strain relief bushings

Transcription

STRAIN RELIEF BUSHINGS
Heyco invented the strain reliefÑthey
were the first and they're still the best.
In fact, Heyco's consistent high
standards and total quality commitment
have entitled them to become a part of
the CSA "Partnership Concept", allowing
them to self-certify the products they
manufacture.
Heyco strain reliefsÑcost-effective,
reliable protection. Don't settle for less
than the best. For detailed information
about these and other Heyco products,
ask us for the current Heyco catalogue.
STRAIGHT-THRU
Protect the lifeline of your electric
and electronic products by absorbing
the forces of pull, push and twist that
may be exerted on the flexible power
cord. These nylon strain reliefs securely
anchor, insulate and protect cables at
chassis entry points.
Available in both black and white for
flat or round cables. Sizes range from
mounting hole diameters of .375 up to
1.187, and with maximum chassis
thicknesses from .040 up to .281.
Providing the same protection for
your cable as the straight-thru, the right
angle strain relief allows the cable to
exit flush against the chassis, saving
space and directing the cable parallel to
the chassis. Excellent for use where
space is limited. Also acts as a back or
bottom bumper.
Available in black and white nylon for
flat and round cables. Mounting hole
diameters from .437 to 1.093, and
chassis thicknesses from .062 to .125.
Add reliability, longevity and safety to
your product. These are designed to
absorb flex in addition to forces of pull,
push and twist like a standard strain
relief. A flared "trumpet" exit prevents
sharp bending. Use in place of the pigtail, when space is at a premium.
Available in black and white nylon for
both flat and round cables. Mounting
hole diameters range from .375 to .625.
RIGHT ANGLE
BELL-MOUTH
10
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1
Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
STRAIN RELIEF BUSHINGS
CONTINUED
PIGTAIL™
Pigtail strain reliefs (one with an
integral nylon spring and the other with a
separate metal spring) offer the same
features as bell-mouths but are intended
for use where flex protection is critical.
The long spring section eases the cable
into a gentle curve, prohibiting sharp
bends and assuring the longest cable
and product life.
The all-nylon pigtail is available in
black and white, the nylon and metal only
in black. Both are only available for round
cable applications.
METAL
Made of plated steel, exclusively for
round cables. These absorb pull force
only (to help meet UL and CSA requirements). Easily assembled (with recommended hand pliers) to wire and cables
inside the chassis.
FOR EUROPEAN REQUIREMENTS
For those of you dealing with overseas
markets, Heyco also produces a variety
of strain reliefs suitable for meeting
European requirements.
CEE Series
USR Series
Fax: (416) 242-6819
11
SNAP AND SHORTY BUSHINGS
These nylon bushings convert rawedged holes to smooth, neat, insulated
ones. Special locking "fingers" allow the
bushings to snap into holes with fingertip
pressure. Mechanically protect, insulate,
