PDF - Dextra Group

Highspot LED
PRODUCT SPECIFICATION
INTRODUCTION
With the ever increasing efficiency of high power LEDs and the availability of a wide range of lenses on the market
standalone emergency LED luminaires now often provide the most cost effective and simple solution for emergency lighting
in a wide range of applications. With the ability to control the distribution with a range of lens types the optical distribution can
be tailored to your application allowing you to maximise spacings between luminaires minimising installation cost and energy
use.
The Dextra Highspot LED is supplied with an IP65 polycarbonate, light grey housing ensuring it can be used in a range of
applications where protection from dust, dirt, water and light impact is required. With three lens options the optical
distribution can be tailored for high level open areas, low level open areas and racking aisles in storage applications.
Offering 500 lumen output the Highspot LED is designed specifically for high level applications or where very wide spacings
between luminaires must be achieved.
The emergency function can also be tailored to offer standard, self test and autotest emergency ensuring that the ongoing
cost of emergency testing can be minimised.
APPLICATION
Food/Clean Area
Industrial/Manufacturing
Parking/Exterior
Warehouse/Storage
T: 01747 858100 | E: [email protected] | Page 1 of 4
Highspot LED
PRODUCT SPECIFICATION
SPECIFICATION
Construction
IP65 polycarbonate, light grey housing.
High power Lumileds LED.
Performance
Output up to 500 lumen.
Emergency
Available with self test, autotest and central battery options.
Installation
IP65 housing can be drilled for surface or trunking mounting.
Variations
Available with 3 lens options for a range of distributions for open area, racking aisles and low level applications.
IMAGES
Product Images
TECHNICAL
T: 01747 858100 | E: [email protected] | Page 2 of 4
Highspot LED
PRODUCT SPECIFICATION
HIGHSPOT LED
WARRANTY
All Dextra products are supplied with a 12 month warranty for any defect that may occur with the product during this time.
Any defect will either be repaired on site free of charge or the defective product may be replaced on a chargeable basis and
credit given against defective product returned. The course of action taken will be at our discretion and dependent on the
nature of the defect.
The control gear within our high frequency and LED luminaires is further underwritten by our suppliers for a period of up to 5
years in total from the time of purchase. This comprises labour and parts for the first 3 years and free of charge components
only for the final 2 years.
PROTEC LED FR 8W GU10 variants and Emergency LED ranges are exempt from the 5 year warranty and are supplied with
1 year warranty only. PROTEC LED COB luminaires are supplied with a two year warranty for replacement luminaires only.
All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation or
unsuitable environmental conditions.
It is the duty of the customer to ensure that all relevant tests have been carried out prior to requesting site visits or
replacement products, for example replacement of lamps, commissioning of sensors and inspection of external wiring. In the
event that no defect is found with the product our costs for attending site will be recharged to the customer and credit will not
be issued against returned products.
No consequential losses incurred resulting from any defect with our product will be reimbursed.
Consumable commodities such as lamps, starters and batteries are excluded from these warranty terms. Batteries are
supplied with a twelve month warranty only.
5 year warranty on LED product ranges is subject to a maximum of 4000 operating hours per year and only applies where
failures exceed the component manufacturers expected failure rate and lumen depreciation.
T: 01747 858100 | E: [email protected] | Page 3 of 4
Highspot LED
PRODUCT SPECIFICATION
If you require any assistance with regards to our products please do not hesitate to contact our Customer Services
department on 01747 858100.
ORDER CODES
Luminaire Codes
Code
Description
HSP LED NM3 UW
Highspot LED, Non Maintained
HSP LED NM3 OA
Highspot LED, Non Maintained
HSP LED NM3 UHR
Highspot LED, Non Maintained
Optic
Code
Description
OA
Open Area Lens
UW
Ultra Wide Lens
UHR
Ultra High Rack Lens (racking aisle)
Emergency
Code
Description
ST3
Self Test
AT3
Autotest Emergency
T: 01747 858100 | E: [email protected] | Page 4 of 4