Program 2015

Transcription

Program 2015

English
krones Academy
Program 2015
Table of Contents
On the Winning Side With Training
5
Open Training
6
Individual Training
7
Bringing Skills to the Customer
8
Important Information in Brief
10
Plastics Technology
15
Filling Technology
23
Process Technology
29
Labelling Technology
Inspection Technology
35
Packaging and Palletising Technology
61
Competency Audit
64
65
Individual Documentation
Electrical Technology
KRONES Automation Concept
IT Solutions
Techniques and Methods for Managers in the Beverage Industry
2
2
9
KRONES Academy Addresses Worldwide
KOSME
2015 seminars
51
67
83
103
115
127
128
On the Winning Side With Training
Dear reader,
Switching on, setting, producing –
if it was just that easy to start up
a new line. But why not? With the
right preparations, every line can be
brought to full potential with ease.
All you need here is targeted training. What applies to sports applies
to our industry as well: Good
material is the best basis. However,
for winning, you need people who
know how to handle it.
Therefore, the Krones Academy
courses are conceived in such a
4
way that your staff will be able
to get the best out of the existing technology. In short and crisp
learning units you will find out
all you need to achieve a safe and
efficient high-quality production.
Sound basic knowledge is part of
the learning targets, just as the
ability to independently handle
the machines. Numerous practical
exercises on original Krones equipment and well-proven methods for
optimising the change-over time,
such as SMED, will swiftly lead your
staff and your line onto the fast lane.
And the best thing about it is: Back
in your factory, the training effect
will manifest itself at once – in short
change-over times and increased
productivity.
Dr Jörg Puma
Head of Krones Academy
5
Open Training
Individual Training
Interactive and uncomplicated: In
our open trainings, participants
from different companies get
together in the Krones Academy.
Instructed by the trainers and
communicating with each other,
they develop a particular technique,
method or skill together.
If you want to participate in an
open training, you don't need to do
anything more than registering and
arriving. We assume all organisation
and conception of the course. You
will find all topics, dates and locations of the open trainings in the
course descriptions on the following
pages.
Client
A
Client
A
Client
B
Client
B
Client
A
Client
C
Client
C
Bespoke and focused: Your company and your needs are the central
points of our individual trainings.
You choose the participants and
define the learning targets you
want to reach. We conceive a
bespoke programme for you that
will exactly meet your specifications
and the level of knowledge of the
participants.
The individual trainings will be held
as needed: either in your company
or at any other location of your
choice. Just call us – and we will
work out together with you how we
can best put your requests, ideas
and training objectives into action.
Client
A
Client
C
Client
B
Client
A
Client
A
6
Client
B
Benefits to you
An open training is just the right
thing if
■ only a few employees are to be
trained on a specific topic.
■ the dates, contents and learning
targets stated in the programme
come up to what you want.
■ you want to benefit from the
exchange of ideas with the participants from other companies.
Client
B
Client
C
Client
A
Benefits to you
An individual training is just the
right thing if
■ several colleagues or entire
departments are to be trained.
■ you want to decide yourself on
location, date or duration of the
training.
■ the learning targets are to be
bespoke concretely for your company and the participants' level
of knowledge.
■ the topic you desire is not
comprised in our catalogue proClient gramme.
Client
Client
C
B
C
Client
B
Client
A
Client
C
Client
B
Client
C
7
Bringing Skills to the Customer
Important Information in Brief
The KRONES Academy has over 110
qualified trainers worldwide. All our
trainers are involved in a process
of steady further qualification and
accordingly didactically trained to
cover your knowledge requirements.
Logon
Website:
www.krones.com/de/academy.php
E-mail:
[email protected]
As well as the headquarters of the
KRONES Academy which is located
at the Neutraubling site, training
centres are established across the
various continents.
The aim is to make our training
contents accessible to you in your
region and in your national language delivered in the best possible
localised and hands-on manner. You
will of course receive a certificate on
completion of each of our seminar
programmes confirming your participation.
Franklin
Course schedule
Beginning of the course: 08:00 a.m.
(09:00 a.m. at the first day)
End of the course:
approx. 04:00 p.m.
Louvain-la-Neuve
Bolton
Neutraubling
Roverbella
Taicang
Accomodation
If desired, we are happy to help you
to book your accomodation. Please
send us the names and travel data
of the participants at least ten days
before the start of the training.
Please note that arising expenses
for the hotel must be paid by the
participants directly in the respective hotel.
Cancellations
There will be no fee for cancellations
that are received two weeks prior to
the beginning of the seminar at the
latest. Later cancellations will result
in a charge of the full course fee.
Transfer
In Germany, we can organise a free
transfer between the airport or train
station, your hotel and the krones
Academy. Please inform us with
your registration whether you want
to use this service.
For this reason, the krones
Academy reserves the right to
cancel seminars or to delay or
change them. You will be informed
about this.
Bangkok
Santa Fé de Bogotá
8
São Paulo
Lagos
Nairobi
Johannesburg
9
Europe
Africa
Great Britain
Gary Wintle
KRONEs uk ltd.
Germany
Valentina D’ Ascanio
Westregen House, Great Bank Road
Wingates Industrial Park
Westhoughton
Bolton BL 5 3XB
Phone +44 1942 8450-00
Fax
+44 1942 8450-9
[email protected]
KRONES ag
Böhmerwaldstraße 5
93073 Neutraubling
Phone +49 9401 70-6414
Fax
+49 9401 70-916414
[email protected]
Asia
Kenya
Alex Kanyitta
KRONES LCS Center East Africa Ltd.
P.O. Box 63674-00619
Ruaka Grove, Runda Estate
Nairobi
Phone +254 207122-763
Fax
+254 207122-607
[email protected]
KRONES Machinery Co. Ltd.
No. 9, Ningbo East Road
215400 Taicang
Phone +86 1391 1856742
Fax
+86 512 535727-76
[email protected]
Nigeria
Oganna Okpala
KRONES LCS Center West Africa Ltd.
Plot 7a Block C, Acme Road,
Ogba, Ikeja, Lagos
Phone +234 1 46 311 30-154
[email protected]
Thailand
Piyaphan Pladruen
KRONES (Thailand) Co. Ltd.
39th Floor, TCIF Tower
1858/138 Bangna-Trad Road,
Bangna Sub District,
Bangna District,
Bangkok 10260
Phone +66 2 7636-541
Fax
+66 2 7636 502
[email protected]
Africa
France/Belgium
Sabrina Mahieu
S.A. KRONES N.V.
Rue de Bosquet, n° 17
Parc Scientifique Einstein
1348 Louvain-la-Neuve – Sud
Phone +32 10 4807-15
Fax
+32 10 4807-22
[email protected]
10
South Africa
Gavin Bent
KRONES Southern Africa (Pty) Ltd.
Stand 324/325, Avante Garde Avenue
Northlands Deco Park, New Market Street
North Riding, Randburg 2194
Johannesburg
Phone +27 11 065 5700
Fax
+27 86 555 9574
[email protected]
China
Jun Yang
11
America
Brazil
Ederson De Campos
KRONES do Brasil Ltda.
Av. Presidente Juscelino, 1140
09950-370 Diadema, São Paulo
Phone +55 11 407 59 564
Fax
+55 11 407 59-800
[email protected]
USA
Frank Kaczmarski
KRONES INC.
9600 South 58th Street
Franklin, Wisconsin 53132-6241
Phone +1 414 409-4580
Fax
+1 414 409-4120
[email protected]
Social Media
KRONES is using the social media
for exchange with business partners, employees and all those who
are interested in the company and
its products.
Facebook
facebook.com/kronesag
facebook.com/kronesacademy
YouTube
youtube.com/kronestv
You will find us here:
Internet
www.krones.com
www.krones.com/de/academy.php
Colombia/Ecuador/Panama/Venezuela
Luis Rolando Vergel
KRONES Andina Ltd.
Av. Calle 80 No. 69-70 Bodega 30
Bogotá D.C.
Colombia
Phone +57 1310-8748
Fax
+57 1310-8798
[email protected]
12
Argentina/Bolivia/Chile/Paraguay/Uruguay
Diego Adrián Lois
KRONES Surlatina S.A.
Riobamba 588 - 3° Piso
C1025ABL Buenos Aires
Phone +54 11 4373-2884 ext 214
Fax
+54 11 4372-9612
[email protected]
Twitter
twitter.com/kronesag
13
Plastics Technology
Perfect PET
The light and break-proof PET plastic
bottles have substituted glass
bottles as prime packaging material
quite a while ago. With the Contiform stretch blow-moulder series,
krones offers consumption-optimised lines on which PET bottles
can be produced in a variety of
shapes and sizes from preforms.
14
To precisely fulfil the specific
requirements of the customers, the
machines are available in several
sizes and model variants.
In addition, we support our customers in the development of the
packaging and the individual design
of their PET bottles.
15
Plastics Technology
Contiform – Operation
Contiform – Basics (and Introduction to the Electrical Components)
Course: P 01; duration: 2 days
Target group:
Operators
Suitable for the following machine
types: Contiform 2 and 3
Requirements: none
Topics:
■ General information on the
Contiform
■ Explanation of the mechanical
components
■ Overview of the process technology (heating and blowing
processes)
16
Course: P 02; duration: 3 – 4 days
■
Significance of the lubrication
system
■ Important touch-screen
functions
■ Starting and converting the
machine
■ Recipe management
A current model of the Contiform 3
(zenOn 6.22) is available for the
practical training units.
Locations:
Franklin (US), Taicang (CN)
Dates/prices:
See page 128 onwards
Course objective:
A sound machine knowledge is
essential for a high line efficiency. In this course, you will
obtain the necessary knowledge about the Contiform.
After only two days you will be
able to independently operate
the machine. Moreover, you
will learn about the lubrication intervals and lubrication
points and you will know how
to quickly eliminate minor
problems.
Target group:
Operators, mechanical maintenance
staff, electrical maintenance staff,
line managers
types: Contiform 2 and 3
Requirements: none
Topics, basics:
■ Construction and method of
operation of the Contiform
■ Machine pneumatic system
■ Lubrication intervals
■ Possible malfunctions and solutions
■ Heating and blowing process
■
zenOn 6.20/6.22 visualisation
system: diagnosing faults
■ Recipe management (creating
and changing recipes)
■ Air recycling system
Topics electric components:
■ AS-i bus, B&R control system,
Profibus, krones wiring diagram
Course objective:
How can malfunctions be
quickly eliminated and how
can production stability be
optimised on a sustained basis?
With the right quantity of background knowledge and practical
exercises, this seminar enables
you to safely operate the
Contiform and to do important
settings autonomously.
Locations:
Neutraubling (DE), Franklin (US)
Dates/prices:
17
Plastics Technology
Contiform 3 – Maintenance
Target group:
Operators with maintenance tasks,
mechanical maintenance staff,
electrical maintenance staff
types: Contiform 3 (K44X-XXX)
Requirements:
You must have attended the course
“Contiform – Basics” (P 02) or have
similar experience on the machine
Topics:
■ Overview of the individual
components of the Contiform S8
including touch-screen
18
■
Practical adjustments on
mould hangers, blowing/
heating module, stretching unit,
cams, etc.
■ Transfer synchronisation
■ Lubrication and maintenance
Locations:
Neutraubling (DE), Franklin (US),
Taicang (CN)
Dates/prices:
Course objective:
The objective of this seminar
is trouble-free production with
shorter downtimes. You will
learn how to consequently prevent malfunctions by correctly
adjusting the Contiform, thus
permanently increasing the
efficiency of the machine. For
this purpose, you will be doing
the settings on the training
machine and learn to optimise it
further. The topics “Identifying
and eliminating mechanical
malfunctions” round off your
knowledge.
Target group:
■
types: Contiform 2 (K43X-XXX and
K78X-XXX)
Requirements:
You must have attended the course
“Contiform Basics” (P 02) or have
similar experience on the machine
Locations:
Topics:
■ Correct reaction to malfunctions
■ Replacing wear parts
Wear parts strategy
Checking and replacing components
■ Correctly adjusting new parts
■
Course objective:
This training provides you with
the expertise that is necessary
to perform maintenance efficiently and safely.
This will allow you to increase
the output and minimise downtimes on a sustained basis.
Dates/prices:
19
Plastics Technology
Contiform 2 – PET Process Technology
Target group:
types: Contiform 2 (K43X-XXX and
K78X-XXX)
Requirements: none
Topics:
■ Basic PET knowledge
■ Decisive process factors
■ Setting and optimising parameters for “new” bottles
■ Using and managing recipes on
the touch-screen
20
■
Significance of process parameters in relation to preform and
bottle specifications
■ Practical exercises on the
machine, particularly setting up
new bottles
■ Optimising processes for low
energy consumption
■ Saving recipes
Locations:
Taicang (CN)
Dates/prices:
Course objective:
This training helps you to
obtain a steady high bottle
quality, even with very lightweight preforms with a narrow
process window. Moreover, you
will learn how to adjust your
machine to new bottle types
and optimise parameters.
Target group:
types: Contiform 3 (K44X-XXX)
Requirements: none
Topics:
Basic PET knowledge
■ Decisive process factors
■ Setting and optimising parameters for “new” bottles
■ Using and managing recipes on
the touch-screen
■ Significance of process parameters in relation to preform and
bottle specifications
■
■
Practical exercises on the
machine, particularly setting up
new bottles
■ Optimising processes for low
energy consumption
■ Saving recipes
Course objective:
This training helps you to
obtain a steady high bottle
quality, even with very lightweight preforms with a narrow
process window. Moreover, you
will learn how to adjust your
machine to new bottle types
and optimise parameters.
Location:
Neutraubling (DE)
Dates/prices:
21
Filling Technology
We leave no bottle empty
They can be sparkling or still, some
are technically sophisticated while
others are less complicated, some
look great in PET containers, others
in glass bottles or cans: There is a
huge amount of variety in beverage
types – and it's almost infinite when
the various types of container are
considered as well. krones filling
technology is a match for every one
of these possibilities. That's because
it comprises a large selection of
filling processes, performance spectrums and hygiene levels.
22
Bottling sensitive beverages with
our aseptic lines, handling food
products with exacting demands
with the Viscofill piston filler, or
natural fruit pieces in exquisite
juices with the krones Twin-Flow
process: Our filling systems meet
every challenge.
23
Filling Technology
Filler Volumetic VODM/Modulfill VFS, VFJ – Mechanical Components of the Filler
Course: F 01; duration: 4 days
Target group:
mechanical maintenance staff
types: Volumetic VODM and
variants, Modulfill VFS, VFJ
Requirements:
Experience with the machine is
an advantage, but not absolutely
necessary.
Topics:
operation of the filler
■ Trouble-shooting on the filler
valve
24
■
■
■
■
■
■
Pipe system mimic diagrams
Operating and cleaning programs
Control and visualisation on the