and isolate telecommunications and
electrical cables, tubing, hose, rope,
utility lines, as well as low RPM shafts
and push-pull rods.
Snap bushings are available in 54 sizes
for use in 1/4" to 4" diameter holes.
Chassis thicknesses range from .040 to
.250. Stocked in both black and white
nylon. Three sizes are also available in
brass colour for lamp and lighting
applications.
Shorty bushings are used for limited
internal clearance (minimum 1/8")
applications. They all have a maximum
chassis thickness of .062. Available in
black or white nylon for 16 standard
mounting hole diameters.
OPEN/CLOSED BUSHINGS
A black nylon bushing that allows side
entry and encirclement of pre-assembled
harnesses, capillary tubes or other units
that have sections larger than the
bushing's ID. They can also be assembled
into holes that already contain cable or
tubing. Fingertip pressure snaps the
bushing into the mounting hole, forming a
complete circle and insulation barrier
against the raw edge of the chassis hole.
UNIVERSAL BUSHINGS
These bushings will absorb vibration,
cushion and insulate cables, tubing, hoses
or shafts. They feature flexible shutters
which adjust to accommodate and support
any shape from 1/8" to a maximum
diameter of 13/16". Easily locked into its
mounting hole with simple fingertip
pressure.
Stocked in six sizes of black nylon.
For detailed information on these
bushings and other Heyco products,
ask for our current Heyco catalogue.
12
Fax: (416) 242-6819
GRIPMASTER STRAIN RELIEFS
Provides reliable terminal protection for
all types of cord-equipped appliances and
instruments where space is limited and
high volume production is required.
The Gripmaster has a fiber insulating
material retained in a cold-rolled steel
frame. When applied, it forms a compact,
rugged ring that firmly grips the cord.
Part No.
Gripmaster
Gripmaster
Gripmaster
Gripmaster
#1
#2
#3
#6
Approx.
Wire Diameter
A
B
.250
.312
.187
.343
.187
.250
.125
.312
.343
.406
.281
.453
Minimum order 1000.
Gripmaster Hand Tool available (fits all sizes).
ARMOUR (ANTI-SHORT) BUSHINGS
Used at entrance to flexible metallic
conduit or armoured cable. Insulates and
protects electrical wires from being cut by
rough cut conduit ends. Chamfered leadin allows for fast installation. Also used in
holes through which ropes and steel
cables pass, to prevent chafing, cutting or
scraping, where bushing space is very
limited. Suitable for installation at temperatures as low as -40¡F.
Will Fit These
Armoured Cables
Fits Cable ID
A
Inside Dia.
AB0
14/2, 14/3, 12/2, 12/3
.29 -.33
23/64
AB1
14/4, 6/1, 4/1,
.33 -.42
13/32
AB2
12/4, 10/2, 10/3, 2/1
.43 -.57
17/32
AB3
10/4, 8/2, 8/3, 1/1
.58 -.72
47/64
Part No.
Minimum order 1000.
Standard colour: Red.
Fax: (416) 242-6819
13
GROMMETING
Use grommeting to protect tubes, wires
and cables from becoming frayed or cut by
sharp panel edges. Makes bushings for all
sizes and shapes of panel cutouts in sheet
metal, glass, wood panels or other sheetform materials. No tools required-just cut to
size and insert. Depending on the panel
thickness, grommeting may grip tightly by
