T O O L T R A Y S

Designed to Fit Top of Powerbuilt Tool Chest Only.
Suggested for use in Small Drawer of Powerbuilt Tool Chest
110pc Bit & Socket Tray
8pc Punch and Chisel Tray
1/4” Dr (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm,
1/4”, 5/16” (Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm,
3/8” Dr (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm,
3/8”, 7/16”, 1/2” (Deep 6pt) 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm
1/2” Dr (12pt) 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm,
Parallel Punch 3/16”
Taper Punch 1/8”, 3/16”
Centre Punch 7/16”
Cold Chisel 3/8”, 1/2”, 5/8”
DB0802F
24mm, 27mm, 30mm, 32mm, 34mm, 36mm, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 15/16”, 1”
(Deep 6pt) 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm
1/2” Dr Deep Impact (6pt) 14mm, 17mm, 19mm, 21mm
Bit Sockets
3/8” Dr Hex 3mm, 4mm, 5mm, 6mm, 7mm , 8mm, 10mm
3/8” Dr Torx T-40, T-45, T-47, T-50, 1/2” Dr Torx T-55, T-60
Drive Accessories
1/4” Dr, 3/8” Dr, 1/2” Dr Quick Release Gear to Gear Ratchets (48T)
3/8” Dr x 5/8” Spark Plug Socket, 3/8” Dr x 13/16” Spark Plug Socket
1/4” Dr Spinner Handle, Coupler
Bits
Phillips #2 #3, Slotted 5, 6mm, Hex 5, 6mm, Torx T-10, T-15, T-20, T-25, T-30, T-40
Robertson S-2, Pozi #2
KBT2140F
38pc Gearless Ratchet Driver
and Bits Tray
Gearless Ratchet Driver
Hex Nut Driver 6mm, 8mm, 9mm, 10mm, 11mm,
3/16”, 1/4”, 5/16”, 3/8”, 7/16”
Bits (25mm) Phillips #0, #1, #2, #3,
Slotted 1/8”, 3/16”, 1/4”, 9/32”
Hex 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”,
Torx T-10, T-15, T-20, T-25, T-30, T-40
Bits (50mm) Phillips #1, #2,
Slotted 3/16”, 1/4”
Torx T-10, T-15
SB0185F
9pc Precision Screwdriver Tray
Phillips #00, #0, #1
Slotted 2.0, 2.4, 3.0
Torx T-8, T-10
SC0185F
94pc Socket, Driver & Accessory Tray
1/4” Dr Socket (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 1/4”, 5/16”
(Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
3/8” Dr Socket (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 3/8”,
7/16”, 1/2”, 9/16”, 5/8”, 3/4”,
(Deep 6pt) 10mm, 12mm, 13mm
1/2” Dr Socket (12pt) 14mm, 15mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm, 27mm,
30mm, 32mm, 34mm, 36mm 1/2”, 9/16”, 5/8”, 3/4”, 15/16”, 1”
(Deep 6pt) 14mm, 17mm, 19mm, 21mm
9pc Reversible Gear Spanner Tray
8mm, 10mm, 12mm, 13mm,
14mm, 15mm, 16mm, 17mm
WD1911HF
Drive Accessories 1/4” Dr, 3/8” Dr, 1/2” Dr Quick Release Gear to Gear Ratchets (48T)
3/8” Dr x 5/8” Spark Plug Socket, 1/4” Dr 75mm, 150mm Extensions, 3/8” Dr 75mm, 150mm,
250mm Extensions, 1/2” Dr 125mm, 250mm Extensions, 3/8” Dr x 283mm/11” Power Bar,
1/2” Dr x 430mm/17” Power Bar, 1/4” (M) x 3/8” (F), 3/8” (F) x 1/2” (M), 1/2” (F) x 3/8” (M)
Adaptors, 1/4” Dr, 3/8” Dr, 1/2” Dr Universal Joints, 1/4” Spinner Handle, Coupler
KBT2141F
19pc Combination
Ball End Hex Key Tray
TOOL TRAYS
1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm,
8mm, 10mm, 1/16”, 5/64”, 3/32”, 1/8”, 5/32”,
3/16”, 1/4”, 5/16”, 3/8”
WHT0055F
NOTE: Top trays have been designed to fit only in the top portion of a Tool Chest.
