docSpecifications / International
download 
Report Transcription
Specifications / International
Zhafir Zeres Series ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-150 E-Mail: [email protected] www.zhafir.com NINGBO ZHAFIR PLASTICS MACHINERY CO., LTD No. 98 Guanhai Road, Chunxiao, Beilun, Ningbo, China 315800 Tel. +86-574-86182986 Fax. +86-574-86182977 E-Mail: [email protected] www.zhafir.cn Zhafir Partner: Specifications / International ZE 20160224-IV 400-6500kN Technical data ZE400 Machine dimensions ZE400 CLAMPING UNIT Clamping force kN 400 Toggle stroke mm 235 Min. mold height mm 150 Max. mold height mm 320 Max. mold opening stroke mm 555 Space between tie bars H×V mm 320×280 Min. mold dimension mm 205×180 Ejector stroke mm 60 Ejector force kN (tf) 9.8(1.0) mm 460×440 A BC Screw diameter mm 19 22 26 Screw L/D ratio L/D 20 20 17 Injection volume (theoretical)cm3 21 36 50 Injection weight (PS) g 19.1 32.8 45.5 rpm 400 Nozzle contact force Heating power g/s 3.8 kN (tf) kW 4.1 INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 8.8 9.8(1.0) 5.0 12×M12 L25 5.0 80 mm/s 200 g/s 50 68 96 Mpa 260 220 157 bar 2200 1570 Mpa 208 175 125 bar 2080 1750 1250 80h mm/s 350 g/s 90 121 169 Mpa 260 220 157 bar 2200 1570 Mpa 208 175 125 bar 2080 1750 1250 INJECTION UNIT Injection speed 6.0 2600 2600 unit: mm Ø60 70 210 A-A 24 Plasticizing capacity (PS) Platen dimensions ZE400 140 210 280 350 mounting plane of fixed platen top plane of fixed platen 14 Mold platen dimension H×V Screw speed unit: mm ZE400 14 11 OTHERS kW/A PressureMpa 14 FlowL/min 23 Oil tank L 45 Hopper capacity L 15 Machine dimension m 3.62×1.2×1.75 Machine weight t 2.8 Connection power 2 We reserve the right to make changes as a result of further technical advantages. 80:12/21.4 80h:19/34 (80h,80) 80h,80 3563 3 Technical data ZE600 Machine dimensions ZE600 CLAMPING UNIT unit: mm ZE600 Clamping force kN 600 Toggle stroke mm 270 Min. mold height mm 150 Max. mold height mm 370 Max. mold opening stroke mm 640 Space between tie bars H×V mm 370×320 Min. mold dimension mm 240×205 Ejector stroke mm 70 Ejector force kN (tf) 19.6(2.0) mm 545×505 Mold platen dimension H×V mounting plane of fixed platen top plane of fixed platen A BCAB C Screw diameter mm Screw L/D ratio L/D 19 22262226 30 20 2017202017.4 Injection volume (theoretical)cm3 21 36503658 78 Injection weight (PS) g 19.1 32.8 rpm 400 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g/s kN (tf) kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure mm/s Injection rate (PS) Injection pressure Holding pressure 33 52 unit: mm 70 400 3.8 6.08.86.08.8 13 14.7(1.5) 14.7(1.5) 4.1 5.05.05.36.8 6.8 80 120 200 200 g/s 50 68966996128 Mpa 260 220157280220 165 bar Mpa 208 175125220160 120 bar 2080 1750125022001600 1200 2600 2200 1570 2800 2200 1650 80h120h INJECTION UNIT Injection speed 45.5 Platen dimensions ZE600 mm/s 350 350 g/s 90 121169121169 225 Mpa 260 220157280220 165 bar Mpa 208 175125220160 120 bar 2080 1750125022001600 1200 2600 2200 1570 2800 2200 1650 OTHERS kW/A PressureMpa 14 14 FlowL/min 31 31 Oil tank L 68 68 Hopper capacity L 15 15 Machine dimension m 4.01×1.22×1.8 4.01×1.22×1.8 Machine weight t Connection power 4 80:12/21.4120:15.1/27 80h:19/34 120h:25/44.7 3.3 We reserve the right to make changes as a result of further technical advantages. (80h,80) (120h,120) 120h,120 80h,80 3.5 5 Technical data ZE900 Machine dimensions ZE900 CLAMPING UNIT Clamping force kN 900 Toggle stroke mm 320 Min. mold height mm 150 Max. mold height mm 410 Max. mold opening stroke mm 730 Space between tie bars H×V mm 420×370 Min. mold dimension mm 270×240 Ejector stroke mm 80 Ejector force kN (tf) 19.6(2.0) mm 615×570 Mold platen dimension H×V Screw diameter mm Screw L/D ratio mounting plane of fixed platen top plane of fixed platen A B C A B C AA A B C 22 26 30 26 28 30 26 28 32 36 L/D 20 20 17.4 21 21 19.6 21 21 2118.6 Injection volume (theoretical)cm3 36 58 78 58 67 78 61 70 100127 Injection weight (PS) 33 52 70 52 61 70 55 64 91116 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s kN (tf) kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 400 6.0 8.8 13 400 8.8 19.6(2.0) 5.3 6.8 6.8 11 13 7.8 7.8 unit: mm 400 8.8 11 16 22 19.6(2.0) 6.8 Platen dimensions ZE900 19.6(2.0) 5.4 7.5 8.0 8.0 120160210 mm/s 200 200 200 g/s 69 96 128 96 112 128 96 112 146185 Mpa 280 220 165 260 220 192 280 260 200160 bar 2200 1650 2600 2800 Mpa 220 160 120 160 138 120 224 206 160126 bar 2200 1600 1200 1600 1380 1200 2240 2060 16001260 2800 2200 1920 2600 2000 1600 120h160h210h INJECTION UNIT Injection speed unit: mm ZE900 mm/s 350 350 350 g/s 121 169 225 169 196 225 169 196 256324 Mpa 280 220 165 260 220 192 280 260 200160 bar 2200 1650 2600 2800 Mpa 220 160 120 160 138 120 224 206 160126 bar 2200 1600 1200 1600 1380 1200 2240 2060 16001260 2800 2200 1920 2600 2000 1600 OTHERS Connection power 6 kW/A 120:15.1/27 120h:25/44.7 160:17.5/31 160h:28/50 210:20/37 210h:31/55 PressureMpa 14 14 14 FlowL/min 31 31 31 Oil tank L 68 68 68 Hopper capacity L 15 15 25 Machine dimension m 4.24×1.29×1.91 4.24×1.29×1.91 Machine weight t 4.2 4.3 We reserve the right to make changes as a result of further technical advantages. 