itself, or it may need a touch of epoxy to
keep it in place.
EXTRUDED SERRATED POLYETHYLENE
Part No.
Max. Chassis
Thickness
H
W
T
GRPE
GRPE
GRPE
GRPE
40
52
62
85
.040
.052
.062
.085
.190
.190
.200
.200
.125
.125
.170
.162
.040
.040
.045
.045
GRPE
GRPE
GRPE
GRPE
100
125
187
250
.100
.125
.187
.250
.220
.220
.270
.280
.210
.205
.275
.370
.045
.050
.050
.050
Max. Chassis
Thickness
H
W
T
.040
.052
.062
.085
.100
.125
.187
.250
.190
.190
.200
.200
.220
.220
.270
.280
.125
.125
.170
.170
.210
.210
.272
.370
.040
.040
.045
.045
.045
.045
.048
.050
Minimum order 1 roll. Sold in rolls of 100 ft. only.
Standard colour: Natural PE.
CONTINUOUS SERRATED NYLON
Part No.
GR
GR
GR
GR
GR
GR
GR
GR
40
52
62
85
100
125
187
250
Minimum order 1 roll. Sold in rolls of 100 ft. only.
Standard colour: Black or natural white. Specify colour when ordering.
14
Fax: (416) 242-6819
HOLE PLUGS
DOME PLUGS
Close unneeded chassis holes. Moulded of black
nylon, these feature a convex, matte finish head that
tapers to a thin edge. Gives your product an uninterrupted, completed surface you can even paint over.
No tools required. Just a quick push locks these
firmly into chassis up to 1/4" thick.
Heyco has hole plugs for all occasions and in
virtually every size you'll ever need. Plug unwanted
holes, provide ventilation, allow viewing access, seal
against liquidsÐthese are just some of the things you
can do with our hole plugs.
For further information about hole plugs and other
Heyco products, ask for the most current Heyco
catalogue.
Part No.
Mounting
Hole Diameter
A
Head
Thickness
B
Head
Diameter
C
Overall
Height
Maximum
Chassis
Thickness
Minimum
Order
Qty.
DP187
DP250
DP312
DP375
DP437
.187
.250
.312
.375
.437
1/16
1/16
1/16
1/16
1/16
1/4
5/16
3/8
15/32
17/32
15/64
5/16
5/16
13/32
13/32
.062
.062
.062
.125
.125
1,000
1,000
1,000
1,000
1,000
DP500
DP562
DP625
DP687
DP750
.500
.562
.625
.687
.750
1/16
1/16
1/16
1/16
1/16
37/64
21/32
23/32
25/32
59/64
13/32
13/32
13/32
13/32
13/32
.125
.125
.125
.125
.125
1,000
1,000
1,000
1,000
1,000
DP812
DP875
DP1000
DP1093
DP1187
.812
.875
1.000
1.093*
1.187
1/16
1/16
1/16
1/16
1/16
57/64
1-1/64
1-13/64
1-7/32
1-5/16
13/32
29/64
29/64
29/64
29/64
.125
.125
.125
.125
.125
1,000
1,000
500
500
500
DP1250
DP1375
DP1500
DP1750
DP2000
1.250
1.375
1.500
1.750
2.000
1/16
1/16
1/16
1/16
5/64
1-3/8
1-1/2
1-43/64
1-29/32
2-9/64
29/64
29/64
29/64
29/64
15/32
.125
.125
.125
.125
.125
500
500
500
300
300
DP2.093
DP2.25
DP2.5
DP3.0
DP3.375
DP3.5
DP4.0
2.093**
2.250
2.500
3.000
3.375
3.500
4.000
7/64
7/64
7/64
7/64
7/64
7/64
7/64
2-1/4
2-27/64
2-23/32
3-11/64
3-21/32
3-21/32
4-5/32
3/4
3/4
3/4
3/4
3/4
3/4
3/4
.250
.250
.250
.250
.250
.250
.250
200
200
100
100
100
100
50
Standard colour: Black.
Other colours available at premium charge if quantities are sufficient.
34
Fax: (416) 242-6819
* can be used up to 1.125 diameter
** can be used up to 2.125 diameter
HOLE PLUGS
CONTINUED
SHORTY PLUGS
C
MAXIMUM CHASSIS
THICKNESS
Use when space inside the panel is a
problem. Shorty plugs have a limited
(1/8Ó) protrusion inside the panel. They
have a matte finish head tapering to a
thin edge for a smooth finished look.