touch-screen
Pneumatic components
Cleaning, lubricating, and maintaining the machine
Maintenance of the most important subassemblies
Locations:
Taicang (CN), Bangkok (TH)
Dates/prices:
Course objective:
In four days, you will become
familiar with the construction
and the method of operation
of the filler. After the course,
you will be able to overhaul a
filling valve on your own, and to
maintain the most important
assemblies. You will know how
to systematically spot malfunctions and you will be familiar
with maintaining and lubricating the machine.
Filler Mecafill VKP/Modulfill HRS – Mechanical Components of the Filler
Target group:
types: Mecafill VKP, Mecafill VKPV,
Mecafill VKPV-CF, Mecafill VKP-PET,
Mecafill VKP-DL, Modulfill HRS
Requirements:
Experience with the machine is
an advantage, but not absolutely
necessary.
Topics:
operation of the filler
■ Trouble-shooting on the filler
valve
■
■
■
■
■
■
Pipe system mimic diagrams
Operating and cleaning programs
Control and visualisation on the
touch-screen
Pneumatic components
Cleaning, lubricating, and maintaining the machine
Maintenance of the most important subassemblies
Locations:
Bangkok (TH)
Course objective:
In four days, you will be introduced to the construction and
the method of operation of the
filler. After the course, you will
be able to overhaul a filling valve
on your own, and to maintain
the most important assemblies.
You will know how to systematically spot malfunctions and you
will be familiar with maintaining and lubricating the machine.
Dates/prices:
25
Filling Technology
Aseptic Filling With PET-Asept D (H2O2) – Process Technology
Target group:
Operators, line managers
types: PET-Asept D (H2O2)
Requirements: none
Topics:
■ Process sequence and control via
programs
■ Method of operation of the
system
26
■
Hygienic standards
Principle of troubleshooting
■ Basics of the process master
controller
■
Locations:
Taicang (CN)
Dates/prices:
Course objective:
What is the construction of an
aseptic line and what processes
are executed in the line? You
will be able to confidently
answer questions like these
after the course, because you
will be in a position to explain
the significance of the line
components and of the hygienic
measures to others. In five
intensive days, you will have
developed a sound basis for
operating the line. Bringing an
existing line into an aseptic
condition and systematically
eliminating minor malfunctions
will be a routine job for you at
the end of the course.
Aseptic Filling With PET-Asept L (Peracetic Acid) – Process Technology
Target group:
Operators, line managers
types: PET-Asept L (PAA)
Requirements: none
Topics:
Process sequence and control via
programs
■ Method of operation of the
system
■
■
Hygienic standards
Principle of troubleshooting
■ Basics of the process master
controller
■
Locations:
Taicang (CN)
Dates/prices:
Course objective:
What is the construction of an
aseptic line and what processes
are executed in the line? You will
be able to confidently answer
questions like these after the
course, because you will be in a
position to explain the significance of the line components
and of the hygienic measures
to others. In five intensive days,
you will have developed a sound
basis for operating the line.
Bringing an existing line into an
aseptic condition and systematically eliminating minor malfunctions will be a routine job for
you at the end of the course.
27
Process Technology
We know what we're doing
krones brings all of its knowledge
and experience to bear in the production of beverages. We do that by
bundling our line expertise with our
knowledge of process and engineering technology and of microbiology
to deliver comprehensive solutions
for complete production lines.
28
We plan breweries and fit them out
with energy-saving brewhouses.
What we offer also includes the
right cellar technology, i.e. products
for fermentation, filtration and
storage. krones has intelligent
solutions for the production and
processing of non-alcoholic beverages and milk as well.
29
Process Technology
evoguard Valve Technology
Twin Flow System (TFS) – Operator Training
Course: B 09; duration: 1.5 days
Target group:
Suitable for the following components: evoguard valve series
Requirements: none
Recommendation:
Can be combined with courses
“Filler Volumetic VODM/Modulfill
VFS, VFJ – Mechanical Components
of the Filler” (F 01), “Filler Mecafill
VKP/Modulfill HRS – Mechanical
Components of the Filler” (F 02),
and “Twin Flow System (TFS) –
Operator Training” (B 10)
30
Topics:
Function of the individual valves
(using models)
■ Process technology basics
■ Pneumatic components
■ Disassembling and assembling
individual valves using training
components
■ Control system
■ Maintenance and service
■
Location:
Neutraubling (DE)
Dates/prices:
Course: B 10; duration: 1 day
Course objective:
This course conveys all important information concerning the
construction, function and application of the Evoguard valve
technology. You will acquire a
fundamental understanding for
the underlying process and control engineering. The acquired
knowledge allows you to overhaul and service valves on your
own. You will gain security in
handling the technical documentation, and you will learn
how to order the right spare
parts by means of the QR code.
Target group:
Operators
types: Candle filter, Twin Flow
System (TFS)
Requirements:
Basic knowledge of filtration
Recommendation:
Can be combined with course
“Botec F1 – Recipe Management”
(B 12)
Topics:
Production process (special
TFS parameters, optimisation
options)
■
■
■
■
■
■
Cleaning process (special TFS
cleaning parameters, ensuring successful cleaning, visual
inspection of the candles)
Malfunctions during the process
(troubleshooting, analysing and
preventing malfunctions in the
ongoing process)
Process monitoring and analysis
based on parameters, trends and
batch logs
Inspection and maintenance of
mechanical components
Clarifying individual problems
Locations:
Neutraubling (DE), Freising (DE)
Course objective:
In this course, you will acquire a
sound basis for your daily work
with the Twin Flow System. Not
only will you gain insight into
the construction and method
of operation of the filter, you
will also learn how to manipulate and optimise the process
yourself. You will master trends
and batch protocols analysis as
confidently as defining maintenance intervals and inspecting
mechanical components. Last
but not least, we will reveal tips
and tricks for efficiently saving
water.
Dates/prices:
31
Process Technology
technology
Botec F1 – Recipe Management
Course: B 12; duration: 1 day
Target group:
Master brewers, brewing engineers
Suitable for the following software:
Botec F1
Requirements:
Basic computer knowledge, basic
knowledge of the Botec F1 system
Recommendation:
Can be combined with courses
“Evoguard Valve Technology”
(B 09) and “Twin Flow System (TFS)
– Operator Training” (B 10)
32
Topics:
Troubleshooting, tips and tricks
■Handling/accessing:
– Online help
– Technical documentation
– Botec F1 Helpline
■
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
Copying and changing existing
recipes? Adapting and optimising parameters? After the
course, you will do all this with
ease. In order to use Botec F1
safely and autonomously, you
will learn how to systematically
use the technical documentation as well as the program help
feature. After only one day, you
will have a command of analysis
and configuration of protocols,
and you will safely use the tools
for recording and evaluating
data.
33
Sits perfectly and looks good
The beverages market is characterised by new trends, new products,
new groups of buyers and new
markets. The beverage producer has
to include maximum flexibility in
the planning of his production steps
so that he can start new campaigns
and market new products quickly.
The label plays a critical role. It is
important that the label is positioned precisely at the very highest
speed.
34
KRONES has the right highly flexible
machines for every shape and
design. We can handle labels in cold
gluing and hotmelt processes just
as easily as self-adhesive labels.
krones also offers innovative
solutions for sleeves that are shrunk
onto the bottle.
35
Cold-glue Table Machine
Cold-glue Module Machine
Course: L 17; duration: 4 days
Target group:
line managers
types: all KRONES table machines
with cold-glue labelling station
Requirements: none
Topics:
Machine functions
■ Mechanical and electrical components
■ Tasks prior to, during and after
production
■ Control elements, touch-screen
■ Malfunctions and troubleshooting
■
36
■
Glue, label and container quality
Converting handling parts
■ Adjustments and practical work
(70 % of the course duration)
– From container infeed to
machine discharge
– Glue roller, glue scraper and
pallet carrousel
– From label magazine to label
transfer to the containers
– Brushing-on and rolling-on unit
■ Maintenance work
■
Locations:
Bolton (UK), Bangkok (TH),
Johannesburg (ZA)
Dates/prices:
Course objective:
A malfunction occurs – what
now? This seminar provides you
with tried-and-true strategies
with which you can quickly put
the machine back on course.
Here you'll become familiar with
effective methods for specifically locating and effectively
eliminating malfunction causes.
Then long downtimes and
problems with product quality
will be a thing of the past. And
so that you can apply what
you've learned immediately at
your plant, a large part of the
seminars consists of practical
exercises.
Target group:
line managers
types: all KRONES table machines
with cold-glue labelling station
Requirements: none
Topics:
Machine functions
■ Mechanical and electrical components
production
■ Control elements, touch-screen
■ Malfunctions and troubleshooting
■ Glue, label and container quality
■
■
Adjustments and practical work
machine discharge
– Converting handling parts,
docking/undocking labelling
stations
– Glue roller, glue scraper and
pallet carrousel
– From label magazine to label
transfer to the containers
– RPC bottle turning unit
■ Maintenance work
Locations:
Bolton (UK), Johannesburg (ZA)
Course objective:
The objective of this seminar
is efficient production with
unplanned downtimes. You
will learn how to consequently
prevent malfunctions with the
correct adjustment and maintenance work, thus increasing
the efficiency on a sustained
basis. After four days with many
practical exercises, you can work
independently with the machine
while achieving a high labelling
quality and quickly eliminating
various faults.
Dates/prices:
37
Cold-glue Labelling Station
Servicing the Cold-glue Machine
Course: L 19; duration: 2.5 days
Target group:
Mechanical maintenance staff,
electrical maintenance staff, line
managers
types: all KRONES table and module
machines with cold-glue labelling
stations
Requirements: none
Topics:
Maintenance intervals and
adjustments
■ Identifying and eliminating malfunctions
■ Glue, label and container quality
■
38
■
Adjustments and practical work
machine discharge
– On glue roller, glue scraper and
pallet carrousel
– On label magazine and gripper
cylinder up to label transfer to
the container
– On the brushing on station,
rolling-on station
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
Producing trouble-free? Without
unplanned downtimes, but with
a high labelling quality? You will
find out how to do that in this
seminar. At a training machine
you will practice all important
adjustment and maintenance
work on a labelling station so
that you can reliably apply your
new skills back at your plant.
You will learn effective methods
with which you can not only
quickly identify causes of trouble, but above all, you will be
able to systematically eliminate
them.
Target group:
Mechanical maintenance staff
types: all KRONES table and module
machines with cold-glue labelling
stations
Requirements:
Basic knowledge in general mechanics and labelling technology
Practical topics:
Removing, repairing, assembling
and adjusting of
– Worm drive, toothed belt and
universal joint shaft
– Guidance handling parts and
dead plates
■
– Bottle table, servo motor seal
kit, rotary plate
– Encoder; setting the zero point
■ On the labelling station
– Glue roller bearing, glue
scraper
– Pallet movement
– Label magazine
– Gripper cylinder
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
Are there proven strategies
for how to reliably and quickly
eliminate machine failures? And
can malfunctions be prevented
before they occur? This seminar
will show you how best to react
in case of emergency: You will
learn how to quickly restore
the machine to proper working
order when problems occur. And
you will become familiar with
effective maintenance methods
with which you can prevent risks
and faults from the outset.
39
KRONES Self-adhesive Technology APS 3 and APS 4 – Mechanical Components
Target group:
line managers
types: Autocol APS 3 and APS 4 table
and modular machines
Requirements: none
Topics:
■ Overview of the machine functions
■ Pneumatic system and electrical
components
■ Operating the machine and the
touch-screen
■ Troubleshooting
■ Change-over
40
■
Adjustment (approx. 50 % of the
training time):
– Container table, container head
– Machine infeed and discharge
– Label film drive
– Application arm, application
wedge
– Peeled label carrier film disposal unit
– Label removal unit to container
■ Requirements on the label and
container quality
■ Parameters
Locations:
Bolton (UK), Taicang (CN)
Course objective:
Spurring labeller top performance – without unplanned
downtimes and product faults?
You will find out how to do that
in this seminar. You will gain an
understanding of the design and
functionality of the machine
and so that you will be able to
operate it independently and
safely. You will learn how to
quickly eliminate malfunctions
and how to prevent them in the
first place in the future.
Sleevematic 795 M for Shrink Sleeves – Mechanical Components
Target group:
mechanical maintenance staff, line
managers
types: only Sleevematic type 795 M
– linear machine for shrink sleeves
Requirements: none
Topics:
■ Overview of the machine functions
■ Label and container path
■ Operating the machine and the
touch-screen
■
■
■
■
■
Pneumatic system and electrical
components
Explanation of the most important parameters
Mechanical adjustments:
machine infeed, mandrel, cutting
ring, feed and transfer rollers
Quality of labels and containers
Lubrication and maintenance
Locations:
Taicang (CN)
Course objective:
This course will familiarise you
with the different assemblies of
the Sleevematic and its functions. After only two days you
will be able to set all important
machine and product parameters. In order to acquire a safe
and efficient production routine,
you will also learn how to do all
mechanical adjustments – from
the infeed to the discharge of
the machine.
Dates/prices:
Dates/prices:
41
Canmatic Labeller – Operation/Maintenance
Change-over of Labellers – Workshop
Course: L 11; duration: 2.5 days
Target group:
line managers
types: Canmatic for wrap-around or
pre-cut labels
Requirements: none
Topics:
■ Function of the labeller
■ Glue, label and container
■ Application: from label to container
42
■
The container flow from the
infeed to the discharge
■ Setup of the labeller including
the synchronisation of the labelling station
■Change-over
■ Operating the touch-screen
■ Safety devices and displays