4.33×1.29×1.91 4.4 (210h,210) (160h,160) (120h,120) 210h,210 160h,160 120h,120 7 Technical data ZE1200 Machine dimensions ZE1200 CLAMPING UNIT Clamping force kN 1200 Toggle stroke mm 360 Min. mold height mm 150 Max. mold height mm 480 Max. mold opening stroke mm 840 Space between tie bars H×V mm 470×420 Min. mold dimension mm 305×270 Ejector stroke mm 100 Ejector force kN (tf) 29.4(3.0) mm 690×640 Mold platen dimension H×V mounting plane of fixed platen top plane of fixed platen A B C AAA BCAAAB CAB C 30 2628 323630 3236 403640 45 Screw diameter mm 26 28 Screw L/D ratio L/D 21 21 19.6 21 21 2118.621 22.520 1823.321 18.7 Injection volume (theoretical)cm3 58 67 78 61 70 100127102 116147 182173213 270 Injection weight (PS) 52 61 70 55 64 91 116 92 106134 166157194 246 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s kN (tf) Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 8.8 11 13 400 5.47.5 8.08.07.7 9.99.9 9.9 12.6 160 210 300 430 200 200 200 200 g/s 96 112 128 96 112 146185128 146184 228184228 289 Mpa 260 220 192 280260 200160280 253200 162247200 158 bar 2600 2200 1920 2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 Mpa 160 138 120 bar 1600 1380 1200 22402060 160012602240 20201600 130019701600 1260 mm/s 24.5(2.5) unit: mm 24.5(2.5) 224206 160126224 202160 130197160 126 160h 210h300h430h 350 350 g/s 169 196 225 169196 256324193 220277 342277342 434 Mpa 260 220 192 280260 200160280 253200 162247200 158 bar 2600 2200 1920 2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 Mpa 160 138 120 bar 1600 1380 1200 22402060 160012602240 20201600 130019701600 1260 mm/s Platen dimensions ZE1200 8.811 162212.81622 302230 42 6.8 7.8 7.8 kW Note:The above machine size does not apply to the 430 injection unit. 400 24.5(2.5) INJECTION UNIT Injection speed 400 400 24.5(2.5) INJECTION UNIT Injection speed unit: mm ZE1200 300 300 224206 160126224 202160 130197160 126 OTHERS Connection power kW/A PressureMpa 8 160:17.5/31 160h:28/50 210:20/37 210h:31/55 300:25.7/46 300h:36.7/65 430:32.3/57 430h:43.3/77 14 FlowL/min 52 52 52 52 Oil tank L 105 105 105 105 Hopper capacity L 15 25 25 25 Machine dimension m 4.85×1.36×1.99 4.85×1.36×1.99 4.93×1.36×1.99 5.24×1.36×1.99 Machine weight t 5.4 5.5 5.6 We reserve the right to make changes as a result of further technical advantages. 14 1414 (160h,160) (210h,210) (300h,300) 300h,300 210h,210 160h,160 6 9 Technical data ZE1500 Machine dimensions ZE1500 CLAMPING UNIT Clamping force kN 1500 Toggle stroke mm 420 Min. mold height mm 180 Max. mold height mm 520 Max. mold opening stroke mm 940 Space between tie bars H×V mm 520×470 Min. mold dimension mm 335×305 Ejector stroke mm 120 Ejector force kN (tf) 34.3(3.5) mm 770×730 Mold platen dimension H×V Screw diameter mm Screw L/D ratio L/D mounting plane of fixed platen top plane of fixed platen ABC AA ABC ABC ABC 283236 30 323640 364045 404550 21 2118.6 21 22.52018 23.32118.7 22.520 18 Injection volume (theoretical)cm3 70 100 127 102116147182 173 213 270 252 319 395 Injection weight (PS) 64 91 116 92 106134166 157 194 246 229 290 358 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s Injection rate (PS) Injection pressure Holding pressure kW 7.5 8.0 8.0 mm/s Injection rate (PS) Injection pressure Holding pressure 400 400 111622 12.8 162230 19.6(2.0) 223042 29.4(3.0) 29.4(3.0) Note:The above machine size does not apply to the 640 injection unit. Platen dimensions ZE1500 unit: mm 350 273950 29.4(3.0) 7.79.99.99.9 12.6 14.2 210300 430640 200200 200160 g/s 112146185 128 146184228 184228289 183231285 Mpa 260200160 280 253200162 247200158 253200162 bar 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620 Mpa 206160126 224 202160130 197160126 202160130 bar 206016001260 2240 202016001300 197016001260 202016001300 2600 2000 1600 210h300h430h640h INJECTION UNIT Injection speed 400 kN (tf) INJECTION UNIT Injection speed unit: mm ZE1500 mm/s 350 g/s 196256324 193 220277342 277342434 285360445 Mpa 260200160 280 253200162 247200158 253200162 bar 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620 Mpa 206160126 224 202160130 197160126 202160130 bar 206016001260 2240 202016001300 197016001260 202016001300 2600 2000 1600 300 300 250 OTHERS Connection power 10 kW/A 210:20/37 210h:31/55 300:25.7/46 300h:36.7/65 430:32.3/57 430h:43.3/77 640:39/69 640h:57/101 PressureMpa 1414 1414 FlowL/min 5252 5252 Oil tank L 105105 105105 Hopper capacity L 2525 2525 Machine dimension m 5.14×1.46×2.085.16×1.46×2.08 Machine weight t 7 We reserve the right to make changes as a result of further technical advantages. 