Quickly and easily installed.
A
Mounting
Hole Diameter
A
Head
Thickness
B
Head
Diameter
C
Overall
Height
Maximum
Chassis
Thickness
SP218
SP281
SP312
SP343
SP375
.218
.281
.312
.343
.375
1/16
1/16
1/16
1/16
1/16
9/32
11/32
3/8
13/32
15/32
1/4
1/4
1/4
1/4
1/4
.062
.062
.062
.062
.062
SP406
SP437
SP468
SP500
SP531
.406
.437
.468
.500
.531
1/16
1/16
1/16
1/16
1/16
15/32
17/32
17/32
37/64
19/32
1/4
1/4
1/4
1/4
1/4
.062
.062
.062
.062
.062
SP593
SP625
SP750
SP781
SP875
.593
.625
.750
.781
.875
1/16
1/16
1/16
1/16
1/16
11/16
23/32
27/32
57/64
31/32
1/4
1/4
1/4
1/4
1/4
.062
.062
.062
.062
.062
Part No.
Minimum order 1000.
Standard colour: Black.
Other colours available at premium charge if quantities are sufficient.
Fax: (416) 242-6819
35
HOLE PLUGS
CONTINUED
VENT PLUGS
Just like a dome plug, but with holes
that permit air ventilation and heat
dissipation. It leaves you with an
attractive cover for unsightly or roughedged chassis holes. Twenty sizes for
use in 1/2" to 4" diameter holes. Quick
and easy installation with only fingertip
pressure.
ALSO AVAILABLE:
PRY OUT PLUGS
INSULATION PLUGS
PAPER TUBE PLUGS
The 1Ó to 6Ó polyethylene paper tube
plugs come with convenient fingerpull
tabs (one or two, depending on size),
and are 1/2" deep. Standard colour is
natural white. Other colours available
(minimum order 10,000).
36
The 8" to 12" diameters only come in
black high density polyethylene. They
have a wide flange for easy removal
from tubes, and are 1-1/4" deep.
Part No.
Fits Tube ID
Part No.
Fits Tube ID
TP 1000
TP 1250
TP 1375
TP 1500
1
1-1/4
1-3/8
1-1/2
TP 2750
TP 3000
TP 3500
TP 4000
2-3/4
3
3-1/2
4
TP 1750
TP 2000
TP 2250
TP 2500
1-3/4
2
2-1/4
2-1/2
TP 5000
TP 6000
TP 8000
TP 10000
TP 12000
5
6
8
10
12
Fax: (416) 242-6819
HOLE PLUGS
CONTINUED
DOUBLE “D” PLUGS
Got a strain relief hole where it shouldn't
be? Don't start again; just fill it with a double
"D" plug. These work for other chorded or
"DD" holes as well (holes punched or moulded
with two opposing flats). The convex, matte
finish head tapers to a thin edge, giving your
chassis a completed look. All sizes have a
head thickness of 1/16", and fit a maximum
chassis thickness of .125.
Part No.
Mounting
Hole Diameter
D
To Prevent
Rotation
B
Head
Diameter
C
Overall
Height
.437
.500
.562
.625
.750
.875
.390
.445
.530
.550
.625
.770
17/32
37/64
21/32
23/32
59/64
1-1/64
13/32
13/32
13/32
13/32
13/32
29/64
DD437-390
DD500-445
DD562-530
DD625-550
DD750-625
DD875-770
Minimum order 1000.
Fax: (416) 242-6819
37
HEYCO-FLEXª LIQUID TIGHT CONNECTOR/CONDUIT SYSTEM
HEYCO-FLEX I LIQUID TIGHT CONDUIT
This flexible, gray PVC, liquid tight
conduit is suitable for both indoor and
outdoor use. It resists corrosion, abrasion,
oil, water, acid, metal shavings and rough
environments. It also resists abuse, pull
and crushing. A smooth inside allows for
easier wire pulling, with no hazardous
sharp edges or burrs. It may be used with
both the Heyco nylon connectors and
metal connectors. Quickly installed and
easily cut with utility knife or PVC cutter.
Available in seven trade sizes, 3/8"
through 2".
HEYCO-FLEX II LIQUID TIGHT TUBING