■ Care and maintenance
■Troubleshooting
Locations:
Franklin (US), in your factory
Dates/prices:
Course objective:
The more qualified the machine
is operated and maintained,
the more efficiently will it work.
With systematic exercises and
valuable background knowledge, this course will enable you
to get the maximum out of your
Canmatic. All training contents
will be explained and exercised
directly on a training machine.
Target group:
line managers
types: all KRONES labellers
Requirements: none
Topics:
Analysis of the actual situation
■ Specification of your objective
together with operators and
managers
■ Optimising the process with the
aid of the experience of the team
members
■
■
Developing a new process
Setting down the new process in
a checklist
■ Change-over based on the newly
defined processes
■ Measuring the time savings
■
Locations:
Franklin (US), in your factory
Dates/prices:
Course objective:
Efficiency is frequently
neglected during change-over.
To counteract this problem, the
participants in this workshop
will work out together methods
for a more productive changeover, considering the individual
situation of your line. The new
process will be described in a
checklist. It can be implemented
immediately in your plant. Our
trainers work according to the
SMED method, which is also
applied within the framework
of TPM.
43
Contiroll (745) Hotmelt Technology
Contiroll Hotmelt Machine – Maintenance
Target group:
line managers
types: Contiroll (745)
Requirements: none
Topics:
■ Machine functions
components
production
– Control elements, touch-screen,
troubleshooting
■ Change-over
■ Adjustment work
44
– Container passage
– Reel holder, automatic label
reel splicing
– Label film buffer, label film
guider
– Feed roller, cutting unit, gluing
unit
– Vacuum gripper cylinder
– Label parameters
■ Label, container, and glue quality
Locations:
Bolton (UK), Bangkok (TH)
Dates/prices:
Course objective:
Lower maintenance costs, more
efficient change-over: This
course will show you how to
achieve these objectives. In four
days, you will obtain all knowledge that you need to keep the
Contiroll in operation in the best
possible manner and to maintain it optimally. The practical
part on our training machine
provides the opportunity to test
and exercise the new methods.
Target group:
Mechanical maintenance staff
types: Contiroll 745, Contiroll HS,
Contiroll Modul
Requirements:
Basic knowledge in general mechanics and labelling technology
Topics:
■ Repair work and adjustment in
practice: rolling-on station, rotary
plate, gluing unit, cutting unit,
vacuum cylinder
■ Repairing the machine drive
■
Routine maintenance and lubrication work
■ Handling special tools
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
Less downtime, less malfunctions, longer service life – this
training will show you how to
increase the productivity of the
labeller on a sustained basis. You
will learn how to quickly restore
the machine to an operational
condition in the even of a failure
and how to perform preventive maintenance. A training
machine and special training
modules provide you the opportunity to test and practice the
new methods with the support
of the trainer.
45
Contiroll HS (High Speed) Hotmelt Technology
Contiroll HS (High Speed) – Operator Training
Target group:
line managers
types: Contiroll HS (High Speed)
table and modular machines
Requirements: none
Topics:
■ Machine functions
components
production
– Control elements, touch-screen,
troubleshooting
46
■
Change-over
Adjustment
– Machine infeed and discharge
– Brushing on, rolling on
– Reel holder, label reel splicing
– Label film guider, feed roller,
cutting unit
– Glue roller and glue scraper,
vacuum-grip cylinder
– Label transfer unit
■ Labels, container and glue
■ Parameters
■
Locations:
Bangkok (TH)
Course objective:
Labelling at high speed and
with perfect quality? With the
right operation and the correct
maintenance, this is mere child's
play for the Contiroll. With the
right amount of background
knowledge and with practical
exercises, this seminar enables
you to ensure a perfect product
quality and to quickly eliminate
possible malfunctions.
Target group:
staff
Requirements: none
Topics:
■ Construction, safety and function
of the Contiroll HS
■ Pneumatic components
■ Touch-screen menu navigation
■
Maintenance and lubrication
Basic knowledge of electrical
components
■ Handling containers and labels
■ Elementary troubleshooting
methods
■
Locations:
Franklin (US), Bangkok (TH)
Course objective:
This course provides you insight
into the Contiroll HS, its controller functions and the navigation
on the touch-screen. By means
of practical exercises, you will
gain the necessary confidence to
efficient operate the Contiroll HS
on a high production level.
Dates/prices:
Dates/prices:
47
Contiroll HS (High Speed) – Maintenance
Systematic Troubleshooting Using the Contiroll HS
Target group:
staff
Requirements:
Participation in the course
“Contiroll HS – Operator Training”
(L 08) or corresponding knowledge
Topics:
■ Explanation of the mechanical
and pneumatic components with
practical exercises
■ Maintenance intervals, maintenance
48
■
Adjustment procedures for
Contiroll HS components
■ Removal and installation of necessary components
■ Proper cleaning and maintenance exercises
■ Enhancement of knowledge on
troubleshooting methods
Locations:
Franklin (US), Bangkok (TH),
Taicang (CN)
Dates/prices:
Course objective:
This maintenance course
will help you in reaching
maximum productivity with
the Contiroll HS. During three
intensive training days you
will enhance your knowledge
about setup, the mechanical
construction, and the timing
of the machine. This enables
you to check, set, and correct
all mechanical functions of the
Contiroll HS.
Target group:
Mechanical maintenance staff, line
managers
types: Contiroll HS
Requirements:
Experience with the machine
Topics:
■ Methods, basics and definitions
of systematic troubleshooting
■ Practical elimination of malfunctions on the Contiroll HS
■
Touch-screen: most frequent
malfunction warnings
■ Adjustment faults on the
Contiroll HS
Locations:
Dates/prices:
Course objective:
This course will prepare you to
quickly track down the causes
of trouble. You will learn wellproven principles of methodical
troubleshooting, among others
the Pareto and the Ishikawa
diagram. This systematic procedure will finally enable you to
significantly reduce unplanned
downtimes.
49
Safe and lightning-quick
When food is being produced
and processed, it is essential that
every production step is monitored
closely. This responsible task is handled by our inspection technology.
High-resolution camera systems
inspect cleaned bottles before they
are filled in order to ensure that
there is no dirt or foreign object in
the container.
50
After filling and labelling, a check
is made to determine whether the
fill level is correct and the cap and
label are in the correct position.
Everything is done at a breathtaking
speed. The seamless documentation
of the production and control data
makes the process perfect.
51
Linatronic M2 – Basic Course
Linatronic M2 – Advanced Course
Course: I 02; duration: 4 days
Target group:
Electrical maintenance staff
■
types: Linatronic 735 M2, 712 M2
■
Requirements:
Basic knowledge of electrical equipment
Topics:
■ Construction and function
■ Overview of the electrical and
electronic components
52
■
■
■
■
■
■
Hardware plan
Bus systems
Operation
Change-over
Inspection units
Troubleshooting
Data back-up
Creating new users
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
In this course, you will learn how
to save unnecessary material
costs for bulk glass: With the
right machine settings, you
reduce the rejection rate, and,
at the same time, keep a steady
high quality standard. Practical exercises on the Linatronic
training machine provide the
opportunity to implement the
newly acquired knowledge into
practice.
Target group:
types: Linatronic 735 M2, 712 M2
Requirements:
Participation in the “Linatronic M2
– Basic Course” (I 01) or similar
knowledge
Topics:
■ Brief revision of principles of
inspection technology
■ Creating and parameterising a
new container type
■
Explanation and parameterisation of the test container
program
■ Setting the shift register
■ Fault diagnostics by means of
oscilloscope
■ Replacing faulty components
Locations:
Neutraubling (DE), Taicang (CN)
Course objective:
This course enables you to
independently cope with malfunctions and other tasks on
the machine. You will learn how
to increase inspection accuracy.
Setting new container types and
efficient troubleshooting will be
exercised directly on the training
machine.
Dates/prices:
53
PET-View
Checkmat 731 and 752
Target group:
types: PET-View Typ 776
Requirements:
equipment
Topics:
operation of the PET-View
■ Operation
54
■
Method of operation and parameterisation of the inspection
units
– Base inspection unit
– Neck finish inspection unit
– Side wall and base quality
■ Troubleshooting
Location:
Franklin (US)
Dates/prices:
Course objective:
This seminar deals with the
external factors of influence on
the inspection efficiency. Setting
up new container types and
efficient troubleshooting are
practised directly on the training
machine (Contiform with integrated PET-View).
Target group:
types: Checkmat 731 and 752,
Sekamat, Cantronic, ModulCheck
Requirements:
equipment
Topics:
operation of the inspection unit
■
Operation
Method of operation and parameterisation of the inspection
units
■ Setting up a new container type
■ Data back-up
■
Locations:
Franklin (US), Bangkok (TH),
Taicang (CN)
Course objective:
Using a Checkmat, you will
ensure the quality of your products. In this course you will learn
how to optimally work with the
inspector and how to prevent
rejection of faultless products.
In order to simulate a realistic
learning environment, a training
machine will be provided at any
time during the course.
Dates/prices:
55
Checkmat 707
Modulare Linatronic 735 – Basic Course
Course: I 06; duration: 1 day
Target group:
types: Checkmat 707 with
LCT 3 controller
Requirements:
equipment
Topics:
■ Mechanical construction of the
inspection unit
■ Adjustment, operation, maintenance and cleaning
56
■
Introduction to the machine
documents
■ Parameterisation of the inspection units
■ Data back-up
Locations:
Bangkok (TH)
Dates/prices:
Course objective:
Using a Checkmat, you will
ensure the quality of your products. In this course you will learn
how to optimally work with the
inspector and how to prevent
rejection of faultless products.
In order to simulate a realistic
learning environment, a training
machine will be provided at any
time during the course.
Target group:
■
types: Linatronic 735
■
Requirements:
equipment
Topics:
■ Construction and function
■ Hardware plan
■
■
■
■
■
Bus systems
Operation
Change-over
Inspection units
Explanation and parameterisation of the test container
program
Troubleshooting
Data back-up
Location:
Neutraubling (DE)
Course objective:
This course will familiarise you
with the components of the
Linatronic 735. You will be able
to perform all important operations on your own. Moreover,
practical exercises will help
you to quickly gain confidence
and expertise in handling the
machine.
Dates/prices:
57
Modular Linatronic 735 – Advanced Course
Target group:
types: Linatronic 735
Requirements:
Participation in the “Linatronic 735
– Basic Course” (I 08) or similar
knowledge
Topics:
■ Brief revision of principles of
inspection technology
■ Creating and parameterising a
new container type
58
■
Setting the shift register
Fault diagnostics by means of
oscilloscope
■ Replacing faulty components
■ Calibrating servo drives
■
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
This course provides the
opportunity to enhance your
knowledge acquired in the
basic course. You will learn how
to set up new container types
and how to efficiently use the
diagnostics functions. Practical
exercises on a training machine
will ensure that you will be able
to implement what you have
learned immediately in your
own factory.
59
We pack a hefty punch
The food and beverages industry is
producing ever more varied products in a wide range of forms. That
means packaging lines have to be
very flexible and capable of opening
and assembling packs reliably.
krones meets these requirements
with aplomb.
60
Our product range includes fully
automated packers and unpackers,
multifunctional robots that assemble pallets, pallet conveying systems
through to complete packing lines.
In brief, we have the right solution
for every spatial concept.
61
Non-returnables Packaging Technology – Systematic Troubleshooting
by Means of Targeted Problem Analysis
Course: D 01; duration: 2 days
Target group:
types: Variopac, Wrapapac (from
zenOn 5.5), Variopac Pro
Requirements: none
Topics:
■ Safety systems
■ Function and operation of touchscreen
■ Glue, carton and film
■ Main machine functions
■ Identifying and eliminating malfunctions (diagnostics functions)
62
■
■
■
■
■
■
■
■
Replacing motors, frequency
inverters, encoders
Replacing the cutters on the film
cutting module
SEW Movigear conveyor controller
Reading, understanding and
using connection diagrams
Explanation of the parameters
Electrics and gas, shrinking
tunnel (krones, Sotec)
Maintenance and lubrication
Spare parts documentation and
orders
Locations:
Rosenheim (DE), Taicang (CN)
Dates/prices:
Course objective:
A fault occurs – what now? The
target of this course is minimising unplanned production
downtimes. We provide you
with well-proven strategies on
how to react quickly and sensibly to malfunctions. With these
techniques, you will identify
causes of production losses as
quickly as you will eliminate
them.
Robobox and Modulpal – Systematic Troubleshooting
by Means of Targeted Problem Analysis
Course: D 04; duration: 3 days
Target group:
types: Variopac, Wrapapac (from
zenOn 5.5), Variopac Pro
Requirements: none
Topics:
■ Safety systems
■ Function and operation of touchscreen
■ Basic functions of the machine
■ Main machine functions
■ Identifying and eliminating malfunctions (diagnostics functions)
■
■
■
■
■
■
■
Replacement of motors, encoders, ACOPOS/Danfoss frequency
inverters
Calibrating the servo axis
Reading, understanding and
using connection diagrams
Explanation of the parameters
Fully automatic gripper changeover (if used)
Gripper head
Spare parts documentation and
orders
Course objective:
A fault occurs – what now? The
target of this course is minimising unplanned production
downtimes. We provide you
with well-proven strategies on
how to react quickly and sensibly to malfunctions. With these
techniques, you will identify
causes of production losses as
quickly as you will eliminate
them.
Location:
Rosenheim (DE)
Dates/prices:
63
KRONES Competency Audit
How does your operator team cope
with the complex line technology?
Is training required, and if so, on
what issues? Our “Competency
Audit” provides objective answers
to such questions. We test during
running production how safely and
professionally the line is started,
operated, shutdown and converted.
64
The Competency Audit combines
theoretical questions with practical
exercises, and takes two to four
hours for each participant.
We recommend conducting this
assessment about six months after
a training or in cases in which the
performance is not what you expect
and you need a status and development plan.