7.1 5.47×1.46×2.085.67×1.46×2.08 7.3 (210h,210) (300h,300) (430h,430) 430h,430 300h,300 210h,210 7.7 11 Technical data ZE1900 Machine dimensions ZE1900 CLAMPING UNIT Clamping force kN 1900 Toggle stroke mm 470 Min. mold height mm 200 mounting plane of fixed platen top plane of fixed platen Max. mold height mm 550 Max. mold opening stroke mm 1020 Space between tie bars H×V mm 570×520 Min. mold dimension mm 370×335 Ejector stroke mm 130 Ejector force kN (tf) 44.1(4.5) mm 840×790 Mold platen dimension H×V A B C A B C ABC A BC 404550 455055 Screw diameter mm 32 3640 3640 45 Screw L/D ratio L/D 22.5 20 18 23.321 18.7 22.520 18 22.220 18 Injection volume (theoretical)cm3 116 147182 173213 270 252319395 334412499 Injection weight (PS) g 106 134166 157194 246 229290358 304375454 rpm 400 400 350 g/s 16 2230 kN (tf) 24.5(2.5) Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 2230 42 39.2(4.0) 273950 39.2(4.0) Platen dimensions ZE1900 unit: mm 354660 39.2(4.0) 9.9 9.9 9.9 12.6 14.2 19 300 430 640 830 200 200 160 160 g/s 146 184228 184228 289 183231285 231285346 Mpa 253 200162 247200 158 253200162 247200165 bar 2470 2000 1580 2530 2000 1620 2470 2000 1650 Mpa 202 160130 197160 126 202160130 197160132 bar 2020 1600 1300 19701600 1260 2020 16001300 1970 16001320 2530 2000 1620 Note:The above machine size does not apply to the 830 injection unit. 320 mm/s 300h430h640h830h INJECTION UNIT Injection speed unit: mm ZE1900 mm/s 300 300 250 g/s 220 277342 277342 434 285360445 362446594 Mpa 253 200162 247200 158 253200162 247200165 bar 2470 2000 1580 2530 2000 1620 2470 2000 1650 Mpa 202 160130 197160 126 202160130 197160132 bar 2020 1600 1300 19701600 1260 2020 16001300 1970 16001320 430:32.3/57 430h:43.3/77 640:39/69 640h:57/101 2530 2000 1620 250 OTHERS Connection power 12 kW/A 300:25.7/46 300h:36.7/65 830:47.5/85 830h:65/116 PressureMpa 141414 14 FlowL/min 707070 70 Oil tank L 135135135 135 Hopper capacity L 252525 50 Machine dimension m 5.77×1.57×2.185.77×1.57×2.185.98×1.57×2.18 6.19×1.57×2.18 Machine weight t 8.58.78.9 9.3 We reserve the right to make changes as a result of further technical advantages. (300h,300) (430h,430) (640h,640) 640h,640 430h,430 300h,300 13 Technical data ZE2300 Machine dimensions ZE2300 CLAMPING UNIT unit: mm ZE2300 Clamping force kN 2300 Toggle stroke mm 550 Min. mold height mm 220 Max. mold height mm 600 Max. mold opening stroke mm 1150 Space between tie bars H×V mm 620×620 Min. mold dimension mm 400×400 Ejector stroke mm 150 Ejector force kN (tf) 49(5.0) mm 920×920 Mold platen dimension H×V mounting plane of fixed platen top plane of fixed platen ABCABCAB CABC Screw diameter mm 3640454045504550 55505560 Screw L/D ratio L/D 23.321 18.722.520 18 22.220 18 22 2018.3 Injection volume (theoretical)cm3 173213270252319395334412 499471570678 Injection weight (PS) 157194246229290358304375 454428518617 29.4(3.0) kW 12.6 14.2 19 430 640 830 200 160 160 Injection rate (PS) Injection pressure Holding pressure mm/s Injection rate (PS) Injection pressure Holding pressure 49(5.0) 49(5.0) unit: mm 54(5.5) 36×M20 L45 23.4 1100 184228289183231285231285 346285346411 Mpa 247200158253200162247200 165218 180 151 bar 2470 Mpa 197160126202160130197160 132194160134 bar 19701600126020201600130019701600 1320194016001340 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 400 100 12×Ø38 160 g/s Ø200 1510 Ø100 430h640h830h1100h INJECTION UNIT Injection speed Platen dimensions ZE2300 320 2230422739503546 60466071 kN (tf) INJECTION UNIT Injection speed 320 mm/s 300 250 250 250 g/s 277342434285360445362446 594446540642 Mpa 247200158253200162247200 165218180151 bar 2470 Mpa 197160126202160130197160 132194160134 bar 19701600126020201600130019701600 1320194016001340 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 140 280 420 560 700 A-A 36 Heating power g/s 350 140 280 420 560 700 Nozzle contact force 400 22 Plasticizing capacity (PS) rpm 400 100 Screw speed g Note:The above machine size does not apply to the 1100 injection unit. 25 16 1510 OTHERS Connection power 14 kW/A 430:32.3/57 430h:43.3/77 640:39/69 640h:57/101 830:47.5/85 830h:65/116 1100:51/92 1100h:73.2/130 PressureMpa 14 14 14 14 FlowL/min 80 80 80 80 Oil tank L 135 135 135 135 Hopper capacity L Machine dimension m 6.4×1.73×2.3 6.4×1.73×2.3 6.43×1.73×2.3 Machine weight t 11.3 11.5 11.8 25 2550 50 We reserve the right to make changes as a result of further technical advantages. 