Top tray dimensions: 650mm (W) x 290mm (D)
14
Small tray dimensions: 167mm (W) x 250mm (D)
Suggested for use in Standard Drawer of
Powerbuilt Tool Chest
16pc Plier and Adjustable Wrench Tray
200mm/8” Linesman Plier, 200mm/8” Long Nose Plier,
39pc Socket Accessory Tray
1/4” Dr x 75mm/3”, 150mm/6”, 225mm/9” Extensions
3/8” Dr x 75mm/3”, 150mm/6”, 250mm/10” Extensions
1/2” Dr x 75mm/3”, 125mm/5”, 250mm/10” Extensions
3/8” Dr x 250mm/10”, 1/2” Dr x 430mm/17” Power Bars
175mm/7” Diagonal Plier, 250mm/10” Groove Joint Plier,
250mm/10” Curved Jaw Locking Plier, 150mm/6” Long Nose Locking Plier
150mm/6”, 200mm/8”, 250mm/10” Adjustable Wrenches
1/2” Dr Impact Driver, Impact Bits Phillips #2, #3, Slotted 5/16”, 3/8”
15mm/5/8” Nut Splitter
CGT0032F
3/8” Dr x 200mm/8”, 1/2” Dr x 250mm/10” Sliding T Bars
3/8” Dr (F) x 1/4” (M), 1/2” Dr (F) x 3/8” (M), 3/8” Dr (F) x 1/2” (M) Adaptors
1/4” Dr, 3/8” Dr, 1/2” Dr Universal Joints, 1/2” Dr Speed Brace
Ball End Hex Keys 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm,
1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”
KB3371F
31pc Plier, Hex Key and Adjustable Wrench Tray
200mm/8" Linesman Plier, 200mm/8" Long Nose Plier, 175mm/7" Diagonal Plier
250mm/10" Groove Joint Plier, 250mm/10" Locking Plier
200mm/8", 250mm/10” Adjustable Wrenches
1/2” Dr Impact Driver, Impact Bits Phillips #2, #3, Slotted 5/16”, 3/8”
22pc Hacksaw, Hammer and Circlip Plier Tray
Hacksaw, 15 Blades, 16oz Ball Pein Hammer, 175mm/7” Straight Nose Internal, Bent Nose Internal,
Ball End Hex Key Wrenches 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm,
1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”
PC5420F
Straight Nose External, Bent Nose External Circlip Pliers
CE2679HF
46pc Ring and Open End Spanner Tray
13pc Hacksaw, Hammer, Ruler and Knife Tray
Ring and Open End Spanners 6mm, 7mm, 8mm, 9mm, 10mm,
11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm
Hacksaw, 8 Blades, 16oz Ball Pein Hammer, 305mm/12” Steel Ruler, Utility Knife with blades
CJT5031F
1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 3/4”
Ignition Wrenches 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm
5/32”, 3/16”, 7/32”, 15/64”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”
TOOL TRAYS
WRT1420F
Standard tray dimensions: 570mm (W) x 250mm (D)
www.powerbuilttools.co.nz
15
25pc Ring and Open End Spanners and Screwdriver Tray
125pc 1/4” Dr, 3/8” Dr, 1/2” Dr
Complete Socket Set and Drive Accessories Tray
Ring and Open End Spanners 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm,
Pozi #2” x 4"
1/4” Dr Socket (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 1/4”, 5/16”
(Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm
3/8” Dr Socket (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm,
WC0190F
3/8”, 7/16”, 1/2”
17mm, 18mm, 19mm 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”
Screwdrivers Phillips #1” x 3", #2” x 4", Slotted 1/8” x 3", 1/4" x 1 1/2", 1/4" x 4", 5/16" x 6"
(Deep 6pt) 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm
1/2” Dr Socket (12pt) 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm,
24mm, 27mm, 30mm, 32mm, 34mm, 36mm 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 15/16”, 1”
(Deep 6pt) 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm
(Deep 6pt Impact) 14mm, 17mm, 19mm, 21mm
3/8” Dr Hex Bit Sockets 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
3/8” Dr Torx Bit Sockets T-40, T-45, T-47, T-50
1/2” Dr Torx Bit Sockets T-55, T-60
Drive Accessories 1/4” Dr, 3/8” Dr, 1/2” Dr Quick Release Gear to Gear Ratchets (48T)
3/16"
3/8” Dr x 5/8”, 13/16” Spark Plug Socket
PUNCH
1/2” Dr 125mm, 250mm Extensions
CHISEL
7/16"
1/4” Dr 75mm, 150mm Extensions, 3/8” Dr 75mm, 150mm, 250mm Extensions,
5/8"
3/8” Dr x 240mm/9-1/2” Power Bar, 1/2” Dr x 430mm/17”, 610mm/24” Power Bars
1/4” Dr, 3/8” Dr, 1/2” Dr Universal Joints
HEX WRENCH SET
3/8” Dr, 1/2” Dr 3-Way Adaptors
17pc Screwdriver Tray
1/4” Spinner Handle, Coupler, Bits (25mm) with holders
Phillips #0 x 75mm/3”, #1 x 75mm/3”, #2 x 38mm/1 1/2”,
KCT2369
Phillips #2, #3, Slotted 5mm, 6mm, Pozi #2,
Robertson #2, Hex 5mm, 6mm, Torx T-10, T-15, T-20, T-25, T-30, T-40
BITS
#2 x 100mm/4”, #2 x 200mm/8”, #3 x 150mm/6”
COUPLER
Slotted 1/8” x 75mm/3”, 3/16” x 100mm/4”, 1/4” x 38mm/1 1/2”,
T-45
CR-V
T-50
3/8"
7/16"
3/8"
7/16"
16
7mm
8mm
U-JOINT ADAPTER
36mm
19mm
18mm
34mm
17mm
15mm
32mm
14mm
13mm
30mm
12mm
19mm
27mm
24mm
22mm
21mm
20mm
1/2"
7/16"
1/2"
9/16"
3/4"
8mm
7mm
5/8"
9mm
10mm
16mm
5.5mm
5mm
7/8"
14mm
14mm
17mm
14mm
17mm
19mm
1"
5/16"
1/4"
19mm
Extra Deep Tray dimensions:
296mm (W) x 380mm (D)
3/16"
21mm
XD
#2
21mm
WST0299
#1
DEEP IMPACT SOCKETS
Torx T-10, T-15
15mm
Torx T-10, T-15, T-20, T-25, T-30, T-40
15/16"
T-15
11mm
11mm
T-10
10mm
6mm
8mm 9mm
4mm
6mm
1/4"
5/16"
17mm
5/8’’
3/16" 1/4"
Hex 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”,
Slotted 3/16”, 1/4”
18mm
POWERBUIL
3/8"
5/16"
18mm
1/4"
10mm
#00
3/16"
KCT2369
Tray Size :926mm(W) X 285mm(H)
TOOL TRAYS
19mm
10mm, 11mm,
3/16”, 1/4”, 5/16”, 3/8”, 7/16”
16mm
15mm
21mm
13/16’’
#0
14mm
POWERBUILT
2.0
12mm
Hex Nut Driver 6mm, 8mm, 9mm,
13mm
#1
Gearless Ratchet Driver
12mm
2.4
22mm
POWER BAR
24mm
T10
Gearless Ratchet Driver and Bits
Bits (50mm) Phillips #1, #2,
17mm
WST0299
3.0
Torx T-8, T-10
Slotted 1/8”, 3/16”, 1/4”, 9/32”
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm
14mm
13mm
12mm
10mm 11mm
T8
Slotted 2.0, 2.4, 3.0
Bits (25mm) Phillips #0, #1, #2, #3,
16mm
15mm
1/2" DR. RATCHET
CR-V
PRECISION SCREWDRIVER FOAM
Tray Size: 296mm(W) x 380mm(D) x 32mm(H)
Phillips #00, #0, #1
10mm
T-55
T-60
6’’
6’’
5’’
10’’
10’’
POWERBUILT
46pc Precision Screwdrivers,
Bit Driver and Assorted BitsWST0299
Tray/ 46PC GEARLESS RATCHET DRIVER & BITS AND
Precision Screwdrivers
BIT SOCKETS
T-47
POWERBUILT
SPINNER HANDLE
CR-V
POWERBUILT
3/8" DR. RATCHET
SD0403F
1/4" DR. RATCHET
Pozi #1 x 100mm/4”, #2 x 100mm/4”
3’’
Robertson #2 x 100mm/4”
3’’
EXTENSION BAR
1/4” x 100mm/4”, 1/4” x 150mm/6”, 5/16” x 150mm/6”, 3/8” x 255mm/10”
Extra Wide Tray dimensions:
926mm (W) x 285mm (D)