Individual Documentation
We will be happy to help you with
all questions concerning scheduling,
organisation and performance of
the Competency Audit.
Please contact us.
SOP (Standard Operating Procedures)
Easy to understand step-by-step instructions
The KRONES Academy develops
individual SOPs for your company.
For this purpose, our experienced
technical writers develop work
instructions in cooperation with
your production staff. These handson instructions are easy to understand. Rich illustration and terse
text clearly depict the step-by-step
instructions.
We will be happy to help you with
all questions concerning scheduling, organisation and creation of
your individual documentation.
Please contact us.
65
Very often, mechanical sequences
and interrelationships can be identified and understood just through
intent observation. In the world of
electrics, sound knowledge that
has been acquired in trainings is
indispensable. Targeted training on
all electronic components, wiring
diagram systems, control systems
and drives as well as software and
touch-screen management convey
confidence for your daily production
66
routine with the krones line. No
matter whether a mechanic wants
to familiarise her- or himself with
the basics of electrotechnology, or
a maintenance manager wants to
increase the quality and efficiency
of the line by means of targeted
electrotechnology training: On the
following pages you will find the
adequate training package.
67
KRONES Electrical Technology – for Mechanical Maintenance Staff
Course: E 01; duration: 2 days
Target group:
maintenance managers, mechanical
maintenance staff, line managers
types: all krones fillers and labellers
Requirements:
Basic knowledge of the mechanics
of krones machines is beneficial
Topics:
■ krones wiring diagram system
■ Basics: bus system, AS-interface
■ Touch-screen with zenOn: type
management, user administration and data backup
68
■
krones standard encoders
(replacement and setting)
■ Diagnostics and replacement of
components
■ Data storage and recovery after
malfunctions
Locations:
São Paulo (BR), Johannesburg (ZA),
Lagos (NG), Nairobi (KE)
Dates/prices:
Course objective:
This course provides you
the option to acquire sound
knowledge on electrotechnology. This involves reading and
understanding wiring diagrams,
identifying electrical components and navigating on the
touch-screen. After conclusion
of the seminar, you will be able
to eliminate malfunctions on
your own and thus to reduce the
downtimes.
Contiform – Electrical Components
Target group:
types: all Contiform machines
Requirements:
Basic knowledge of stretch-blow
moulders
Topics:
■ Reading the KRONES wiring
diagram
■ Overview of the bus structure
■ AS-i bus: Basics
■ zenOn visualisation system
■ Diagnostics and replacement of
components, data backup
■
AS-i Safety at Work
(machine-specific)
■Powerlink
■ Profinet & Profibus
■ Heating controller HC-Net
■Troubleshooting
■ACOPOS
■Danfoss
■ Servo and linear motors
Locations:
Taicang (CN)
Dates/prices:
Course objective:
How can malfunctions on
the Contiform be quickly
eliminated? This course will tell
you. You will be provided with
valuable knowledge on the connection diagram and the various
components of the machine.
To enable you to react quickly
and systematically in your daily
production routine, various malfunctions will be simulated and
eliminated during the hands-on
section.
69
Filler – Electrical System (LCT3/KFS3 Controller)
Filler – Electrical System (FVC Controller)
Target group:
types: Mecafill, Sensometic,
Volumetic (all with LCT3 controller)
Requirements:
Basic knowledge of the machine
mechanics is beneficial
Topics:
■ System overview and communication channels
■ krones wiring diagram
■ AS-interface and Profibus basics
■ Danfoss FC300/VLT5000; MCT10
software
■ zenOn touch-screen
70
■
■
■
■
■
■
■
krones standard encoders and
sensors
Diagnostics and replacement of
components
KFS3 filling valve controller
Operation and parameterisation
on the LCT3
Filling valve and sensor
diagnostics
Parameter backup (software is
comprised in the krones scope
of supply)
Diagnostics and troubleshooting
Locations:
Dates/prices:
Course objective:
The quality and efficiency
reached in your production
is also a question of machine
controllers: To ensure a reliable
functionality here, you will learn
in the course how to understand
critical electrical parts, and how
to diagnose, repair and replace
them.
Target group:
■
types: Mecafill, Sensometic,
Volumetic (new generation)
■
Requirements:
Basic knowledge of mechanics
Topics:
■ System overview
■ krones wiring diagram in detail
■ Basics of the bus systems, AS-i
Safety at work, Profibus
■ Danfoss frequency inverter
FC300/MCT10 software
■ zenOn: type management, user
administration and data backup
■
■
■
■
■
■
■
■
Standard encoders and sensors
Diagnostics and replacement of
components
Machine malfunctions, fill level
and pressure control
FVC filling valve controller
Network structure: Ethernet,
Powerlink, E-link
Network diagnostics
Filling valve diagnostics
Operation and parameterisation
Replacing control elements
Diagnostics and troubleshooting
Course objective:
A high-quality production with a
minimum rejection is the target
of the seminar. You will learn
how to eliminate malfunctions,
do repair work, set the machine
and resume production after
failures. In order to verify your
training success at any time, you
will always have the opportunity
to interactively test your newly
acquired knowledge.
Locations:
Neutraubling (DE), São Paulo (BR)
Dates/prices:
71
Cold-glue Labeller – Electrical Components
Contiroll and Contiroll HS (B&R Controllers) – Electrical System
Course: E 06; duration: 3.5 days
Target group:
types: Vinetta, Universella,
Bonamatic, Starmatic, Solomatic,
Topmatic, Multimatic
Requirements:
Topics:
■ Basics: AS-i Safety at work,
Profibus
72
■
Danfoss FC300/VLT5000; MCT10
software
■ zenOn touch-screen type management, user administration
and data backup
■ Standard encoders and sensors
■ Diagnostics, replacement and
restorage of components
Location:
Franklin (US)
Dates/prices:
Course objective:
This course provides you with
a comprehensive overview of
the electronic system and the
functions of the labeller. What
you have learned enables you
to perform quick diagnostics
and to professionally eliminate
malfunctions.
Target group:
types: Contiroll Classic, Contiroll HS,
Contiroll module, Contiroll HS
module (B&R controller)
Requirements:
Topics:
■ AS-i Safety at work, Profibus
■ Danfoss FC300/frequency
inverter; MCT10 software
■ Main drive, synchronisation of
discharge conveyor
■ Touch-screen: type management,
user administration and data
backup
■
■
■
■
■
Special encoders, replacement
and setting
System overview, network and
communication
Machine functions, e.g. broken
bottle detection, height adjustment, infeed monitoring
Parameter structure, fine adjustment of the labelling station on
the touch-screen
Diagnostics, replacement of
components and data backup
Course objective:
In this seminar, you will acquire
valuable skills for machine
maintenance. You will learn
which servo drive fine adjustments are necessary to obtain
best labelling results.
Locations:
Bangkok (TH)
Dates/prices:
73
Contiroll 745 With LCT3 Controller – Electrical System
Modular Labeller Generation 2 – Electrical System
Target group:
■
types: Contiroll 745 with
LCT3 controller
■
Requirements:
Topics:
■ Profibus basics
■ Danfoss FC300/VLT5000; MCT10
software
■ Touch-screen with zenOn; data
backup
■ Replacing and setting the
encoder
74
■
■
■
■
Function and adjustment of all
sensors
Replacing electrical components
Parameterisation on the LCT3
Practical exercises on the training
machine
Creating and setting a new label
type
Diagnostics, replacement of components and data backup (LCT3)
Locations:
Bangkok (TH)
Dates/prices:
Course objective:
This course conveys the
necessary knowledge for
professionally repairing and
fine-adjusting the machine.
A higher product quality and
shorter downtimes make this
training a worthwhile investment.
Target group:
types: Modular labellers from year
of manufacture 2009 onward
Requirements:
Topics:
■ System overview, communication
and network
■ Basics of the bus systems, AS-i
Safety at work, Profibus
■ Danfoss frequency inverter
FC300/MCT10 software
■ Type management, user administration and data backup
■
■
■
■
■
■
Replacing and setting the 2-in-1
encoder
Diagnostics, replacement of
components and data backup
RPC rotary plate control system
with servomotors: function,
parameterisation, diagnostics,
motor replacement
Labelling stations (cold glue,
Autocol, APS3, Canmodul)
Function, diagnostics and troubleshooting
Data back-up
Course objective:
In this course, you will get a
comprehensive introduction
into parameterisation on the
touch-screen. This knowledge
will enable you to systematically
identify and eliminate faults.
In order to verify your training
success at any time, you repeatedly will have the opportunity
to interactively test your newly
acquired knowledge.
Locations:
Dates/prices:
75
Basics of the KRONES Electrical System
General krones Electrical System
Target group:
Electrical maintenance staff, line
managers
■
types: all KRONES machines
■
Requirements:
We recommend basic knowledge of
Siemens S7
Topics:
■ Subtleties of the KRONES electrical wiring diagram system
■ Basics of the AS-interface bus
system
■ Basics of the Profibus system
■ Frequency inverter Danfoss
FC300/VLT5000 and MCT10 software (uploading/downloading
parameters)
76
■
■
■
■
zenOn 5.5/6.2: Ghost/user
administration/data backup/type
management
krones standard encoders
KFS3/LCT3/KFS5 hardware and
filling program
Siemens PLC Step 7 software and
hardware configuration/uploading and downloading programs
Fault diagnostics and replacement of components
Data backup and recovery after
malfunctions
Locations:
Johannesburg (ZA), Nairobi (KE)
Course objective:
In this course you will learn how
to quickly eliminate possible
malfunctions, how to backup
data, identify faults and replace
electrical components. In addition, you will be introduced into
the user administration system
and you will get tips for correctly
using the touch-screen.
Target group:
Requirements:
systems
Topics:
Subtleties of the KRONES electrical wiring diagram system
■ Basics of the AS-interface bus
system
■
■
Basics of the Profibus system
Danfoss FC300/VLT5000 frequency inverters and MCT10
software
■ Touch-screen operating system
with zenOn software
■ Standard encoders
■
Locations:
Neutraubling (DE), Taicang (CN)
Dates/prices:
Course objective:
This seminar provides you with
a general view of the electrical
system which is used in almost
all of the Krones machines.
You will learn how to get the
machine ready for production
again quickly in the event of a
malfunction. The course focuses
particularly on the topics data
security, effective malfunction
diagnostics and replacement of
faulty electrical components.
Dates/prices:
77
Electrical System Training in the Laboratory
AS-i-Bus Safety
Target group:
Requirements: none
Topics:
■ Racos, hardware diagrams
■ Allen-Bradley ControlLogix or
Siemens S7
– Structure of the communication with the processor
– Flashing the firmware for the
components
– Hardware configuration
– Bus systems: AS-i bus, Profibus,
Ethernet, DeviceNet
– Diagnostics
78
■
zenOn touch-screen
– Type/recipe structure
– User administration
– zenOn explorer
■ B&R Automation
– Hardware overview
– ACOPOS drive diagnostics
– Runtime Utility Center Software, K-Dot Utility Software
■ Data back-up
– Parameter backup
– krones image back-up and
restoration utility
Locations:
Franklin (US), Taicang (China)
Course objective:
This course will provide you with
an overview of all of the electrotechnology that is used in the
krones equipment. If required,
we will bespoke the contents to
suit your requirements or your
machines.
Target group:
types: all KRONES machines with
Siemens S7
Requirements:
Basic knowledge of electrical equipment
Note:
This course is a supplement to the
course “Electrical System Training in
the Laboratory” (E 15).
Topics:
AS-i Safety function structure
■ Safe handling of the SIM card
and configuration on the SIM
card
■ Safe components replacement
■ Fault simulation and diagnostics
■
Course objective:
This training is a supplement
to the course “Electrical System
Training in the Laboratory”
(E 15). It will introduce you to
the AS-i bus.
Location:
Franklin (US)
Dates/prices:
Dates/prices:
79
Mechatronics Technology – Targeted Diagnostics
Target group:
Requirements:
Basic knowledge of the operation of
krones machines and of mechanical maintenance
Topics:
■ General machine safety practices
■ zenOn 6.20/6.22 HMI tools
■ Basics: electric components
80
■
HMI diagnostics MMA
Basics: pneumatic components
■Basics: krones encoder
■ Data backup
■Troubleshooting/workshop
■Assessment
■ Topics review and discussion
■
Location:
Franklin (US)
Dates/prices:
Course objective:
This seminar provides you with
a general view of the electrical
system which is used in almost
all of the Krones machines.
You will learn how to get the
machine ready for production
again quickly in the event of a
malfunction. The course focuses
particularly on the topics data
security, effective malfunction
diagnostics and replacement of
faulty electrical components.
81
The Overall Package for Best
Training Concepts
Nothing will happen in your production as if by magic. You rather need
precise knowledge about automation technology, the option to
quickly intervene into the software,
and suitable tools for a safe programming of the procedures.
krones offers the ideal overall
package for you with its Automation
Concept. In co-operation with you,
we will develop your individual
overall concept for all tasks of
Automation Technology tailored
perfectly to your needs.
Your success is based on three
elements:
■ Automation Engineer
■ Automation Equipment
■ Automation Notebook
Regardless if racks, machine simulation units, Notebook or training
offers, on the following pages, we
will inform you in detail about all
services of the krones Automation
Concept.
Contact:
Claudia Bruckbauer
Phone: +49 9401 70-1503
Fax: +49 9401 70 91-1503
E-mail: [email protected]
82
83
Automation
Siemens S7 for KRONES Machines – Basic Course
Siemens S7 for KRONES Machines – Advanced Course
Course: A 08; duration: 4 days
Target group:
Electrical maintenance staff, automation engineers
Siemens Step 7, V5.5
Requirements: none
Topics:
■Configuration:
– Hardware and peripheral components of a krones machine
– Subnet Profibus configuration
– Subnet Ethernet configuration
(optional)
– AS-i gateway using the example of B&R, Siemens CP343-2
84
■
Configuration of the user software
■ Data block types and editor (KOP/
FUP/AWL)
■ Communication with the subcontrollers/subsystems
■ Data backup
■Diagnostics
Locations:
Johannesburg (ZA), Lagos (NG),
Nairobi (KE), Bangkok (TH)
Dates/prices:
Course objective:
How can faults be identified
and eliminated quicker? How
can downtimes be prevented
and data be fully backed up?
This course will answer such
questions and provide concrete
solution strategies. The training
takes place in an excellently
equipped PLC laboratory.
You will learn the basics of
Siemens S7 programming for
krones machines, and understand the general principle of
the PLC.
Target group:
Siemens Step 7, V5.5
Requirements:
“Siemens S7 for krones Machines
– Basic Course” (A 08) or corresponding prior knowledge. Your
laptop should be equipped with the
Simatic Manager. We will be glad to
support you with the installation.
Topics:
■Configuration:
– Hardware and peripheral components of a krones machine
– Subnet Profibus configuration,
Profibus components
– Subnet Ethernet configuration
(TCP/IP protocol)
– AS-i gateway using the example of B&R, Siemens CP343-2
■ Network technology (Ethernet,
DP/DP coupler)
■ Accumulator/index function
■ Communication with HMI
■ Data backup/diagnostics
■ Indirect addressing, pointer and
address register
Locations:
Johannesburg (ZA), Lagos (NG),
Nairobi (KE), Bangkok (TH)
Course objective:
You want to delve into Siemens
S7? This course is the ideal
opportunity: You will learn
programming from scratch and
you will be familiarised with the
advanced functions of the software. Illustrative examples and
targeted exercises ensure that
you will be able to confidently
implement in practice what you
have learned in the course.
Dates/prices:
85
Automation
krones Visualisation Technology – zenOn Touch-screen Software
Target group:
zenOn 6.20/6.22)
Topics:
KRONES visualisation philosophy
■
■
■
■
■
86
Configuration of the hardware
and communications assemblies
File structures, project backup
and installation
Practical handling of the zenOn
tools
Krones emergency package
solution
Alarm handling, diagnostics and
interpretation of faults
zenOn Editor (project planning
environment)
■ Handling and functions of the
zenOn Explorer
■ Functions, menu structure of the
zenOn Editor, SQL-DB
■ Project manager work environment
■ Configuration of various dynamic
elements
■ Configuration of the variables list
■ Editing and adding malfunction
texts and warnings
■ Experimental setup exercises
Locations:
Bangkok (TH)
Dates/prices:
Course objective:
How does the krones visualisation technology work?
Illustrative practical examples
and hands-on exercises will help
you to gain quickly confidence
and expertise. In our training
laboratory, you will work on simulations in the current zenOn
6.20/6.22 development environment. After the seminar, you
will be able to perform modifications to the visualisation system,
to efficiently eliminate faults
and thus reduce downtimes.
zenOn – Emergency Package Installation
Course: A 11; duration: 0.5 days
Target group:
zenOn 6.20/6.22
Requirements:
“krones Visualisation Technology –
zenOn Touch-screen Software
(A 10)”
Please note:
You have to bring your own notebook on which the zenOn emergency package software will be
installed.
Topics:
Installing the zenOn software
■ zenOn software communication
■
■
and test
Emergency package: zenOn
5.50/6.20/6.22 installation
CDs, krones software (zenOn
explorer, fonts, etc.), USB dongle
software license, all connection
cables, documentation
Locations:
Bangkok (TH)
If you book this course together
with the seminar “krones Visualisation Technology – zenOn
Touch-screen Software” (A 10), the
software license will be included in
the seminar price.
Course objective:
What do you do when in the
event of a touch-screen failure? Wait until the problem
will be resolved or a substitute
has been delivered? You better
operate the machine with the
zenOn emergency package,
quite easily on the laptop or PC.
You will find out how to do this
in this seminar: It will show you
how to maintain the communication with the machine even if
failures occur.
Dates/prices:
87
Automation
IT System Technology – Basics
B&R Automation (Electrical System) – Workshop
Target group:
types: all krones machines
equipped with adequate software
Requirements:
“Siemens S7 for krones Machines
– Basic Course” (A 08) or corresponding prior knowledge
Topics:
KRONES visualisation philosophy
Networking technology basics
Electrical components of the
machine
– Danfoss frequency inverters
FC300/VLT500
■
■
88
– Reading the Racos wiring
diagram
– Absolute value encoder and
shift register
■ Network and control technology
– Network technology basics
– Profibus
– AS-interface
– HMI zenOn 6.20/6.22 visualisation system
Locations:
Dates/prices:
Course objective:
This course provides the opportunity to improve your existing
professional knowledge and
learn about IT system technology. You will acquire comprehensive understanding of network
and control technology. With
this newly acquired knowledge,
you will efficiently operate your
line and ensure clear communication with the machine with
ease.
Target group:
Electrical maintenance staff,
IT experts
Requirements:
Basic technical knowledge; basic IT
and PC knowledge
Topics:
■ B&R components used at
krones (system 2003/‘05/X20
etc.)
■ Drive technology basics: SDC
module, ACOPOS
■ B&R Automation Studio 3.0.8x
basics; integrated help system
CF creation according to krones
standard (Create Image)
■ Diagnostics for the most
common hardware and ACOPOS
■ B&R hardware components diagnostics
■
Optionally, you can buy a service
license for B&R Automation Studio
3.0.9x.
Locations:
Nairobi (KE)
Course objective:
Accomplished knowledge of the
IT system considerably reduces
the machine downtimes,
because it helps not only to
solve problems more quickly, but
also to prevent them in the first
place. This workshop conveys
comprehensive knowledge of
network and control system
technology. Practical devices
and training machines create a
realistic learning environment.
Dates/prices:
89
Automation
ControlLogix and DeviceNet Control Technology
Target group:
Topics:
■ Communication with the control
system
– Network addresses and alort
– Structure of the communication with RSLinx
Memory organisation
■Configuration
– Project structure
– Hardware and peripherals
– days and jobs
90
■DeviceNet
– RSNetWorx for DeviceNet
– Adding Flex I/O
– Mapping I/O data
– Scanner settings
Basic commands
Data backup
■Diagnostics
■
Location:
Franklin (US)
Course objective:
In a laboratory that has been set
up specifically for training, you
will learn to cope with hardware and software programming on test racks and training
machines. You will also be
familiarised with the diagnostics
functions for efficient troubleshooting.
Dates/prices:
91
Our Automation Concept is the
formula for your electronical and
automation specialists for accurate
diagnostics and optimisation of the
entire automation technology.
One concept, three components
■ KRONES Automation Equipment
Using different racks and
machine simulation units, all
staff members can learn and
deepen the ideal use and expand
their knowledge of handling the
machines – without any standstills during production.
■
■
KRONES Automation Notebook
It contains the required software
as well as all adapters necessary
for the diagnostics and data backup of your line.
KRONES Automation Engineer
We offer modular basic courses
and workshops for IT system
technology, for line documentation systems, for visualisation
systems as well as an automation
and network concept.
Benefits to you
■ Components that are attuned to
one another
The three elements of the
krones Automation Concept
can be used separately, as single
automation modules, or as interacting components.
■
Maximum efficiency for all automation tasks
Regardless if own staff members
or troubleshooting: The krones
Automation Concept is a benefit
for your production - in daily
operation on the machine and in
simulation sequences.
Automation Concept
Automation
Equipment
Automation
Engineer
Automation
Notebook
92
„Die magischen Dr
Automation Rack
Automation Noteb
Automation Engin
You will find the digital version of the
brochure under:
http://www.krones.com > Academy >
Automation Concept
93
KRONES Automation Equipment
KRONES Automation
Racks
You want to get the best out of your
automation training? The various
krones Automation Racks are the
ideal equipment to enhance your
knowledge after the training and to
develop your own programs.
S7 Rack
The basic module that is also used
in our trainings. Thanks to this
hardware, you can upload your own
projects, in connection with the
Siemens Step 7 software, without
having to interfere with the machines involved in production.
■ Developing and testing your own
programs
■ Holding automation courses
■ Practising components replacement
Touch-screen Rack
The extension with which you simulate your machine on your rack.
■ Importing and simulating existing machine projects
■ Holding machine trainings for all
employees
■ Holding zenOn touch-screen
software trainings
■ Editing your own projects
AS-i Safety Rack
The rack for making your engineers
fit for safety technology
■ Practising and testing with the
AS-i Safety components
■ Replacing the components
■ Mapping and simulating faults
on the touch-screen rack
■ Analysis and diagnostics on the
touch-screen rack
Each of the three IT racks will be
delivered installed ready to use
and tested in a specially developed
frame. We also provide aluminium
carrying cases for the racks to guarantee safe transport in a protective
housing.
Price: on request
Note:
For a full overview of our Automation Racks, please see the krones
website and our “Automation Concept” brochure.
95
KRONES Automation Notebook
Description
Regardless if for training support in
automation training or diagnostics
and troubleshooting in the line
– with the krones Automation
Notebook, you can start right away.
The krones Automation Notebook
contains the most important
krones software applications; all
required cables and adapters are
included in the scope of supply.
Accessories and expansions
As an option, the software
packages Allen Bradley RS Logix
5000 Standard Edition, B&R
Automation Studio 3.0.9x Maintenance Set, S7-PLCSim V5.4
simulation software or AsiMon
software with connection cable
can be obtained.
■
96
Learning objectives
■ Suitable for all training modules
in the field of automation
■ Developing and testing own programs (Step7, zenOn HMI, etc.)
■ Data back-up using krones
back-up and diagnostics tools
Technical data, scope of supply
■ DellE6540 with adequate equipment (professional series)
■ Krones software and utilities
according to specification in the
quotation
■ Pre-installed notebook with all
required krones software and
utilities, among other, with: Siemens Step7 SIMATIC Manager,
zenOn emergency package,
Microsoft® Office Home and
Business 2013
■ Acronis® Backup & Recovery™
■
Danfoss MCT 10 set.up software,
B&R-CPU diagnostics, K-DOT,
PDWIN, PDEXE, DCopy, EasyConfig, MOVITOOLS, DbaMGR2k
Benefits to you
■ Expanded fault diagnostics for
quick troubleshooting
■ All tools for data back-up already
installed
■ Communication interfaces,
cables and adapters for data
back-up and on-line connection
are included in the scope of
supply
■ Turn on the system and get started at once
■ zenOn emergency package contains: Machine control using the
Automation Notebook if systemrelevant hardware has failed
97
KRONES Automation Engineer
Your own expert
KRONES will support you with
all questions around automation
technology. Our objective is keeping
your staff always up to date with
the latest technology. With your
certificate of the krones Automation Engineer we will guarantee
high-quality enhanced training and
you will have your personal expert
on-site.
Modular design
In theoretical and practical units,
the future krones Automation
Engineers will learn
■ technology of krones
components
■ the optimum interaction of
network technology and control
technology
■ performing maintenance and
malfunction diagnostics without
any problems
■ minimising sources of errors in
the system
■ performing changes in the
program
■ performing safe and quick
data back-up
Individual and efficient
On his way to krones Automation
Engineer, the participant will only
take the courses he really needs
for his successful certification. The
krones course navigator will help
you to find the rights courses from
the broad offer.
Always up to date
At the end of the course, the participant will receive the krones certificate which is valid for two years.
This way, krones will guarantee
that the qualification of the owner
of the certificate is at the state of
technology.
Your way to the KRONES Automation Engineer
Level 0
Technology
basic
knowledge
Electrical
components
Step 7
KRONES
Electronics
engineer
Mechatronics
engineer
CLX
Controllogix
standard electrical system
KRONES
basics
IT systems
technology
basics
Preventative maintenance
Step 7
Maintenance
Troubleshooting
Electrical
components
B&R workshop hardware/tools
KRONES
Advanced
IT systems
technology
workshop
KRONES/
KRONES MES
KRONES/
KRONES
zenOn visualisation system
zenOn emergency package
Certificate
KRONES
Automation KAE
Engineer
(KAE)
Administration Continuous
Diagnostics
Improvement
Line Management
IT consultant
KRONES
line efficiency
SitePilot
Data/Backup
On-site Training Center: Automation Notebook and Automation Rack with introduction
98
99
The KRONES Course Navigator
Your individual course recommendation
The krones course navigator will
pave the way to successful completion of krones Automation
Engineer. Use the interactive navigation to test your knowledge in the
offered training modules and to
receive the optimal course recommendation. Afterwards, you can
order your personal offer with just
one click.
The time you will invest in the
krones course navigator will pay
off, because of the individual course
recommendation you ensure that
you will only select the courses that
are required for a successful certification for the krones Automation
Engineer.
You will find the KRONES course navigator under:
http://www.krones.com > Academy > Automation Concept
100
101
IT Solutions
IT solutions for the food and beverages industry
KRONES is the expert when it comes
to IT solutions too. Millions of
cans and bottles are processed on
krones lines every day – with the
help of krones IT solutions. To give
greater transparency to the range
available, krones has now developed a new common brand: SitePilot. “Site” stands for a complete,
networked factory, for integrated
production and logistics. “Pilot”
suggests steering, controlling, managing, high-tech.
102
krones SitePilot stands for IT
solutions from a single source
and describes the comprehensive
modular krones software system.
These products enable processes
to be planned, made transparent,
and documented. The individual
components give management and
employees targeted information
in real time on all production and
logistics processes, thereby facilitating the efficient control of the
processes.
103
IT Solutions
Recording Key Performance Indicators by Means of KRONES LDS
Course: IT 10; duration: 2 days
Target group:
Electrical maintenance staff, shift
supervisors, production managers
Suitable for the following software: Line documentation system LDS
Requirements: none
Topics:
■ Basics, hardware
■ Data Monitor
– Real-time line visualisation
– Operating statuses, counters,
trend values, flow charts
■ Data Chart: trend values, scaleable curve generation
■ DownalyseKit (optional)
– Downtime analysis of the lead
machine
104
– Quick access to production data
from any period of time
– Key factors such as efficiency,
MTTR, MTBF, OEE
– Own evaluations, export in
Excel
■ krones Webreport Manager
– Operating status report
– Malfunction analysis report
– Program report
– Product list
– Production report
– Customer-specific reports
Locations:
Dates/prices:
Course objective:
You are using krones LDS for
measuring the efficiency of your