6.77×1.73×2.3 (430h,430) (640h,640) (830h,830) 830h,830 640h,640 430h,430 12.6 15 Technical data ZE3000 Machine dimensions ZE3000 CLAMPING UNIT ZE3000 Clamping force kN 3000 Toggle stroke mm 600 Min. mold height mm 240 Max. mold height mm 650 Max. mold opening stroke mm 1250 Space between tie bars H×V mm 720×720 Min. mold dimension mm 470×470 Ejector stroke mm 150 Ejector force kN (tf) 58.8 (6.0) mm 1040×1040 Mold platen dimension H×V unit: mm ABCABCAB CABC Screw diameter mm Screw L/D ratio 4550555055605560 65606570 L/D 22.220 18 22 2018.321.820 18.521.6 2018.6 Injection volume (theoretical)cm3 334412499471570678617735 8637929291078 Injection weight (PS) 304375454428518617562668 785720845980 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s kN (tf) kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 54 (5.5) 54 (5.5) 54 (5.5) unit: mm 54 (5.5) 19 23.4 27.8 32 1100 1400 1700 160160160 160 g/s 231285346285346411346411 483411483560 Mpa 247200165218 180 151 214180 153210180155 bar 2470200016502180 18001510 21401800 1530210018001550 Mpa 197160132194160134190160 136187160138 bar 19701600132019401600134019001600 1360187016001380 830h mm/s Platen dimensions ZE3000 3546604660715670 81607085 830 mm/s INJECTION UNIT Injection speed 320320300 250 Note:The above machine size does not apply to the 1700h and 1700 injection unit. 1100h 1400h 1700h 250250250 250 g/s 362446594446540642540642 754642754875 Mpa 247200165218 180 151 214180 153210180155 bar 2470200016502180 18001510 21401800 1530210018001550 Mpa 197160132194160134190160 136187160138 bar 19701600132019401600134019001600 1360187016001380 OTHERS kW/A 830:47.5/85 830h:65/116 PressureMpa 14 Connection power 16 1100:51/92 1100h:73.2/130 14 1400:56/101 1400h:76.8/138 14 1700:72/129 1700h:95/168 14 FlowL/min 100 100 100 100 Oil tank L 145 145 145 145 Hopper capacity L 50 50 50 Machine dimension m 7.14×1.99×2.37 7.14×1.99×2.37 7.32×1.99×2.37 Machine weight t 14.8 15.4 16.2 50 We reserve the right to make changes as a result of further technical advantages. 7.53×1.99×2.37 16.3 17 Technical data ZE3600 Machine dimensions ZE3600 CLAMPING UNIT mounting plane of fixed platen mm 710 Max. mold opening stroke mm 1410 Space between tie bars H×V mm 820×820 Min. mold dimension mm 540×540 Ejector stroke mm 160 Ejector force kN (tf) 58.8 (6.0) mm 1150×1150 top plane of fixed platen 2144 H F Max. mold height 254 ABCABCAB CABC L/D 22 20 18.321.8 20 18.521.6 20 18.621.5 20 17.5 Injection volume (theoretical)cm3 471570 678 617735863 792929107810681239 1619 Injection weight (PS) 428518617562668785720845 9809721127 1473 Injection pressure Holding pressure mm/s g/s Injection rate (PS) Injection pressure Holding pressure 18 54 (5.5) 1400 1700 285346411346411483411483 560483560731 214 180 153 210 180 155 210 180 138 bar 2180 1800 1510 2140 1800 1530 2100 1800 1550 2100 1800 1380 Mpa 194160134190160136187160 138190162124 bar 19401600134019001600136018701600 1380190016201240 1100h 1400h 1700h Ø200 Ø120 --- -- 218 180 151 214 180 153 210 180 155 -- -- -- bar 2180 1800 1510 2140 1800 1530 2100 1800 1550 -- -- -- Mpa 194160 134 190160136 187160 138 -- -- -- bar 19401600 1340 190016001360 18701600 1380 -- -- -- 700 1100:51/92 1400:56/101 1700:72/129 2250:82/147 1100h:73.2/1301400h:76.8/138 1700h:95/168 -- PressureMpa 141414 14 FlowL/min 100100100 100 Oil tank L 145145145 145 Hopper capacity L Machine dimension m 7.64×2.1×2.447.65×2.1×2.447.86×2.1×2.44 8.32×2.1×2.44 Machine weight t 18.2 19 19.1 21 50 50 50 50 We reserve the right to make changes as a result of further technical advantages. A-A 280 420 560 700 840 980 250250250 - 446540 642 540642754 642754 875 -- kW/A 4×Ø58 160160160 160 151 Mpa 700 400 100 12×Ø38 2250 180 g/s D 52×M20 L45 218 mm/s 50 63.7 (6.5) Mpa OTHERS Connection power 54 (5.5) 23.427.8 32 38 1100 INJECTION UNIT Injection speed 54 (5.5) 250-710 36 Injection rate (PS) 25 16 180 4xM10 L20 166 4xM10 L20 60 115 ( 1100h, 1100 ) 217 4xM10 L20 40 80 80 115 ( 1400h,1400 ) 1700h,1700 1400h,1400 1100h,1100 140 Injection speed 4660715670816070 856080105 35 INJECTION UNIT unit: mm 280 420 560 700 840 980 kW Platen dimensions ZE3600 320300250 210 22 Heating power g/s kN (tf) 462 1166 1366 400 150 100 Nozzle contact force rpm 137 1569 Note:The above machine size does not apply to the 2250 injection unit. 115 Plasticizing capacity (PS) g 1569 115 Screw L/D ratio 5055605560656065 70657080 4176 779 7638 I mm 1300 1547 1714 1472 115 Screw diameter 25 J Mold platen dimension H×V 1083 1676 250 1017 D C 190 mm B E G Min. mold height A 3437 105-130 700 1973 mm 54 3600 Toggle stroke 130 kN 292 Clamping force Screw speed unit: mm ZE3600 700 980 115 ( 1700h,1700 ) A B C D E F G H I J 7858 7644 7363 1518 1356 1271 2333 2281 2085 570 570 570 1388 1388 1388 248 248 243 2084 2084 2006 2237 2237 2032 ø200 ø200 ø200 ø3 ø3 ø3 19 Technical data ZE4500 CLAMPING UNIT Clamping force kN 4500 Toggle stroke mm 800 Min. mold height mm 350 Max. mold height mm 800 Max. mold opening stroke mm 1600 Space between tie bars H×V mm 870×870 Min. mold dimension mm 570×570 Ejector stroke mm 180 Ejector force kN (tf) 98 (10.0) mm 1270×1270 Mold platen dimension H×V A B C AB CAB CA BC Screw diameter mm 55 60 65 6065 7065708075 8090 Screw L/D ratio L/D 21.8 20 18.5 21.62018.621.52017.521.32017.8 Injection volume (theoretical)cm3 617 