/PD
CA602D/PD
CA612D/PD
CA702D/PD
Static linear
load, kg/cm
1 676
Operating mass
Drum
width, mm (incl.ROPS), kg
CA500D/PD
CA600D/PD
CA610D/PD
35
* with heavy front beam
Operating mass
Drum
width, mm (incl.cab), kg
Single Drum Soil Compactors
Frequency,
Hi/low, Hz
1 676
Operating mass
Drum
width, mm (incl.ROPS), kg
CA250/D
CA250P/PD
CA260D/PD
CA280/D
CA300/D
Amplitude,
Hi/low,
1 370
Operating mass
Drum
width, mm (incl.cab), kg
CA152
CA152D/PD
CA182D/PD
Static linear
load, kg/cm
66/-
Static linear
load, kg/cm
1.8/1.1
Amplitude,
Hi/low,
29/33
Frequency,
Hi/low, Hz
2 130
15700/15900
49.4/- 1.8/1.1/1.7/1.0
29/33
2 130
18 700
59.9/- 1.8/1.1/1.8/1.2
29/33
2 130
20 700
66/- 1.8/1.1/1.8/1.2
29/33
2 130
26 900
81.2/-
2.0/1.3
28/30
17
light equipment
Light-weight equipment
for heavy-duty purposes
Dynapac light-weight equipment ensures perfect end results in every application. Manoeuvrability, ergonomics and versatility are the hallmarks of our
smaller machines. When it comes to engineering quality and cost-efficiency
they share the same solid foundation of Dynapac research and experience
as our other product lines.
Rammers
Dynapac’s range of rammers is designed for compacting
cohesive soils, such as clay and silt but also sand and
gravel. They are ideal for small repair jobs and in narrow
confined areas, such as trenches or housing sites.
Forward Plates
Dynapac offers a full range of forward plates, specially
designed for compacting asphalt and granular soils.
They are ideal and economically perfect for small repair
and maintenance work, such as driveways and pathways, parking lots and backfilling in trenches.
Forward & Reverse Plates
Dynapac’s forward and reverse plates
constitute an economical alternative and
compliment to a roller. Being all-round
machines, they are specially designed
to compact soil in confined areas.
◄ Forward Plates
LF50
LF60
LF75
LF80
LF100
LF130
LX90
◄
Duplex Rollers
Trench Rollers
Duplex rollers are suitable for compacting thin layers
of granular soils and asphalt. They are mostly used
for small jobs, repair work and compaction in confined
areas. High vibration frequency and a powerful diesel
engine give impressive performance with regard to the
machine size.
The Dynapac LP8500 roller is the perfect choice for
compacting cohesive and granular soils in connection
with backfills, foundation work and similar projects.
With no overhang, the LP8500 is also well suited for
compaction work close to walls and other obstacles.
Plate width
mm
Frequency, Hz
Amplitude, mm
50 - 56
320
95 / 0.9
55 - 61
Asphalt
350
95 / 0.9
75 - 95
420/500
95 / 1.0
77 - 94
420
95 / 1.3
82 - 116
500
95 / 0.9
124 - 138
500
95 / 0.9
96
450
75 / 1.7
Operating
mass, kg
Plate width
mm
Frequency, Hz
Amplitude, mm
155 - 175
330/460
80 / 1.4
217 - 247
500
65 / 1.9
265 - 307
500
68 / 1.7
481 - 547
550/750/850
60 / 2.1
524
650
60 / 1.7
780
660
53 / 2.5
820
660
53 / 2.5
Operating
mass, kg
Plate width
mm
Force/blow,
kN
59/61
150/230
10
63/64
230/280
14.8
Forward and Reverse Plates
LG160
LG200
LG300
LG500
LG520
LH700
LH800
◄
Operating
mass, kg
Asphalt
Rammers
LT500
LT600
LT700
LT800
LT5000
LT6000
LT7000
Asphalt
Asphalt
73
280
18.6
83/84
280/330
21.4
60/62
150/230
10
67/68
230/280
14.8
77
280
18.6
◄ Duplex Rollers & Trench Compactors
LP6500
LP750
LP8500
Operating
mass, kg
Drum width
mm
Frequency, Hz
Amplitude, mm
658/678
650
61 / 0.45
953/979
750
63 / 0.5
1650
850
31 / 1.2
19
concrete equipment
Massive concrete benefits
Many of the ground-breaking innovations in
concrete treatment originate from Dynapac,
and as in all areas, innovation is in our blood.
Reliability, sustained performance and long
economical life are the fundamentals of our
engineering principles. Combined with invaluable
feedback from customers all over the world, this
helps us to maintain our position as a leading fullrange supplier.
◄ Beams & Screeds
BR
BM
BT90
Working width, m
Asphalt
Dynapac offers a wide range of poker vibrators: mechanical
(pendulum), high-frequency, pneumatic, electric built-in
frequency converter.
Vacuum treatment
Cutting and grinding
Dynapac covers most common concrete and asphalt
cutting applications with floor saw and powerful grinding
machines. The floor saw comes in a petrol or diesel version completed by a series of diamond disks.
Prior to trowelling, the concrete can be treated with the Dynapac
vacuum pump and suction mats vacuum treatment; a highly
efficient vacuum dewatering system which reduces the water
contents 20-25% and increases both compression and wear
resistance. The risk of concrete shrinkage is also lessened.