line? Do you know all parameters of this tool? This seminar
makes you more familiar with
this instrument, starting with
the visualisation functions
in the DataMonitor up to the
standard reports in the Webreport Manager.
Administration of a KRONES LDS
Course: IT 11; duration: 0.5 days
krones Data: real-time data
Target group:
IT experts, electrical maintenance
staff, shift supervisors, production
managers
■
Suitable for the following software: Line documentation system LDS
Locations:
Requirements:
Participation in the course: “Recording Key Performance Indicators by
Means of krones LDS” (IT 10)
Dates/prices:
Topics:
■ Network overview, client/server
hardware
■ Data Archive
– Recovery of archived data bases
– Data security concepts
■
recording
Shift administration, user administration
Course objective:
the necessary skills for fulfilling
the role as LDS administrator
with expertise. You will gain a
basic understanding for the configuration of the program and
you will find out which safety
aspects must be considered. You
will learn how to backup and
restore data, and you will be
able to configure and administrate the shift system as well as
the users on your own.
105
IT Solutions
KRONES Line Performance Analyser LPA – Reports and Data Analysis
Course: IT 12; duration: 1 day
Target group:
Shift supervisors, production managers
Suitable for the following software: Line Documentation System LDS
and Line Performance Analyser LPA
Requirements:
Participation in course IT 10
Topics:
■ Introduction: Basics, requirements
■ Input: downtimes, time mode
■ Reports: dashboard, daily,
monthly, and annual reports
■ Order and product management
– Creating, processing and deleting orders (optional)
106
– Product management, status
report
■ Creating and editing downtime
classes
■ Operator panel (optional)
– Starting and ending production
orders
■ Classifying downtimes and
non-productive times of the lead
machine
– Assigning non-productive time
such as cleaning, change-over
etc.
– Classifying lead machine downtimes (filler or blow moulder)
Course objective:
The Line Performance Analyser
keeps an eye on your system and
“serves up” all of the key information you need in an easily
understandable format with
minimal effort on your part. To
help you get the best out of LPA
right from the start, we offer
this workshop. Learn in only one
day how to efficiently and safely
use this system!
KRONES Line Performance Analyser LPA – Data Input
Target group:
Operators
Suitable for the following software: Line Documentation System LDS
and Line Performance Analyser LPA
Requirements: none
Topics:
■ Introduction: basics, LDS
■ Operator panel (optional)
– Starting and ending production
orders
■
Classifying downtimes and
non-productive times of the lead
machine
– Assigning non-productive time
such as cleaning, change-over
etc.
– Classifying lead machine downtimes (filler or blow moulder)
Location:
Neutraubling (DE)
Course objective:
LPA supplies correct analyses only if you know how to
properly classify the downtimes
of the lead machine. With this
course, you will create a sound
basis for your daily work with
the Line Performance Analyser.
This is the best precondition for
the LPA to provide exactly those
analyses that you need.
Dates/prices:
Location:
Neutraubling (DE)
Dates/prices:
107
IT Solutions
KRONES Asset Management KAM
Network Technology – Configuration and Structure
Target group:
maintenance managers
Suitable for the following software: KRONES Asset Management KAM
Requirements: none
Topics:
■Introduction
– Working with the workbench
– Overview: equipment, staff
– Work instructions
– Maintenance schedule
– Maintenance order
– Creating messages
– Reporting
■Maintenance
108
■
Parts management
– Material storage
– Spare parts management
– Bookings, orders, reservations
■Configuration
– Basic configuration
– Extended personal and user
rights
– Shift configuration
– KAM configuration
Location:
Neutraubling (DE)
Course: IT 15; duration: 1 day
Course objective:
KRONES KAM can do a lot for
you. However, to fully benefit
from this instrument, you have
to understand what it is all
about. Spend four days with
our experts to gain a thorough
insight into the system and to
get answers to all of your questions. Profit from the knowledge
and the experience of our trainers and their practice-oriented
teaching methods.
Target group:
Automation engineers, IT experts,
Requirements:
PC knowledge
Topics:
■ OSI reference model
■ IP addresses and classes
■ IP structure in the network
■
Network topologies
■Hub/switch/router
■
Server architecture (DNS, DHCP,
data server
■ Troubleshooting with console
Location:
on-site
Dates/prices:
Course objective:
This course familiarises you with
the basics of network technology. You will learn to understand
the configuration of networks,
and how to cope with this
structure. The newly acquired
knowledge will finally enable
you to identify and eliminate
the causes of faults.
Dates/prices:
109
IT Solutions
Line Management System LMS
Line Management System LMS – Operation via the Machine Touch-screen
Target group:
Production managers, shift supervisors,Operators
Suitable for the following software: Line Management System LMS
Requirements: none
Topics:
■Introduction
– Working with the workbench
– Activating/deactivating the LMS
– Production process
– Troubleshooting
■ Order administration module
– Creating production orders in
the workbench
– Planning/starting orders in the
workbench
110
– Editing an order
– Deleting an order
– Starting an order on the
machine touch-screen
■ Material management module
– Creating, changing and deleting materials
– Working with finished goods
– Working with parts lists
■ Machine touch-screen
– Operating the LMS screens
– Infeed clear, production start,
end of production
– Special buttons
Course objective:
LMS helps you to reduce the
change-over times of your line.
In two and a half days of training, our experts will teach you
everything you need for fully utilising the productive efficiency
of your system. The higher line
availability quickly compensates
the investment.
Target group:
Operators
Location:
Neutraubling (DE)
Suitable for the following software: Line Management System LMS
Dates/prices:
Course objective:
You will learn how to use LMS on
the machine's touch-screen.
Requirements: none
Topics:
■ Machine touch-screen
– Operating the LMS screens
– Infeed clear, production start,
end of production
– Special buttons
Location:
Neutraubling (DE)
Dates/prices:
111
IT Solutions
Having a Grip on Spare Parts – Correctly Using KRONES SPMS
Strategic Maintenance and Planning System SIPS
Target group:
electrical maintenance staff, maintenance managers
Suitable for the following software: Strategic maintenance and planning
system (SIPS)
Requirements: none
Topics:
■ Introduction: basics, indicator
light, line overview
■ Jobs and instructions: activating,
cancelling, placing and acknowledging jobs
■Messages
– Triggering, clearing messages
– Creating jobs from messages
112
■Reports
– Preview
– Current feedback
– Expenditure of time and personnel
– History of orders and acknowledgements
– Cost report
■Settings
– People
– Options
– Configuration
Locations:
Dates/prices:
Course objective:
Krones SIPS is a powerful
instrument that helps you to
optimise your planning – however, only if the users are able
to handle all functions. In this
course, you will learn how to
activate or distribute jobs, how
to create reports and configure
new objects. After two days only,
you will be able to operate the
tool with ease so that you can
fully concentrate on your tasks.
Target group:
electrical maintenance staff, maintenance managers
Suitable for the following software: Spare Parts Management System
(SPMS)
Requirements: none
Topics:
■Introduction
– Basics
– Special considerations to be
observed for connecting the
parts kit to SPMS
■ Master data and inventory management:
– Recording parts, assigning
storage locations
– Incoming and outgoing goods
– Booking, ordering, inventory
■ Orders: creation, change, cancellation
■ Bookings: creation, change, cancellation
■Configuration
■Reports
– Inventory
– Consumption
– Purchase order
Locations:
Course objective:
Do you stock too many or not
enough spare parts?
Can you find every part at any
time? The krones SPMS tool
helps you to answer these
questions, provided that the
software is handled correctly. In
this course you will learn how to
use the software in such a way
that it helps you in organising
your parts and reducing the
downtimes.
Dates/prices:
113
Techniques and Methods
for Managers in the Beverage Industry
Your personal development as a
basis for the success of your company
Last year alone, more than 300
managers and line managers from
almost 20 different countries have
participated in the seminars and
workshops that we have held in
Africa, Asia, Europe and South
America.
In the filling and packaging industry,
the krones Management Training
is considered as a reference for the
114
development of managers which
provides you the opportunity to
acquire knowledge, establish a
network with other managers,
exchange experience and find
the best solution for yourself.
We encourage this with a wide
spectrum of training methods such
as action learning, best practice
examples, case studies and peer
coaching.
115
KRONES Technology for Decision Makers
Train the Trainer – Conveying Knowledge in the Industry
Course: M 03; duration: 5 days
Target group:
Line managers, shift supervisors,
plant managers, quality managers,
production managers
Requirements: none
Topics:
■ Overview of the individual
machines (PET blow moulders,
filler, labelling and inspection
machines, packing and palletising machines)
■ Significance of consumables
(preforms, caps, labels and glue)
116
■
Practical training and visits to the
production
■ Preventing malfunctions
■ Limits of the process
■ Future trends
This course takes place in Neutraubling (4 days) and Rosenheim (1 day).
Locations:
Neutraubling (DE), Rosenheim (DE)
Dates/prices:
Course objective:
Gaining an established insight
into the most important filling
and packaging machines in no
time: This is the objective of
“krones Technology for Decision Makers”. Get familiarised
with the critical points of your
line, the mastering of which
ensures efficiency on a sustained
basis.
Target group:
Line managers and shift supervisors
Requirements: none
Topics:
■ Basics of communication
■ Presentation techniques
■ Planning and preparing trainings
■ Breaking down resistance to
learning
■ Involving difficult participants
■ Checking the success of the
training
■
Understanding and accepting the
role as a trainer
■ Practical exercises with feedback
■ Simulation of training situations
on the machine or line
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
You have the expertise, and
you want to know how to pass
your knowledge on to others?
the necessary skills. Not only
will you be familiarised with
well-proven methodical and
educational basics, but you will
also learn how to effectively
motivate your participants. At
the end of the course, you will
be able to work out your own
seminars, trainings or instructions, and to develop and to
optimise them.
117
Line Efficiency 1 – Analysis and Optimisation of Existing Lines
Target group:
production managers
Requirements:
Initial experience as line manager
or shift supervisor
Topics:
■ Line layout
■ Buffer and acceleration output,
performance diagram
■ Measuring buffer times, line
productivity
■ Analysis tools
■ TCO (Total Cost of Ownership)
118
■
Key performance indicators – KPI
Organising routine jobs more
efficiently
■ Staff and their influence on the
line productivity
■
Locations:
Johannesburg (ZA), São Paulo (BR),
Bangkok (TH)
Dates/prices:
Course objective:
In this course, you will learn
how to calculate the main key
figure OEE and how to optimise
your line by manipulating the
various factors of influence.
With well-proven analysis tools,
you will identify the weak points
of every line. You will be able to
perform a cost and profitability
analysis, and to organise routine
tasks more efficiently. Moreover,
you will find out how to create
an action plan to increase line
efficiency. And, not least: how to
motivate yourself an others in
the long run.
Line Efficiency Plus
Target group:
production managers
Requirements:
Openness to intuitive methods
Topics:
as “Line Efficiency 1” (M 16) plus
the following contents:
■ Assuming the correct inner attitude as key to success
■ Discovering alternative solution
strategies with a larger angle of
observation
■ Decision making methods for
unclear situations
■
Developing a good solution in
apparently irresolvable solutions
■ Finding win-win solutions to the
satisfaction of all parties
■ New perspectives for identifying
causes without accusations
■ Identifying the negotiating position of other parties
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
This course comprises all topics
of module “Line Efficiency 1”
(M 16). Moreover, you will benefit from the following learning
targets: You will get concrete
approaches to the individual
situation in your company. By
using intuitive methods, you will
gain insight into deeper causes
of problems and you will learn
to fight them successfully.
119
Line Efficiency 2 – Implementation of Action Plans to Increase Efficiency
Target group:
production managers
Requirements:
Course “Line Efficiency 1 – Analysis
and Optimisation of Existing Lines”
(M 16) or comparable experience
Topics:
■ Retrospective: Experience with
the analysis from “Line Efficiency 1”
■ Typical reactions to changes
120
■
■
■
■
■
Basics of communication
Dealing with resistance
De-escalating communication
A convincing appearance –
“upward” as well as “downward”
Generating motivation and commitment
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
This course seamlessly continues module “Line Efficiency 1”.
It enables you to consequently
implement action plans for line
optimisation. You will also learn
how to appear in a convincing
manner – “upwards” as well as
“downwards”. The result: You
will know how to systematically motivate your staff and
win them over for necessary
changes.
Total Productive Management – Implementing TPM on
a Sustained Basis in the Beverage Industry
Target group:
Line managers, plant managers,
production managers, shift supervisors
Requirements:
Experience in the beverage industry
Topics:
■ Total Productive Management
■ The eight columns of TPM
■ The role of leadership in change
processes
■ Experience in implementing TPM
■
How to implement TPM: “All in
good time!”
■ Economic advantages of longterm thinking
■ Dos and don'ts
■ Discussion of individual situations
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
There is a decisive difference
between quick profits and
long-term optimisations. This
course explains to you what
Total Productive Management
is all about and which factors
determine the success of the
management system. Moreover,
concrete examples from the beverage industry illustrate how the
processes can be implemented
successfully in your company.
121
The SMED Method – How to Significantly Reduce Change-over Times
Target group:
Line managers, shift supervisors
Requirements:
Practical change-over experience is
preferable
Topics:
■ Recognising change-over as a
loss
■ Advantages of short change-over
times
■ Effects on the OEE
■ Success factors and rules for