735 863 792 929 10781068123916191634 18602354 Injection weight (PS) 562 668 785 720 845 980 972 112714731487 16932142 300 250210185 Screw speed Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s kN (tf) kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 56 70 81 54 (5.5) unit: mm Platen dimensions ZE4500 unit: mm 27.8 60 70 85 60 8010580 90110 54 (5.5) 63.7 (6.5) 63.7 (6.5) 323842 1400 170022503350 160 160160160 g/s 346 411 483 411483 560483560731643 731926 Mpa 214 180 153 210180 155210180138205 180142 bar 2140 1800 1530 21001800 15502100180013802050 18001420 Mpa 190 160 136 bar 1900 1600 1360 18701600 13801900162012401850 16201280 mm/s INJECTION UNIT Injection speed Machine dimensions ZE4500 ZE4500 187160 138190162124185 162128 1400h 1700h---- 250 250---- g/s 540 642 754 642 754 875 -------- ---- Mpa 214 180 153 210 180 155 -------- ---- bar 2140 1800 1530 2100 1800 1550 -------- ---- Mpa 190 160 136 bar 1900 1600 1360 1870 1600 1380 -------- ---- mm/s 187 160 138 -------- ---- OTHERS Connection power 20 kW/A 1400:56/101 1400h:76.8/138 1700:72/1292250:82/1473350:111/198 1700h:95/168---- PressureMpa 14 141414 FlowL/min 158 158158158 Oil tank L 300 300300300 Hopper capacity L Machine dimension m 9.29×2.25×2.38 9.29×2.25×2.389.29×2.25×2.38 9.47×2.25×2.4 Machine weight t 25.8 25.926.428.1 50 We reserve the right to make changes as a result of further technical advantages. 5050100 21 Technical data ZE5500 CLAMPING UNIT Clamping force kN 5500 Toggle stroke mm 900 Min. mold height mm 380 Max. mold height mm 880 Max. mold opening stroke mm 1780 Space between tie bars H×V mm 970×970 Min. mold dimension mm 630×630 Ejector stroke mm 180 Ejector force kN (tf) 137.2 (14.0) mm 1400×1400 Mold platen dimension H×V A B C A B C A 657080758090 B C A B mm 55 60 65 60 65 70 Screw L/D ratio L/D 21.8 20 18.5 21.6 20 18.6 21.52017.521.32017.8 Injection volume (theoretical)cm3 617 735 863 792 929 1078 106812391619163418602354 Injection weight (PS) 562 668 785 720 845 972 11271473148716932142 300 250 Plasticizing capacity (PS) Nozzle contact force Heating power g rpm g/s kN (tf) kW INJECTION UNIT Injection speed Injection rate (PS) Injection pressure Holding pressure Injection rate (PS) Injection pressure Holding pressure 56 70 81 54 (5.5) 60 27.8 980 70 85 54 (5.5) 210 185 60 80 105 90 32 80 63.7 (6.5) Platen dimensions ZE5500 unit: mm 110 63.7 (6.5) 38 42 1700 2250 3350 160 160 g/s 346 411 483 411 483 560 483560731643731926 Mpa 214 180 153 210 180 155 210180138205180142 bar 2140 1800 1530 2100 1800 1550 210018001380 205018001420 Mpa 190 160 136 187 160 190162124185162128 bar 1900 1600 1360 1870 1600 1380 190016201240185016201280 1400h 1700h -- -- 250 250 -- -- g/s 540 642 754 642 754 875 ------------ Mpa 214 180 153 210 180 155 ------------ bar 2140 1800 1530 2100 1800 1550 ------------ Mpa 190 160 136 187 160 ------------ bar 1900 1600 1360 1870 1600 1380 ------------ 1700:72/129 1700h:95/168 2250:82/1473350:111/198 -- -- mm/s INJECTION UNIT Injection speed unit: mm C Screw diameter Screw speed Machine dimensions ZE5500 ZE5500 mm/s 1400 138 138 160 160 OTHERS Connection power 22 kW/A 1400:56/101 1400h:76.8/138 PressureMpa 14 14 14 14 FlowL/min 210 210 210 210 Oil tank L 335 335 335 335 Hopper capacity L 50 50100 Machine dimension m 9.72×2.44×2.5 Machine weight t 31.3 50 9.72×2.44×2.5 9.72×2.44×2.5 9.85×2.44×2.5 31.4 31.9 33.6 We reserve the right to make changes as a result of further technical advantages. 23 Technical data ZE6500 Machine dimensions ZE6500 CLAMPING UNIT mounting plane of fixed platen top plane of fixed platen mm 1000 Max. mold opening stroke mm 2000 Space between tie bars H×V mm 1080×1080 Min. mold dimension mm 700×700 Ejector stroke mm 200 Ejector force kN (tf) 196(20.0) mm 1550×1550 F Max. mold height 2292 E 2232 718 A B C A 657080758090 B Screw diameter mm 60 65 70 Screw L/D ratio L/D 21.6 20 18.6 21.52017.521.32017.8 Injection volume (theoretical)cm3 792 929 1078 106812391619163418602354 Injection weight (PS) g 720 845 980 972 11271473148716932142 rpm 250 g/s 60 70 Plasticizing capacity (PS) Nozzle contact force kW 85 210 185 60 80 90 105 80 63.7(6.5) 63.7(6.5) 38 718 718 350 640 718 Injection speed Injection rate (PS) Injection pressure Holding pressure mm/s 160 g/s 411 483 560 483560731643731926 Mpa 210 180 155 210180138205180142 bar 1800 1550 Mpa 187 160 138 190162124185162128 bar 1870 1600 1380 190016201240185016201280 Injection rate (PS) Injection pressure Holding pressure 1800 1380 2050 1800 Platen dimensions ZE6500 unit: mm 50 D -- -- mm/s 250 -- -- g/s 642 754 875 ------------ Mpa 210 180 155 ------------ bar 1800 1550 ------------ Mpa 187 160 138 ------------ bar 1870 1600 1380 ------------ 1700:72/129 1700h:95/168 PressureMpa 14 14 14 FlowL/min 290 290 290 Oil tank L 435 435 435 Hopper capacity L 50 100 Machine dimension m 10.62×2.58×2.88 10.62×2.58×2.6410.62×2.58×2.76 Machine weight t 36.8 24 kW/A 50 We reserve the right to make changes as a result of further technical advantages. 