The superior flexibility of this tubing
means it can be used in extremely tight
quarters. It's also ideal for fiber optic
cable protection. It resists corrosion, oil
and water and is made of black PVC.
Available in 1/4" through 2" trade sizes.
May be used with snap-in, straight or right
angle Heyco-Flex connectors.
HEYCO-FLEX NYLON CONNECTORS
No disassembly, no threading and the
complete conduit/connector system is
reuseable, too. The economical and smart
alternative.
Simply push the Heyco-Flex tubing or
conduit onto the connector ferrule, then
hand tighten the domed sealing nut.
(No disassembly means no lost parts).
No threading eliminates the possibility of
cutting the tubing/conduit and creating leak
paths. The tubing/conduit will not wind tight
onto the connector during assembly and
can be easily removed by pulling while
turning in a clockwise direction.
The Heyco-Flex nylon connectors resist
refrigerants, weak acids, gasoline, alcohol,
oil, grease and common solvents. Three
styles, straight, right angle and snap-in,
are available in either black or gray.
82
Fax: (416) 242-6819
LIQUID TIGHT FITTINGS FOR FLEXIBLE CORDS
All nylon construction with BUNA-N
compression gland resists salt water,
weak acids, gasoline, alcohol, oil, grease
and common solvents. Fittings install in
either clearance or threaded holes. Acme
threads prevent skipping and speed
installation. The domed sealing nut
resists snags and sheds contaminants.
An internal ratchet provides self-locking
against vibration.
Choose from two different styles:
Straight-thru or Pigtail. The Pigtail has a
flexible extender to prevent sharp bends,
extend cable life. Locknuts are included
with both styles on PG hubs only. To
order separately or for specifications,
see page 85.
Working temperatures: -22¡F (-30¡C)
to 212¡F (100¡C). For short periods to
302¡F (150¡C). Protection class IP 68 per
DIN 40050 up to 70 psi (5 bar) water
pressure.
STRAIGHT-THRU
INSTALLATION NOTE:
For optimum liquid tight
ness, use fitting with the
smallest maximum diameter that will still fit your
application.
Part No.
Black
Gray
Cable Dia.
Range
Min.Ð Max.
Thread
Type
& Size
A
Clearance
Hole
C
Max. O.A.
Length
D
Thread
Length
E
Wrenching
Nut Thick.
F
Wrenching
Flats
PG Hubs (locknuts included*)
3207
3444
3208
3445
.114 -.250
.064 -.210
Pg 7
.492
1.17
.33
.22
.59
3210
3446
3211
3447
.181 -.312
.069 -.187
Pg 9
.599
1.30
.34
.20
.75
3213
3448
3214
3449
.230 -.395
.069 -.260
Pg 11
.733
1.46
.39
.20
.86
3216
3217
.170 -.470
Pg 13.5
.804
1.53
.41
.20
.95
3219
3220
.230 -.546
Pg 16
.886
1.66
.45
.23
1.05
3222
3454
3223
3455
.450 -.709
.250 -.485
Pg 21
1.115
1.87
.52
.23
1.30
3225
3226
.590 -1.00
Pg 29
1.470
2.23
.59
.28
1.66
3204
3206
3205
3209
.866 -1.260
.787 -1.020
Pg 36
1.850
2.38
.50
.32
2.09
3212
3218
3215
3221
1.260 -1.496
.984 -1.220
Pg 42
2.125
2.36
.51
.33
2.36
3281
3283
3282
3284
1.457 -1.732
1.142 -1.378
Pg 48
2.335
2.40
.55
.33
2.56
For specifications or to order locknuts separately, see page 85.
Fax: (416) 242-6819
Continued
83
STRAIGHT-THRU CONTINUED
Part No.
Black
Gray
Cable Dia.
Range
Min.-Max.
Thread
Type
& Size
A
Clearance