quick change-over
■ Preparation of a change-over
workshop
122
■
Practical SMED on
krones Academy machines
– Recording the actual status
– Separating internal and external
times
– Identifying losses
– Organising the new process
– Creating a checklist
– Measuring change-over and time
savings
■ Visualisation of the results
■ Ensuring the sustainability
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
The abbreviation SMED (Single
Minute Exchange of Die) stands
for an effective method for
accelerating change-over on the
machine. This course will teach
you all you need to optimally
implement SMED: You will be
familiarised with the individual
steps of the method and you
will learn how to best instruct
and motivate your team in practice. Back in your factory you
will be able to moderate SMED
workshops and to significantly
reduce machine downtimes.
Aseptic Filling and Process Technology – Understanding and Function
Target group:
Line managers, production
managers
Requirements: none
Topics:
■ Advantages of aseptic filling
■ Definitions of terms and legal
foundations
■ Disinfection concepts
■ Performance and main cost
factors
■
Quality assurance
Special training requirements
and solutions
■ Project plan overview
■ Hygienic design
■ Hygienic measures catalogue
■
Location:
Neutraubling (DE)
Course objective:
In this course, you will gain
insight into different disinfection concepts and the relative
cost factors. The thus acquired
knowledge enables you to
adapt your organisation to the
demands of quality assurance
and hygiene concepts.
Dates/prices:
123
Aseptic Block Supervisor – Process Technology, Microbiology, Maintenance
124
Requirements:
Beverage and food-related
vocational training, e.g. beverage
engineers, brewers or dairy engineers, or comparable training
■ At least two years of experience
in the field of aseptic filling of
sensitive beverages as a shift
supervisor or QM/QA staff
■ Didactic abilities for passing on
knowledge
Topics:
Seminars module 1 (7 days)
■ Aseptic and hygiene basics
■ Microbiology of beverages –
practical training I
■ Aseptic filling and process technology I – configuration/method
of operation
■
Hygiene and
microbiology
As
k
loc
ep
tic
Problem Analysis
and
Troubleshooting
B
Supervisor
When does an aseptic line run
optimally? When the operators have
a perfect command of both the
technology and the hygienic environment. The training course for an
Aseptic Block Supervisor ensures
both aspects. That's because it is
directed at increasing the efficiency
and availability of the line with efficient troubleshooting. And it creates
the basis for a high level of microbiological safety and the reliable
compliance with quality standards.
System and Process
Understanding
■ LDS system training
■ Mechanical components in aseptic systems
■ Aseptic filling and process technology II – process sequences
and control
■ LDS user training
■ Aseptic filling and process technology III – troubleshooting
■ Maintenance – overhaul – restart
■ Practical training II on beverage
microbiology – killing test, log
rate
■ Critical hygiene points
■ Test and assessment
Location:
Neutraubling (DE)
Dates/prices:
Course objective:
As a trained Aseptic Block
Supervisor you will be well
versed with components and
processes of an aseptic line.
You will be able to conduct
targeted troubleshooting and
to identify and eliminate critical
hygiene points. Monitoring
the quality assurance will be
as easy for you as organising
maintenance sequences that
meet the hygienic requirements.
Moreover, the training enables
you to analyse and evaluate the
process sequences with the line
documentation system.
125
KOSΜE
Kosme designs and realises cus-
tomer-specific filling lines for the
international beverage, food, pharmaceutical and cosmetics industry
for the mid and low-performance
segments.
kosme – comprising the Austrian kosme GmbH and the Italian
kosme s.r.l. – offers a complete
line programme to complement the
portfolio of its parent company
krones, the global leader in the
high-performance segment for
beverage filling and packaging technology.
Kosme Italy contact:
Anna Pronesti
Kosme S.r.l. Unipersonale
Via Dell’ Artigianato 5
46048 Roverbella (MN)
Phone +39 0376751012
Fax
+39 3457282532
[email protected]
126
While kosme Italy concentrates
on labelling and filling technology and bundles the sales activities,
the Austrian arm of kosme handles
the development and production of
stretch blow moulding technology.
Kosme Austria contact:
Volker Ehrenhöfer
Kosme Gesellschaft mbH
Gewerbestraße 3
2601 Sollenau
Phone +43 2628 411 136
Fax
+43 676 88 411 136
[email protected]
127
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Price per participant
Location
Course-Nr.
Plastics Technology
P 01-1
Contiform – Operation
P 01-2
P 01-3
Designation
Language
Duration
Date
Location
English
3 days
upon request
upon request
Neutraubling/DE
Neutraubling/DE
Plastics Technology
English
2 days
upon request
upon request
Chinese
2.5 days
13 – 15 Jan 2015
1,500 RMB/day/participant Taicang/on-site/CN
Franklin/US
P 07-3
Filling Technology
Chinese
2.5 days
9 – 11 Jan 2015
German
3 – 4 days
27 – 30 April 2015
1.845 €/2.460 €
Neutraubling/DE
F 01-1
German
4 days
14 – 17 April 2015
2.460 €
P 02-2
English
3 – 4 days
upon request
1.845 €/2.460 €
Neutraubling/DE
F 01-2
English
4 days
upon request
2.460 €
Neutraubling/DE
P 02-3
English
4 days
upon request
upon request
Franklin/US
F 01-3
English
2 days
upon request
upon request
Franklin/US
P 02-1
Contiform – Basics
Filler Volumetic VODM/Modulfill VFS, VFJ
P 02-4
Chinese
2 days
17 – 18 March 2015
F 01-4
Spanish
2 days
upon request
upon request
Franklin/US
P 02-5
Chinese
2 days
11 – 12 August 2015
F 01-5
English
4 days
21 – 24 April 2015
21.400 THB
Bangkok/TH
Bangkok/TH
German
2 days
4 – 5 May 2015
1.230 €
Neutraubling/DE
F 01-6
English
4 days
9 – 12 Nov 2015
21.400 THB
P 03-2
P 03-1
German
2 days
12 – 13 Oct 2015
1.230 €
Neutraubling/DE
F 01-7
Chinese
4 days
3 – 5 May 2015
1,500 RMB/day/participant
Taicang/on-site/CN
P 03-3
English
2 days
upon request
upon request
Neutraubling/DE
F 02-1
German
4 days
3 – 6 March 2015
2.460 €
Neutraubling/DE
P 03-4
Filler Mecafill VKP/Modulfill HRS
English
2 days
15 – 16 Jan 2015
$ 1.225
Franklin/US
F 02-2
German
4 days
22 – 25 Sept 2015
2.460 €
Neutraubling/DE
German
2 days
30 Nov – 1 Dec 2015
1.230 €
Neutraubling/DE
F 02-3
English
4 days
upon request
upon request
Neutraubling/DE
P 04-2
English
2 days
upon request
upon request
Neutraubling/DE
F 02-4
English
2 days
upon request
upon request
Franklin/US
P 04-3
English
3 days
upon request
upon request
Franklin/US
F 02-5
Spanish
2 days
upon request
upon request
Franklin/US
P 04-1
P 05-1
P 05-2
German
2 days
10 – 11 March 2015
1.230 €
Neutraubling/DE
F 02-6
English
3 days
28 – 30 April 2015
21.400 THB
Bangkok/TH
German
2 days
29 – 30 Sept 2015
1.230 €
Neutraubling/DE
F 02-7
English
3 days
18 – 20 Nov 2015
21.400 THB
Bangkok/TH
Neutraubling/DE
P 05-3
German
2 days
2 – 3 Dec 2015
1.230 €
Neutraubling/DE
F 03-1
German
5 days
16 – 20 March 2015
3.075 €
P 05-4
English
2 days
upon request
upon request
Neutraubling/DE
F 03-2
Aseptic Filling With PET-Asept D
German
5 days
5 – 9 Oct 2015
3.075 €
Neutraubling/DE
P 05-5
English
3 days
upon request
upon request
Franklin/US
F 03-3
English
5 days
upon request
upon request
Neutraubling/DE
P 05-6
Chinese
3 days
19 – 21 May 2015
F 03-4
English
5 days
upon request
upon request
Franklin/US
P 05-7
Chinese
3 days
13 – 15 Oct 2015
F 03-5
Chinese
5 days
upon request
upon request
Taicang/on-site/CN
German
3 days
6 – 8 May 2015
1.845 €
Neutraubling/DE
F 04-1
German
5 days
22 – 26 June 2015
3.075 €
German
3 days
14 – 16 Oct 2015
1.845 €
Neutraubling/DE
F 04-2
English
5 days
upon request
3.075 €
P 07-1
128
P 07-2
Aseptic Filling With PET-Asept L
Neutraubling/DE
129
Neutraubling/DE
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
Filling Technology
F 04-3
Aseptic Filling With PET-Asept L
F 04-4
English
2 days
upon request
upon request
Chinese
3 days
14 – 16 April 2015
Franklin/US
L 02-13
Process Technology
EVOGUARD Valve Technology
B 09-2
B 10-1
Twin Flow System (TFS) – Operator Training
B 10-2
B 10-3
B 12-1
Botec F1 – Recipe Management
B 12-2
L 02-14
L 03-1
B 09-1
Designation
Language
Duration
Date
Location
Bangkok/TH
Contiroll HS Hotmelt Technology
English
3 days
18 – 20 May 2015
16,000 THB
Chinese
3 days
23 – 25 Nov 2015
16,000 THB
Bangkok/TH
German
4 days
17 – 20 Feb 2015
2.460 €
Neutraubling/DE
L 03-2
German
4 days
27 – 30 Oct 2015
2.460 €
Neutraubling/DE
L 03-3
English
4 days
upon request
upon request
Neutraubling/DE
English
3 days
11 –13 May 2015
$ 1.650
Franklin/US
English
3 days
5 – 7 Oct 2015
$ 1.650
Franklin/US
4 days
7 – 10 April 2015
21,400 THB
Bangkok/TH
German
1.5 days
18 – 19 June 2015
1.230 €
Neutraubling/DE
English
1.5 days
upon request
1.230 €
Neutraubling/DE
L 03-5
German
1 day
16 June 2015
615 €
Neutraubling/DE
L 03-6
English
1 day
upon request
upon request
Neutraubling/DE
L 03-7
English
German
1.5 days
upon request
1.230 €
Freising/DE
L 03-8
German
1 day
17 June 2015
615 €
Neutraubling/DE
L 04-1
English
1 day
upon request
upon request
Neutraubling/DE
L 04-2
L 04-3
L 04-4
KRONES Self-adhesive Technology APS 3 and 4
English
4 days
21 – 24 Sept 2015
21,400 THB
Bangkok/TH
German
2 days
12 – 13 March 2015
1.230 €
Neutraubling/DE
German
2 days
1 – 2 Oct 2015
1.230 €
Neutraubling/DE
English
2 days
upon request
upon request
Neutraubling/DE
English
2.5 days
22 – 24 April 2015
$ 1.375
Franklin/US
German
4 days
24 – 27 Feb 2015
2.460 €
Neutraubling/DE
L 04-5
Spanish
2.5 days
21 – 23 Oct 2015
$ 1.375
Franklin/US
L 02-2
German
4 days
15 – 18 Sept 2015
2.460 €
Neutraubling/DE
L 04-6
English
2 days
12 – 13 Feb 2015
£ 600
Bolton/UK
L 02-3
English
4 days
upon request
upon request
Neutraubling/DE
L 04-7
English
2 days
16 – 17 April 2015
£ 600
Bolton/UK
L 02-5
English
3 days
1 – 3 June 2015
$ 1.650
Franklin/US
L 04-8
English
2 days
11 – 12 June 2015
£ 600
Bolton/UK
L 02-6
English
3 days
15 – 17 June 2015
$ 1.650
Franklin/US
L 04-9
English
2 days
27 – 28 Aug 2015
£ 600
Bolton/UK
L 02-7
English
2 days
29 – 30 Jan 2015
£ 600
Bolton/UK
L 04-10
English
2 days
8 – 9 Oct 2015
£ 600
Bolton/UK
L 02-8
English
2 days
12 – 13 March 2015
£ 600
Bolton/UK
L 04-11
English
2 days
10 – 11 Dec 2015
£ 600
Bolton/UK
L 02-9
English
2 days
14 – 15 May 2015
£ 600
Bolton/UK
L 04-12
Chinese
2 days
21 – 22 April 2015
Taicang/on-site/CN
L 02-10
English
2 days
9 – 10 July 2015
£ 600
Bolton/UK
L 05-1
German
2 days
24 – 25 March 2015
1.230 €
Neutraubling/DE
L 02-11
English
2 days
24 – 25 Sept 2015
£ 600
Bolton/UK
L 05-2
English
2 days
upon request
upon request
Neutraubling/DE
English
2 days
5 – 6 Nov 2015
£ 600
Bolton/UK
L 05-3
English
2 days
upon request
upon request
on-site
L 02-1
130
L 02-12
Sleevematic 795 M for Shrink Sleeves
131
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
Designation
Language
Duration
Date
Location
German
3 days
19 – 21 May 2015
1.845 €
Neutraubling/DE
English
3 days
upon request
upon request
Neutraubling/DE
German
5 days
20 – 24 April 2015
3.075 €
Neutraubling/DE
Neutraubling/DE
L 05-4
Sleevematic 795 M for Shrink Sleeves
Chinese
2 days
14 – 15 July 2015
Taicang/on-site/CN
L 15-1
L 07-1
Change-over of Labellers – Workshop
German
2 days
upon request
upon request
on-site
L 15-2
L 07-2
English
2 days
upon request
upon request
on-site
L 16-1
L 07-3
English
2 days
upon request
upon request
Franklin/US
L 16-2
German
5 days
2 – 6 Nov 2015
3.075 €
English
2 days
8 – 9 Jan 2015
$ 1.098
Franklin/US
L 16-3
English
5 days
upon request
upon request
Neutraubling/DE
L 08-2
English
2 days
7 – 8 May 2015
$ 1.098
Franklin/US
L 17-1
German
4 days
30 March – 2 April 2015
2.460 €
Neutraubling/DE
L 08-3
English
2 days
17 – 18 Sept 2015
$ 1.098
Franklin/US
L 17-2
German
4 days
23 – 26 June 2015
2.460 €
Neutraubling/DE
L 08-4
English
2 days
26 – 27 Feb 2015
11,000 THB
Bangkok/TH
L 17-3
German
4 days
15 – 18 Sept 2015
2.460 €
Neutraubling/DE
L 08-5
English
2 days
8 – 9 Oct 2015
11,000 THB
Bangkok/TH
L 17-4
German
4 days
14 – 17 Dec 2015
2.460 €
Neutraubling/DE
English
3 days
4 – 6 May 2015
$ 1.650
Franklin/US
L 17-5
English
4 days
upon request
upon request
Neutraubling/DE
L 09-2
Spanish
3 days
9 – 11 Sept 2015
$ 1.650
Franklin/US
L 17-6
English
3.5 days
upon request
upon request
Franklin/US
L 09-3
English
3 days
2 – 4 March 2015
16,000 THB
Bangkok/TH
L 17-7
Spanish
3.5 days
upon request
upon request
Franklin/US
L 09-4
English
3 days
12 – 14 Oct 2015
16,000 THB
Bangkok/TH
L 17-8
English
3 days
12 – 14 Jan 2015
£ 900
Bolton/UK
L 09-5
Chinese
2 days
12 – 13 May 2015
Taicang/on-site/CN
L 17-9
English
3 days
9 – 11 Feb 2015
£ 900
Bolton/UK
L 09-6
Chinese
2 days
3 – 4 Nov 2015
Taicang/on-site/CN
L 17-10
English
3 days
9 – 11 March 2015
£ 900
Bolton/UK
German
2.5 days
upon request
upon request
on-site
L 17-11
English
3 days
13 – 15 April 2015
£ 900
Bolton/UK
L 11-2
English
2.5 days
4 – 5 May 2015
$ 1.098
Franklin/US
L 17-12
English
3 days
11 – 13 May 2015
£ 900
Bolton/UK
L 11-3
Spanish
2.5 days
upon request
upon request
Franklin/US
L 17-13
English
3 days
8 – 10 June 2015
£ 900
Bolton/UK
English
2.5 days
27 – 29 Oct 2015
$ 1.375
Franklin/US
L 17-14
English
3 days
6 – 8 July 2015
£ 900
Bolton/UK
Spanish
2.5 days
upon request
upon request
Franklin/US
L 17-15
English
3 days
7 – 9 Sept 2015
£ 900
Bolton/UK
German
2 days
26 – 27 March 2015
1.230 €
Neutraubling/DE
L 17-16
English
3 days
5 – 7 Oct 2015
£ 900
Bolton/UK
L 14-2
German
2 days
11 – 12 Nov 2015
1.230 €
Neutraubling/DE
L 17-17
English
3 days
2 – 4 Nov 2015
£ 900
Bolton/UK
L 14-3
English
2 days
upon request
upon request
Neutraubling/DE
L 17-18
English
3 days
7 – 9 Dec 2015
£ 900
Bolton/UK
English
2 days
upon request
upon request
Franklin/US
L 17-19
English
2 days
7 – 8 May 2015
18,800 THB
Bangkok/TH
L 08-1
L 09-1
L 11-1
L 11-4
Contiroll HS (High Speed) – Operator Training
Contiroll HS (High Speed) – Maintenance
Canmatic Labeller – Operation
Canmatic Labeller – Maintenance
L 11-5
L 14-1
132
L 14-4
Systematic Troubleshooting Using Contiroll HS
Contiroll Hotmelt Machine – Maintenance
Servicing the Cold-glue Machine
133
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
L 17-20
Designation
Language
Duration
Date
Location
German
4 days
6 – 9 Oct 2015
2.460 €
Neutraubling/DE
English
4 days
upon request
upon request
Neutraubling/DE
German
4 days
14 – 17 Dec 2015
2.460 €
Neutraubling/DE
English
2 days
29 – 30 Sept 2015
18,800 THB
Bangkok/TH
I 01-2
English
5 days
upon request
8.750 ZAR
Johannesburg/ZA
I 01-3
German
4 days
9 – 12 June 2015
2.460 €
Neutraubling/DE
I 02-1
L 18-2
German
4 days
17 – 20 Nov 2015
2.460 €
Neutraubling/DE
I 02-2
English
4 days
upon request
upon request
Neutraubling/DE
L 18-3
English
4 days
upon request
upon request
Neutraubling/DE
I 02-3
Chinese
3 days
20 – 22 Jan 2015
Taicang/on-site/CN
L 18-4
English
3 days
26 – 28 Jan 2015
£ 900
Bolton/UK
I 02-4
Chinese
3 days
25 – 27 Aug 2015
Taicang/on-site/CN
L 18-5
English
3 days
23 – 25 Feb 2015
£ 900
Bolton/UK
I 03-1
PET–View
English
3 days
upon request
upon request
on-site
L 18-6
English
3 days
30 March – 1 April 2015
£ 900
Bolton/UK
I 05-1
Checkmat 731 and 752
English
3 days
13 – 14 April 2015
$ 1.225
Franklin/US
L 18-7
English
3 days
27 – 29 April 2015
£ 900
Bolton/UK
I 05-2
English
3 days
7 – 8 Dec 2015
$ 1.225
Franklin/US
L 18-8
English
3 days
18 – 20 May 2015
£ 900
Bolton/UK
I 05-3
English
3 days
1 – 3 April 2015
16,000 THB
Bangkok/TH