2250:82/147 3350:111/198 -- -- 37.3 76 700 400 150 100 24 55 120 8 12 1000 58 A-A 350 490 630 770 910 1050 1190 1330 420-1000 32 20 12XM24 L48 OTHERS Connection power 677 1600 1800 10618 1420 2100 147 160 1700h INJECTION UNIT Injection speed 2100 1768 700 400 150 100 2250 3350 2100 1505 42 1700 160 632 170 INJECTION UNIT 633 110 54(5.5) 32 720 I Heating power kN (tf) 718 C 46 A 105105 C 70 B 350 490 630 770 910 1050 1190 1330 Mold platen dimension H×V 1330 28 420 1252 D C 1652 mm B 185 Min. mold height A 4817 H 1000 G mm 105-130 6500 Toggle stroke J kN 298 Clamping force Screw speed unit: mm ZE6500 840 1260 170 ( 1700h,1700 ) A 3350 10262 2250 9693 1700h,1700 9308 B 1811 1607 1518 C 2914 2549 2333 D 720 720 640 E 1457 1457 1457 F 307 270 248 G 1927 1887 2152 H 2758 2419 2286 I ø250 ø250 ø250 J ø4 ø4 ø3 L SR15 SR15 SR10 39 25 Platen Layout ZE400 Platen Layout European version unit: mm Movable platen Fixed platen 24×M12 L25 24×M12 L25 Ø100 European version unit: mm Movable platen Fixed platen 28×M16 L35 ZE600 28×M16 L35 Ø100 L20 Ø177.8 Ø100 L20 Ø60 Ø80 14 11 American version unit: mm Movable platen Fixed platen 32×1/2”-13UNC×1“ 32×1/2”-13UNC×1“ 19 14 American version 44×5/8”-11UNC×11/4“ 4×Ø30 2×Ø32 Ø177.8 Ø101.6 152.4 254 355.6 406.4 Ø101.6 152.4 254 355.6 431.8 Japanese version unit: mm Movable platen Fixed platen 52×M12 L25 152.4 254 355.6 431.8 152.4 254 355.6 431.8 Ø60 Ø101.6 152.4 254 355.6 152.4 254 355.6 Ø101.6 L20 152.4 254 355.6 406.4 unit: mm Movable platen Fixed platen 44×5/8”-11UNC×11/4“ 177.8 A-A 140 210 280 350 420 490 30 24 140 210 280 350 420 490 18 A-A 140 210 280 350 420 14 140 210 280 350 420 140 210 280 350 420 4XØ30 140 210 280 350 420 140 210 280 350 140 210 280 350 Ø100 52×M12 L25 152.4 254 355.6 431.8 Japanese version unit: mm Movable platen Fixed platen 60×M16 L35 60×M16 L35 4×Ø30 Ø60 100 150 200 250 300 350 400 26 Ø100 Ø60 100 150 200 250 300 350 400 100 150 200 250 300 350 400 100 150 200 250 300 350 400 100 150 200 250 300 350 100 150 200 250 300 350 Ø200 100 150 200 250 300 350 400 Ø100 100 150 200 250 300 350 400 27 ZE900 32×M16 L35 60×M16 L35 unit: mm Movable platen Fixed platen 32×M16 L35 Ø177.8 Ø177.8 Ø125 4XØ30 140 210 350 420 490 560 140 210 280 350 420 490 4XØ30 Ø125 L20 Ø125 L20 Ø100 Ø80 A-A 140 210 350 420 490 560 30 140 210 280 350 420 490 18 19 14 American version unit: mm Movable platen Fixed platen 44×5/8”-11UNC×11/4“ Ø101.6 4×Ø30 Ø177.8 Ø101.6 152.4 254 355.6 457.2 Japanese version unit: mm Movable platen 60×M16 L35 4×Ø30 Ø101.6 152.4 254 355.6 508 Fixed platen 60×M16 L35 52×5/8”-11UNC×11/4“ Ø177.8 Ø101.6 152.4 254 355.6 457.2 unit: mm Movable platen Fixed platen 52×5/8”-11UNC×11/4“ 152.4 254 355.6 457.2 4×Ø30 19 14 American version 152.4 254 355.6 457.2 44×5/8”-11UNC×11/4“ A-A 140 210 350 420 490 560 152.4 254 355.6 508 140 210 280 350 420 490 152.4 254 355.6 508 Ø125 30 Fixed platen European version 140 210 350 420 490 560 unit: mm Movable platen 18 European version 60×M16 L35 ZE1200 Platen Layout 140 210 280 350 420 490 Platen Layout 152.4 254 355.6 508 Japanese version unit: mm Movable platen Fixed platen 72×M16 L35 72×M16 L35 4×Ø32 Ø200 150 250 350 450 500 28 Ø100 Ø100 150 250 350 450 500 150 250 350 450 500 Ø100 150 250 350 450 500 150 250 350 450 500 150 250 350 450 500 Ø200 150 250 350 450 500 Ø100 150 250 350 450 500 29 Platen Layout ZE1500 Platen Layout European version unit: mm Movable platen Fixed platen 48×M16 L35 48×M16 L35 European version unit: mm Movable platen Fixed platen 40×M16 L35 ZE1900 406.4 40×M16 L35 8×Ø38 30 A-A 140 280 420 560 700 19 14 19 14 American version unit: mm Movable platen Fixed platen 64×5/8”-11UNC×11/4“ 140 280 420 560 700 Ø100 30 A-A 140 280 350 420 490 560 630 18 140 280 350 420 490 560 630 140 280 420 560 700 Ø160 L20 Ø100 18 Ø160 L20 101.6 140 280 420 560 700 140 280 350 420 490 560 630 4XØ32 140 280 350 420 490 560 630 Ø177.8 Ø160 Ø177.8 Ø160 American version unit: mm Movable platen Fixed platen 64×5/8”-11UNC×11/4“ 68×5/8”-11UNC×11/4“ 406.4 68×5/8”-11UNC×11/4“ 406.4 8×Ø32 8×Ø40 Ø101.6 152.4 254 355.6 508 660.4 Japanese version 68×M16 L35 152.4 254 355.6 508 660.4 Japanese version 72×M16 L35 72×M16 L35 4×Ø32 Ø200 Ø100 Ø120 Ø100 150 250 350 500 650 100 150 250 350 500 650 150 250 350 500 600 150 250 350 500 600 Ø100 30 400 8×Ø40 Ø200 150 250 350 500 650 unit: mm Movable platen Fixed platen 150 250 350 500 650 68×M16 L35 Ø101.6 152.4 254 355.6 508 660.4 unit: mm Movable platen Fixed platen 101.6 152.4 254 355.6 508 660.4 Ø101.6 Ø101.6 152.4 254 355.6 508 660.4 152.4 254 355.6 508 660.4 Ø177.8 152.4 254 355.6 508 660.4 101.6 152.4 254 355.6 508 660.4 Ø177.8 150 250 350 500 650 150 250 350 500 650 31 ZE2300 Platen Layout European version unit: mm Movable platen Fixed platen 