Hole
C
Max. O.A.
Length
D
Thread
Length
E
Wrenching
Nut Thick.
F
Wrenching
Flats
NPT Hubs (locknuts not included*)
3228
3458
3229
3459
.181 -.312
.069 -.187
3/8 NPT
.670
1.49
.53
.20
.75
3200
3231
3201
3232
.230 -.546
.170 -.470
1/2 NPT
.875
1.83
1.72
.62
.20
.95
3460
3234
3461
3235
.250 -.485
.450 -.709
3/4 NPT
1.068
1.97
.63
.23
1.30
8437
8439
8438
8440
.590 -1.00
.472 -.787
1 NPT
1.375
2.42
.78
.28
1.66
Thread
Type &
Size
A
Clearance
Hole
C
Max. O.A.
Length
D
Thread
Length
E
Wrenching
Nut Thick.
F
Wrenching
Flats
*For specifications or to order locknuts separately, see page 85.
PIGTAILª
Part No.
Black
Gray
Cable Dia.
Range
Min.- Max.
PG Hubs (locknuts included*)
3237
3464
3238
3465
.114 -.250
.064 -.210
Pg 7
.492
2.44
.33
.22
.59
3240
3466
3241
3467
.181 -.312
.069 -.187
Pg 9
.599
2.77
.34
.20
.75
3243
3468
3244
3469
.230 -.395
.069 -.260
Pg 11
.733
3.44
.39
.20
.86
3246
3247
.170 -.470
Pg 13.5
.804
3.88
.41
.20
.95
3249
3250
.230 -.546
Pg 16
.886
4.36
.45
.23
1.05
3245
3478
3248
3479
.450 -.709
.250 -.485
Pg 21
1.115
5.03
.52
.23
1.30
*For specifications or to order locknuts separately, see page 85.
84
Fax: (416) 242-6819
Continued
PIGTAILª CONTINUED
Part No.
Black
Gray
Cable Dia.
Range
Min.- Max.
Thread
Type
& Size
A
Clearance
Hole
C
Max. O.A.
Length
D
Thread
Length
E
Wrenching
Nut Thick.
F
Wrenching
Flats
NPT Hubs (locknuts not included*)
3254
3474
3255
3475
.181 -.312
.069 -.187
3/8 NPT
.670
2.97
.53
.20
.75
3251
3252
.170 -.470
1/2 NPT
.875
4.09
.62
.20
.95
3239
3462
3242
3463
.450 -.709
.250 -.485
3/4 NPT
1.068
5.14
.63
.23
1.30
LOCKNUTS
Part No.
Thread Type
& Size
G
H
.265
.265
.265
.265
1.058
1.058
1.312
1.625
National Pipe Threads
NLN3/8NPT
NLN1/2NPT
NLN3/4NPT
NLN1NPT
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
Steel Conduit Threads per DIN 40430
NLNPG7
NLNPG9
NLNPG11
NLNPG13.5
NLNPG16
NLNPG21
NLNPG29
PG 7
PG 9
PG 11
PG 13.5
PG 16
PG 21
PG 29
.218
.218
.218
.250
.250
.281
.281
.750
.859
.937
1.062
1.171
1.406
1.812
Minimum order 100.
Fax: (416) 242-6819
85
NYLON PCB SUPPORTS/SPACERS
Provide spacing between the printed circuit
board and the chassis or between the circuit
boards. Wide ribbed wings produce a secure
fit with extra stability. Available in two
materials: natural nylon 6/6 (ASTM D-406682, flammability classification 94V-2) or flame
retardant (FR) white nylon (with a 94V-0
flammability classification).
There are two styles to choose from:
(1) chassis barb end plus tension barb end
for PCB; (2) chassis barb end plus locking
barb end for PCB.
Part No.
A
Spacing
B
Overall Length
tension
locking
3/16
7/8
53/64
3656
3686
tension
locking
1/4
15/16
57/64
3642
3672
3657
3687
tension
locking
3/8
1-1/16
1-1/64
3643
3673
3658
3688
tension
locking
7/16
1-1/8
1-5/64
3644
3674
3659
3689
tension
locking
1/2
1-3/16
1-9/64
3645
3675
3660
3690
tension
locking
5/8
1-5/16
1-17/64
3646
3676
3661
3691
tension
locking
3/4
1-7/16
1-25/64
3647
3677
3662
3692
tension
locking
7/8
1-9/16
1-33/64
3648
3678
3663
3693
tension
locking
1
1-11/16
1-41/64
3649
3679
3664
3694
tension
locking
1-1/8
1-13/16
1-49/64
3650
3680
3665
3695
tension
locking
1-1/4
1-15/16
1-57/64