External vibrators
Vibrating beams
Submersible drainage pumps
Vibrating beams and modular screeds have an in-depth compaction effect on concrete slabs. Beams are double-profile electrically or petrol powered. Finishing beams for levelling without
rails or support are also available.
Trowels
From edgers to double ride-on trowels, including single trowels
in petrol or electrically powered versions. Dynapac offers an extensive range of trowels to fulfil all trowelling and finishing jobs.
Vibrators are available in electric versions for high,
medium or low frequency, completed by a series of pneumatic vibrators to cope with all pre-cast construction site
requirements.
The Weda line of dewatering submersible pumps
handles easily all the water you normally see on a
construction site. The wear resistance, light weight and
service friendliness are well-known design features.
Capacities up to 20,000 lit/min and 85 m head.
◄ Pokers
AA
AZ
AT
AY
AX
AN
SMART
Electric
3.25 - 6.25
Asphalt
BV20A
BV21C
BV30
Poker vibrators
Type of energy
3.25 - 10.50
Petrol
With sections up to 15 m
(electric, petrol),
up to 25 m (pneumatic)
Electric, petrol,
pneumatic
2
Electric
2
Petrol
1.8 - 4.2
Petrol
Dia, mm
Asphalt
Type of vibration
25 - 75
Pendulum
25 - 55
Pendulum
29 - 59
High Cycle
26 - 155
Pneumatic
40 - 65
High Frequency
25 - 90
High Frequency
25 - 65
Electronic
◄ Submersible drainage pumps
Max capacity
WEDA 10
WEDA 30N/L
WEDA 40
WEDA 50N/H/L
WEDA 60L/H
WEDA 70L/H
WEDA 90L/H
WEDA 100
WEDA WP300
WEDA 60S sludge
Max. head, m
Rated output, kW
600 l /min
16
1.0
1 400 l / min
23
2.0
1 500 l / min
20.5
3.0
3 300 l / min
42
4.7
2 900 l / min
52
7.5
4 700 l / min
72
11.8
6 300 l / min
85
26.5
20 200 l / min
41
54
275 l / min
11.5
0.5
1 000 l / min
24
7.5
21
Optimize instead of maximize
We all know that the whole idea
with compaction is to reach the
correct set of parameters for the
work in question.
There is no point in overdoing
anything – it only costs time and
fuel, without improving the final
result.
The Dynapac Compaction Optimizer,
DCO, is an innovative system based on
the well-proven compaction meter. The
stiffness of the ground constitutes the
input value for the setting of amplitude
of the vibratory drum. The operator
has full control and every aspect of the
project benefits from this.
Soft ground
Hard ground
2
1
When the adjustable weight (2) is
rotated so that it goes to the position
shown in the picture above, there is
an amplitude of 100%.
(mm)
2
1
Amplitude (%)
Amplitude
(%)
Fuel
consumption
All the dynamic energy from the drum
can be absorbed by the ground.
22
Ready compacted ground
1
When the adjustable weight (2) is
rotated so that it is in the position
shown in the picture above, there is
an amplitude of 50%.
(mm)
2
Amplitude (%)
Amplitude
(%)
Fuel
consumption
The drum readjusts so that less
dynamic energy is supplied to the
ground from the drum.
When the adjustable weight (2) is
rotated so that it is in the position
shown in the picture above, forces
balance each other out, and the
resulting amplitude is 0.
(mm)
Amplitude (%)
Amplitude
(%)
Fuel
consumption
The drum is reset to a minimum of
vibrations.
parts & service
Taking your business to a higher level
People and organization –
Our competence: your benefit
Logistics and distribution –
Any time, any place
Dynapac Original Parts –
Protect your investment
Service Contracts –
Get peace of mind
Training –
From theory to practice
Technical support –
Making your daily life easier
The Dynapac service organization is established in 150 countries. We have more than
2700 service technicians, continuously trained
and updated on the latest product developments and service methods.
Available in three levels:
- Inspection plan – We support you
- CARE – We do it together
- Total Responsibillity plan – We do it for you.
Dynapac is part of the global Atlas Copco
distribution network. The world class logistics
organization that supports our service activities is unrivalled. Direct Daily Deliveries allow
original parts to be delivered to your doorstep
in time, wherever you are.
We provide service, operator and application
training close to you. See available training
courses on www.dynapac.com.
Dynapac original parts are manufactured to the
same high standards as your machine. The
quality and life-time of your Dynapac equipment
is ensured when all components are matched
perfectly! For you this means reduced operating
costs, fewer production stand stills, longer service
life and increased resale value.
A lot of useful information is available on www.
dynapac.com and through our different online
support systems. Find the right parts and kits
through or web-based parts system or download
technical documentation through our documentation system. For personal assistance, your local
Dynapac representative will be supporting you.
◄
visit us at dynapac.com
At Dynapac, we know that construction and road building are competence businesses. For decades we have
relentlessly collected data, information and knowledge in order to make it available to all our clients. At the end
of the day it is very simple – if we can help you improve your business, you will improve ours.
PMI 3492 0129 01
At dynapac.com you will find product descriptions and technical data for all products. Do not hesitate to get
in touch if you require additional information or simply want to ask us questions. Mail us or call your nearest
Dynapac representative. We are convinced that there is a lot more good business to be done. Together.