406.4 101.6 36×M20 L45 12×Ø38 Ø160 A-A American version unit: mm Movable platen 280 420 560 700 840 American version unit: mm Movable platen Fixed platen 72×3/4”-10UNC×11/2“ 406.4 101.6 12×Ø38 12×Ø38 152.4 254 355.6 508 660.4 Japanese version unit: mm Movable platen Fixed platen 92×M16 L35 254 355.6 508 660.4 863.6 Japanese version unit: mm Movable platen Fixed platen 84×M20 L45 400 100 254 355.6 508 660.4 863.6 Ø101.6 254 355.6 508 660.4 863.6 152.4 254 355.6 508 660.4 92×M16 L35 406.4 101.6 Ø101.6 Ø101.6 254 355.6 508 660.4 863.6 152.4 254 355.6 508 660.4 Ø177.8 406.4 101.6 152.4 254 355.6 508 660.4 Ø177.8 Ø101.6 84×M20 L45 400 100 12×Ø38 12×Ø38 250 350 500 650 850 Ø150 Ø100 150 250 350 500 650 800 400 100 250 350 500 650 850 150 250 350 500 650 800 Ø120 32 Ø200 400 100 150 250 350 500 650 800 Ø200 150 250 350 500 650 800 A-A 25 16 72×3/4”-10UNC×11/2“ 406.4 101.6 Ø100 280 420 560 700 840 25 16 Fixed platen 68×3/4”-10UNC×11/2“ 280 420 560 700 840 36 22 140 280 420 560 700 Ø160 L20 36 Ø100 Ø160 L20 68×3/4”-10UNC×11/2“ Ø177.8 280 420 560 700 840 140 280 420 560 700 406.4 101.6 140 280 420 560 700 Ø177.8 140 280 420 560 700 406.4 101.6 28×M20 L45 12×Ø38 Ø160 unit: mm Movable platen Fixed platen 28×M20 L45 ZE3000 22 36×M20 L45 European version 406.4 101.6 Platen Layout 150 250 350 500 650 850 Ø120 150 250 350 500 650 850 33 Platen Layout ZE3600 Platen Layout European version unit: mm Movable platen Fixed platen 52×M20 L45 52×M20 L45 711.2 406.4 101.6 4×Ø58 European version unit: mm Movable platen Fixed platen 60×M20 L40 ZE4500 711.2 406.4 152.4 101.6 60×M20 L40 12×Ø38 8×Ø58 12×Ø38 280 420 560 700 840 980 1120 25 16 American version unit: mm Movable platen Fixed platen 711.2 406.4 101.6 4×Ø58 100×3/4”-10UNC×11/2“ 100×3/4”-10UNC×11/2“ Japanese version 254 355.6 508 660.4 863.6 1066.8 unit: mm Movable platen 700 400 100 711.2 406.4 152.4 101.6 Ø101.6 254 355.6 508 660.4 863.6 1066.8 254 355.6 508 660.4 863.6 1066.8 406.4 152.4 101.6 254 355.6 508 660.4 863.6 1066.8 Ø101.6 Fixed platen 112×M20 L45 4×Ø58 Japanese version 88×M20 L45 88×M20 L45 700 400 150 100 8×Ø58 12×Ø38 Ø150 Ø120 250 350 500 650 850 1050 Ø150 150 350 500 650 850 1050 700 400 150 100 150 350 500 650 850 1050 Ø200 250 350 500 650 850 1050 400 150 100 250 350 500 650 850 1050 unit: mm Movable platen Fixed platen Ø200 34 Ø101.6 254 355.6 508 660.4 863.6 1066.8 12×Ø38 250 350 500 650 850 1050 8×Ø58 Ø177.8 254 355.6 508 660.4 863.6 1066.8 112×M20 L45 711.2 406.4 152.4 101.6 12×Ø38 Ø177.8 254 355.6 508 660.4 863.6 1066.8 25 16 unit: mm Movable platen Fixed platen 12×Ø38 Ø101.6 280 420 560 700 840 980 1120 American version A-A 254 355.6 508 660.4 863.6 1066.8 112×3/4”-10UNC×11/2“ 280 420 560 700 840 980 1120 150 350 500 650 850 1050 112×3/4”-10UNC×11/2“ Ø120 36 A-A Ø200 L20 22 Ø120 280 420 560 700 840 980 Ø177.8 280 420 560 700 840 980 1120 280 420 560 700 840 980 Ø200 L20 36 280 420 560 700 840 980 Ø200 22 406.4 152.4 101.6 280 420 560 700 840 980 Ø177.8 711.2 406.4 152.4 101.6 Ø200 Ø120 150 350 500 650 850 1050 35 ZE5500 Platen Layout unit: mm Movable platen Fixed platen 92×M24 L55 12×Ø38 8×Ø58 120×3/4”-10UNC×11/2“ 280 420 560 700 840 980 1120 36 280 420 560 700 840 980 1120 25 16 unit: mm Movable platen 711.2 406.4 152.4 101.6 8×Ø58 American version 280 420 560 700 840 980 1120 1260 1400 unit: mm Movable platen 140×1”-8UNC×2“ 140×1”-8UNC×2“ 711.2 406.4 152.4 101.6 Ø177.8 Ø101.6 128×M20 L45 711.2 406.4 152.4 101.6 254 355.6 508 660.4 863.6 1066.8 1270 unit: mm Movable platen 700 400 150 100 254 355.6 508 660.4 863.6 1066.8 1270 Ø127 254 355.6 508 660.4 863.6 1066.8 1270 Fixed platen 128×M20 L45 254 355.6 508 660.4 863.6 1066.8 1270 711.2 406.4 152.4 101.6 254 355.6 508 660.4 863.6 1066.8 1270 Japanese version Ø127 254 355.6 508 660.4 863.6 1066.8 1270 Japanese version unit: mm Movable platen Fixed platen 148×M24 L55 148xM42 L55 8×Ø58 700 400 150 100 Ø150 700 400 150 100 Ø150 150 350 500 650 850 1050 1250 Ø200 150 350 500 650 850 1050 1250 700 400 150 100 150 350 500 650 850 1050 1250 Ø200 36 8×Ø58 12×Ø38 12×Ø38 150 350 500 650 850 1050 1250 8×Ø58 12×Ø38 Ø177.8 254 355.6 508 660.4 863.6 1066.8 1270 32 20 Fixed platen 12×Ø38 Ø101.6 A-A 46 280 420 560 700 840 980 1120 1260 1400 A-A Fixed platen 120×3/4”-10UNC×11/2“ Ø120 254 355.6 508 660.4 863.6 1066.8 1270 American version Ø177.8 Ø120 22 711.2 406.4 152.4 101.6 280 420 560 700 840 980 1120 280 420 560 700 840 980 1120 280 420 560 700 840 980 1120 1260 1400 Ø250 Ø200 L20 Ø 250 L20 8×Ø58 12×Ø38 Ø177.8 Ø200 711.2 406.4 152.4 101.6 unit: mm Movable platen 28 60×M20 L45 Fixed platen Ø120 150 350 500 650 850 1050 1250 60×M20 L45 European version 92×M24 L55 711.2 406.4 152.4 101.6 ZE6500 280 420 560 700 840 980 1120 1260 1400 European version 711.2 406.4 152.4 101.6 Platen Layout Ø120 150 350 500 650 850 1050 1250 150 350 500 650 850 1050 1250 150 350 500 650 850 1050 1250 37 Standard