3651
3681
3666
3696
tension
locking
1-3/8
2-1/16
2-1/64
Natural Nylon
FR Nylon
3640
3670
3655
3685
3641
3671
Barb Type
Minimum order 1000.
Barb Data
Type
Chassis
Tension
Mounting Data
Length
Chassis
or PCB
Mounting
Hole Dia.
Max. Chassis
or PCB Thick.
.200*
.400
Chassis
PCB
3/16
5/32
.070
.062
*Extension beyond a .070 thick chassis. Base barb wing spread is 35/64.
118
Fax: (416) 242-6819
CABLE TIES
CONTINUED
BEADED TIES
Releasable and reuseable ties for easy
binding, closing, bagging, holding and tying.
Available in two materials: polyethylene for
high flexibility and moderate strength, and
nylon for less flexibility and more strength
with high resistance to temperature and
chemicals.
Polyethylene ties are stocked in red and
Part No.
available in natural, black, blue, and yellow.
Nylon ties are stocked in natural and also
available in black. Please specify colour
when ordering.
An adhesive backed mounting platform
(Part No. MPBTA) is also available.
Moulded of natural nylon, it may also be
screw mounted.
Overall Length
Max. Bundle
Diameter
Tensile
Strength (lbs.)
Min. Order
Qty.
4-5/32
5
6-1/2
8-11/16
10-11/16
14
18
1-1/8
1-3/8
1-7/8
2-1/2
3
4
5
10
10
18
18
18
18
18
1,000
1,000
1,000
1,000
1,000
500
500
4-1/4
5-3/32
6-19/32
8-7/8
10-27/32
14
18
1-1/8
1-3/8
1-7/8
2-1/2
3
4
5
40
40
75
75
75
75
75
1,000
1,000
1,000
1,000
1,000
500
500
Polyethylene
4E
5E
6E
8E
10E
14E
18E
Nylon
4N
5N
6N
8N
10N
14N
18N
CABLE TIE MOUNTING PLATFORMS
Part No.
Mounting Style
Insertion Points
Screw Size
Base Size
MP4A-S
MP2A
MP2S
MP4A
MP4S
adhesive
adhesive (w/opt. screw mt.)
screw
adhesive (w/opt. screw mt.)
screw
4
2
2
4
4
Ñ
(6)
6
(6)
6
51/64 sq.
1-7/64 sq.
1-7/64 sq.
1-9/64 sq.
1-9/64 sq.
push mount
screw
screw
screw
2
2
2
2
Ñ
6-8
10
8
3/8 x 5/8 head
25/64 x 39/64
5/8 x 7/8
31/64 x 47/64
MPPM250*
MPS68
MPS10
MPLPM
Minimum order 500.
Colour: Stocked in natural white. Black available at an additional charge.
Fax: (416) 242-6819
* mounts into .250 diameter hole
125
HOSE CLAMPS
HOSERS (ACETAL TUBE AND HOSE CLAMPS)
Part No.
A non-metallic clamp that will not rust, is
non-conducting, not corroded by sea water
and is stable in a wide variety of chemical
salts, bases, alcohols, oil, grease, gasoline,
etc. Often used in place of stainless
clamps.
Can be applied by quick ratchet closure,
even after hose is in place. A lateral effort
disengages the clamp. A stand and a
pneumatic closing tool are aIso available.
Stocked in acetal. Black nylon, glassreinforced for outdoor or under the hood
applications also available at an additional
charge.
Diameter Range
Width
HO
HO
HO
HO
1
1.5
2
4
.228
.307
.351
.404
-.256
-.342
-.394
-.452
.148
.146
.231
.233
HO
HO
HO
HO
6
7
8
10
.449 -.511
.453 -.546
.513 -.586
.569 -.650
.233
.253
.231
.233
HO
HO
HO
HO
12
14
16
18
.616
.702
.746
.779
.234
.233
.232
.237
HO
HO
HO
HO
19
22
24
28
.859 -.989
.928 - 1.072
.985 - 1.135
1.123 - 1.296
.233
.234
.292
.288
HO
HO
HO
HO
32
34
36
38
1.218
1.338
1.472
1.594
-
1.405
1.566
1.724
1.862
.287
.292
.287
.291
HO
HO
HO
HO
42
50
60
70
1.729
1.999
2.259
2.536
-
2.021
2.277
2.582
2.881
.288
.291
.290
.288
HO
HO
HO
HO
76
80
90
100
2.839