L 18-9
English
3 days
22 – 24 June 2015
£ 900
Bolton/UK
I 05-4
English
3 days
4 – 6 Nov 2015
16,000 THB
Bangkok/TH
L 18-10
English
3 days
24 – 26 Aug 2015
£ 900
Bolton/UK
I 05-5
Chinese
2 days
16 – 17 June 2015
Taicang/on-site/CN
L 18-11
English
3 days
21 – 23 Sept 2015
£ 900
Bolton/UK
I 05-6
Chinese
2 days
22 – 23 Sept 2015
Taicang/on-site/CN
L 18-12
English
3 days
26 – 28 Oct 2015
£ 900
Bolton/UK
I 06-1
German
1 day
5 Oct 2015
615 €
Neutraubling/DE
L 18-13
English
3 days
23 – 25 Nov 2015
£ 900
Bolton/UK
I 06-2
English
1 day
upon request
615 €
Neutraubling/DE
L 18-14
English
3.5 days
upon request
upon request
Franklin/US
I 06-3
English
2 days
16 – 17 April 2015
$ 1.225
Franklin/US
L 18-15
Spanish
3.5 days
upon request
upon request
Franklin/US
I 06-4
English
2 days
10 – 11 April 2015
$ 1.225
Franklin/US
L 18-16
English
5 days
upon request
8.750 ZAR
Johannesburg/ZA
I 06-5
English
1 day
31 March 2015
11,000 THB
Bangkok/TH
German
2.5 days
15 – 17 June 2015
1.845 €
Neutraubling/DE
I 06-6
English
1 day
3 Nov 2015
11,000 THB
Bangkok/TH
L 19-2
German
2.5 days
23 – 25 Nov 2015
1.845 €
Neutraubling/DE
I 08-1
German
5 days
4 – 8 May 2015
3.075 €
Neutraubling/DE
L 19-3
English
2.5 days
upon request
upon request
Neutraubling/DE
I 08-2
German
5 days
28 Sept – 2 Oct 2015
3.075 €
Neutraubling/DE
I 08-3
English
5 days
upon request
upon request
Neutraubling/DE
German
5 days
22 – 26 June 2015
3.075 €
Neutraubling/DE
German
5 days
30 Nov – 4 Dec 2015
3.075 €
L 17-21
L 18-1
L 19-1
134
I 01-1
Cold-glue Module Machine
Cold-glue Labelling Station
Linatronic M2 Series – Basic Course
I 09-1
German
4 days
27 – 30 April 2015
2.460 €
Neutraubling/DE
I 09-2
Linatronic M2 Series – Basic Course
Linatronic M2 Series – Advanced Course
Checkmat 707
Modular Linatronic 735 – Basic Course
135
Neutraubling/DE
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
I 09-3
English
5 days
upon request
upon request
Neutraubling/DE
D 01-1
Language
Duration
Date
Location
E 02-1
German
3 days
16 – 18 June 2015
1.845 €
Neutraubling/DE
E 02-2
Contiform – Electrical Components
English
3 days
upon request
1.845 €
Neutraubling/DE
E 02-3
English
4 days
upon request
upon request
Franklin/US
Chinese
3 days
24 – 26 March 2015
Taicang/on-site/CN
German
3 days
23 – 25 June 2015
1.845 €
Neutraubling/DE
German
2 days
18 – 19 May 2015
1.230 €
Rosenheim/DE
E 02-4
D 01-2
English
2 days
upon request
1.230 €
Rosenheim/DE
E 03-1
D 01-3
Chinese
3 days
8 – 10 Sept 2015
on-site/CN
E 03-2
English
3 days
upon request
1.845 €
Neutraubling/DE
D 01-4
Chinese
3 days
8 – 10 Dec 2015
on-site/CN
E 03-3
English
3 days
upon request
upon request
Franklin/US
German
3 days
20 – 22 May 2015
1.845 €
Rosenheim/DE
E 04-1
German
3 days
13 – 15 Oct 2015
1.845 €
Neutraubling/DE
English
3 days
upon request
1.845 €
Rosenheim/DE
E 04-2
English
3 days
upon request
1.845 €
Neutraubling/DE
E 04-3
Spanish
3 days
upon request
1.185 €
São Paulo/BR
E 04-4
Portuguese
3 days
24 – 26 Feb 2015
1.185 €
São Paulo/BR
D 04-1
Non-returnables Packaging Technology
Designation
Robobox and Modulpal
D 04-2
E 01-1
Electrotechnology – for mech. Maintenance Staff German
Filler – Electrical System (LCT3/KFS3)
Filler – Electrical System (FVC)
2 days
11 – 12 June 2015
1.230 €
Neutraubling/DE
E 04-5
Portuguese
3 days
22 – 24 April 2015
1.185 €
São Paulo/BR
E 01-2
English
2 days
upon request
1.230 €
Neutraubling/DE
E 04-6
Portuguese
3 days
7 – 9 July 2015
1.185 €
São Paulo/BR
E 01-3
English
2 days
upon request
upon request
Franklin/US
E 04-7
Portuguese
3 days
19 – 21 Aug 2015
1.185 €
São Paulo/BR
E 01-4
English
2 days
upon request
upon request
Lagos/NG
E 04-8
Portuguese
3 days
21 – 23 Oct 2015
1.185 €
São Paulo/BR
E 01-5
English
2 days
upon request
upon request
Nairobi/KE
E 04-9
Portuguese
3 days
9 – 11 Dec 2015
1.185 €
São Paulo/BR
E 01-6
English
2 days
upon request
upon request
Johannesburg/ZA
E 05-1
Cold-glue Labeller – Electrical Components
English
2.5 days
upon request
upon request
Franklin/US
E 01-7
Spanish
3 days
upon request
1.185 €
São Paulo/BR
E 06-1
Contiroll and Contiroll HS – Electrical System
English
3.5 days
21 – 23 Oct 2015
2.460 €
Neutraubling/DE
E 01-8
Portuguese
3 days
3 – 5 Feb 2015
1.185 €
São Paulo/BR
E 06-2
English
3.5 days
upon request
2.460 €
Neutraubling/DE
E 01-9
Portuguese
3 days
24 – 26 March 2015
1.185 €
São Paulo/BR
E 06-3
English
2 days
24 – 25 Sept 2015
$ 1.225
Franklin/US
E 01-10
Portuguese
3 days
21 – 23 May 2015
1.185 €
São Paulo/BR
E 06-4
English
2 days
5 – 6 Oct 2015
$ 1.225
Franklin/US
E 01-11
Portuguese
3 days
16 – 18 June 2015
1.185 €
São Paulo/BR
E 06-5
English
3 days
9 – 11 March 2015
16,000 THB
Bangkok/TH
E 01-12
Portuguese
3 days
9 – 11 Sept 2015
1.185 €
São Paulo/BR
E 06-6
English
3 days
19 – 21 Oct 2015
16,000 THB
Bangkok/TH
Portuguese
3 days
25 – 27 Nov 2015
1.185 €
São Paulo/BR
E 07-1
German
3 days
19 – 21 May 2015
1.845 €
136
E 01-13
Contiroll 745 (LCT3) – Electrical System
137
Neutraubling/DE
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
Designation
Language
Duration
Date
Location
Automation
Siemens S7 for krones Machines – Basics
English
3 days
upon request
1.845 €
Neutraubling/DE
A 08-2
German
4 days
5 – 8 May 2015
2.460 €
Neutraubling/DE
E 07-3
English
2 days
upon request
upon request
Franklin/US
A 08-3
German
4 days
15 – 18 Sept 2015
2.460 €
Neutraubling/DE
E 07-4
English
3 days
26 – 28 May 2015
16,000 THB
Bangkok/TH
A 08-4
German
4 days
27 – 30 Oct 2015
2.460 €
Neutraubling/DE
E 07-5
English
3 days
24 – 26 Aug 2015
16,000 THB
Bangkok/TH
A 08-5
English
4 days
upon request
upon request
Neutraubling/DE
English
4 days
27 – 30 Oct 2015
2.460 €
Neutraubling/DE
A 08-6
English
4 days
once a month
upon request
Franklin/US
E 09-2
English
4 days
upon request
2.460 €
Neutraubling/DE
A 08-7
English
4 days
2 – 6 Feb 2015
8.200 ZAR
Johannesburg/ZA
E 09-3
English
2 days
upon request
upon request
Franklin/US
A 08-8
English
4 days
1 – 5 June 2015
8.200 ZAR
Johannesburg/ZA
English
10 days
16 – 27 March 2015
290 €/day/participant
Nairobi/KE
A 08-9
English
4 days
7 – 11 Sept 2015
8.200 ZAR
Johannesburg/ZA
E 12-2
English
10 days
15 – 26 June 2015
Nairobi/KE
A 08-10
English
4 days
13 – 16 April 2015
Nairobi/KE
E 12-3
English
10 days
5 – 16 Oct 2015
Nairobi/KE
A 08-11
English
4 days
20 – 23 July 2015
Nairobi/KE
E 12-4
English
10 days
4 – 15 May 2015
32.000 ZAR
Johannesburg/ZA
A 08-12
English
4 days
9 – 12 Nov 2015
Nairobi/KE
E 12-5
English
10 days
20 – 31 July 2015
32.000 ZAR
Johannesburg/ZA
A 08-13
English
4 days
13 – 16 April 2015
1.800 €
Lagos/NG
E 12-6
English
10 days
20 – 31 Oct 2015
32.000 ZAR
Johannesburg/ZA
A 08-14
English
4 days
20 – 23 July 2015
1.800 €
Lagos/NG
German
3 days
8 – 10 June 2015
1.845 €
Neutraubling/DE
A 08-15
English
4 days
9 – 12 Nov 2015
1.800 €
Lagos/NG
E 14-2
English
3 days
upon request
1.845 €
Neutraubling/DE
A 08-16
English
4 days
10 – 13 Feb 2015
21,400 THB
Bangkok/TH
E 14-3
Chinese
3 days
17 – 19 Nov 2015
1,500 RMB/day/participant Taicang/CN
A 08-17
English
4 days
8 – 11 Sept 2015
21,400 THB
Bangkok/TH
English
3.5 days
upon request
upon request
A 09-1
German
4 days
16 – 19 June 2015
2.460 €
Neutraubling/DE
E 15-2
Chinese
3 days
21 – 23 July 2015
A 09-2
German
4 days
8 – 11 Dec 2015
2.460 €
Neutraubling/DE
E 15-3
Chinese
3 days
15 – 17 Dec 2015
A 09-3
English
4 days
upon request
upon request
Neutraubling/DE
E 07-2
E 09-1
E 12-1
E 14-1
E 15-1
Contiroll 745 (LCT 3) – Electrical System
Modular Labeller Gen. 2 – Electrical System
Basics of the krones Electrical System
General krones Electrical System
Electrical System Training in the Laboratory
Franklin/US
Siemens S7 for Krones machines – Advanced
E 16-1
AS-i Bus Safety
English
0.5 days
upon request
upon request
Franklin/US
A 09-4
English
4 days
9 – 13 Feb 2015
8.200 ZAR
Johannesburg/ZA
E 17-1
Mechatronics Technology – Targeted Diagnostics English
2.5 days
once a month
upon request
Franklin/US
A 09-5
English
4 days
8 – 12 June 2015
8.200 ZAR
Johannesburg/ZA
A 09-6
English
4 days
14 – 18 Sept 2015
8.200 ZAR
Johannesburg/ZA
A 09-7
English
4 days
24 – 29 July 2015
Nairobi/KE
A 09-8
English
4 days
13 – 18 Nov 2015
Nairobi/KE
138
A 08-1
Automation
Siemens S7 for krones Machines – Basics
German
4 days
9 – 12 Feb 2015
2.460 €
Neutraubling/DE
139
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
Automation
Siemens S7 for Krones machines – Advanced
Designation
Language
Duration
Date
Location
Automation
English
4 days
17 – 22 April 2015
Nairobi/KE
A 14-2
German
2 days
1 – 2 Dec 2015
1.230 €
Neutraubling/DE
A 09-10
English
4 days
24 – 29 July 2015
1.800 €
Lagos/NG
A 14-3
English
2 days
upon request
upon request
Neutraubling/DE
A 09-11
English
4 days
13 – 18 Nov 2015
1.800 €
Lagos/NG
A 14-4
English
2 days
once a month
upon request
Franklin/US
A 09-12
English
4 days
17 – 20 Feb 2015
21,400 THB
Bangkok/TH
A 14-5
English
2 days
23 – 24 April 2015
Nairobi/KE
A 09-13
English
4 days
14 – 17 Sept 2015
21,400 THB
Bangkok/TH
A 14-6
English
2 days
30 – 31 July 2015
Nairobi/KE
A 09-14
English
4 days
once a month
upon request
Franklin/US
A 14-7
English
2 days
19 – 20 Nov 2015
Nairobi/KE
German
2 days
17 – 18 Feb 2015
1.230 €
Neutraubling/DE
A 15-1
ControlLogix and DeviceNet Control Technology English
4 days
once a month
upon request
Franklin/US
A 10-2
German
2 days
22 – 23 June 2015
1.230 €
Neutraubling/DE
A 10-3
German
2 days
24 – 25 Nov 2015
1.230 €
Neutraubling/DE
A 10-4
English
2 days
upon request
upon request
Neutraubling/DE
IT 10-1
German
2 days
20 – 21 April 2015
1.230 €
Neutraubling/DE
A 10-5
English
2 days
once a month
upon request
Franklin/US
IT 10-2
English
2 days
upon request
1.230 €
Neutraubling/DE
A 10-6
English
2 days
23 – 24 Feb 2015
11,000 THB
Bangkok/TH
IT 10-3
English
3 days
upon request
upon request
Franklin/US
A 10-7
English
2 days
21 – 22 Sept 2015
11,000 THB
Bangkok/TH
IT 11-1
German
0.5 days
22 April 2015
615 €
Neutraubling/DE
German
0.5 days
19 Feb 2015
615 €
Neutraubling/DE
IT 11-2
English
0.5 days
upon request
615 €
Neutraubling/DE
A 11-2
German
0.5 days
24 June 2015
615 €
Neutraubling/DE
IT 11-3
English
0.5 days
upon request
upon request
Franklin/US
A 11-3
German
0.5 days
26 Nov 2015
615 €
Neutraubling/DE
IT 12-1
German
1 day
23 April 2015
615 €
Neutraubling/DE
A 11-4
German
0.5 days
upon request
upon request
Neutraubling/DE
IT 12-2
English
1 day
upon request
615 €
Neutraubling/DE
A 11-5
English
0.5 days
once a month
upon request
Franklin/US
IT 13-1
LPA – Data Input
German
0.5 days
24 April 2015
615 €
Neutraubling/DE
A 11-6
English
0.5 days
25 Feb 2015
2,700 THB
Bangkok/TH
IT 13-2
English
0.5 days
upon request
615 €
Neutraubling/DE
A 11-7
English
0.5 days
23 Sept 2015
2,700 THB
Bangkok/TH
IT 14-1
KAM – KRONES Asset Management
German
4 days
19 – 22 May 2015
2.460 €
Neutraubling/DE
English
4 days
upon request
2.460 €
Neutraubling/DE
Network Technology – Configuration
German
1 day
21 Sept 2015
615 €
on-site
English
1 day
upon request
615 €
on-site
German
2 days
upon request
1.230 €
Neutraubling/DE
A 09-9
A 10-1
A 11-1
A 12-1
Visualisation Technology – zenOn Software
zenOn – Emergency Package Installation
IT Solutions
German
2 days
25 – 26 June 2015
1.230 €
Neutraubling/DE
IT 14-2
A 12-2
English
2 days
upon request
upon request
Neutraubling/DE
IT 15-1
A 12-3
English
2 days
once a month
upon request
Franklin/US
IT 15-2
German
2 days
28 – 29 April 2015
1.230 €
Neutraubling/DE
IT 17-1
A 14-1
IT System Technology - Basics
B&R Automation – Workshop
B&R Automation – Workshop
LDS – Recording Key Performance Indicators
LDS – Administration
LPA – Reports and Data Analysis
LMS – Line Management System
2015 seminars
Course-Nr.
Designation
Language
Duration
Date
Location
Course-Nr.
Language
Duration
Date
Location
English
2 days
upon request
upon request
Neutraubling/DE
M 16-4
English
2 days
upon request
1.590 €
Bangkok/TH
M 16-5
Portuguese
2 days
upon request
upon request
São Paulo/BR
M 16-6
English
2 days
upon request
9.000 ZAR
Johannesburg/ZA
IT Solutions
IT 17-2
IT 18-1
LMS – Operation via the Machine Touch-screen
IT 18-2
IT 20-1
Strategic Maintenance and
Planning System (SIPS)
Designation
Management–Training
English
2 days
upon request
1.230 €
Neutraubling/DE
German
0.5 days
upon request
615 €
Neutraubling/DE
English
0.5 days
upon request
615 €
Neutraubling/DE
M 16-3
Line Efficiency 1 – Analysis and Optimisation
of Existing Lines
German
2 days
22 – 23 Sept 2015
1.230 €
Neutraubling/DE
IT 20-2
English
2 days
upon request
1.230 €
Neutraubling/DE
M 16-7
English
2 days
upon request
9.000 ZAR
Johannesburg/ZA
IT 20-3
English
3 days
upon request
upon request
Franklin/US
M 16-8
English
2 days
22 – 23 Oct 2015
$ 1.775
Franklin/US
German
2 days
24 – 25 Sept 2015
1.230 €
Neutraubling/DE
M 16-9
English
2 days
20 – 21 Oct 2015
$ 1.775
Franklin/US
IT 21-2
English
2 days
upon request
1.230 €
Neutraubling/DE
IT 21-3
English
3 days
upon request
upon request
Franklin/US
2 days
upon request
upon request
Neutraubling/DE
2 days
upon request
upon request
Neutraubling/DE
2 days
upon request
upon request
Neutraubling/DE
IT 21-1
Spare Parts – Correctly Using krones SPMS
M 17-1
Line Efficiency 2 – Implenatation of action plans
German
to increase efficiency
M 17-2
Management–Training
M 03-1
KRONES Technology for Decision Makers
M 03-2
M 06-1
Train the Trainer – Conveying Knowledge
in the Industry
M 06-2
M 12-1
Aseptic Filling and Process Technology –
Understanding and Function
M 12-2
M 16-1
M 16-2
Line Efficiency 1 – Analysis and Optimisation
of Existing Lines
German
5 days
13 – 17 April 2015
3.975 €
Neutraubling/DE
English
5 days
9 – 13 Nov 2015
3.975 €
Neutraubling/DE
M 18-1
M 18-2
English
2 days
upon request
upon request
Neutraubling/DE
Aseptic Block Supervisor – Process Technology,
Microbiology, Maintenance
English
20 days
upon request
upon request
Neutraubling/DE
English
20 days
upon request
upon request
Neutraubling/DE
SMED – How to Reduce Change-over Times
German
2 days
23 – 24 April 2015
1.590 €
Neutraubling/DE
M 21-2
German
2 days
19 – 20 Nov 2015
1.590 €
Neutraubling/DE
M 21-3
German
2 days
upon request
upon request
Neutraubling/DE
German
3 days
17 – 19 March 2015
2.385 €
Neutraubling/DE
M 26-2
German
3 days
13 – 15 Oct 2015
2.385 €
Neutraubling/DE
M 26-3
German
3 days
1 – 3 Dec 2015
2.385 €
Neutraubling/DE
German
2 days
upon request
upon request
Neutraubling/DE
M 19-1
English
2 days
upon request
upon request
Neutraubling/DE
M 19-2
German
2 days
29 – 30 Sept 2015
1.590 €
Neutraubling/DE
English
2 days
upon request
upon request
Neutraubling/DE
German
2 days
21 – 22 April 2015
1.590 €
Neutraubling/DE
German
2 days
17 – 18 Nov 2015
1.590 €
Neutraubling/DE
English
Total Productive Management – Implementing
German
TPM on a Sustained Basis in the Beverage Industry
M 21-1
M 26-1
Line Efficiency Plus
Academy
Böhmerwaldstraße 5
93073 Neutraubling
Germany
Phone +49 9401 70-6414
Fax +49 9401 70-916414
[email protected]
Internetwww.krones.com
Subject to technical changes · Printed in Germany · 0 900 22 883 0 · Druckerei Aumüller GmbH & Co. KG · 4,000en · 09/14
krones ag

Program 2015

Transcription

Similar documents

Auction April 30th

krones Variopac Pro The automatic all

Tuesday, November 18, 2014

magazine 1.2013 | 24

krones LinaFlex Pasteurising with the highest efficiency

krones Canmatic The machine for wrap

krones Robogrip The multi-functional packing and palletising robot

krones Contiroll The machine for wrap-around, reel

1,75 MB Krones Autocol Flexibility with pressure

krones Cold-glue labellers The classic labellers