Equipment List Injection Unit » Screw rotation speed display » Ejector plate return signal confirmation » Setting for nozzle movement » Cooling water distributor(6 sets up to 150T,8 sets for 100,000 cycles record) » Abrasion-resistant screw unit(open nozzle) » Selection of nozzle retract (3 modes) » Nozzle safety guard » Nozzle contact device（adjustable) » Embedded locating ring (fixed platen) » Quality parameters tolerance setting » 6 Injection steps » Nozzle centre adjustable » In mold ejector pin protection interface » Quality abnormal alarm » 4 Pressure holding steps » Feeding throat temperature closed-loop control » Mold installation mode (Low speed mold move) » Cycle counter » 3 Dosing steps » Injection unit swiveling device » Needle shut off nozzle interface » Machine overview display » 3 Back pressure steps » Independent nozzle temperature control (one spare electrical interface) » Main data setting fast access » Emergency stop(Operating and Non-operating sides) » Machine maintenance administration » Robot mounting layout » Clamping force curve display » Screw suck back select(After holding/After dosing) » Screw suck back delay function Clamping unit others) » Production data graphics » Injection delay function » Central lubrication system » Barrel temperature monitor » Dosing delay function » 6 mold moving steps » S-curve flexible control for mold movement » Display cycle time sequence in each phase » Intrusion/filling by rotating screw » Mold safety protection » Hydraulic core interface(programmable) » 2 Color alarm lamp(red/green) » V/P switch over mode(position,time,pressure,speed) » Mold setup mode » Injection speed response mode select » Injection compression function » Injection pressure segment control » Clamping force pre-release during cooling » Speed limit during holding pressure » Injection during clamping(Pre-injection) » 15 inch TFT color touch screen » Screw postion setting(unit: 0.01mm) » 2 Step mold close/clamp process » Mold profile data memory (up to 200 sets) » Screw rotation speed setting » In mold cut function (ejector activate when mold closed) » Alarm history » Holding pressure time setting » Clamping safety device(Mechanical and Electrical) » Data setting record » Mold open available during dosing » Adjustable moving platen support » 3 USB R/W interface » Standard Zhafir color » "Barrel heating closed-loop control » Clamping force setting » Injection pressure、speed curve display and record » Adjustable machine pads (K/J type available)" » Ejector device » Robot interface » 3 Power sockets (two 16A and one 32A) » Barrel temperature holding function » Ejector function deactivatable » Multi-language available(Chinese, German, English, » Standard hopper » Barrel temperature auto tunning function » 3 Ejector steps » Barrel pre-heating function » Ejector forward delay function » Metric/Imperial unit select » T-screw nuts(for T-slot use) » Barrel temperature synchronous control » Ejector vibration function » I/O monitor display » Hopper slide movement support » Material overheating prevention function » Ejector A/B function(2 steps ejector stroke) » Printer interface(USB connector) » Tools box » Screw cold start prevention » Eject on the fly » Production cycle monitor » Spare parts » Auto purge function 38 » Production data record(5000 cycles display, » Alarm buzzer Controller & Monitor » Injection overfill prevention (HPM) » Display of actual performance data Japanese etc.) » Multi-action selectable during machine alarm Others » Mold clamper » Production profile monitor 39 Options List Injection Unit Product drop plate Automatic safety gate on operator side » Chrome-plating screw unit Clamping force automatically controller » Corrosion and abrasion resistant screw unit Quality flap » High capacity nozzle heat band Product drop detector » Extended nozzle » V/P switch based on in-mold pressure Controller & Monitor » Needle shut off nozzle » Spring nozzle » Mold temperature display and control » Nozzle head customization » Quality flap interface » Stainless steel hopper » Heating disconnect detection function » Additional cooling water distributor Clamping unit » External transformer » Euromap 12 robot interface » Air blow » Euromap 67 robot interface » Pneumatic ejector » Gas-assisted injection interface » Pneumatic core interface（Programable) » Magnetic platen interface » Valve Gate control interface » Mold cavity pressure detection interface » Glass tube water flowmeter » Customized mold platen(T-slot,threaded holes) » Mold unscrew electrical interface Others » Mold height extension 40 » Mold slide block protection interface » Infrared barrel heating band » Eject compression function » Barrel heating insulation cover » Mold auto clamp device (Pneumatic/hydraulic) » CE certification » Intergrated hot runner controller » UL certification 41 42 43