3.144
3.506
3.871
-
3.206
3.562
3.922
4.395
.387
.388
.385
.394
-.707
-.801
-.848
-.899
Minimum order 100.
NYLON HOSE MATES™
170
Heyco has a full line of nylon hose
clamps. They are quick, easy to install
and tighten instantly with hand pliers.
These lightweight clamps resist salt,
water corrosion, weak acids, grease
and common solvents. Hose Mates™
can be removed without cutting, so
they are reuseable Ð both recyclable
and cost-effective!
Heyco Hose Mates™ are available
in seventeen popular sizes, from a
minimum diameter of 1/4" up to a
maximum diameter of 2-3/8". Cords
stocks them in black and white nylon,
and they are also available in glassfilled black or white nylon.
For your convenience, Heyco
LabKit No. 9 comes with a 115-piece
assortment of hose clamps in 12
popular sizes ranging from 11/32" to
1-5/8". Heyco LabKits are the perfect
answer for product design and
research departments. Each clear
plastic box contains an assortment of
the most popular part sizes, with
information mounted inside the box lid
describing the contents of each
compartment.
For detailed information on hose
clamps, LabKits and other Heyco
products, ask us for our current Heyco
catalogue.
Fax: (416) 242-6819
NYLON CABLE CLAMPS
Part No.
Black
White
Mounting
Hole Dia.
A
B
.170
1/8
3/16
1/4
5/16
3/8
7/16
1/2
.343
.378
.421
.441
.464
.500
.530
.203
1/8
3/16
1/4
5/16
3/8
7/16
1/2
.343
.378
.421
.441
.464
.500
.530
Light DutyÐ3/8" wide, .050 thick
3362
3363
3364
3365
3366
3367
3368
3312
3313
3314
3315
3316
3317
3318
3352
3353
3354
3355
3356
3357
3358
3302
3303
3304
3305
3306
3307
3308
Heavy DutyÐ1/2" wide, .060 thick
Don't forget to ask about Heyco LabKits Ð a
great idea for product design and research
departments. Each clear plastic box contains an
assortment of the most popular part sizes, with
information mounted inside the box lid that
describes the contents of each compartment.
For your convenience, Heyco LabKit No. 5
contains 285 cable clamps in 18 different sizes
(both light and heavy duty), for sizes of 1/8" to
1-1/2" diameter applications.
For further information about LabKits and
other Heyco products, ask us for the current
Heyco catalogue.
3372
3373
3374
3375
3322
3323
3324
3325
1/8
3/16
1/4
5/16
.384
.410
.437
.474
3376
3377
3378
3379
3326
3327
3328
3329
3/8
7/16
1/2
9/16
.500
.533
.553
.603
3380
3381
3382
3383
3330
3331
3332
3333
5/8
11/16
3/4
13/16
.625
.665
.699
.765
3384
3390
3392
3393
3334
3340
3342
3343
7/8
1
1-1/8
1-3/16
.795
.825
.940
.963
3394
3396
3398
3344
3346
3348
1-1/4
1-3/8
1-1/2
.980
1.045
1.114
.203
Recognized under the Component Program
of Underwriters Laboratory File #E-54523
Conform to the following Mil spec: Mil Std 24E, Mil C-21565 (NAS), Mil P-17091-B
Fax: (416) 242-6819
171

strain relief bushings

Transcription

Similar documents

team building at rinx

CTC Environmental Policy_April_2015_low-res

opusdei.ca

Welcome to 225 Fairglen Avenue

Downsview Heating Case Study - ESP 506.02 - Hi

view the feature sheet

Movato Kitchen Issue 2016

241 spadina avenue, toronto retail for lease

disastrous downtime or immortal enterprise?

Save today at these vendors.